NICOR H12VSENSOR Sensor Remote Programmer

LIEKETSENG TS'OANELO

Phepelo ea motlakase	2xAAA1 5V betri, ho khethoa alkaline
Ho jara mokotla	RC-100 ka mokotlaneng oa thepa
Puisano	940 nm Infrared Tx & Rx
Sebaka sa ho kenya	Ho fihla ho 15 m (50 ft.)
Op. mocheso	0°C-50°C (32°F-122°F)
Litekanyo	123 x 70 x 20.3 limilimithara (4. 84″ x 2.76″ x 0. 8″)

TLHOKOMELO  Tlosa libeteri sebakeng haeba remote e ke ke ea sebelisoa ka mor'a matsatsi a 30.

FEELAVIEW

Sesebelisoa sa Remoutu sa Wireless IR Confiquration Tool ke sesebelisoa se ts'oaroang ka letsoho bakeng sa ts'ebetso ea hole ea li-sensor tse kentsoeng ke IR. Sesebelisoa se nolofalletsa sesebelisoa ho fetola ka pushbutton ntle le litepisi kapa lisebelisoa, 'me se boloka mekhoa e meng ea li-sensor tse 'ne ho potlakisa tlhophiso ea li-sensor tse ngata.
Taolo ea hole e romella setlhophiso sa sensor ka bophahamo bo holimo ho fihla ho maoto a 50. Sesebelisoa se ka bonts'a liparamente tsa sensor tse neng li thehiloe pele, li kopitsa liparamente le ho romella liparamente tse ncha kapa ho boloka paramethara ea profiles. Bakeng sa merero moo litlhophiso tse tšoanang li ka batloang ho pholletsa le palo e kholo ea libaka kapa libaka, bokhoni bona bo fana ka mokhoa o hlophisitsoeng oa tlhophiso. Litlhophiso li ka kopitsoa sebakeng sa marang-rang, kapa libakeng tse fapaneng.

LIEKETSENG LELED

LED	TLHALOSO	LED	TLHALOSO
KHANYA	Mosebetsi o phahameng oa ho fetola trim (Ho Beha boemo ba mabone a hokahaneng nakong ea ho lula)		Ho khetha boleng ba hajoale bo potileng joalo ka moeli oa letsatsi. Karolo ena e thusa sesebelisoa hore se sebetse hantle maemong afe kapa afe a 'nete a kopo.
TSIETSO	Ho beha kutlo ea kutlo ea ho lula ha kutlo		Sensor ea khanya ea motšehare e emisa ho sebetsa, 'me motsamao o mong le o mong o bonoang o ka bonesa sesebelisoa sa mabone, ho sa tsotelehe hore na leseli la tlhaho le khanya hakae.
PUSELETSO NAKO	Nako eo Sensor e tla tima (haeba u khetha boemo ba boemo bo itseng ke 0) kapa ho fifatsa leseli ho ea boemong bo tlase kamora hore sebaka se tlosoe.	EMELANG DIM	Ho beha boemo ba tlhahiso ea mabone a hokahaneng nakong ea sekheo. Sensor e tla laola tlhahiso ea mabone boemong bo behiloeng. Ho beha boemo ba STAND-BY DIM ho O ho bolela hore khanya e timme nakong ea mosebetsi.
TŠEBELETSO MOTS'EANE	Ho emela maemo a fapaneng a khanya ea tlhaho bakeng sa Sensor.	EMELANG NAKO	Ho emela nako eo Sensor e tla boloka lebone le le boemong bo lefifi bo tlase kamora hore HOLD NAKO e fete.

 

Fetola li-setting tse ngata tsa li-sensor tse nang le sensor e bohlale ea photocell Open

1. Tobetsa Disp, li-remote lead indicators li tla bontša li-parameter tsa morao-rao.
2. Tobetsa UPor TLASE kenya boemo ba ho seta, parameter Led indicators of remote control e tla khantša ho khethoa.
3.  Tobetsa , Lits'oants'o tse 2 tse etelletsoeng pele li tla benya maemong a sensor ea mots'eare, khetha letsatsi 10 30 50  joalo ka sebaka sa ho bonesa Ka ho iketsa, khetha motšehare 100 300 500  e le sebaka sa ho tima ka ho iketsa.
4. Tobetsa OK ho netefatsa disetting tsohle le ho boloka.
5.  Lebisa ho sensor e shebiloeng ebe u tobetsa ROMELA ho kenya paramethara e ncha. Leseli le etellang pele leo sensor

HLOKOMELA: e emisitsoe ka ho sa feleng.

1. Bula kapa u koale sensor e bohlale ea motšehare ka ho sututsa ha remote control e le boemong ba ho seta.
2. Ha sensor e bohlale ea motšehare e buloa, matšoao a 2 a Led a khanya sebakeng sa sensor ea motšehare. khetha khanya ea letsatsi 10 30 50 joalo ka sebaka sa ho bonesa Ka ho iketsa, khetha motšehare 100 300 500 e le setpoint to light off automatically.Ha sensor e bohlale ya motshehare e koalehile, 1 Led indicator ke flash i setting ya motshehare wa sensor bakeng sa ho kgetha motshehare wa sensor threshold.
3. Ha sensor e bohlale ea motšehare e buloa, nako ea ho ema ke 8 feela
4. Sensor e bohlale ea motšehare e nka sebaka sa sesebelisoa se tloaelehileng sa kantle sa motšehare, se sebetsang ka boikemelo.
5. Sheba Mosebetsi oa Sensor ea Motšehare.

Mosebetsi oa Corridor

Ts'ebetso ena ka har'a sensor ea motsamao ho fihlela taolo ea maemo a mararo, bakeng sa libaka tse ling tse hlokang tsebiso ea phetoho ea leseli pele ho tima. Sensor e fana ka maemo a 3 a khanya: 100% -> leseli le lefifi (leseli la tlhaho ha lea lekana) -> tima; le linako tse 2 tsa nako ea ho leta e khethiloeng: nako ea ho ts'oara le nako ea ho ema; Sebaka se ikhethileng sa khanya ea letsatsi le sebaka sa bolokolohi ba ho lemoha.

• Ka khanya e lekaneng ea tlhaho, lebone ha le khantše ha boteng bo bonoa.
• Ka khanya e sa lekaneng ea tlhaho, sensara e khantša lebone ka bo eona ha boteng bo bonoa.
• Ka mor'a nako e khuts'oane, lebone lea fifala ho ea boemong bo emeng haeba leseli la tlhaho le potolohileng le le ka tlase ho moeli oa letsatsi.
• Leseli le itima hang ka mor'a hore nako ea ho ema.

Mosebetsi oa Mots'eare oa Sensor

Bula sensor ea motšehare ka ho sutumetsa ha remote control e le boemong ba ho seta.

• Leseli le khantša ka 100% ha ho na le motsamao o bonoang.
• Leseli lea fifala ho ea boemong bo emeng ka mor'a ho ts'oara kalaka.
• Leseli le lula le fifala bosiu.

Litlhophiso pontšong ena:

• Nako ea ho ts'oara: 30min
• setpoint to light on : 50lux
• sebaka sa ho tima: 300lux
• Emeng haufi Dim: 10%
• Nako ea ho ema: +oo (ha sensor e bohlale ea photocell e buleha, nako ea ho ema ke +oo feela)

MOSEBETSI OA LETLOTLO

TSEBISO

The SETTING Content e na le litlhophiso tsohle tse fumanehang le li-parameter bakeng sa li-sensor tse hole. E u lumella ho fetola taolo e fumanehang, li-parameter, le ts'ebetso ea sensor ho tloha fekthering ea kamehla kapa ea hajoale.

Fetola li-setting tse ngata tsa sensor (s)

1. Tobetsa Disp konopo, li-leds tsa remote control li tla bonts'a liparamente tsa morao-rao tseo u li behileng.
   HLOKOMELA: ha o sututsa BONAHALA/TSHA konopo pele, o lokela ho tobetsa Auto konopo ho notlolla kutlo.
2. TobetsaUP or TLASE kenya boemong ba ho seta, li-parameter tsa li-remote control li tla khantša ho khethoa, ho ea sebakeng seo u se batlang ka ho tobetsa. UP MOSEBETSI OA KA TLAS'A LETSATSI LETSATSI ho khetha li-parameter tse ncha.
3. Tobetsa "OK" ho netefatsa litlhophiso tsohle le ho boloka.
4. Ikemisetse ho sensor e shebiloeng ebe u tobetsa ho kenya paramente e ncha, lebone le etelletsoeng pele leo sensor e le hokelang le tla tima / tima joalo ka ha ho netefatsoa.
   HLOKOMELA: Setting e sebetsa mohato oa bohlokoa ke ka UP or TLASE, kenya boemong ba ho seta.
   HLOKOMELA: Lebone le etelletsoeng pele leo sensor e hokelang ho lona le tla benya / tima ho netefatsa ho amohela liparamente tse ncha.
   HLOKOMELA: Haeba o tobetsa Disp konopo, litsupa tse etelletsoeng pele tse hole li tla bonts'a liparamente tsa morao-rao tse rometsoeng.

• Ha leseli la tlhaho le feta sebaka se behiloeng ho khanya, lebone le tla tima leha sebaka se le teng.
• Leseli le ikemela ka 10% ha leseli la tlhaho le sa lekana (ha le sisinyehe).

Mosebetsi oa Corridor VS Mots'ehare oa Sensor.

1. ln corridor function, bonesa lebone LE TLAMEHA ka boemo ba khanya ea tlhaho bo tlase ba sensor ea motšehare le Occupancy. Ka ts'ebetso e bohlale ea sensara ea mots'eare, bonesa lebone ka boemo bo tlase ba khanya ea motšehare hore le bonese le haeba ho se na sekheo.
2. Sebakeng sa "corridor function", tima leseli ka nako ea ho ema ha ho se na sekheo. Ka ts'ebetso e bohlale ea sensor ea motšehare, tima lebone ka boemo ba khanya ea tlhaho bo phahameng ho feta sets'oants'o sa mots'eare ho tima pele ho letsatsi ha o le teng.
3. ln ts'ebetso e bohlale ea sensor ea mots'eare, boemo ba leseli la tlhaho bo bobebe / bo tlase ho feta sebaka sa motšehare ho tima / ho bulela TŠOANTŠE ho boloka bonyane motsotso o le mong, o tla tima/ho bonesa lebone ka bohona.

Mabapi le RESET le MODE(1,2,3,4) Remoutu control e tla le 4 Scene MODES tseo e seng tsa kamehla. U ka etsa li-parameter tse lakatsehang 'me ua li boloka e le MODE e ncha (1,2,3,4) ho hlophisa li-sensor tse kentsoeng.

SETA HAPE: litlhophiso tsohle li khutlela ho li-setting tsa DIP Switch in sensor.

MEKHOA YA SENESE(1 2 3 4)

Kopo	Khetho ea Sebaka	Khanya	Sebaka sa Detection	Tšoara Nako	Nako ea ho ema	St nd-byDim Level	Sensor ea Motšehare
Ka hare	Mokhoa1	100%	75%	5min	30min	30
Ka hare	Mokhoa2	100%	75%	1min	+ ooo	3
Ka hare	Mokhoa3	100%	75%	mn	30min	30	30 LU
Kantle	Mokhoa4	100%	75%	1m	+ ooo		(30LUX/300LUX)

Fetola MODES:

1. tobetsa Mokhoa oa 1/Mode2/Mode3/Mode4 konopo, li-remote control Led indicators li bontša li-parameter tse teng.
2. tobetsa UP MOSEBETSI OA KA TLAS'A LETSATSI LETSATSI  ho khetha li-parameter tse ncha.
3. Tobetsa OK ho netefatsa diparamente tsohle le ho boloka mokgweng.

HLOKOMELA Mosebetsi oa ho kenya o u lumella ho lokisa sensor ka liparamente tsohle ts'ebetsong e le 'ngoe. U ka khetha CURRENT SETTING parameters kapa MODE bakeng sa ho kenya.

Litlhophiso tsa hajoale kapa MODE li hlahisoa ho Remote control. Kenya liparamente tsa hajoale ho sensor(s),'me u phete liparamente tsa sensor ho ea ho tse ling

1. Tobetsa Disp konopo kapa tobetsa Mokhoa oa 1/Mode2/Mode3/Mode4 liparamente tsohle li bonts'oa ho Remote control.
   Hlokomela: hlahloba hore na li-parameter kaofela li nepahetse, haeba ho se joalo, li fetole.
2. Sheba ho sensor ebe o tobetsa Romela konopo , lebone leo sensor e le kopanyang le tla be le butswe/ho tima joalo ka ha ho netefatsoa. Tlhokomeliso: haeba sensor e 'ngoe e hloka liparamente tse tšoanang, sheba feela sensor ebe u tobetsa Romela konopo.

Litokomane / Lisebelisoa

NICOR H12VSENSOR Sensor Remote Programmer [pdf] Buka ea Taelo H12VSENSOR, H12VSENSOR Sensor Remote Programmer, Sensor Remote Programmer, Remote Programmer

Litšupiso

• Bukana ea Mosebelisi