NODESTREAM FLEX Sesebelisoa sa Ts'ebetso ea Remote

Ka kopo bala litaelo tsena ka hloko pele u sebelisa sehlahisoa sena

Tlhahisoleseling bakeng sa polokeho ea hau
Sesebelisoa se lokela ho sebetsoa le ho hlokomeloa feela ke basebeletsi ba nang le tsebo. Mosebetsi o fosahetseng oa ho lokisa o ka ba kotsi. Se ke oa leka ho sebeletsa sehlahisoa sena ka bouena. Tampho sebelisa sesebelisoa sena ho ka baka kotsi, mollo, kapa ts'okelo ea motlakase, 'me ho tla hlakola waranti ea hau.

Etsa bonnete ba hore o sebelisa mohloli oa matla o boletsoeng bakeng sa sesebelisoa. Ho hokeloa mohloling o sa nepahalang oa matla ho ka baka mollo kapa ts'okelo ea motlakase.

Tšireletseho ea Ts'ebetso

Pele o sebelisa sehlahisoa, etsa bonnete ba hore likhoele tsohle ha lia senyeha ebile ha li hokahane ka nepo. Haeba u hlokomela tšenyo leha e le efe, ikopanye le sehlopha sa ts'ehetso hang-hang.

• Ho qoba li-circuits tse khutšoane, boloka tšepe kapa lintho tse sa fetoheng hole le sesebelisoa.
• Qoba lerōle, mongobo le mocheso o feteletseng. Se ke oa beha sehlahisoa sebakeng sefe kapa sefe moo se ka kolobang.
• Mocheso oa tikoloho le mongobo:
  • Mocheso:
  • Sebetsa: 0 ° C ho 35 ° C
  • Storage: 0°C to 65°
  • Mongobo (o sa fokotseng):
  • Ho sebetsa: 0% ho isa ho 90%
  • Ho boloka: 0% ho isa ho 90%
• Tlosa sesebelisoa ho tsoa ho motlakase pele o hloekisa. Se ke oa sebelisa metsi kapa aerosol cleaners.
• Ikopanye le sehlopha sa tšehetso support@harvest-tech.com.au haeba u kopana le mathata a theknoloji ka sehlahisoa.

Matšoao

• Ikopanye le Tšehetso support@harvest-tech.com.au
• Harvest Technology Pty Ltd
  7 Turner Avenue, Technology Park Bentley, WA 6102, Australia harvest. technology

Boitlhotlhollo le Copyright

Le ha Theknoloji ea Harvest e tla leka ho boloka tlhahisoleseling e bukeng ena ea mosebelisi e ntse e le teng, Harvest Technology ha e fane ka litlatsetso kapa litiisetso tsa mofuta ofe kapa ofe, tse hlakisang kapa tse fanang ka maikutlo mabapi le botlalo, ho nepahala, ho ts'epahala, ho tshwaneleha kapa ho fumaneha ha tsona mabapi le bukana ea mosebelisi kapa tlhahisoleseling, lihlahisoa, litšebeletso kapa litšoantšo tse amanang le tsona tse fumanehang bukeng ea mosebelisi, website or any other media for any purpose.

The information contained in this document is believed to be accurate at the time of release, however, Harvest Technology cannot assume responsibility for any consequences resulting from the use thereof.

Harvest Technology e na le tokelo ea ho etsa liphetoho ho efe kapa efe ea lihlahisoa tsa eona le litokomane tse amanang le eona ka nako efe kapa efe ntle le tsebiso. Harvest Technology ha e nke boikarabello kapa boikarabello bo bakoang ke ts'ebeliso kapa ts'ebeliso ea lihlahisoa tsa eona kapa litokomane tse amanang le eona.

Any decisions you make after reading the user guide or other material are your responsibility and Harvest Technology cannot be held liable for anything you choose to do.

Ka hona, tšepo leha e le efe eo u e behang ka boitsebiso bo joalo e kotsing ea hao.

Harvest Technology products, including all hardware, software and associated documentation, are subject to international copyright laws. The purchase of, or use of this product, conveys a license under any patent rights, copyrights, trademark rights, or any other intellectual property rights from Harvest Technology.

Tiisetso

• Tiisetso ea sehlahisoa sena e ka fumanoa inthaneteng ho:
  https://harvest.technology/terms-and-conditions/

Polelo ea Tumellano ea FCC

HLOKOMELA: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the user manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To maintain compliance with compliance regulations, shielded HDMI cables must be used with this equipment

Phatlalatso ea Tumellano ea CE / UKCA

Ho tšoaea ka matšoao a (CE) le (UKCA) ho bontša ho lumellana ha sesebelisoa sena le litaelo tse sebetsang tsa European Community 'me ho kopana kapa ho feta litekanyetso tse latelang tsa tekheniki.

• Taelo ea 2014/30/EU - Tšebelisano ea Electromagnetic
• Directive 2011/65/EU - RoHS, thibelo ea ts'ebeliso ea lintho tse ling tse kotsi ho lisebelisoa tsa motlakase le tsa elektroniki.

Tlhokomeliso: Ts'ebetso ea sesebelisoa sena ha ea rereloa tikoloho ea bolulo mme e ka baka tšitiso ea radio.

Rea qala

Selelekela

The Nodestream Flex can facilitate any customer’s Encode or Decode requirement with its comprehensive input, output, and mounting options. The Video Wall functionality enables output of all your Nodestream X streams on individual displays with the flexibility to direct what you want, where you wantt, with ease. Surface, VESA 100, and rack mounting options are available with up to 3 x devices mounted to a single 1.5RU shelf, saving precious rack space.

Likarolo tsa Bohlokoa

Kakaretso

• Compact, fanless design
• Surface, VESA, or Rackmount options
• Phallo e kholo voltage range, low power consumption
• Phatlalatso e tlase, latency e tlase ea HD e phallela ho fihla ho liteishene tsa video tse 16 ho tloha ho 8Kbps ho isa ho 5Mbps
• Multiple input types – 4 x HDMI, US,,B and network streams

Nodestream X

• Encoder kapa Decoder ts'ebetso
• 5 x HDMI outputs with Video Wall function
• Ho fihla ho 16 x livideo ka nako e le 'ngoe
• Mocha oa molumo oa Nodecom
• Ho fihlela ho 11 x melapo ea data
• Forward decoded video streams to Nodestream Live Nodestream Live
• Ho fihla ho 16 x livideo ka nako e le 'ngoe

Setup e tloaelehileng

Nodestream X

Nodestream Live

Lihokelo

Seta botjha konopo

• Reset – Press 2 sec & release Factory Reset – Press & hold

Boemo ba LED
RGB LED ho bontša boemo ba tsamaiso

Boemo ba LED

• RGB LED ho bontša boemo ba tsamaiso
• BLUE Sistimi ea qala
• GREEN Solid (streaming), Flashing (idle)
• Taba ea RED Network

Ethernet
2 x Gigabit RJ45

USB
2 x Type A – Connection of peripherals

Audio ea Analog
3.5mm TRRS

Kenyeletso ya HDMI x4
Connection to HDMI video sources

Video Wall HDMI Output x 4
Configurable display outputs (Decoder mode only)

Setšoantšo sa RS232
3.5mm TRRS – /dev/ttyTHS0

Passthrough HDMI Output
Passive display output

Phetoho ea Matla
Ho tima/tima switjha

Kenyeletso ya Matla 
12-28VDC

Khaello ea Matla

For critical operations, an optional Y split power cable can be supplied to enable the connection of 2 independent power supplies, providing power redundancy. If 1 of the power supplies fails, the other will continue to power the device without interruption to service.

• Nodestream devices are supplied with a Quick Start Guide for installation and detailed UI functions.
• Scan the User Resources QR code on the last page for access
• The device will boot automatically when power is applied

Hlahisa Litholoana

Tsela ea "OUT"
This HDMI output displays the uncut/unscaled output from the device. This output should be used for;

• Encoder modes (Video Wall outputs are disabled in Encoder modes)
• Initial device configuration
• Where a single display is connected in Decoder mode
• Ho view kapa rekota molapo o hlophisitsoeng kaofela ka mokhoa oa Decoder

Lebota la Video

• When in Nodestream X Decoder mode, the Video Wall function of your Flex device enables output to up to 5 displays (4 x Video Wall + 1 x Passthrough). This allows users flexibility to view Kenyeletso efe kapa efe kapa kaofela ha 4 ho tloha ho Encoder e hoketsoeng ho ea ho liponts'o tsa motho ka mong. Ha Encoder e hoketsoeng e ntse e hasanya 1 feela, tlhahiso e khethiloeng e tla hlahisoa linthong tsohle.

• Control of the Video Wall is performed via your Harvest Control Application.
• For specifications of display outputs, refer to “Technical Specifications” on page 19

Tlhophiso

Fetileview

The Web Interface provides details and management of;

• Lintlha tsa mofuta oa software
• Marang-rang
• Lintlha tsa ho kena ha basebelisi
• Tšehetso e hole
• Mokhoa oa tsamaiso
• Litlhophiso tsa seva
• Lintlafatso

Phihlello
The Web Interface can be accessed locally on your device or through a web browser on a PC connected to the same network.

• Web Sehokelo ha se fumanehe ho fihlela software ea Nodestream e se e qalile

Phihlello ea Lehae

1. Connect your device to your LAN, monitor, keyboard/mouse, and power it up.
2. Wait for the software to start, and press Alt+F11n on your keyboard or right click and select configuration.
3. Ha u khothalletsoa, ​​​​kenya lintlha tsa hau tsa ho kena.
   • Lebitso la kamehla = admin
   • Phasewete ea kamehla = admin

Web Phihlello
Hokela komporo marangrang a tšoanang le a sesebelisoa sa hau kapa ka ho toba ka thapo ea Ethernet.

DHCP-Enabled Network

1. Hokela sesebelisoa sa hau ho LAN ea hau 'me u e fe matla.
2. Ho tloha ho web sebatli sa komporo e hoketsoeng marang-rang a tšoanang, kenya aterese ea IP ea sesebelisoa kapa http://serialnumber.loca, e.g, http://au2518nsfx1a014.local..
3. Ha u khothalletsoa, ​​​​kenya lintlha tsa hau tsa ho kena.

The serial number can be found on the product label, affixed to the side of your device..

Non-DHCP e Nobled Network
If your device is connected to a non-DHCP-enabled network, and its network has not been configured, it will fall back to a default IP address of 192.168.100.101.

1. Hokela sesebelisoa sa hau ho LAN ea hau 'me u e fe matla.
2. Lokisa litlhophiso tsa IP tsa komporo e hoketsoeng marang-rang a tšoanang ho:
   • IP192.168.100.102
   • Subnet 255.255.255.252
   • Gateway 192.168.100.100
3. Ho tsoa ho a web sebatli, kenya 192.168.100.101 bareng ea aterese.
4. Ha u khothalletsoa, ​​​​kenya lintlha tsa hau tsa ho kena.

When configuring multiple devices on a non-DHCP-enabled network, due to IP conflicts, only 1 device can be configured at a time. Once a device has been configured, it may be left connected to your network.  ork

Tlhophiso ea Pele

• Nodestream devices require the following to be configured before operation;
  • Marang-rang a sheba ka tlase
  • System refers to “System Mode” on page 11
  • Server(s) ref Server Configuration” on page 11

The primary network of your Nodestream device must be configured to ensure a stable connection and prevent the device from setting its IP address to its static default. Log in to the Web Sehokedi.

1. Ha u se u kene, u tla bona molaetsa oa lamunu oa ho lokisa sebopeho sa MAIN.
2. If connected to a toDHCP-enabled network, save in the “Port” window. Refer to “Port Configuration” on page 8 for configuration of static IP settings.

Marang-rang

Boitsebiso
Displays information related to the selected port (select from the drop-down in the “Port” section)

• Lebitso Lebitso la boema-kepe
• Boemo ba Khokahano ea boemo boema-kepe
• Configured Shows if the port has been configured, whether DHCP is enabled or disabled
• IP aterese
• Subnet Subnet
• Gateway Gateway
• M::TU Set maximum transmission unit
• Adapter ea MAC Aterese ea MAC
• Receiving Live "receiving" throughput
• E romella Live "sending" throughput

Teko

Ping
For testing connection to your Nodestream X server or other devices on your network, i.e,. IP cameras.

1. Enter the  IP address to ping..
2. Click the  Ping button. The notification will display, followed by either.
   • Nako ea ping ho ms atlehile
   • Could not reach the addresses.l

Nodestream X Network
This tool provides a means to test if all network requirements are in place to allow your device to function correctly when operating in Nodestream X modes. The following tests are performed on your Nodestream Server.

1. Teko ea ping ho seva
2. Teko ea koung ea TCP
3. Teko ea TCP STUN
4. Teko ea boema-kepe ba UDP

• Nodestream X Server configuration required, refer to  “Server Configuration” on page 11
• Nodestream devices require Firewall rules to be in place. Refer to “Firewall Settings” on page 9

Tlhophiso ea Boema-kepe

Ethernet
Select the port you’d like to configure from the “Port ” dropdown.

DHCP

1. Select “DHCP” from the “IPv4” drop-down if not already selected, then save.
2. When prompted, confirm the IP settings change.

Bukana

1. Select “Manual” from the “IPv4” drop-down.
2. Kenya lintlha tsa marang-rang joalo ka ha o fane ka Network Administrator ea hau, ebe o tobetsa boloka.
3. When prompted, confirm the IP settings change.
4. Ho kena hape ho Web Sehokelo, kenya aterese e ncha ea IP kapa http://serialnumber.local hao web sebatli.

WiFi
WiFi e fumaneha ha feela ho kentswe adaptara ya USB WiFi. Li-adapter tsa WiFi tse netefalitsoeng:

• TP-Link T2U v3
• TP-Link T3U
• TP-Link T4U
  1. Select “WiFi” from the “Port dropdown.
  2. Select a t network from the list of available networks from the “Visible Network ” drop-down.
  3. Select the security type and enter the password.
  4. Click save for DHCP or select “Manual”, enter port details as provided by your Network Administrator, and then click save.

Hakolla

1. Select WiFi from the “Port” drop-down.
2. Tobetsa konopo ea "Tlosa".
   • Ke marang-rang a IPv4 feela a tšehetsoeng
   • LAN 1 MUST be used for Nodestream traffic. LAN 2 is used for connecting to a separate network stream input. If a non-default MTU is set for a port, you MUST re-enter the value when changing port settings for the value to be retained.

Litlhophiso tsa Firewall

Ho tloaelehile hore marang-rang a marang-rang a li-firewall / gateways / anti-virus software e be le melao e thata e ka 'nang ea hloka phetoho ho lumella lisebelisoa tsa Nodestream ho sebetsa.

Nodestream X devices communicate with the server and each other via TCP/UDP ports; therefore, the following permanent network rules for all inbound & outbound traffic must be in place:

Boema-kepe

• TCP 8180, 8230, 45000, 55443 & 55555
• UDP 13810, 40000 & 45000 - 45200
• Server access to the  IP address

Lumella sephethephethe ho ea/ho tloha (lethathamo la bosoeu);

• myharvest.id
• *.nodestream.live
• *.nodestream.com.au
• Likarolo tsohle tsa boema-kepe li kenyelelitsoe
• Ikopanye le ts'ehetso ea Harvest bakeng sa lintlha tse ling. support@harvest-tech.com.au

Ho sibolloa

Fumana lisebelisoa tsa Nodestream
Nodestream devices connected to the same network as your device will display. Click the icon next to the Device IP to open its Web Sehokelo ka fensetere e ncha.

Kopitsa lintlha tsa seva tsa Nodestream X
Ho kopitsa lintlha tsa seva sa Nodestream X ho sesebelisoa se seng;

1. Tobetsa ea icon of the device server details you’d like to copy
2. Netefatsa ketso
3. Nodestream X software will restart and connect to the new server

Fumana Nodestream X Server
Ho fihlella seva sa Nodestream X web interface, tobetsa the icon next to the Nodestream X Server IP.

 

Tsamaiso

Lisebelisoa
E bonts'a tlhahisoleseling e amanang le lits'ebetso tsa software le ts'ebeliso ea lisebelisoa tsa bona. Sena se ka thusa ho hlahloba mathata a software le / kapa ts'ebetso.

Seta bocha le Tšehetso

• Netweke Reset E seta botjha di-setting tsohle tsa netweke hore e be tsa kamehla.
• Seta Sesebediswa Botjha E seta botjha ditshebediso tsohle le di-setting tsa seva hore e be tsa kamehla
• Factory Reset Resets ALL device settings to default (alternatively, hold “ctrl+alt” and press “r” on a connected keyboard, or use the reset button, see below, to factory reset your device

Remote support is enabled by default.t

Nchafatsa Password
E u lumella ho fetola lifaele Web Interface login password. If the password is unknown, perform a factory reset. Refer to “Reset and Support” above.

Mokhoa oa Sistimi
Your Nodestream device can operate as either;

• Nodestream X Encoder
• Nodestream X Decoder
• Nodestream Live Encoder
• Active mode is highlighted in RED. To change mo,  click the applicable button.

Tlhophiso ea Seva
All Nodestream devices require configuration on a server for connection and settings management.

Kenya "khoutu e potlakileng" kapa ID ea Seva le Senotlolo se fanoeng ke Mookameli oa Nodestream, ebe o tobetsa "Etsa kopo".

Hang ha sesebelisoa se ngolisitsoe ho seva, Mookameli oa hau oa Nodestream o tla hloka ho eketsa sesebelisoa ho sehlopha ka har'a seva pele se ka sebelisoa.

Ha o sebetsa ka Nodestream X Decoder mode, molapo o "decoded" o ka fetisetsoa ho Nodestream Live. Sena se hloka ngoliso ea sesebelisoa sa hau ho seva sa hau sa Live.

To register your device in your Nodestream Live web portal and add a new device. When prompted, enter the 6-digit code shown in your device Web Leqephe la sistimi kapa komporo ea sesebelisoa (sesebelisoa se tlameha ho ba ho Nodestream Live Encoder kapa Nodestream X Decoder mode).

Lintlafatso

Lintlafatso tsa Automatic
Automatic updates are disabled by default. Enabling this feature allows the device to download and install software when a newer version is available. During this process, the device may restart. If this is not desired, set to “No”.

Lintlafatso tsa Manual
Ha apdeite e fumaneha bakeng sa sesebelisoa sa hau, lets'oao le tla hlahisoa haufi le "Updates" tab.

Ho kenya (li)ntlafatso tse fumanehang:

1. Bula karolo ea Updates ea Web Sehokedi.
2. Khetha "Ntlafatsa (kenya ka ho sa feleng)" 'me u amohele maemo ha u khothalletsoa.
3. Motsamaisi ea ntlafalitsoeng o tla tsoela pele ho khoasolla le ho kenya apdeite.
4. Once the update process is complete,, your device or the software may restart.

 

Lintlafatso li kentsoe butle-butle. Ha apdeite ka letsoho e phethiloe, tsoela pele ho khatholla molaoli oa ntlafatso le ho kenya liapdeite ho fihlela sesebelisoa sa hau se le maemong.

Ts'ebetso ea Nodestream X

Fetileview
Nodestream X is a point-to-point video, audio, and data streaming solution with ultimate control, allowing customers to meet operational requirements. A basic system comprises;

• Encoder Kenya le ho khouta video/data/audio
  Decoder Display/output decoded streams
• Control Application:: Manage connections and settings
• Services manage device groups, users, licensing, and communicate control messages

Sekoahelo
Ha o sebetsa ka mokhoa oa Nodestream X, 'me tsamaiso e le boemong ba standby (eseng ho phallela video), sekoahelo se bonts'a tlhahisoleseding ea tsamaiso. Sena se lumella mosebelisi ho view the current system status and assists with diagnosing system issues.

1. Mokhoa oa Video / Mofuta oa Software
   Mokhoa oa hajoale oa video - Encoder kapa Decoder le Nodestream software e kentsoe.
2. Sesebelisoa sa Sesebelisoa
   Nomoro ea serial ea sesebelisoa.
3. IP ea seva
   IP address of your Nodestream server.
4. Boemo ba Marang-rang
   Displays the current status of network ports:
   1. IP address shown down (unplugged), not configured
5. Boemo ba Khokahano ea Seva
   Waiting for Nodestream connection. Connecting to Nodestream serv.er Server connection error
6. Frame Rate, Resolution & Bit-rates
   Frame rate and resolution of video that will be streamed to a Decoder (Encoder mode only), and current transmit and receive bit-rates.
   • Netweke e hoketswe mme e hlophisitswe.
   • Network not connected to the device.
   • Network not configured – refer to “Port Configuration” on page 8
   • Connected to the server, ready to connect to another device. Connecting to the server.
   • There is a network issue preventing connection to the server. Refer to “Troubleshooting” on page 20

If the overlay is not displayed, it may be disabled. Enable it via your Harvest Control Application.

Video

Khouto
Ha sesebelisoa sa hau se sebetsa ka mokhoa oa Encoder, lintho tse kenang li ka ba teng viewed holim'a sehlahlo se hokahaneng. Lintlha, joalo ka ha li khethiloe ka sesebelisoa sa hau sa Kotulo, li tla hlahisoa. Sena se ka ba molemo ho hlahloba mathata ka lisebelisoa tsa hardware le/kapa marang-rang a video.

Video e bonts'itsoeng e bonts'a se tla romelloa ho Decoder e hoketsoeng. Liphetoho ho sekhahla sa foreimi le tharollo li tla bonahala.

Lisebelisoa tsa Hardware
Compatible sources connected to the device via HDMI or USB 3.0 can be selected as inputs within your Harvest control application. For a detailed list of supported input types, refer to “Technical Specifications” on page 19.

Due to copyright restrictions, HDCP (High-bandwidth Digital Content Protection) signals, such as those from DVD players and media streamers, cannot be captured.

Mehloli ea Tlhahlobo
Mehloli ea video ea liteko e hahiloe ka har'a sesebelisoa sa hau hore e sebelisoe joalo ka kenyelletso ho thusa ka ho rarolla mathata kapa ho seta qalong. Tsena li ka khethoa ka sesebelisoa sa hau sa taolo ea Kotulo.

• Mohloli oa Mohloli oa Teko oa video oa loop
• Test Patte:  rn Simple low bandwidth loop
• Colour Bars Colour bars with a white noise section for testing colour and high bandwidth

Mokhoa oa Pro

• Enable Pro Mode via your Harvest Control Application to activate the following features:
• 4K60 Video (4 x 1080/60)
• Lintlha tsa Frame Synchronous
• Kenyelletso ea data ea UDP boema-kepeng ba 40000 e tsamaisoa, foreimi e lumellana, le video e tsamaeang le eona. Sena se ka hlahisoa ho lisebelisoa tsa marang-rang tse 4 ho tsoa ho Nodestream X Decoder ea hau e hokahaneng.
  • Pro Mode can only be activated when hours are available on your account. To purchase hours, contact sales@harvest-tech.com.au.
  • When hours have been depleted, all Pro MMode-enabled streams will fall back to 1080/60.

Mehloli ea Marang-rang
Mehloli ea marang-rang e fumanehang marang-rang a tšoanang le a sesebelisoa sa hau, joalo ka tse tsoang ho lik'hamera tsa IP, e ka khetholoha 'me ea sebelisoa e le lisebelisoa. Lintho tse kentsoeng lia eketsoa le ho laoloa ka sesebelisoa sa Kotulo.

RTSP
Protocol ea Nako ea 'Nete ea Phallo hangata e sebelisoa ho hasanya lik'hamera tsa IP. Li ikhetha ho baetsi ba lik'hamera 'me li ka fapana pakeng tsa mehlala. URI ea mohloli e tlameha ho tsejoa pele e ka sebelisoa e le ho kenya letsoho. Haeba netefatso e lumelletsoe sesebelisoa sa mohloli, lebitso la mosebelisi le phasewete li tlameha ho tsejoa le ho kenyeletsoa atereseng ea URI.

• URI rtsp://[mosebedisi]:[password]@[Host IP]:[RTSP Port]/stream
• Example URI rtsp://admin:admin@192.168.1.56:554/s0

RTP
Real-Time Transport Protocol (RTP) ke protocol ea marang-rang bakeng sa ho fana ka molumo le livideo ka marang-rang a IP. RTP hangata e sebetsa holim'a User Datagpheleu Protocol (UDP). RTP e fapane le RTSP ka hore mohloli oa RTP o hloka ho tseba aterese ea IP ea moamoheli esale pele, kaha e sutumelletsa molaetsa oa video ho IP eo e khethiloeng.

• URI rtp://[IP ea Moamoheli]:[Boema-kepe ba RTP]
• Example URI rtp://192.168.1.56:5004

HTTP

• HTTP streaming comes in several formats: Direct HTTP, HLS, and HTTP DASH. Currently,, only Direct HTTP is supported by Nodestre, but it is not recommended.
• Example URI http://192.168.1.56:8080

Multicast

• Multicast is a one-to-one or many-to-one connection between multiple Decoders and the source. Connected routes must be multicast-enabled. The range of IP addresses reserved for multicast is 224.0.0.0 – 239.255.255.255. Multicast streaming can be delivered via RTP or UDP.
• URI udp://[Multicast IP]:[Port]
• Example URI udp://239.5.5.5:5000

UDP

Video data can also be transmitted and received over plain UDP. It acts similarly to RTP, where the video source will push data to the receiver, requiring in advance to know the destination before streaming can occur. Generally,  it’s preferable to use RTP instead of plain UDP if the user has the choice due to inbuilt mechanisms like jitter compensation in RTP.

• URI udp://[Receiver IP]:[UDP Port]
• Example URI udp://192.168.1.56:5004

Taolo ea PTZ

• Your Nodestream device can control network PTZ cameras via the Windows Harvest Control Application.
• Cameras must be ONVIF-compliant, enabled, and configured with the exact security credentials of the associate.

Phatlalatso ea RTSP.
Your Nodestream device can control network PTZ cameras via the Windows Harvest Control Application.  Cameras must be ONVIF compliant, enabled, and configured with the exact security credentials associated with the TSPP stream.

• Beha tharollo ea mohloli ho 1080 le sekhahla sa foreimi ho 25/30 bakeng sa ts'ebetso e ntle ka ho fetisisa.
• Sebelisa sesebelisoa sa ping ho Web Interface and/or software such as VLC from a PC connected to the network to est/confirm network stream IP’s and URL's.
• Direct cameras away from dynamic references where practical, i.e., water, trees. Reducing image pixel changes will decrease bandwidth requirements.

Decoding
When your device is operating in Nodestream X Decoder mode, nd connected to an Encoder, up to 4 video streams will be displayed on connected monitor(s). Refeto r “Display Outputs” on page 3

Liphetho tsa RTP
Sesebediswa sa hao se ka hlophiswa hore se ntshe divideo tsa sona tse hlakotsweng ka sebopeho sa RTP bakeng sa viewing on another device within the connected network or integration into a 3rd party system, i.e., NVR.

1. Tlhophiso ea Sesebelisoa (ka sesebelisoa sa hau sa Harvest control)
   • Khetha sesebelisoa sa hau ebe u ea ho litlhophiso tsa video tsa sona
   • Kenya aterese ea IP 'me u fane ka boema-kepe bakeng sa liphetho tseo u lakatsang ho li sebelisa, ho fihla ho 4.
2. View the Stream (ka tlase ke 2 examples; other methods not listed may be suitable)
   • SDP File
   • Lokisa SDP file ho sebelisa mohlophisi oa mongolo ka tse latelang.
   • c=IN IP4 127.0.0.1
   • m=video 56000 RTP/AVP 96
   • a=rtpmmap:96 H264/90000
   • a=fmtp:96 media=video; lebelo la oache=90000; lebitso la khouto=H264;
   • GStreamer
     Run the following command from your terminal program. The GStreamer program must be installed.
     gst-launch-1.0 udpsrc port=56000 caps=”application/x-rtp, media=video, clock-rate=90000, encoding-name=H264, payload=96″ ! rtph264depay ! decodebin! videoconvert  autovideosink
   • Nomoro ea boema-kepe, e bonts'itsoeng ka bofubelu, e tlameha ho tšoana le tlhahiso ea RTP eo u ka ratang ho e etsa view
   • Lintho tse hlahisoang li amana ka kotloloho le lintho tse kenngoeng ke sekhouto seo sesebelisoa sa hau se hoketsoeng ho sona.
   • Likou tse khothaletsoang ho sebelisoa ke 56000, 56010, 56020 & 56030

Nodestream Live Module
This feature allows sharing of your Nodestream X stream with external parties via Nodestream Live. Simply add your device to your Nodestream Live organisation,  nd it will be available to share via a timed link or viewed by organisation members. For information on how to add your device, refer to “Server Configuration” on page 11.

• Requires an account and subscription to Nodestream Live
• Stream settings are controlled by the Nodestream X user. The Live stream is a “slaved” view.
• When your device is not connected to an Encoder, the system idle screen will be displayed in Live..

Audio
Nodestream video devices include a single Nodecom audio channel for streaming two-way audio to other Nodestream devices in your group. The following audio devices are supported:

• USB speakerphone, headset, or capture device via the USB A accessory port
• Tlhahiso ea HDMI
• Lisebelisoa tsa molumo lia khethoa le ho hlophisoa ka sesebelisoa sa hau sa Harvest control.

Lintlha
Up to 10 channels of serial, TCP, or UDP data can be simultaneously streamed between connected devices. This versatile function enables: Transmission of telemetry/sensor data to/from remote sites.

• Control of remote systems
• Bokhoni ba ho fihlella sesebelisoa se hole web interfaces, e.g., IP camera, IOT device.
• Fetisetsa data ho tsoa ho Nodestream Decoder ea hau ho sesebelisoa sa motho oa boraro le/kapa sesebelisoa sa marang-rang sa lehae.

• Liteishene tsa data li hoketsoe le ho hlophisoa ka sesebelisoa sa hau sa Harvest control.
• Lintlha tse pharalletseng ha lia lokela ho ts'eptjoa bakeng sa lits'ebetso tsa taolo ea bohlokoa.
• Data can also be streamed in Pro Mode. Refer to “Pro Mode” on page 14

Laola Lisebelisoa

• Lihokelo tsa lisebelisoa le litlhophiso tse amanang le ho kenya/liphetho li laoloa ka lisebelisoa tsa Harvest control. Nodester
• A control-only iOS application developed for iPad. Typically used in control applications or when a customer’s Nodestream group comprises only hardware devices.
• Nodestream bakeng sa Windows
• Windows Nodestream Decoder, audio, le sesebelisoa sa taolo.
• Nodestream bakeng sa iOS le Android
• iOS le Android Nodestream Decoder, Encoder, audio, le sesebelisoa sa taolo.
• Nodestream Live Operation

Fetileview

• Nodestream Live is a point-to-cloud video and audio streaming solution that facilitates viewho fihla ho liteishene tsa video tse 16 (sesebediswa ka seng) ho efe kapa efe web-enabled device connected to the Internet. A basic system comprises;
  • Encoder Ingest le Encode video/audio
  • Server managesdevicess, inputs, organisations, and users

Litlhahiso tsa Encoder

Lisebelisoa
HDMI le/kapa mehloli ea video ea USB e hokahaneng le sesebelisoa sa hau e ka khethoa e le likenyelletso ka litlhophiso tsa sesebelisoa ho Nodestream Live ea hau web portal. For a detailed list of tosupported types, refertoe “Technical Specifications” on page 19.

Marang-rang
Network sources, such as IP cameras, available on the network(s) your device is connected to,,nareused as inputs. Network inputs are configured via the “Inputs” page within your Nodestream Live portal. A device must be in the same oorganization to be available for selection on the device settings page. For more information, refer to ” toNetwork Sources” on page 15

• The number of network streams possible, before quality is affected, depends on the source resolution and frame rate. For 16 x sources, the theggested resolution is 1080 and frame rate 25; higher resolutions will affect performance.

Audio
Where audio is enabled on a configured RTSP source, the Nodestream Live Encoder will automatically detect and stream it to your web portal. Audio streams can be muted/unmutedviviahe portal.

Sehlomathiso

Litlhaloso tsa Tekheniki

Ho batle phoso

Tsamaiso

Marang-rang

Video

Audio

Ikopanye le Tšehetso support@harvest-tech.com.au

Harvest Technology Pty Ltd

• 7 Turner Ave, Technology Park
• Bentley W,  A 6102, Australia
• kotulo.theknoloji
• All rights reserved. This document is the property of Harvest Technology Pty Ltd. No part of this publication may be reproduced, stored in a retrieval systemor   ransmitted in any form or by any means, electronic, photocopy,  recording, or otherwise, without the written consent of the CEO of Harvest Technology Pty Ltd.

FAQs

P: Na nka sebeletsa sehlahisoa ka bonna?

A: No, it is recommended to only have qualified service personnel service the product to avoid any potential dangers.

P: Nka fumana lintlha tsa tiisetso hokae?

A: The warranty information can be found online at the following link: Warranty Information

Litokomane / Lisebelisoa

NODESTREAM FLEX Sesebelisoa sa Ts'ebetso ea Remote [pdf] Bukana ea Mosebelisi FLEX, FLEX Remote Operations Decoder, Remote Operation Decoder, Enablement Decoder

Litšupiso

• Bukana ea Mosebelisi