Sound Level Meter
Tlhaloso: PCE-TSM5
Buka ea Mosebelisi
Ka kopo bala bukana ena ea mosebelisi ka botlalo pele u sebelisa yuniti ena 'me u e boloke ka nepo molemong oa hau oa nako e tlang.
1. 
Polokeho
Bala lintlha tse latelang tsa polokeho ka hloko pele u leka ho sebelisa metara.
▲ Maemo a tikoloho
- RH≤90％(Non-Condensation)
- Mocheso oa ho sebetsa: -20～60℃/-4～140℉
▲ Tlhokomelo
- Litokiso kapa litšebeletso li lokela ho etsoa feela ke basebetsi ba nang le tsebo.
- Hlakola yuniti ka lesela le bonolo le omeletseng. U se ke ua sebelisa li-abrasives kapa solvents sesebelisoa sena
Latela EMC
2. Lisebelisoa
Sesebelisoa sena se nka microphone ea capacitive e le sensor, 'me e na le lipalo tse phahameng tsa MCU, tse nang le tekanyo e phahameng ea tekanyo le karabo e potlakileng. E loketse boenjiniere ba lerata, taolo ea boleng, thibelo le taolo ea bophelo bo botle le litekanyo tse fapaneng tsa molumo oa tikoloho, joalo ka boenjiniere ba kaho, feme, sekolo, sepetlele, laeborari, ofisi, lehae.
3. Likarolo
➢ Pontšo e kholo ea LCD ea mebala ea HD
➢ Karabelo ea maqhubu a pharalletseng le ho nepahala ho holimo
➢ Ts'ebetso ea alamo ea khanya le lentsoe
➢ Boleng ba alamo bo ka hlophisoa
➢ Hlophisa puo ea temoso ea linaha tse ts'eletseng ka boikhethelo
➢ 15S Nako ea khaso ea ho rekota e itlhalosang 15S
➢ Tshebetso ya ho notlela skrini
➢ Taolo ea remoutu le ts'ebetso ea remoutu
➢ Mosebetsi oa tlhahiso ea molumo
4. Litlhaloso
| Lekhalo la ho lekanya | 35dB ~ 135dB |
| Dynamic range | 50dB |
| Karabelo ea khafetsa | 31.5Hz ~ 8KHz |
| Ho nepahala | ±2.0dB |
| Boima ba khafetsa | Marang-rang a boima |
| Microphone | 1/2 inch electret condenser microphone |
| Ntlafatso ea boleng | 500ms |
| Lipuo tse tšeletseng | Senyesemane, Sepanish, Sefora, Sejeremane, Sejapane, Sechaena |
| Mosebetsi oa ho rekota | 15S |
| Potlako e fetang lebelo | ＞ 135DB, letshwao la “Hi” le a hlaha; ＜ 35 DB, letshwao la “LO” le a hlaha |
| Tlhophiso ea boleng bo phahameng ba alamo | √ |
| Mosebetsi oa tlhahiso ea molumo | √ |
| Ho fetola molumo | √ |
| Taolo e hole | √ |
| Bophelo ba betri | 60hours |
| Matla | Adapter; DC 9V/1A, bophara ba ka ntle 5.5mm, bophara ba ka hare 2.0mm, palo e ntle e bohareng |
| AA LR6 1.5V × 6 | |
| Mocheso o sebetsang le mongobo | -20℃～60℃/-4℉～140℉,10%RH～ 90%RH |
| Mocheso oa polokelo le mongobo | -20℃～60℃/-4℉～140℉,10%RH～ 75%RH |
| Boholo | 197*176*49mm |
| Boima ba 'mele | 623g |
5. Tlhaloso ea Meter
(1) Skrine e bonts'ang
(2) Sekoti sa ho rekota
(3) Linotlolo tsa mosebetsi
(4) Lenaka
(5) Sekoti se amohelang infrared
(6) Linotlolo tsa mosebetsi
(7) Sensor ea ho lemoha lerata
(8) Ho lokisoa ha lerata lesoba le nepahetseng la phetoho
(9) Mokoti oa tlhahiso ea molumo
(10) Jack ea adaptara
(11) Mokoti o leketlileng
(12) Kamore ea betri
6. Tlhaloso ea Pontšo
(1) Letšoao la ho tsebahatsa molumo
(2) Letšoao la ho kena ka adaptara
(3) Phallo e tlasetage letshwao le potlakileng
(4) Sebaka sa pontšo ea boleng ba lerata
(5) Letšoao la yuniti ea lerata
(6) Letšoao la senotlolo sa skrine
7. Tlhaloso ea Ts'ebetso ea Mosebetsi
1) Ts'ebetso ea ho tima / ho tima; Tobetsa "
” konopo ho qala meter, ebe o tobetsa "” konopo bakeng sa metsotsoana e 3 ho koala mochini
2) Mosebetsi oa alamo
a. Alamo ea leseli le mosehla, ka mokhoa oa ho lekanya, ha boleng ba tekanyo bo le boholo ho feta boleng bo tlalehiloeng, leseli le mosehla le ntse le bonesa.
b. Alamo ea lebone le khubelu. ka mokhoa oa ho lekanya, ha tekanyo ea tekanyo e le khōlō ho feta tekanyo ea alamo e behiloeng ke lebone le lefubelu, lebone le khubelu le ntse le khanya ka ho tsoelang pele 'me lentsoe le tlalehoa (ka kopo, khutsa).
3) Ts'ebetso ea senotlolo sa skrini; boemong ba tekanyo, tobetsa "
” senotlolo, letšoao la "HOLD" le hlaha kaholimo ho skrine ho bontša hore sesebelisoa se notlela skrineng sa hajoale, hape, "” senotlolo sa ho hlakola tshebetso
4) Mosebetsi oa ho rekota; ka mokhoa oa ho metha, tobetsa "
” konopo, 'me u utloe "rotho", e bontšang hore ho rekota ho qala, lokolla "” senotlolo, ’me u utloe melumo e ’meli ea “rotha” le “rotha”, e bontšang qetello ea ho rekota.
5) Mosebetsi oa ho fetola molumo; ka mokhoa oa ho metha, tobetsa "
” ho eketsa molumo le “
” ho fokotsa molumo.
6) Mosebetsi oa ho fetola boleng ba alamo; ka mokhoa oa tekanyo, tobetsa "
"Konopo, sesebelisoa se ka kenya "Yellow Light Alarm Value Adjustment", "Red Light Alarm Value Adjustment", "Green Light Self Test", "Yellow Light Self Test", "Red Light" mode, ebe o tobetsa "” konopo hape ho khutlela mokhoeng oa ho metha.Mokhoeng oa tokiso ea boleng ba alamo, tobetsa “” konopo ho lokisa boleng bo boholo ebe o tobetsa “” senotlolo sa ho lokisa boleng bo bonyenyane.
7) Khetho ea lentsoe ea phatlalatso; ka mokhoa oa ho metha, tobetsa "
” ho khetha puo e hlokahalang ea khaso, ebe u khetha ka Senyesemane, Sepanish, Sefora, Sejeremane, Sejapane, Sechaena, litaba tse rekotiloeng tsa hae.
Tlhokomeliso: Ka mor'a ho tobetsa "” konopo, lentsoe le tla phatlalatsoa. Kamora hore lentsoe le bapaloe, tobetsa "” konopo nakong ea metsotsoana e 3 ho tlolela papaling e latelang ea lentsoe Haeba e feta metsotsoana e 3, bapala lentsoe le khethiloeng.
8）Mokhoa oa ho lokisa; Bula sesebelisoa sa matla sa mohloli o tloaelehileng oa molumo (94 dB @ 1 KHZ), koala mohloli o tloaelehileng ho lesoba la ho kenngoa ha sensor ea lerata, 'me u fetole potentiometer ka lesoba la ho lokisa ka lehlakoreng le letona la sesebelisoa ho bontša LCD e le 94.0dB.
8. Lintlha
Sesebelisoa se lokisitsoe pele se tloha fekthering. Ntle le lisebelisoa life kapa life tsa profeshenale le basebetsi, ka kopo u se ke oa fetola maemo a calibration habonolo
[Tlhokomeliso] Sesebelisoa se lokisitsoe pele se tloha fekthering, 'me nako e khothalletsoang ea tokiso ke selemo se le seng.1) Litokiso kapa litšebeletso li lokela ho etsoa feela ke basebetsi ba tšoanelehang.
2) Hlakola yuniti ka lesela le bonolo le omeletseng. U se ke ua sebelisa li-abrasives kapa solvents sesebelisoa sena
3) Tlosa betri ha mitha e lokela ho bolokoa nako e telele ho qoba ho lutla ha betri.
4) Ha betri e fela, LCD e bonts'a "
”, mme betri e ncha e tlameha ho nkeloa sebaka.
5) Sebelisa li-adapter ho matlafatsa ka hohle kamoo ho ka khonehang
6) U se ke ua e sebelisa libakeng tse nang le mocheso o phahameng le mongobo o phahameng
7) U se ke ua tlanya hlooho ea microphone 'me u lule u omme.
9. Lisebelisoa
1 x PCE-TSM 5 mitha ea boemo ba molumo
1 x 9 V 1 Adapter e kholo ea plug-in
1 x taolo e hole
1 x screwdriver
6 x 1.5 V AA betri
1 x buka ea mosebelisi
1 x thepa ea ho kenya
9. Ho lahla
Bakeng sa ho lahloa ha libeteri ho EU, ho sebetsa taelo ea 2006/66/EC ea Paramente ea Europe. Ka lebaka la lintho tse silafatsang tse teng, libeteri ha lia tlameha ho lahloa e le litšila tsa ka tlung. Li tlameha ho fuoa libaka tsa pokello tse etselitsoeng morero oo.
E le ho latela taelo ea EU 2012/19/EU re khutlisetsa lisebelisoa tsa rona morao. Re ka li sebelisa hape kapa ra li fa k'hamphani e etsang lintho hape e tsamaisang lisebelisoa ho latela molao.
Bakeng sa linaha tse kantle ho EU, libeteri le lisebelisoa li tlameha ho lahloa ho latela melao ea sebaka sa heno ea litšila.
Haeba u na le lipotso, ka kopo ikopanye le PCE Instruments.
Lintlha tsa puisano tsa PCE Instruments
Jeremane
PCE Deutschland GmbH
Ke Langel 26
D-59872 Mechede
Deutschland
Mohala: +49 (0) 2903 976 99 0
Fekse: +49 (0) 2903 976 99 29
info@pce-instruments.com
www.pce-instruments.com/deutsch
united kingdom
PCE Instruments UK Ltd
Ntlo ea Trafford
Chester Rd, Old Trafford
Manchester M32 0RS
united kingdom
Mohala: +44 (0) 161 464902 0
Fax: +44 (0) 161 464902 9
info@pce-instruments.co.uk
www.pce-instruments.com/english
Netherlands
PCE Brookhuis BV
Institutenweg 15
Tlhaloso: 7521 PH
Nederland
Phone: + 31 (0) 53 737 01 92
info@pcebenelux.nl
www.pce-instruments.com/dutch
Fora
PCE Instruments France EURL
23, Rue de Strasbourg
67250 Soultz-Sous-Forets
Fora
Mohala: +33 (0) 972 3537 17
Nomoro ea fax: +33 (0) 972 3537 18
info@pce-france.fr
www.pce-instruments.com/french
Italy
PCE Italia srl
Ka Pesciatina 878 / B-Interno 6
Sebaka sa 55010 Gragnano
Kapannori (Lucca)
Italy
Thelefono: +39 0583 975 114
Fax: +39 0583 974 824
info@pce-italia.it
www.pce-instruments.com/italiano
Amerika
Litlhaloso tsa likarolo tsa PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter / Palm Beach
33458 leq
usa
Mohala: +1 561-320-9162
Fax: +1 561-320-9176
info@pce-americas.com
www.pce-instruments.com/us
Spain
PCE Ibérica SL
Calle Mula, 8
02500 Tobarra (Albacete) España
Mohala : +34 967 543 548
Fax: +34 967 543 542
info@pce-iberica.es
www.pce-instruments.com/espanol
kalakuni
PCE Teknik Cihazları Ltd.Şti.
Halkalı Merkez Mah.
Pehlivan Sok. No.6/C
34303 Küçükçekmece – İstanbul
Türkiye
Mohala: 0212 471 11 47
Fekese: 0212 705 53 93
info@pce-cihazlari.com.tr
www.pce-instruments.com/turkish
Denmark
PCE Lisebelisoa Denmark ApS
Birk Centerpark 40
7400 Herning
Denmark
Mohala: +45 70 30 53 08
kontakt@pce-instruments.com
www.pce-instruments.com/dansk
Litokomane / Lisebelisoa
 |
Lisebelisoa tsa PCE PCE-TSM 5 Sound Level Meter [pdf] Bukana ea Mosebelisi PCE-TSM 5 Sound Level Meter, PCE-TSM 5, Sound Level Meter, Level Meter |
