NEOMITIS PRG7 7 Letsatsi la Bobeli Channel Digital Programmer

Tlhahisoleseding ya Sehlahiswa

PRG7 7 Day Two Channel Digital Programmer

PRG7 ke lenaneo la dijithale le etselitsoeng ho laola lisebelisoa tsa ho futhumatsa. E na le liteishene tse peli mme e lumella ho etsa mananeo ho fihlela matsatsi a 7 esale pele. Sehlahisoa se tla le poleiti ea ho kenya leboteng bakeng sa ho kenya habonolo.

Litlhaloso tsa Tekheniki

• Phepelo ea motlakase: 220V-240V ~ 50Hz
• Boholo Mojaro: 6A

Pakete Tse ka Hare

• 1 x PRG7 Sehlophisi
• 1 x Letlapa le tloaelehileng la lebota
• 2 x Screw Ankora
• 2 x Likokoana-hloko

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho Hlophisoa ha Letlapa la ho Beha Lebota:

1. Hlakola li-screws tse 2 tse ka tlas'a moqapi oa lenaneo ho e lokolla.
2. Tlosa letlapa la lebota ho moetsi oa lenaneo.
3. Sireletsa wall plate leboteng u sebelisa li-screw tse fanoeng 'me u li lekanye le masoba a tšekaletseng le a betlileng.
4. Haeba ho hlokahala hore ho behoe holim'a metsi, sebelisa sebaka sa ho kokota se fanoeng holim'a poleiti ea lebota le sebaka se tsamaisanang le sona.

Wiring:

Hlokomela: Mosebetsi oohle oa ho kenya motlakase o lokela ho etsoa ke setsebi sa motlakase se tšoanelehang kapa motho ea nang le bokhoni.
Netefatsa hore phepelo ea mantlha ea sistimi e qheletsoe ka thoko pele o tlosa kapa o kenya sesebelisoa hape mokokotlong.
Lithapo tsohle li tlameha ho tsamaellana le melaoana ea IEE 'me li lokela ho ba tse tsitsitseng feela.

Lihokelo tse latelang tsa wiring li hlalositsoe:

Theminale	Khokahano
N	E sa nke lehlakore IN
L	Phela IN
1	HW/Z2: Tlhahiso e tloaelehileng e haufi
2	CH/Z1: Tlhahiso e tloaelehileng e haufi
3	HW/Z2: Tlhahiso e tloaelehileng e bulehileng
4	CH/Z1: Tlhahiso e tloaelehileng e bulehileng

Ho kenngoa ha Sebapali:

1. Beha sebatli morao holim'a lebota la poleiti.
2. Sireletsa sebatli ka ho phunya li-screws ka bobeli tse notlelang tse ka tlas'a sebatli.

Litlhophiso tsa Sets'oants'o:

Ho fihlella li-setting tsa li-installer tse tsoetseng pele, suthisa li-slider tsa mekhoa e 'meli sebakeng sa ho tima.
Ka kopo sheba bukana e felletseng ea mosebelisi bakeng sa litaelo le tlhaiso-leseling e batsi.

KANANELO MATS'ELI

KEKETSO

HO PHETHA LEBOTA MOUTING PLATE

Lenaneo la dijithale le tsitsitse leboteng ka poleiti ea lebota e fanoang ka sehlahisoa.

1. Hlakola li-screws tse 2 tlas'a moqapi oa lenaneo.
2. Tlosa letlapa la lebota ho moetsi oa lenaneo.
3. Sireletsa wall plate ka likurufu tse peli tse fanoeng u sebelisa masoba a tšekaletseng le a emeng.
4. Tabeng ea ho phahamisa holim'a metsi, ho fanoa ka sebaka sa ho kokota leboteng la lebota le sebakeng se lumellanang sa moqapi oa lenaneo.

KHOPO

• Mesebetsi eohle ea ho kenya motlakase e lokela ho etsoa ke Setsebi sa Motlakase se tšoanelehang hantle kapa motho e mong ea nang le bokhoni. Haeba o sa tsebe hantle hore na o ka kenya lenaneo lena joang, buisana le setsebi sa motlakase se tšoanelehang kapa se futhumatsang Enjineer. Se ke oa tlosa kapa oa lokisa sesebelisoa holim'a plate e ka morao ntle le hore phepelo e kholo ea sistimi e qheleloe ka thoko.
• Lithapo tsohle li tlameha ho tsamaellana le melaoana ea IEE. Sehlahisoa sena ke sa wiring e tsitsitseng feela.

Wiring ka hare

• N = E sa nke lehlakore IN
• L = Phela IN

1. HW/Z2: Tlhahiso e tloaelehileng e koaletsoeng
2. CH/Z1: Tlhahiso e tloaelehileng e koaletsoeng
3. HW/Z2: Tlhahiso e tloaelehileng e bulehileng
4. CH/Z1: Tlhahiso e tloaelehileng e bulehileng

Litšoantšo tsa lithapo

tsamaiso ea boema-kepe

tsamaiso ea boema-kepe

PHETHA MOHLOMI

1. Beha sebatli sebakeng sa "programmer" ho "mounting plate" leboteng.
2. Sireletsa sebatli ka ho phunya li-screws ka bobeli tse notlelang tlas'a sebatli.

LIEKETSENG MOEKETSI

TSOHLE SEBAKA TSA MOHLOLI

Phihlello

• Tsamaisa li-slider tsa mokhoa oa 2 ho tloha moo u leng teng.
• Tsamaisa selaete sa lenaneo ho boemo.
• Tobetsa ka nako e le 'ngoe le metsotsoana e 5.
• Li-setting tse 5 tse tsoetseng pele li ka fetoloa.
• Tobetsa ho fihlela khetho e nepahetseng e hlaha, ebe u sebelisa kapa ho khetha khetho ea hau.

Ho beha nomoro/Tlhaloso

1. Khetha mokhoa oa khoheli/pumped
2. Beha oache ea lihora tse 12 kapa tse 24
3. Ho kenya tšebetsong phetoho ea Auto Lehlabula/Mariha
4. Beha palo ea linako tsa HO ON/OFF
5. Khetha sistimi ea hau lipakeng tsa Z1/Z2 kapa CH/HW
6. Ts'ebetso ea backlight

• Matla a khoheli/Mokhoa oa Pumped (1)
• Sistimi e seng e setiloe ke Pumped.
• Tobetsa kapa ho fetolela Gravity (2).

1. E pompetsoe
2. Matla a khoheli
3. Ebe u boloka ka ho tsamaisa slide sa programming kapa boloka ebe u ea ho setting e latelang ka ho tobetsa .

Beha oache ea lihora tse 12/24 (2)

• Theko e behiloeng esale pele ke lihora tse 12.

1. Tobetsa kapa ho fetolela ho "24h".
2. Ebe u boloka ka ho tsamaisa slide sa programming kapa boloka ebe u ea ho setting e latelang ka ho tobetsa.

Phetoho ea Lehlabula / Mariha ho feta (3)

Phetoho ea Auto Lehlabula / Mariha ka lebaka la kamehla e ON.

1. Tobetsa kapa ho fetohela ho TIMA
2. Ebe u boloka ka ho tsamaisa slide sa programming kapa boloka ebe u ea ho setting e latelang ka ho tobetsa.

Beha palo ea linako tsa ON/OFF (4)

O ka fetola palo ea linako tse fetohang tsa ON/OFF. Nomoro e behiloeng esale pele ke 2.

1. Tobetsa kapa ho fetola linako tse 3.
2. Ebe u boloka ka ho tsamaisa slide sa programming kapa boloka ebe u ea ho setting e latelang ka ho tobetsa .

Ts'ebetso ea ho kenya (5)

Lenaneo la dijithale le ka tsamaisa Heating e Bohareng le Metsi a Chesang kapa libaka tse 2. Khetho e seng e setiloe ke CH/HW.

1. Tobetsa kapa ho fetolela ho Z1/Z2.
2. Ebe u boloka ka ho tsamaisa slide sa programming kapa boloka ebe u ea ho setting e latelang ka ho tobetsa .

Hlokomela mabapi le li-setting tsa Advanced installer: Haeba slider ea programming e tlositsoe, e tla boloka liphetoho ebe e tsoa ka mokhoa oa ho kenya.

Lebone le ka morao (6)

Lebone le ka morao le ka tima. Theko e seng e setiloe ke ON.

1. Tobetsa kapa ho fetohela ho TIMA.
2. Ebe u boloka ka ho tsamaisa slide sa programming kapa boloka ebe u ea ho setting e latelang ka ho tobetsa .

LIEKETSENG MOKHOPO

• Phepelo ea matla: 220V-240V/50Hz.
• Sephetho ka relay: 3(2)A, 240V/50Hz.
• E lekantsoe tšusumetso voltage: 4000v.
• Khokahano e nyane: Mofuta oa 1B.
• Tekanyo ea tšilafalo: 2.
• Ketso e iketsang: Lipotoloho tse 100,000.
• Sehlopha sa II.

Tikoloho:

• Thempereichara ea ts'ebetso: 0°C ho ea +40°C.
• Mocheso oa polokelo: ho tloha -20°C ho ea ho +60°C.
• Mongobo: 80% ho +25°C (ntle le condensation)
• Lintlha tsa ts'ireletso: IP30.
• Phatlalatso ea UKCA ea tumellano: Rona, Neomitis Ltd, ka hona re phatlalatsa tlas'a boikarabello ba rona hore lihlahisoa tse hlalositsoeng litaelong tsena li lumellana le lisebelisoa tsa molao 2016 No.1101 (Melao ea polokeho ea Thepa ea Motlakase), 2016 No.1091 (Electromagnetic Compatibility Regulations) , 2012 n°3032 ( ROHS) le ho latela litekanyetso tse khethiloeng:
• 2016 No.1101 (Tshireletso): EN 60730-1:2011, EN 60730-2-7:2010/
• AC:2011, EN 60730-2-9:2010, EN 62311:2008
• 2016 No.1091 (EMC): EN 60730-1:2011 / EN 60730-2-7:2010/AC:2011 / EN 60730-2-9:2010
• 2012 n°3032 (ROHS): EN IEC 63000:2018
• Neomitis Ltd: 16 Great Queen Street, Covent Garden, London, WC2B 5AH UNITED KINGDOM – contactuk@neomitis.com
• Phatlalatso ea EU ea tumellano: Rōna, Imhotep Creation, ka hona re phatlalatsa tlas'a boikarabelo ba rona hore lihlahisoa tse hlalositsoeng litaelong tsena li lumellana le lipehelo tsa Litaelo le litekanyetso tse lumellanang tse thathamisitsoeng ka tlase:
• Sehlooho sa 3.1a (Tshireletso): EN60730-1:2011/ EN60730-2-7: 2010/EN60730-2-9: 2010/ EN62311:2008
• Sehlooho sa 3.1b (EMC): EN60730-1:2011/ EN60730-2-7: 2010/ EN60730-2-9: 2010
• RoHS 2011/65/UE, e fetotsoe ke Litaelo 2015/863/UE & 2017/2102/UE : EN IEC 63000:2018
• Pōpo ea Imhotep: ZI Montplaisir - 258 Rue du champ de courses – 38780 Pont-Evêque – France – contact@imhotepcreation.com
• Neomitis Ltd le Imhotep Creation ke tsa Axenco Group.
• Letšoao , le khomaretsoeng sehlahisoa le bontša hore u tlameha ho se lahla qetellong ea nako ea bophelo ba sona sebakeng se khethehileng sa ho sebelisoa hape, ho latela European Directive WEEE 2012/19/EU. Haeba u e nkela sebaka, u ka boela ua e khutlisetsa ho morekisi eo u rekang thepa e ncha ho eona. Kahoo, hase litšila tse tloaelehileng tsa ka tlung. Ho tsosolosa lihlahisoa ho re thusa ho sireletsa tikoloho le ho sebelisa mehloli e fokolang ea tlhaho.

FEELAVIEW

• Rea leboha ka ho reka PRG7 ea rona, lenaneo la matsatsi a 7 la digital.
• Ke ka ho mamela litlhoko tsa hau tseo re li entseng le ho rala lihlahisoa tsa rona hore li be bonolo ho li sebetsa le ho li kenya.
• Ke boiketlo bona ba ts'ebetso bo reretsoeng ho nolofatsa bophelo ba hau le ho u thusa ho boloka matla le chelete.

MOLAOLI LE BONTŠA

Moetsi oa mananeo

Tatelano ea li-slider tsa mananeo:
Nako CH/Z1 lenaneo HW/Z2 lenaneo Run

Pontšo ea LCD

LIEKETSENG

NTHATISI MATLA

1. Fetola phepelo ea motlakase ea programmer.
   • Matšoao ohle a tla hlahisoa skrineng sa LCD joalo ka ha ho bonts'itsoe metsotsoana e 'meli.
2. Kamora metsotsoana e 2, LCD e tla bonts'a:
   • Nako le letsatsi la kamehla
   • Matha aekhone e tiile
   • Litsamaiso tsa CH le HW li TIMA

Hlokomela: Sesupo sa boemo ba betri bo tlase e tla hlaha skrineng ha betri e tlameha ho fetoloa.
Hopola ho isa libeteri tse sebelisitsoeng sebakeng sa pokello ea betri hore li ka sebelisoa hape.

TS'ELISO

Hlokomela: Yuniti e se e behiloe ka letsatsi le nako e nepahetseng. Haeba moetsi oa lenaneo a ka hloka ho seta bocha ka lebaka lefe kapa lefe, ka kopo bona litaelo tse leqepheng la 3.

BEHA LENANEO LA CH/Z1 LE HW/Z2

1. Tsamaisa selaete sa Programming sebakeng. Matsatsi ohle a beke a tiile. Underscore le Ee/Che lia phatsima.
2. Tobetsa ha o batla ho beha letsatsi le leng la beke. Underscore e tsamaea ka tlase ho matsatsi a mang. Ebe o tobetsa ho hlophisa letsatsi le hatisitsoeng.
3. Tobetsa kapa ho eketsa/fokotsa nako ya ho qala ya Ho tima/Ho tima. Ebe o tobetsa ho netefatsa.
4. Tobetsa kapa ho eketsa/fokotsa nako ea ho qetela ea On/Off. Ebe o tobetsa Ee ho netefatsa.
5. Pheta nako ea bobeli ea On/Off le bakeng sa nako ea boraro ea On/Off. (Ka kopo, sheba litlhophiso tse tsoetseng pele tsa sehokelo mabapi le litaelo tsa ho Tsebahatsa ho nolofalletsa nako ea boraro ea On/Off).

Linako tsa On/Off	Kemiso ea kamehla
Litlhophiso tse peli tsa linako tsa On/Off
Nako ea 1	Qala ka 06:30 hoseng	Qetella ka 08:30 hoseng
Nako ea 2	Qala ka 05:00 mantsiboea	Qetela ka 10:00 pm
Litlhophiso tse tharo tsa linako tsa On/Off
Nako ea 1	Qala ka 06:30 hoseng	Qetella ka 08:30 hoseng
Nako ea 2	Qala ka 12:00 mantsiboea	Qetela ka 02:00 pm
Nako ea 3	Qala ka 05:00 mantsiboea	Qetela ka 10:00 pm

• Lenaneo la hona joale le ka kopitsoa matsatsing a latelang. Tobetsa E ho kopitsa kapa Che ho itlhophisa ka letsoho letsatsing le hlahlamang.
• Tsamaisa selaete sa lenaneo ho beha boemo ba ho netefatsa le ho hlophisa kanale ea bobeli.
• Pheta mohato o fetileng oa nako ea On/Off bakeng sa HW/Z2.
• Ha o qetile, suthisa selaete sa lenaneo sebakeng sa ho netefatsa.

TŠEBELETSO

KHETHO EA MOKHOA LE TLHALOSO

• Tatelano ea li-slider tsa CH/Z1 le HW/Z2: Kamehla ho tima letsatsi lohle
• Kamehla: Mokhoa o sa feleng oa ON. Sistimi e buletsoe ruri
• Letsatsi lohle: Sistimi e bulela ho tloha ea pele
• Nako ea ho qala ha nako ho fihlela nako ea ho qetela ea Off ea letsatsi la hajoale.
• Auto: Mokhoa o itekanetseng. Yuniti e laola lenaneo le khethiloeng (sheba karolo ea "Programming" leqepheng la 2).
• E tima: Permanent Off mode. Sistimi e lula e Off ka ho sa feleng. Mokhoa oa boost o ntse o ka sebelisoa.

KHOTHATSO

BOOTS: Boost mode ke mokhoa oa nakoana o o lumellang hore o bulele lihora tse 1, 2 kapa 3. Qetellong ea nako e behiloeng, sesebelisoa se tla khutlela boemong ba sona ba pele.

• BOOST e tla sebetsa ho tsoa maemong afe kapa afe a ho sebetsa.
• BOOST e kenngoa ka ho tobetsa konopo bakeng sa tsamaiso e lumellanang (CH / Z1 kapa HW / Z2).
• Tobetsa 1 nako ho beha 1 hora, makhetlo a 2 ho beha lihora tse 2 le linako tse 3 ho beha lihora tse 3.
• BOOST e hlakotsoe ka ho tobetsa hape ho Boost kapa motsamao oa li-slider.
• Ha BOOST e sebetsa pheletso ea nako ea Boost e bontšoa bakeng sa sistimi ka 'ngoe.

Hlokomela:

• Slider ea Programming e tlameha ho ba maemong.
• Ho tla ba le tieho e nyane lipakeng tsa ho tobetsa le ho kenya tšebetsong relay.

PUSELETSO

• Tsoela pele: Boemo ba pele ke mokhoa oa nakoana o o lumellang ho bulela sistimi esale pele, ho fihlela nako ea ho qetela ea On/Off e latelang.
• Tobetsa konopo ea kanale e tsamaellanang ho kenya tšebetsong mokhoa ona.
• Tobetsa konopo hape ho e tima pele e fela.

LETSATSI LETSATSI

• Matsatsi a phomolo: Mokhoa oa matsatsi a phomolo o lumella ho tima mocheso (kapa Z1) le metsi a chesang (kapa Z2) ka matsatsi a itseng, a ka fetohang pakeng tsa matsatsi a 1 le a 99.

Ho theha mosebetsi oa matsatsi a phomolo:

1. Tobetsa konopo ea Letsatsi bakeng sa metsotsoana e 5.
2. OFF e hlaha skrineng. Tobetsa kapa ho eketsa kapa ho fokotsa palo ya matsatsi.
3. Ebe o tobetsa ho netefatsa. ho futhumatsa (kapa Z1) le metsi a chesang (kapa Z2) ho tima 'me palo ea matsatsi a setseng e tla theoha ha e bontšoa.
4. Ho hlakola tšebetso ea matsatsi a phomolo, tobetsa konopo.

REVIEW

Review: Review mode lumella ho review mananeo ohle ka nako e le 'ngoe. Monoview e qala ho tloha qalong ea beke mme mohato o mong le o mong o hlaha metsotsoana e meng le e meng e 2.

Tobetsa konopo ho qala lenaneo botjhaview.
Tobetsa hape ho khutlela mokhoeng o tloaelehileng oa ts'ebetso.

LIEKETSENG FEEKE

Li-setting Li-setting tsa fektheri

• Litlhophiso tse peli tsa linako tsa On/Off
• Nako ea 1 Qala ka 06:30 hoseng Qetella ka 08:30 hoseng
• Nako ea 2 Qala ka 05:00 pm Qetella ka 10:00 mantsiboea
  • Litlhophiso tse tharo tsa linako tsa On/Off
• Nako ea 1 Qala ka 06:30 hoseng Qetella ka 08:30 hoseng
• Nako ea 2 Qala ka 12:00 pm Qetella ka 02:00 mantsiboea
• Nako ea 3 Qala ka 05:00 pm Qetella ka 10:00 mantsiboea

Hlokomela: Ho khutlisetsa li-setting tsa feme, tobetsa 'me u hatelle karolo ena ho feta metsotsoana e 3 u sebelisa ntlha ea pene.

Lipontšo tsohle tsa LCD li tla buloa ka metsotsoana ea 2 'me litlhophiso tsa fektheri li tla tsosolosoa.

BEHA LETSATSI LE TSHOCHE

1. Tsamaisa selaete sa Programming sebakeng. Selemo se behiloeng esale pele se tiile.
2. Ho khetha selemo sa hajoale, tobetsa , ho eketsa selemo. Tobetsa , ho fokotsa selemo.
   • Tobetsa ho netefatsa le ho seta khoeli ea hajoale.
3. Khoeli e behiloeng esale pele ea hlaha. Tobetsa ho eketsa khoeli. Tobetsa ho fokotsa khoeli.
4. Letsatsi le behiloeng esale pele lea hlaha. Tobetsa ho eketsa letsatsi. Tobetsa ho fokotsa letsatsi.

• Tobetsa ho netefatsa le ho seta letsatsi la hajoale.
• Tobetsa ho netefatsa le ho seta oache.
• 01 = Pherekhong; 02 = Hlakola; 03 = Hlakubele; 04 = Mmesa; 05 = Motšeanong;
• 06 = Phuptjane; 07 = Phupu; 08 = Phato; 09 = Loetse; 10 = Mphalane;
• 11 = Pulungoana; 12 = December
• Nako e behiloeng esale pele ea hlaha. Tobetsa ho eketsa nako. Tobetsa ho fokotsa nako
• Tsamaisa selaete sa lenaneo sebakeng sefe kapa sefe ho netefatsa/qeta tlhophiso ena.

HO BATLE PHOSO

Pontšo e nyamela ho moetsi oa lenaneo:

• Sheba phepelo ea li-fused spur.

Ho futhumatsa ha ho tle:

• Haeba lebone la CH Indicator le ntse le khantšitsoe joale ho ke ke ha etsahala hore ebe phoso ho moetsi oa lenaneo.
• Haeba lebone la CH le SEBELE, hlahloba lenaneo ebe o leka BOOST kaha sena se lokela ho sebetsa maemong afe kapa afe.
• Sheba hore thermostat ea kamore ea hau e hloka mocheso.
• Hlahloba hore na boiler e butse.
• Etsa bonnete ba hore pompo ea hau e sebetsa.
• Etsa bonnete ba hore valve ea hau ea motorized haeba e kentsoe e butsoe.

Metsi a chesang ha a kene:

• Haeba lebone la HW Indicator le butse, ho ka etsahala hore ebe ha ho na phoso ho moetsi oa lenaneo.
• Haeba lebone la HW indicator le SA BUA, hlahloba lenaneo joale leka BOOST kaha sena se lokela ho sebetsa sebakeng sefe kapa sefe.
• Etsa bonnete ba hore Cylinder thermostat ea hau e hloka mocheso.
• Hlahloba hore na boiler e butse.
• Etsa bonnete ba hore pompo ea hau e sebetsa.
• Etsa bonnete ba hore valve ea hau ea motorized haeba e kentsoe e butsoe.
• Haeba bothata bo ntse bo tsoela pele ikopanye le setsi sa hau.

LIEKETSENG MOKHOPO

Ka kopo sheba litaelo tsa ho kenya bakeng sa tlhahisoleseling efe kapa efe mabapi le maemo le tikoloho ea pro-duct.

HLOKOMELA

• Ka linako tse ling yuniti e ka be e setiloe ka ts'ebetso ea nako ea ts'ebeletso e lumelletsoeng. Ho ea ka Molao sebakeng sa bolulo se hiriloeng, boiler ea hau ea khase e lokela ho hlahlojoa/sebelisoa selemo le selemo ho netefatsa hore e sebetsa hantle.
• Khetho ena e etselitsoe ho hopotsa mosebeletsi oa ho qetela ho ikopanya le motho ea amehang hore tšebeletso ea selemo le selemo e etsoe ka boiler.
• Ts'ebetso ena e tla nolofalloa le ho hlophisoa ke Motlatsi oa hau, Moenjiniere oa tlhokomelo, kapa Mong'a Ntlo.
• Haeba e behiloe ho etsa joalo, yuniti e tla hlahisa molaetsa skrineng ho u hopotsa hore tšebeletso ea boiler e loketse.
• Ho tla bontšoa matsatsi a 50 pele tšebeletso e fana ka nako ea ho lokisetsa hore moenjiniere a be teng, mesebetsi e tloaelehileng e tla tsoelapele nakong ena.tage.
• Qetellong ea ts'ebeletso ena e tlang haufinyane, yuniti e tla ea Tšebeletsong e Dueeng OFF moo nako ea 1hour feela e tla sebetsa ho TMR7 le PRG7, haeba yuniti e le thermostat RT1/RT7, e tla sebetsa ho 20 ° C nakong ea hora ena.
• Haeba PRG7 RF, Thermostat ha e na tšebetso.

MOHLOMI KE ENG?

Tlhaloso Bakeng sa Beng ba Matlo. Li-Programmers li u lumella ho beha linako tsa 'On' le 'Off'. Mefuta e meng e bulela le ho tima metsi a chesang a bohareng ka nako e le 'ngoe, ha e meng e lumella metsi a chesang a lapeng le ho futhumatsa ho kena le ho tima ka linako tse fapaneng. Beha linako tsa 'Ot' le 'Off' hore li lumellane le mokhoa oa hau oa bophelo. Ho li-programme tse ling u tlameha ho seta hore na u batla hore metsi a futhumatsang le a chesang a tsoele pele ho sebetsa, u tsamaee tlas'a linako tsa ho futhumatsa tsa 'On' le 'Off', kapa u tingoe ka ho feletseng. Nako e ho moetsi oa lenaneo e tlameha ho ba e nepahetseng. Mefuta e meng e tlameha ho lokisoa nakong ea selemo le hoetla liphetohong tse lipakeng tsa nako ea Greenwich Mean Time le ea Brithani ea Lehlabula. U ka khona ho lokisa ka nakoana lenaneo la ho futhumatsa, mohlalaample, 'Advance', kapa 'Boost'. Tsena li hlalositsoe litaelong tsa moetsi. Mocheso o ke ke oa sebetsa haeba thermostat ea kamore e tima mocheso. 'Me, haeba u na le cylinder ea metsi a chesang, mocheso oa metsi o ke ke oa sebetsa haeba cylinder thermostat e lemoha hore metsi a chesang a fihlile mocheso o nepahetseng.

• www.neomitis.com
• NEOMITIS® LIMITED – 16 Great Queen Street, Covent Garden, London, WC2B 5AH UNITED KINGDOM E Ngolisitsoe Engelane le Wales Nomoro: 9543404
• Mohala: +44 (0) 2071 250 236 – Fax: +44 (0) 2071 250 267 – E-mail: contactuk@neomitis.com
• Matšoao a ngolisitsoeng - Litokelo tsohle li sirelelitsoe

Litokomane / Lisebelisoa

NEOMITIS PRG7 7 Letsatsi la Bobeli Channel Digital Programmer [pdf] Buka ea Taelo PRG7 7 Day Two Channel Digital Programmer, PRG7, 7 Day Two Channel Digital Programmer, Two Channel Digital Programmer, Digital Programmer, Programmer

Litšupiso

• Bukana ea Mosebelisi