PRO DG SYSTEMS GTA 2X12 2-way Self Powered Line Array System

Lipontšo tsa Tšireletseho

Ka kopo, e bale pele u sebelisa sistimi 'me u e boloke bakeng sa ho e sebelisa hamorao PRO DG SYSTEMS® E U FANA LITEBOHO BAKENG SA U FUMANE TSAMAISO ENA EA MOSEBETSI OA LITŠOANTŠISO O ENTSOE KA FELLO. E HLAHISITSOE LE HO SEBELISA SPAIN, HAHOLO KA LIKAROLO TSA EUROPE MME RE LAKATSA HORE O THABELE KA BOHLOKO LE TSEBETSI EA YONA. Sistimi ena e entsoe, e entsoe le ho ntlafatsoa ke Pro DG Systems® ka tatellano e phethahetseng ea ho sebetsa. Ho boloka boemo bona le ho netefatsa ts'ebetso e nepahetseng, mosebelisi o tlameha ho hlompha matšoao le likeletso tse latelang tsa buka ena.

TŠEBELETSO, TŠEBELETSO LE SEBELISA MOSEBETSI OA TSAMAISO FEELA MME HO HLOKOMELISOA KA HO KHETHANG KE PRO DG SYSTEMS HAEBA:

• Kopano, ho qhekella, ho lokisoa bocha le ho lokisoa kapa ho lokisoa ho etsoa ke Pro DG Systems.
• Ho kenya motlakase ho latela litlhoko tsa IC (ANSI).
• Sistimi e sebelisoa ho latela matšoao a ts'ebeliso.

TLHOKOMELISO:

• Haeba li sireletsang li buloa kapa likarolo tsa chassis li tlosoa, ntle le moo sena se ka etsoang ka letsoho, likarolo tse phelang li ka pepesoa.
• Phetoho efe kapa efe, ho qhekella, ho ntlafatsa kapa tokiso ea sistimi e tlameha ho etsoa feela ka ho khetheha ke Pro DG Systems. PRO DG SYSTEMS HA E NA BOIKARABELO KA TSEBE EFE EA TSAMAISO E BATSOANG KE HO SEBELISA, HO FETOHA, HO FETISISA KAPA TEPISO E TSE LENG E FUMANOE KE MOTHO OA NO-O TSE LENG MOTHO KA TSELA EA PRO DG SYSTEMS.
• Maemo a phahameng a sebuela-hole a ka baka tšenyo ea kutlo, e tlameha ho qoba ho kopana ka kotloloho le libuela-hole tse sebetsang maemong a holimo, ho seng joalo e tlameha ho sebelisa litšireletso tsa kutlo.

KHOkahanyo ea TŠOANELO:

• Sistimi e etselitsoe ts'ebetso e tsoelang pele.
• Sete sa ts'ebetso voltage tlameha ho ts'oana le phepelo ea mantlha ea lehae voltage.
• Li-unit li tlameha ho hokeloa ho mains ka yuniti ea matla e fanoeng kapa thapo ea motlakase.
• Motlakase ha ho mohla o sebelisang loto ea khokahano e senyehileng. Mofuta ofe kapa ofe oa tšenyo o tlameha ho lokisoa.
• Qoba ho hokela phepelo ea motlakase ka har'a mabokose a barekisi hammoho le basebelisi ba bang ba 'maloa ba motlakase.
• Sokete ea plug bakeng sa phepelo ea motlakase e tlameha ho behoa haufi le yuniti 'me e be bonolo ho fihlella.

SEBAKA SA MAEMO:

• Sistimi e lokela ho ema feela sebakeng se hloekileng le se otlolohileng ka ho felletseng.
• Sistimi ha ea lokela ho pepesetsoa mofuta ofe kapa ofe oa vibrate nakong ea ts'ebetso ea eona.
• Qoba ho kopana le metsi kapa libaka tse metsi. Se ke oa beha lintho tse nang le mokelikeli tsamaisong.
• Fumana hore tsamaiso e na le moea o lekaneng 'me u se ke ua thibela kapa ua koahela sebaka leha e le sefe sa moea. Ho sitisa moea ho ka baka ho chesa haholo tsamaisong.
• Qoba ho pepeseha letsatsi le ho ba haufi le mehloli ea mocheso kapa mahlaseli.
• Haeba tsamaiso e e-na le phetoho e feteletseng ea mocheso e ka 'na ea ama ts'ebetso ea eona, pele e qala tsamaiso e tšepa hore e fihlile mocheso oa kamore

ACCESSORIES:

• U se ke ua beha tsamaiso holim'a motheo o sa tsitsang o ka bakang tšenyo ho batho kapa tsamaiso, e sebelise feela ka trolley, rack, tripod kapa setsi se khothalletsoang kapa se fanoeng ke Pro DG Systems ho latela matšoao a ho kenya. Motsoako oa tsamaiso o tlameha ho tsamaisoa ka hloko haholo. Tšebeliso ea matla a feteletseng le fuluru e sa leka-lekaneng e ka baka motsoako oa tsamaiso le ho ema ho ea holimo.
• Lisebelisoa tse ling: se ke oa sebelisa lisebelisoa tse ling tse sa khothaletsoang ke Pro DG Systems. Tšebeliso ea lisebelisoa tse sa khothaletsoang e ka baka likotsi le tšenyo ea sistimi.
• Ho sireletsa tsamaiso nakong ea maemo a leholimo a mabe kapa ha o siuoa o sa hlokomeloe ka nako e telele, plug e kholo e lokela ho khaoloa. Sena se thibela hore sistimi e senyehe ke lehalima le ho phahama ha motlakase phepelong ea mains a AC.

E COMPOTSOE HO MOSEBETSI HO BALA LITAELO TSENA PELE HO SEBELISA TSAMAISO LE HO BOLOKELA HO SEBELISA HAMANE PRO DG SYSTEMS HA E NA BOIKARABELO BA HO SEBELISA MOSEBETSI OA MOSEBETSI KA BASEBETSI BA SE SEBELISANG KA NTLE LE TSEBO E LELENG EA HO SEBELISA MOSEBETSI OA. E BONTŠWE BAKENG SA BAKGWEBI BA DUMELLILENG BA TSHWANETSENG HO BA LE TSEBO E LELENG EA TŠEBELETSO EA TSAMAISO LE HO HLOMPHA MATŠOANTŠO A BONTŠOANG KA TLASE KASE.

LIEKETSENG

Bukana ena e etselitsoe ho thusa basebelisi ba sistimi ea GTA 2X12 LA ho tsoa ho Pro DG Systems, ho sebelisoa ka nepo le ho utloisisa melemo le mefuta e fapaneng ea eona. GTA 2X12 LA ke sistimi e hlophisitsoeng ka botlalo, e entsoe le ho ntlafatsoa Europe (Spain), ka ho khetheha e nang le likarolo tse ntle ka ho fetisisa tsa Europe 100% e hlophisitsoeng-e entsoeng ka maiketsetso Europe (Spain) feela le ka likarolo tsa Europe feela.

TLHALOSO

Sistimi e ikemetseng ea li-line array ea litsela tse 3, e nang le libui tse peli (2) tsa 12″ le libui tse peli (2) tsa 6,5″ sebakeng se kampetsoeng. Karolo ea HF e na le li-drive tsa compression tse tharo (3) tsa 1 ″ tse kopantsoeng le tataiso ea maqhubu. Phetoho ea transducer e hlahisa phallo ea symmetric le e otlolohileng ea 80 ° ntle le lobes ea bobeli holim'a lebelo la maqhubu. E loketse joalo ka PA e ka sehloohong, Frontfill, Sidefill le Downfill liketsahalong tsa kantle kapa ho kenya ka ho sa feleng.

LIEKETSENG TS'OANELO

• Tšebeliso ea Matla: 1900 W RMS (EIA 426A e tloaelehileng) 3800 W lenaneo / 7600 W tlhōrō.
• Boipuso ka lebitso: Tlase 8 Ohm/ Mid 8 Ohm/ Holimo 12 Ohm.
• Karolelano ea Kutlo: 101 dB / 2.83 V / 1 m (karolelano ea 100 - 18000 Hz wideband).
• E balloang Maximum SPL: / 1m 131 dB e tsoelang pele / 134 dB lenaneo / 137 dB tlhoro (yuniti e le 'ngoe) / 134 dB e tsoelang pele / 137 dB lenaneo / 140 dB tlhoro (liyuniti tse' nè).
• Maqhubu a Range: +/ – 3 dB ho tloha ho 50 Hz ho isa ho 19 KHz.
• Nominal Directivity: 80° ea khaso e tšekaletseng, ts'ireletso e otlolohileng ho latela bolelele le sebopeho sa sehlopha.
• Low maqhubu mokhanni: libui tse peli tsa Beyma (12″), 8 Ohm, 600 W, 330,2 mm (3″) tse nang le khoele ea lentsoe la mocheso o phahameng holim'a fiber ea khalase ea khale.
• Ho khaola molekane oa Subwoofer: e tsamaeang le tsamaiso ea subwoofer (IT 218 F-2000, GT 218 B kapa GT 221 B); 25 Hz Butterworth 24 filter - 90 Hz Linkwitz-riley 24 sefa.
• Phokotso ea Maqhubu a Tlase: Ntle le subwoofer: 60 Hz Linkwitz-riley 24 filter - 250 Hz Linkwitz-riley 24 filter. E na le tsamaiso ea subwoofer (IT 218 F-2000, GT 218 B kapa GT 221 B): 90 Hz Linkwitzriley 24 filter - 250 Hz Linkwitz-riley 24 filter
• Mokhanni oa Maqhubu a Mahare: libui tse peli tsa Beyma (6,5 ″), 8 Ohm, 250 W, 165 mm (2″) tse nang le khoele ea lentsoe la mocheso o phahameng holim'a fiber ea khalase ea khale.
• Sekhaotso sa Mid FrequencySefahla sa 250 Hz Linkwitz-riley 24 - 1200 Hz Linkwitz-riley 24 sefa
• Mokhanni oa Maqhubu a Phahameng: bakhanni ba bararo (3) Beyma ba 1″, 8 Ohm, 60 W, 25mm ho tsoa (44.4mm) ka khoele ea lentsoe ea diaphragm
• Ho Khaotsoa ha Maqhubu a Phahameng: 1200 Hz Linkwitz-riley 24 filter - 18000 Linkwitz-riley 24 filter.
• E khothalelitsoe Ampmoqhobi: Pro DG Systems GT 4.0 ka har'a Kabinete.
• Lihokelo: 2 X XLR + 1 NL8MP sehokelo sa sebui. USS-Ethernet + 2 X Powercom
• Lebokose la Acoustic: Mohlala oa CNC o nang le 15 le 18mm o entsoeng ka lehong la birch le koahetsoeng ka ntle
• Qetella: Mosebetsi o tloaelehileng oa pente e ntšo.
• Litekanyo tsa Lebokose: (HxWxD); 370x1070x445mm (14,57″x42, 13″x17,52″).
• Boima ba 'mele: 67,5 Kg (148,81 lbs) boima ba letlooa/ 68,6 Kg (151,24 lbs) boima bo feteletseng ka ho paka.

LIEKETSENG MOARO

HARE GTA 2X12 LA

Ka hare ho GTA 2X12 LA e entsoe ke libui tse peli (2) tsa Beyma tsa 12 ” 600 W RMS. E etselitsoe ka ho khetheha tlas'a liparamente tsa rona bakeng sa ts'ebetso e ntle ea sistimi.

LITŠOANTŠI TSE HLOKO 

• Ho sebetsana le matla a phahameng (600 W RMS).
• 3 ″ (77 mm) khoele ea lentsoe ea koporo e nang le apical ea khale.
• Bolelele bo nepahetseng bakeng sa ho eketsa leeto la ho tsamaea.
• Karabo e atolositsoeng sebakeng sa maqhubu a mahareng.
• E etselitsoe lisebelisoa tse phahameng tsa woofer.

TS'OANELO MOTS'OANE/LIKHATLO 

• Ka lebitso bophara 300 limilimithara 8 in
• E lekantsoe impedance 8
• Bonyane impedance 7,7
• Matla a matla a 600W RMS
• Matla a lenaneo 1200W
• Sensitivity 97 dB 2,83v@ 1m@ 2n
• Maqhubu a maqhubu a 35 - 4.000 Hz
• Recom. kampetsoeng vol. 30/ 100 I 1,06/ 3,53f t3
• Bophara ba khoele ea lentsoe 77 mm 3 in
• Boima ba kopano ea Magnetic 4,9 kg 10,8 lb
• Bl factor 15,1 N/A
• Boima ba ho tsamaea 0,059 lik'hilograma
• Bolelele ba khoele ea lentsoe 17,5 mm
• Bophahamo ba lekhalo la moea ke 7mm
• Xdamage (tlhōrō ho ea holimo) 30mm

THIELE-SMALL PARAMETERS*

• Maqhubu a resonant, f5 43 Hz
• DC Voice coil resistance, Re 6,2 n
• Ntlha ea Boleng ba Mechini, Oms 12,43
• Ntho ea Boleng ba Motlakase, Q85 0,45
• Total Quality Factor, Ots 0,44
• Molumo o lekanang oa Moea ho Cms, V 35 94,241
• Ho latela Mechini, Cms 223 lm / N
• Mechanical Resistance, Rms 1,32 kg/s
• Ka katleho, 'lo 0,055 m2
• Sebaka se Atlehang sa Sebaka, Sd 0,055 m2
• Boholo ba Phahamiso, Xmax ** 7,25 limilimithara
• Phallo ea Phallo, V d 300 cm3
• Voice Coil Inductance, Le @ 1 kHz 1,7 mH

E etselitsoe ka ho khetheha tlas'a liparamente tsa rona bakeng sa ts'ebetso e ntle ea sistimi

TS'EBETSO PHAHAMENG

• Ka kakaretso bophara ba 312 mm 12,3 in
• Bolt selikalikoe bophara 294,5 limilimithara 11,6 in

Baffle cutout bophara

• Thaba e ka pele 277,5 mm 10,9 in
• Thaba e ka morao 280mm 11 in
• Botebo ba 138 mm 5,43 in
• Bolumo e tlositsoe ke mokhanni 4,51 0,16 ft3
• Boima ba Net 5,65 kg 12,45 lb

Litekanyetso tsa TS li lekanyetsoa ka mor'a nako ea ho ikoetlisa ho sebelisoa teko ea matla a preconditioning Litekanyo li etsoa ka lebelo. X max e baloa joalo ka; (Lvc-Hag)/ 2 +(Hag/ 3,5), wtiere Lvc, ke lentsoe ccil bolelele le Hag ke moea lekhalo robeli

Ka hare ho GTA 2X12 LA e entsoe ke libui tse peli tsa Beyma tsa 6,5 ​​″, 250 W RMS. E etselitsoe ka ho khetheha tlas'a liparamente tsa rona bakeng sa ts'ebetso e ntle ea sistimi.

LITŠOANTŠI TSE HLOKO 

• 250 W RMS ho sebetsana le matla
• Boikutlo: 93dB@2.83v
• 2 ho khoele ea lentsoe ea Aluminium.
• Lisebelisoa tsa bopaki ba metsi
• E qobelletsoeng ho tsamaisa moea bakeng sa khatello e tlase ea matla.
• Phallo e laoloang e atolositsoeng: Xmax ± 5.5 mm
• Mokhanni oa sebele oa maqhubu a tlaase

LIEKETSENG MOKHOPO 

• Bophara ba lebitso 165 mm. 6.5 ho.
• E lekantsoe impedance 8 ohms
• Bonyane impedance 5.8 ohms
• Matla a matla a 250W RMS
• Matla a lenaneo 500W
• Sensitivity 93 dB 2.83v@ 1m@ 21t
• Maqhubu a maqhubu a 60-9000 Hz
• Recom. kampetsoeng vol. 10 / 40 I 0.35 / 1.4 ft.3
• Bophara ba khoele ea lentsoe 51.7 mm. 2 ho.
• Boima ba kopano ea magnetic 1.6 kg. 3.52 lik'hilograma
• BL factor 10.5N/A
• Boima ba ho falla ke 0.017 kg.
• Bolelele ba khoele ea lentsoe 14 mm
• Bophahamo ba lekhalo la moea 7 mm
• X tšenyo (tlhōrō ho ea holimo) 20 mm

THIELE-SMALL PARAMETERS*

• Maqhubu a resonant, fs 56 Hz
• DC Voice coil resistance, Re 5.3 ohms
• Ntlha ea Boleng ba Mechini, Qms 3.69
• Ntlha ea Boleng ba Motlakase, Qes 0.32
• Kakaretso ea Boemo ba Boleng, Qts 0.29
• Molumo oa Moea o lekanang le oa Cms, Vas 11.91
• Tumellano ea Mechini, Cms 468 μm/ N
• Mechanical Resistance, Rms 1.6 kg/s
• Katleho, TIO (%) 0.65
• Sebaka se Atlehang sa Sebaka, Sd (m2) 0.0135 m2
• Boholo ba Phahamiso, Xmax 5.5 mm
• Molumo oa Phallo, Vd 74.25 cm3
• Voice Coil Inductance, Le@ 1 kH 0.6 mH

E etselitsoe ka ho khetheha li-parameter tsa rona bakeng sa ts'ebetso e ntle ea sistimi

TS'EBETSO PHAHAMENG

• Ka kakaretso bophara ke 162.5 mm. 6.40 ho
• Bolt selikalikoe bophara 121.62 limilimithara. 4.79 ho

Baffle cutout bophara:

• Thaba e ka pele 145.3 mm. 5.72 ho.
• Thaba e ka morao 145.3 mm. 5.72 ho
• Botebo ba 78 mm. 3.0 ho.
• Bolumo e tlositsoe ke mokhanni 0.551 0.02 ft.3
• Boima ba Net 1.9 kg. 4.18 lb.

Litekanyetso tsa T-S li lekanyetsoa ho fetola nako ea boikoetliso ho sebelisoa tlhahlobo ea matla ea preconditioning. X max E baloa joalo ka; (Lvc-Hag)/2 + (Hag/3,5) moo Lvc e leng bolelele ba coil ea lentsoe le Hag ke lekhalo la moea le robeli.

GTA 2X12 LA e boetse e entsoe ke lenaka le le leng le sa khaotseng la directivity le etselitsoeng ho sebetsa le li-driver tse tharo tsa Pro DG Systems. 60 W RMS, e kopantsoe le tataiso ea maqhubu. Litšobotsi tse sa khaotseng tsa tataiso ea mohlala ona li netefatsa bokhoni ba ho koahela bophara ba 80 ° ka bophara le 20 ° ka bophara ho ea holimo, hoo e batlang e le maqhubu leha e le afe ka har'a sebaka sa eona sa ts'ebetso. Ho etsa bonnete ba hore tokoloho ea resonance e hahiloe ka lehong le nang le sephara se ka pele ho etsa hore ho be le flush.

LITŠOANTŠI TSE HLOKO 

• E etselitsoe ho sebelisoa le li-driver tse tharo tsa Pro DG Systems tsa 60 W RMS ho ea waveguide
• E fana ka karabo e tšoanang
• Tšireletso ea 80 ° sefofaneng se tšekaletseng le 20 ° sefofaneng se otlolohileng
• Taolo e nepahetseng ea tataiso sehlopheng sa lipasa
• Kaho ea mapolanka e nang le bokapele bo bataletseng ho thusa ho holisa

LIEKETSENG MOKHOPO

• Beamwidth e Tshekaletseng 80 (+222, -462) (-6 dB, 1.2 – 16 kHz)
• Beamwidth e emeng 20 ( +272 I -152) (-6 dB, 2 – 16 kHz)
• Ntlha ea Directivity (Q} 60 (karolelano ea 1.2 – 16 kHz)
• Lenane la Directivity (DI} 15.5 dB (+7 dB, -8.1 dB)
• Maqhubu a khaotsoeng ke 800 Hz
• Litekanyo (WxHxD} 170x343x50 (65) limilimithara. 6.69×13.5×1 .97(2.56) ka hare.
• Boima ba Net 0.75 kg/ 1.65 lb.
• Kaho Wood.

GTA 2X12 LA e boetse e entsoe ke bakhanni ba bararo ba compression ba Beyma ba 60 W RMS, e kopantsoeng le tataiso ea maqhubu. E etselitsoe ka ho khetheha tlas'a liparamente tsa rona bakeng sa ts'ebetso e ntle ea sistimi. Motsoako oa matla a phahameng a neodymium compression driver a nang le waveguide, o fana ka sebaka se setle ka ho fetisisa bakeng sa ts'ebetso e ntle ea sistimi. Ho rarolla bothata bo boima ba ho fumana khokahano e nepahetseng lipakeng tsa li-transducer tse phahameng tse haufi. Sebakeng sa ho sebelisa lisebelisoa tse theko e boima le tse thata - waveguide e bonolo empa e sebetsa e fetola lesoba le chitja la mokhanni oa khatello hore e be bokaholimo ba khutlonnetsepa, ntle le lesoba le sa lokelang ho fana ka sekhahla se tlase ho leqhubu la maqhubu a acoustic, le fihla ho phethahatsa tlhoko e hlokahalang ea ho kobeha. motsoako o nepahetseng oa acoustic coupling lipakeng tsa mehloli e haufi ho fihlela 18 KHz. Sena se finyelloa, ka bolelele ba bonyane bo ka khonehang bakeng sa ho khopama ho fokolang, empa ntle le ho ba nako e khutšoanyane haholo, e ka bakang litšitiso tse matla tsa maqhubu a phahameng.

LINTLHA TSE HLOKO ( THUTO E LE NNGWE) 

• 4″ x 0.5″ ho tsoa ka khutlonnetsepa
• Neodymium magnetic circuit bakeng sa katleho e phahameng.
• Khokahano e sebetsang ea acoustical ho fihla ho 18 kHz.
• Kutlo ea 'nete ea 105 dB 1 w@ 1 m (karolelano ea 1-7 kHz).
• Nako e atolositsoeng ea maqhubu: 0.7 - 20 kHz.
• 1. 75″ khola ea lentsoe e nang le matla a ho tšoara 60 W RMS.

BATHO BA FREQUENCY & DISTORTION CUVES 

Hlokomela: karabelo ea maqhubu a axis e lekantsoeng ka li-waveguides tse 2 tse kopantsoeng le lenaka la 80° X 5° ka kamoreng ea anechoic, 1 w@ 1 m.

MAHALA A MOEA IMPEDANCE CURVE 

KHASANE TS'ELISO 

Lintlha: hasane e lekantsoeng ka li-waveguides tse peli tse kopantsoeng le lenaka la 80 ° x 5 ° kamoreng ea anechoic, 1w@ 2m.

Litekanyo tsohle tsa li-angles li tsoa ho axis (45 ° e bolela + 45 °).

LIEKETSENG MOKHOPO 

• Bophara ba 'metso 20.5 mm. 0.8 ho.
• E lekantsoe Impedans 8 ohms.
• Bonyane impedance 5.5 ohms. @ 4.5 kHz
• DC Resistance 5.6 ohms.
• Matla a matla a 60 W RMS ka holimo ho 1.5 kHz
• Matla a lenaneo 120 W ka holimo ho 1 .5 kHz
• Sensitivity * 105 dB 1 w@ 1m e kopantsoe le lenaka la 802 x 52
• Maqhubu a maqhubu a 0.7 - 20 kHz
• Crossover e khothalelitsoeng 1500 Hz kapa ho feta (12 dB/oct. min.)
• Bophara ba khoele ea lentsoe 44.4 mm. 1.75 ho.
• Boima ba kopano ea magnetic 0.6 kg. 1 lb.
• Boima ba Flux 1.8 T
• BL factor 8N/A

TS'EBETSO PHAHAMENG

• Ka kakaretso bophara ke 80 mm. 3.15 ho
• Botebo ba 195 mm. 7.68 ho
• Ho phahamisa tse 'nè 6 mm. masoba a bophara
• Boima ba Nete (1 unit) 1.1 kg. 2.42 lik'hilograma
• Boima ba thepa (li-unit tse 2) 2.6 kg. lik'hilograma tse 5.72

KHASANE THAKA

Lintlha: hasane e lekantsoeng ka li-waveguides tse peli tse kopantsoeng le lenaka la 80 ° x 5 ° kamoreng ea anechoic, 1w@ 2m. Litekanyo tsohle tsa li-angles li tsoa ho axis (45 ° e bolela + 45 °).

LIEKETSENG LITŠOANTŠISO

Hlokomela: Kutloelo-bohloko e lekantsoe ka sebaka sa 1 m, holim'a axis, ka 1 w Kenyeletso, ka karolelano ea 1-7 KHz

LITŠOANTŠISO TSA KAHO

• Waveguide: aluminium.
• Diaphragm ea mokhannilintho: polyester.
• Koele ea lentsoe la mokhanni: terata ea ribone ea aluminium ea edgewound.
• Mokhanni lentsoe coil ea pele: kapton.
• Mokhanni oa makenetematšoao: neodymium.

GTA 2X12 LA AMPTS'ELISO

GT 4.0 ke digital ampLifier module ea moloko oa ho qetela oa sehlopha sa D se nang le likanale tse 3: mocha o le mong (1) oa 2500 W / 4 Ohm bakeng sa mocha o tlaase + o le mong (1) oa 900 W / 4 Ohm bakeng sa mocha oa bohareng + o le mong (1) oa 900 W / 4 Ohm bakeng sa holimo. . E kenyelletsa processor ea dijithale e nang le input le output ea XLR+ sehokelo sa USB le Ethernet. E khona ho amplify le yuniti e 'ngoe ea GT 2X12 LA e sa sebetseng ka mokhoa oa makhoba. E fana ka mefuta-futa e mengata kaha e lumella ho phethahala ha litlhophiso tse fapaneng lipakeng tsa litsamaiso, ho latela mofuta oa tlhokahalo kapa ketsahalo.

LIEKETSENG MOKHOPO 

• Lintlha tsa Matla: (RMS@ 1% THO@ 230Vac)
• Channel 1: 4 n 25oo W 8 12000 w
• Channel 2: 4 n 900 W 8 1600 w
• Channel 3: 4 900 W * 8 600 w
• Sephetho sa Potoloho: UMACTM Sehlopha sa D - sehlopha se felletseng se nang le modulator ea PWM e nang le khopamiso e tlase haholo
• Khumo Voltage: Channel 1 ho letoto la GT: 160 Vp / 320 Vpp e sa laolloa. Liteishene tse ling kaofela: 80 Vp / 160 Vpp e laoletsoe
• AmpLifier Fumana: Channel 1 ho letoto la GT: 32 dB Likanale tse ling kaofela: 26 dB
• Signal To Noise-Ratio: 120 dB (A-weighted, 20 Hz - 20 kHz, 8 0 mojaro)
• THO + N (e tloaelehileng): 0,05 % (20 Hz - 20 kHz, 8 0 mojaro, 3 dB ka tlase ho matla a lekantsoeng)
• Karabelo ea Khafetsa: 20 Hz - 20 kHz ± 0, 15 dB (moroalo o 8 0, 1 dB ka tlase ho matla a lekantsoeng)
• DampNtlha: 900 (moroalo o 8 0, 1 kHz le ka tlase)
• Ts'ireletso ea Ts'ireletso: Sekhahla sa ho kenya, tšireletso ea potoloho e khuts'oane, ts'ireletso ea DC ea tlhahiso, tlasa & over voltage tshireletso, bohlale mains fuse tshireletso, matla stage ts'ireletso e feteletseng, ts'ireletso ea mocheso oa li-transformer le li-sink tsa mocheso
• Lintlha tse baloang bakeng sa DSP / Network: Sireletsa/ Thibela (semumu), mocheso oa Heatsink, Clip (bakeng sa mocha ka mong), Output voltage (bakeng sa mocha ka mong), Output current (bakeng sa mocha ka mong), SMPS Limit (sethibelo sa phepelo ea motlakase)
• Phepelo ea motlakase: URECTM universal & regulated switch mode power supply
• Tshebetso Voltage: Universal Mains, 85-268V (dual voltage khetho ea auto) Laola Likhetho tsa Mokhoa oa ho Robala (feela +7V e phela), Thibela lintho tse hlahisoang (bulisa) Phokotso ea mocheso ON/ OFF Aux. Matla bakeng sa DSP ± 15 V (150 mA), + 7 V (1 A, e fanoa ka motlakase o eme)
• Litekanyo (HxWxD): X 265 x 483 x 105 mm / 10.43 x 19.02 x 4,13 ho
• Boima ba 'meleBoima: 6,9 lik'hilograma / 15,21 lbs

TS'ELISO SEBELISA

Rigging Hardware foreimi ea GTA 2X12 LA e entsoeng ke: e le 'ngoe (1) foreimi ea tšepe e bobebe+ pinlock e mene (4) + e le 'ngoe (1) e tla tšehetsa boima ba boima ba lithane tse peli (2). E ka phahamisa kakaretso ea 16 GTA 2X12 LA

Flight Hardware e kenyellelitsoe ka har'a khabinete e nang le limaraka tse fapaneng tse fapaneng.

Mokhoa oa Stack bakeng sa ho fana ka maemo a mangata le ho fana ka tšireletso.

BOHLOKOA: tšebeliso e mpe ea foreime le likaroloana e ka ba sepheo sa ho petsoha ho ka senyang polokeho ea sehlopha. Ho sebelisa foreimi e senyehileng le likaroloana ho ka baka mathata a tebileng.

PREDICTION SOFTWARE LE THULATSO TSA THUTO

Ho Pro OG Systems rea tseba hore ho etsa libui tsa boleng bo holimo ke karolo ea bohlokoa ea mosebetsi oa rona. Joale, ho na le karolo e 'ngoe eo hape e leng ea bohlokoa mosebetsing oa rona o fanang ka tiisetso ea ho sebelisa libui hantle. Lisebelisoa tse ntle li etsa phapang molemong oa tšebeliso e nepahetseng ea sistimi. Ka GTA 2X12 LA Prediction Software Ease Focus re ka rala litlhophiso tse fapaneng lipakeng tsa litsamaiso le ho etsisa boitšoaro ba tsona libakeng le maemo a fapaneng, joalo ka ho shebella sekoaelo, khafetsa, SPL le boits'oaro bo akaretsang ba litsamaiso ka tsela e bonolo le e bonolo. Ho bonolo ho sebetsana le eona mme re fana ka lithuto tsa koetliso bakeng sa bareki ba Pro OG Systems. Ho fumana lintlha tse ling, ikopanye le litšebeletso tsa rona tsa tekheniki ho: info@prodgsystems.com

LIEKETSENG

Pro DG Systems e fa bareki ba bona mefuta eohle ea lisebelisoa bakeng sa litsamaiso tsa bona. GTA 2X12 LA e na le F/Case bakeng sa lipalangoang kapa Dolly Board le Covers bakeng sa lipalangoang, hammoho le cabling e felletseng bakeng sa sistimi e seng e loketse ho sebelisoa.

Sefofane Case ho tsamaisa 4 diyuniti tsa GTA 2X12 LA Ka ho feletseng dimensioned bakeng sa pakete hermetic le loketse bakeng sa tsela.

Dolly board le likoahelo bakeng sa lipalangoang likarolo tse 'ne tsa GTA 2X12 LA E entsoe ka mokhoa o phethahetseng ho tsamaisa ka mofuta ofe kapa ofe oa teraka.

Kakaretso e felletseng ea sistimi e teng ebile e loketse ho sebetsa.

PRO DG LITSAMAISO MACHABA
PI Santa Barbara. C/ Aceituneros n°7 41580 Casariche (Sevilla). Spain

• Mohala: + 34 954 011 095
• E-mail: info@prodgsystems.com export@prodgsystems.com
• Web: www.prodgsystems.com

Litokomane / Lisebelisoa

PRO DG SYSTEMS GTA 2X12 2-way Self Powered Line Array System [pdf] Bukana ea Mosebelisi GTA 2X12, GTA 2X12 2-way Self Powered Line Array System, 2-way Self Powered Line Array System, Self Powered Line Array System, Powered Line Array System, Line Array System, Array System, System

Litšupiso

• Bukana ea Mosebelisi