NUX NRN1 Huminator Noise Gate

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenya Matla ho Sesebediswa

• Hokela adaptara ea motlakase ho sesebelisoa ebe u e hokela ka har'a sesebelisoa sa motlakase.
• Tobetsa konopo ea matla ho bulela sesebelisoa.

Ho Khetha Liphello

• Use the effect selection knob to choose between Plexi Crunch, Analog Delay, Steel Singer Distortion, Analog Chorus, and Recto Distortion.

Ho fetola li-Parameters

• Each effect has its own parameters such as delay time, distortion level, chorus intensity, etc.
• Use the corresponding knobs to adjust these settings according to your preference.

Ho boloka li-Presets

• You can save your favorite settings as presets by holding down the preset button for a few seconds.
• To recall a preset, simply press the preset button once.

Selelekela

• Thank you for choosing the NUX Reissue Series NRN-1 Huminator Noise Gate Pedal.
• This pedal features dynamic LED indicators that visually track real-time noise suppression levels, paired with two selectable modes: MUTE Mode for instant silence during playing pauses and REDUCTION Mode for smooth signal decay that retains natural sustain.
• It’s dedicated SEND/RETURN loop isolates noisy pedals to protect your core guitar tone while achieving transparent noise reduction, and with an upgraded 18V internal power circuit, the Huminator ensures enhanced headroom even when driving high-output pickups.

Fetileview

• Tlosa lerata le sa batleheng, etsa molumo hantle.
• The internal circuit converts the power supply to 18V, for greater headroom and wider usability.
• Mekhoa e Mebeli: Mokhoa oa ho fokotsa le mokhoa oa ho khutsisa.
• Letšoao la LED le matla.
• Loop ea litlamorao tse hahelletsoeng.
• 100% potoloho ea Analog.

Litlhaloso

• Tšitiso ea ho kenya: 1 M Ohms
• Output impedance: 1 k Ohms
• Matla: Betri ea 9V kapa adaptara ea kantle ea AC e fanang ka 9V DC e laoloang bonyane 100mA ( )
• Dimensions: 121 (L) x 770N) x 48(D) mm
• Boima ba 'mele: 253g

Se ke oa beha haufi le mehloli ea mocheso, joalo ka li-radiator, li-registry tsa mocheso, kapa lisebelisoa tse hlahisang mocheso.
Itebele khahlanong le lintho kapa lino tse kenang ka har'a sebaka se koaletsoeng.
Fetisetsa lits'ebeletso tsohle ho basebetsi ba tšoanelehang.
Ho mamela nako e telele maemong a phahameng a molumo ho ka baka tahlehelo ea kutlo e ke keng ea lokisoa le / kapa ts'enyo. Etsa bonnete ba hore o ikoetlisetsa "ho mamela ka mokhoa o bolokehileng".

Latela litaelo tsohle 'me u mamele litemoso tsohle
BOLOKA LITAELO TSENA!

Sesebelisoa sa Sehlahisoa

1. DC IN Jack
   Use a regular 9V DC adaptor with a Negative Tip to power this pedal. It’s highly recommended to use the optional NUX ACD-006A adaptor. Using an incompatible adaptor may cause noise or malfunction.
2. Knob
   Adjust at which signal level at the reduction will start.
3. Knob ea ho bola
   Lokisa hore na lets'oao la tlhahiso le tla fokotsoa kapele hakae ha lets'oao la ho kenya le oela ka tlase ho Threshold. Fetolela konopo ena ho ea ka nako bakeng sa pholiso ea tlhaho.
4. PHOKOTSO/ BUUTSA Phetoho
   Khetha mekhoa ea Huminator.
   • Boemo bo Tlase: Mokhoa oa REDUCTION, phello ea ho fokotsa lerata e buletsoe.
   • Boemo ba ho ea holimo: Mokhoa oa HO HOLISA, lets'oao la tlhahiso le tla khutsisoa ha le feta.
5. SETSEBISO SA LED
   E bonts'a matla a ho fokotsa lerata ka nako ea nnete. Lits'oants'o tse ling lia khanya ha ho fokotseha ho ntse ho eketseha.
   Ha lets'oao le le haufi le semumu, lebone la lamunu lea khantšoa; ha lets'oao le khutsitsoe lebone le lefubedu le a bulela.
6. ON/OFF Pontshi
   Bontša ON/OFF ea Huminator.
7. KENO Jack
   Connect the guitar to this jack. Plugging in this jack switch on the power, whether the effect is engaged or disengaged.
   When not using this pedal, disconnect the cable from this jack to save battery life.
8. PHELETSO Jack
   Connect an amplifier ho jack ena.
9. ROMELA Jack
   Hokela qalong ea loop ea hau ea litlamorao.
10. KHUTLANG Jack
    Hokela pheletsong ea loop ea hau ea litlamorao.
11. Thabana
    Tap the footswitch to turn the effect ON/OFF.
    In the MUTE mode, it will switch between Reduction and Mute.
    In the REDUCTION mode, it will switch between Normal and Reduction.

Mokhoa oa ho hokela

Mokhoa o Tloaelehileng

• Simply connect the NRN-1 into your signal chain as the last pedal AFTER the noisy pedals.

Mokhoa o tsoetseng pele

• Connect the noisy pedals in the SEND/RETURN loop, the NRN-1 will sense your guitar signal and allow the suppression circuit to activate only as your guitar signal dies out, making the sound more natural.

HLOKOMELA
Do not connect delay or reverb effects between the Send and (I Return. Connect them between the NRN-1 and the ampmoqhobi.

Ho kenya Battery

Betri ea 9V e kenyelelitsoe ka har'a sephutheloana sa sehlahisoa. Ka kopo khutlisetsa betri haeba e 'ngoe ea tse latelang e etsahala:

1. Lebone la sesupo le fifala kapa le hloleha ho bonesa.
2. Molumo oa phello o fetoha o fokolang kapa o sothehile haholo.

Ka kopo, hokela snap cord ho betri ebe o kenya betri joalo ka ha ho bonts'itsoe setšoantšong se ka tlase.

HLOKOMELA

1. Ha u chencha betri, netefatsa polarity e nepahetseng.
2. Ho lelefatsa bophelo ba betri, ha o sa sebelise pedali ena, tlosa thapo ho jekete ea INPUT.
3. Haeba sehlahisoa se tla be se sa sebelisoe le ho bolokoa nako e telele, tlosa betri ho thibela ho lutla le tšenyo e ka bang teng.
4. Only use a compatible power adapter for operation.( )

Lisebelisoa

• 9V betri
• Buka ea mong'a
• Setikara sa NUX

TLHOKOMELO!-BOHLOKOA TŠIRELETSO LITS'ELISO
PELE HO HOKA, BALA LITAELO

www.nuxaudio.com

LBH

P: Ke seta sesebelisoa joang ho li-setting tsa feme?

A: To reset the device to factory settings, power off the device, then press and hold the reset button while powering it back on. Release the reset button after a few seconds.

P: A na nka sebelisa li-footswitches tsa kantle ka sehlahisoa see?

A: Yes, you can connect external footswitches to control various functions of the device such as tap tempo, effect bypass, or preset selection.

P: Ke ntlafatsa firmware ea sehlahisoa joang?

A: To update the firmware, download the latest firmware version from the manufacturer's website mme u latele litaelo tse fanoeng ho tataiso ea firmware update.

Litokomane / Lisebelisoa

NUX NRN1 Huminator Noise Gate [pdf] Buka ea Mong'a NRN1, NRN1 Huminator Noise Gate, Huminator Noise Gate, Noise Gate

Litšupiso

• Bukana ea Mosebelisi