Lisebelisoa tsa PCE RRU 10 Sesebelisoa sa ho Pholisa Sehatsetsing

Tlhahisoleseding ya Sehlahiswa

Litlhaloso:

• Mohlala: PCE-RRU 10
• Sehatsetsi Sesebelisoa sa ho hlaphoheloa
• Boima ba 'meleboima: 23.2 lik'hilograma
• Litšoantšo KhoutuTlhaloso: RR24M

Litaelo tsa Tšebeliso ea Sehlahisoa

Mehato ea Tšireletso:
Pele o sebelisa yuniti ea ho hlaphoheloa, ka kopo bala bukana ka hloko ho utloisisa mehato ea ts'ireletso:

• Ke setsebi se tšoanelehang feela se lokelang ho sebetsa yuniti ea ho hlaphoheloa.
• Etsa bonnete ba hore lisebelisoa li thehiloe hantle pele u qala.
• Lithapo tsa motlakase li tlameha ho hokelloa hantle le ho theoa fatše ke ramotlakase ea nang le tsebo.
• Motlakase o tlameha ho khaoha 'me ho se be le pontšo ho LCD pele o hlahloba kapa o lokisa.
• Haeba thapo ea phepelo ea motlakase e senyehile, e khutlise ka hloko kapa u reke e ncha ho tsoa ho mofani oa thepa.

Sebelisa Panel:
Phanele ea ts'ebetso e na le likarolo tse fapaneng:

• E koetsoe: Valofo e kenang e koetsoe
• Hlakola: Belofo ea ho kenya e butsoe hanyenyane
• Ka potlako: Belofo ea ho kenya e butsoe ka botlalo
• Hloekisa: Ntho e kentsoeng e koetsoe, 'me tlhahiso ea buloa ho tlosa sehatsetsi
• Semumu: Litemoso tse utluoang le li-beeps li tingoe
• Qala hape: Tobetsa QALA ho qala tšebetso ka mor'a phoso

Mokhoa oa ho sebetsa:

1. Hokela li-hoses ka nepo le ka thata joalo ka setšoantšo sa khokahano.
2. Netefatsa hore li-valve tsa mouoane le metsi tsa sistimi ea AC le tanka ea ho hlaphoheloa li koetsoe.
3. Ela hloko ho baloa ha khatello e tlase, ha e fihla ho -20inHg, LP cutoff ea buleha, 'me mochini o emisa ho sebetsa.

TŠIRELETSO KAKARETSO

Sebelisa tlhahisoleseling

• Bakeng sa ho lelefatsa ts'ebeliso ea yuniti ea ho hlaphoheloa, ka kopo bala bukana ka hloko pele o e sebelisa, e ka u thusang ho utloisisa ka botlalo ts'ireletso, litlhaloso tsa ts'ebetso ea ts'ebetso ea yuniti ea ho hlaphoheloa.
• Ka kopo lekola sehlahisoa se amohetsoeng se ts'oana le seo u se laetseng. Ka kopo sheba sehlahisoa haeba ho na le tšenyo nakong ea lipalangoang. Ikopanye le morekisi oa lehae haeba bothata bo kaholimo bo fumanoe.
• Ka kopo bala bukana ka hloko 'me u sebelise yuniti ho latela mekhoa ea ts'ebetso ea sehlahisoa.

Pontšo ea polokeho

• temoso
  Letšoao lena le supa lits'ebetso tse lokelang ho bolokoa ka hloko ho thibela likotsi ho batho.
• Hlokomela
  • Letšoao lena le bonts'a lits'ebetso li tlameha ho bolokoa ka hloko ho thibela tšenyo kapa tšenyo ea yuniti.
  • Litaba tse hlokang tlhokomelo
• temoso
  • Ke setsebi se tšoanelehang feela se ka sebetsang yuniti ena ea ho hlaphoheloa.
  • Pele o qala lisebelisoa, etsa bonnete ba hore li na le weil grounded.
  • Ha o ntse o sebelisa terata ea motlakase, terata e tlameha ho hokelloa le ho theoa fatše.
  • Ke setsebi sa motlakase se tšoanelehang feela se ka etsang khokahano ea terata ho latela maemo a tekheniki le setšoantšo sa potoloho.
  • Motlakase o tlameha ho khaoloa hangata 'me o se be pontšo ho LCD pele o hlahloba kapa o lokisa. II thapo ea phepelo ea motlakase ea mantlha e senyehile, khetha ka hloko bakeng sa e nkelang sebaka, kapa o ka reka ka kotloloho ho tsoa ho morekisi.
  • Ka kopo nka phepelo ea motlakase le bokhoni ba ammeter ea hau le terata ea motlakase.
  • Ho ka sebelisoa feela litanka tsa sehatsetsi tse lumelletsoeng ho tlatsoa hape. E hloka tšebeliso ea litanka tsa ho hlaphoheloa ka khatello e fokolang ea ho sebetsa ea 45 bar (652.6 psi). U se ke ua tlatsa tanka ea ho hlaphoheloa, boholo ba matla a 80% ho etsa bonnete ba hore ho na le sebaka se lekaneng bakeng sa katoloso ea metsi. Ho tlatsa tanka ho feta tekano ho ka baka ho phatloha ho matla.
  • Kamehla roala likhalase tsa mahlo tsa polokeho le liatlana.
  • Se ke oa sebelisa sesebelisoa sena pela metsi a chang kapa peterole.
  • Ho hlokahala sekala sa motlakase ho thibela ho tlatsa.
  • Etsa bonnete ba hore sebaka seo u sebetsang ho sona se na le moea o lekaneng.
• Hlokomela
  • Etsa bonnete ba hore yuniti e sebetsa tlasa phepelo e nepahetseng ea motlakase.
  • Ha o sebelisa thapo ea katoloso e lokela ho ba bonyane 14 AWG mme e se ke ea feta maoto a 25, ho seng joalo e ka baka voltage theola le ho senya konpresser.
  • Khatello e kenang ea yuniti ha ea lokela ho feta 26bar (377.0psi) .
  • Yuniti e hloka ho beoa ka mokhoa o rapameng, ho seng joalo e tla lebisa ho thothomela ho sa lebelloang, lerata kapa le ho hlajoa ka lehloeo.
  • Se ke oa beha lisebelisoa letsatsing kapa pula.
  • Pulo ea moea o kenang ea yuniti ha ea lokela ho koaloa.
  • Haeba mosireletsi ea imetsoeng haholo a hlaha, e behe hape kamora metsotso e 5.
  • Ha u etsa ts'ebetso ea ho itlhoekisa, konopo e tlameha ho fetoloa butle ho "PURGE" ho netefatsa hore khatello ea ho kena e ka tlase ho 5 bar (72.5 psi).
  • Haeba hamore ea mokelikeli e etsahala nakong ea pholiso, ka kopo o otlolle kotola butle butle ho "TSOA" mme o se ke oa lumella khatello ea ho bala hore e theohele ho zero.
  • Ho etsa bonnete ba hore mochini o sebetsa ka mokhoa o tsitsitseng, koala konopo sebakeng se haufi ha khatello ea phallo e feta 27 bar (391.6 psi), ho fokotsa khatello ea ho kena (eseng ho fihla ho 0). Ketso ena ke ho etsa hore khatello ea phallo e tsitsitse kapa e fokotsehe, khatello e laoloang e be tlase ho 30bar (435.1 psi).
  • Thepa e reretsoe ho sebeletsa li-air-conditioning le lisebelisoa tsa sehatsetsi tse nang le li-lbs tse fetang 200 tsa sehatsetsing se phahameng sa khatello.
  • Tanka le hose tse sebelisoang li tlameha ho tsamaellana le melao ea lehae.

TS'EBETSO MAKOANE

1. Se ke oa kopanya lihatsetsi tse fapaneng hammoho ka tankeng e le 'ngoe, ho seng joalo li ka se aroloe kapa tsa sebelisoa.
2. Pele o hlaphoheloa sehatsetsing, tanka e lokela ho fihlela boemo ba lephaka: -29.6inHg, bakeng sa ho hloekisa likhase tse sa keneng. Tanka e ngoe le e ngoe e ne e tletse naetrojene ha e ne e etsoa fekthering, ka hona naetrojene e lokela ho fallisoa pele e sebelisoa pele.
3. Konopo e lokela ho ba sebakeng sa "Close" pele e sebetsa. Li-valve tsohle li tlameha ho koaloa, lisebelisoa tsa ho kenya le ho tsoa li lokela ho koaheloa ka li-caps tse sireletsang ha sesebelisoa se sa sebetse. Mongobo oa moea o kotsi ho sephetho sa ho hlaphoheloa 'me o tla khutsufatsa nako ea bophelo ea yuniti.
4. Sefafatsi se lokela ho sebelisoa kamehla 'me se nkeloe sebaka sa kamehla. 'Me mofuta o mong le o mong oa sehatsetsi o tlameha ho ba le sefe ea oona. Bakeng sa ho netefatsa ts'ebetso e tloaelehileng ea yuniti, ka kopo sebelisa sefa se boletsoeng ke k'hamphani ea rona. Sefafatsi sa boleng bo holimo se tla tlisa litšebeletso tsa boleng bo holimo.
5. Ho hlokahala tlhokomeliso e khethehileng ha u hlaphoheloa tsamaisong, 'me ho hlokahala li-filters tse peli tse omeletseng.
6. Yuniti e na le mosireletsi oa Khatello e Phahameng ea kahare. Haeba khatello e kahare ho sistimi e le kaholimo ho khatello e koetsoeng (bona lintlha), konpresser e tla koala ka bo eona 'me HP cutoff e bonts'a.

Ho qala konpresser hape, ka kopo theola khatello ea kahare (Gauge ea khumo e supa tlase ho 30 bar / 435.0 PSI), kamora ho panya ha HP cutoff, ebe o tobetsa konopo ea "Start" ho qala konteraka hape.

Ha ts'ireletso ea khatello e phahameng e qala, ka kopo, fumana sesosa 'me u sebetsane le sona pele o qala sesebelisoa bocha.

1. Sephahla se kenang sa tanka ea sehatsetsi se koetsoe-- ho bula valve ho tla thusa ho rarolla bothata.
2. Hose e kopanyang pakeng tsa yuniti ea ho hlasimolla le tanka ea sehatsetsi e khomaretsoe——koala li-valve tsohle ’me u nkele hose e kopanyang sebaka.
3. Thempereichara ea tanka ea sehatsetsi e phahame haholo, khatello e phahame haholo e bakang khatello e phahameng- etsa hore tanka e pholile.

LIEKETSENG PANELE EA TŠEBELETSO

• Koala: Valofo e kenang e koetsoe
• Hlakola: Belofo ea ho kenya e butsoe hanyenyane
• Ka potlako: Belofo ea ho kenya e butsoe ka botlalo
• Hloekisa: Kenyelletso e koetsoe, 'me tlhahiso ea buloa ho lumella yuniti hore e tlose boholo ba sehatsetsi ka har'a mochini oa ho hlaphoheloa.

Bothata: Likhoutu tsa Phoso

• E1: Sensor ea khatello e khaotsoe
• Molato 2: Input voltage tlase haholo
• Molato oa 3: Tlatsetso e phahameng voltage
• Molato oa 4: Ts'ireletso e fetelletseng
• Phoso 5: Mocheso oa Sensor Breaker
• Phoso ea 6: Sensor ea mocheso Potoloho e Khutšoane
• Phoso ea 7: Sesireletsi sa mocheso oa mocheso.

1. Semumu: Litemoso tse utloahalang le li-beep lia tingoa
2. Fane: Letšoao lena lea potoloha ha mochini o ntse o sebetsa. Ha mochine o emisa, letšoao le ntse le le teng
3. Qala hape: E tla khanya ka mor'a hore phoso e hlahe 'me e rarolloe. Ho tobetsa START ho tla qala tšebetso hape.

LIEKETSE LITŠOANTŠISO

Lebitso la likarolo

1. Leqele Lehlakoreng
2. Fane
3. Sekoahelo sa Tataiso ea Moea
4. Motor
5. Ts'ehetsa Assyria
6. Polete e holimo
7. Knob
8. Laola Assy
9. Assy ea valve
10. Silinda
11. Ho kopanya
12. Sekontiri
13. Condenser
14. Plate e ka morao
15. Letlapa le ka lehlakoreng le letona
16. Motheo
17. Taolo ea makoloi
18. Letlapa le ka Pele la Lehlakore
19. Lekhalo

TS'ELISO

Lihatsetsi	Sehlopha[II: R12,R134a,R401C,R406A,R500,1234YF SehlophaIV: R22, R401A, R401B, R402B, R407C, R407D, R408A, R409A, R502, R509 Sehlopha sa V : R402A,R404A,R407A,R407B,R410A,R507, R32
Matla	220V-230V AC, 50/60Hz 11 SV AC, 60Hz
Maximal Draw ea Hona Joale	6A 12A
Motor Brushless Motor 1 HP
Lebelo la makoloi	3000 RPM
Compressor	Oli e fokolang, e pholileng moeeng, Piston
Mosireletsi oa khatello e phahameng	38.5bar/3850kPa(558psi)
Mocheso oa ho sebetsa	32 104°F
Fenyasions	14.5 × 9.9 × 11.7 inch
Boima bo kahare	23.2 liponto

NRDD

Lihatsetsi	R134a	R22	R410A
Mokelikeli	2.6 lik'hilograma/mots	2.9 lik'hilograma/mots	3.9 lik'hilograma/mots
Sututsa / Hula	7.5 lik'hilograma/mots	8.5 lik'hilograma/mots	9.5 lik'hilograma/mots

Hlokomela
Sekhahla sa phallo ea mouoane se lekana le khatello e kenang.

LIEKETSENG PANELE EA TŠEBELETSO

• Qala/Emisa: E qala ho emisa yuniti
• LP Fetoha: Ema metsotsoana e 3 ho fetola pakeng tsa LP1, LP2, LP3
• Liyuniti / Zero: Tobetsa ho fetola diyuniti ho InHg, Kpa, Psi, Kg/f, Bar, Mpa. Ema metsotsoana e 3 hore u se ke ua bala
• Hlakola Alamo: Tšoara Metsotsoana e 3 ho khutsisa yuniti ea ho hlaphoheloa
• LP1: (Auto shutoff ka manual restart) Haeba khatello ea inlet e le tlase ho -20inHg bakeng sa metsotsoana ea 20, sesebelisoa se tla koala. "LP Cutoff" e tla hlahisoa. Ha LP ≥ 0 inHg u tlameha ho tobetsa START ho qala yuniti ea ho hlaphoheloa bocha
• LP2: (Auto Shutoff with automatic restart) Haeba khatello ea inlet e ka tlase ho -20 inHg bakeng sa metsotsoana e 20 yuniti e tla koala "LP Cutoff" e bonts'itsoe. Ha LP ≥ 0 inHg yuniti e tla qala bocha ka bo eona
• LP3: (Continuous Run) Sehlopha sa ho hlaphoheloa se tla sebetsa ka ho tsoelang pele, ho sa tsotellehe hore na khatello ea ho kenya e boemong bofe (LP)
• Khaollo ea OFP: E Tla Khantša ha silindara ea ho hlaphoheloa e tlatsitsoe ka 80%, kapa haeba thapo ea OFP e khutsufalitsoe. Mochine o tla emisa ho sebetsa
• LP Cutoff: E tla khantša ha sesebelisoa sa khatello e tlase se butsoe ka metsotsoana e fetang 20 ka tlase ho -20 inHg
• HP Cutoff: E tla Khantša ha sesebelisoa sa khatello e phahameng se kentsoe ka holimo ho 560 Psi

LETŠOANTŠO LEOOETSOANG

Khoutu ea Graphics	ITEM
HS	Sensor e Phahameng ea Khatello
M	Motor
MCB	Boto ea Taolo ea Likoloi
XS	Soketeng
DCB	Digital Gauge Control Board
LS	Sensor e hatellang e tlase
OFP	Ho Feta ho Tlatsa Mosireletsi
TP	Mosireletsi oa Mocheso
HP	Phetoho e Phahameng ea Khatello
TS	Sensora ea Mocheso

TAELO MOSEBETSI

Refrigerant hoses exhaust

E loketse ho sebetsa
Kopanya likhopo ka nepo le ka tieo. (Ka kopo sheba sets'oants'o sa khokahano)

1. Netefatsa belofo ea mouoane le phepelo ea mokelikeli ea AC li haufi haholo.
2. Netefatsa belofo ea mouoane le phepelo ea mokelikeli ea tanka ea ho hlaphoheloa li maemong a haufi.
3. Bula li-valve tse nang le mouoane le metsi tse ngata.
4. Lokolla liphaephe tse hokelang tsa tanka ea sehatsetsi.
5. Bula valve ea ho hlahloba lipeipi.
   Qala ts'ebetso
6. Kenya polaka mochini, bulela motlakase, mme LCD e bontša likhatello.
7. Phetla kotola ho "hlaphoheloa".
8. Tobetsa konopo ea "QALA" ho qala mochini, o qala ho hloekisa moea o kahare oa hose.
9. Ela hloko ho baloa ha tekanyo e tlaase ea khatello ha e fihla ho -20inHg, ka mor'a metsotsoana e 20, LP cutoff e bulela 'me mochine o emisa mosebetsi.
10. Bulela konopo ho "Haufi", LP cutoff blinks, tobetsa konopo ea motlakase ebe o qala mochini.
11. Tlosa kotola butle butle ho "Tlosa" 'me u qale ho itlhoekisa.
12. Ela hloko ho baloa ha tekanyo e tlaase ea khatello ha e fihla ho -20inHg ka lekhetlo la bobeli, ka mor'a metsotsoana e 20, LP cutoff ea bulela 'me mochine o emisa mosebetsi.
    Qetella ts'ebetso
13. Phetla kotola ho "Koala" 'me u emise ho itlhoekisa.
14. Kopanya hose ea sehatsetsing ka tanka.

Mokhoa oa ho hlaphoheloa

E loketse ho sebetsa
Kopanya likhopo ka nepo le ka tieo. (Ka kopo sheba sets'oants'o sa khokahano)

Etsa bonnete ba hore li-valve tsohle li koetsoe.

1.  Tima matla a lisebelisoa tsa sehatsetsi.
2. Bula li-valve tsa sehatsetsi tsa mouoane le mokelikeli.
3. Bula belofo ea mouoane ea tanka ea sehatsetsi.
   Qala ts'ebetso
4. Phetla kotola ho "hlaphoheloa".
5. Tobetsa konopo ea "Start" ho qala mochini.
   1. Haeba u hlaphoheloa sehatsetsi se nang le mokelikeli, ka kopo bula sephahla se metsi sa gauge e mengata.
   2. Haeba u hlaphoheloa sehatsetsing, ka kopo bula sephahla sa mouoane sa gauge e mengata.
6. Mokhoa oa ho hlaphoheloa o tla phethoa ha mochini o sebetsa ho isa tekanyong e itseng ea vacuum kapa ho koala othomathike ea tšireletso e tlase ea khatello. U se ke ua tima matla ka mor'a hore u hlaphoheloe 'me u tsamaise ka ho toba mokhoa oa ho itlhatsoa.

Hlokomela
Hamore ea Olf fluid e etsahala nakong ea ho hlaphoheloa, ka kopo fetola konopo ho "Bula" butle butle, Ebe palo ea tekanyo e tlase ea khatello e theoha ho fihlela hamore ea mokelikeli e emisa; empa u se ke ua lumella khatello ea ho bala e theohela ho zero, ho seng joalo sekepe se kenang ha se pompe hang hang. khatello ea zero.
Haeba ho le thata ho qala, retelehela ho * CLOSE * ha o le metsi, retelehela ho "PURGE" ha mouoane, ebe o tobetsa "QALA" ho qala mochine hape, 'me u fetohele sebakeng se hlokahalang.

Mokhoa oa ho itlhoekisa
Hlokomela
Yuniti e tlameha ho hloekisoa ho fetola tšebeliso e 'ngoe le e' ngoe; Sehatsetsi sa metsi se setseng se ka hola le ho senya likarolo le ho silafatsa tikoloho.

Qala ts'ebetso

1. Mochini o ema ka bohona ka mor'a hore ho hlaphoheloe ho felile ka LP cutoff e buletsoe.
2. Phetla kotola ho "Koala" le LP cutoff blinks, tobetsa "QALA" konopo ho qala mochini.
3. Fetolela konopo ho "Tlosa" 'me u qale ho hloekisa.
4. Mokhoa oa ho hlatsoa seif o tla phethoa ha mochini o sebetsa ho isa tekanyong e itseng ea vacuum.
   Qetella ts'ebetso
5. Fetola kotola ho "Koala".
6. Tlosa konopo ea motlakase. Hakolla thapo ea motlakase.
7. Koala valve ea ho lekola e hokahantsoeng le ho qeta.
8. Tlosa valve ea wpor ea tanka.
9. Hlakola li-hoses tsohle.

Mokelikeli oa ho sututsa / ho hula mokelikeli
Tlhokomeliso: Ho hlokahala sekala sa motlakase ho lekola ts'ebetso ea ho hlaphoheloa ho thibela ho tlala haholo.

E loketse ho sebetsa
Kopanya li-hoses ka nepo le ka thata. (Ka kopo sheba setšoantšo sa khokahano) Etsa bonnete ba hore li-valve kaofela li koetsoe.

Qala ts'ebetso

1. Bula vaporvalve, valve ea metsi ea sistimi ea HVAC
2. Bula sephahla sa mouoane, belofo ea metsi ea tanka.
3. Phetla kotola ho "hlaphoheloa".
4. Tobetsa konopo ea "QALA" ho qala mochini, ebe o qala mochini oa push/pull mode. Haeba 'malo sekaleng o lula o tšoana kapa o fetoha butle, ho bolela hore mokelikeli o ka har'a sistimi ea HVAC o khutlisitsoe mme mokhoa oa ho khutlisa mouoane o ntse o tsoela pele.
5. Bulela kotola butle butle ho "Tlosa" ebe o qala ho itlhoekisa ka mokhoa o hloekileng bakeng sa mokelikeli.
6. Fetola kotola ho "Koala".
7. Koala sephahla sa mouoane, belofo ea mokelikeli ea sistimi ea HVAC.
8. Koala valve ea mouoane, e belofo ea metsi ea tanka.
9. Hokela hoses hape 'me u qale mokhoa oa ho hlaphoheloa moeeng.

Qetella ts'ebetso

HO BATLE PHOSO

Bothata	Lebaka	Tharollo
LCD ha e sebetse kamora hore motlakase o laoloe	1. Thapo ea motlakase e senyehile.	1. Tlosa thapo.
	2. Khokahano ea kahare e hlephile.	2. Lekola khokahano.
	3. Ho hokela ho J6 ho senyehile.	3. Tlosa sehokelo.
	4. Ho se sebetse ha boto ea potoloho.	4. Fetola boto ea potoloho ea MCB kapa DCN. Ikopanye le VALUE ea tšehetso ea theknoloji.
Mochini ha o mathe kamora ho tobetsa START	1. HP Cutoff, kapa OFP Cutoff ea sebetsa (lipontšo tsa skrine).	1. Lekola hore na khokahano lipakeng tsa HP kapa OFP le DCB e ntle.
	2. Phoso 2 kapa Fault 3.	2. Fetola ho lokisa voltage.
	3. Phoso 4, qalo e ngata haholo.	3. Fetolela ho "CLOSE" ha u le metsi, fetola "PURGE" ha u le mouoane, ebe u tobetsa "QALA" ho qala hape.
	4. Phoso 5.	4. Sheba hore na kamano pakeng tsa TS le MCB e ntle. Haeba ho lokile, ikopanye le ts'ehetso ea theknoloji ea VALUE.
	5. Phoso 6.	5. Sheba hore na khokahano ea TS e senyehile. Haeba ho se joalo, ikopanye le tšehetso ea theknoloji ea NAVAC.
	6. Phoso 7.	6. Lekola hore na khokahano lipakeng tsa TP le MCB e ntle. Haeba ho le molemo, ikopanye le tšehetso ea theknoloji ea NAVAC.
	7. Konopo e senyehile.	7. Kenya sebaka sa digital gauge.
	8. Boto ea potoloho e senyehile.	8. Kenya sebaka sa boto ea potoloho.
Mochini o emisa kamora ho sebetsa nako e telele	1. Ts'ebetso e fosahetseng e baka HP Cutoff.	1. Sheba temana ea 6 ea OPERATION ANUAL.
	2. Thermal protector e butswe mme e bonts'a Fault 7.	2. Ha molato oa 7 le Restart flash, tobetsa Start.
	3. Sehatsetsi ke 80% ka tankeng, 'me OFP Cutoff e bontša.	3. Tlosa tanka. Ha OFP Cutoff le Restart flash, tobetsa QALA.
	4. Mosebetsi oa ho hlaphoheloa o felile. Lipontšo tsa LP Cutoff.	4. E ka qala hape bakeng sa mosebetsi o mong.
E1 e bonts'a LP kapa HP	Sensor ea khatello ha e kopane hantle kapa ke potoloho e khuts'oane.	Lekola hore na khokahano lipakeng tsa LS kapa HS le DCB e ntle. Haeba e le ntle, nka sebaka sa sensor ea khatello.
Sekhahla sa ho hlaphoheloa butle	1. Khatello ea tanka ea sehatsetsing e phahame haholo.	1. Ho pholisa tanka ho thusa ho fokotsa khatello.
	2. Lesale la piston la compressor le senyehile.	2. Ikopanye le tšehetso ea theknoloji ea VALUE.
Se ke oa tsoa	1. Hose ea khokahano e lokolohile.	1. Tiisa li-hoses tsa ho hokahanya.
	2. Ho lutla ha mochini.	2. Ikopanye le tšehetso ea theknoloji ea VALUE.

Ho lahla

• Bakeng sa ho lahla libetri ho EU, taelo ea 2006/66/EC ea
• Paramente ea Europe e sebetsa. Ka lebaka la lintho tse silafatsang tse teng, libeteri ha lia tlameha ho lahloa e le litšila tsa ka tlung. Li tlameha ho fuoa libaka tsa pokello tse etselitsoeng morero oo.
• E le ho latela taelo ea EU 2012/19/EU re khutlisetsa lisebelisoa tsa rona morao. Re ka li sebelisa hape kapa ra li fa k'hamphani e etsang lintho hape e lahlang lisebelisoa ho latela molao.
• Bakeng sa linaha tse kantle ho EU, libeteri le lisebelisoa li tlameha ho lahloa ho latela melao ea sebaka sa heno ea litšila.
• Haeba u na le lipotso, ka kopo ikopanye le PCE Instruments.

PCE Instruments Contact Information

Jeremane

• PCE Deutschland GmbH Im Langel 26 D-59872 Meschede Deutschland
• Mohala: +49 (0) 2903 976 99 0
• Fekse: +49 (0) 2903 976 99 29
• info@pce-instruments.com
• www.pce-instruments.com/deutsch

united kingdom

• PCE Instruments UK Ltd Trafford House Chester Rd, Old Trafford Manchester M32 ORS United Kingdom
• Mohala: +44 (0) 161 464902 0
• Fax: +44 (0) 161 464902 9
• info@pce-instruments.co.uk
• www.pce-instruments.com/english

Netherlands

• PCE Brookhuis BV Institutenweg 15 7521 PH Enschede Nederland
• Phone: + 31 (0) 53 737 01 92
• info@pcebenelux.nl
• www.pce-instruments.com/dutch

Fora

• PCE Instruments France EURL 23, rue de Strasbourg 67250 Soultz-Sous-Forets France
• Mohala: +33 (0) 972 3537 17
• Nomoro ea fax: +33 (0) 972 3537 18
• info@pce-france.fr
• www.pce-instruments.com/french

Spain

• PCE Ibérica SL Calle Mula, 8 02500 Tobarra (Albacete) España
• Mohala: +34 967 543 548
• Fax: +34 967 543 542
• info@pce-iberica.es
• www.pce-instruments.com/espanol

Italy

• PCE Italia srl ​​Via Pesciatina 878 / B-Interno 6 55010 Loc. Gragnano Capannori (Lucca) Italia
• Thelefono: +39 0583 975 114
• Fax: +39 0583 974 824
• info@pce-italia.it
• www.pce-instruments.com/italiano

kalakuni

• PCE Teknik Cihazlari Ltd. Sti. Halkali Merkez Mah. Pehlivan Sok. No.6/C 34303 Küçükçekmece – Istanbul Türkiye
• Mohala: 0212 471 11 47
• Fekese: 0212 705 53 93
• info@pce-cihazlari.com.tr
• www.pce-instruments.com/turkish

Amerika

• PCE Americas Inc. 1201 Jupiter Park Drive, Suite 8 Jupiter / Palm Beach 33458 FL USA
• Mohala: +1 561-320-9162
• Fax: +1 561-320-9176
• info@pce-americas.com
• www.pce-instruments.com/us

Denmark

• PCE Instruments Denmark ApS Birk Centerpark 40 7400 Herning Denmark
• Mohala: +45 70 30 53 08
• kontakt@pce-instruments.com
• www.pce-instruments.com/dansk

www.pce-instruments.com

LBH

P: Ke lokela ho etsa eng haeba thapo ea phepelo ea motlakase e senyehile?
K: Khetha thapo e ncha ka hloko kapa u reke e 'ngoe ho tsoa ho morekisi ho netefatsa polokeho.

P: Ke mang ea lokelang ho sebetsa yuniti ea ho hlaphoheloa?
A: Ke setsebi se tšoanelehang feela se lokelang ho sebetsa yuniti ea ho hlaphoheloa ho thibela likotsi.

Litokomane / Lisebelisoa

Lisebelisoa tsa PCE RRU 10 Sesebelisoa sa ho Pholisa Sehatsetsing [pdf] Bukana ea Mosebelisi RRU 10, RRU 10 Recovery Recovery Device, RRU 10, Refrigerant Recovery Device, Recovery Device.

Litšupiso

• Bukana ea Mosebelisi