Lisebelisoa tsa PCE PCE-AM 45 Anemometer
Lintlha tsa polokeho
- Ka kopo bala bukana ena ka hloko le ka botlalo pele u sebelisa sesebelisoa ka lekhetlo la pele. Sesebelisoa se ka sebelisoa feela ke basebetsi ba tšoanelehang le ho lokisoa ke basebetsi ba PCE Instruments. Tšenyo kapa likotsi tse bakoang ke ho se latele bukana ha li kenyellelitsoe boikarabellong ba rona mme ha li koaheloe ke waranti ea rona.
- Sesebelisoa se tlameha ho sebelisoa feela joalokaha ho hlalositsoe bukeng ena ea litaelo. Haeba e sebelisoa ka tsela e 'ngoe, sena se ka baka maemo a kotsi ho mosebelisi le tšenyo ea metara.
- Sesebelisoa se ka sebelisoa ha feela maemo a tikoloho (thempereichara, mongobo o lekanyelitsoeng, ...) a le ka har'a mekhahlelo e boletsoeng ho litlhaloso tsa tekheniki. Se ke oa beha sesebelisoa mochesong o feteletseng, mahlaseling a letsatsi, mongobo o feteletseng kapa mongobo.
- Se ke oa pepesetsa sesebelisoa ho makala kapa ho thothomela ho matla.
- Nyeoe e lokela ho buloa feela ke basebetsi ba tšoanelehang ba PCE Instruments.
- Le ka mohla u se ke ua sebelisa sesebelisoa ha matsoho a hau a le metsi.
- Ha oa tlameha ho etsa liphetoho tsa tekheniki ho sesebelisoa.
- Sesebelisoa se lokela ho hloekisoa feela ka papatsoamp lesela. Sebelisa feela pH-neutral cleaner, ha ho na li-abrasives kapa solvents.
- Sesebelisoa se tlameha ho sebelisoa feela le lisebelisoa tse tsoang ho PCE Instruments kapa tse lekanang le tsona.
- Pele o sebelisoa, hlahloba mokotla bakeng sa tšenyo e bonahalang. Haeba ho na le tšenyo e bonahalang, u se ke ua sebelisa sesebelisoa.
- Se ke oa sebelisa sesebelisoa maemong a leholimo a phatlohang.
- Methati ea litekanyo joalo ka ha ho boletsoe ho lintlha ha ea tlameha ho fetisoa tlas'a maemo afe kapa afe.
- Ho se boloke lintlha tsa polokeho ho ka baka tšenyo ho sesebelisoa le likotsi ho mosebelisi.Ha re nke boikarabello bakeng sa liphoso tsa khatiso kapa liphoso tse ling bukeng ena.
- Re supa ka ho hlaka lipehelo tsa rona tsa tiisetso tse akaretsang tse ka fumanoang ho latela maemo a rona a kakaretso a khoebo.
- Haeba u na le lipotso ka kopo ikopanye le PCE Instruments. Lintlha tsa ho ikopanya li ka fumanoa qetellong ea bukana ena.
Litlhaloso
| Yuniti | Lekhalo la litekanyo | Qeto | Ho nepahala |
| Lebelo la moya | |||
| Mof | 0.3…. 45.0 m/s | 0.01 m/s | ±3 % ±0.1 m/s ea ho bala |
| ft/mets | 60 … 8800 ft/min | 0.01, 0.1, 1 ft/min | ±3 % ±20 ft/min ya ho bala |
| mafito | 0.6…. 88.0 likotoana | 0.01 likotoana | ±3 % ±0.2 mafito a ho bala |
| km/h | 1.0…. 140.0 km/h | 0.01 km/h | ±3 % ±0.4 km/h ya ho bala |
| mph | 0.7 … 100 mph | 0.01 mph | ±3 % ±0.2 mph ea ho bala |
| Tsela ya moya | |||
| 0 … 360 ° | 1 ° | ||
| Phallo ea molumo | |||
| CMM (m³ / mets) | 0 … 999900 m³/min | 0.001 … 100 m³/min | |
| CFM (FT³/mots) | 0 … 999900 ft³/min | 0.001 … 100 m³/min | |
| Tekanyo ea mocheso | |||
| °C | 0 … 45 °C | 0.1 °C | ±1.0 °C |
| °F | 32 … 113 °F | 0.18 °F | ±1.8 °F |
| Tekanyo ea mongobo | |||
| % RH | 10 … 90 % RH | 0.1% RH | ± 5% RH |
| Litlhaloso tse ling | |||
| Bolelele ba lipatlisiso | 270 … 540 mm / 10.63 … 21.26“, telescopic | ||
| Aperture ea probe | Ø65 limilimithara / 2.5″ | ||
| Sehokedi | Micro USB | ||
| Memori ya data | 960 litekanyetso tse lekantsoeng | ||
| Phepelo ea motlakase | 4 x 1.5 V AAA betri | ||
| Tšebeliso ea matla | 15 … 20 mA ntle le lebone la morao
20 … 25 mA e nang le lebone la morao 0 … 8 µA standby |
||
| Sesebelisoa sa betri e bataletseng | <4.5 V | ||
| Maemo a ts'ebetso | 0 … 50 °C / 32 … 122 °F, 40 … 80 % RH,
e sa koaheleng |
||
| Maemo a polokelo | -20 … 60 °C / -4 … 140 °F, <80 % RH,
e sa koaheleng |
||
| Litekanyo | 70 x 194 x 35 mm / 2.7 x 7.6 x 1.3 ″ | ||
| Boima ba 'mele | 400 g / 14.1 oz | ||
Sebaka sa thomello
- 1 x anemometer e tšoaroang ka letsoho PCE-AM 45
- 1 x thapo e nyane ea USB
- 1 x mokotla o jereng
- 4 x 1.5 V AAA betri
- 1 x buka ea mosebelisi
Tlhaloso ea sesebelisoa 
| Che. | Tlhaloso | |||
| 1 | Shift key between:
MAX: boleng bo lekantsoeng ka ho fetisisa AVG: karolelano ea boleng bo lekantsoeng MIN: boleng bo lekantsoeng bo tlase Nomoro ea keypad: 1 |
|||
| 2 | Kenya konopo (ENTER) 2/3 V Max konopo
Senotlolo sa ho lekanya tsela ya moya Nomoro ea keypad: 2 |
|||
| 3 | Emisa pontšo (HOLD)
Nomoro ea keypad: 3 |
|||
| 4 | Khetha pakeng tsa lebelo la moea le phallo ea molumo
Nomoro ea keypad: 4 |
|||
| 5 | Konopo ea "unit shift" (UNIT) (tobetsa e khuts'oane)
Ho bulela le ho tima molumo oa konopo (tobetsa nako e telele) Nomoro ea keypad: 5 |
|||
| 6 | Ho tima/tima switjha (tobetsa nako e telele)
Nomoro ea keypad: 6 |
|||
| 7 | Ho beha yuniti ea mocheso (mohatla o mokhuts'oane)
Khetha pakeng tsa pontšo ea mocheso le mongobo (tobetsa nako e telele) Nomoro ea keypad: 7 |
|||
| 8 | Ho beha sebaka sa molumo
Ho beha nako ea polokelo (SAMPLE) Nomoro ea keypad: 8 |
phalla | tekanyo | (SEAMO) |
| 9 | Ho bula menu ea memori (bala, boloka, rekota)
Nomoro ea keypad: 9 |
|||
| 10 | Boloka boleng bo lekantsoeng
Ho bula lenane la ho rekota Nomoro ea keypad: 0 |
|||
| 11 | Khopotso e hlakileng
Nomoro ea letlapa la linotlolo: |
|||
| 12 | Sehokelo sa USB bakeng sa phetiso ea data | |||
| 13 | LC bontshiweng | |||
| 14 | Khokahano bakeng sa sensor ea phallo | |||
| 15 | Khokahano ea cable ea sensor ea phallo | |||
| 16 | Sebono sa sensor ea phallo | |||
| 17 | Letsoho la telescopic la sensor ea phallo | |||
| 18 | Sensor ea phallo | |||
Hlahisa tlhaloso
| Che. | Tlhaloso |
| 1 | 2/3 ea boholo ba pontšo bakeng sa tekanyo ea phallo ea molumo |
| 2 | Pontšo ea boleng bo holimo bo lekantsoeng |
| 3 | Pontšo ea palo e tloaelehileng ea ho bala |
| 4 | Pontšo ea boleng bo lekantsoeng bo tlase |
| 5 | Pontšo ea boleng bo lekantsoeng bo bolokiloeng |
| 6 | Boleng bo lekantsoeng bo bolokiloe |
| 7 | Ho hloekisa mohopolo |
| 8 | Khokahano ea data le PC e se e thehiloe |
| 9 | Matla a betritage tlase haholo |
| 10 | Boleng bo lekantsoeng bo hoamisitsoe |
| 11 | Sekala sa Beaufort |
| 12 | Diyuniti bakeng sa pontsho ya lebelo |
| 13 | Ha e bonts'oa, boleng ba phallo bo bontšoa |
| 14 | Boleng bo lekantsoeng bo tlameha ho atolosoa ka 100 |
| 15 | Ha e bonts'oa, molumo oa molumo o tla bontšoa |
| 16 | Boleng bo lekantsoeng |
| 17 | Yuniti: CFM (FT³/min) |
| 18 | Yuniti: CMM (m³/min) |
| 19 | Pontsho bakeng sa mocheso, sebaka le mohopolo |
| 20 | Yuniti |
| 21 | Pontšo ea angle |
| 22 | Yuniti: mongobo o lekanyelitsoeng |
| 23 | Tataiso ea sesupa-tsela
E: Botjhabela W: Bophirima S: Borwa N: Leboya ES: Boroa-bochabela EN: Leboya-bochabela WS: Boroa-bophirimela WN: Leboya-bophirimela |
| 24 | Pontšo ea hore ha ho na data e bolokiloeng |
Dikonopo tsa dinomoro
Ho ka etsahala hore palo e tlameha ho kenngoa; bakeng sa mohlalaample, ha o kenya karohano ya memori. Ho kenya ts'ebetso ena, senotlolo ka seng se fetola mosebetsi oa sona ho senotlolo se itseng sa linomoro. Lisele tse 'nè li tlameha ho phethoa ka linako tsohle bakeng sa keno e' ngoe le e 'ngoe. Senotlolo sa comma se boetse se fumaneha bakeng sa tekanyo ea phallo ea molumo.
Ho bulela le ho tima mithara
Ho bulela le ho tima mithara, tobetsa o hatelle konopo ya ho bulela/ho tima bonyane metsotswana e mmedi.
Motlakase o tima
Haeba ho sa kenoe ka mor'a metsotso e mehlano ka mor'a ho bulela, meter e ea itima. Ho tima tshebetso ena, tshwara konopo ya Enter ha o bulela ebe o bulela mithara. Pontšo e bontša "che". Ts'ebetso ea ho tima motlakase ka boiketsetso e se e koetsoe. Joale lokolla linotlolo tsohle ho etsa tekanyo. Mochine o timang motlakase oa othomathike o sebetsa hape neng kapa neng ha mitha e tingoa.
Ho etsa tekanyo 
Ho etsa tekanyo, ikamahanya le sensor ea phallo le tataiso ea phallo. Motsu o ka hare ho sensor o bonts'a mokhoa o amanang le phallo ea moea. Emela bonyane metsotsoana e 'meli hore 'malo o tsitse.
Sekala sa Beaufort
Sekala sa Beaufort se dula se sebetsa mme se bontsha sehlopha sa ha jwale sa matla a moya
| Matla a moya | Khethollo ea matla a moea | Tlhaloso ea boemo ba leoatle (sea sa moea) |
| 0 | Khutsa | Leoatle le khutsitseng ka ho feletseng, le boreleli |
| 1 | Moea o khanyang | Leoatle le khutsitseng, le loebehlanang |
| 2 | Moya o kganyang | Leoatle le loebehlanang hanyenyane |
| 3 | Moya o monate | Leoatle le loebehlanang hanyenyane |
| 4 | Moya o itekanetseng | Leoatle le ferekaneng hanyane |
| 5 | Moya o monate | Leoatle le loebehlanang |
| 6 | Moya o matla | Leoatle le makukuno |
| 7 | Haufi le gale | Leoatle le befileng haholo |
| 8 | Gale | Maoatle a phahameng a itekanetseng |
| 9 | Khale e matla | Maoatle a phahameng |
| 10 | Sefefo | Maoatle a phahameng haholo |
| 11 | Sefefo se matla | Leoatle le boima |
| 12 | Leholiotsoana | Leoatle le boima bo ikhethang |
Ho beha yuniti ea phallo
- Ho seta yuniti ea lebelo la phallo, tobetsa konopo ea "UNIT". U ka khetha pakeng tsa m/s, km/h, ft/min, mafito le mps. Setting ea kamehla ke m/s.
Ho beha yuniti ea mocheso
- Ho seta yuniti ya themphereitjhara e hlahang, tobetsa o lokolle “°C/°F” hang. O ka khetha pakeng tsa °C le °F. Tlhophiso ea kamehla ke °C.
Tekanyo ea phallo ea molumo
- Bakeng sa tekanyo ea phallo ea molumo, tobetsa pele konopo ea "VEL/FLOW" ho khetha pakeng tsa lebelo le tekanyo ea phallo ea molumo. Sena se bontšoa ke "VEL" (tekanyo ea lebelo) le "FLOW" (tekanyo ea phallo ea molumo) skrineng.
- Ho itšetlehile ka sebaka se kentsoeng le phallo ea moea e lekantsoeng, boleng bo lekantsoeng le bona bo ka ba holimo haholo ho feta kamoo ho ka khonehang ho bonts'a. Tabeng ena, "x100" kapa "x10" e bontšoa haufi le boleng bo lekantsoeng. Theko e lekantsoeng ponts'ong e tlameha ho atolosoa ka 100 kapa 10 ho latela.
Ho beha yuniti ea tekanyo ea phallo ea molumo
- Ho khetha yuniti FT³ kapa m³, tobetsa le ho lokolla konopo ea "UNIT" hang.
Tlhahiso:
- Mosebetsi o boetse o na le phello ho tlhaloso ea sebaka.
Tlhaloso ea sebaka bakeng sa tekanyo ea phallo ea molumo
- E le ho etsa tekanyo ea phallo ea molumo, hoa hlokahala ho etsa tekanyo ea sebaka sa phallo. Ho etsa sena, tobetsa konopo "AREA/SAMPLE" senotlolo ka mokhoa oa phallo ea molumo. Joale kena sebakeng seo. Yuniti ya tekanyo m2 kapa FT2 e benya pela pontsho. Beha tekanyo e tsamaellanang le eona pele o kena sebakeng.
- Nakong ea tekanyo ea phallo ea molumo, hoa khoneha ho bonts'a 2/3 ea phallo e phahameng ea molumo. Ho etsa sena, tobetsa konopo ea "ENTER". 2/3 MAX” e hlaha skrineng. Ke 2/3 feela ea boleng bo phahameng bo lekantsoeng bo tla hlahisoa. Tobetsa konopo ea "ENTER" hape ho tsoa mocheng.
Boleng bo lekantsoeng bo tlase, bo holimo, le bo mahareng
Bakeng sa tekanyo ea lebelo le phallo ea molumo, boleng bo tlaase ka ho fetisisa / bo phahameng ka ho fetisisa le bo tloaelehileng bo lekantsoeng bo ka bontšoa ka ho tobetsa konopo. Ho sebelisa lits'ebetso tsena, tobetsa konopo ea "MAX/MIN" khafetsa ho fihlela u fihletse tšebetso eo u e batlang.
Boleng bo phahameng ka ho fetisisa bo lekantsoeng
Ha o bonts'a boleng bo lekantsoeng ka ho fetesisa, ho bonts'oa feela boleng bo lekantsoeng ka mor'a ho kenya tšebetsong tšebetso ena. Ha "MAX" e hlahisoa, ts'ebetso ena e ea sebetsa. Ha ts'ebetso e fetoloa, boleng bo fela. 
Karolelano ea ho bala
Ha palohare ea ho bala e bonts'itsoe, karolelano ea metsotsoana e 10 ea ho qetela e ea hlahisoa. Ha "AVG" e hlahisoa, ts'ebetso ena e tla sebetsa. Ha ts'ebetso e fetoloa, boleng bo fela.
Theko e lekantsoeng ka tlase
Ha boleng bo lekantsoeng bo tlase bo bonts'oa, ke boleng bo lekantsoeng bo tlase feela bo bonts'itsoeng. Ha "MIN" e hlahisoa, ts'ebetso ena e ea sebetsa. Ha ts'ebetso e fetoloa, boleng bo fela. 
Tsela ya moya
- Bakeng sa tekanyo ea tataiso ea moea, ho na le gyroscope e eketsehileng ka har'a sensor ea lebelo la moea.
- Tsela ea moea e ka khethoa ka sensor ena. Ho etsa sena, tšoara sensor ka kotloloho ho phallo ea moea.
- Ela hloko ho tšoaea ka hare ho sensor bakeng sa tataiso ea phallo.
- Pontšo e bonts'a degree ea hajoale ea angle le tataiso ea compass joalo ka litlhaku:
- E: Bochabela
- W: Bophirimela
- S: Boroa
- N: Leboya
- ES: Boroa-bochabela
- EN: Leboya-bochabela
- WS: Boroa-bophirimela
- WN: Leboya-bophirimela
Ho lekanya tsela ya moya
Tsela ea moea e lokela ho lekanyetsoa ha mitha e qala ho sebetsa, ha e le sebakeng se fapaneng le ka linako tse tloaelehileng. Ho etsa sena, fetola meter ebe o hokahanya sensor ka kotloloho. Joale tobetsa 'me u tšoare konopo ea "ENTER" ho fihlela sesupo sa tataiso ea moea se benya "- -". Joale potoloha sensor ka kotloloho ho potoloha axis ea eona habeli bakeng sa metsotsoana e 8 e ngoe le e ngoe. Ebe o tobetsa konopo ea "Enter". Tekanyo e phethiloe. 
Ho hoamisa boleng bo lekantsoeng
Ho hatsetsa le ho ts'oara 'malo o bonts'itsoeng hajoale, tobetsa le ho lokolla konopo ea "HOLD" hang. Ho baloa hona joale. HOLD” e hlaha skrineng. Tobetsa konopo ea "HOLD" hape ho qala tekanyo hape. 
Ho rekota litekanyetso tse lekantsoeng
- Ho rekota litekanyetso tse lekantsoeng tsa motho ka mong, nako ea polokelo e tlameha ho beoa ho "0000" metsotsoana. Nako ea polokelo e ka beoa feela ha tšebetso ea ho metha lebelo la moea VEL” e setiloe. Ho etsa sena, tobetsa konopo "SAMPLE" konopo 'me joale u behe nako ea polokelo ka nepo. Ebe o tobetsa konopo ea "REC" neng kapa neng ha u batla ho boloka boleng bo lekantsoeng hajoale. Sebaka sa memori se sebelisitsoeng se bonts'oa ponts'o e tlase mme ponts'o ea "REC" e benya hang kaholimo ho ponts'o.
- Bakeng sa ho rekota khafetsa, seta nako eo u e batlang ea polokelo ka "SAMPLE” senotlolo. O ka khetha pakeng tsa 1 … 9999 metsotsoana. Ebe o tobetsa konopo ea "REC" hang. Pontšo e ka tlase e bonts'a ka bokhutšoanyane nako ea polokelo. REC" e bonts'oa kaholimo ho ponts'o. Sena se bontša hore litekanyetso tse lekantsoeng lia tlalehoa.
- Ho sitisa ho boloka, boloka konopo ea "REC" e tobetse.
- Haeba o tobetsa konopo ea "REC" hape, ho rekota ho tla qala hape.
- Letsatsi le nako li bolokoa feela ha u rekota ka software.
Bala memori ea data
Ho bala memori ea data ho meter, tobetsa ebe o lokolla konopo ea "BALA" hang. "BALA" joale e bonts'oa kaholimo ho ponts'o. Lipalo tsohle tse bonts'itsoeng joale ke tse tsoang mohopolong. Nako le nako ha o tobetsa konopo ea "BALA", boleng bo latelang ba memori bo tla hlaha. Joale tobetsa konopo ea "AREA/SAMPLE" konopo ebe u thaepa sebakeng sa memori seo u batlang ho se bala. Ho khutlela mokhoeng o tloaelehileng oa ho metha, boloka konopo ea "READ" ho fihlela "READ" e nyamela skrineng.
Hlakola data
Metara e na le mohopolo o nang le lintlha tse 960 tse methang. Hang ha memori e tletse, "FULL" e bontšoa skrineng.
Ho hlakola lintlha tsa litekanyo mithareng, tobetsa 'me u tšoare konopo ea "DEL" bonyane metsotsoana e 'meli ho fihlela "CLA" e hlaha 'me "DEL" e khantša. Lintlha tsohle tse bolokiloeng li se li hlakotsoe.
Tlhahiso:
Ke mohopolo oohle feela o ka hlakoloang.
Software
Ho kenya software, qala ka ho ea leqepheng: https://www.pce-instruments.com/english/download-win_4.htm
moo o ka khoasolla le ho kenya software ea morao-rao. Ebe o kopanya meter ho PC mme o bula software ka litokelo tsa motsamaisi. Hang ha mitha e hokahane le PC, ts'ebetso ea ho tima motlakase oa othomathike ea tima.
| Konopo | Mosebetsi |
| “Lekanya Nako ea Sebele | Phela view ea tekanyo |
| "Store Storage" | Ho bala mohopolo oa metara.
Fesetere bakeng sa viewHo bala ho bolokoa metara ho na le sebopeho se ts'oanang. |
| "Hlakola polokelo" | Ho hlakola mohopolo oa metara.
Hang ha o tobetsa konopo ena, litekanyetso tsohle tse lekantsoeng li hlakoloa hang-hang. Ha ho na tlhokomeliso esale pele. |
Lintlha tse romelloang kantle li bolokiloe ka sebopeho sa XLS. Sena se ka shebahala tjena, mohlalaampLe:
Ka mor'a hore u khethe "Real Time Measure", fensetere e ncha e bula bakeng sa tekanyo e phelang ho PC. Ho tloha mona, data ea tekanyo e fetisetsoa ka ho toba ho PC. 
Ho seta nako ea ho bala, tobetsa ho "Khetho" ebe u khetha "Read interval(sec)". Fesetereng e latelang, o ka seta nako ka metsotsoana. 
Ka tlas'a fensetere, u ka bona hore na meter e hokahane. Ho phaella moo, fensetere ea hona joale e ka hatisoa. Khatiso peleview e ka qalisoa pele e hatisoa. Ho boetse ho na le sebaka sa boemo ba boemo ba hajoale ba ho reka kantle ho naha file. 
Ikopanye
Haeba u na le lipotso, litlhahiso kapa mathata a tekheniki, ka kopo u se ke oa qeaqea ho ikopanya le rona. U tla fumana lintlha tse amanang le mabitso qetellong ea bukana ena ea mosebelisi.
Ho lahla
- Bakeng sa ho lahloa ha libeteri ho EU, ho sebetsa taelo ea 2006/66/EC ea Paramente ea Europe. Ka lebaka la lintho tse silafatsang tse teng, libeteri ha lia tlameha ho lahloa e le litšila tsa ka tlung. Li tlameha ho fuoa libaka tsa pokello tse etselitsoeng morero oo.
- E le ho latela taelo ea EU 2012/19/EU re khutlisetsa lisebelisoa tsa rona morao. Re ka li sebelisa hape kapa ra li fa k'hamphani e etsang lintho hape e lahlang lisebelisoa ho latela molao.
- Bakeng sa linaha tse kantle ho EU, libeteri le lisebelisoa li tlameha ho lahloa ho latela melao ea sebaka sa heno ea litšila.
- Haeba u na le lipotso, ka kopo ikopanye le PCE Instruments.
Lintlha tsa puisano tsa PCE Instruments
Jeremane
- PCE Deutschland GmbH
- Ke Langel 26
- D-59872 Mechede
Deutschland
- Mohala: +49 (0) 2903 976 99 0
- Fekse: +49 (0) 2903 976 99 29 info@pce-instruments.com
- www.pce-instruments.com/deutsch
united kingdom
- PCE Instruments UK Ltd
- Unit 11 Southpoint Business Park Ensign Way, Boroaamptona Hampshirele
- United Kingdom, SO31 4RF
- Mohala: +44 (0) 2380 98703 0
- Fax: +44 (0) 2380 98703 9
- info@pce-instruments.co.uk
- www.pce-instruments.com/english
- Netherlands
- PCE Brookhuis BV Institutenweg 15
- Tlhaloso: 7521 PH
- Nederland
- Phone: + 31 (0) 53 737 01 92
- info@pcebenelux.nl
- www.pce-instruments.com/dutch
- Fora
- PCE Instruments France EURL
- 23, Rue de Strasbourg
- 67250 Soultz-Sous-Forets
- Fora
- Mohala: +33 (0) 972 3537 17 Numéro ea fax: +33 (0) 972 3537 18
- info@pce-france.fr
- www.pce-instruments.com/french
- Italy
- PCE Italia srl
- Via Pesciatina 878 / B-Interno 6 55010 Loc. Gragnano
- Kapannori (Lucca)
Italy
- Thelefono: +39 0583 975 114
- Fax: +39 0583 974 824
- info@pce-italia.it
- www.pce-instruments.com/italiano
- Amerika
- Litlhaloso tsa likarolo tsa PCE Americas Inc.
- 1201 Jupiter Park Drive, Suite 8 Jupiter / Palm Beach
- 33458 leq
- usa
- Mohala: +1 561-320-9162
- Fax: +1 561-320-9176
- info@pce-americas.com
- www.pce-instruments.com/us
Spain
- PCE Ibérica SL
- Calle Mayor, 53
- 02500 Tobarra (Albacete) España
- Mohala : +34 967 543 548
- Fax: +34 967 543 542
- info@pce-iberica.es
- www.pce-instruments.com/espanol
kalakuni
- PCE Teknik Cihazları Ltd.Şti. Halkalı Merkez Mah.
- Pehlivan Sok. No.6/C
- 34303 Küçükçekmece – İstanbul Türkiye
- Mohala: 0212 471 11 47
- Fekese: 0212 705 53 93
- info@pce-cihazlari.com.tr
- www.pce-instruments.com/turkish
Litokomane / Lisebelisoa
 |
Lisebelisoa tsa PCE PCE-AM 45 Anemometer [pdf] Bukana ea Mosebelisi PCE-AM 45, PCE-AM 45 Anemometer, Anemometer |
 |
Lisebelisoa tsa PCE PCE-AM 45 Anemometer [pdf] Bukana ea Mosebelisi PCE-AM 45 Anemometer, PCE-AM 45, Anemometer |
