ECP APE 03 Notlela Alamo
TŠEBELETSO LE TŠEBELETSO
KHAOLO EA 1: SELELEKELA
1.1 MONNA KA KAmoreng e batang ea Alarm KIT KOTLO
MONNA EA ALARM KITENG KA KAmore E pholileng e na le:
- Setsi sa taolo ea alamo e bonoang / acoustic e tletse ka betri ea buffer.
- Litiiso tsa N° 3, tse lokelang ho kenngoa pakeng tsa screw fixing le lebokose le tšehetsang.
- Sesebelisoa sa mabone a kamore e batang ea tšohanyetso.
- Buka ea tšebeliso le tlhokomelo.
1.2 KHOUTU EA BOITSEBISO BA SEHLAHAKA
ECPAPE03
KIT e felletseng e nang le monna ea khanyang / acoustic ka alamo ea tšohanyetso ea phaposi e batang.
1.3 LITŠOANTŠISO TSA MOSEBETSI
| Lisebelisoa tsa motlakase | 230 Phomolo ea 50/60 Hz |
| Tšebeliso e phahameng ea matla a motlakase | 20 mA |
| Buffer betri | 12 V DC Ni-MH 1300 mAh Nako e felletseng ea ho nchafatsa: 110 h |
| Boikemelo ba ho sebetsa | - Ha 230 Vac HA E SEBELE (e sebetsa ka betri ea buffer e qositsoeng): hoo e ka bang lihora tse 14. - Ka matla a 230 Vac ON: I62 e se nang moeli |
| Mojule oa kantle ho kamore | Tekanyetso ea tšireletso ea IP43 Mocheso oa ho sebetsa: -5 - +45 °C |
| Litšobotsi tsa acoustic | Mofuta: piezoelectric Matla a molumo: 90 dB ho 1m |
| Temoso e bonahalang | LED e khubelu e benyang, 12 V DC |
| Konopo ea tšohanyetso ka kamoreng | Leseli: LED e khubelu, 12 V DC Khokahano ea NC Keypad e nang le lintlha tsa ts'ireletso ea IP65 Mocheso oa ho sebetsa: -25 - +70 °C |
| Phetiso e thusang | 8A AC1 puisano ea phapanyetsano (Relay e tiisitsoe ka alamo e butsoitse) |
1.4 DIMENSIS TSA KOPO YA TAOLO YA AALAMO
1.5 LITEKELO TSA TŠEBELETSO EA TŠEBELETSO EA TŠEBELETSO
1.6 LEBITSO LA KHETHO
Yuniti e hlalositsoeng bukeng ena, ka lehlakoreng la eona, e na le poleiti ea ID e bonts'ang lintlha tsohle tse amanang le boitsebahatso:
- Lebitso la Moetsi
- Khoutu ea UNIT
- Nomoro ea letoto
- Tekanyo ea tšireletso ea IP
- Phepelo ea motlakase voltage
1.7 TLHALOSO EA TSAMAISO
Sepheo sa tsamaiso ena ea tšireletso ke ho lumella motho ea qabeletsoeng ka kamoreng e batang ho kenya alamo ea acoustic / luminous e ka ntle ho kamore 'me kahoo a kope thuso. Sistimi e etselitsoe hore e sebetse le ha ho ka ba le ho tima ha motlakase ka nakoana: ketsahalong ena sistimi e tsamaisoa ke betri ea buffer e kentsoeng yuniting e kantle. E lumellana le UNI EN 378-1: 2016, e sebetsang likamoreng tse batang ka mocheso o fosahetseng le ka molumo o moholo ho feta 10 m³.
Sistimi e na le likarolo tse latelang:
- Konopo ea tšohanyetso e tla kenngoa ka har'a kamore e batang.
E na le konopo e khanyang ea mofuta oa li-mushroom e nang le khokahano ea NC. Pushbutton e khantšitsoe ka ho sa feleng ke li-LED e le hore e ka ba lefifing. - Setsi sa taolo ea alamo ea acoustic / pono e tla kenngoa kantle ho phaposi e batang.
E na le siren le lebone le benyang le betri ea buffer ho fana ka matla ha ho ka tima. Ho boetse ho na le khokahano e hloekileng (e koetsoeng ka alamo e buletsoe) e ka sebelisoang ho kenya lisebelisoa tse ling tse joalo ka mohala oa temoso o hole kapa li-siren tse ling.
Khokahano lipakeng tsa lisebelisoa tsena tse peli - e nang le lead e behiloeng ke sets'oants'o joalo ka setšoantšo sa wiring - e netefatsoa ke mohopolo oa polokeho ea sistimi. Ha loto e ka khaoloa kapa e khaoha, alamo e tla buloa hang-hang.
KHAOLO EA 2: HO KENYA
2.1 HO KENYA UNITI YA TAOLI YA ALARM E KA NTLE HO THUTO
- Hlakola li-screws tse 4 tse notlelang ka pele.
- Sebelisa likoti tse tharo tse teng ho lokisa lebokose le ka morao leboteng: sebelisa li-screws tse tharo tsa bolelele bo loketseng botenya ba lerako leo phanele e tla kopanngoa ho lona. Kenya washer ea rabara (e fanoeng) pakeng tsa sekoere se seng le se seng le lebokose le tšehelitsoeng.
Etsa likhokahano tsohle tsa motlakase joalo ka ha ho bontšitsoe setšoantšong sa khaolo ea 2.5. Ho etsa khokahanyo e nepahetseng ea motlakase le ho boloka litekanyetso tsa ts'ireletso, sebelisa likhoele tse nepahetseng tsa terata / mabelo ho netefatsa tiiso e ntle. Tsamaisa likhoele ka har'a yuniti ka mokhoa o hlophisehileng ka hohle kamoo u ka khonang: e-ba hlokolosi haholo ho boloka lithapo tsa motlakase li le hole le lithapo tsa mats'oao. Sebelisa likotoana ho tšoara lithapo hantle. - Koala karolo e ka pele, ho etsa bonnete ba hore lithapo tsohle li ka har'a lebokose le hore lebokose la tiiso le lutse setulong sa lona hantle. Tiisa phanele e ka pele u sebelisa li-screw tse 4, ho etsa bonnete ba hore ho sebelisoa masale a O a hloohong ea sekoti se seng le se seng.
2.2 HO KENYA PUSHBUTTON EA TŠEBELETSO EA KAHARE
- Konopo ea ka kamoreng e tlameha ho behoa e le hore e bonahale kamehla 'me e fihlellehe habonolo.
- Hlakola li-screw tse 'nè tse ka pele ho phanele ea li-pushbutton.
- Ho sebelisa likoti tse 'nè tse ka hare ho lokisa lebokose le tšehetsang ka li-screws tse' nè tsa bolelele bo loketseng botenya ba lerako leo le lokelang ho khomareloa ho lona.
2.3 TŠEBELETSO LE TLHOKOMELO
- Etsa lihokelo ho latela setšoantšo sa lithapo (Khaolo ea 2.5).
- Kamora ho hokela betri ho tla nka lihora tse 110 ho tjhaja betri ka botlalo.
- Tobetsa konopo e khanyang e kentsoeng ka phaposing e batang ho kenya tšebetsong lisebelisoa tsa temoso tsa acoustic le tse khanyang ho unit ea taolo ea alamo e kantle. Khokahano e thusang ea relay ea koala.
- Haeba matla a 230 V AC a tima, betri ea buffer e tla kenella ebe e matlafatsa sistimi bakeng sa nako e bontšitsoeng chate ea litšobotsi tsa tekheniki.
- Seta bocha switch ea tšohanyetso ka har'a phaposi e batang ho hlakola alamo.
- Nako le nako hlahloba hore na betri ea buffer e sebetsa hantle.
- Haeba betri e nkeloa sebaka, etsa bonnete ba hore e lahliloe hantle sebakeng se lumelletsoeng sa pokello ea litšila.
- Haeba alamo e khopiloe ntle le hore konopo ea pushe e tobe, hlahloba moeta-pele oa khokahano le likhokahano lipakeng tsa konopo le yuniti ea taolo ea kantle.
LIKAROLO TSE SEKETSEHILENG LE LITLHOKOMELISO:
Betri ea buffer: 100APEBATT
Konopo ea tšohanyetso: 100APEPUL2
2.4 TŠEBELETSO E PHAHAMENG
SEHLOOHO
| REF | TLHALOSO |
| 1 | LEbokose TS'ELETSO ABS |
| 2 | LEBOTO KHOPO MAKOE |
| 4 | TŠEHETSO TSA BATHO EA BUFFER HO LOKISA LIKARABA |
| 5 | LEBOTO |
| 6 | TŠEBELETSO EA BATTERY TŠEHETSO TSA TŠEPE |
| 9 | KAROLO KA PELE ABS |
| 10 | ACOUSTIC ALAMO |
| 11 | LEKOSI TS'OLO MAKOE |
| 12 | LIKAROLO TSA ALARM TSA ACOUSTIC/VISUAL |
| 13 | KHABANE KHABANE |
2.5 LIKHOKELO TSA MOHLASE
Tlhokomeliso: Pole e ntle ea betri (Fastom e nang le terata e khubelu) e qala e khaotsoe ho boloka tefiso nakong ea polokelo ea sehlahisoa.
Hang ha likhokahano tsa li-keypad tsa kamoreng li se li entsoe, ka hona, hoa hlokahala ho hokahanya fastom ena ho sehokelo se tšoailoeng (1) ka lehlakoreng le ka holimo le letšehali la boto joalo ka ha ho boletsoe setšoantšong sa wiring.
Ho eletsoa hore pele o hokela yuniti ea taolo ho konopo ea maemo a tšohanyetso e amanang le eona ebe o hokela betri le motlakase oa motlakase. Sena se tla thibela ts'ebetso ea alamo.
HLOKOMELA: Setsi sa maemo a tšohanyetso se fumanehang ka phaposing se ka ba le mabone a LED maemong a mabeli a fapaneng (A kapa B). Bona setšoantšo. Maemong ana ka bobeli, setšoantšo sa khokahano se lula se sa fetohe.
2.6 MELAO EA TIISETSO
Monna ea apereng alamo ea kamore e batang o koahetsoe ke waranti ea likhoeli tse 24 khahlanong le liphoso tsohle tsa tlhahiso ho tloha ka letsatsi le bontšitsoeng khoutu ea ID ea sehlahisoa. Haeba tsamaiso e sa sebetse hantle ka lebaka la tampering, tshusumetso kapa kemiso e sa nepahalang waranti e tla fetoha lefeela le lefeela. Ho khothaletsoa ka matla hore u boloke litaelo / tlhahisoleseling mabapi le litšobotsi tsa tekheniki tsa sesebelisoa.
Liphetoho life kapa life tse entsoeng ho lithapo le/kapa likarolo tsa ka hare kapa mosebetsi ofe kapa ofe o entsoeng ka tsela e sa lumellaneng le tlhahisoleseding/litaelo tse bukeng ena li tla etsa hore tiisetso e be lefeela le lefeela hang-hang. Liphetoho/mosebetsi o sa nepahalang le ona o ka baka ho se sebetse hantle, tšenyo e ke keng ea lokisoa, kotsi e mpe kapa ho beha batho/lintho tsietsing.
PEGO Srl e ke ke ea jarisoa molato bakeng sa liphoso tse ka bang teng kapa liphoso tse ngotsoeng bukeng ena ka lebaka la liphoso tsa khatiso kapa mongolo.
PEGO Srl e na le tokelo ea ho fetola lihlahisoa tsa eona kamoo e bonang ho hlokahala ntle le ho fetola litšobotsi tsa eona tsa mantlha. Phatlalatso e 'ngoe le e' ngoe e ncha ea bukana ea mosebelisi ea PEGO e nkela tse fetileng sebaka.
KEKETSO LEKHOTLA
A.1 PHATISO EA EU EA TUMELO
LA PRESENTE DICHIARAZIONE DI CONFORMITA' E' RILASCIATA SOTTO LA RESPONSABILITA' ESCLUSIVA DEL FABBRICANTE:
PHATALATSO ENA EA TUMELLANO E HLAHILE KA TLAS’A BOIKARABELO BO KHETHEHILENG BA MOHAPI:
PEGO Srl a socio unico – Via Piacentina 6/b, 45030 Occhiobello (RO) – Italy – Khampani e tlas’a taolo le khokahanyo ea Castel Srl
MOKHATLO OA SEHLAHISO KA SEBAKA
| KHOUTU | ECPAPE03 |
| TLHALOSO | Monna ka kamoreng e batang Alamo |
SEHLAHISO SE TUMELLANA LE MOLAO OA TŠOANENG OA TLHOKOMELISO EA EUROPE:
| Direttiva Bassa Tensione (LVD): | 2014/35 / UE |
| Vol e tlasetagtaelo ea e (LVD): | 2014/35/EU |
| Direttiva EMC: | 2014/30 / UE |
| Tšebelisano ea motlakase (EMC): | 2014/30/EU |
TUMELO E HLOKANG KE TATAISO E TIISETSOA KE HO PHETHAHALA HO MAEMO A LATELANG:
Litekanyetso tsa Europe: EN 60335-1:2012, EN 378-1:2016, EN 61000-6–1:2007, EN 61000-6–3:2007
SEHLAHISO SE ETSOETSOE HO KENYELETSOA MOSEBETSI OA KAPA HO KOPAKA MMOHO LE MOSEBETSI O MONG HO TLA TLA TSA MOSEBETSI HO LATELA KA Directive: EC/2006/42 “Machinery Directive”.
E saenetsoe le molemong oa:
Sebaka le Letsatsi la Tokollo: Occhiobello (RO), 01/01/2020
PEGO srl
Via Piacentina, 6/b 45030 Occhiobello ROVIGO – ITALY
Mohala +39 0425 762906
lengolo-tsoibila: info@pego.it - www.pego.it
THUSO MOR'A THEKISO
Mohala +39 0425 762906 lengolo-tsoibila: tecnico@pego.it
Morekisi:
PEGO srl e na le tokelo ea ho etsa liphetoho bukeng ena ea mosebelisi neng kapa neng.
Litokomane / Lisebelisoa
 |
Pego ECP APE 03 Notlela Alamo [pdf] Buka ea Taelo ECPAPE03, ECP APE 03 Lock in Alarm, ECP APE 03, Notlela Alamo, Alamo |