RAMSET AUTOMATIC GATE SYSTEM RAM3100DC-PE High Traffic Swinging Gate Operators

Litlhaloso

Tšireletso ea Heke Litaelo tsa Bohlokoa tsa Tšireletso

Litlhaloso Kakaretso:

• UL Gate Classification: RAM 3000, RAM 3100, RAM 30-30 DC
• Khokelo ea Motlakase: E kenyelelitsoe
• Wire Gauge: Sheba buka ea litaelo bakeng sa litlhoko tse khethehileng

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenya

• Setšoantšo sa Wiring sa Fektheri: Latela setšoantšo se fanoeng bakeng sa ho kenya ka nepo.
• Tataiso ea ho seta ka potlako ea MEP: Sebelisa tataiso ena ho theha Monitored Entrapment Protection.
• BOM (BILL OF MATERIALS): Sheba karolo ea Bill of Materials bakeng sa likarolo tse hlokahalang.

Lintlha tsa ho Kenya

• RAM 3000s/ 30-30 Kaho ea Letlapa la Konkreite: Latela litaelo tse tobileng bakeng sa kaho ea liphaephe tsa konkreite.
• Phetoho ea Maeto a Heke: Fetola kamoo ho hlokahalang bakeng sa ts'ebetso e nepahetseng ea heke.
• Phatlalatso ea Tšohanyetso: Itloaetse mokhoa oa tokollo ea tšohanyetso.
• Sebaka sa Ts'ebetso / Bolelele ba Matsoho: Fumana sebaka se nepahetseng le bolelele ba letsoho bakeng sa ts'ebetso ea heke.
• Lits'ebetso tsa Compact / Tloaelo: Latela litataiso bakeng sa ho kenya li-compact kapa tloaelo.

Entrapment & Tshireletso Tshireletso

• Mefuta ea ts'ireletso ea tšireletseho: Utloisisa le ho kenya ts'ebetsong mefuta e fapaneng ea tšireletso e boletsoeng bukeng ea tataiso.
• Wiring ea Leihlo ea Lifoto e Shebetsoeng (EMX-NIR-250-325): Hokela mohala oa leihlo la foto ho latela litaelo.
• Sebaka sa Tšireletso ea Entrapment: Hlalosa le ho boloka sebaka sa tšireletso ea entrapment joalokaha ho hlalositsoe.

LBH

• Ke lokela ho sebelisa sekala sefe sa terata bakeng sa ho hokela motlakase?
  
  • Tekanyo e khethehileng ea terata e hlokahalang e tla itšetleha ka likarolo tsa motho ka mong le ho seta. Sheba karolo ea wire gauge bukeng ea litaelo bakeng sa lintlha tse qaqileng.
• Nka lokisa leeto la heke joang?
  
  • Ho lokisa leeto la heke, latela litaelo tse fanoeng karolong ea Gate Travel Adjustment ea bukana. Hangata e kenyelletsa ho etsa liphetoho ho mochine oa heke.
• Monitored Entrapment Protection (MEP) ke eng?
  
  • MEP ke karolo ea ts'ireletso e lulang e beha leihlo maemo a ka bang teng lerabeng le ho tsosa mehato ea ts'ireletso ho thibela likotsi. Sheba ho MEP Quick Setup Guide bakeng sa tlhahisoleseding e eketsehileng mabapi le ho e beha.

Tlhokomediso FEELA KE SETEKENE SE SEBELE LE MAITSEBELO FEELA SE LOKELA HO KENYA, HO BOLOKA KAPA TŠEBELETSO ENA KAPA MOSEBETSI OA KETE O MANG.

BOHLOKOA POLOKETSO LITAELO

TLHOKOMELO - Ho fokotsa kotsi ea kotsi kapa lefu:

1. BALA LE HO LATELA LITAELO TSOHLE.
2. Le ka mohla u se ke ua lumella bana ho sebetsa kapa ho bapala ka li-control tsa liheke. Boloka remote hole le bana.
3. Kamehla u behe batho le lintho hole le heke. HA HO MOTHO EA LOKELANG HO TLOA TSELA YA KETE E TSAMALANG.
4. Lekola opareitara ea heke khoeli le khoeli. Heke E TLAMEHA ho furalla ha e kopana le ntho e thata kapa e emise ha ntho e kenya li-sensor tse sa amaneng le tsona. Kamora ho lokisa matla kapa moeli oa leeto, leka hape mokhanni oa heke. Ho hloleha ho lokisa le ho lekola botjha mosebeletsi wa heke hantle ho ka eketsa kotsi ya kotsi kapa lefu.
5. Sebelisa tokollo ea tšohanyetso feela ha heke e sa sisinyehe.
6. BOLOKA LIKITI TSE HLOKOMENG. Bala bukana ea mosebelisi. E-ba le batho ba nang le litsebo feela ba lokelang ho lokisa liheke tsa hardware.
7. Monyako ke oa likoloi feela. Batsamai ba tlameha ho sebelisa menyako e arohaneng.
8. BOLOKANG LITAELO TSENA.

KAKARETSO KHABANE

MOHLALA	DCRAM3000	DC RAM 3100	DC RAM 3030
MAXGATE KHOLO	2,000 lik'hilograma	2,500 lik'hilograma	3,000 lik'hilograma
MAX KETE BOLELELE	22′	22′	20′
LEBELO LEBELO	90 ° ka metsotsoana e 15 (e fapana ka matsoho le ho daela kapele)	90 ° ka metsotsoana e 15 (e fapana ka matsoho le ka potlako)	90 ° ka metsotsoana e 15 (e fapana ka matsoho le ho daela kapele)
MOTSAMAI	Brushless 24VOC, 25A, 520W	Brushless 24VOC, 25A, 520W	Brushless 24VOC, 25A, 520W
MOSEBETSI SETJHEKHA	TS'ELISO TSOHLE	TS'ELISO TSOHLE	TS'ELISO TSOHLE
AC MATLA MAKHETHA	115V, 60Hz 230V, Hz tse 60	115V, 60Hz 230V, Hz tse 60	115V, 60Hz 230V, Hz tse 60
LIBETIRI	(2) 7Ah 12V Libetri	(2) 7Ah12V Libetri	(2) 7Ah12V Libetri
SEKOAHELO LIEKETSENG	23″ X 18″ X 28.5″	23″ X 18″ X 28.5″	23.5″ X 17.5″ X 28.5″

HLOKOMELA: Litekanyo tsohle le bokhoni bo bukeng ena ke tsa lits'ebetso tse tloaelehileng. Mefuta e meng kaofela ea ho kenya e ka fokotsa bokhoni le litekanyo bukeng ena.

Lebelo la heke le itšetlehile ka geometry ea matsoho le lebelo la ho daela (sheba leqephe la 17).

LITLHAKISO TSA BOHLOKOA TŠEBELETSO KA MAEMO A UL

• Kenya opareitara ea heke ha feela:
  1. Opereishene e loketse kaho ea heke le Sehlopha sa ts'ebeliso ea heke,
  2. Lipulo tsohle tsa heke ea li-slide tse tšekaletseng li
     e sirelelitsoeng kapa e sirelelitsoeng ho tloha botebong ba heke ka bonyane ba 1.83 m (6 ft) ka holim'a lefatše ho thibela bophara ba bophara ba 57.2 mm (2-1/4 inch) ho feta ka masoba kae kapa kae hekeng, le moo. karolo ea terata e haufi eo heke e e koahelang sebakeng se bulehileng;
  3. Libaka tsohle tsa phanele ea heke e theohileng ea pivot ho tloha tlase ho heke ho ea holimo ho heke kapa bonyane ba 1.83 m (72 in) ka holimo ho grade, ho sa tsotellehe hore na ke efe e fokolang, e fetang ka ntho e tsitsitseng, le sebakeng seo. ea terata e haufi eo heke e e koahelang nakong ea leeto la heke, e tla raloa, e lebeloe kapa e sirelelitsoe ho thibela bophara ba 57 mm (2-1/4 in) bophara ba ho feta. libaka.
  4. Lintlha tsohle tse pepeneng tsa pinch lia tlosoa kapa lia lebeloa, 'me
  5. Tlhokomelo e fanoa bakeng sa lirolara tse pepesitsoeng.
  6. Litaelo tsa opareitara li tla thathamisa palo e kholo ea lisebelisoa tsa tšireletso tse bulehileng le tse koaletsoeng tse khonang ho hokeloa ho opareitara.
• Opereishene e reretsoe ho kenya feela lihekeng tse sebelisetsoang likoloi. Batsamaisi ba maoto ba tlameha ho fuoa sebaka se arohaneng sa ho kena. Sebaka sa ho kena ho ba tsamaeang ka maoto se tla etselitsoe ho khothaletsa tšebeliso ea batsamai. Beha heke e le hore batho ba se ke ba kopana le heke ea likoloi nakong eohle ea leeto la heke ea likoloi.
• Heke e tlameha ho kenngoa sebakeng e le hore ho fanoe ka tumello e lekaneng pakeng tsa heke le mehaho e haufi ha e bula le ho koala ho fokotsa kotsi ea ho kenngoa. Liheke tse tsoelipanang li ke ke tsa buleha libakeng tseo batho ba kenang ho tsona.
• Heke e tlameha ho kenngoa hantle 'me e sebetse ka bolokolohi ka litsela tse peli pele ho kenngoa ha mochine oa heke. Se ke oa tiisa ho feta tekano clutch ea opareitara kapa valve ea ho fokotsa khatello ho lefella heke e kentsoeng hampe, e sa sebetseng hantle kapa e senyehileng.
• Bakeng sa basebelisi ba liheke ba sebelisang tšireletso ea Mofuta oa D:
  1. Litaolo tsa opareitara ea heke li tlameha ho beoa e le hore mosebelisi a be le botlalo view sebakeng sa heke ha heke e tsamaea;
  2. Polakate joalo ka ha e hlokoa ke 62.1.6 e tla beoa haufi le litsamaiso,
  3. Sesebelisoa se koalang ka boiketsetso (joalo ka sebali sa nako, loop sensor, kapa sesebelisoa se ts'oanang) se ke ke sa sebelisoa, mme
  4. Ha ho sesebelisoa se seng se tla hokela.
• Litaolo tse kenngoeng ka ho sa feleng tse reretsoeng hore li kenngoe ke mosebelisi li tlameha ho behoa bonyane 1.83 m (6ft) hole le karolo efe kapa efe e tsamaeang ea heke le moo mosebelisi a thibeloang ho fihla, ka tlase, ho potoloha kapa ka heke ho tsamaisa litaolo.
• Mokhelo: Litaolo tsa phihlello ea maemo a tšohanyetso tse fihlellehang feela ke basebetsi ba lumelletsoeng (mohlala, mapolesa a litima-mollo, EMS) li ka beoa sebakeng leha e le sefe sebakeng sa 1 se sa bonahaleng sa heke.
• Konopo ea Stop le/kapa Reset e tlameha ho beoa moleng oa pono ea heke. Ho kenya tshebetsong taolo ya ho seta botjha ho keke ha etsa hore opareitara e qale.
• Ho tla kenngoa bonyane ba mabeli (2) MATŠOAO A TEMOSO, sebakeng sa heke. Letlapa le leng le le leng le lokela ho bonoa ke batho ba ka thōko ho heke eo plakate e kentsoeng ho eona. Hape sheba 62.1.1.
• Bakeng sa basebelisi ba liheke ba sebelisang sensor e sa amaneng le batho ho latela 32.1.1:
  1. Sheba litaelo mabapi le ho beoa ha li-sensor tse sa amaneng le mofuta o mong le o mong oa ts'ebeliso,
  2. Tlhokomelo e tla sebelisoa ho fokotsa kotsi ea ho khoptjoa, joalo ka ha koloi, e hatela sensor ha heke e ntse e tsamaea, le
  3. Sensonsa e le 'ngoe kapa tse ngata tseo e seng tsa khokahanyo li tla fumaneha moo kotsi ea ho ts'oaroa kapa tšitiso e leng teng, joalo ka sebaka se fihlellehang ka heke e tsamaeang kapa mokoallo.
• Bakeng sa opareitara ea heke e sebelisang sensor ea ho ikopanya ho latela 32.1.1:
  1. Sensororo e le 'ngoe kapa ho feta moo ho ka bang le kotsi ea ho tšoasoa kapa ho sitisoa, joalo ka moeling o ka pele, moeling o ka morao, le ho beoa ka morao le ka ntle ho heke ea selaete e tšekaletseng ea koloi.
  2. Sensora e le 'ngoe kapa ho feta e tla beoa pheletsong e tlase ea heke ea phahamiso e emeng ea koloi.
  3. Sensora e le 'ngoe kapa tse 'maloa tsa ho ikopanya li tla ba sebakeng se tlase sa heke ea pivot ea koloi.
  4. Sensor ea ho ikopanya e thata e tla fumaneha 'me mohala oa eona o hlophisoe e le hore puisano pakeng tsa sensor le opareitara ea heke e se ke ea senyeha ha mochini.
  5. Sesebediswa se se nang waelese se kang se fetisang matshwao a radio frequency (RF) ho opareitara ya heke bakeng sa tshireletso ya setlamo se tla bewa moo phetiso ya matshwao e sa sitisweng kapa e sitiswang ke meaho ya moaho, popeho ya naha kapa tšitiso e tshwanang. Sesebelisoa sa waelese se tla sebetsa tlas'a maemo a reriloeng a ho qetela a tšebeliso.
  6. Mochini o le mong kapa ho feta oa ho kopana o tla beoa ka hare le ka ntle moeling o ka pele oa heke e swing. Ho feta moo, haeba moeli o ka tlase oa heke ea swing o moholo ho feta 152 mm (6 in) empa o ka tlase ho 406 mm (16 1n) ka holim'a lefatše ka nako efe kapa efe sebakeng sa eona sa maeto, sensor e le 'ngoe kapa ho feta e tla ba teng moeli o ka tlase.
  7. Sensora e le 'ngoe kapa ho feta e tla beoa pheletsong e ka tlase ea mokoallo o otlolohileng (letsoho)

BOIKARABELO TSA MOHLOLI/ MOTHEEKI WA KETE
RAMSET KETE EA SEBELISA HO KENYA FEELA, HO BOLOKOA KAPA HO SEBELETSOA KE SETSEBANE SE SEBELETSENG, SE NA LE MAIKUTLO A MANG LE KOETELO E NEPAHETSENG.

• BALA LE U UTLOISISA MOKAO OOHLE WA TAELO PELE O QALA HO KENYA FEELA
• SEBELISA MOTSAMAISI E NEPAHETSENG. NAHANA:
  • KAROLO (SLIDE, HO SEKETSA KAPA HO HLOMELA KA HO FETISISA)
  • MOFUTA (STANDARD, UPHILL, COMPACT, ... ETC.)
  • Litekanyo tsohle le bokhoni bo bukeng ena ke tsa lits'ebetso tse tloaelehileng. Mefuta e meng kaofela ea ho kenya e ka fokotsa bokhoni le litekanyo bukeng ena.
  • MELAO YA KETE (I, II, Ill or IV) bona karolo ya UL gate classification
  • KGORO BOIMA LE MOETO
• U SE KE U FETISA LITLHAKISO TSA LIHLOOHO LE BOKHONI BA Opereishene LE HARDWARE.
• netefatsa hore Opereishene E NA LE MOTHEO O SIRELETSENG (sheba karolo ea lintlha tsa ho kenya)
• HA U SEBELISA MOSEBETSI OA KETE KA TSOHLE U ETSA TLHAHLOBO EA SYSTEM YOHLE YA KETE (Heke, KETE OPERATOR, HO KENYA LE MOHLASE/WIRING) LE HO ETSA LITLHAHISO TSEFE LE TSOHLE, HO MOTHO E LE MOTHO, HO TLA TSAMAISA TSAMAISO EA TSONA. 325 LE MAEMO A TŠIRELETSO A ASTM F2200.
• TLHOKOMELISO E SAENENG HA E HLOKOMELE MOLAMO EA MOSEBETSI/SETHECNICIAN KA TABA EA HORE HA E NA MOTHO TSEKONG E AMANENG MOTHO OA LENYATSO O SA TŠEENENG TEMELO.
• HA HO HLOKAHALA, kenya SURGE / KHATELLO EA LEBEDI LE LITHUTO TSA MOFA.
• TŠIRELETSO KE NTHO E MAHALA E TSOANG HA U KENYA MOSEBETSI OA KETE
• ETSA HORE U LATELA LIKHOUTU TSOHLE TSA UL 325 LE ASTM F2200 SAFETY.
• KEI EFE KAPA EFE E SA SEBELISANG MOTHO E TLOANG HO SEBELISA E TLA Ntlafatsoa HORE E KAMETLE HO MAELANA LE MAEMO TSOHLE a ASTM F2200.
• HA MOSEBETSI OA KETE E HLOKA HO PUSELETSOA, KETE E LENG TENG E TLA TLAFATSWA HO MAMELANA LE MELAO YOHLE YA ASTM F2200 LE UL325 YA Tshireletseho.
• HA KITI YA MOSEBETSI OA KHATE E SEBELISANG E HLOKA PUSETSO, KETE E NCHA E TLA KOPELA MAEMO TSOHLE a ASTM F2200.
• SEBELISA FEELA UL 325 LITLHOKOMELISO LE LITLHOKOMELISO.
• SEBELISA FEELA LISEBELISA TSE AMOHELISITSENG TSA SIRELETSO EA SEBAKA TSE LENGOLONG LENGOLONG ENA.
• SEBELISA HORE LIBAKA TSOHLE TSA KAROLO LI SIRELETSOE KE LITHOA TSE AMOHELILENG TSA TŠIRELETSO EA LITABA.
  • ENTRAPMENT ZONE: Libaka tse pakeng tsa heke e tsamaeang le moeli o hanyetsanang le moeli kapa bokaholimo moo ho ka khonehang ho fihla ho 6 ft. Libaka tse joalo li etsahala haeba nakong efe kapa efe leetong, lekhalo pakeng tsa heke e tsamaeang le mathōko kapa bokaholimo bo sa feteng li-inch tse 16.
• DISEBEDISO TSE DUMELLWENG TSA TŠIRELETSO EA KAROLO:
  • EMX NIR 50-325
  • EMX IRB-RET
  • EMX IRB-MON
  • OMRON E3K-R1 0K4
  • Setšoantšo sa SECO-LARM E931-S50RRGQ
  • Setšoantšo sa SECO-LARM E936-S45RRGQ
  • MILLER EDGE – PRIME GUARD
  • MILLER EDGE - NAHANA! MOLEBELI
• HA HO SESEBETSI SA TŠIRELETSO SE LOKELANG HO FETOTSOA, HO TLOSWA KAPA HO HLOKOMELA KE MOHLOMI/SETHEHEKI.
• MOLAO OHLE O TLAMEHA HO BOSA BOHLOKOA MAOTO A 6 HO LE HO LE KAROLO EFE EA MOSEBETSI OA KETE KAPA KETE E TSAMAEA KA NAKO TSOHLE.
• LITEISHELE TSA TAOLI KA HARAKARE LI LOKELA HO KENYA HO SEBELISA MOSEBETSI A NA LE MOLAO OO OO OO OA PONO OA LEBAKA LA KETE O LAOLANG.
• MAHLO A PHOTO LOKELA HO KENYA KA NAKO EA 5 INTS HO ​​TLOHA PANEL EA HERO LE BOHLOKO BA BOHOLO BA 27.5 inch.
• DINTLHA TSOHLE TSE HLAHISITSWENG TSA PINCH LI FELISOA KAPA LI HLOKOA.
• LIROLA TSOHLE TSE HLAHANG LI HLOKOA.
• MATSHWAO A TEMOSO A TSHWANETSE HO KAMEHWA KA HO SA FELENG LEPHANENG LA KETE SEBENG SE BONANG HAHOLO SE KA BONWANG HABOHOLO HO TLOHA MATLHAKONG KA BOBELI A KETE.
• BAKENG SA BATSAMAA KA TSAMAA KA TSAMAA MABAKA MAHALA A KETE EA MOSEBETSI EA KOLOI, HO TLA FUMANA LEHETE E A AHOLO.
  • KGORO YA BATSAA KA                                                                hiyo  hiyo  YA TSAMAA KA                                 ]          sa  KOLO                                                                               
  • KGORO YA BATSAA KA KATAMAOA E SE KE YA KENYELETSOA KA HO PHANELLO YA MOTHO E SEBETSANG YA KOLOI.
• LIKITI LI TLA ETSOA, HO HLOMELA LE HO KENYA HORE MOTSAMAO OA ONA O SE KE WA THOA KE MOKHOA OA HAHOLO HA MOTSAMAI OA AUTOMATIC O KHAOA.

DIBULO TSOHLE LI TLA ETSOA, HO HLOKOMELISOA KAPA HO TŠOANTSOA HO TLOHA KA TLAS'A KETE HO FIHLELA KAROLO EA KEITI KAPA BONYENYANE BA 72″ KA HOLIMO MPHATO, HO FEELA E TLASE, HO THIBELA LEBAKA LA 2 ¼” DIAMETER HO FETELA MONA. KGORO, LE HO TSEO KAROLO EA LEKHOASO LE HAPA LE LEKHOTLO LE KOPANENG LE KETE MAEMO A BOLOTSENG. LEBAKA LA KETE LE TLA KAKARETSA KAROLO KAOFELA YA KETE E TSAMAISANG, HO kenyeletswa LE FOREMO EFE KA EFE EA MORAO KAPA KAROLO E THOLAHANG YA KITI.

TSEBISO EA BOHLOKOA BAKENG SA NTLO

TIISETSO TSEBISO

• Tlatsa ka botlalo 'me u romele ho (Ka lengolo le tiisitsoeng) CARD ea hau ea WARRANTY REGISTRATION pele matsatsi a 90 a kentsoe ho:
  • Litlhaloso tsa likarolo tsa Ramset Automatic Gate Systems, Inc.
  • 9116 De Garmo Ave
  • Sun Valley, CA 91352
• KARETE YA HO NGOLISA TIISETSO le yona e ka tlatswa ho rona websebakaRAMSETINC.COM>.
• Bala 'me u utloisise setifikeiti sa hau sa tiisetso.
• Tiisetso ea Ramset e koahela feela opareitara khahlanong le liphoso tsa moetsi.
• Botsa mohahi/setsebi hore na tiisetso ya tshebeletso ya bona ke efe. (Mosebetsi ha o koaheloe tlas'a waranti ea Ramset).
• Litaba tsohle tsa Warranty le likopo li tlameha ho lopolloa ke setsebi sa liheke.

PELE MOTHO WA HAO A TSAMAEA:

• Botsa setsebi sa hau ka likarolo tsohle tsa Ramset Gate Operator ea hau e ncha.
• Etsa bonnete ba hore heke e tsamaea hantle ntle le ho sisinyeha ho feteletseng, ho qhoma kapa lerata.
• Etsa bonnete ba hore lisebelisoa tsohle tsa hau li sebetsa hantle (lihoutu, li-keypad, lisebelisoa tsa ho kena ka mohala, li-loops tsa ho tsoa, ​​li-loops tsa polokeho, li-loops tsa phantom, li-sensors tsa moeli ... joalo-joalo).
• Etsa bonnete ba hore setsebi sa hau se u fa litokomane tse latelang tse kentsoeng ka har'a opareitara e 'ngoe le e' ngoe:
  1. Karete ea Ngoliso ea Tiisetso
  2. Setifikeiti sa Tiisetso
  3. Leqephe la Tlhahlobo
• Etsa hore setsebi sa hau se u fe pontšo ea mokhoa oa ho sebelisa tokollo ea tšohanyetso:
  1. Pedal ea Leoto
  2. Chain Drop
  3. Ho lokolloa ha lever ea letsoho
  4. Ho lokolloa ha trolley ka letsoho
• E-re setsebi se u bontše sekhechana sa heke phanele ea hau ea motlakase.
  • Ho fanoa ka label e nang le opareitara e 'ngoe le e' ngoe ho tšoaea se robehileng hantle.
• Etsa bonnete ba hore mahlo a foto ea tšireletso kapa lithōko li kentsoe ka nepo tsamaisong ea heke ea hau.
  • Bonyane ba 1 Leihlo la foto / moeli o sireletsang tsela e koalang.
• KENO ENA KE EA LIKOLOI FEELA. Batho ba tsamaeang ka maoto ba lokela ho fuoa monyako o arohaneng.
  • Heke ea batho ba tsamaeang ka maoto e lokela ho behoa e le hore heke e kenang ea likoloi e se ke ea tšela kapa ea kopana le heke ea ba tsamaeang ka maoto ka nako efe kapa efe.
  • Heke ea batho ba tsamaeang ka maoto e ke ke ea kengoa ka har'a phanele ea keiti ea likoloi.
• Matshwao a tlhokomediso a tlameha ho kenngwa lehlakoreng ka leng la heke (ka hare le kantle) sebakeng se bonahalang haholo.

KA MOR'A MOTS'EOA OA HAO A TLOHILE

• Kamehla boloka likamano tse ntle le setsebi sa hau sa theknishiene 'me u boloke nomoro ea bona ea mohala e le teng bakeng sa tlhokomelo kapa maemo a tšohanyetso a tlang.
• Litaba tsohle li lokela ho lebisoa ho setsebi sa hau.
• Ha ho khoneha, tima sekhechana sa potoloho ho opareitara pele u sebelisa sistimi ea tokollo ea tšohanyetso.
• Ha ho motho ntle le setsebi sa heke se hloahloa, se nang le boiphihlelo, ea lokelang ho tlosa sekoaelo kapa lemati la ho kena ho opareitara ea heke.
• Ke setsebi sa liheke feela se nang le tsebo, se nang le boiphihlelo se lokelang ho sebetsa, ho hlokomela, ho hloekisa, ho lokisa kapa ho fana ka litšebeletso ho moetsi oa heke.
• Boloka liheke li hlokometsoe hantle. E-ba le ts'ebeletso e nang le boiphihlelo, e nang le boiphihlelo, e nang le boiphihlelo, sistimi ea opareitara ea heke le lisebelisoa tsa heke hoo e ka bang likhoeli tse ling le tse ling tse 6 ho isa ho selemo.
• Kamehla hlahloba lisebelisoa tsohle tsa polokeho bakeng sa ts'ebetso e nepahetseng. Sena se kenyelletsa mahlo a lifoto, li-loops, mathōko ... joalo-joalo.
• Sheba khafetsa tokollo ea hau ea tšohanyetso le sistimi ea ho boloka betri (haeba e hlokahala) bakeng sa ts'ebetso e nepahetseng.
• Le ka mohla u se ke ua lumella bana ho sebetsa kapa ho bapala ka li-control tsa liheke. Boloka litaolo hole le bana.
• Le ka mohla u se ke ua lumella bana hore ba bapale sebakeng se haufi le heke kapa keiti.
• Le ka mohla u se ke ua lumella mang kapa mang ho palama, ho hloella ka tlas'a kapa ho hloa heke.
• Kamehla u behe batho, bana le lintho tse ling hole le heke ha heke e ntse e sebetsa.
• Ha ho motho ea lokelang ho tšela sebaka sa heke e tsamaeang.
• Boloka sebaka se potolohileng heke se hloekile 'me se se na lithōle.
• Boloka sebaka se potolohileng heke se se na likokoanyana le litoeba. Likokoanyana le litoeba li ka baka tšenyo ho moetsi oa heke, e sa koaheloang ke tiisetso.

UL KHOKO LIKHETHI

1. CLASS I - Residential Vehicular Gate Operator - Mokhanni oa heke ea likoloi (kapa sistimi) e reretsoeng ho sebelisoa likaracheng kapa libakeng tsa ho paka tse amanang le bolulo ba malapa a le mong ho isa ho a mane a le mong.
2. CLASS ll - Khoebo / Kakaretso. Access Vehicular Gate Operator -Mopalami oa heke ea likoloi (kapa sistimi) e reretsoeng ho sebelisoa sebakeng sa khoebo kapa moahong joalo ka ntlo ea malapa a mangata (liyuniti tse hlano kapa ho feta), hotele, likarache, lebenkele la mabenkele, kapa meaho e meng e fihlellehang kapa ho sebeletsa setjhaba ka kakaretso.
3. CLASS 111 – Industrial / Limited Access Vehicular Gate Operator -Mopalami oa heke ea likoloi (kapa sistimi) e reretsoeng ho sebelisoa sebakeng sa indasteri kapa moaho joalo ka feme kapa sebaka sa boema-kepe kapa sebaka se seng se sa fihlelleheng kapa se reretsoeng ho sebeletsa sechaba ka kakaretso.
4. CLASS IV - Restricted Vehicular Gate Operator - Mokhanni oa heke ea koloi (kapa tsamaiso) e reretsoeng ho sebelisoa sebakeng se sirelelitsoeng sa indasteri kapa mohahong o kang sebaka sa tšireletso ea boema-fofane kapa libaka tse ling tse thibetsoeng tse sa sebeletseng sechaba ka kakaretso, moo ho kena ka ntle ho tumello ho thibetsoeng. ka tlhokomelo ea basebetsi ba tšireletso.

RETS'ELISITSOE KHOKOLO EA MOTLATSI
Potoloho ea motlakase ea 3-wire, 115VAC e nang le 15 amp Sekhechana sa potoloho se ikemetseng (se inehetseng) bakeng sa opereishene e le 'ngoe le 20 amp sekhetho se ikemetseng (se inehetseng) bakeng sa litsamaiso tsa mantlha tsa I secondary. Phallo e tlasetagLithapo tsa taolo li tlameha ho tsamaisoa ka kotopo e arohaneng ho ea ho opareitara.

HLOKOMELA: KA NAKO TSOHLE SHEBA LE HO LATELA MEHAHO EOHLE EA LEHAE LE LIKHOUTU TSA MOHLASE PELE HO KENYA. HO SEBEDISWA HO SEBEDISWA HO HLOKAHALA KE LIKHOUTU TSA LEHAE. TS'ELISITSOE

OPERATOR E BOHLOKOA BAKENG SA TŠEBELETSO EA Y LE TSAMAISO E NEPAHETSENG.

RETS'ELISITSOE LEKHOARA

MOHLALA VOLTS		KE RUN 12GA (AC)		Ke 10GA	Ke 8GA	Ke 6GA
DC3000	115	3.5A	ho fihlela ho 300′	301-400′	401-600′	601-1000′
DC3100	115	5,4A	ho fihlela ho 150′	151-250′	251-400′	401-700′
DC3030	115	5.4A	ho fihlela ho 150′	151-250′	251-400′	401-7001

I! TLHOKOMELO Ke!! Linomoro tse emetsoeng chateng ena ke litlhahiso. Kamehla. buisana le likhoutu tsa motlakase tsa lehae pele u khetha gauge ea terata eo u ka e sebelisang.

LITLHAKISO TSA HO KENYA ATION - PAD YA KONKERETE

TLHOKOMELO
KA NAKO TSOHLE SHEBA LE HO LATELA MEHAHO EOHLE EA LEHAE LE LIKHOUTU TSA MOHLASE PELE HO KENYA.

KAHOO KAKONKERE PATE
Litekanyo tse fanoeng bakeng sa pete li ipapisitse le sekiri se behang mobu sa 2000 PSF Lipalo tsena li ka tlameha ho lokisoa ho latela maemo a mobu oa lehae.

1. Theha foromo bakeng sa ho kenya pate ho latela litekanyo tse bontšitsoeng ho Setšoantšo sa 1, 2 & 3.
2. Fumana sebaka sa ho roala ho ea ka litekanyo tse fanoeng papisong.
3. Hlakola ntlha e ka holimo ea foromo.
4. Beha mekoallo e matlafatsang le mesh ea terata.
5. Kopanya konkreite, tšela motsoako ka foromo. Boemo le ho qeta bokaholimo ka mor'a ho tšela ho phethehile.
6. Lumella pad hore e phekole lihora tse 48, 'me u tlose liforomo.

MOHLALA	A	B	C	D	E	F
DC R3000s	26″	20″	14″	13 1/2 ″	6″	21/2″
DC R3030	26”	20″	13″	13 112″	6”	21/2″

LIEKETSENG MAOTO

LEETO KHOTI TS'OANELO

TLHOKOMELISO EA TŠEBELETSO LE TOQUE LTD TENSE

LEBAKA LA OPERATOR LE BELELEMO BA MATSOHO

TLHOKOMELO SEBELISA HORE HA HO NA LINTLHA TSA PINCH TSE BOPANG HA MATSOHO A LE MAEMO A BOLOKE KA HO PHETHAHETSENG.

SEBELISA BOLELELE BA LEFATE LE LEBAKA LEKONG LE KHATE LE PIVOT HO FETOLA MATSOHO HO BA LE BOLELELE BO NEPAHETSENG PELE O KA A CHESETSA.

COMPACT & Custom INSTALLATION

1. Fumana tepi tekanyo.
2. Kwala heke ka botlalo.
3. Lekanya sebaka ho tloha setsing sa pivot ho ea boutung ea borakete ea heke. Tekanyo ena re tla e bitsa 'X'.
4. Bula 'me u sireletse heke.
5. Koba tekanyo ea teipi (sheba setšoantšo sa 11) ho theha ntlha ea pivot.
6. Beha qetellong ea tekanyo ea tepi (O") holim'a boutu ea bracket ea heke.
7. Beha tekanyo ea 'X' (ho tloha mohatong oa 3) ea tekanyo ea tepi sebakeng sa pivot.
8. Tsamaisa ntlha ea pivot ea tekanyo ea tepi ho fihlela e ka ba lisenthimithara tse 3 ho tloha ho thibela (lebota).
9. 'H' ke bolelele ba letsoho le lekgutshwane.
10. 'J' ke bolelele ba letsoho le lelelele.

LOOP SEBAKA LE HO KENYA

TLHOKOMELO LOOP SENSORS LI KA SE SEBEDISETSOE HO FIHLELA LIHLOKO TSA UL326. PHOTO EYES, EDGES KAPA TSE LING TSA HO FIHLELA LIHLOKO TSA UL326.

• LIKETSAHALO TSE KHUTLANG: Tšoara heke e butsoe kapa u khutlisetse heke e koalang morao haeba koloi e bonoa.
• PHANTOM LOOP: E behiloe ka tlas'a tsela e tsukutloang ea heke e sothoang. Loop ena e tla hlahloba pele heke e koaloa ho bona hore na koloi e ka har'a tsela e tsukutloang, haeba koloi e le ka har'a tsela e tsukutloang heke e ke ke ea sisinyeha.
• KAHARE LOOP: E behiloe ka ntle ho tselana ea heke. E emisa keiti hore e se bulehe ho fihlela e hlakotsoe.
• TSOA LOOP: E bula ebe e bula heke.

MEKHOA E MABAKA A AROHANANG - PRIMARY & SECONDARY

• Hokela thapo e 3, e sirelelitsoeng (ha e fanoe), lipakeng tsa 'SEC XCOM' letlapeng la logic unit unit ea mantlha le 'XCOM' botong ea bakhanni ba AC yuniti ea bobeli.
• Lithapo tsa mantlha / tsa bobeli li lokela ho tsamaisoa ka kotopo e arohaneng le matla.

* BOHLOKOA *
Ha o hokela lithapo tsa mantlha/tsa bobeli, li-operators ka bobeli li tlameha ho tingoa. Hang ha lithapo li hoketsoe, motlakase o ka sebelisoa hape.

MEFUTA EA HO MERA LE TŠIRELETSO E BOLELA

TLHOKOMELO LIBAKA TSOHLE TSA HO FIHLELA HO SIRELETSOA BV SESEBETSI SA TŠEBELETSO SE HLOKOMANG.

• Mokhanni e mong le e mong oa swing gate o hloka bonyane ba:
  1. sesebediswa sa tshireletso sa entrapment ka tsela e bulang, le
  2. lisebelisoa tsa ts'ireletso tse kenang tseleng e koalang.
• E 'ngoe ka lehlakoreng le leng le le leng e koahetsoe ke tsamaiso ea tlhaho ea ERO (Mofuta oa A).
  Ka hona, bonyane leihlo le le leng le le leng la foto, sensor ea bohale kapa e lekanang le eona e tlameha ho eketsoa, ​​​​ka sehlomathi, ka tsela e koalang.
• Kaha ts'ebetso e 'ngoe le e' ngoe e fapane, ho ea ho setsebi se tšoanelehang, se koetlisitsoeng ho etsa bonnete ba hore libaka TSOHLE tse koaletsoeng li sirelelitsoe ke sesebelisoa sa ts'ireletso ea entrapment.
• Hape ke ho setsebi se tšoanelehang, se koetlisitsoeng ho fumana hore na ke lisebelisoa tsa mofuta ofe le hore na ho hlokahala lisebelisoa tse kae.
• Boholo ba lisebelisoa tse 10 tse kenngoeng li ka hokeloa ho opareitara ea hau, ho ipapisitse le sebaka sa leeto le mofuta oa sesebelisoa.

Mefuta ea ts'ireletso ea Horizontal Swing Entrapment A, 81, 82, C kapa D

Hlokomela - Mofuta o tšoanang oa sesebelisoa o ke ke oa sebelisoa bakeng sa mekhoa e 'meli ea ts'ireletso.

Mofuta oa A	Sistimi ea ts'ireletso ea kahare ea tlhaho.
Mofuta oa B1	Sensor e sa amaneng le eona (sensor ea photoelectric kapa e lekanang le eona).
Mofuta oa B2	Sensor ea ho ikopanya (sesebelisoa se haufi kapa se lekanang).
TypeC	Ho fokotsa matla a tlhaho, clutch e feto-fetohang kapa sesebelisoa sa ho imolla khatello.
Mofuta oa D	Sesebediswa se sebetsang se hlokang kgatello e sa kgaotseng ho boloka ho bula kapa ho kwala motsamao wa heke.

Bonyane Bonyane ba Mokhoa oa Tšireletso ea Kena
	Ho bula	Ho koala
Ho Horizontal Swing Heke	1*	2*

*Sistimi ea Inherent ERO (Mofuta oa A) e nkoa e le sesebelisoa se le seng sa ts'ireletso ea ho ts'oara ka lehlakoreng le leng. Ka hona, bonyane sesebelisoa se le seng sa ts'ireletso ea kantle (mofuta oa 1 kapa 81) se hloka ho kengoa moo ho koalang.

EMX - NIR-50-325 - PHOTO EYE WIRING DIAGRAM

TS'IRELETSO SEBAKA

TLHOKOMELO SEBELISA HORE LIBAKA TSOHLE TSA KAROLO LI SIRELETSOE KE LITHOA TSE AMOHELILENG TSA TŠIRELETSO EA LITABA.

LEBAKA LA HO FIHLELA: Libaka pakeng tsa heke e tsamaeang le moeli o hanyetsanang le sebaka kapa bokaholimo moo ho ka khonehang ho fihla ho 6ft ka holimo ho grade. Libaka tse joalo li etsahala haeba nakong efe kapa efe leetong, lekhalo le pakeng tsa heke e tsamaeang le mathōko kapa bokaholimo bo ka tlase ho li-inch tse 16.

E le ho thibela kotsi e tebileng? kotsi ea 'mele kapa lefu ho tsoa hekeng e tsamaeang:
Ho tlameha ho kengoa lisebelisoa tsa ts'ireletso ea liheke ho koahela libaka le libaka tse kotsi nakong ea ho bula le ho koala liheke.

Kaha ts'ebetso e 'ngoe le e' ngoe e (e fapane, haeba ho fihla ho setsebi se tšoanelehang le se koetlisitsoeng ho tseba:

• Libaka tsohle tse ka khonehang le libaka
• Chelete le mofuta oa lisebelisoa tsa ts'ireletso ea entrapment tse hlokahalang.

Lisebelisoa tse lumelitsoeng tse thibelang ho koaleha {10K mokhoa):

• EMX NIR 50-325
• EMX IRB-MON
• EMX IRB-RET
• OMRON – E35-R1 0K4
• MILLER EDGE – PRIME GUARD
• MILLER EDGE – REFLECT-GUARD
• SECO-LARM - "EFORCER" - E931-S50RRGQ
• SECO-LARM - "EFORCER" - E936-S45RRGQ

1. HINGED POST AREA -PINCH POINT
2. TS'ELISO E TSOANG - KAROLO
3. TS'EBETSO PELE
4. MOKHOA OA LENYAKO LE TLAS'A – ENTRAPMENT
5. MORAO PLANEZONE-KERA
6. LEBAKA LA KA HARARE – POLOKO
7. LEBAKA KA NTLE -POLOKO

LOGIC & DC DRIVER BOARD – PEPO YA LED

LEBITSO LEBOTO

• MATLA - Phallo e tlasetage teng.
• PELETSO – Kgoro e a buleha.
• TS'ELISITSOE – Heke e emisitsoe.
• TS'OALANG – Heke ea koaloa.
• PHETLEHILE PHETLA - The Open limit switch e ntse e qala.
• KHAHLILE KHOLUTSOE - Thepa e haufi ea moeli e ntse e hlahisoa.
• 3BTN BULELA - konopo ea "bula" ea li-buttons tse 3 e ntse e hatisoa.
• 3BTN EMA - konopo ea "stop" ea li-button tse 3 e ntse e hatisoa.
• 3BTN TSOELA - konopo ea "koala" ea li-button tse 3 e ntse e hatelloa.
• PR/CO TLHOKOMELA – Temoso ea esale pele / Temoso ea kamehla e ea sebetsa.
• POLOKO – Safety I Reversing sesebelisoa e ntse e qala.
• LIEKETSENG MOTS'OANE - Sesebelisoa sa Firebox se ntse se hlahisoa.
• ETSOA - Ho tsoa sesebelisoa se ntse se hlahisoa.
• PHANTOM - Sesebelisoa sa Phantom se ntse se hlahisoa.
• RELEBOHILE - Sesebelisoa sa seea-le-moea se ntse se hlahisoa
• MAG/SOL - The magnetic I solenoid lock relay e sebetsa.
• TS'ELISO DET – The detector hare e ntse e qala.
• LED 1 - Ha e sebelisoe ka nako ena.
• LED 2 - Ha e sebelisoe ka nako ena.
• LED 3 - Ha e sebelisoe ka nako ena.
• PRI ERO - ERO ho yuniti ea mantlha e ntse e hlahisoa.
• PRI XCOM - Puisano ho yuniti ea mantlha e romella Ke fumana tlhaiso-leseling.
• SEC ERO - ERO ho yuniti ea bobeli e ntse e hlahisoa.
• SEC XCOM – Puisano ho yuniti ya bobedi e romela hore ke fumane letshwao
• SEC FP - Thepa ea pedal ea leoto ho yuniti ea bobeli e ntse e hlahisoa.
• KELELE 1 - Sesebelisoa se shebiloeng se kenngoeng ho Entrapment #1 se ntse se hlahisoa.
• KELELE 2 - Sesebelisoa se shebiloeng se kenngoeng ho Entrapment #2 se ntse se hlahisoa.
• KELELE 3 - Sesebelisoa se shebiloeng se kenngoeng ho Entrapment #3 se ntse se hlahisoa.
• KELELE 4 - Sesebelisoa se shebiloeng se kenngoeng ho Entrapment #4 se ntse se hlahisoa.
• KELELE 5 - Sesebelisoa se shebiloeng se kenngoeng ho Entrapment #5 se ntse se hlahisoa.

DC MOTSAMAI LEBOTO

• AC MATLA - Phallo e tlasetage teng.
• MOTSAMAI 1 - Motor 1 e ea sebetsa.
• MOTSAMAI 2 - Motor 2 e ea sebetsa.
• TS'ELISITSOE – Heke e emisitsoe.
• XCOM – Puisano e nthomella hore ke fumane boitsebiso.
• SEHLOOHO - Kenyelletso ea bohlokoa e ntse e hlahisoa.
• AUX Kenyelletso ea 1 -1 ea tlatsetso.
• LED 1 - Ha e sebelisoe ka nako ena.
• ERO - ERO e ntse e qala.
• LEOTO PEDI – The foot pedal switch a ntse a qala.
• MOLAO 1 - Moeli oa 1 switch ea moeli e ntse e hlahisoa.
• MOLAO 2 - Moeli oa 2 switch ea moeli e ntse e hlahisoa.
• LEBENYA/INIT - Ho qala butle le ho emisa butle ho ntse ho qalisoa.
• TS'ELISO – Betri e ntse e lefisoa.
• BETTI PWR - Boemo ba matla a betri.
• LED 2 - Ha e sebelisoe ka nako ena.

LOGIC BOARD DIP SWACHS & PUSHBUTTONS

DIP SWITCH 'A'

'A'I, 2 & 3 -AUTOMATIC CLOSE TIMER
0 = *TLASE = PHAHAMA

FETOHA 1 2 3 KGORO E BALA NAKO

		0	0		0	KHOLOA
		0	0			0 METSOTSOANA
		0			0	5 METSOTSOANA
		0	1		1	10 METSOTSOANA
		1	0		0	15 METSOTSOANA
		1	0		1	30 METSOTSOANA
					0	45 METSOTSOANA
						60 METSOTSOANA

'A' 4 -PELE TEMOSO EA ALAMO 

TLASE	Ts'ebetso e Tloaelehileng
UP	E etsa hore ho be le puisano pakeng tsa 'CON/PRE TLHOKOMELA' liphetho (tse fumanehang ho polaka ea li-relay) bakeng sa metsotsoana e 3 pele heke e tsamaea Ka tsela efe kapa efe.

'A' 5 -ALAMO EA TLHOKOMELO EA TSOHLE

TLASE	Ts'ebetso e Tloaelehileng
UP	E qala khokahano e koetsoeng lipakeng tsa 'CON/PRE TLHOKOMELA' lihlahisoa (tse fumanehang lihokelong tsa relay plug) neng kapa neng ha enjene e sebetsa.

Haeba ka bobeli 'A' 4 & 'A' 5 li le maemong a holimo, ho tla ba le khokahano e koetsoeng ho con/pre warn outputs bakeng sa metsotsoana e 3 pele le ha enjene e ntse e sebetsa.

'A' 6 -SIIRELETSA HAUFI 

TLASE	Ts'ebetso e Tloaelehileng
UP	Ha motlakase o felile 'me o khutlisetsoa morao, haeba lisebelisoa tsohle li hlakile 'me ho bolokehile, heke e tla koaloa

'A' 7 -PASA E LE NNGWE

TLASE	Ts'ebetso e Tloaelehileng
UP	Ha heke e ntse e buloa, haeba Rev loop Input e ka qala ebe e hlakoloa, heke e tla qala ho koala hang-hang. Haeba rev loop e ka qala hape, pele heke e koaloa ka botlalo, heke e tla ema 'me e lule e phomotse ho fihlela rev loop input e hlakotsoe. Hang ha "rev loop input" e hlakotswe, heke e tla tswella ho kwala hape. Leha e le efe nako haeba lets'oao le bulehileng le amoheloang, heke e tla buleha.

'A' 8 – RADIO CYCLE

TLASE	Kgoro e tla kwala, haeba E le moeding o bulehileng. Ho seng joalo, heke e tla lula e bulehile.
UP	Heke e tla koaloa haeba e le moeling o bulehileng. Heke e tla buleha haeba e le moeling o haufi. Haeba leetong, heke e tla emisa ka taelo ea 1 ebe e khutlisa ka taelo ea bobeli.

DIP SWITCH 'B'

'B' 1 -FULL REVERSE ERD

TLASE	Ts'ebetso e Tloaelehileng. Haeba tšitiso e utloahala, heke thato ema 'me u khutlele morao bakeng sa motsotsoana o le 1.
up	If tšitiso e utloahala: Ho bula - Heke e tla ema ebe e khutlela morao bakeng sa 1 sec. Ho koala - Heke e tla ema ebe e khutlela morao ho fihlela e buloa ka botlalo.

'B' 2 -MAGNETIC/SOLENOID LOCK

TLASE	Magnetic Lock • MAG/SOL relay e khutsufalitsoe ha heke e koetsoe kapa e koaloa.
UP	Solenoid Lock - MAG / SOL relay e khutsufalitsoe ka metsotsoana ea 2 ha heke e qala ho bula.

'B' 3 thru 8 – HA E SEBELISE NAKO ENA

DIP SWITCH 'C'

'C' 1 -3B EMA

TLASE      3-button station- Kenyo ea 'STOP' e ea sebetsa. A
	seboholi se koetsoeng ka tloaelo se tlameha ho ba teng lipakeng tsa 'tloaelehileng' le 'emisa'
UP	Seteishene sa likonopo tse 3- Kenyeletso ea 'STOP' e fetiloe. Ha ho na kamano pakeng tsa 'tloaelehileng' le 'emisa' e hlokahalang.

'C' 2 – MOFUTA D**

TLASE	Sesebelisoa sa Mofuta oa D• ha se sebelisoe ho fihlela maemo a UL325.
UP	Sesebediswa sa Mofuta wa D• Se sebedisetswa ho kopana le maemo a UL325. Sena se tima Likeletso tsohle ntle le li-button tse 3. Letšoao le bolokiloeng lea hlokahala.

Sesebediswa sa Mofuta wa D -Konopo e tobang kapa e lekanang le yona e neng e hloka kgatello e tsitsitseng bakeng sa ho kenya tshebetsong .

Bakeng sa basebelisi ba lifofane ba sebelisang tšireletso ea Mofuta oa D:

1. Litaolo tsa opareitara ea heke li tlameha ho beoa e le hore mosebelisi a be le botlalo view sebakeng sa heke ha heke e tsamaea;
2. Letlapa joalokaha le hlokoa ke UL3.25 - 62.1.6 le tla behoa haufi le litsamaiso.
3. Sesebelisoa se koalang ka boiketsetso (joalo ka sebali sa nako, loop sensor, kapa sesebelisoa se ts'oanang) se ke ke sa sebelisoa, mme
4. Ha ho sesebelisoa se seng se tla hokela.

LIKOPITSO

EP ITHUTE E Behiloe leihlo Konopo ea Tšireletso ea Kena
E kenya ts'ebetsong mokhoa oa ho ithuta oa ts'ireletso ea entrapment. Konopo ena e tlameha ho hatelloa ka mor'a hore lisebelisoa tsa ts'ireletso ea entrapment li hokahane le boto. Nakong ea ts'ebetso ena, li-LED li tla benya. Mochine o tla hlahloba lisebelisoa tse hokahaneng. Hang ha ts'ebetso ena e phethiloe, li-LED li tla khutlela ts'ebetsong e tloaelehileng 'me processor e tla beha leihlo bakeng sa lisebelisoa tse 'ithutiloeng' tse hokahaneng. (Bakeng sa lintlha tse ling, sheba karolo ea Tšireletso ea Kena ea buka ena.)

TSIETSO THUTA

E beha leeto la heke bakeng sa tšobotsi ea ho emisa butle
E sebelisoa nakong ea tlhahiso ea pele. Kamora ho beha li-switches tsa moeli, tobetsa 'me u tšoare konopo ena metsotsoana e 2 • 3. Heke e tla buleha moeling o bulehileng, emisa, ebe o koala moeli o koetsoeng. Sena se theha leeto la heke, leo hape le lumellang boto ea taolo ho tseba moo heke e leng teng ka linako tsohle.

ENTRAPMENT SIRELETSO DIPE SWITCHE & PLUGS

DIP SWITCH 'D & E'

'D'I, 'D'2 & – *MEP
'0' = 'TLASE '1'=HODIMO

FETOHA Dl D2 D3 KETE E BULETSOE NAKO

	O	O	O	HA HO MOSEBETSI OA MAKHOPO
	0	0	1	HA HO MOSEBETSI OA MAKHOPO
	O	1	O	PHOTO LEIHLO KWALO
	o	1	1	MATŠOANTŠI TS'OALENG
	1	0		PHOTO LEIHLO PULONG
	1	0	1	QETELLO PULELE
	1	1	o	PHOTO LEIHLO HO BULOA LE HO KWALWA
	1	1	1	EDGE HO BULOA LE HO KWALWA

'D'4, 'D'5 & 'D'6 - *MEP
0 = IDOWN 1'= PHAHAMA

SHETŠA D4 D5 D6 KITIKO E BALA NAKO

	O	O	O	HA HO MOSEBETSI OA MAKHOPO
	0	0	1	HA HO MOSEBETSI OA MAKHOPO
	O	1	O	PHOTO LEIHLO KWALO
	o	1	1	MATŠOANTŠI TS'OALENG
	1	0	0	PHOTO LEIHLO PULONG
	1	0	1	QETELLO PULELE
	1	1	O	PHOTO LEIHLO HO BULOA LE HO KWALWA
	1	1	1	EDGE HO BULOA LE HO KWALWA

'D'7,'D'8 & 'E'l – *MEP #3
'0' = TLASE '1'= HOLIMO

FETOHA 07 D8 El GATE BALA NAKO

	O	O	O	HA HO MOSEBETSI OA MAKHOPO
	O	O	1	HA HO MOSEBETSI OA MAKHOPO
	O	1	O	PHOTO LEIHLO KWALO
	0	1	1	MATŠOANTŠI TS'OALENG
	1	O	O	PHOTO LEIHLO PULONG
		o	1	QETELLO PULELE
		1	0	PHOTO LEIHLO HO BULOA LE HO KWALWA
	1	1	1	EDGE HO BULOA LE HO KWALWA

* MEP = Ts'ireletso ea ho Kena ka leihlo

'E'2, 'E'3 & 'E'4 – *MEP #4
'0' = IDOWN '1'=UP

FETOHA E2 E3 E4 KIKETE E BULENG NAKO

	o	o	1	HA HO MOSEBETSI OA MAKHOPO
	0	1	O	PHOTO LEIHLO KWALO
	0	1	1	MATŠOANTŠI TS'OALENG
		O	O	PHOTO LEIHLO PULONG
		O	1	QETELLO PULELE
	1	1	O	PHOTO LEIHLO HO BULOA LE HO KWALWA
	1 1 1 EDGE HO PULA LE HO TLOA

'E'5, 'E'6 & 'E'7 – *MEP #5
0 = *TLASE 1= hodimo

FETOHA E5 E6 E7 KIKETE E BULENG NAKO

	0	0	O	HA HO MOSEBETSI OA MAKHOPO
	0	0	1	HA HO MOSEBETSI OA MAKHOPO
	O	1	O	PHOTO LEIHLO KWALO
	o	1	1	MATŠOANTŠI TS'OALENG
	1	0	O	PHOTO LEIHLO PULONG
	1	0	1	QETELLO PULELE
	1	1	O	PHOTO LEIHLO HO BULOA LE HO KWALWA
	1	1	1	EDGE HO BULOA LE HO KWALWA

• BULETSE - E sebelisoa ho sireletsa nakong ea 2 ea potoloho e bulehileng.
• MAKOLOA - E sebelisoa ho sireletsa nakong ea potoloho e haufi.
• SETŠOANTŠO/MATLHOKO - Mofuta oa sesebelisoa se ntseng se hokahanngoa.
  • TLASE = foto-mahlo
  • PHAHAMA= sehokedi se ka thoko

LINTLHA TSA BOTO

• RETS'ELISITSOE LEKOPA • E ne e thiba heke hore e se koale. E tšoara heke e butsoe ha e hlokometsoe. Ena ke khokahano e sa laoloeng. Lisebelisoa tse hlokometsoeng li lokela ho hokeloa ho li-plugs tsa ts'ireletso ea entrapment.
• FIREBOX• E sebedisoang ho bula heke bakeng sa makoloi a tshohanyetso. E hloka lets'oao le hlokometsoeng. E hlakola lisebelisoa tsohle tsa polokeho.
• FEELA SEBELISA LIKOLOI TSA TSHOhanyetso.
• ETSOA • E sebedisetswa ho bula heke le/kapa ho bula heke.
• PHANTOM • E sebelisoa ho tšoara heke e bulehile ha e le moeling o bulehileng. Hang ha heke e qala ho koala sena ha se na phello. E sebetsa ka loop detector kapa photo eye ho koahela sebaka seo heke e fetang ho sona.
• RELEBOHILE – E ne e sebelisoa ho bula, ho emisa le ho koala heke. Taolo e felletseng.
• LIEKETSENG DET - E thibela keiti e tsubehang hore e se ke ea thula tšitiso ha e bula. Ha e qala, heke e tla ema 'me e eme ho fihlela detector e hlakotsoe. Hang ha detector e hlakotsoe, heke e tla tsoela pele ho buleha.
• MAG/SOL - E sebelisoa ka senotlolo sa makenete kapa solenoid. Sheba dip switch '84'. Ena ke tlhahiso ea relay. Ho hlokahala transformer e arohaneng kapa mohloli oa matla ho sebetsa le khokahano ena.
• MAG: Relay e koetsoe ha heke e koala kapa e koetsoe.
• SOL: Relay e koetsoe ka metsotsoana ea 3 ha e qala ho bula, ebe e lokolloa.
• SEC XCOM • Mokhanni oa mohala oa 3, ka ho khetheha o sirelelitsoe, o sebelisetsoang ho buisana pakeng tsa lihlopha tsa mathomo le tsa bobeli.

 

 

DC DRIVER BOARD DIPE SWITCHES & PUSHBUTTONS

DIP SWITCH 'A'

'A' 1 – HO TSAMAEA 1 KA HO TJANA

• TLASE Ho kenya letsoho le letšehali
• Ho kenya letsoho ka ho le letona

NTLHA E VIEW - E eme ka lehlakoreng le le leng la heke eo opareitara e kentsoeng ho eona, e shebile ka ho bula heke. Operator ka ho le Letshehadi = Ho kenngwa ha letsoho le letshehadi Operator ka ho Le letona = Ho kenya letsoho le letona

'A' 2 - TŠIEA E BULENG

• FASE Ha ho tieho ho bula.
• HO PHETHA MOTSOTSOANA OA 1 HO BULOA

'A' 3 & 4 - TŠEA HO TSAMAYA
'0' = FASE 'I'=+UP

	0	0	HA HO tieho HO TLOA
	0	1	1 MOTSOTSOANA OA HO TLOHA
	1	0	2 MOTSOTSOANA OA HO TLOHA
			3 MOTSOTSOANA OA HO TLOHA

FETOHA 3 4 CHEMELO EA tieho

A5 HA E SEBELISE NAKO ENA

TLOHANG MAEMO

DIP SWITCH 'B'

'B' 1 – 'B' 3 – HA E SEBELISE NAKO ENA

'B' 4-SOLA

TLASE	E sebelisoa ho lisebelisoa moo matla a AC a fumanehang le Libetri li sebelisetsoa ho boloka feela
UP	E sebelisoa ho li-unit ha ho se na motlakase oa AC mme ho sebelisoa solar panel.

'B' 5 – DC ELERT

TLASE	TIMA - Yuniti ha e lle ha e le maemong a DC (AC ha e eo)
UP	ON - A Chirp e tla utloahala neng kapa neng ha yuniti e sebetsa ka mokhoa oa DC. (Ho sebetsa ka Betri)

'B' 6 – LBATT ALARM

TLASE	TLOA - Ha yuniti e koetsoe ho isa boemong bo tlase ba betri, ha ho lla e tla utloahala.
UP	ON - Ha yuniti e koetsoe ho isa boemong bo tlase ba betri, yuniti e tla lla.

'B' 7 – HLOLEHANG HO BOLOKEHILE/HO SIRELETSA

TLASE	TIMA - FAIL SAFE - Ha o kena ka har'a betri e tlase, heke e tla buleha 'me e lule e butsoe.
UP	ON - FAIL SECURE - Ha o kena ka har'a betri e tlase, se sireletsehileng se tla koala.

'B' 8 – LEOTO PEDALE

TLASE	TIMA - E sebelisoa ho li-unit tse nang le pedal ea leoto. Ha leoto la maoto le le 'fatše' ha ho na ts'ebetso.
UP	HO BUTSWA – switjha ena e lokela ho ba bakeng sa diyuniti tsohle tse se nang maoto.

LIKOPITSO

• BULETSE – E bula heke. Ha e ts'oaroa, maemong a tšohanyetso, e tla feta lisebelisoa tsa polokeho tse shebiloeng
• EMA – E emisa heke.
• MAKOLOA – E koala heke. Ha e ts'oaroa, maemong a tšohanyetso, e tla feta lisebelisoa tsa polokeho tse shebiloeng.

DC DRIVER BOARD PLUGS & MESEBETSI

• U, V & W - DC MOTOR (Factory Wired) - Lithapo tsa Motor
• -24 XFMR NEGATIVE (Factory Wired) - Ketapele e mpe ea transformer.
• -B BATTERY NEGATIVE (Factory Wired) - Ketapele e mpe ea betri.
• +B BATTERY POSITIVE (Factory Wired) - Moetapele o motle oa betri.
• +24 XFMR POSITIVE (Factory Wired) - Moeta-pele o motle oa transformer.
• LIHLOOHO TSA HALL (Factory Wired) - Khokahano ea terata e 5 ho tloha enjene ho ea ho PCB. E lumella boto ho tseba boemo ba heke.
• X COM A, B & C (Factory Wired) - puisano ea terata e 3 pakeng tsa boto ea logic le boto ea bakhanni.
• SV & 24V DC POWER SUPPLY (Factory wired) - Khokahano ea terata e 3 pakeng tsa boto ea bakhanni le boto ea logic ho matlafatsa boto ea logic.
• LIMIT 1 & LIMIT 2 (Factory Wired) - E nang le mohala ho bula le ho koala moeli o fetotsoe. E thibela heke ho tsamaea ka tsela e nepahetseng.
• ALARM (Factory Wired) - Alamo ea UL e tla lla ka mor'a hore tšitiso e hlahe habeli leetong le le leng la heke.
• LEOTO PEDAL (Factory Wired) - Khokahano ea terata e 2 ho sesebelisoa sa maoto a maoto. 

LEBELO – Lebelo la kgoro.

• 0 = 1' motsotsoana
• 1 = 10″ motsotsoana
• 2 = 8″ motsotsoana
• 3 = 6″ motsotsoana

SLOW STOP - Keiti e tla fokotsa lebelo pele e koaloa ka botlalo.

• 0 – 1 1/2 metsotsoana
• 1 – 2′ butle butle
• 2 – 3′ butle butle
• 3 – 5′ butle butle

MEP

BOHLOKOA: TSEBA TSA SESEBETSI SA MEP SEO O SE SEBELISANG KE UL.326 SE SEBELISA MOKHOA OA 1 OK

1. Litlhoko tsa Slide Gate:
   • Ho koala - Bonyane 1 ea leihlo la foto kapa sensor ea moeli.
   • Ho bula - Bonyane 1 ea leihlo la foto kapa sensor ea moeli.
2. Litlhoko tsa Swing Gate:
   • Ho koala - Bonyane 1 ea leihlo la foto kapa sensor ea moeli.
   • Ho bula - Ha ho hlokahale bonyane.
3. MEP #1
   • Hokela lithapo tse 4 (24V, GND, N.0. & COM) ho polaka ea #1 (e ka lehlakoreng le letona la boto ea logic # 1 thru #5)
   • Beha li-switches tsa dip tse lumellanang
     [MEP 1 = Dip switjha karolo ya 1 (C1, C2, C3) … ]
   • haeba o sireleditse ho bulwa, bulela "OPEN" dip switch.
   • haeba u sireletsa ho koala, bulela konopo ea 'CLOSE' dip.
   • haeba u sebelisa leihlo la foto, tima konopo ea 'PHOTO/EDGE'.
   • haeba u sebelisa sensor ea moeli, bulela konopo ea 'PHOTO/EDGE'.
4. MEP #2 (haeba ho hlokahala)
   • Hokela lithapo tse 4 (24V, GND, NO & COM) ho polaka ea #2 .(e ka lehlakoreng le letona la boto ea logic# 1 thru #5)
   • Beha li-switches tsa dip tse lumellanang
     [MEP 2 = Dip switch karolo 2 (C4, CS, C6) … ]
   • haeba o sireleditse ho bulwa, bulela "OPEN" dip switch.
   • haeba u sireletsa ho koala, bulela konopo ea 'CLOSE' dip.
   • haeba u sebelisa leihlo la foto, tima konopo ea 'PHOTO/EDGE'.
   • haeba u sebelisa kutlo e bohale, bulela konopo ea 'PHOTO/EDGE' .
5. Tsoela pele ka MEP #5 kapa ho fihlela lisebelisoa tsohle tsa MEP li hokahantsoe.
6. Hang ha lisebelisoa tsohle tsa MEP li hokahantsoe, tobetsa 'me u tšoare konopo ea 'EP ITHUTE'.
   • Ha li-LED 'ENTRAP 1' ho ea ho 'ENTRAP 5' li qala ho benya, lokolla konopo.
   • Li-LED tsohle tse 5 li tla tima ka metsotsoana e 3.
   • Li-LED tsohle tse 5 li tla benya ka makhetlo a 3.
   • Li-LED tse tsamaellanang le li-MEP tse neng li hokahane li tla tiea ka metsotsoana e 3. (Etsa bonnete ba hore palo ea li-LED e lumellana le palo ea li-MEP tse hoketsoeng. Haeba linomoro li sa lumellane, hlahloba khokahanyo ea lithapo ebe u pheta mohato oa 6.

Bili ea Lisebelisoa [RAM 3000, RAM 3100, RAM 30-30 DC]

Bongata ba Karolo ka Moetsi

Karolo Che.                                                                                Karolo ea Tlhaloso RAM 3000 DC RAM 3100 DC				RAM 30-30 DC
800-00-85	Chassis, [R3000s]	1	1
800-00-86	Chassis, R30-30 ACDC			1
800-02-07	Sefokotsa Li-Gear – Size 70, Ratio 30:1 [R3000S]	1	1
800-02-08	Sefokotsa Li-Gear – Size 70, Ratio 60:1 [R3030S]			1
800-02-13	Sefokotsa Li-Gear – Size 43, Ratio 30:1 [R3000S]	1	1
800-04-05	Enjene, Dc 3.3 Nm 24 Vdc 1500 Rpm	1	1	1
800-06-00	Sprocket – 50Bs15H X 1 1/8″ [R3030S]			1
800-06-05	Sprocket – 40Bs21 X 1′ [R5000S,R3000ACDC]	1
800-06-07	Sprocket – 40BS21 x 7/8″ [R3000s]	1
800-08-06	Pulley, Cast Iron – Ak104H [R3030S]			1
800-08-45	Pulley, Cast Iron – 5/8′ X 2′ – Ak20 [R300,R3000S,R3030S]			1
800-10-42	Lebanta, - 4L - 390			1
800-12-07	Shaft, Output – 2 1/8″ X 21″ [R3030S]			1
800-20-03	Limit Switch [R3030S]			2
800-20-05	Limit Switch [R50,R30,R300,R302,R3000S]	2	2
800-28-25	Pivot, Ram 3000/3100	1	1
800-28-45	Ho lokolloa ha Pivot Arm			1
800-44-02	Bearing Flange, Ucf211-35 [R3030S]			2
800-46-11	Bushing, Pulley Taper Hx-7/8			1
800-48-03	Cam Limit Switch 3 1/16″ X 4″ : Id 2 3/16″ [R3030S]			2
800-52-12	Chain Drive, 34 Links, Size 50			1
800-52-23	Ketane #40 (23 Lihokelo)	1	1
800-52-24	Chain, Limit Switch #35 (35 Links)	1	1
800-54-49	Limit,Mounting Brack, C- Type	1	1
800-54-52	Limit Switch Bracket [R300, R30-30 Acdc]			1
800-56-11	PCB Box [R302,300,R3000, R30-30, R5700]	1	1	1
800-60-07	Transformer, Dual 115V / 230V Input With 4 Input lead	1	2	2
800-60-10	Fetola, Rocker	2	2	2
800-60-21	Outlet, Single Square [R302]	1	1	1
800-60-35	Bridge Rectifier, Mokhahlelo o le Mong, 100 V, 35 A, Module, 4 Pins,	1	2	2
800-65-01	Boto ea Taolo, Leano [AC/DC]	1	1	1
800-65-04	Boto ea Taolo, Mokhanni [DC]	1	1	1
800-66-12	Lexan, Sekoaelo sa polasetiki [R302, R3000,R5700,R30-30 DC]	1	1	1
800-70-00	DC Battery, 12Vdc – 7.5Ah [Bbs]	2	2	2
800-70-22	Horn Alarm Buzzer 120 Db	1	1	1
800-70-25	Limit Switch Cam Assembly (Hub le Rollpin)	1	1
800-70-35	Knob - 5/16″ - 18 X 1 1/2″			2
800-70-36	Knob - 5/16″ - 18 X 1/2″			1
800-70-98	Letšoao la Temoso Bakeng sa Liheke – Slide/Swing	2	2	2
800-75-04	Kopano ea Monyako oa ho kena	1	1
800-75-14	Sekoahelo Kopano [R30-30]			1
800-75-17	Kopanya Kopano- R3000,R3100	1	1

Karolo ea No. e emetse kopano e LE NNGWE le hoja mefuta e meng e ka ba le tse peli kapa ho feta tsa kopano ka 'ngoe

Likopano [R3000, R3100, R30-30]

RAM 3000 RAM 3100 RAM 30-30

800-75-00 Arm Assembly [300,302,3000s] 1                         1
800-28-00	Arm, Metal Tubing - 1″ X 2″ X 32″ -	1	1
800-28-01	Arm, Metal Tubing - 1″ X 2″ X 42″ -	1	1
800-36-53	Bolt, Hex Head - 5/8″ - 11 X 4	1	1
800-38-78	Nut, Hex Head Nylock - 5/8 ″	1	1
800-40-40	Washer, Flat - Id 5/8″ : Od 1 5/16″	3	3
800-40-27	Washer, Flat - Id 1/2″ : Od 1″ - F436	4	4
800-36-34	Bolt, Hex Head - 1/2″ - 13 X 2″	1	1
800-38-76	Nut, Hex Head Nylock - 1/2 ″	1	1
800-28-30	Plastic End Cap - 1′ X 2′	2	2
800-54-37	Bracket, Heke ea ka Hare ea 2020	1	1
800-54-10	Bracket, Channel ea Kantle	1	1
800-28-30	Plastic End Cap - 1′ X 2′	2	2

		Pheleu 3000	Pheleu 3100	RAM 30-30
800-75-03-L	LEFT-Heavty Duty Arm Assembly [30-30]			1
800-75-03-R	RIGHT-Heavty Duty Arm Assembly [30-30]			1
		Pheleu 3000	Pheleu 3100	RAM 30-30

RAM 3000 RAM 3100 RAM 30-30

800-75-42 Torque Limited Assym [30-30 DC]                                                                                                    2
800-06-10	Sprocket – 50B54 [R3030S]			1
800-26-02	Friction Disc, Torque Limited - Id 4 1/4″: Od 7″ [R3030S]			2
800-26-11	Tension Washer, Torque Limited – Id 3 7/8″ : Od 6″ [R3030S]			1
800-34-70	Beha Screw - 1/2″ - 13 X 1/2″			2
800-36-22	Bolt, Hex Head - 3/8″ - 16 X 1 1/4″			3
800-42-42	Tsela ea Bohlokoa - 1/2 ″ Sq. X 8″			1
800-46-12	Bushing, Metal – ID 3 13/16” – OD 4 3/16” [R3030]			1
800-58-01	Arbor Nut, Torque Limited [R3030S]			1
800-58-12	Arbor Washer, Torque Limited [R3030S]			2
800-58-32	Arbor, Torque Limited [R3030S]			1

RAM 3000 RAM 3100 RAM 30-30

800-75-50 Clamp Kopano ea Phatlalatso [R302,R3000] 1                         1
800-28-35	Release, Lever Handle - 5/8″ - 11 X 1 7/8″ Khoele [R3000S]	1	1
800-38-18	Nut, Hlooho ea Hex - 5/8 ″	1	1
800-40-40	Washer, Flat – Id 5/8′ : Od 1 5/16′	2	2
800-36-55	Bolt, Hex Head - 5/8″ - 11 X 2″	1	1
800-48-80	Clamp – Morao [R3000S]	1	1
800-48-81	Clamp – Ka pele [R3000S]	1	1
800-54-20	Bracket, Clamp Letsoho [R302 R3000S]	1	1
800-36-30	Bolt, Hex Head - 1/2″ - 13 X 1″	2	2
800-40-76	Washer, Split Lock - 1/2″	2	2

RAM 3000 RAM 3100 RAM 30-30

800-76-04 Limit Shaft Assembly [R3000,R3100] 1                         1
800-12-11	Shaft, Limit Switch-1/2 X 4 1/4 [R3000AC/DC]	1	1
800-06-02	Sprocket – 35Bs17 X 1/2″ (2 1/4″ Od – No Keyway) [R5000S,R3000S]	1	1
800-44-04	Ho Beha, ho Tiisitsoe - 1621-2Rs-Nr X 1/2″ W/Snap Ring [R100,R5000S,R3000S]	2	2
800-70-10	Molala, Limit Shaft - 1/2″	2	2
800-48-02	Cam, Limit – Tšepe – 1/2″ [R3000S]	2	2

• RAMSET AUTOMATIC GATE SYSTEMS, INC.
• 9116 DE GARMO AVE
• SUN VALLEY, CA 91352
• 800-771-7055

Litokomane / Lisebelisoa

RAMSET AUTOMATIC GATE SYSTEM RAM3100DC-PE High Traffic Swinging Gate Operators [pdf] Buka ea Taelo RAM3100DC-PE High Traffic Swinging Gate Operators, RAM3100DC-PE, High Traffic Swinging Gate Operators, Traffic Swinging Gate Operators, Swinging Gate Operators, Gate Operators, Operators

Litšupiso

• Bukana ea Mosebelisi