NEOUSYS POC-700 Series Ultra Compact Embedded Computer
Tlhokomediso
- Ke basebeletsi ba ts'ebeletso ba tšoanelehang feela ba lokelang ho kenya le ho sebeletsa sehlahisoa sena ho qoba kotsi.
- Ela hloko mekhoa eohle ea ESD nakong ea ho kenya ho qoba ho senya lisebelisoa.
Ho Lokisa Lisebelisoa
Hlakola lisebelisoa 'me u netefatse hore lisebelisoa tse latelang li teng le hore litaba tse fanoeng li nepahetse pele u qala mokhoa oa ho kenya.
Lisebelisoa tse fanoeng ke basebelisi
- Anti-static wrist wrap
Lenane la ho paka
| Ntho | Tlhaloso | Bongata |
| 01 | Sistimi ea letoto la POC-700 | 1 |
| 02 | 3-pin pluggable terminal block | 2 |
| 03 | DIN-rail mount clip | 1 |
| 04 | Nsete sephutheloana | 1 |
POC-700 Series Front Panel
| Che. | Ntho | Desckhutsufatsa |
| 1 | Boemo ba tsamaiso ea LED | Li-LED tsa tsamaiso, Hard Disk Drive (HOD), Watchdog Timer (WOT), taolo ea ho chesa (IGN). |
| 2 | HDMI | Boema-kepe ba HDMI ke boema-kepe ba litšoantšo tse phahameng / boema-kepe bo tšehetsang ho fihla ho 3840 x 2160@30Hz. |
| 3 | Tlhahiso ea DisplayPort | DisplayPort ke setšoantšo sa litšoantšo tse phahameng tse tšehetsang ho fihla ho 4096 x 2160 @ 30Hz. |
| 4 | Seta botjha konopo | Sebelisa konopo ena ho seta sistimi bocha. |
| 5 | Boema-kepe ba USB3.2 Gen2x1 | USB3.1 Gen 2 port (SuperSpeed+) e fana ka ho fihla ho 10Gbps, e leng habeli bandwidth ho feta khokahanyo e teng ea SuperSpeed USB3.1 Gen. 1. E boetse e ea morao e lumellana le USB3.0 le USB2.0 |
| 6 | Ethernet le PoE+ | 4x Gb Ethernet likou ke Intel® I350-AM4 e nang le boema-kepe ba Power over Ethernet (ho POC-715 feela) e ka fanang ka data le matla a motlakase ho lisebelisoa. |
| 7 | 3-pin DC terminal block (kenyeletso ea boikhethelo) | E lumellana le motlakase oa DC ho tloha ho 8V - 35V. Ha sistimi e kentsoe ka khetho ea MezlO™ - V20, block block e ka sebelisoa bakeng sa ho kenya lets'oao la ho tima. |
| 8 | 3-pin Remote on/ off control | E lumella katoloso ea switch ea kantle ha sistimi e beoa ka har'a khabinete. |
Boemo ba Sisteme ea LED
Ho na le matšoao a mane a LED karolong e ka pele: PWR, HDD, WDT le IGN. Litlhaloso tsa li-LED tsena tse 'nè li thathamisitsoe tafoleng e latelang.
| Sesupo | Mmala | Tlhaloso |
| PWR | Botala | Lesupa la motlakase, le bonesitsoeng ha sistimi e butswe. |
| HOD | Khubedu | Letšoao la hard drive, le benyang ha SATA HOD e sebetsa |
| WDT | Bosehla | Sesupa-nako sa Watchdog, se benyang ha sebali-nako sa watchdog se se se qalile |
| IGN | Bosehla | Taolo ea matla a ho tima, e bonesitsoeng ha lets'oao la IGN le sebelisoa. |
HDMI
Boema-kepe ba High-Definition Multimedia Interface (HDMI) bo fana ka video e phahameng ea boleng bo holimo ea dijithale le phetiso ea molumo lipakeng tsa sistimi le sesebelisoa sa ponts'o ea multimedia ka thapo e le 'ngoe. O ka hokela ho tse ding tsa dijithale ka ho sebedisa thapo ya HDMI ho ya ho DVI kapa HDMI-to-DP.
Sistimi e ts'ehetsa liphetho tse peli tse ikemetseng tsa ponts'o ka ho hokahanya lisebelisoa tsa ponts'o ho khokahano ea HDMI le DisplayPort. Ho ts'ehetsa liphetho tse peli le ho fihlela qeto e ntle ka ho fetisisa ea DisplayPort ho Windows, o hloka ho kenya li-driver tsa litšoantšo tse tsamaellanang.
DisplayPort
Sistimi e na le liphetho tse peli tsa DisplayPort (DP) tseo e leng li-interface tsa dijithale tse hokahanyang mohloli oa video le ho tsamaisa molumo sesebelisoa sa ponts'o. Ha o hokela DP, e ka fana ka ho fihla ho 4K UHD (4096 x 2160 @ 30Hz) ka qeto. Sistimi e etselitsoe ho ts'ehetsa adaptara ea DP / cable. O ka hokela lisebelisoa tse ling tsa ponts'o o sebelisa thapo ea DP-to-HDMI kapa thapo ea DP-to-DVI.
Sistimi e ts'ehetsa liphetho tse peli tse ikemetseng ka ho hokahanya likhokahano tsa lisebelisoa tsa DisplayPort. Ho ts'ehetsa liphetho tse peli le ho fihlela qeto e ntle ka ho fetisisa ea DisplayPort ho Windows, o hloka ho kenya li-driver tsa litšoantšo tse tsamaellanang.
Konopo ea ho seta bocha e sebelisoa ho seta sistimi ka bowena haeba sistimi e ka ema kapa e sa sebetse hantle. Ho qoba reset e sa lebelloang, konopo e behiloe ka boomo ka morao ho phanele. Ho seta botjha, ka kopo sebedisa ntho e kang phini (mohlala, ntlha ya pene) ho fihlella konopo ya ho seta botjha.
Boema-kepe ba USB3.2 Gen2x1
Li-ports tsa USB 3.2 Gen2x1 (10Gbps) tsa tsamaiso li kenngoa ts'ebetsong ka molaoli oa xHCI (eXtensible Host Controller Interface) 'me li khutlela morao li tsamaisana le USB3.2 Gen.1 USB 2.0, USB 1.1 le lisebelisoa tsa USB 1.0. UFEI USB e boetse e tšehetsoa kahoo o ka sebelisa keyboard / mouse ea USB tikolohong ea khetla ea UEFI. Ho bonts'itsoe masoba a li-screw-lock bakeng sa kou ea USB e tsamaellanang.
Mokhanni oa xHCI o tšehetsoa ka tlhaho ho Windows 10, ka hona ha ho hlokahale hore u kenye mokhanni oa xHCI pele o sebelisa mesebetsi ea USB.
IEEE 802.3at Matla holim'a Ethernet
Sistimi e fana ka likou tse 'ne tsa Gb Ethernet ka Intel® I350-AM4 mme e khutlela morao e tsamaisana le lebelo la khokahanyo la 100/10Mb.
Boema-kepe ba Gigabit Power over Ethernet (PoE) bo fumaneha feela ho sistimi ea POC-715 e ka fanang ka matla le data ho thapo e tloaelehileng ea CAT-5/CAT-6 Ethernet. E sebetsa joalo ka PSE (Matla a Sourcing Equipment), e tsamaellanang le IEEE 802.3at, kou ka 'ngoe e fana ka ho fihla ho 25W ho Sesebelisoa se Matla (PD).
PoE e iponela ka bo eona ebe e etsa qeto ea hore na sesebelisoa se hokahaneng ke PoE PD kapa che pele se fana ka matla, se etsa hore se tsamaisane le lisebelisoa tse tloaelehileng tsa Ethernet. Ho bontšitsoe lesoba la senotlolo sa screw-lock bakeng sa koung ea Ethernet e tsamaellanang.
E sebetsang/Hokela LED (Ka ho le letona)
| Mmala oa LED | Boemo | Tlhaloso |
| Botala | E tima | Ethernet port e khaotsoe |
| On | Boema-kepe ba Ethernet bo hokahane mme ha ho phetiso ea data | |
| Ho benya | Boema-kepe ba Ethernet bo hokahane 'me data ea fetisa / ea amoheloa |
Lebelo la LED (Ka ho le letšehali)
| Mmala oa LED | Boemo | Tlhaloso |
| Botala kapa Orange | E tima | 10 Mb s |
| Botala | 100. Mb s | |
| namunu | 1000 Mb s |
Thibelo ea li-Pin tse 3 bakeng sa Kenyo ea DC (Kenyo ea Boikhethelo ea ho Ignition)
Sistimi e amohela mefuta e mengata e fapaneng ea matla a DC ho tloha ho 8 ho isa ho 35V ka block terminal ea 3-pin pluggable, e loketseng ts'ebeliso ea tšimo moo motlakase oa DC o atisang ho fanoa. Sekoti clamping mochini o ka har'a terminal block e fana ka ts'epahalo ea khokahano ha o kenya motlakase oa DC. Ntle le ho kenya motlakase oa DC, block block ena e ka boela ea amohela TM ignition signal input (IGN) ha o kentse module ea MezIO e nang le ts'ebetso ea IGN e kentsoeng.
Tlhokomediso
Ka kopo etsa bonnete ba hore molumo o nepahetseng oa DCtage e fanoa ho sistimi.
Ho fana ka voltage fetang 35V e tla senya sistimi.
3-pin Remote On/ Off
Khokahano ea "Remote On/ Off" ea 3-pin e lumella katoloso ea switch ea kantle. E na le thuso ha tsamaiso e kenngoa ka har'a khabinete kapa sebakeng se sa fumaneheng habonolo. O ka hokela remoutu ya kantle ka letshwao la boemo ba kantle ba LED (15mA) ka ho hokela ho PWR LED le GND.
DIO/ COM Port Panel
| Che. | Ntho | Tlhaloso |
| 1 | Dijithale 1/0 | Kenyelletso ea dijithale e 4 e ikhethileng Phatlalatso ea 4 ea dijithale e ikhethileng |
| 2 | Boema-kepe ba COM 2/3/4 | E ka hlophisoa joalo ka: COM2: boema-kepe bo le bong ba RS-422/ 485 COM2/ COM3/ COM4: likou tse tharo tsa 3-terata RS-232 |
| 3 | Boema-kepe ba COM 1 | Software programmable RS-232/ 422/ 485 boema-kepe. |
| 4 | Konopo ea matla | Sebelisa konopo ena ho bulela kapa ho koala sistimi. |
 |
Pulo e boloketsoe ho kenya antenna ea SMA. | |
Digital Input/ Sephetho
Sistimi e fana ka liteishene tse 4x tse ikhethileng tsa dijithale le liteishene tse 4x tse ikhethileng tsa dijithale. Mesebetsi ea DIO e ts'ehetsa mokhoa oa ho khetha oa I/O le tšitiso ea DI phetoho ea boemo.
| Pin # | Pin Tlhaloso | Pin # | Pin Tlhaloso |
| 1 | ISO- DIO- CN | 9 | ISO DO0- CN |
| 2 | IGND0 | 10 | EOGND |
| 3 | ISO DI1 - CN | 11 | ISO DO1 -CN |
| 4 | IGND1 | 12 | EOGND |
| 5 | ISO- DI2- CN | 13 | ISO- DO2- CN |
| 6 | IGND2 | 14 | EOGND |
| 7 | ISO- DI3- CN | 15 | ISO- DO3- CN |
| 8 | IGND3 | 16 | VDD |
COM2/3/4 Boema-kepe
Boema-kepe ba COM2/3/4 bo ka hlophisoa ho BIOS joalo ka kou e le 'ngoe ea RS-422/485 (COM2) kapa likou tse tharo tsa 3-wire RS-232 (COM2/COM3/COM4).
| 3-port RS-232 COM2/ 3/ 4 | |||
| Pin # | COM2 | COM3 | COM4 |
| 1 | |||
| 2 | RX | ||
| 3 | TX | ||
| 4 | TX | ||
| 5 | GND | GND | GND |
| 6 | RX | ||
| 7 | TX | ||
| 8 | RX | ||
| 9 | |||
| Boema-kepe bo le bong RS-422/ 485 | ||
| Pin # | RS-422 | RS-485 |
| 1 | ||
| 2 | TxD+ | TxD+/ RxD+ |
| 3 | RxD+ | |
| 4 | RxD- | |
| 5 | GND | GND |
| 6 | ||
| 7 | ||
| 8 | TxD- | TxD-/ RxD- |
| 9 | ||
Boema-kepe ba COM1
Mokhoa oa ts'ebetso oa boema-kepe ba COM1 (RS-232/422/485), sekhahla sa polao le
ho felisoa ho ka behoa ho BIOS.
| COM1 | |||
| Pin # | Mokhoa oa RS-232 | Mokhoa oa RS-422 | Mokhoa oa RS-485 (Tsela tse peli 485) |
| 1 | DCD | ||
| 2 | RX | 422 TXD+ | 485 TXD+/RXD+ |
| 3 | TX | 422 RXD+ | |
| 4 | DTR | 422 RXD- | |
| 5 | GND | GND | GND |
| 6 | DSR | ||
| 7 | RTS | ||
| 8 | CTS | 422 TXD- | 485 TXD-/RXD- |
| 9 | RI | ||
Konopo ea matla ke sesebelisoa se sa ts'oaroang bakeng sa ts'ebetso ea ATX ea ho tima / ho tima. Tobetsa ho bulela sistimi, PWR LED e lokela ho bonesa le ho tima, o ka fana ka taelo ea ho koala ho OS, kapa o tobetsa konopo ea matla feela. Ha sistimi e ema, o ka tobetsa le ho tšoara konopo ea matla ka metsotsoana e 5 ho qobella ho tima sistimi.
Ka kopo elelloa hore ho na le nako ea metsotsoana e 5 pakeng tsa ts'ebetso ea ho tima / ho tima (ke hore hang ha o tima sistimi, o tla hloka ho ema metsotsoana e 5 ho qala ts'ebetso e 'ngoe ea ho kenya matla).
Ho buloa ha Antenna ea SMA
Sistimi e fana ka menyetla e meraro ea li-antenna tsa SMA tse boloketsoeng lits'ebetso tsa li-antenna tsa SMA. Basebelisi ba ka nka advantage ea menyetla ena e meraro ha u kenya mojule oa mini-PCIe bakeng sa kamohelo ea puisano e se nang mohala joalo ka 3G, 4G, GPS kapa WiFi.
E behiloe karolong e ka morao (e khahlano le phanele ea IO), e bonts'itsoeng ke , konopo ea CMOS Reset e sebelisetsoa ho seta boto ea bo-mme BIOS haeba sistimi e ema kapa e sa sebetse hantle. Ho qoba ts'ebetso e sa lebelloang, e behiloe ka boomo ka morao ho phanele. Ho seta bocha, ka kopo sebelisa ntlha ea pene, tobetsa 'me u tšoare bonyane metsotsoana e 5 ho seta BIOS bocha.
Ho kenngoa ha DIN-rail
a. Ho kenya, boloka sekotwana sa terene sa DIN karolong e ka morao ea sebaka se koaletsoeng u sebelisa li-screws tsa M4 tse fanoeng.
b. Ho kenya sekotwana sa seporo sa DIN seporong sa DIN, o tlameha ho tla kaholimo ho seporo sa DIN, o sekame, o koahele sekotwana sa sekotwana sa seporo sa DIN seporong sa DIN pele, ebe o tobetsa ka tieo karolo e ka pele ea seporo. ho koalla ntlha e tlase ea mount plate.
Litokomane / Lisebelisoa
 |
NEOUSYS POC-700 Series Ultra Compact Embedded Computer [pdf] Tlhophiso Tataiso POC-700 Series, POC-700 Series Ultra Compact Embedded Computer, Ultra Compact Embedded Computer, Compact Embedded Computer, Embedded Computer, Computer |
