Prestel KB-IP9N IP le Serial Joystick Remote Control Keyboard
Prestel KB-IP9N IP&Serial Joystick Remote Control Keyboard
Prestel KB-IP9N ke keyboard e sebetsang ka mokhoa o fapaneng e etselitsoeng ho laola lik'hamera le lisebelisoa tse ling. E ts'ehetsa likhokahano tse fapaneng tsa taolo joalo ka segokanyimmediamentsi sa marang-rang, RS232 interface, RS422 interface, le RS485 interface. Khiboto e lumellana le liprothokholo tse ngata tsa taolo tse kenyelletsang VISCA Serial, Pelco-P, Pelco-D, VISCA over IP, VISCA TCP, VISCA UDP, ONVIF, le NDI (ho ikhethela).
Tataiso ea Tšireletso
Litemoso
- Pele o sebelisa sehlahisoa, ka kopo bala litaelo tsa polokeho ka hloko 'me u sebetse ka thata ho latela bukana ea litaelo.
- Sebelisa adaptara ea motlakase e fanoeng e nang le matla a tloaelehileng a phepelo ea motlakasetage ea DC 12V mme e lekantsoe ea hajoale ea 1A
- Netefatsa hore thapo ea motlakase le thapo ea taolo li behiloe sebakeng se sireletsehileng ho thibela tšenyo.
- Sebetsa sehlahisoa ka har'a mocheso o khothalletsoang oa -10 ~ 50 ° C le mefuta ea mongobo ea 80%.
- Qoba ho qhalla lintho tse metsi, haholo-holo tse senyang, sehlahisoa.
- Qoba ho sebelisa khatello e matla, ho thothomela ho matla, kapa ho qoelisoa nakong ea lipalangoang, polokelo, le ho kenya.
- U se ke ua qhaqholla sehlahisoa ntle le tumello. Tlohela litokiso ho basebetsi ba tšoanelehang ba tlhokomelo.
Hlokomela
- Ka kopo, sheba sehlahisoa sa 'nete ho fumana lintlha tse nepahetseng. Bukana ea mosebelisi ke ea litšupiso feela.
- Ikopanye le Lefapha la rona la Tshebeletso ya Bareki bakeng sa ditsamaiso tsa moraorao le ditokomane tse ding.
- Haeba ho na le lipelaelo kapa likhang bukeng ea mosebelisi, tlhaloso ea ho qetela ea k'hamphani e tla ba teng.
Sheba Pele U Sebelisa
The Wiring
Etsa bonnete ba hore likhokahano tse nepahetseng tsa lithapo li etsoa ho latela litaelo tse fanoeng.
Switjha ya ho daela tlase
Swipe e tlase ea ho daela keyboard e u lumella ho khetha mokhoa
| Mokhoa | EA-1 | EA-2 | Tlhaloso |
|---|---|---|---|
| 1 | * | TLOA | Mokhoa oa ho ntlafatsa oa ARM |
| 2 | * | ON | Mokhoa o Tloaelehileng oa ho sebetsa |
| EA-1 | Reserved | Ha ho mosebetsi o hlalositsoeng |
Likarolo tse sebetsang
- E tšehetsa sebopeho sa marang-rang, RS232 interface, RS422 interface, le RS485 interface bakeng sa taolo.
- E ts'ehetsa liprothokholo tse fapaneng tsa taolo ho kenyelletsa VISCA Serial, Pelco-P, Pelco-D, VISCA holim'a IP, VISCA TCP, VISCA UDP, ONVIF, le NDI (ho ikhethela).
- E na le likonopo tse supileng tsa li-shortcut tsa khamera bakeng sa ho chencha kapele le ha bonolo lipakeng tsa lik'hamera tse ngata.
- E lumella ho beha liprothokholo tse fapaneng ho laola lik'hamera tse ngata tse nang le liprothokholo tse fapaneng.
Ka kopo, sheba buka e felletseng ea mosebelisi bakeng sa litaelo tse felletseng mabapi le ho sebelisa keyboard ea Prestel KB-IP9N ea remote control.
Tataiso ea Tšireletso
Litemoso
- Pele o sebelisa sehlahisoa, ka kopo bala taelo ena ea polokeho ka hloko, sebetsa ka thata ho latela bukana ea litaelo, 'me u boloke bukana ena hantle bakeng sa tšebeliso ea nako e tlang.
- Phepelo e tloaelehileng ea motlakase voltage ke DC 12V mme ea hajoale e lekantsoeng ke 1A. E kgothaletswa ho sebelisa le adaptara ea matla e tlang le sehlahisoa.
- Ka kopo, beha thapo ea motlakase le thapo ea taolo sebakeng seo li ke keng tsa ba trampe etella pele, 'me u sireletse thapo, haholo-holo karolo ea khokahano e tlameha ho tiea.
- Ka kopo sebelisa sehlahisoa sena ka har'a mocheso o lumelletsoeng le mongobo. Thempereichara ea ho sebetsa: -10 ℃ ~ 50 ℃, mongobo ≤ 80%.
- Se ke oa tšolla maro, haholo maro a senyang, holim'a sehlahisoa sena ho thibela kotsi.
- Ka kopo u se ke ua beha khatello e boima, ho sisinyeha ka mabifi le ho qoelisoa nakong ea lipalangoang, polokelo le ho kenya ho qoba ho senya sehlahisoa.
- Ka kopo u se ke ua qhaqha sehlahisoa sena ntle le tumello, ha ho na likarolo tse ka hare ho mochine tse ka lokisoang ke mosebedisi, ka kopo tlohela mosebetsi ho basebetsi ba tšoanelehang ba tlhokomelo.
Polarity ea phepelo ea matla
Hlokomela
- Ka kopo, sheba sehlahisoa sa sebele, bukana ea mosebedisi ke ea boitsebiso feela.
- Ka kopo ikopanye le Lefapha la rona la Tšebeletso ea Bareki bakeng sa mekhoa ea morao-rao le litokomane tse ling.
- Haeba ho na le lipelaelo kapa likhang bukeng ea mosebelisi, tlhaloso ea ho qetela ea k'hamphani e tla ba teng.
Sheba Pele U Sebelisa
Lenane la ho paka
- Ha u bula sephutheloana, ka kopo sheba 'me u netefatse lisebelisoa tsohle tse lokelang ho fanoa.
- Laola keyboard············································· ························ · 1PCS Adapter ea Matla ·················· ·············································· ······ 1PCS Mohala oa Matla ······································ ·····································1PCS RS232
- Cord··········································· ····························· 1PCS Bukana ya Mosebedisi ··············· ·············································· ············· 1PCS Setifikeiti sa Tumellano ································ ······························· 1PCS Tiisetso
- Karete··············································· ···························· 1PCS Quick Guide················ ·············································· ···········1PCS
The Wiring
Switjha ya ho daela tlase
| Taolo ea ho daela tlase | |||
| Mokhoa | EA-1 | EA-2 | Tlhaloso |
| 1 | * | TLOA | Mokhoa oa ho ntlafatsa oa ARM |
| 2 | * | ON | Ho sebetsa ka mokhoa o tloaelehileng
Mokhoa |
| SW-1 e bolokiloe, ha ho mosebetsi o hlalosoang | |||
Likarolo tse sebetsang
- Khokahano ea marang-rang ea tšehetso, RS232 interface, RS422 interface le RS485 bakeng sa taolo.
- E tšehetsa VISCA Serial, Pelco-P, Pelco-D, VISCA holim'a IP, VISCA TCP, VISCA UDP, ONVIF, le li-protocol tsa NDI bakeng sa taolo. (NDI protocol ke ea boikhethelo.)
- Ka li-buttons tse supileng tsa ho laola li-shortcuts tsa khamera, ho ntlafatsa lebelo la ho fetola likhamera tse ngata, tse loketseng le tse potlakileng.
- Ts'ehetso ea ho beha liprothokholo tse fapaneng ho laola lik'hamera tse ngata tse nang le liprothokholo tse fapaneng.
- Ts'ehetsa keyboard e le 'ngoe ho laola lik'hamera tse ngata, hape e ts'ehetsa li-keyboards tse ngata ho laola khamera ka sebopeho sa marang-rang.
- E ikamahanya le "joystick" ea mahlakore a mane ho nolofalletsa taolo ea kh'amera ea video ea PTZ ho sisinyeha hantle le ka mokhoa o bonolo.
- Ts'ehetso ea ho beha maemo a fapaneng a tumello ea ts'ebetso ka menu ea OSD.
- Likonopo tsa li-buttons tsa backlight, li nolofalletsa basebelisi ho khetha khanya ea othomathike ka khanya e tlase kapa tikolohong e lefifi.
- Sete ea tšehetso, letsetsa le ho hlakola li-presets.
- E ts'ehetsa lebelo la khamera ea PT le tokiso ea lebelo la zoom, ha e ntse e ts'ehetsa lebelo la PT le maemo a behiloeng esale pele le tokiso ea lebelo la zoom.
- Tšehetsa mosebetsi oa ketane ea daisy. (Boholo ba lik'hamera tse 7 lia fumaneha)
- Ts'ehetsa tlhophiso ea menyetla ea khamera ea OSD.
- E tšehetsa POE e tloaelehileng (Power Over Ethe).
- Ts'ehetso ea 10M, 100M marang-rang a feto-fetohang a RJ45.
- Ts'ehetsa segokanyimmediamentsi sa menu ea Sechaena le Senyesemane.
Litlhaloso tsa Tekheniki
| Mekhahlelo | Lipontšo |
| Control Interface | RJ45,RS232,RS422,RS485 |
| RJ45 | Ethernet port, POE (IEEE802.3af) |
| RS232 | Mohokahanyi oa banna oa DB9 |
| RS422 | 3.81 terminal ea sebaka, T＋,T－,R＋,R－ |
| RS485 | 3.81 terminal ea sebaka, T＋, T－ |
| Melaoana ea Ts'ehetso | VISCA Serial, Pelco-P, Pelco-D, VISCA over IP, VISCA TCP, VISCA UDP, ONVIF, NDI(boikhethelo) |
| Ntlafatsa Sebopeho | Mofuta oa C |
| Hlahisa skrine | 3.12 ″ skrine ea OLED, leseli le leputsoa, lipikselse tse 256x64 |
| Ho sebetsa matla | 12V- 1A |
| Ho sebetsa Mocheso | -10 ℃ ~ 50 ℃ |
| Ho sebetsa Mongobo | ≤80% |
| Mocheso oa polokelo | -20 ℃ ~ 60 ℃ |
| Mongobo oa polokelo | ≤90% |
| Boholo | 320.5mm×156.5mm×118mm |
| Boima ba 'mele | 1.05kg |
Boholo ba Sehlahisoa
Tlhaloso ea Sehokelo
- Sekoti sa notlela
- Ntlafatsa sebopeho
- RS232 sebopeho
- RS485 sebopeho
- Khokahano ea marang-rang
- Sehokelo sa matla
- Leseli la sesupo
- Koto ea ho fetola
- Konopo
- Joystick
- Hlahisa skrine
- Ho daela switjha
Bontša Litaba tsa Skrine
Mosebetsi oa konopo
Sebaka sa Khetho sa Shortcut
CAM1】~【CAM7】 Khetha khamera e tsamaisanang le eona.
Hlokomela: Aterese ea IP ea khamera e ka fetoloa kapele. Ka mokhoa oa ho laola IP, kenya ka ho toba lenane la ho qetela la linomoro tsa aterese ea IP ea khamera ho keyboard, ebe o tobetsa linotlolo tsa CAM1 ~ CAM7, o ka fetola kapele nomoro ea hona joale ea aterese ea IP ea khamera ho nomoro ea IP e kentsoeng, e le hore u ka ts'ehetsa 1 ~ 254 aterese ea IP ea kh'amera e fetohang kapele.
【0~9】+【CAM1】~【CAM7】 Kenya aterese ea IP ea khamera (linotlolo tse tharo tsa ho qetela), ebe u khetha e 'ngoe ea linotlolo tsa CAM1~CAM7 ho hokahanya ka potlako khamera ena.
Adjustment Knob Area, 3A Setting Area
【AE MODE】 Ho na le lentsoe "AUTO" haufi le konopo ea AE MODE. Ha lebone la "AUTO" le butswe, mokhoa oa ho itlhahisa oa boiketsetso oa qala; ha lebone la "AUTO" le tima, mekhoa e meng e hlahisoang ka letsoho, ts'ebetso ea shutter, bohlokoa ba iris, bohlokoa bo khanyang bo ka khethoa, 'me ka nako ena, likonopo tse tharo tse ka lehlakoreng le letšehali la keyboard li ka fetola shutter, iris, fumana , li-parameter tse khanyang le tse ling.
【WB MODE】 Ho na le lentsoe "AUTO" haufi le konopo ea WB MODE. ha lebone la "AUTO" le khantšitsoe, ke mokhoa oa AUTO le ATW; ha lebone la "AUTO" le timme, buka ea litaelo, ka hare le ka ntle, Sodium lamps, fluorescent lamps e ka khethoa, ebe phaello e khubelu ea khamera le phaello e putsoa e ka fetoloa ka likonopo tse peli tsa pele ka lehlakoreng le letšehali la keyboard.
【TRIGGER】 Ka mokhoa oa Onepush (lebone la "WB PUSH" le butse), "automatic white balance" e qala hang.
【G/F / AF/MF】 Lentsoe “AF” le haufi le senotlolo G/F / AF/MF. Ha lebone la "AF" le butswe, ke mokhoa oa ho tsepamisa maikutlo ka boiketsetso; ha lebone la "AF" le sa bonesoa, ke mokhoa oa ho tsepamisa mohopolo, o ka fetoloang ka konopo ea boraro ka lehlakoreng le letšehali la keyboard.
Tobetsa nako e khuts'oane 【G/F/AF/MF】 Fetolela ho fumana taolo le mokhoa oa ho tsepamisa maikutlo. Ha o le mokgweng wa ho tsepamisa maikutlo, lebone la "FOCUS" le ka hodimo ho konopo ya boraro ka ho le letshehadi le tla kgantsha.
Tobetsa ka nako e telele【G/F/AF/MF】 Fetoha lipakeng tsa auto focus mode le manual focus mode.【PUSH FOCUS】 E etsa hore autofocus e be hang.
Sebaka sa Konopo ea Numere
- 【0~9】+【SET】 Hlophisa lintho tseo u li behileng esale pele.
- 【0~9】+ Tobetsa hakhutšoane【BITSA/HLAKISA】 Letsa li-presets.
- 【0~9】+ Tobetsa ka nako e telele【BITSA/PHETHA】 Hlakola Litlhophiso.
Hlokomela: Ho fihla ho li-presets tsa 128 li ka hlophisoa le ho hopoloa.
Liparamente le Sebaka sa Tokiso ea Lebelo
- 【－ SHARPNESS＋/－PRESET SPEED＋】 Fetola bohale. / Fetola lebelo leo u le behileng esale pele.【－WDR＋/－PT SPEED＋】 Fetola WDR. / Fetola lebelo la khamera ea PT.
- 【－CONTRAST＋/－Z SPEED＋】 Fetola phapang. / Fetola lebelo la ho atometsa khamera.【－SATURATION＋/－ZOOM＋】 Fetola boemo. / Lokisa katametso ya lense ya khamera.
Hlokomela: Tobetsa konopo ea SHIFT ho chencha lipakeng tsa mokhoa oa ho beha parametha le mokhoa oa ho beha lebelo, 'me ponts'o e tla bontša "S".
- Ha "S" e bonts'oa ponts'o, likonopo tsena tse 4 li ka sebelisoa bakeng sa ho hlophisa paramente.
- Ha ponts'o e sa bontše "S", linotlolo tsena tse 4 li ka sebelisoa ho seta lebelo le ho atametsa.
Libaka tse ling tsa Likonopo
- 【BLC / AT CONTRCL】 switjha ea matšeliso ea lebone la morao-rao, switjha ea ho latela ka bo eona. (Tobetsa konopo ea SHIFT ho fetola.)
- 【SHIFT】 Fetoha lipakeng tsa mokhoa oa ho lokisa parametha le mokhoa oa ho lokisa lebelo.
- 【BATLA / KA MOKHOA】 Batla Aterese ea IP, mokhoa oa ho latela mokhoa oa Auto-tracking ho menu. (Tobetsa konopo ea SHIFT ho fetola.)
- 【HOME/OK】 Khutlela sebakeng sa pele sa khamera.
- 【MATLA/RESET PUSO】 Tobetsa nako e kgutshwane ho laola matla a khamera, tobetsa ka nako e telele ho seta khamera.【CMENU/KMENU】 Tobetsa ka bokgutshwane ho bula lenane la khamera, tobetsa nako e telele ho bula lenane la dikonopo.
Taolo ea Joystick
- 【Hodimo】【Fatshe】【Ka ho le letshehadi】【Ka ho le letona】 Tlosa thapo ho laola khamera ho ya dintlheng tse 4.【Atometsa＋】 Fetolela thapo ya thabo ka nqa ho le letshehadi ho atometsa.
- 【Atometsa－】 Fetolela sesupa-nako sa thabo ka nqane ho oache ho atometsa.
- 【Lock】 Ha u laola khamera, tobetsa konopo ea "lock", khamera e lula e potoloha ka tsela e fetileng ea taolo ho fihlela nako ea ho koala e fetisitsoeng kapa khamera e potoloha ho ea sebakeng sa moeli.
Litaelo tsa Ts'ebetso
- Tobetsa nako e telele CMENU/KMENU ho bula menu ea keyboard; Fetola joystick Holimo le Tlase ho view likhetho tsa menu; Tokelo ea ho kenya khetho e latelang; Ka ho le letšehali ho khutlela khethong e fetileng, tobetsa CMENU/KMENU e ka boela ea khutlela khethong e fetileng; linotlolo tsa linomoro 0 ~ 9 li ka beha liparamente tse tsamaellanang likhethong tse ling.
- Ho menu ea keyboard, o hloka ho beha protocol e lumellanang, aterese e le hore u laole khamera hantle.
Menu dikgetho
|
Tsamaiso tlhophiso |
Puo | Sechaena/Senyesemane |
| Khanya | 1-15 | |
| BackLight | MOSEBETSI OA TSAMAEA | |
| Screen Prt | 10s ~ bo180 | |
| DHCP | TIMA/TEMELA | |
| Locol IP | 192.168.001.180 (E ka hlophisoa) | |
| Mask | 255.255.255.000 | |
| Gateway | 192.168.001.001 | |
| Run Link | TIMA/TEMELA | |
| Seta bocha | CHE/E |
|
Khamera tlhophiso |
Khamera | Keyboard e ka hlophisoa ka liaterese tse 7: CAM1~CAM7 |
| Protocol | VISCA Serial, Pelco-P, Pelco-D, VISCA over IP, VISCA TCP, VISCA UDP, ONVIF, NDI(boikhethelo) | |
| IP Addr / Aterese | Seta aterese ea IP ea khamera kapa aterese ea khamera. | |
| Boema-kepe / Baundrate | Beha boema-kepe kapa sekhahla sa baud.
Linomoro tsa boema-kepe bakeng sa protocol e 'ngoe le e 'ngoe ea IP: ONVIF: 8000, NDI: 5961, VISCA: 52381 |
|
| Username | Litlhophiso tsa lebitso la mosebelisi, kamehla: admin | |
| Password | Ho beha phasewete, kamehla: admin |
| PTZ | Pan Reverse | Leqeleng le le letona la taolo ea keyboard le ka fetoloa. |
| Shebisa | Tsela ea holimo le tlase ea taolo ea keyboard e ka fetoloa. | |
| Seta esale pele PT Spd | Beha lebelo la PT esale pele: 5-24 | |
| Seta esale pele Z Spd | Seta lebelo la Zoom esale pele: 1-7 | |
| Lebelo la Foucs | Beha maikutlo a ho tsepamisa maikutlo: 0-7 | |
| Lock Time | Sehlopha sa nako ea ho koala: 2~20(s) |
| Password tlhophiso | PSD e ncha | Beha phasewete e ncha ho fihlella lenane la keyboard |
| Netefatsa | Netefatsa phasewete e ncha ho fihlella lenane la keyboard | |
| Thusa | Fetola phasewete ho fihlella lenane la keyboard | |
| Phetolelo | Nomoro ea phetolelo ea lenaneo la keyboard le letsatsi la ntlafatso |
Setšoantšo sa wiring
Khokelo ka mokhoa oa netweke
- Khiboto e ho LAN e tšoanang le khamera: Khiboto e hokela ho switjha ka thapo ya netweke, mme khamera e hokela ho switjha ka thapo ya netweke. Ka LAN e tšoanang, beha karolo e tšoanang ea marang-rang, 'me u behe protocol e lumellanang, aterese ea IP le nomoro ea port, u ka laola khamera ka lebokose.
- Keyboard e hokahane le khamera ka kotloloho: Khiboto e hokahane le khamera ka mohala oa marang-rang, beha karolo e tšoanang ea marang-rang, 'me u behe protocol e ts'oanang, aterese ea IP le nomoro ea port, o ka laola khamera ka keyboard.
Khokahano ka mokhoa oa RS232
Khiboto e hokela kh'amera ka thapo ea RS232, beha protocol e lumellanang, aterese le sekhahla sa baud, 'me u ka laola khamera ka keyboard.
- Tatelano ya Mola: U sebelisa khokahanyo ea RS232, pin 1 RXD ea keypad e hokahane le sebopeho sa ho kenya khamera TXD, pin 2 TXD ea keypad e hokahane le khamera RXD le pin 3 ea keypad e hokahane le khamera ea GND. (Hoa khoneha hape ho sebelisa sebopeho se tloaelehileng sa RS232 sa konopo ea taolo ho hokela khamera.
| DB9 Monna (Mofuta oa Pin) | Nomoro ea Pin | 2 | 3 | 5 | 1,4,6 | 7,8 |
| Letshwao Tlhaloso | RXD | TXD | GND | Khokahano ya ka hare | Khokahano ya ka hare |
Khokahano ka mokhoa oa RS422
Khiboto e hokela kh'amera ka thapo ea RS422, beha protocol e lumellanang, aterese le sekhahla sa baud, 'me u ka laola khamera ka keyboard.
- Tatelano ya Mola U sebelisa khokahano ea bese ea RS422, keyboard pin 1 TXD + e hokahana le RXD- ea kh'amera, konopo ea keyboard 2 TXD - e hokahana le RXD + ea kh'amera, konopo ea keyboard 3 RXD + e hokahana le TXD ea kh'amera -, konopo ea keyboard 4 RXD. – e hokela ho TXD+ ea khamera.
Hlokomela: Lik'hamera tse ling ha li tšehetse taolo ea RS422.
Khokahano ka mokhoa oa RS485
Khiboto e hokela kh'amera ka thapo ea RS485, beha protocol e lumellanang, aterese le sekhahla sa baud, 'me u ka laola khamera ka keyboard.
Setšoantšo sa wiring 
- Tatelano ya Mola: U sebelisa khokahano ea bese ea RS485, konopo ea keyboard 1 TXD + e hokahaneng le kh'amera RXD-, konopo ea keyboard 2 TXD- e hokahaneng le kh'amera RXD +.
Cascade ka mokhoa oa RS232, RS422, RS485
Khiboto e hokahanya boema-kepe ba RS232-IN ea kh'amera No. 1 ho ea ho RS232, RS422, RS485 mela, ebe e hokahanya kou ea RS232-IN ea khamera No. 2 ka koung ea RS232-OUT ea khamera No. 'me qetellong e beha protocol e lumellanang, aterese le sekhahla sa baud ho keyboard ho laola khamera No. 1 kapa khamera No. 1 ka keyboard.
- Tatelano ya Mola: Ho sebelisa RS232 cascade connection, tlhahiso ea keyboard e hokahane le ho kenngoa ha khamera No.
Mokhoa oa ho hokahanya o sebelisang RS422 le RS485 cascade o batla o tšoana le oa RS232.
WEB Tlhophiso
Kena WEB
Khiboto le komporo e hokahantsoeng le LAN e tšoanang, bula sebatli, kenya aterese ea IP (aterese ea kamehla ea IP ke 192.168.1.180), kenya sebopeho sa ho kena, o ka khetha puo (Sechaena kapa Senyesemane), kenya lebitso la mosebelisi le phasewete ho login, joalokaha ho bontšitsoe ka ho le letona. 
(Mosebelisi oa kamehla: admin Password ea kamehla: admin)
Kamora ho kena ka katleho, o tla isoa ka kotloloho skrineng sa tlhophiso ea sistimi, joalo ka ha ho bonts'itsoe ka tlase.
Taolo ea Sesebelisoa
Patlo ea Sesebelisoa
Batla Liaterese tsa IP le liprothokholo tsa lik'hamera ho LAN e tšoanang 'me u li kenye ho tlhophiso ea keyboard; o ka eketsa liaterese tsa IP tsa khamera le liprothokholo ka letsoho.
Sesebediswa Configuration
Fetola le ho hlakola aterese ea IP, protocol le nomoro ea boema-kepe ea kh'amera e seng e hlophisitsoe.
WEB Tlhophiso
Ethernet Parameter
Beha li-parameter tsa marang-rang tsa keyboard, ho kenyelletsa le DHCP switch, IP Address, Netmask, Gateway, DNS, HTTP Port.
Ntlafatso ea Firmware
Lekola lebitso la sesebelisoa sa keyboard le tlhaiso-leseling ea mofuta, hape, o ka e kenya files ho ntlafatsa sistimi ea keyboard. Ka kopo u se ke ua tima ha u ntse u ntlafatsa.
Seta Botjha Dikgetho
Kenya bocha kapa qala bocha keyboard.
- Khutlisa/Qala bocha: E tsosolosa li-parameter tsohle ebe e tsosolosa sesebelisoa.
Akhaonto
Beha sebaka sa ho kena le password ea keyboard.
Pele kenya nomoro ea Akhaonto e lokelang ho hlophisoa, ebe u kenya phasewete e lokelang ho beoa habeli (Password, Tiisa Password), ebe o tobetsa "Save".
Ka mor'a ho beha nomoro ea akhaonto le password, ka kopo hopola nomoro ea akhaonto le password, ho seng joalo u ke ke ua khona ho kena WEB segokanyimmediamentsi sa sebolokigolo.
Lipotso Tse Botsoang Hangata
| Khafetsa Botsa Lipotso | |
| Tlhaloso e Ntle | Mehopolo ea Tharollo |
|
Khiboto ha e kgone ho laola khamera ka mokgwa wa netweke. |
Sheba hore na thapo ya netweke e hoketswe hantle. |
| Sheba hore na khamera e tshehetsa sete ya protocol. | |
Sheba hore na skrine ea keyboard e bontša hore e hokahane. Pontšo ea " ” e bontsha kgokelo e atlehileng. |
|
| Lekola hore na aterese ea IP, protocol le nomoro ea boema-kepe tse behiloeng ho keyboard li lumellana le tsa khamera. | |
| Sheba hore na keyboard le khamera li ho LAN e le 'ngoe. | |
| Sheba hore na aterese ea IP ea keyboard le aterese ea IP ea khamera li karolong e tšoanang ea marang-rang. | |
| Khiboto ha e khone ho laola khamera ka mokhoa oa RS232, RS422, RS485. | Sheba hore na likhoele tsa RS232, RS422, RS485 li ntle le hore na sebopeho se hlephile. |
| Hlahloba hore na T+, T-, R+, R- ea RS422 li hokahane ka phoso;
hlahloba hore na T+, T- ea RS485 e hokahane morao. |
|
| Hlahloba hore na aterese, protocol le sekhahla sa baud se behiloeng ho keyboard li lumellana le tsa khamera. | |
| Lik'hamera tse ling li ka laoloa, lik'hamera tse ling ha li khone ho laoloa. | Sheba hore na wiring ea karolo ka 'ngoe e tloaelehile. |
| Etsa bonnete ba hore liparamente tsa khoutu e 'ngoe le e 'ngoe ea aterese ea keyboard li lumellana le tsa khamera e fapaneng. | |
| Ha li laoloa ka keyboard, lik'hamera tse ngata li laoloa hammoho. | Sheba hore liprothokholo le liaterese tsa lik'hamera tse laoloang hammoho lia lumellana. |
Litokomane / Lisebelisoa
 |
Prestel KB-IP9N IP le Serial Joystick Remote Control Keyboard [pdf] Bukana ea Mosebelisi KB-IP9N, KB-IP9N IP le Serial Joystick Remote Control Keyboard, IP le Serial Joystick Remote Control Keyboard, Joystick Remote Control Keyboard, Remote Control Keyboard, Keyboard |