Lisebelisoa tsa PCE PCE-LCM 50 Maekorosekopo ea Dijithale
PCE-LCM 50 Digital Microscope ke microscope ea ts'ebetso e phahameng e ka sebelisoang lits'ebetsong tse fapaneng. E tla le mefuta e mengata ea likarolo tse etsang hore ho be bonolo ho e sebelisa le ho sebetsa haholo. Ka tlase ke tse ling tsa lintlha tsa bohlokoa tsa microscope:
Litlhaloso tsa Sehlahisoa
- Lense ea Optical
- Lense ea Barlow
- Atometsa mahlo
- Zoom ea dijithale
- Sebaka se tsitsitseng sa ho sebetsa
- Sensor ea setšoantšo
- Ho leka-lekana ho tšoeu
- Qeto ea pontšo
- Sekhahla sa foreimi
- Boholo ba pixel
- Karolelano ea pontšo ho lerata
- Sehokedi
- Adapter ea lisebelisoa tsa motlakase
- Leseli la ketsahalo ea ho bonesa
- Leseli le fetisoa ka leseli
- Maemo a tikoloho
- Litekanyo
- Boima ba 'mele
Sebaka sa Phano ea Sehlahisoa
- microscope ea dijithale PCE-LCM 50
- USB mouse
- Karete ea Micro-SD
- Sekoaelo se sireletsang
- Bapisa disc e ntšo/e tšoeu
- Lense e khanyang
- Adapter ea mantlha
- Filimi e sireletsang
- Bukana ea mosebelisi
Litaelo tsa Tšebeliso ea Sehlahisoa
Ka kopo bala bukana ea mosebelisi ka hloko le ka botlalo pele o sebelisa sesebelisoa lekgetlo la pele. Sesebelisoa se ka sebelisoa feela ke basebetsi ba tšoanelehang le ho lokisoa ke basebetsi ba PCE Instruments. Tšenyo kapa likotsi tse bakoang ke ho se latele bukana ha li kenyellelitsoe boikarabellong ba rona mme ha li koaheloe ke waranti ea rona. Microscope e na le lihokelo tse 'maloa tsa basebelisi. Tsena li ka buloa ka ho tsamaisa mouse ka lehlakoreng le letšehali kapa ka tlase ho skrine. Ka tlase ke litaelo tsa likarolo tsa bohlokoa:
Lebone
Microscope e na le ketsahalo le ts'ebetso ea leseli le fetisitsoeng. Khanya e ka fetoloa ka thoko maemong a 5 a khanya. Ho lokisa khanya, tobetsa konopo ea INC bakeng sa leseli la ketsahalo le TRA bakeng sa leseli le fetisoang. Linotlolo li teng tafoleng ea microscope.
- Tobetsa ho nka setšoantšo. Skrine se hlahisa molaetsa o nang le file lebitso. Keletso: Methalo ea boholo le likarolo tsa ho taka ha li kenyelelitsoe setšoantšong.
- Tobetsa ho qala le ho emisa ho rekota video. Kamora ho qala ho rekota, pontšo ea nako e qala hukung e kaholimo ho le letona la pontšo e bontšang nako ea ho rekota.
- File fedileview E bonts'a setšoantšo le video tse teng files ka lehlakore view. Tsamaiso ka har'a file fedileview e hlalositsoe khaolong ea 6.1.1.
- Lenane la ho taka Lenaneng la ho taka, u tla fumana libopeho le tšebetso ea ho metha setšoantšo, tse hlalositsoeng khaolong ea 6.1.2, le lethathamo la li-calibration, tse hlalositsoeng khaolong ea 6.1.3.
- Ka kopo sheba bukana ea mosebelisi bakeng sa litaelo tse felletseng tsa ho sebelisa e 'ngoe le e 'ngoe ea lits'ebetso tsena.
Lintlha tsa polokeho
Ka kopo bala bukana ena ka hloko le ka botlalo pele u sebelisa sesebelisoa ka lekhetlo la pele. Sesebelisoa se ka sebelisoa feela ke basebetsi ba tšoanelehang le ho lokisoa ke basebetsi ba PCE Instruments. Tšenyo kapa likotsi tse bakoang ke ho se latele bukana ha li kenyellelitsoe boikarabellong ba rona mme ha li koaheloe ke waranti ea rona.
- Sesebelisoa se tlameha ho sebelisoa feela joalokaha ho hlalositsoe bukeng ena ea litaelo. Haeba e sebelisoa ka tsela e 'ngoe, sena se ka baka maemo a kotsi ho mosebelisi le tšenyo ea metara.
- Sesebelisoa se ka sebelisoa feela ha maemo a tikoloho (thempereichara, mongobo o lekanyelitsoeng, ...) a le ka har'a mekhahlelo e boletsoeng ho litlhaloso tsa tekheniki. Se ke oa beha sesebelisoa mochesong o feteletseng, mahlaseling a letsatsi, mongobo o feteletseng kapa mongobo.
- Se ke oa pepesetsa sesebelisoa ho makala kapa ho thothomela ho matla.
- Nyeoe e lokela ho buloa feela ke basebetsi ba tšoanelehang ba PCE Instruments.
- Le ka mohla u se ke ua sebelisa sesebelisoa ha matsoho a hau a le metsi.
- Ha oa tlameha ho etsa liphetoho tsa tekheniki ho sesebelisoa.
- Sesebelisoa se lokela ho hloekisoa feela ka papatsoamp lesela. Sebelisa feela pH-neutral cleaner, ha ho na li-abrasives kapa solvents.
- Sesebelisoa se tlameha ho sebelisoa feela le lisebelisoa tse tsoang ho PCE Instruments kapa tse lekanang le tsona.
- Pele o sebelisoa, hlahloba mokotla bakeng sa tšenyo e bonahalang. Haeba ho na le tšenyo e bonahalang, u se ke ua sebelisa sesebelisoa.
- Se ke oa sebelisa sesebelisoa maemong a leholimo a phatlohang.
- Methati ea litekanyo joalo ka ha ho boletsoe ho lintlha ha ea tlameha ho fetisoa tlas'a maemo afe kapa afe.
- Ho se boloke lintlha tsa polokeho ho ka baka tšenyo ho sesebelisoa le likotsi ho mosebelisi.
- U se ke ua tšoara lilense.
- Ha microscope e sa sebelisoe, sebelisa sekoahelo sa lerole.
- Ha re nke boikarabello bakeng sa liphoso tsa khatiso kapa liphoso tse ling bukeng ena. Re supa ka ho hlaka lipehelo tsa rona tsa tiisetso tse akaretsang tse ka fumanoang ho latela maemo a rona a akaretsang a khoebo.
Sebaka sa thomello
- 1 x microscope ea dijithale PCE-LCM 50
- 1 x mouse ea USB
- 1 x karete ea micro-SD
- 1 x sekoahelo se sireletsang
- 1 x disc ea phapang e ntšo / e tšoeu
- 1 x lense e khanyang
- 1 x adaptara ea mantlha
- 1 x filimi e sireletsang
- 1 x buka ea mosebelisi
Litlhaloso
| Lense ea Optical | 1 … 4 x |
| Lense ea Barlow | 0.3 x |
| Atometsa mahlo | 8.1………… x |
| Zoom ea dijithale | 1 … 10 x |
| Sebaka se tsitsitseng sa ho sebetsa | 90.5 limilimithara |
| Sensor ea setšoantšo | 1/3 ″, 3MP |
| Ho leka-lekana ho tšoeu | ka tsela e iketsang kapa ka ho tobetsa konopo |
| Qeto ea pontšo | 1024 x 600 pixels |
| Sekhahla sa foreimi | 30fps |
| Boholo ba pixel | 2.75 x 2.75µm |
| Karolelano ea pontšo ho lerata | >65db |
| Sehokedi | USB 2.0 |
| Adapter ea lisebelisoa tsa motlakase | ea pele: 100 … 240 V
bobeli: 12 V, 1 A |
| Leseli la ketsahalo ea ho bonesa | selikalikoe se nang le li-LED tsa 21 x 20 mA, tse fetolehang ka mehato e mehlano |
| Leseli le fetisoa ka leseli | 7 x 20 mA LEDs, e ka fetoloang ka mehato e mehlano |
| Maemo a tikoloho | -5 … 40 °C / 23 … 104 °F, 45 … 85 % RH |
| Litekanyo | 300 x 225 x 270 mm / 11.8 x 8.9 x 10.6 ho |
| Boima ba 'mele | hoo e ka bang. 2.3 lik'hilograma / 5.1 lbs |
Tlhaloso ea sesebelisoa
| 1. | 9 ″ pontšo |
| 2. | Slot ea karete ea Micro-SD |
| 3. | Ho bulela/tima switjha bakeng sa pontsho (boemo) |
| 4. | Moetso oa USB 3.0 |
| 5. | Lebili le tsepamisitseng maikutlo |
| 6. | Ho beha lebone |
| 7. | Khokahano bakeng sa phepelo ea motlakase (ka morao) |
| 8. | Hlahisa switjha ya ho tima/e tima |
| 9. | Leseli bakeng sa microscopy ea khanya e fetisoang |
| 10. | Stage |
| 11. | Lesale la LED |
| 12. | Kameho e feto-fetohang |
Lebone
Microscope e na le ketsahalo le ts'ebetso ea leseli le fetisitsoeng. Leseli le ka fetoloa ka thoko maemong a 5 a khanya. Ho lokisa khanya, tobetsa konopo ea "INC" bakeng sa leseli la ketsahalo le "TRA" bakeng sa leseli le fetisoang. Linotlolo li teng tafoleng ea microscope.
Tlhaloso ea li-interfaces tsa basebelisi
Microscope e na le lihokelo tse 'maloa tsa basebelisi. Tsena li ka buloa ka ho tsamaisa mouse ka lehlakoreng le letšehali kapa ka tlase ho skrine.
Sekrine sa lenane le letšehali
Tobetsa ho nka setšoantšo. Skrine se hlahisa molaetsa o nang le file lebitso.
Tlhahiso
- Mela ea litekanyo le likarolo tsa ho taka ha li kenyelelitsoe setšoantšong.
Tobetsa ho qala le ho emisa ho rekota video. Kamora ho qala ho rekota, pontšo ea nako e qala hukung e kaholimo ho le letona la pontšo e bontšang nako ea ho rekota.
File fedileview
- E bonts'a setšoantšo le video tse teng files ka lehlakore view.
- Tsamaiso ka har'a file fedileview e hlalositsoe khaolong ea 6.1.1.
Lenaneo la ho taka
- Lenaneong la ho taka, u tla fumana libopeho le lits'ebetso tsa ho metha setšoantšo, tse hlalositsoeng khaolong ea 6.1.2, le lethathamo la li-calibration, tse hlalositsoeng khaolong ea 6.1.3.
Menu ea li-setting
- Likhetho bakeng sa li-setting tsa setšoantšo le li-setting tse ling tsa sistimi joalo ka li-setting tsa letsatsi le nako.
File fedileview
- The file fedileview e bonts'a litšoantšo le livideo tse rekotiloeng kareteng ea SD.
- U ka fetohela ho tse kholo view ea litšoantšo ka ho tobetsa habeli.
Navigation bar
Konopo ea morao
- Tsoa ho file fedileview kapa e kgolo view.
Konopo ea pele / morao
- Tsamaea ka har'a file fedileview le tse kgolo view.
Hlakola konopo
- Hlakola ntho e hlahang.
- Ho file fedileview, ho kena ho tlameha ho khethoa ka ho tobetsa mouse.
Hlokomela: Litlhaku tse ling li behiloe ho bontša bohole kapa libaka 'me li hlahisoa ho latela tekanyo e bolokiloeng. Tekanyo ea PCE-LCM 50 e hlalositsoe khaolong ea 6.1.3.
Ntlha
- Tobetsa ho beha ntlha sebakeng sa hona joale sa khesara.
Sedikadikwe ho tloha radius
- Khetha sebaka se bohareng ka ho penya, ebe u isa sesupa bohole boo u bo batlang bakeng sa radius.
Etsa selikalikoe ho tsoa ho lintlha tse 2
- Theha lintlha tse 2 tsa litšupiso tse lutseng pheletsong ea selikalikoe se entsoeng.
Etsa selikalikoe ho tsoa ho lintlha tse 3
- Etsa lintlha tse 3 tsa litšupiso. Selika-likoe se bōptjoa e le hore lintlha tsohle tse 3 tsa litšupiso li be teng ho potoloha.
Sebaka pakeng tsa lidikadikwe tse pedi
- Ts'ebetso e lekanya sebaka se pakeng tsa li-circles tse peli tse ka hlahisoang ke likaroloana tse fapaneng.
Lidikadikwe tse tsepameng
- Etsa selikalikoe u sebelisa mosebetsi oa selikalikoe-ho tloha-radius. Mona o ka etsa selikalikoe se le seng kapa ho feta ka ntlha e le 'ngoe e bohareng.
Sebaka pakeng tsa mola le selikalikoe
- Etsa selikalikoe u sebelisa mosebetsi oa selikalikoe-ho tloha-radius. Ebe u khetha lintlha tse 2 ho theha mola o otlolohileng. Sebaka se lekantsoeng "LD-X" se hlalosa sebaka se pakeng tsa mola o otlolohileng le bohareng ba selikalikoe.
Polygon
- Theha polygon ka palo efe kapa efe ea lintlha tsa litšupiso. Ho qeta polygon, tobetsa konopo e nepahetseng ea toeba.
Crosshairs
- Ka ho tobetsa e le 'ngoe, u theha sebaka sa litšupiso se nang le likhokahano.
Rectangle
- E etsa khutlonnetsepa ho tsoa ho litšupiso tse 2.
Mola ho tloha lintlheng tse 'maloa
- E theha mola ho tsoa libakeng tse 'maloa tsa litšupiso.
Arc ho tloha lintlha tse 3
- E theha arc ho tsoa ho litšupiso tse 3.
Mohala oa mahala
- E etsa mola ho tloha metsamaong ea likhesa.
Mola
- E etsa mola ho tsoa ho litšupiso tse 2.
Mehala ea perpendicular
- Taba ea pele, ho entsoe mola.
- Ka mor'a moo, ntlha e 'ngoe ea litšupiso e sebelisoa ho theha mola o lumellanang le mola oa pele.
Mela e bapileng
- Taba ea pele, ho entsoe mola. Ebe, ka ho tobetsa e 'ngoe, u theha sebaka sa pele sa litšupiso bakeng sa mohala o tšoanang.
- Qalo ea sena e lebisitsoe sebakeng sa cursor.
- Ka ho tobetsa e 'ngoe, u ka qeta mola.
Tekanyo ea angle
- Taba ea pele, ho entsoe mola.
- Ebe u theha mola o mong ho tloha qetellong. Ho lekantsoe angle e nyane haholo lipakeng tsa mola o mocha le mola oa mantlha.
Mongolo
- Ho entsoe sebaka sa mongolo. Ka mor'a sena, ho tla hlahisoa keyboard ea sebele ho kenya mongolo. Qetella ho kenya ka ho tobetsa konopo ea "Netefatsa".
Ho romelloa ha maqephe
- Ka ts'ebetso ena, o ka romella litekanyo tse khethiloeng ka bo eona tsa likarolo tsa ho taka joalo ka CSV file. Sena file e bolokoa kareteng ea SD ka nako e lumellanang.
Tweba
- Fetolela ho mouse ho etsa litlhophiso tse ling.
Khetha le ho hlakola
- Sebelisa khetho ho khetha ntho e toroang skrineng ho e hlakola.
Hlakola kaofela
- E hlakola likarolo tsohle tsa ho taka tse skrineng.
Setšoantšo sa skrini
- Mosebetsi ona o boloka setšoantšo ka lintlha tse entsoeng le litšoantšo ho karete ea SD. Litšoantšo tsena ha lia thathamisoa ho file fedileview.
Tekanyetso
- "Eketsa": E etsa calibration e ncha
- "Hlakola": E hlakola litekanyo tse khethiloeng
- "Fetola": Fetola tekanyo
- Ho lokisa yuniti ya lebitso, bolelele le bolelele
Beha ntho e lekantsoeng ka tlas'a microscope, mohlalaample a rula. Bula menu ea ho taka, tobetsa "Add" sebakeng se ka tlaase. Khetha lintlha tse 2 ho beha sebaka skrineng. Ho bula lenane hape, suthela mouse lehlakoreng le letšehali la skrine. Tobetsa ho "Length" 'me u kenye bolelele ba sebele pakeng tsa lintlha tse peli. Ho phethela tlhophiso, tobetsa "Ho lokile".
- Hlokomela hore tekanyo e nepahetse bakeng sa sepheo se itseng feela.
- Haeba tsepamiso e fetoha, ho hlokahala hore ho be le tekanyo e ncha.
Litlhophiso tsa khanya
Ho itlhahisa ka boiketsetso
- E fetola ponahalo haeba setšoantšo se hlahisoang se pepesitsoe ho feta tekano kapa se sa pepesehe hantle.
Seta bocha
- E seta bocha li-setting tsa lebone.
Khanya ea sepheo
- Seta bakeng sa ho iponahatsa.
Kgahlamelo
- E laola leseli le tsoang lesale la LED.
Ho leka-lekana ho tšoeu
Khubedu
Botala
Boputsoa
- E hlalosa karolo e khubelu / e tala / e putsoa ea setšoantšo.
- E ka feto-fetoha ho lokisa mebala.
Mocheso oa 'mala
- E fetola likarolo tse khubelu, tse tala le tse putsoa ho etsa "bata" kapa "mofuthu" oa 'mala.
Antiflicker
- E loantšana le litlamorao tse panyang ea mehloli ea mabone a motlakase.
Bapisa
- E beha phapang ho khanya ha leseli le likarolo tse lefifi tsa setšoantšo.
Phatlalatso
- E u lumella ho etsa tlhahiso e mebala-bala.
Khanya
- Tokiso ea khanya e hlahisoang ke selikalikoe sa LED.
bohale
- E laola phapang ea lintlha le hore na li fapane hakae ho tse ling.
Khatello ea lerata
- Ho seta ho qoba ho kena-kenana le matšoao phetisong ea video.
Puo
- Lipuo tse teng: Senyesemane / Sejeremane / Sefora / Sechaena / Sekorea
- Tlhophiso ea letsatsi
- Ho beha nako
- Khetho ea polokelo
- E khetha sebaka sa polokelo bakeng sa e ncha files mme e fana ka khetho ea ho fomata media oa data (karete e kenyellelitsoeng ea Micro-SD kapa drive ea pene ea USB).
- Phetolelo
Menu ka tlase
Atometsa
- E holisa setšoantšo ka ntlha ea 0.1, ho fihla ho boholo ba 10.
Atolosa
- E fokotsa setšoantšo ka karolo ea 0.1. Boholo ba setšoantšo ha bo khone ho ba nyane ho feta 1.
Seipone se otlolohileng
- E etsa liipone tsa setšoantšo holim'a axis e emeng.
Seipone se rapameng
- E etsa liipone tsa setšoantšo holim'a axis e tšekaletseng.
Ho tlala kapele
- E lokisa boemo ba menu ea li-setting.
HDR
- Mosebetsi wa ho lefella meriti kapa kgahlamelo e feteletseng.
Qhatsela
- E homisa setšoantšo.
Likhetho tsa grid
- Litlhophiso tsa ho bonts'a kapa ho pata li-scale bar / grid.
Likhetho tsa line
- Bapisa le setšoantšo se bolokiloeng
- E bula file fedileview, e bonts'a setšoantšo se khethiloeng ka lehlakoreng le letona la skrine.
Setšoantšo sa k'hamera ea kotara
- Kotara ea hajoale view.
Tlhokomeliso: Tekanyetso ha e na sekhahla. U tlameha ho fetola tekanyo ea hau haeba u sebetsa ka litekanyo.
Ho batle phoso
| Phoso | Lebaka | Tharollo |
| Tšimo ea pono e litšila | sample silafalitsoe | Hloekisa sample. |
| Lilense li silafetse. | Hloekisa lilense. | |
| Ha ho setšoantšo se hlakileng | Lilense li silafetse. | Hloekisa lilense. |
| Leseli ha le sebetse ha phepelo voltage hokahane | Ha ho phepelo ea motlakase | Sheba adaptara ea mantlha. |
| Ho khantša ho fosahetse | Ikopanye le PCE Instruments. | |
| Setšoantšo se lefifi | Setting ea khanya e tlase haholo | Eketsa boemo ba ho khanya. |
| White balance ha e sebetse hantle | Fetola tekanyo e tšoeu ka letsoho. | |
| Sebaka se pakeng tsa pontšo le microscope
e kgolo |
Fetola angle. | |
| Ha ho setšoantšo skrineng | Ha ho phepelo ea motlakase | Lekola adaptara ea mantlha le khokahano
mokhoa. |
| Swichi ya skrine e timilwe | Fetola ponts'o u sebelisa switch switch. |
Ikopanye
Haeba u na le lipotso, litlhahiso kapa mathata a tekheniki, ka kopo u se ke oa qeaqea ho ikopanya le rona. U tla fumana lintlha tse amanang le mabitso qetellong ea bukana ena ea mosebelisi.
Ho lahla
Bakeng sa ho lahloa ha libeteri ho EU, ho sebetsa taelo ea 2006/66/EC ea Paramente ea Europe. Ka lebaka la lintho tse silafatsang tse teng, libeteri ha lia tlameha ho lahloa e le litšila tsa ka tlung. Li tlameha ho fuoa libaka tsa pokello tse etselitsoeng morero oo. E le ho latela taelo ea EU 2012/19/EU re khutlisetsa lisebelisoa tsa rona morao. Re ka li sebelisa hape kapa ra li fa k'hamphani e etsang lintho hape e tsamaisang lisebelisoa ho latela molao. Bakeng sa linaha tse kantle ho EU, libeteri le lisebelisoa li tlameha ho lahloa ho latela melao ea sebaka sa heno ea litšila. Haeba u na le lipotso, ka kopo ikopanye le PCE Instruments.
Lintlha tsa puisano tsa PCE Instruments
Jeremane
- PCE Deutschland GmbH
- Im Langel 26 D-59872 Meschede Deutschland
- Mohala: +49 (0) 2903 976 99 0
- Fax: +49 (0) 2903 976 99 29
- info@pce-instruments.com
- www.pce-instruments.com/deutsch
united kingdom
- PCE Instruments UK Ltd
- Unit 11 Southpoint Business Park Ensign Way, Boroaamptona Hampshire United Kingdom, SO31 4RF
- Mohala: +44 (0) 2380 98703 0
- Fax: +44 (0) 2380 98703 9
- info@pce-instruments.co.uk
- www.pce-instruments.com/english
Netherlands
- PCE Brookhuis BV
- Institutenweg 15 7521 PH EnschedeNederland
- Mohala: +31 (0)53 737 01 92
- info@pcebenelux.nl
- www.pce-instruments.com/dutch
Italy
- PCE Italia srl
- Via Pesciatina 878 / B-Interno 6 55010 Loc. Gragnano Capannori (Lucca) Italia
- Telefono: +39 0583 975 114
- Fax: +39 0583 974 824
- info@pce-italia.it
- www.pce-instruments.com/italiano
Amerika
- Litlhaloso tsa likarolo tsa PCE Americas Inc.
- 1201 Jupiter Park Drive, Suite 8 Jupiter / Palm Beach 33458 FL USA
- Mohala: +1 561-320-9162
- Fax: +1 561-320-9176
- info@pce-americas.com
- www.pce-instruments.com/us
Spain
- PCE lbérica SL
- Calle Mayor, 53 02500 Tobarra (Albacete) España
- Mohala: +34 967 543 548
- Fax: +34 967 543 542
- info@pce-iberica.es
- www.pce-instruments.com/espanol
Denmark
- PCE Lisebelisoa Denmark ApS
- Birk Centerpark 40 7400 Herning Denmark
© PCE Lisebelisoa
Litokomane / Lisebelisoa
 |
Lisebelisoa tsa PCE PCE-LCM 50 Maekorosekopo ea Dijithale [pdf] Bukana ea Mosebelisi PCE-LCM 50, PCE-LCM 50 Maekorosekopo ea Dijithale, Maekorosekopo ea Dijithale, Maekorosekopo |
