TWR-K40D100M Low Power MCU e nang le
USB le Karolo ea LCD
Bukana ea Mosebelisi

MCU ea Matla a Tlase e nang le USB le Karolo ea LCD
Sistimi ea Tora
Sethala sa Boto ea Nts'etsopele

Tseba Boto ea TWR-K40D100M

TWR-K40D100M Freescale Tower System
Sethala sa Boto ea Nts'etsopele
Boto ea TWR-K40D100M ke karolo ea Freescale Tower System, sethala sa boto ea ntlafatso ea modular se nolofalletsang prototyping e potlakileng le ts'ebeliso ea lisebelisoa hape ka lisebelisoa tse lokisoang bocha. TWR-K40D100M e ka sebelisoa ka khetho e pharaletseng ea liboto tsa peripheral tsa Tower System.

Lintlha tsa TWR-K40D100M

• MK40DX256VMD10 MCU (100 MHz ARM® Cortex® -M4 konokono, 512 KB flash, SLCD, USB FS OTG, 144 MAPBGA)
• Mohloli o bulehileng o kopantsoeng oa JTAG (OSJTAG) potoloho
• MMA8451Q 3-axis accelerometer
• Li-LED tse 'nè tsa boemo bo laoloang ke basebelisi
• Li-touchpad tse 'ne tsa capacitive le li-pushbutton tse peli tsa mochini
• Sokete ea TWRPI ea sepheo se akaretsang (Mojule oa plug-in oa Tora)
• Potentiometer, sokete ea karete ea SD le sets'oants'o sa betri ea sele ea tšepe

Mohato ka Mohato
Litaelo tsa ho Hloma
Tataisong ena ea ho Qala ka Potlako, u tla ithuta ho theha mojule oa TWR-K40D100M le ho tsamaisa pontšo ea kamehla.

1. Kenya Software le Tools
   Kenya P&E Micro
   Setsi sa lisebelisoa tsa Kinetis Tower. Setsi sa lisebelisoa se kenyelletsa OSJTAG le li-driver tsa USB-to-serial.
   Tsena li ka fumanoa Inthaneteng ho freescale.com/TWR-K40D100M.
   
2. Lokisa Hardware
   Kenya betri e kenyellelitsoeng ka har'a sesebelisoa sa betri sa VBAT (RTC). Ebe, hokela karolo e kenyellelitsoeng LDC TWRPI-SLCD ka har'a sokete ea TWRPI. Qetellong, hokela pheletsong e 'ngoe ea thapo ea USB ho PC le pheletsong e' ngoe ho matla / OSJTAG sehokedi sa mini-B mojuleng wa TWR-K40D100M. Lumella PC ho iketsetsa li-driver tsa USB ha ho hlokahala.
3. Sekama Boto
   Eketsa lehlakore la boto ho ea ka lehlakoreng ho bona li-LED tse ho D8, D9, D10 le D11 li khantša ha li sekamisitsoe.
4. Tsamaea ka Karolo ea LDC
   Karolo ea LDC e tla bonts'a metsotsoana e fetile ho tloha ha e qala. Tobetsa SW2 ho fetola lipakeng viewka metsotsoana, lihora le metsotso, potentiometer le mocheso.
5. Ithute Haholoanyane
   Lekola likarolo tsohle le bokhoni ba demo e reriloeng ka reviewho fana ka tokomane ea lab e fumanehang ho freescale.com/TWR-K40D100M.
6. Ithute haholoanyane ka Kinetis K40 MCUs
   Fumana tse ling tsa MQX™ RTOS le li-labs tsa tšepe le software bakeng sa Kinetis 40 MCUs ho freescale.com/TWR-K40D100M.

Likhetho tsa TWR-K40D100M Jumper

Se latelang ke lethathamo la likhetho tsohle tsa jumper. Litlhophiso tsa jumper tse kentsoeng kamehla li bonts'oa mabokoseng a nang le moriti.

Jumper	Khetho	Tlhophiso	Tlhaloso
J10	V_BRD Moqtage Khetho	1-2	Motlakase oa ka har'a sekepe o se o le 3.3 V
		2-3	Motlakase oa ka har'a sekepe o se o le 1.8 V (Li-peripheral tse ling tsa ka har'a sekepe li kanna tsa se sebetse)
J13	Khokahano ea Matla a MCU	ON	Hokela MCU ho phepelo ea motlakase ea onboard (V_BRD)
		TLOA	Arola MCU matla (Hokela ho ammeter ho lekanya hajoale)
J9	Khetho ea Matla a VBAT	1-2	Hokela VBAT ho phepelo ea motlakase ea onboard
		2-3	Hokela VBAT ho molumo o phahamengtage pakeng tsa phepelo ea motlakase ka sekepeng kapa phepelo ea lisele tsa tšepe

Jumper	Khetho	Tlhophiso	Tlhaloso
J14	OSJTAG Khetho ea Bootloader	ON	OSJTAG mokhoa oa bootloader (OSJTAG firmware reprogramming)
		TLOA	Mokhoa oa ho tlosa bothata
J15	JTAG Khokahano ea Matla a Boto	ON	Hokela thepa ea 5 V ho JTAG port (e tšehetsa boto ea motlakase e tsoang ho JTAG pod e tšehetsang phepelo ea 5 V)
		TLOA	Hakolla thepa ea 5 V ho tsoa ho JTAG boemakepe
J12	Khokahano ea IR Transmitter	ON	Hokela PTD7/CMT_IRO ho IR transmitter (D5)
		TLOA	Hakolla PTD7/CMT_IRO ho IR transmitter (D5)
J11	Moamoheli oa IR Khokahano	ON	Hokela PTC6/CMPO _INO ho moamoheli oa IR (Q2)
		TLOA	Hakolla PTC6/CMPO _INO ho moamoheli oa IR (02)
J2	VREGIN Khokelo ea Matla	ON	Hokela USBO_VBUS ho tloha lifti ho ea VREGIN
		TLOA	Hakolla USBO_VBUS ho tloha lifti ho ea VREGIN
J3	GPIO ho khanna RSTOUT	1-2	PTE27 ho khanna RSTOUT
		2-3	PTB9 ho khanna RSTOUT
J1	FlexBus Aterese Khetho ea Latch	1-2	Latch ea aterese ea FlexBus e koetsoe
		2-3	FlexBus aterese latch e lumelletsoe

Etela freescale.com/TWR-K40D100M, freescale.com/K40 kapa freescale.com/Kinetis bakeng sa tlhahisoleseling mabapi le mojule oa TWR-K40D100M, ho kenyelletsa:

• Bukana ea litaelo ea TWR-K40D100M
• Lethathamo la lintlha tsa TWR-K40D100M
• Leqephe la lintlha tsa Tower System

Tšehetso
Etela freescale.com/support bakeng sa lethathamo la linomoro tsa mohala sebakeng sa heno.
Tiisetso
Etela freescale.com/warranty bakeng sa tlhahisoleseding e feletseng ea tiisetso.

Ho fumana lintlha tse ling, etela freescale.com/Tower
Kena le sechaba sa Marang-rang sa Marang-rang ho towergeeks.org
Freescale, logo ea Freescale, logo ea Energy Efficient Solutions le Kinetis ke matšoao a khoebo a Freescale Semiconductor, Inc., Reg. US Pat. & Tm. E tima. Tower ke letshwao la kgwebo la Freescale Semiconductor, Inc. Mabitso a mang kaofela a dihlahiswa kapa tshebeletso ke thepa ya beng ba ona. ARM le Cortex ke matshwao a kgwebo a ngodisitsweng a ARM Limited (kapa makala a yona) ho EU le/kapa kae kapa kae. Litokelo tsohle li sirelelitsoe.
© 2013, 2014 Freescale Semiconductor, Inc. Nomoro ea Doc: K40D100MQSG REV 2 Nomoro ea Agile: 926-78685 REV C

E jarollotsoe ho tsoa Arrow.com.

Litokomane / Lisebelisoa

NXP TWR-K40D100M Low Power MCU e nang le USB le Karolo ea LCD [pdf] Bukana ea Mosebelisi TWR-K40D100M Low Power MCU e nang le USB le Karolo ea LCD, TWR-K40D100M, TWR-K40D100M MCU e nang le USB le Karolo ea LCD, Low Power MCU e nang le USB le Karolo ea LCD, MCU e nang le USB le Karolo ea LCD, MCU, USB, Karolo ea LCD.

Litšupiso

• Bukana ea Mosebelisi