Netzer Precision VLS-60 Absolute Hollow Shaft Rotary Encoder Kit

Litlhaloso

• Mohlala oa Sehlahisoa: VLS-60
• Mofuta: Absolute Hollow Shaft Rotary Encoder Kit
• Lebitso: Netzer
• Likaroloana: Tharollo ea COTS e netefalitsoeng sebakeng, litekanyo tse kopaneng, boima bo fokolang, saena Netzer hollow shaft
• E etselitsoe: Lisebelisoa tse hlokang, ho hlahloba sebaka

Tlhahisoleseding ya Sehlahiswa

• VLS-60 Absolute Hollow Shaft Rotary Encoder Kit e etselitsoe ho fihlela litlhoko tsa lits'ebetso tse hlokang ka ho fetesisa, haholo-holo lefapheng la ho hlahloba sebaka. Ke karolo ea mohala oa sehlahisoa oa Netzer VLS, o tsejoang ka tharollo ea COTS e netefalitsoeng sebakeng e etselitsoeng bokhabane ka litheko tse tlase.
• Encoder e na le litekanyo tse kopaneng, boima bo fokolang, le signature Netzer hollow shaft, e fanang ka nepo e ke keng ea bapisoa ea bohlokoa bakeng sa misio ea sebaka.
• Netzer e na le lefa la ho fetola likarolo tse fumanehang khoebong le li-encoder tse tloaelehileng bakeng sa lits'ebetso tsa sebaka, ho bokella boiphihlelo bo ikhethang ka mesebetsi e atlehileng. Mofuta oa VLS o etselitsoe ho fihlela litlhoko tse matla joalo ka Total Ionizing Dose (TID) le ho tsoa hanyane, ho bohlokoa bakeng sa ho phela tikolohong e thata.

Litaelo tsa Tšebeliso ea Sehlahisoa

Mechanical ntseng bo eketseha
Latela tataiso ea End-of-Shaft Installation e fanoeng karolong ea 10.1 ea bukana bakeng sa ho kenya encoder ka nepo.

Mokhoa oa Ts'ebetso
Sheba karolo ea 14 ea bukana bakeng sa lintlha tse mabapi le mekhoa ea ts'ebetso, haholo-holo liprothokholo tsa SSi / BiSS.

FAQ (Lipotso Tse Botsoang Hangata)

• Ke lintlha life tsa bohlokoa tsa VLS-60 Absolute Hollow Shaft Rotary Encoder Kit?
  Likarolo tsa bohlokoa li kenyelletsa tharollo ea COTS e netefalitsoeng ke sebaka, litekanyo tse kopaneng, boima bo fokolang, le signature Netzer hollow shaft bakeng sa ho nepahala.
• Encoder ea VLS-60 e loketse lisebelisoa life?
  VLS-60 encoder e etselitsoe lits'ebetso tse boima, haholo-holo lefapheng la tlhahlobo ea sebaka moo ho nepahala le ho ts'epahala ho leng bohlokoa.

VLS Encoders Selelekela

• E etselitsoe ho fihlela litlhoko tsa lits'ebetso tse hlokang ka ho fetesisa
• Qala morero oa hau o latelang oa LEO ka mohala oa sehlahisoa oa Netzer VLS o ke keng oa lekanngoa - e leng eona feela tharollo ea COTS e netefalitsoeng sebakeng e etselitsoeng bokhabane, ka litheko tse tlase.
• Letoto la rona la VLS le etselitsoe ho phahamisa projeke ea hau, e nang le litekanyo tse kopaneng, boima bo fokolang, le signature Netzer hollow shaft bakeng sa ho nepahala ho ke keng ha bapisoa. Litšobotsi tsena ha se melemo feela; li bohlokoa bakeng sa litlhoko tsa ho hlahloba sebaka.
• Ka lefa la ho fetola likarolo tse fumanehang khoebong le li-encoder tse tloaelehileng bakeng sa cosmos Netzer e bokelletse boiphihlelo bo ikhethang ka mesebetsi e mengata e atlehileng.
• Boitlamo ba rona ho boqapi bo bolela hore mofuta oa VLS o kopana le litlhoko tse matla tsa TID (Total Ionizing Dose) le ho tsoa ho fokolang - lintlha tsa bohlokoa bakeng sa ho atleha tikolohong e thata ea sebaka.
• Li-encoder tsa VLS li khetholloa ka likarolo tse latelang tse li khethollang ho li-encoder tse ling tse tšoanang:
  • Ho nepahala ho Phahameng: <0.006 degree
  • Tšebeliso e Tlase ea Matla: <100 mAmp
  • Sebakeng se Pakiloeng: TID (30 Krad) SHEBA (1E11 p/cm²/s protons @ 200MeV) + Ho khaoha ho tlase
  • Parylene Conformal Coating: Ho Ntlafatsoa ha Khase e Ntle (TML<1%, CVCM <0.1%), ho fokotsa kotsi ea Tin Whiskers
  • Moralo o mocha oa Hollow Shaft
  • Pro e tlasefileboholo: <6 limilimithara
  • Nako e Tletseng Mocheso: (ho kenyeletsoa le matšeliso a ho hoholeha ha mocheso)
  • Teko le Tlhahiso e Matla: Ho thothomela, ho sisinyeha, le ESS. Thermal vacuum boikhethelo
  • Bophelo ba Tšebeletso: MTBF lilemo tse 15
  • Customizable Reporting
• Sebopeho se akaretsang sa VLS Electric Encoder™ se etsa hore e be e ikhethang. Ho bala ha eona ke phello e lekantsoeng ea sebaka sohle sa potoloho ea rotor. Sebopeho sena sa sebopeho sa tlhaho se fana ka encoder ea VLS ka nepo e ikhethang hammoho le ho kenya mochini o mamellang.
• Ho ba sieo ha likarolo tse kang li-ball bearing, li-couplers tse feto-fetohang, li-disc tsa khalase, mehloli ea leseli le li-detectors, hammoho le tšebeliso e tlase ea matla, li nolofalletsa li-encoder tsa VLS ho fana ka ts'ebetso e batlang e sa atlehe.

Litlhaloso tsa Tekheniki

Kakaretso 

Mechini

Motlakase 

Tikoloho

Khoutu ea ho Odara

Litšoantšo tsa Mechini

Sets'oants'o sa Taolo ea Mechanical Interface

Likhetho tsa cable

Polokelo le Ho Tšoara

• Mocheso oa polokelo: -55°C ho ea ho +125°C
• Mongobo: Ho fihla ho 98% e sa fokotseng

Tšireletso ea ESD

Joalo ka tloaelo bakeng sa lipotoloho tsa elektroniki, nakong ea ho sebetsana le sehlahisoa u se ke oa ama lipotoloho tsa elektroniki, lithapo, lihokelo kapa li-sensor ntle le tšireletso e loketseng ea ESD. Mohokahanyi / opareitara o tla sebelisa lisebelisoa tsa ESD ho qoba kotsi ea tšenyo ea potoloho.

Sehlahisoa se Felletseview

Fetileview

• Boemo ba VLS-60 absolute Electric Encoder™ ke sensor ea boemo ba rotary e ntlafalitsoeng bakeng sa lits'ebetso tsa Space.
• Theknoloji e seng ea khokahanyo ea Electric Encoder™ e fana ka tekanyo e nepahetseng ea boemo ka ho feto-fetoha ha sebaka sa motlakase.
• VLS-60 Electric Encoder™ ke kit-encoder, ke hore, rotor ea eona le stator li arohane.

  

  1. Encoder stator
  2. Encoder rotor

Ho phutholla - taelo e tloaelehileng
Sephutheloana sa VLS-60 se tloaelehileng se na le encoder Stator & Rotor. E phuthetsoe ka har'a vacuum e habeli e nang le mokotla o tiisang.
Lisebelisoa tseo u ka li khethang:

1. CNV-00003, RS-422 ho USB converter (ka USB ka hare 5V tsela ea phepelo ea matla).
2. NanoMIC-KIT-01, RS-422 ho sesebelisoa sa USB. Mekhoa ea ho seta le ea ts'ebetso ka SSi / BiSS interface.
3. RJ VLS-60 rotary jig
4. DKIT-VLS-60-SG-S0, Mounted SSi encoder on rotary jig, RS-422 to USB converter le likhoele.
5. DKIT-VLS-60-IG-S0, Mounted BiSS encoder ho rotary jig, RS-422 ho USB converter le likhoele.

Chate ea phallo ea ho kenya

Kenyelletso ea Software ea Encoder ea Motlakase

Software ea Electric Encoder Explorer (EEE):

• E netefatsa ho hlongoa ka nepo bakeng sa lets'oao le lekaneng amptsebo
• Khatiso ea li-offsets
• Kakaretso ea ho theha le tlhahlobo ea matšoao
  Karolo ena e hlalosa mehato e amanang le ho kenya sesebelisoa sa software sa EEE.

Bonyane ba litlhoko

• Sistimi e sebetsang: MS windows 7/10, (32/64 bit)
• Memori: 4MB bonyane
• Likou tsa puisano: USB 2
• Windows .NET Framework, V4 bonyane

Ho kenya software 

• Sebelisa Motlakase oa Encoder™ Explorer file e fumaneha ho Netzer websebaka: Encoder Explorer Software Tools
• Kamora ho kenya o tla bona lets'oao la software ea Electric Encoder Explorer komporong ea komporo.
• Tobetsa ho lets'oao la software ea Electric Encoder Explorer ho qala.

Mechanical ntseng bo eketseha

Ho kenya encoder - Kemiso ea ho qetela ea Shaft

Ts'ebeliso e tloaelehileng ea ho kenya encoder

• Mounting screws Socket Head Cup Screw 8xM2, 4 ka 'ngoe stator & rotor.
• Ho kenya lithakhisa tsa 4xØ2, 2 e 'ngoe le e 'ngoe ka stator & rotor (ha e kenyelelitsoe le encoder).

Encoder stator/ Boemo bo amanang le Rotor

• Bakeng sa ts'ebetso e nepahetseng, lekhalo la moea le lokela ho ba 0.6 mm ± 0.3 mm

  

• Ka ho hlongoa hantle, lets'oao ampboleng ba litude bo hlahisoang ke encoder, bo ka ba bohareng ba letoto la lets'oao le bontšitsoeng ho software ea Encoder Explorer (sheba morero o ka tlase). Sena se ka fapana ho ea ka mofuta oa encoder.
• Netefatsa ho kenngoa ha rotor ka lisebelisoa tsa Encoder Explorer "Signal analyzer" kapa "Signal verification process."

  

Khokahano ea Motlakase

Khaolo ena reviews mehato e hlokahalang ho hokela encoder ka motlakase le segokanyimmediamentsi sa dijithale (SSi kapa BiSS-C).
E hokela encoder
Encoder e na le mekhoa e 'meli ea ts'ebetso:

Boemo bo felletseng holim'a SSi kapa BiSS-C
Ena ke mokhoa oa kamehla oa ho eketsa matla

Khoutu ea mebala ea lithapo tsa SSi / BiSS

Litekanyetso tsa matšoao a SSi / BiSS

Digital SSi Interface
Synchronous Serial Interface (SSi) ke ntlha ea ho supa maemo a serial interface lipakeng tsa master (mohlala, molaoli) le lekhoba (mohlala, sensor) bakeng sa phetiso ea data ea dijithale.

Khetho e hahiloeng ka har'a liteko (BIT)

• BIT e bonts'a ho se tloaelehe ho hoholo ho matšoao a ka hare a encoder.
• '0' - matšoao a ka hare a ka har'a meeli e tloaelehileng, '1' - Phoso
• Nomoro ea Karolo ea encoder e bontša hore na encoder e kenyelletsa BIT. Haeba ho se BIT e bonts'itsoeng ho PN, ha ho na phoso e eketsehileng.

  

  	Tlhaloso	Likhothaletso
  n	Qeto ea boemo	12-20
  T	Nako ea oache
  f=1/T	Maqhubu a oache	0.1-5.0 MHz
  Tu	Nako ea ntlafatso e nyane	90 metsotso
  Tp	Emisa nako	26 – ∞ μsec
  Tm	Monoflop nako	25 μs
  Tr	Nako pakeng tsa likopo tse 2 tse haufi	Tr > n*T+26 μsec
  fr=1/Tr	Nako ea kopo ea data

Digital BiSS-C Interface
BiSS - C Interface ke unidirectional serial synchronous protocol bakeng sa phetiso ea data ea dijithale moo Encoder e sebetsang e le "lekhoba" e fetisang data ho latela oache ea "Master". Protocol ea BiSS e entsoe ka mokhoa oa B le mokhoa oa C (mokhoa o tsoelang pele). Khokahano ea BiSS-C joalo ka SSi e ipapisitse le maemo a RS-422.

Khetho e hahiloeng ka har'a liteko (BIT)

• BIT e bonts'a ho se tloaelehe ho hoholo ho matšoao a ka hare a encoder.
• '1' - matšoao a ka hare a ka har'a meeli e tloaelehileng, '0' - Phoso
• Nomoro ea Karolo ea encoder e bontša hore na encoder e kenyelletsa BIT. Haeba ho se BIT e bonts'itsoeng ho PN, karolo ea phoso e lula e le 1.

  

  Bit allocation ho ea ka qeto ea encoder					Tlhaloso ea kamehla		Bolelele
  17 bit	18 bit	19 bit	20 bit
  27	28	29	30	Ack	Nako eo ka eona encoder e balang boemo bo felletseng, potoloho ea oache e le 'ngoe	0	1/hora
  26	27	28	29	Qala	Letšoao la sekhouto bakeng sa phetiso ea data ea "qala".	1	1 hanyane
  25	26	27	28	"0"	"Qala" hanyane molateli	0	1 hanyane
  8…24	8…25	8…26	8…27	AP	Lintlha tsa "Absolute Position encoder"		Ka qeto
  7	7	7	7	Phoso	BIT (Khetho e hahiloeng ka har'a Teko)	1	1 hanyane
  6	6	6	6	Hlokomela.	Tlhokomeliso (ha e sebetse)	1	1 hanyane
  0…5	0…5	0…5	0…5	CRC	CRC polynomial bakeng sa boemo, phoso le lintlha tsa temoso ke: x6 + x1 + x0. E fetisoa ka MSB pele le ho inverted. Biti ea ho qala le "0" hanyane li siiloe ho Palo ea CRC.		6 likotoana
  				Khefutso	Elapse pakeng tsa sequential "start" kopo saekele's		25 μs

Mokhoa oa ho seta ka NCP (Netzer Communication Protocol)
Mokhoa ona oa ts'ebeletso o fana ka phihlello ka USB ho PC e sebelisang sesebelisoa sa Netzer Encoder Explorer (ho MS Windows 7/10). Puisano e etsoa ka Netzer Communication Protocol (NCP) holim'a RS-422 ho sebelisoa mehala e tšoanang.
Sebelisa kabelo e latelang ea phini ho hokela sehokelo ho sehokelo sa mofuta oa 9-pin D ho RS-422/USB converter CNV-0003 kapa NanoMIC.

Motlakase encoder interface, D Type 9 pin Female

Hokela encoder ea Netzer ho converter, hokela converter komporong ebe o tsamaisa Sesebelisoa sa Software sa Encoder Explorer.

Khokahano ea motlakase le ho beha fatše
Ela hloko lintlha tse latelang tsa motheo:

1. Thebe ea thapo e phaphametseng ka motlakase (e sa hokeloa) ka mokhoa oa kamehla.
2. Ho khothaletsoa haholo ho boloka lithapo tsa enjene tsa PWM li sirelelitsoe ka motlakase le/kapa li beoe hole le encoder.
   Hlokomela: 4.75 ho 5.25 VDC phepelo ea motlakase e hlokahalang

Netefatso ya Letshwao

Ho qala Encoder Explorer
Netefatsa hore o phethela mesebetsi e latelang ka katleho:

• Mechanical ntseng bo eketseha
• Khokelo ea Motlakase ho encoder
• Encoder Hlahloba Kemiso ea Software

Sebelisa sesebelisoa sa Encoder Explorer (EE)

• Netefatsa puisano e nepahetseng le encoder: (Mokhoa oa ho seta ka mokhoa oa kamehla).
• Sebaka sa Encoder-daela se na le 'mala o moputsoa ha o le Mokhoeng oa ho Seta, ebang ke ka NanoMic kapa BlueBox (a). Hlokomela hore mokhoa oa ho sebetsa ha o fumanehe ka BlueBox (b).
• Letšoao amplitude bar e bontša hore na pontšo e ka har'a mamello e amohelehang (c) . Hlokomela hore pele o etsa ts'ebetso ea netefatso ea Lets'oao bar e ka bonts'a lets'oao la ho se mamelle (d).
• Lintlha tsa khouto li hlahisoa sebakeng sa data sa khouto (CAT No., Serial No.) (e).
• Pontšo ea sebaka sa ho daela e arabela ho potoloha ha shaft (f).

  

• Ho bohlokoa ho etsa ts'ebetso ea Netefatso ea Lets'oao pele ho ts'ebetso ea encoder ho netefatsa ts'ebetso e nepahetseng.

Mokhoa oa ho netefatsa mats'oao

• Ts'ebetso ea Netefatso ea Letšoao e netefatsa hore encoder e kentsoe ka nepo mme e fana ka lets'oao le letle amplitumo. Sena se etsoa ka ho bokella lintlha tse tala tsa likanale tse ntle le tse mahoashe nakong ea ho potoloha.
  • Khetha skrineng se seholo (a).

    

  • Khetha ho qala ts'ebetso (b).

    

  • Fetola shaft ho bokella lintlha tse ntle le tse mahoashe tsa liteishene (c).

    

• Haeba ts'ebetso e atlehile, ho ne ho tla hlaha boemo "Netefatso ea matšoao" (d).
• Theamp"litude circle" e ne e tla be e le lipakeng tsa li-circles tse peli tse tala, haholo-holo bohareng ba mamello (e).

  

• Leha ho le joalo, hlokomela hore ho kenya encoder ho ea ho mamello e feteletseng ea mochini ho ka baka ampselikalikoe sa litude se tlamehang ho tlosoa bohareng ba boemo ba lebitso.
• Haeba lets'oao le sa mamelle tsebiso ea Phoso "Amp"litude" e ka tlase / e phahame ho feta moedi oa min/max oa XXX" e tla hlaha (g).
• Ho ekelletsa moo, boemo "Tiiso ea matšoao e hlōlehile - etsa calibration amp"litude" e ne e tla hlaha ka holimo (h).

  

  • Emisa ts'ebetso 'me u kenye sekhoutara hape, ho etsa bonnete ba hore mamello ea ho kengoa ha mochini ha e fete, ho tlosa kapa ho eketsa li-shims kamoo ho hlokahalang.
  • Pheta ts'ebetso ea Netefatso ea Lets'oao ka mor'a ho phahamisa hape.
• Hang ha ts'ebetso ea netefatso ea lets'oao e phethiloe ka katleho, fetela mohatong oa ho lekanya li-encoder, Karolo ea 13.

Tekanyetso

Ho bohlokoa hore ts'ebetsong e 'ngoe le e 'ngoe ea encoder, ts'ebetso ea Netefatso ea Letšoao e phetheloe pele ho leka ho lekanya sekhoudara.
Bakeng sa li-encoder tse nang le mofuta oa 4 oa FW 4.1.3 kapa ho feta, hoa khoneha ho khetha mokhoa oa ho lekanya o itirisang ka botlalo, kapa mokhoa oa matsoho oa ho lekanya mohato ka mohato.

Boits'oaro bo ikemetseng

Auto Calibration e tšehetsoa ke li-encoder tse nang le mofuta oa FW 4 4.1.3 kapa ho feta.
Bakeng sa li-encoder tsena ho tla hlaha konopo ea "Auto-calibration".

Mokhoa oa ho lekanya ka boits'oaro
Tshebetso ya Auto-calibration e na le mek e merarotages:

1. Teko ea Jitter - e lekola lerata la motlakase bakeng sa likanale tsa Fine, Medium, le Coarse encoder. Nakong ea tlhahlobo ea jitter, shaft e tlameha ho ema.
   Ela hloko! Litekanyetso tsa Pass/Fail tsa tlhahlobo ea Jitter li ipapisitse le maemo a thata haholo a feme mme ho hloleha ho ka hlakola tšebetso ea Auto Calibration.
   Leha ho le joalo, buka ea Jitter test e le karolo ea Manual Calibration process karolong ea 13.4, e tla thusa mosebedisi ho etsa qeto ea hore na jitter e amoheleha litlhoko tsa eona.
2. Tekanyetso ea Offset - e etsa calibration ea offset, shaft e tlameha ho potoloha kamehla.
3. Boemo bo felletseng (AP) tekano – e etsa Coarse AmpLitude Alignment (CAA) le Medium AmpLitude Alignment (MAA) li baloa.
   Nakong ea ts'ebetso ea Auto-Calibration, Zero-Position ea encoder e lula e le boemong ba feme ea zero bakeng sa li-encoder tse ncha. Hoa khoneha ho beha Zero Point ka har'a bar ea menu e ka holimo, ka ho khetha "Calibration" tab, le ho tobetsa "Set UZP" joalokaha ho hlalositsoe karolong ea 13.3.

Ho sebetsa ka Auto-calibration

• Tobetsa ea konopo.
• Fesetere e kholo ea ho lekanya ka boits'oaro ea bula.
  • Khetha mefuta e nepahetseng ea litekanyo e sebetsang kopong ea hau (a).

    

  • Etsa bonnete ba ho boloka shaft e sa sisinyehe ebe o tobetsa konopo
• Teko ea Lerata e ne e tla etsoa 'me ha ho phethiloe ka katleho lengolo la "Lerata la Lerata" le tla tšoauoa ka letšoao le letala.
• Teko ea Offset e tla qala ka bo eona ha tlhahlobo ea Noise e phethoa. Tekanyetso ena e hloka hore shaft e fetoloe ka ho tsoelang pele.
• Tekanyo ea AP e ne e tla qala ka bo eona ha ho phetheloa Tekanyetso ea ho Nepaha. Tsoela pele ho potoloha shaft mokhahlelong ona ho fihlela tlhahlobo ea AP e phethiloe, 'me encoder e setiloe bocha.
• Hang ha ho seta botjha ho fedile, tshebetso ya Auto-calibration e phethelwa ka katleho.

  

• Mosebelisi a ka boelaview liphetho tsa calibration ka ho tobetsa eaView data> konopo (b).

  

• Ka linako tsohle hoa khoneha ho hlakola mokhoa oa Auto Calibration ka ho tobetsa konopo ea konopo (c).

Ho hloleha ho lekanya ka boits'oaro

• Haeba tlhahlobo e hloleha (mohlalaample teko ea Lerata) - sephetho se tla tšoauoa ka X e khubelu.

  

• Haeba ts'ebetso ea calibration e hlolehile, likhothaletso tsa tokiso li tla hlahisoa, tse tsamaellanang le ntho e hlolehileng tlhahlobo.

  

• Hoa khoneha ho review lintlha tse qaqileng mabapi le ho hlōleha, ka ho tobetsa ea konopo (d).

  

Tekanyetso ka letsoho

The Manual calibration process e na le tse latelang stages:

1. Tekanyetso ea Offset - e etsa calibration ea offset, shaft e tlameha ho potoloha kamehla.
2. Calibration ea CAA / MAA - e etsa Coarse AmpLitude Alignment (CAA) le Medium AmpLitude Alignment (MAA) li baloa
3. Zero Position Set - E sebelisoa ho khetholla Boemo ba Zero ntle le boemo ba feme.
4. Teko ea Jitter - E sebelisoa ho fumana palo ea jitter le ho lumella mosebelisi ho etsa qeto ea hore na e a amoheleha.
   Khetha skrineng se seholo (a).

   

Tekanyetso ea Offset

• Ts'ebetsong ena, DC offset ea matšoao a sine le cosine e lefshoa holim'a lekala la ts'ebetso (offset calibration).
  • Tobetsa (b).
  • Fetola shaft ka mokhoa o tsoelang pele nakong ea ho bokella lintlha, ho koahela karolo eohle ea ts'ebetso ea kopo ho tloha pheletsong ho isa qetellong. Sebaka sa tsoelo-pele (c) se bontša tsoelo-pele ea pokello ea lintlha.
• Lebelo la ho potoloha ha se paramethara nakong ea pokello ea lintlha. Ka mokhoa o ikhethileng, ts'ebetso e bokella lintlha tse 500. Lintlha tse bokelletsoeng bakeng sa likanale tse ntle / tse mahoashe, e lokela ho ba selikalikoe se "sesane" se hlakileng se hlahang bohareng ba merero (d) (e) se nang le monyetla o fokolang.

  

  • Ha tlhahlobo ea offset e phethiloe, tobetsa ho konopo (f).

Tekanyetso ea Coarse AmpLitude Alignment (CAA) & Medium AmpLitude Alignment (MAA)

• Tekanyo e latelang e tsamaisana le kanale e mahoashe, le kanale e mahareng ho li-encoder tse itseng, le mocha o motle ka ho bokella lintlha ho tsoa sebakeng se seng le se seng likanaleng ka bobeli. Sena se etsoa ho etsa bonnete ba hore nako le nako ha encoder e buletsoe, e tla fana ka boemo bo nepahetseng.
  • Khetha khetho e nepahetseng ho tsoa ho Measurement Range (a):
    • Phetoho e felletseng ea mochini - motsamao oa shaft o feta ho potoloha ka botlalo ka likhato tse 360 ​​- (ke eona tekanyo e khothaletsoang).
    • Karolo e lekantsoeng - shaft e na le angle e lekanyelitsoeng ea ho potoloha e ka tlase ho likhato tse 360. Ka mokhoa ona o hloka ho kenya lebelo la ho potoloha ka likhato.
    • Free sampmokhoa oa ho bua - e beha palo ea lintlha tsa calibration ho latela palo eohle ea lintlha ka lebokoseng la mongolo. Sistimi e bonts'a palo e khothaletsoang ea lintlha ka ho sa feleng. Lintlha tse fokolang holim'a lekala la basebetsi ke tse robong.
      Hlokomela hore Kakaretso ea palo ea lintlha e tla fetoha ho ea ho maemo a tloaelehileng a kamehla ho latela mefuta e khethiloeng ea tekanyo e ka holimo.
  • Tobetsa ea konopo (b).

    

• Taolo ea ts'ebetso ea Calibration (c) e bonts'a boemo ba hajoale, le sebaka se latelang sa sepheo seo shaft e lokelang ho potoloha ho sona.
  Fetola shaft sebakeng se latelang, emisa ebe o tobetsa konopo ea konopo ho sample boemo (d). Shaft e lokela ho ba STAND STILL ha o tobetsa konopo.

  

• Boemo ba motsamao oa Shaft (e) bo bontša boemo ba motsamao oa shaft.
  • Qetella sampho sebelisa mokhoa o latelang: ho beha shaft -> ema -> ho tobetsa (d) ho sample boemo.
  • Ha ts'ebetso e phethiloe, tobetsa konopo ea konopo (f).

Ho beha boemo ba lefela ba khouto
Khetha e 'ngoe ea likhetho tsa ho beha ntlha ea zero ebe o tobetsa .

• Hoa khoneha ho beha boemo ba hajoale kapa ho potoloha shaft ho ea sebakeng sefe kapa sefe se lokelang ho beoa joalo ka ntlha ea zero.

  

• Hape hoa khoneha ho beha Zero Point ka har'a bar ea menu e ka holimo, ka ho khetha "Calibration" tab, le ho tobetsa "Set UZP".

  

Teko ea Jitter

• Teko ea jitter e sebelisoa ho lekola boemo ba lerata la motlakase.
• Jitter e tloaelehileng e lokela ho ba holimo +/- lipalo tse 3; jitter e phahameng e ka bonts'a lerata la sistimi mme e ka hloka ho theoa hantle kapa ho sireletsa mohloli oa lerata oa motlakase.
  • Khetha "Calibration" tab, ebe o tobetsa "Jitter Test"

    

  • Khetha mokhoa oa teko oa Jitter (a).
  • Beha Nako le Sampmaemo a mang (b).
  • Tobetsa konopo (c) 'me u hlahlobe hore na liphetho (d) li na le mamello e amohelehang bakeng sa ts'ebeliso e reriloeng.

    

• Pontšo e 'ngoe ea jitter/lerata le feteletseng ha matheba a maputsoa a le teng amplitude circle ha li aroloe ka ho lekana holim'a selikalikoe se tšesaane joalo ka ha se hlaha ka tlase.

  

Mokhoa oa Ts'ebetso

SSi / BiSS

• Pontšo ea Mokhoa oa Ts'ebetso oa SSi / BiSS encoder interface e fumaneha ka ho sebelisa NanoMIC ho hokahana le encoder. Ha o le Mokgweng wa Tshebetso, mmala wa daela ya boemo ke wa namune.
• Bakeng sa tlhaiso-leseling e batsi bala ka NanoMIC ho Netzer websebaka
• Mokhoa oa ts'ebetso o sebelisa sebopeho sa SSi / BiSS se nang le sekhahla sa oache sa 1MHz.
• Sebaka sa ho daela sekhouto se na le 'mala oa lamunu ha o le Mokhoeng oa Ts'ebetso. Sebaka se ka tlase ho daele, ke lentsoe le tsamaellanang la binary bakeng sa boemo ba hona joale ba shaft (a).

  

MABAPI KAMPANI

Ntlo-kholo ea Tsamaiso

• ISERAELE
  • Netzer Precision Position Sensors ACS Ltd.
  • Misgav Industrial Park, PO Box 1359
  • DN Misgav, 2017400
  • Mohala: +972 4 999 0420
• usa
  • Netzer Precision Position Sensors Inc.
  • 200 Main Street, Salem
  • NH 03079
  • Mohala: +1 617 901 0820
  • www.netzerprecision.com

Litokomane / Lisebelisoa

Netzer Precision VLS-60 Absolute Hollow Shaft Rotary Encoder Kit [pdf] Bukana ea Mosebelisi VLS-60 Absolute Hollow Shaft Rotary Encoder Kit, VLS-60, Absolute Hollow Shaft Rotary Encoder Kit, Hollow Shaft Rotary Encoder Kit, Rotary Encoder Kit, Encoder Kit

Litšupiso

• Bukana ea Mosebelisi