Netzer VLX-247 Hollow Shaft Rotary Encoder Kit Encoder
Selelekela sa VLX Encoders
E etselitsoe ho fihlela litlhoko tsa lits'ebetso tse hlokang ka ho fetesisa
Letoto la VLX la Electric Encoders™ ke letoto la li-encoders tse etselitsoeng taolo e nepahetseng e phahameng ea motsamao bakeng sa lits'ebetso tsa indasteri, li-automation le liroboto.
Li-encoder tsena li ipapisitse le theknoloji ea capacitive e ntlafalitsoeng le ho ntlafatsoa ka lilemo tse fetang 20 ke Netzer Precision Position Sensors.
Li-encoder tsa VLX li khetholloa ka likarolo tse latelang tse li khethollang ho li-encoder tse ling tse tšoanang:
- Tlaase profile (<10.7 limilimithara)
- Hollow shaft (Stator / Rotor)
- Ha ho na li-bearings kapa likarolo tse ling tsa ho ikopanya
- Qeto e phahameng le ho nepahala ho babatsehang
- Ho itšireletsa ho matla a khoheli
- Mamello e phahameng ea mocheso o feteletseng, ho tšoha, mongobo, EMI, RFI
- Boima bo tlase haholo
- Kakaretso ea ho hlahisa le ho utloa
- Digital interfaces bakeng sa boemo bo feletseng
Sebopeho se akaretsang sa VLX Electric Encoder™ se etsa hore e be e ikhethang. Ho bala ha eona ke phello e lekantsoeng ea sebaka sohle sa potoloho ea rotor. Sebopeho sena sa sebopeho sa tlhaho se fana ka encoder ea VLX ka nepo e ikhethang hammoho le ho kenya mochini o mamellang.
Ho ba sieo ha likarolo tse kang li-ball bearing, li-couplers tse feto-fetohang, li-disc tsa khalase, mehloli ea leseli le li-detectors, hammoho le tšebeliso e tlase ea matla, li nolofalletsa li-encoder tsa VLX ho fana ka ts'ebetso e batlang e sa atlehe.
Litlhaloso tsa Tekheniki
Kakaretso
| Qeto ya angular | 18-20 hanyane |
| Ho nepahala ha maemo ka lebitso | ±0.010° / ±0.006° |
| Lebelo le phahameng la ts'ebetso | 4,000 rpm |
| Lekhalo la litekanyo | Phetoho e le 'ngoe, e se nang moeli |
| E hahiloe ka Test BIT | Taba ea boikhethelo |
| Tataiso ea ho potoloha | CW/CCW* e ka fetoloang |
* Mokhoa o ts'oanang oa kamehla ho tsoa lehlakoreng le ka tlase la encoder
Mechini
| Eccentricity e lumelletsoeng | ± 0.1 limilimithara |
| Mamello e lumelletsoeng ea axial | ± 0.3 limilimithara |
| Rotor inertia | 876,053 dikgerama · mm2 |
| Boima bo felletseng | 220 gr |
| Kantle Ø / Inner Ø / Bophahamo | 247 / 171 / 10.7 limilimithara |
| lintho tse bonahalang (stator / rotor) | PCB (FR4) |
| Lekhalo la moea le ikhethileng (stator, rotor) | 1 limilimithara |
Motlakase
| Phepelo voltage | 5V ± 5% |
| Tšebeliso ea hona joale | ~ 90 mA |
| Khokahano | Sehokelo: DF13A-10P -1.25H |
| Puisano | SSi, BiSS-C |
| Khoutu ea tlhahiso | Binary |
| Tlhahiso ea serial | Phapang RS-422 |
| Maqhubu a oache | 0.1-5.0 MHz |
| Sekhahla sa ntlafatso ea boemo | 35 kHz (Ka boikhethelo - ho fihla ho 375 kHz) |
Tikoloho
| EMC | IEC 6100-6-2, IEC 6100-6-4 |
| Mocheso oa ho sebetsa | -40°C ho ea ho +85°C |
| Mocheso oa polokelo | -40°C ho ea ho +85°C |
| Mongobo o amanang | 98% Ha e koleke |
| Mamello ya ho tshoha / tshebetso | 100g 6msec saw-leino ka IEC 60068-2-27:2009 |
| Ts'ebetso ea ho sisinyeha | 20g @ 10 ho isa ho 2000 Hz fiela ka IEC 60068-2-6 |
| Tshireletso | IP40 |
Khoutu ea ho Odara
Litšoantšo tsa Mechini
Ntle le ha ho boletswe ka tsela e nngwe
Litekanyo li ka: mm Qetello ea bokaholimo: N6
Mamello ea linear
0.5-4.9: ±0.05 mm 5-30: ±0.1 mm
31-120: ±0.15 mm 121-400: ±0.2 mm
Sets'oants'o sa Taolo ea Mechanical Interface
Lithapo tsa lisebelisoa (boikhethelo)
| SSi / BiSS
CB-00088-250 |
Litlhaloso
AWG30, 250 limilimithara |
| CB-00088-500 | AWG30, 500 limilimithara |
Polokelo le Ho Tšoara
Mocheso oa polokelo: -40°C ho ea ho +85°C
Mongobo: Ho fihla ho 98% e sa koaheleng
Tšireletso ea ESD
Joalo ka tloaelo bakeng sa lipotoloho tsa elektroniki, nakong ea ho sebetsana le sehlahisoa u se ke oa ama lipotoloho tsa elektroniki, lithapo, lihokelo kapa li-sensor ntle le tšireletso e loketseng ea ESD. Mohokahanyi / opereishene o tla sebelisa lisebelisoa tsa ESD ho qoba kotsi ea tšenyo ea potoloho.
TLHOKOMELO Ela hloko mehato ea ho itlhokomela BAKENG SA TŠOARO EA LITABA TSA ELECTROSTATIC SENSITIVE DEVICES
Sehlahisoa se Felletseview
Fetileview
VLX-247 absolute position Electric Encoder™ ke sensor ea boemo ba rotary e ntlafalitsoeng bakeng sa lits'ebetso tse boima. Hajoale e sebetsa ka mefuta e mengata ea liroboto, li-automation le lits'ebetso tsa indasteri.
Theknoloji e seng ea khokahanyo ea Electric Encoder™ e fana ka tekanyo e nepahetseng ea boemo ka ho feto-fetoha ha sebaka sa motlakase.
VLX-247 Electric Encoder™ ke kit-encoder, ke hore, rotor ea eona le stator li arohane.
- Encoder stator
- Encoder rotor
Ho phutholla - taelo e tloaelehileng
Sephutheloana sa VLX-247 se tloaelehileng se na le encoder Stator & Rotor.
Lisebelisoa tseo u ka li khethang:
- CB-00088-250, 250mm khokahanyo harness.
- CB-00088-500, 500mm khokahanyo harness.
- CNV-00003, RS-422 ho USB converter (ka USB ka hare 5V tsela ea phepelo ea matla).
- NanoMIC-KIT-01, RS-422 ho sesebelisoa sa USB. Mekhoa ea ho seta le ea ts'ebetso ka SSi / BiSS interface.
- DKIT-VLX-247-SG-CH, Mounted SSi encoder on rotary jig, RS-422 to USB converter le likhoele.
- DKIT-VLX-247-IG-CH, Mounted BiSS encoder on rotary jig, RS-422 to USB converter le likhoele.
Chate ea phallo ea ho kenya
Kenyelletso ea Software ea Encoder ea Motlakase
Software ea Electric Encoder Explorer (EEE):
- E netefatsa ho hlongoa ka nepo bakeng sa lets'oao le lekaneng amptsebo
- Khatiso ea li-offsets
- Kakaretso ea ho theha le tlhahlobo ea matšoao
Karolo ena e hlalosa mehato e amanang le ho kenya sesebelisoa sa software sa EEE.
Bonyane ba litlhoko
- Sistimi e sebetsang: MS windows 7/10, (32/64 bit)
- Memori: 4MB bonyane
- Likou tsa puisano: USB 2
- Windows .NET Framework, V4 bonyane
Ho kenya software
- Sebelisa Motlakase oa Encoder™ Explorer file e fumaneha ho Netzer websebaka: Encoder Explorer Software Tools
- Kamora ho kenya o tla bona lets'oao la software ea Electric Encoder Explorer komporong ea komporo.
- Tobetsa ho lets'oao la software ea Electric Encoder Explorer ho qala.
Mechanical ntseng bo eketseha
Ho kenya encoder - Kemiso ea ho qetela ea Shaft
Ts'ebeliso e tloaelehileng ea ho kenya encoder
- Mounting screws Socket Head Cup Screw 8xM2, 4 ka 'ngoe stator & rotor.
- Ho kenya lithakhisa tsa 4xØ2, 2 e 'ngoe le e 'ngoe ka stator & rotor (ha e kenyelelitsoe le encoder).
Encoder stator/ Boemo bo amanang le Rotor
Bakeng sa ts'ebetso e nepahetseng, lekhalo la moea le lokela ho ba 1 mm ± 0.3 mm
Ka ho hlongoa hantle, lets'oao ampboleng ba litude bo hlahisoang ke encoder, bo ka ba bohareng ba letoto la lets'oao le bontšitsoeng ho software ea Encoder Explorer (sheba morero o ka tlase). Sena se ka fapana ho ea ka mofuta oa encoder.
Netefatsa ho kenngoa ha rotor ka lisebelisoa tsa Encoder Explorer "Signal analyzer" kapa "Signal verification process."
Hlokomela: bakeng sa lintlha tse ling ka kopo bala karolo ea 7
Khokahano ea Motlakase
Khaolo ena reviews mehato e hlokahalang ho hokela encoder ka motlakase le segokanyimmediamentsi sa dijithale (SSi kapa BiSS-C).
E hokela encoder
Encoder e na le mekhoa e 'meli ea ts'ebetso:
Boemo bo felletseng holim'a SSi kapa BiSS-C
Ena ke mokhoa oa kamehla oa ho eketsa matla
Litekanyetso tsa matšoao a SSi / BiSS
| Khoutu ea tlhahiso | Binary |
| Tlhahiso ea serial | Phapang RS-422 |
| Tshupanako | Phapang RS-422 |
| Maqhubu a oache | 0.1-5.0 MHz |
| Sekhahla sa ntlafatso ea boemo | 35 kHz (Ka boikhethelo - ho fihla ho 375 kHz) |
Pinout ea sehokelo
| Pin No. | SSi / BiSS | Litlhaloso |
| 8 | +5V | PS |
| 7 | GND | GND / RTN |
| 6 | Lintlha + |
Lintlha / NCP TX |
| 5 | Lintlha - | |
| 4 | Tshupanako - |
Oache / NCP RX |
| 3 | Oache + |
Cable ya sesebediswa (boikhethelo) Khoutu ea mebala ea lithapo tsa SSi / BiSS
| Oache + | Hlooho | Tshupanako |
| Tshupanako - | Boputsoa | |
| Lintlha - | Bosehla | Lintlha |
| Lintlha + | Botala | |
| GND | Ntsho | Fatše |
| +5V | Khubedu | Phepelo ea motlakase |
Digital SSi Interface
Synchronous Serial Interface (SSi) ke ntlha ea ho supa maemo a serial interface lipakeng tsa master (mohlala, molaoli) le lekhoba (mohlala, sensor) bakeng sa phetiso ea data ea dijithale.
Khetho e hahiloeng ka har'a liteko (BIT)
BIT e bonts'a ho se tloaelehe ho hoholo ho matšoao a ka hare a encoder.
'0' - matšoao a ka hare a ka har'a meeli e tloaelehileng, '1' - Phoso
Nomoro ea Karolo ea encoder e bontša hore na encoder e kenyelletsa BIT. Haeba ho se BIT e bonts'itsoeng ho PN, ha ho na phoso e eketsehileng.
| Tlhaloso | Likhothaletso | |
| n | Qeto ea boemo | 12-20 |
| T | Nako ea oache | |
| f=1/T | Maqhubu a oache | 0.1-5.0 MHz |
| Tu | Nako ea ntlafatso e nyane | 90 metsotso |
| Tp | Emisa nako | 26 – ∞ μsec |
| Tm | Monoflop nako | 25 μs |
| Tr | Nako pakeng tsa likopo tse 2 tse haufi | Tr > n*T+26 μsec |
| fr=1/Tr | Nako ea kopo ea data |
Digital BiSS-C Interface
BiSS - C Interface ke unidirectional serial synchronous protocol bakeng sa phetiso ea data ea dijithale moo Encoder e sebetsang e le "lekhoba" e fetisang data ho latela oache ea "Master". Protocol ea BiSS e entsoe ka mokhoa oa B le mokhoa oa C (mokhoa o tsoelang pele). Khokahano ea BiSS-C joalo ka SSi e ipapisitse le maemo a RS-422.
Khetho e hahiloeng ka har'a liteko (BIT)
BIT e bonts'a ho se tloaelehe ho hoholo ho matšoao a ka hare a encoder.
'1' - matšoao a ka hare a ka har'a meeli e tloaelehileng, '0' - Phoso
Nomoro ea Karolo ea encoder e bontša hore na encoder e kenyelletsa BIT. Haeba ho se BIT e bonts'itsoeng ho PN, karolo ea phoso e lula e le 1.
| Kabo e nyane ka qeto ea sekhoudara | Tlhaloso ea kamehla | Bolelele | |||||
| 17 bit | 18 bit | 19 bit | 20 bit | ||||
| 27 | 28 | 29 | 30 | Ack | Nako eo ka eona encoder e balang boemo bo felletseng, potoloho ea oache e le 'ngoe | 0 | 1/hora |
| 26 | 27 | 28 | 29 | Qala | Letšoao la sekhouto bakeng sa phetiso ea data ea "qala". | 1 | 1 hanyane |
| 25 | 26 | 27 | 28 | "0" | "Qala" hanyane molateli | 0 | 1 hanyane |
| 8…24 | 8…25 | 8…26 | 8…27 | AP | Lintlha tsa "Absolute Position encoder" | Ka qeto | |
| 7 | 7 | 7 | 7 | Phoso | BIT (Khetho e hahiloeng ka har'a Teko) | 1 | 1 hanyane |
| 6 | 6 | 6 | 6 | Hlokomela. | Tlhokomeliso (ha e sebetse) | 1 | 1 hanyane |
| 0…5 | 0…5 | 0…5 | 0…5 | CRC | CRC polynomial bakeng sa boemo, phoso le lintlha tsa temoso ke: x6 + x1 + x0. E fetisoa ka MSB pele le ho inverted.
Biti ea ho qala le "0" hanyane li siiloe ho Palo ea CRC. |
6 likotoana | |
| Khefutso | Elapse pakeng tsa sequential "start" kopo saekele's | 25 μs | |||||
Mokhoa oa ho seta ka NCP (Netzer Communication Protocol)
Mokhoa ona oa ts'ebeletso o fana ka phihlello ka USB ho PC e sebelisang sesebelisoa sa Netzer Encoder Explorer (ho MS Windows 7/10). Puisano e etsoa ka Netzer Communication Protocol (NCP) holim'a RS-422 ho sebelisoa mehala e tšoanang.
Sebelisa kabelo e latelang ea phini ho hokela sehokelo ho sehokelo sa mofuta oa 9-pin D ho RS-422/USB converter CNV-0003 kapa NanoMIC.
Motlakase encoder interface, D Type 9 pin Female
| Tlhaloso | Mmala | Mosebetsi | Pin No |
|
SSi Clock / NCP RX |
Hlooho | Oache / RX + | 2 |
| Boputsoa | Oache / RX - | 1 | |
|
Lintlha tsa SSi / NCP TX |
Bosehla | Lintlha / TX - | 4 |
| Botala | Lintlha / TX + | 3 | |
| Fatše | Ntsho | GND | 5 |
| Phepelo ea motlakase | Khubedu | +5V | 8 |
Hokela encoder ea Netzer ho converter, hokela converter komporong ebe o tsamaisa Sesebelisoa sa Software sa Encoder Explorer.
Khokahano ea motlakase le ho beha fatše
Ela hloko lintlha tse latelang tsa motheo:
- Thebe ea thapo e phaphametseng ka motlakase (e sa hokeloa) ka mokhoa oa kamehla.
- Etsa bonnete ba hore chassis e thehiloe fatše.
- Ho khothaletsoa haholo ho boloka lithapo tsa enjene tsa PWM li sirelelitsoe ka motlakase le/kapa li beoe hole le encoder.
Hlokomela: 4.75 ho 5.25 VDC phepelo ea motlakase e hlokahalang
Netefatso ya Letshwao
Ho qala Encoder Explorer
Netefatsa hore o phethela mesebetsi e latelang ka katleho:
- Mechanical ntseng bo eketseha
- Khokelo ea Motlakase ho encoder
- Encoder Hlahloba Kemiso ea Software
Sebelisa sesebelisoa sa Encoder Explorer (EE)
Netefatsa puisano e nepahetseng le encoder: (Mokhoa oa ho seta ka mokhoa oa kamehla).
Sebaka sa Encoder-daela se na le 'mala o moputsoa ha o le Mokhoeng oa ho Seta, ebang ke ka NanoMic kapa BlueBox (a). Hlokomela hore mokhoa oa ho sebetsa ha o fumanehe ka BlueBox (b).
Letšoao amplitude bar e bontša hore na pontšo e ka har'a mamello e amohelehang (c) . Hlokomela hore pele o etsa ts'ebetso ea netefatso ea Lets'oao bar e ka bonts'a lets'oao la ho se mamelle (d).
Lintlha tsa khouto li hlahisoa sebakeng sa data sa khouto (CAT No., Serial No.) (e).
Pontšo ea sebaka sa ho daela e arabela ho potoloha ha shaft (f).
Ho bohlokoa ho etsa ts'ebetso ea Netefatso ea Lets'oao pele ho ts'ebetso ea encoder ho netefatsa ts'ebetso e nepahetseng.
Mokhoa oa ho netefatsa mats'oao
Ts'ebetso ea Netefatso ea Letšoao e netefatsa hore encoder e kentsoe ka nepo mme e fana ka lets'oao le letle amplitumo. Sena se etsoa ka ho bokella lintlha tse tala tsa likanale tse ntle le tse mahoashe nakong ea ho potoloha.
Khetha skrineng se seholo (a).
Khetha ho qala ts'ebetso (b).
Fetola shaft ho bokella lintlha tse ntle le tse mahoashe tsa liteishene (c).
Haeba ts'ebetso e atlehile, ho ne ho tla hlaha boemo "Netefatso ea matšoao" (d).
Theamp"litude circle" e ne e tla be e le lipakeng tsa li-circles tse peli tse tala, haholo-holo bohareng ba mamello (e).
Leha ho le joalo, hlokomela hore ho kenya encoder ho ea ho mamello e feteletseng ea mochini ho ka baka ampselikalikoe sa litude se tlamehang ho tlosoa bohareng ba boemo ba lebitso.
Haeba lets'oao le sa mamelle tsebiso ea Phoso "Amp"litude" e ka tlase / e phahame ho feta moedi oa min/max oa XXX" e tla hlaha (g).
Ho ekelletsa moo, boemo "Tiiso ea matšoao e hlōlehile - etsa calibration amp"litude" e ne e tla hlaha ka holimo (h).
- Emisa ts'ebetso 'me u kenye sekhoutara hape, ho etsa bonnete ba hore mamello ea ho kengoa ha mochini ha e fete, ho tlosa kapa ho eketsa li-shims kamoo ho hlokahalang.
- Pheta ts'ebetso ea Netefatso ea Lets'oao ka mor'a ho phahamisa hape.
Hang ha ts'ebetso ea netefatso ea lets'oao e phethiloe ka katleho, fetela mohatong oa ho lekanya li-encoder, Karolo ea 13.
Tekanyetso
Li-encoder tsa VLX li kenyelletsa likhetho tse 'maloa tsa ho etsa calibration:
- Tekanyo ea 'Push-Button'
- Boits'oaro bo ikemetseng
- Palo ea matsoho
Tekanyetso ea 'Push-Button'
Mokhoa ona o bonolo oa ho lekanya oa khoneha hang ha encoder e kentsoe 'me e hokahantsoe le sesebelisoa, ntle le ho sebelisa software ea Encoder Explorer kapa ho hokela komporong.
Mokhoa ona oa ho lekanya, ntlha ea zero e ke ke ea fetoloa kaha e behiloe sebakeng sa zero sa feme.
Ha ho khonehe ho sebelisa tekhetlo ea Push-Button haeba lefapha la ho potoloha ha encoder le le ka tlase ho likhato tse 360.
Mokhoa oa ho lekanya 'Push-Button'
Hokela motlakase oa 5V ho sekhoudara 'me mokhoa oa ho lekanya o ka qalisoa.
- Ha ho hokeloa motlakase, LED e lokela ho benya botala kamehla.
Sena se bolela hore sekhouto se se se loketse ho lokisoa - Tobetsa Push-Button (a) bakeng sa metsotsoana e 5.
- Tsoela pele ho potoloha rotor ka metsotsoana e ka bang 10-20.
LED e tla benya ka tsela e 'ngoe e khubelu le e tala (b). - Ha LED e bonts'a botala bo sa feleng, ts'ebetso ea calibration e felile ka katleho.
- Haeba LED e panya ka bofubelu, sena se bolela hore ts'ebetso ea calibration e hlolehile. Haeba ho hloleha - sheba tafole ea tharollo e ka tlase:
| Che ea ho panya | Mohato oa ho lokisa o nang le phoso | Ketso ea ho lokisa e khothalelitsoeng |
| 1 | Sebaka sa motlakase se lerata | 1. Ntlafatsa motheo
2. Pheta mokhoa oa ho lekanya |
| 2 | 1. Letšoao Ampthuto ka lebaka la mamello
2. Offsets ha e khone ho lekanyetsoa |
1. Hlahloba AmpLitumo ka Encoder Explorer. (Sheba Karolo ea 12)
2. Lokisa ho kenya mochine le ho remount encoder 3. Pheta mokhoa oa ho lekanya |
| 3 | 1. Lebelo la ho potoloha le hodimo haholo bakeng sa tshebetso ya ho lekanya
2. Ts'ebetso e felile |
Pheta mokhoa oa ho lekanya ka lebelo le tlase |
Haeba tekhetlo ea 'Push Button' e hloleha khafetsa ka mor'a ts'ebetso ea tokiso, khutlela lits'ebetsong tsa ho lekanya koloi kapa ka letsoho (likarolo 13.2 & 13.3).
Haeba calibration e ntse e hloleha - ikopanye le lefapha la tšehetso la Netzer.
Boits'oaro bo ikemetseng
Auto Calibration e tšehetsoa ke li-encoder tse nang le mofuta oa FW 4 4.1.3 kapa ho feta. Bakeng sa li-encoder tsena ho tla hlaha konopo ea "Auto-calibration".
Mokhoa oa ho lekanya ka boits'oaro
Tshebetso ya Auto-calibration e na le mek e merarotages:
- Teko ea Jitter - e lekola lerata la motlakase bakeng sa likanale tsa Fine, Medium, le Coarse encoder. Nakong ea tlhahlobo ea jitter, shaft e tlameha ho ema.
Tlhokomeliso! Litekanyetso tsa Pass/Fail tsa tlhahlobo ea Jitter li ipapisitse le maemo a thata haholo a feme mme ho hloleha ho ka hlakola tšebetso ea Auto Calibration.
Leha ho le joalo, buka ea Jitter test e le karolo ea Manual Calibration process karolong ea 13.4, e tla thusa mosebedisi ho etsa qeto ea hore na jitter e amoheleha litlhoko tsa eona. - Tekanyetso ea Offset - e etsa calibration ea offset, shaft e tlameha ho potoloha e sa khaotse.
- Absolute Position (AP) calibration - e etsa Coarse AmpLitude Alignment (CAA) le Medium AmpLitude Alignment (MAA) li baloa.
Nakong ea ts'ebetso ea Auto-Calibration, Zero-Position ea encoder e lula e le boemong ba feme ea zero bakeng sa li-encoder tse ncha. Hoa khoneha ho beha Zero Point ka har'a bar ea menu e ka holimo, ka ho khetha "Calibration" tab, le ho tobetsa "Set UZP" joalokaha ho hlalositsoe karolong ea 13.3.
Ho sebetsa ka Auto-calibration
Tobetsa ea konopo.
Fesetere e kholo ea ho lekanya ka boits'oaro ea bula.
Khetha mefuta e nepahetseng ea litekanyo e sebetsang kopong ea hau (a).
Etsa bonnete ba ho boloka shaft e sa sisinyehe ebe o tobetsa konopo
Teko ea Lerata e ne e tla etsoa 'me ha ho phethiloe ka katleho lengolo la "Lerata la Lerata" le tla tšoauoa ka letšoao le letala.
Teko ea Offset e tla qala ka bo eona ha tlhahlobo ea Noise e phethoa. Tekanyetso ena e hloka hore shaft e fetoloe ka ho tsoelang pele.
Tekanyo ea AP e ne e tla qala ka bo eona ha ho phetheloa Tekanyetso ea ho Nepaha. Tsoela pele ho potoloha shaft mokhahlelong ona ho fihlela tlhahlobo ea AP e phethiloe, 'me encoder e setiloe bocha.
Hang ha ho seta botjha ho fedile, tshebetso ya Auto-calibration e phethelwa ka katleho.
Mosebelisi a ka boelaview liphetho tsa calibration ka ho tobetsa eaView data> konopo (b).
Ka linako tsohle hoa khoneha ho hlakola mokhoa oa Auto Calibration ka ho tobetsa konopo ea konopo (c).
Ho hloleha ho lekanya ka boits'oaro
Haeba tlhahlobo e hloleha (mohlalaample teko ea Lerata) - sephetho se tla tšoauoa ka X e khubelu.
Haeba ts'ebetso ea calibration e hlolehile, likhothaletso tsa tokiso li tla hlahisoa, tse tsamaellanang le ntho e hlolehileng tlhahlobo.
Hoa khoneha ho review lintlha tse qaqileng mabapi le ho hlōleha, ka ho tobetsa ea konopo (d).
Ho beha boemo ba lefela ba khouto
Khetha e 'ngoe ea likhetho tsa ho beha ntlha ea zero ebe o tobetsa .
Hoa khoneha ho beha boemo ba hajoale kapa ho potoloha shaft ho ea sebakeng sefe kapa sefe se lokelang ho beoa joalo ka ntlha ea zero.
Hape hoa khoneha ho beha Zero Point ka har'a bar ea menu e ka holimo, ka ho khetha "Calibration" tab, le ho tobetsa "Set UZP".
Teko ea Jitter
Teko ea jitter e sebelisoa ho lekola boemo ba lerata la motlakase.
Jitter e tloaelehileng e lokela ho ba holimo +/- lipalo tse 3; jitter e phahameng e ka bonts'a lerata la sistimi mme e ka hloka ho theoa hantle kapa ho sireletsa mohloli oa lerata oa motlakase.
- Khetha "Calibration" tab, ebe o tobetsa "Jitter Test"
- Khetha mokhoa oa teko oa Jitter (a).
- Beha Nako le Sampmaemo a mang (b).
- Tobetsa konopo (c) 'me u hlahlobe hore na liphetho (d) li na le mamello e amohelehang bakeng sa ts'ebeliso e reriloeng.
Pontšo e 'ngoe ea jitter/lerata le feteletseng ha matheba a maputsoa a le teng amplitude circle ha li aroloe ka ho lekana holim'a selikalikoe se tšesaane joalo ka ha se hlaha ka tlase.
Mokhoa oa Ts'ebetso
SSi / BiSS
Pontšo ea Mokhoa oa Ts'ebetso oa SSi / BiSS encoder interface e fumaneha ka ho sebelisa NanoMIC ho hokahana le encoder. Ha o le Mokgweng wa Tshebetso, mmala wa daela ya boemo ke wa namune.
Bakeng sa tlhaiso-leseling e batsi bala ka NanoMIC ho Netzer websebaka
Mokhoa oa ts'ebetso o sebelisa sebopeho sa SSi / BiSS se nang le sekhahla sa oache sa 1MHz.
Sebaka sa ho daela sekhouto se na le 'mala oa lamunu ha o le Mokhoeng oa Ts'ebetso. Sebaka se ka tlase ho daele, ke lentsoe le tsamaellanang la binary bakeng sa boemo ba hona joale ba shaft (a).
Ntlo-kholo ea Tsamaiso
ISERAELE
Netzer Precision Position Sensors ACS Ltd. Misgav Industrial Park, PO Box 1359
DN Misgav, 2017400 Tel: +972 4 999 0420
usa
Netzer Precision Position Sensors Inc. 200 Main Street, Salem
NH 03079
Mohala: +1 617 901 0820
www.netzerprecision.com
Litokomane / Lisebelisoa
 |
Netzer VLX-247 Hollow Shaft Rotary Encoder Kit Encoder [pdf] Bukana ea Mosebelisi VLX-247, VLX-247, VLX-247 Hollow Shaft Rotary Encoder Kit Encoder, VLX-247, Hollow Shaft Rotary Encoder Kit Encoder, Rotary Encoder Kit Encoder, Encoder Kit Encoder, Encoder |