OS ENGINE OCA-3100HV ESC Programmer
LITS'ELISO
OCP-3 ke moqapi oa li-ESC tse lumellanang tse thathamisitsoeng ka holimo bakeng sa li-motor tse se nang brush. Ka ho sebelisa ESC Programmer OCP-3 ea boikhethelo, Litlhophiso tsa ESC li ka hlophisoa kapele le ka mokhoa o sireletsehileng ho fihlela litlhoko tse ikhethileng tsa mohlala.
- Tsamaiso ea 'musisi ea ESC ena ha e lumellane le melao ea FAI F3A.
Thibela tšebetso ha u nka karolo litlholisanong tse ipapisitseng le melaoana ea FIA F3A.
| BOHLOKOA: Pele u leka ho sebelisa OCP-3 ea hau, etsa bonnete ba hore u bala bukana ena ea litaelo. |
|
||
|
⚠ |
TEMOSO | |
 |
Le ka mohla u se ke ua tšoara kapa ua lumella karolo leha e le efe ea 'mele hore e kopane le karolo leha e le efe e potolohang ha u ntse u sebetsa.
|
|
|
Etsa bonnete ba hore u hlahloba ESC le metsamao eohle ea litsamaiso tsa mohlala pele u leka ho fofa.
|
|
|
⚠ |
HLOKOMELA | |
 |
U se ke ua qhaqha. Se ke oa bula nyeoe ea ESC.
|
|
MOKHOA OA HO SEBELISA
Beha paramente ka 'ngoe ea ESC ka tsela e latelang.
Ho hokela moetsi oa lenaneo
Ts'ebetso ea likonopo tsa ho edita Hokela OCA-3100HV/OCA-3070HV soketeng ea ESC ea OCP-3, le betri (4.87.4V) ho sokete ea BATT ea OCP-3.
Ho beha lintho
Lintlha tse latelang li ka hlophisoa ka OCP-3.
|
Ho beha lintho (mofuta oa mohlala: sefofane) |
|
| ① Mofuta oa betri | ⑨ Lebelo la Brake |
| ② Ho Khaoha ha Betri | ⑩ Qala Matla |
| ③ Mofuta oa ho khaola | ⑪ Freewheel e sebetsang |
| ④ Nako ea koloi | ⑫ Moeli oa Hona Joale |
| ⑤ Ho potlakisa | ⑬ Litlhophiso tsa 'musisi |
| ⑥ Maqhubu a ho khanna | ⑭ Mofuta oa koloi |
| ⑦ Reverse Rotation | ⑮ Mokhoa oa Throttle |
| ⑧ Brake Force | ⑯ Khutlisa Tsela e Fetileng |
Mokhoa oa ho seta ESC u sebelisa OCP-3
- Hokela betri ho ESC.
- Hokela betri (4.87.4V) soketeng ea BATT ea OCP-3.
Khetha ntho ea ho seta ka ho tobetsa likonopo tsa UP le DOWN. - Kgetha kapa o fetole ntho ya ho seta ka ho tobetsa LEFT le dikonopo tse TOKELO.
- Boleng bofe kapa bofe bo khethiloeng ba ho seta bo tšoaroa ka hlooho ho ESC ka bonngwe ntle le ho o kopa hore o nke kgato e nngwe hape ya ho hopola boleng ba ESC.
※ Ha ho na molumo oa elektroniki o tsoang ho OCP-3 le enjene ha o tobetsa likonopo.
Khetha ntho ea ho seta ka ho tobetsa konopo ea UP kapa TLASE. Likonopo tsa LETELE le LA HO LETSA ke ho khetha ntho e 'ngoe le e 'ngoe tlhophisong kapa ho fetola tlhophiso.
- Mofuta oa Leshala
Khetho ea ho seta: LiPo kapa NiCd
Litlhophiso tsa kamehla : LiPo
Khetha mofuta oa betri le palo ea lisele tse nang le LEFT le li-buttons tsa TOKELO. Ho beha palo ea lisele tsa betri: AUTO Haeba NiCd e khethiloe, fetisa ntlha ea ho seta ②.
Lekhalo la khaohanotage e lokisoa ka bo eona ho 50% ea boleng ba pele. - Ho tlosoa ha betri
Sebaka sa ho beha: 2.9V ~ 3.2V
Boemo ba kamehla: 3.2V
Beha sekheo sa voltage ha u khetha Betri ea LiPo ka LETELE le konopo e TOKENG. - Mofuta oa ho qetela
Khetho ea ho seta: Fokotsa matla ka 50% kapa TIMA (Emisa koloi)
Litlhophiso tsa kamehla: Fokotsa matla ka 50%
Khetha mokhoa oa ho khaola motlakase ha voltage ea betri e theohela ho boleng bo behiloeng ba voltage e nang le likonopo tsa LETELE le LITJOALOKAHA. - Motor Nako
Sebaka sa ho beha: 0 ~ 25 °
Boemo ba kamehla: 12°
Bakeng sa 2 ~ 4-pole motors, hangata re khothaletsa 0 ~ 5 ° Beha boleng ka har'a mefuta e bontšitsoeng ka tlase. bakeng sa mofuta oa rotor e ka hare : 0 ~ 10 ° bakeng sa mofuta oa rotor ea ka ntle : 10 ~ 25 ° Khetha nako ea nako e sa le teng ka LEFT le likonopo tse TOKILE. - Ho potlakisa
Boemo ba mefuta: 20 ~ 200
Tlhophiso ea kamehla: 100
Ena ke lebelo leo ESC e fihlang ka lona lebelo le holimo. Khetha boleng ba ho potlakisa ka LEFT le likonopo tse TOKELO. Boleng ba ho seta ke 50 kapa ka tlase haeba enjene e ka UTLOA/TIMA ka switjha e ka holim'a board ea transmitter joalo ka liglider. - Maqhubu a ho Khanna
Khetho ea ho beha: 8kHz / 16kHz / 32kHz
Khetha boleng ka LEFT le likonopo tse TOKELO. Re khothaletsa 32kHz bakeng sa motors tse 10-pole kapa ka tlase ho moo. - Reverse Rotation
Khetho ea ho seta : Tloaelehileng / Reverse
Khetha tsela eo u potolohang ka eona ka LEFT le likonopo tse TOKILE. - Brake Force
Setting range : OFF~100%
Tlhophiso ea kamehla : TIMA
Beha boleng ka LEFT le likonopo tse TOKILE. - Lebelo la Brake
Setting range : 0 ~ 2.0 metsotsoana
Boemo ba kamehla : metsotsoana e 0.1
Beha boleng ka LEFT le likonopo tse TOKILE. - Qala Matla
Khetho ea ho khetha: Super Soft / E bonolo haholo / E bonolo /
Hard Default Setting : Soft
Khetha matla a ho qala ka LEFT le likonopo tse TOKILE. - Active Freewheel (sistimi e nchafatsang ea braking)
Khetho ea ho beha : OFF / ON
Litlhophiso tsa kamehla : OFF
Kgetha HO BUA kapa TIMA ka LETELE le dikonopo tse TJHANG. "Brake Mode" e sebetsa ha thupa ea throttle e fallisetsoa ho 30% kapa ho feta. - Moeli oa hajoale
Litlhophiso tsa mefuta: OFF / 40 ~ 120%
Litlhophiso tsa kamehla: 100%
Beha boleng ka LEFT le likonopo tse TOKILE.
Paramethara ena e laola nako e feteletseng bakeng sa ho boloka matla le ho fokotsa tlhahiso ea mocheso. - Boemo ba 'musisi
(Thibela tšebetso ea litlholisano tsa FAI F3A.)
Setting range : OFF / ON
Litlhophiso tsa kamehla : OFF
Kgetha HO BUA kapa TIMA ka LETELE le dikonopo tse TJHANG.
Ha u sebelisa 'musisi, khetha ON 'me u etse qeto ea litekanyetso tsa lintho tse latelang ho beha phaello ea' musisi. Boemo bo fokolang ba boemo ba ho potoloha: Lebelo la Min 1 ~ 25 Boemo bo phahameng ba ho potoloha: Lebelo la Max Speed 1 ~ 25 Boemo bo fokolang ba ho potoloha ke rpm ha throttle stick e le boemong bo tlaase ka ho feletseng. Boholo ba maemo a ho potoloha ke tlhophiso e phahameng ka ho fetisisa ea rpm.
● Setting ea Min Speed
Boemo ba mefuta: 1 ~ 25
Litlhophiso tsa kamehla: 1
Beha boleng ka LETELE le likonopo tse TOKELO ho etsa qeto ea nako eo 'musisi a qalang ho sebetsa ka eona.
'Musisi o qala ho sebetsa ka pele ho 1. Ka 25 e qala morao-rao.
※ Boleng hangata bo beoa 1 ntle le haeba u batla ho bo fetola.
● Max Speed setting
Boemo ba mefuta: 1 ~ 25
Litlhophiso tsa kamehla: 8
Beha boleng ka LEFT le likonopo tse TOKILE.
Sena ke ho beha lebelo ho fihlela boholo ba rpm ho latela ts'ebetso ea throttle.
Rpm e nyoloha ka ho lekana ho 8 ho ea holimo ho rpm, empa ho itšetlehile ka hore na sekhahla sa throttle se behoa joang. Fokotsa boleng haeba rpm e fihla ho rpm e phahameng pele ho throttle e felletseng.
※ Eketsa boleng haeba rpm e sa fihle ho rpm e kholo le ho tsubella ka botlalo.
● Governor Gain setting
Boemo ba maemo: 10% ~ 40%
Litlhophiso tsa kamehla: 20%
Beha boleng ka LEFT le likonopo tse TOKILE.
Ha boleng bo behiloe bo boholo, ke moo motor rpm e ntseng e eketseha.
※ Qala ho tloha ho 20% ebe u fumana maemo a hau a matle. - Mofuta oa Enjene
Khetho ea ho beha : Boleng bo tloaelehileng / OMA-4013/OMA-6030/ OMH-4535
Khetha boleng ka LEFT le likonopo tse TOKELO. Khetha Boleng bo tloaelehileng hangata. - Mokhoa oa Throttle
Khetho ea ho seta: boleng ba othomathiki / seta
Beha boleng ka LEFT le likonopo tse TOKILE.
Khetha ntho ea ho seta ka likonopo tsa UP le DOWN.
Ha u sa khethe "Automatic" 'me u behe boleng:
Boleng ba PWM bakeng sa boemo ba ho emisa throttle: 800 ~ 1200
Boleng ba PWM bakeng sa boemo bo phahameng ba throttle: 1800 ~ 2200 - Khutlisa Default
Khetho ea ho khetha: CHE / YES
Litlhophiso tsa kamehla : NO S
khetha CHE kapa YES ka LETELE le likonopo tse TOKELO.
Haeba u khetha YES, tobetsa konopo e NEHELA hape ho netefatsa ho khutlisetsa litlhophiso tsa Default.
Khetha ntho ea ho seta ka likonopo tsa UP le DOWN.
- Litlhaloso, moralo, le likahare tsa bukana ea litaelo tsa motorare ho ka fetoha ntle le tsebiso pele bakeng sa ntlafatso.
Ka kopo contacte-info@os-engines.co.jp or professional@os-engines.co.jp bakeng sa lipotso le lipotso.
URL: http://www.os-engines.co.jp
6-15 3-Chome Imagawa Higashisumiyoshi-ku
Osaka 546-0003, Japane
TEL. (06) 6702-0225
FAX. (06) 6704-2722
© Copyright 2021 ka OSEngines Mfg. Co., Ltd. Litokelo tsohle li sirelelitsoe.
Litokomane / Lisebelisoa
 |
OS ENGINE OCA-3100HV ESC Programmer [pdf] Litaelo OCA-3100HV, OCA-3070HV, Lenaneo la ESC |
