MPG Z790 EDGE WIFI DDR4
Motherboard
Bukana ea Mosebelisi

MPG Z790 EDGE WIFI DDR4 Motherboard

Qala ka Potlako
Rea leboha ha u rekile boardboard e ncha ho MSI®. Karolo ena ea ho Qala ka Potlako e fana ka litšoantšo tse bontšang mokhoa oa ho kenya komporo ea hau. Tse ling tsa lits'ebetso li boetse li fana ka lipontšo tsa video. Ka kopo, hokela ho URL ho e shebella le web sebatli fonong kapa tafoleng ea hau. U kanna ua ba le lihokelo tsa URL ka ho hlahloba khoutu ea QR.

Ho Lokisetsa Lisebelisoa le Lisebelisoa

Boitsebiso ba Tšireletseho

• Likarolo tse kenyellelitsoeng ka har'a sephutheloana sena li na le tšekamelo ea ho senyeha ho tloha ho tsoa ha electrostatic (ESD). Ka kopo latela litaelo tse latelang ho netefatsa kopano e atlehileng ea komporo.
• Netefatsa hore likarolo tsohle li hokahane ka mokhoa o sireletsehileng. Lihokelo tse hlephileng li ka etsa hore komporo e se ke ea lemoha karolo e itseng kapa e hlolehe ho qala.
• Tšoara motherboard ka mathōko ho qoba ho ama likarolo tse bonolo.
• Ho kgothaletswa ho roala leqhoele la letsoho la electrostatic discharge (ESD) ha o tšoara motherboard ho thibela tšenyo ea motlakase. Haeba lebanta la letsoho la ESD le le sieo, ntša motlakase o tsitsitseng ka ho ama ntho e 'ngoe ea tšepe pele u tšoara motherboard.
• Boloka lebokose la li-motherboard ka har'a sets'oants'o sa electrostatic shielding kapa holim'a anti-static pad neng kapa neng ha board ea mama e sa kengoa.
• Pele o bulela komporo, etsa bonnete ba hore ha ho na li-screw tse hlephileng kapa likarolo tsa tšepe lebotong la bo-mme kapa kae kapa kae ka har'a mokotla oa komporo.
• Se ke oa qalisa komporo pele instola e phethoa. Sena se ka baka tšenyo e sa feleng ea likarolo hammoho le kotsi ho mosebelisi.
• Haeba o hloka thuso nakong ea mohato ofe kapa ofe oa ho instola, ka kopo ikopanye le setsebi sa khomphutha se netefalitsoeng.
• Kamehla tima motlakase 'me u lokolle thapo ea motlakase sebakeng sa motlakase pele o kenya kapa o ntša karolo efe kapa efe ea komporo.
• Boloka bukana ena ea mosebelisi bakeng sa tšebeliso ea nako e tlang.
• Boloka letlapa lena le le hole le mongobo.
• Etsa bonnete ba hore motlakase oa hau o fana ka matla a tšoanangtage joalo ka ha ho bonts'itsoe ho PSU, pele o hokela PSU sebakeng sa motlakase.
• Beha thapo ea motlakase ka tsela eo batho ba ke keng ba e hata. U se ke ua beha letho holim'a thapo ea motlakase.
• Litlhokomeliso tsohle le litemoso tse ho motherboard li lokela ho hlokomeloa.
• Haeba ho ka hlaha a mang a maemo a latelang, etsa hore board ea mamabo e hlahlojoe ke basebeletsi ba ts'ebeletso:
• Mokelikeli o phunyeletse ka har'a komporo.
• Letlapa la li-motherboard le kentsoe mongobo.
• Letlapa la bo-mme ha le sebetse hantle kapa o ka se khone ho le sebetsa ho latela tataiso ea mosebelisi.
• Letlapa la bo-mme le theohile ebile le senyehile.
• Letlapa la bo-mme le na le letšoao le hlakileng la ho robeha.
• Se ke oa tlohela motherboard ena tikolohong e ka holimo ho 60°C (140°F), e ka senya motherboard.

Tsebiso ea ho ema ha nyeoe

Ho thibela tšenyo ea lebokose la li-motherboard, ho haneloa ho ema ho sa hlokahaleng ho emisa pakeng tsa li-circuits tsa li-motherboard le k'hese ea komporo. The case standoff tsoela pele
matšoao a kantle a tla tšoauoa ka lehlakoreng le ka morao la boardboard (joalo ka ha ho bonts'itsoe ka tlase) ho sebetsa joalo ka temoso ho mosebelisi.
Qoba tsebiso ea ho thulana
Pente e sireletsang e hatisoa ho pota-potile lesoba le leng le le leng la screw ho thibela likarolo tse ling hore li se ke tsa ngolisoa.

Ho kenya processor

∙ https://youtu.be/KMf9oIDsGes

Ho kenya memori ea DDR4

https://youtu.be/XiNmkDNZcZk

Ho hokela Sehlooho sa Panel e ka Pele

∙ http://youtu.be/DPELIdVNZUI

Ho kenya Motherboard

∙ https://youtu.be/wWI6Qt51Wnc

Ho hokela Lihokelo tsa Matla

∙ http://youtu.be/gkDYyR_83I4

Ho kenya SATA Drives

∙ http://youtu.be/RZsMpqxythc

Ho kenya Karete ea Litšoantšo

∙ http://youtu.be/mG0GZpr9w_A

Ho hokahanya lisebelisoa tsa peripheral

Litlhaloso

CPU	∙ E ts'ehetsa li-processor tsa 12/13th Gen Intel® Core™, Pentium® Gold le Celeron® processors* ∙ Sokete ea processor ea LGA1700 * Ka kopo, e ea ho www.msi.com ho fumana boemo bo bocha ba tšehetso ha li-processor tse ncha li lokolloa.
Chipset	Intel® Z790 Chipset
Mohopolo	∙ 4x DDR4 memori ea slots, e tšehetsang ho fihla ho 128GB * ∙ E tšehetsa 1R 2133/2666/3200 MHz (ka JEDEC & POR) ∙ makhetlo a mangata a overclocking: • 1DPC 1R Max lebelo ho fihla ho 5333+ MHz • 1DPC 2R Max lebelo ho fihla ho 4800+ MHz • 2DPC 1R Max lebelo ho fihla ho 4400+ MHz • 2DPC 2R Max lebelo ho fihla ho 4000+ MHz ∙ E tšehetsa mokhoa oa Dual-Channel ∙ E ts'ehetsa memori e seng ea ECC, e se nang buffered ∙ E tšehetsa Intel® Extreme Memory Profile (XMP) * Ka kopo, sheba www.msi.com bakeng sa tlhaiso-leseling e batsi ka memori e tsamaellanang.
Katoloso Slots	∙ 2x PCIe x16 slots • PCI_E1 slot (Ho tsoa ho CPU) • E tšehetsa ho fihla ho PCIe 5.0 x16 • PCI_E3 slot (Ho tsoa ho Z790 Chipset) • E tšehetsa ho fihla ho PCIe 4.0 x4 ∙ 1x PCIe 3.0 x1 slot • PCI_E2 slot (Ho tsoa ho Z790 Chipset) • E tšehetsa ho fihla ho PCIe 3.0 x1
Litšoantšo tsa Onboard	∙ 1x HDMI™ 2.1 kou e nang le HDR, e tšehetsang qeto e phahameng ea 4K 60Hz*/ ** ∙ 1x Boema-kepe ba DisplayPort 1.4 bo nang le HBR3, bo tšehetsang qeto e phahameng ea 8K 60Hz*/ ** * E fumaneha feela ho li-processor tse nang le lits'oants'o tse kopaneng. ** Litlhaloso tsa Graphics li ka fapana ho latela CPU e kentsoeng.
SATA Ports	∙ 7x SATA 6Gb/s boema-kepe • SATA_1, SATA_5~6 & SATA_7~8 (Ho tloha ho Z790 chipset) • SATA_A1~A2 (Ho tloha ASM1061)
M.2 SSD Slots	∙ 5x M.2 slots (Key M) • sekotjana sa M2_1 (Ho tsoa ho CPU) • E tšehetsa ho fihla ho PCIe 4.0 x4 • E tšehetsa lisebelisoa tsa polokelo tsa 2260/ 2280/ 22110 • M2_2 & M2_5 slots (Ho tloha ho Z790 chipset) • E tšehetsa ho fihla ho PCIe 4.0 x4 • E tšehetsa lisebelisoa tsa polokelo ea 2260/2280 • M2_3* sekotjana (Ho tsoa ho chipset ea Z790) • E tšehetsa ho fihla ho PCIe 4.0 x4 • E tšehetsa ho fihlela ho SATA 6Gb/s • E tšehetsa lisebelisoa tsa polokelo tsa 2242/ 2260/ 2280 • sekotjana sa M2_4 (Ho tsoa ho chipset ea Z790) • E tšehetsa ho fihla ho PCIe 4.0 x4 • E tšehetsa lisebelisoa tsa polokelo tsa 2242/ 2260/ 2280 * SATA_1 e tla be e le sieo ha o kenya M.2 SATA SSD sebakeng sa M2_3.
HLASELLA	∙ E tšehetsa RAID 0, RAID 1, RAID 5 le RAID 10 bakeng sa lisebelisoa tsa polokelo tsa SATA * ∙ E tšehetsa RAID 0, RAID 1, RAID 5 le RAID 10 bakeng sa lisebelisoa tsa polokelo tsa M.2 NVMe * SATA_A1~A2 ha e tšehetse tšebetso ea RAID.
Audio	Realtek® ALC4080 Codec ∙ 7.1-Channel USB e Phahameng ka ho Fetisisa Audio ∙ E ts'ehetsa ho bapala ho fihla ho 32-bit/384kHz ho phanele e ka pele ∙ E tšehetsa tlhahiso ea S/PDIF
LAN	∙ 1x Intel® 2.5Gbps molaoli oa LAN
Wi-Fi & Bluetooth®	Intel® Wi-Fi 6E ∙ The Wireless module e kentsoe pele ho M.2 (Key-E) slot ∙ E tšehetsa MU-MIMO TX/RX, 2.4GHz/ 5GHz/ 6GHz*(160MHz) ho fihla ho 2.4Gbps ∙ E tšehetsa 802.11 a/ b/ g/ n/ ac/ selepe ∙ E tšehetsa Bluetooth® 5.3**, FIPS, FISMA * Wi-Fi 6E 6GHz e ka ipapisa le melawana ya naha e nngwe le e nngwe mme e tla be e lokile ho kena Windows 10 haha ​​21H1 le Windows 11. ** Bluetooth 5.3 e tla be e lokile ho kena Windows 10 haha ​​21H1 le Windows 11.
Lihokelo tsa Matla	∙ 1x 24-pin sehokelo sa matla sa ATX ∙ 2x 8-pin +12V likhokahanyo tsa matla
USB ea ka hare Lihokelo	∙ 1x USB 3.2 Gen 2 10Gbps sehokelo sa phanele sa pele sa mofuta oa C (Ho tsoa ho chipset ea Z790) ∙ 1x USB 3.2 Gen 1 5Gbps sehokelo (Ho tloha Hub GL3523) • E ts'ehetsa likou tse ling tse 2 tsa USB 3.2 Gen 1 5Gbps ∙ 2x lihokelo tsa USB 2.0 Type-A (Ho tloha Hub GL850G) • E ts'ehetsa likou tse ling tse 4 tsa USB 2.0
Lihokelo tsa Fan	∙ 1x 4-pin CPU fan sehokelo ∙ Sehokelo sa fan sa pompo ea metsi se 1x 4-pin ∙ 6x 4-pin lihokelo tsa fan system
Lihokelo tsa Tsamaiso	∙ 1x sehokelo sa molumo oa phanele e ka pele ∙ 2x Lihokelo tsa phanele ea sistimi ∙ 1x sehokelo sa ho kenella ha Chassis ∙ 1x sehokelo sa module oa TPM ∙ 1x sehokelo sa taolo ea Tuning ∙ 1x sehokelo sa TBT (se tšehetsa RTD3)
Fetoha	∙ 1x EZ LED Control switch
Li-Jumpers	∙ 1x Tlosa jumper ea CMOS ∙ 1x OC safe boot jumper
Likarolo tsa LED	∙ 1x 4-pin RGB LED sehokelo sa LED ∙ 3x 3-pin ARGB Gen2 lihokelo tsa LED ∙ 4x EZ Debug LED ∙ 1x sehokelo sa Demo sa LED
Panel ea ka morao Lihokelo	∙ 1x DisplayPort ∙ 1x boema-kepe ba HDMI™ ∙ 1x Hlakola konopo ea CMOS ∙ 1x konopo ea Flash BIOS ∙ 4x USB 3.2 Gen 1 5Gbps Type-A ports (Ho tloha Hub GL3523) ∙ 4x USB 3.2 Gen 2 10Gbps Type-A ports (Ho tloha ho chipset ea Z790) ∙ 1x USB 3.2 Gen 2 10Gbps boema-kepe ba Mofuta oa C (Ho tloha ho chipset ea Z790) ∙ 1x USB 3.2 Gen 2×2 20Gbps Type-C port (Ho tloha ho chipset ea Z790) ∙ 1x 2.5Gbps LAN (RJ45) jack ∙ 2x lihokelo tsa antenna tsa Wi-Fi ∙ Li-jacks tsa audio tse 5x ∙ 1x sehokelo sa Optical S/PDIF Out
Molaoli oa I/O	NUVOTON NCT6687D-M Molaoli Chip
Hardware hlokomela	∙ CPU/ Sistimi/ Ho lemoha mocheso oa Chipset ∙ CPU/ Sistimi/ Ho lemoha lebelo la fan ∙ CPU/ Sistimi/ Taolo ea lebelo la fan
Sebopeho sa Foromo	∙ ATX Foromo Factor ∙ 9.6 in. x 12 in. (244 mm x 305 mm)
Likarolo tsa BIOS	∙ 1x 256 Mb flash ∙ UEFI AMI BIOS ∙ ACPI 6.4, SMBIOS 3.5 ∙ Lipuo tse ngata
Software	∙ Bakhanni ∙ Setsi sa MSI ∙ Intel Extreme Tuning Utility ∙ Realtek Console ∙ CPU-Z MSI GAMING ∙ Norton 360 Deluxe ∙ 7-ZIP ∙ AIDA64 Extreme - Khatiso ea MSI ∙ MSI APP Player (BlueStacks) ∙ Tile

Likarolo Tse Khethehileng

Likarolo tsa Setsi sa MSI

• Mokhoa oa Papali
• Bohlokoa ba Bohlale
• Lintlha-khōlō Tsa Papali
• Leseli la mohlolo
• Ambient Link
• Frozr AI Ho Phola
• Mosebelisi Scenario
• 'Mala oa 'Nete
• Live Update
• Hardware Tlhokomelo
• Super Charger
• Lisebelisoa li potlakisa
• Smart Image Finder
• Motsoalle oa MSI
• Tlhahlobo ea Tsamaiso
• Lintlha tsa Tsamaiso
• MicrosoftApp
• Sesebediswa saka
• MSI Display kit

Likarolo tsa Mocheso

• Moqapi oa pipe ea mocheso
• Moqapi oa Heatsink o Atolositsoeng
• M.2 Shield Frozr
• K7 MOSFET thermal pad / E eketsehileng choke pad
• Lihlooho tsa balateli (CPU + PUMP +SYSTEM)

Tshebetso

• Boost ea mantlha
• Matla a mabeli a CPU
• Matlafatsa Memori
• Lehalima Gen 5 PCI-E
• Lehalima Gen 4 PCI-E / M.2 Slot
• USB Type-C e ka pele
• Seva Grade PCB
• 2oz Koporo thickened PCB

DIY Motsoalle

• Lihlomo tsa tšepe tsa PCI-E
• Shield ea I / O e kentsoeng pele
• Screwless M.2 Shield Frozr
• EZ M.2 Likotwana
• EZ DEBUG LED
• EZ LED Control
• Konopo ea Flash BIOS

Audio

• Boemo bo Matla 5

Tšehetso ea RGB

• Leseli la Mystic
• Mystic Light Extension (RGB)
• Mystic Light Extension (ARGB Gen2)
• Tšehetso ea Lisebelisoa tsa Ambient

BIOS

• Tobetsa BIOS 5

Litaba tsa Sephutheloana

Ka kopo, sheba litaba tsa sephutheloana sa hau sa boardboard. E lokela ho ba le:
Boto

• 1x "Motherboard".

Litokomane

• 1x Tataiso ea ho instola ka potlako
• 1x Tsebiso ea taolo ea European Union

Kopo

• 1x USB drive e nang le bakhanni le lisebelisoa

Lithapo

• 2x lithapo tsa SATA 6Gb/s

Lisebelisoa

• 1x sete ea manakana a Wi-Fi
• 3x EZ M.2 Clip packages (sete e le 1/pakete)
• 1x setikara sa thapo

⚠ Bohlokoa

• Ho na le ISO file ka koloing ea USB e fanoeng. Ke kopa o se ke oa e hlakola ka phoso.
  Bakeng sa tlhaiso-leseling e batsi mabapi le ho kenya li-driver, ka kopo sheba khaolo ea Ho kenya OS, Drivers & MSI Center.
• Haeba e 'ngoe ea lintho tse ka holimo e senyehile kapa e le sieo, ka kopo ikopanye le morekisi oa hau.

Back Panel Connectors

Ntho	Tlhaloso
1	DisplayPort
2	USB 3.2 Gen 1 5Gbps Likou tsa Mofuta oa A (Ho tloha Hub GL3523)
3	USB 3.2 Gen 2 10Gbps Type-A ports (Ho tloha ho chipset ea Z790)
4	2.5 Gbps LAN IRJ451 port
5	Lihokelo tsa antenna tsa Wi-Fi
6	Lijeke tsa audio
7	Boema-kepe ba HDMITM
8	Hlakola konopo ea CMOS • tima komporo ea hau. Tobetsa 'me u tšoare konopo ea Tlosa CMOS bakeng sa metsotsoana e ka bang 5-10 ho seta BIOS ho boleng ba kamehla.
9	Konopo ea Flash BIOS •Ka kopo, sheba leqephe la 58 bakeng sa lintlha tse mabapi le ho nchafatsa BIOS ka konopo ea Flash BIOS.
10	USB 3.2 Gen 2 10Gbps boema-kepe ba Mofuta oa C (Ho tloha ho chipset ea Z790)
11	Boema-kepe ba Flash BIOS
12	USB 3.2 Gen 2×2 20Gbps boema-kepe ba Mofuta oa C (Ho tloha ho chipset ea Z790)
13	Sehokelo sa Optical S/PDIF Out

Lethathamo la Boemo ba LED ba LAN Port

Audio Jacks Connection

Li-jacks tsa molumo ho headphone le microphone diagramLi-jacks tsa molumo ho setšoantšo sa libui tsa stereoLi-jacks tsa molumo ho isa ho setšoantšo sa libui tse 4Li-jacks tsa molumo ho isa ho setšoantšo sa libui tse 5.1Li-jacks tsa molumo ho isa ho setšoantšo sa libui tse 7.1

Ho kenya Antennas

1. Kopanya antenna le setsi.
2. Hokela lithapo tse peli tsa manakana ka thata-thata ho lihokelo tsa manakana a Wi-Fi joalo ka ha ho bonts'itsoe.
3. Beha lenakana ka holimo kamoo ho ka khonehang.

Fetileview ea Likarolo

CPU SocketKenyelletso ea LGA1700 CPU
Bokaholimo ba LGA1700 CPU bo na le linoto tse 'ne le khutlotharo ea khauta ho thusa ho hokahanya CPU ka nepo bakeng sa ho beoa ha boardboard. khutlotharo ea khauta ke sesupo sa Pin 1.
Bohlokoa

• Kamehla u hokele thapo ea motlakase ho tsoa mohloling oa motlakase pele u kenya kapa u ntša CPU.
• Ka kopo, boloka cap e sireletsang ea CPU ka mor'a ho kenya processor. MSI e tla sebetsana le likopo tsa Return Merchandise Authorization (RMA) haeba feela board ea bo-mme e tla le cap e sireletsang soketeng ea CPU.
• Ha u kenya CPU, kamehla hopola ho kenya heatsink ea CPU. CPU heatsink ea hlokahala ho thibela ho chesa le ho boloka botsitso ba sistimi.
• Netefatsa hore CPU heatsink e thehile tiiso e tiileng le CPU pele e qala sistimi ea hau.
• Ho chesa haholo ho ka senya CPU le boardboard haholo. Kamehla etsa bonnete ba hore balateli ba pholileng ba sebetsa hantle ho sireletsa CPU ho chesa haholo. Etsa bonnete ba hore o kenya lesela le lekanang la peista ea mocheso (kapa tepi ea mocheso) pakeng tsa CPU le heatsink ho matlafatsa ho qhala mocheso.
• Nako le nako ha CPU e sa kengoa, kamehla sireletsa lithakhisa tsa sokete tsa CPU ka ho koahela sokete ka cap ea polasetiki.
• Haeba u rekile CPU e arohaneng le heatsink / pholileng, Ka kopo sheba litokomane tse ka har'a sephutheloana sa heatsink / pholileng bakeng sa lintlha tse ling mabapi le ho kenya.
• Letlapa lena le etselitsoe ho tšehetsa overclocking. Pele u leka ho overclocking, ka kopo etsa bonnete ba hore likarolo tse ling tsohle tsa tsamaiso li ka mamella overclocking. Boiteko leha e le bofe ba ho sebetsa ho feta litlhaloso tsa sehlahisoa ha boa khothaletsoa. MSI® ha e fane ka tiiso ea ts'enyehelo kapa likotsi tse bakiloeng ke ts'ebetso e sa lekaneng ho feta litlhaloso tsa sehlahisoa.

Libaka tsa DIMMKeletso ea ho kenya mojule oa memori

⚠ Bohlokoa

• Kamehla kenya limojule tsa memori sebakeng sa DIMMA2 slot pele.
• Ho netefatsa botsitso ba sistimi bakeng sa Dual channel mode, li-module tsa memori li tlameha ho ba tsa mofuta o le mong, palo le boima ba 'mele.
• Li-module tse ling tsa memori li ka sebetsa ka lebelo le tlase ho feta boleng bo tšoailoeng ha li-overclocking ka lebaka la maqhubu a memori a sebetsang ho ipapisitse le Serial.
  Ho Fumana Boteng (SPD). Eya ho BIOS 'me u fumane Frequency ea DRAM ho seta maqhubu a memori haeba u batla ho sebelisa memori ka mokhoa o tšoailoeng kapa ka lebelo le holimo.
• Ho khothaletsoa ho sebelisa sistimi e pholileng ea memori e sebetsang hantle haholoanyane bakeng sa ho kenya li-DIMM ka botlalo kapa overclocking.
• Ho tsitsa le ho lumellana ha module ea memori e kentsoeng ho itšetlehile ka CPU e kentsoeng le lisebelisoa ha li feta overclocking.
• Ka kopo sheba ho www.msi.com bakeng sa tlhaiso-leseling e batsi ka memori e tsamaellanang.

PCI_E1~3: PCIe Katoloso Slots

⚠ Bohlokoa

• Haeba u kenya karete ea litšoantšo e kholo le e boima, u lokela ho sebelisa sesebelisoa se kang MSI Graphics Card Bolster ho tšehetsa boima ba eona ho thibela ho senyeha ha slot.
• Bakeng sa ho kenya karete e le 'ngoe ea katoloso ea PCIe x16 e nang le ts'ebetso e nepahetseng, ho khothaletsoa ho sebelisa slot ea PCI_E1.
• Ha u eketsa kapa u tlosa likarete tsa katoloso, kamehla tima phepelo ea motlakase 'me u lokolle thapo ea motlakase ho tsoa mohloling oa motlakase. Bala litokomane tsa karete ea katoloso ho bona hore na ho na le liphetoho tse ling tse hlokahalang tsa hardware kapa software.

M2_1~5: M.2 Slots (Key M)

https://youtu.be/J88vcXeLido

⚠ Bohlokoa

• Intel® RST e tšehetsa PCIe M.2 SSD feela ka UEFI ROM.
• Haeba M.2 SSD ea hau e hlomella heatsink ea eona, ka kopo tlosa lipoleiti tsa M.2 kapa li-cubes tsa rabara libakeng tsa M.2 pele u kenya M.2 SSD. Se ke oa kenya li-heatsink hape tse fanoeng le board ea hau ea bo-mme.

Ho kenya M.2 mojuleng ho M2_1 slot

1. Tobetsa 'me u tšoare konopo ea ho qetela ea Screwless M.2 Shield Frozr heatsink.
   
2. Phahamisa hanyenyane karolo ea ho qetela ea Screwless M.2 Shield Frozr heatsink 'me u e ise pele ho tlosa heatsink.
   
3. Tlosa lifilimi tse sireletsang ho tloha M.2 mocheso oa mocheso holim'a poleiti ea M.2.
   
4. Tlosa kapa u fetole li-screws ho latela bolelele ba SSD ea hau. Tlola mohato ona, haeba u kenya 2280 SSD.
   
5. Kenya M.2 SSD ea hau sekoting sa M.2 ka sekhutlo sa 30-degree.
6. Fetola Clip ea EZ M.2 ho lokisa M.2 SSD.
   
7. Tlosa lifilimi tse sireletsang ho tloha liphatleng tsa mocheso tlas'a Screwless M.2 Shield Frozr heatsink.
8. Lokisa li-tenons tlas'a Screwless M.2 Shield Frozr heatsink le li-notch, ebe u khutlisetsa heatsink sebakeng.
9. Tobetsa lehlakore la ho qetela la Screwless M.2 Shield Frozr heatsink fatše ho e notlela ka ho feletseng.
   

E kenya M.2 module ho M2_2 & M2_5 slots

1. Lokolla likurufu tsa M.2 Shield Frozr heatsink.
2. Phahamisa heatsink ea M.2 Shield Frozr 'me ue tlose.
   
3. Haeba u batla ho kenya 2260 M.2 SSD, ka kopo kenya EZ M.2 Clip kit e fanoeng ka har'a lesoba la 2260 screw. Tlola mohato ona, haeba u kenya 2280 SSD.
   
4. Kenya M.2 SSD ea hau sekoting sa M.2 ka sekhutlo sa 30-degree.
5. Fetola Clip ea EZ M.2 ho lokisa M.2 SSD.
   
6. Tlosa filimi e sireletsang ho tloha mocheso oa mocheso tlas'a mocheso oa M.2 Shield Frozr heatsink.
7. Beha heatsink ea M.2 Shield Frozr hape 'me u e sireletse.
   

E kenya M.2 module ho M2_3 & M2_4 slots

1. Lokolla likurufu tsa M.2 Shield Frozr heatsink.
2. Phahamisa heatsink ea M.2 Shield Frozr 'me ue tlose.
   
3. Haeba u batla ho kenya 2242 kapa 2260 M.2 SSD, ka kopo kenya EZ M.2 Clip kit e fanoeng ka har'a lesoba la 2240 kapa 2260. Tlola mohato ona, haeba u kenya 2280 SSD.
   ∙ sekotjana sa M2_3
   ∙ sekotjana sa M2_4
   
4. Kenya M.2 SSD ea hau sekoting sa M.2 ka sekhutlo sa 30-degree.
5. Fetola Clip ea EZ M.2 ho lokisa M.2 SSD.
   ∙ sekotjana sa M2_3
   ∙ sekotjana sa M2_4
   
6. Tlosa filimi e sireletsang ho tloha mocheso oa mocheso tlas'a mocheso oa M.2 Shield Frozr heatsink.
7. Beha heatsink ea M.2 Shield Frozr hape 'me u e sireletse.
   

SATA_1, SATA_5~6, SATA_7~8 & SATA_A1~A2: SATA 6Gb/s Lihokelo
Lihokelo tsena ke li-port tsa SATA 6Gb/s. Sehokelo se seng le se seng se ka hokela sesebelisoa se le seng sa SATA.

⚠ Bohlokoa

• Ka kopo o seke oa mena thapo ea SATA ka angle ea 90-degree. Tahlehelo ea data e ka fella nakong ea phetiso ho seng joalo.
• Lithapo tsa SATA li na le li-plug tse tšoanang mahlakoreng ka bobeli a thapo. Leha ho le joalo, ho khothaletsoa hore sehokelo se bataletseng se hokahane le boardboard bakeng sa merero ea ho boloka sebaka.
• SATA_1 e ke ke ea fumaneha ha u kenya M.2 SATA SSD sebakeng sa M2_3.

JAUD1: Sehokelo sa Audio Front
Sehokelo sena se u lumella ho hokela li-jacks tsa audio ho phanele e ka pele.

Pin	Lebitso la Letshwao	Pin	Lebitso la Letshwao
1	MIC L	2	Fatše
3	MICR	4	NC
5	Mohala oa mohala R	6	Tlhaloso ea MIC
7	LIEKETSENG ROMELA	8	Ha ho Pin
9	Mohala oa Mohala L	10	Tlhaloso ea Mohala oa Mohala

JFP1, JFP2: Lihokelo tsa Phanele tse ka Pele
Sehokedi sa JFP1 se laola matla a ho bulela, ho seta matla botjha, le di-LED ho komporo/chesi ea PC ea hau. Power Switch/ Reset Switch headers e u lumella ho hokela konopo ea matla/
reset konopo. Sehlooho sa Power LED se hokahana le leseli la LED kheseng ea PC, 'me hlooho ea HDD LED e bonts'a ts'ebetso ea hard disk. Sehokelo sa JFP2 ke sa Buzzer le
Sebui. Ho hokahanya likhoele ho tloha ho PC ho ea ho lithapo tse nepahetseng, ka kopo sheba litšoantšo tse latelang tse ka tlase.

⚠ Bohlokoa
Ka kopo elelloa hore Power LED le HDD LED li na le khokahano e ntle le e mpe, o hloka ho hokela thapo ho boema-kepe bo nepahetseng le bo bobe bo leboteng. Ho seng joalo, li-LED li ke ke tsa sebetsa hantle.

JDASH1: Tuning Controller Connector
Sehokedi sena se sebediswa ho hokela mojule wa boikgethelo wa Tuning Controller.

Pin	Lebitso la Letshwao	Pin	Lebitso la Letshwao
1	Ha ho Pin	2	NC
3	MCU_SMB_SCL_M	4	MCU_SMB_SDA_M
5	VCC5	6	Fatše

JCI1: Mohokahanyi oa Chassis Intrusion
Sehokelo sena se u lumella ho hokela thapo ea mochini oa chassis intrusion switch.

Ho sebelisa mochine o kenang ka har'a chassis

1. Hokela sehokelo sa JCI1 ho chassis intrusion switch/ sensor ho chassis.
2. Koala sekoahelo sa chassis.
3. Eya ho BIOS> SETTINGS> Tshireletso> Chassis Intrusion Configuration.
4. Etsa hore ho Kenyelleha ha Chassis ho E lumelle.
5. Tobetsa F10 ho boloka le ho tsoa ebe o tobetsa konopo ea Enter ho khetha E.
6. Hang ha sekoaelo sa chassis se buloa hape, molaetsa oa temoso o tla hlahisoa skrineng ha komporo e buletsoe.

Ho tsosolosa temoso ea ho kena ha chassis

1. Eya ho BIOS> SETTINGS> Tshireletso> Chassis Intrusion Configuration.
2. Beha Kenyelletso ea Chassis ho Reset.
3. Tobetsa F10 ho boloka le ho tsoa ebe o tobetsa konopo ea Enter ho khetha E.

CPU_PWR1~2, ATX_PWR1: Lihokelo tsa Matla
Lihokelo tsena li u lumella ho hokela phepelo ea motlakase ea ATX.

CPU_PWR1~2

Pin	Lebitso la Letshwao	Pin	Lebitso la Letshwao
1	Fatše	2	Fatše
3	Fatše	4	Fatše
5	+12V	6	+12V
7	+12V	8	+12V

EA-KO1

Pin	Lebitso la Letshwao	Pin	Lebitso la Letshwao
1	+3.3V	2	+3.3V
3	Fatše	4	+5V
5	Fatše	6	+5V
7	Fatše	8	PWR Ho lokile
9	5VSB	10	+12V
11	+12V	12	+3.3V
13	+3.3V	14	-12V
15	Fatše	16	PS-ON #
17	Fatše	18	Fatše
19	Fatše	20	Res
21	+5V	22	+5V
23	+5V	24	Fatše

⚠ Bohlokoa
Etsa bonnete ba hore likhoele tsohle tsa motlakase li hokahane ka mokhoa o sireletsehileng ho phepelo e nepahetseng ea motlakase ea ATX ho netefatsa ts'ebetso e tsitsitseng ea boardboard.

JUSB4: USB 3.2 Gen 2 Mofuta oa C oa Sehokelo se ka Pele
Sehokelo sena se u lumella ho hokela sehokelo sa USB 3.2 Gen 2 10Gbps Type-C phanele e ka pele. Sehokedi se na le moralo o se nang kelello. Ha o hokela thapo, e be
bonnete ba ho e amahanya le tjhebahalo e tsamaellanang.

JUSB3: Sehokelo sa USB 3.2 Gen 1
Sehokelo sena se u lumella ho hokela likou tsa USB 3.2 Gen 1 5Gbps phanele e ka pele.

Pin	Lebitso la Letshwao	Pin	Lebitso la Letshwao
1	Matla	2	Khatiso ea USB3_RX_DN
3	Khatiso ea USB3_RX_DP	4	Fatše
5	USB3 TX C DN	6	USB3_TX_C_DP
7	Fatše	8	USB2.0-
9	USB2.0+	10	Fatše
11	USB2.0+	12	USB2.0-
13	Fatše	14	USB3_TX_C_DP
15	USB3 TX C DN	16	Fatše
17	Khatiso ea USB3_RX_DP	18	Khatiso ea USB3_RX_DN
19	Matla	20	Ha ho Pin

⚠ Bohlokoa
Hlokomela hore lithakhisa tsa Power le Ground li tlameha ho hokahanngoa ka nepo ho qoba tšenyo e ka bang teng.

JUSB1~2: Lihokelo tsa USB 2.0
Lihokelo tsena li u lumella ho hokela likou tsa USB 2.0 phanele e ka pele.

Pin	Lebitso la Letshwao	Pin	Lebitso la Letshwao
1	VCC	2	VCC
3	USBO-	4	USB1-
5	USBO+	6	USB1+
7	Fatše	8	Fatše
9	Ha ho Pin	10	NC

⚠ Bohlokoa

• Hlokomela hore VCC le Ground pins li tlameha ho hokeloa ka nepo ho qoba tšenyo e ka bang teng.
• Bakeng sa ho nchafatsa iPad, iPhone le iPod ea hau ka likoung tsa USB, ka kopo kenya sesebelisoa sa MSI Center.

JTPM1: Sehokedi sa Module ea TPM
Sehokelo sena ke sa TPM (Trusted Platform Module). Ka kopo sheba bukana ea sethala sa ts'ireletso sa TPM bakeng sa lintlha tse ling le ts'ebeliso.

Pin	Lebitso la Letshwao	Pin	Lebitso la Letshwao
1	Matla a SPI	2	Khetho ea SPI Chip
3	Mong'a Lekhoba Lintlha tsa ISPI)	4	Hlahloba makhoba (Boitsebiso ba SPI)
5	Reserved	6	Clock ea SPI
7	Fatše	8	Khutlisetsa SPI
9	Reserved	10	Ha ho Pin
11	Reserved	12	Kopana le Kopo

JOC_FS1: Safe Boot Jumper
Jumper ena e sebelisetsoa Safe Boot. Ha e se e nolofalitsoe, sistimi e tla qala ka li-setting tsa kamehla le ho theola PCIe (ho tloha ho CPU).

JTBT1: Sehokedi sa Karete ea Tlatsetso ea Leqhubu
Sehokelo sena se u lumella ho hokela karete ea tlatsetso ea Thunderbolt I/O.

Pin	Lebitso la Letshwao	Pin	Lebitso la Letshwao
1	TBT FORCE PWR	2	TBT SOIX KENYA
3	TBT CIO PLUG EVENT#	4	TBT SOIX KENYA
5	SLP 53# TBT	6	TBT_PSON_ FEELA N
7	SLP S5# TBT	8	Ha ho Pin
9	Fatše	10	SMBCLK VSB
11	DG PEWAKE#	12	SMBDATA VSB
13	TBT RTD3 PWR EN	14	Fatše
15	TBT CARD DET R#	16	PD IRQ#

CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Lihokelo tsa Fans
Lihokelo tsa fan li ka hlalosoa e le PWM (Pulse Width Modulation) Mode kapa DC Mode. Lihokelo tsa fan Mode ea PWM li fana ka tlhahiso ea kamehla ea 12V le ho fetola lebelo la fan ka
lets'oao la taolo ea lebelo. Lihokelo tsa fan Mode ea DC li laola lebelo la fan ka ho fetola voltage. Lihokelo tsa fan mode mode li ka iphumanela mokhoa oa PWM le DC. O ka laola libapali ho BIOS> HARDWARE MONITOR panel. E u lumella ho beha DC kapa PWM mofuteng oa fan oa hau. Lekola Smart Fan Mode, lebelo la fan le tla fetoha ho latela CPU kapa mocheso oa sistimi. Hlakola Smart Fan Mode, fan e tla bilika ka lebelo le phahameng.

⚠ Bohlokoa
Etsa bonnete ba hore balateli ba sebetsa hantle ka mor'a ho fetola mokhoa oa PWM/ DC.

Tlhaloso ea pini ea PWM

Pin	Lebitso la Letshwao	Pin	Lebitso la Letshwao
1	Fatše	2	+12V
3	Sense	4	Letšoao la Taolo ea Lebelo

Tlhaloso ea pinana ea DC Mode

Pin	Lebitso la Letshwao	Pin	Lebitso la Letshwao
1	Fatše	2	Moqtage Laola
3	Sense	4	NC

Litlhaloso tsa sehokelo sa fan

Sehokedi	Mokhoa oa kamehla oa fan	Max. jwale	Max. matla
CPU FAN1	Auto mode	2A	24W
PUMP FAN1	Mokhoa oa PWM	3A	36W
SYS FAN1-6	Mokhoa oa DC	1A	12W

JBAT1: Hlakola CMOS (Reset BIOS) Jumper
Ho na le memori ea CMOS ka har'a board e tsoang kantle ho betri e fumanehang lebopeng la mama ho boloka data ea tlhophiso ea sistimi. Haeba u batla ho hlakola tlhophiso ea sistimi, beha li-jumpers ho hlakola mohopolo oa CMOS.

Ho tsosolosa BIOS ho litekanyetso tsa kamehla

1. Tlosa komporo ebe o ntša thapo ea motlakase.
2. Sebelisa jumper cap ho khutsufatsa JBAT1 ka metsotsoana e 5-10.
3. Tlosa seaparo sa jumper ho JBAT1.
4. Hokela thapo ea matla le Matla komporong.

BAT1: Betri ea CMOS
Haeba betri ea CMOS e felloa ke tefiso, nako ea BIOS e tla beoa bocha mme data ea tlhophiso ea sistimi e tla lahleha. Tabeng ena, o hloka ho khutlisa betri ea CMOS.

Ho fetola betri ea CMOS

1. Sututsa sekotwana sa retainer ho lokolla betri.
2. Tlosa betri ka soketeng.
3. Kenya betri e ncha ea CR2032 e nang le letšoao + le shebileng holimo. Netefatsa hore seboloki se tšoara betri ka mokhoa o sireletsehileng.

JRGB1: Sehokelo sa LED sa RGB
Sehokelo sa JRGB se u lumella ho hokela likhoele tsa 5050 RGB LED 12V.

Pin	Lebitso la Letshwao	Pin	Lebitso la Letshwao
1	+12V	2	G
3	R	4	B

RGB LED Strip Connection

Khokahano ea Fan ea LED ea RGB

⚠ Bohlokoa

• Sehokedi sa JRGB se tshehetsa ho fihla ho dimithara tse 2 tse tswelang pele tsa 5050 RGB LED strips (12V/G/R/B) ka matla a phahameng a 3A (12V).
• Kamehla tima motlakase 'me u lokolle thapo ea motlakase sebakeng sa motlakase pele u kenya kapa u ntša lesela la RGB la LED.
• Ka kopo sebelisa software ea MSI ho laola lesela le atolositsoeng la LED.

JARGB_V2_1~3: A-RAINBOW V2 (ARGB Gen2) LED Lihokelo
Lihokelo tsa JARGB_V2 li u lumella ho hokahanya ARGB Gen2 le likhoele tsa LED tse thehiloeng ho ARGB. Sehokelo sa JARGB_V2 se ts'ehetsa li-RGB tsa LED tse ka bang 240 ka bonngoe tse nang le matla a phahameng a 3A (5V).

Pin	Lebitso la Letshwao	Pin	Lebitso la Letshwao
1	+5V	2	Lintlha
3	Ha ho Pin	4	Fatše

Khokahano ea marang-rang ea RGB LED Strip

Khokahano ea Fan ea LED ea RGB e fumanehang

⚠ TLHOKOMELO
Se ke oa hokela mefuta e fosahetseng ea likhoele tsa LED. Sehokelo sa JRGB le sehokelo sa JARGB_V2 se fana ka matla a fapanengtages, le ho hokahanya lesela la LED la ARGB 5V ho sehokelo sa JRGB ho tla baka tšenyo ho lesela la LED.

⚠ Bohlokoa

• Haeba o hokela likhoele tsa LED tsa ARGB Gen1 le ARGB Gen2 sehokelong se le seng, ho ka baka mathata. Ka kopo o seke oa kopanya likhoele tsa LED tsa ARGB Gen1 le ARGB Gen2 hammoho.
• Ho kgothaletswa hore o kenye marang-rang a LED a nang le litlhaloso tse tšoanang ho finyella liphello tse ntle ka ho fetisisa.
• Kamehla tima motlakase 'me u lokolle thapo ea motlakase ho tsoa mohloling oa motlakase pele u kenya kapa u tlosa mohala oa RGB oa LED o khonang ho etsa aterese.
• Ka kopo sebelisa software ea MSI ho laola lesela le atolositsoeng la LED.

Li-LED tsa onboard

Leseli la Deb Deb
Li-LED tsena li bontša boemo ba "debug" ba "motherboard".

CPU - e bonts'a CPU ha e fumanoe kapa ho hloleha.
DRAM - e bontša hore DRAM ha e fumanoe kapa ho hloleha.
VGA - e bontša hore GPU ha e fumanoe kapa ho hloleha.
TLHOKOMELO – e bontsha hore sesebediswa sa ho qalisa ha se fumanwe kapa ha se a hloleha.

JPWRLED1: Kenyo ea Matla a LED
Sehokelo sena se sebelisoa ke barekisi ho bonts'a mabone a LED a kahare.

LED_SW1: Taolo ea LED ea EZ
Sesebelisoa sena se sebelisetsoa ho tima / ho tima li-LED tsohle tsa boardboard.

Ho kenya OS, Drivers & MSI Center
Ka kopo, khoasolla le ho nchafatsa lisebelisoa tsa morao-rao le li-driver ho www.msi.com
Ho kenya Windows 10/ Windows 11

1. Matla khomphuteng.
2. Kenya Windows 10/ Windows 11 kenya disc/USB komporong ea hau.
3. Tobetsa konopo ea Restart k'homphieutheng.
4. Tobetsa konopo ea F11 nakong ea komporo ea POST (Power-On Self Test) ho kena ho Boot Menu.
5. Khetha Windows 10/ Windows 11 install disc/USB ho tswa ho Boot Menu.
6. Tobetsa konopo efe kapa efe haeba skrineng se hlaha Tobetsa konopo efe kapa efe ho qala ho tsoa ho CD kapa DVD… molaetsa. Haeba ho se joalo, ka kopo, tlola mohato ona.
7. Latela litaelo tse skrineng ho kenya Windows 10/ Windows 11.

Ho kenya Bakhanni ka MSI Driver Utility Installer
⚠ Bohlokoa

• Li-chips tse ling tse ncha tsa marang-rang ha lia tšehetsoa ka tlhaho ke Windows 10/ Windows 11. Ho khothalletsoa hore mokhanni oa LAN a kenngoe pele o kenya li-driver tse nang le MSI Driver Utility Installer. Ka kopo, sheba ho www.msi.com ho kenya mokhanni oa LAN bakeng sa boardboard ea hau.
• MSI Driver Utility Installer e tla hlaha hang feela. Haeba u e hlakola kapa ua e koala nakong ea ts'ebetso, ka kopo sheba khaolo ea Live Update ea bukana ea Setsi sa MSI ho
  kenya bakhanni. U ka boela ua ea ho www.msi.com ho batlisisa boardboard ea hau le ho jarolla li-driver.
• MSI Driver Utility Installer e hloka ho kenngoa marang-rang.

1. Qala komporo ea hau ho Windows 10/ Windows 11.
2. Kgetha Qala > Di-setting > Windows Update, ebe o kgetha Hlahloba bakeng sa diapdeite.
3. MSI Driver Utility Installer e tla itlhahisa ka bo eona.
   
4. Khetha lebokose leo ke le balileng 'me ke lumellana le Melao ea Tšebeliso ea MSI, ebe o tobetsa E latelang.
   
5. Sheba lebokose la "Khetha Tsohle" k'honeng e ka tlase ka letsohong le letšehali ebe o tobetsa Kenya ho kenya MSI Center le bakhanni. Ts'ebetso ea ho kenya e tla bontšoa ka tlase.
   
6. Hang ha tsoelo-pele e phethiloe, tobetsa Finish.

Ho kenya Bakhanni ka MSI USB Drive

1. Qala komporo ea hau ho Windows 10/ Windows 11.
2. Kenya MSI USB Drive boema-kepeng ba USB.
3. U ka bona Setšoantšo sa Disc file e nang le bakhanni le lisebelisoa ho USB drive. Penya habeli ho file ho e bula.
4. Kenya kopo file e bitsoang DVDSetup.
5. Sesebelisoa se tla fumana le ho thathamisa bakhanni bohle ba hlokahalang ho "Drivers/Software tab".
6. Tobetsa konopo ea Instalar k'honeng e ka tlase ho le letona la fensetere.
7. Ts'ebetso ea ho kenya li-driver e tla tsoela pele, ka mor'a hore e phethe e tla u susumelletsa hore u qale hape.
8. Tobetsa konopo ea OK ho qeta.
9. Qala komporo ea hau bocha.

Setsi sa MSI
MSI Center ke sesebelisoa se u thusang ho ntlafatsa litlhophiso tsa papali habonolo le ho sebelisa lisebelisoa tsa tlhahiso ea litaba habonolo. E boetse e u lumella ho laola le ho hokahanya mabone a LED ho li-PC le lihlahisoa tse ling tsa MSI. Ka MSI Center, o ka etsa mekhoa e metle, oa lekola ts'ebetso ea sistimi, 'me oa fetola lebelo la fan.

Tataiso ea mosebelisi ea Setsi sa MSI

Haeba u batla ho tseba haholoanyane ka MSI Center, ka kopo sheba ho http://download.msi.com/manual/mb/MSICENTER.pdf kapa hlahloba khoutu ea QR ho fihlella.

⚠ Bohlokoa
Mesebetsi e ka fapana ho latela sehlahisoa seo u nang le sona.

UEFI BIOS

MSI UEFI BIOS e tsamaisana le meralo ea UEFI (Unified Extensible Firmware Interface). UEFI e na le mesebetsi e mengata e mecha le advantags eo BIOS ea setso e ke keng ea e fihlela, 'me e tla nkela BIOS sebaka ka botlalo nakong e tlang. MSI UEFI BIOS e sebelisa UEFI joalo ka mokhoa oa kamehla oa boot ho nka advan e felletsengtage ea bokhoni ba chipset e ncha.

⚠ Bohlokoa
Lentsoe BIOS bukeng ena ea mosebelisi le bolela UEFI BIOS ntle le ha ho boletsoe ka tsela e 'ngoe.

Phatlalatso ea UEFItages

• Ho thunya ka potlako - UEFI e ka bula sistimi e sebetsang ka kotloloho mme ea boloka ts'ebetso ea boits'oaro ea BIOS. Hape e tlosa nako ea ho fetohela ho mofuta oa CSM nakong ea POST.
• E tšehetsa likarolo tsa hard drive tse kholo ho feta 2 TB.
• E ts'ehetsa likarolo tse fetang 4 tsa mantlha tse nang le GUID Partition Table (GPT).
• E tšehetsa palo e sa lekanyetsoang ea li-partitions.
• E ts'ehetsa bokhoni bo felletseng ba lisebelisoa tse ncha - lisebelisoa tse ncha li kanna tsa se fane ka tšebelisano ea morao.
• E ts'ehetsa ho qala ka mokhoa o sireletsehileng - UEFI e ka hlahloba bonnete ba sistimi ea ts'ebetso ho netefatsa hore ha ho na malware tampka mokhoa oa ho qala.

Linyeoe tsa UEFI tse sa lumellaneng

• Sistimi ea ts'ebetso ea 32-bit ea Windows - board ena ea bo-mme e tšehetsa feela Windows 10/Windows 11 64-bit sistimi e sebetsang.
• Karete ea khale ea litšoantšo - sistimi e tla bona karete ea hau ea litšoantšo. Haeba u sebelisa likarete tsa khale tsa litšoantšo, li ka hlahisa molaetsa oa temoso Ha ho tšehetso ea GOP (Graphics Output protocol) e fumanoeng kareteng ena ea litšoantšo.

⚠ Bohlokoa
Re khothaletsa hore u e nkele sebaka ka karete ea litšoantšo e tšehetsang GOP/UEFI kapa u sebelise CPU e nang le lits'oants'o tse kopaneng bakeng sa ts'ebetso e tloaelehileng.

Joang ho hlahloba mokhoa oa BIOS?

1. Kenya matla komporong ea hau.
2. Tobetsa Delete key, ha Tobetsa DEL konopo ho kenya Setup Menu, F11 ho kenya Boot Menu molaetsa o hlaha skrineng nakong ea ts'ebetso ea boot.
3. Ka mor'a ho kena BIOS, u ka hlahloba Mokhoa oa BIOS ka holimo ho skrine.

Mokhoa oa BIOS: UEFI

Ho theha BIOS
Litlhophiso tsa kamehla li fana ka ts'ebetso e nepahetseng bakeng sa botsitso ba sistimi maemong a tloaelehileng. U lokela ho boloka li-setting tsa kamehla ho qoba tšenyo e ka bang teng ea sistimi kapa ho hloleha ho qala ntle le haeba o tloaelane le BIOS.

⚠ Bohlokoa

• Lintho tsa BIOS li lula li ntlafatsoa bakeng sa ts'ebetso e ntle ea sistimi. Ka hona, tlhaloso e kanna ea fapana hanyane le BIOS ea morao-rao mme e lokela ho ba bakeng sa litšupiso feela. U ka boela ua sheba phanele ea tlhaiso-leseling ea HELP bakeng sa tlhaloso ea ntho ea BIOS.
• Lits'oants'o tsa BIOS, likhetho le litlhophiso li tla fapana ho latela sistimi ea hau.

Kenya Setupo sa BIOS
Tobetsa Delete key, ha Tobetsa DEL konopo ho kenya Setup Menu, F11 ho kenya Boot Menu molaetsa o hlaha skrineng nakong ea ts'ebetso ea boot.
Senotlolo sa tshebetso

F1:	Lenane la Thuso e Akaretsang
F2:	Add/ Tlosa ntho eo o e ratang
F3:	Kenya menu ya Favorites
F4:	Kenya Litlhaloso tsa CPU menu
F5:	Kenya menu ea Memory-Z
F6:	Jarolla liphoso tse ntlafalitsoeng
F7:	Fetolela lipakeng tsa Advanced mode le EZ mode
F8:	Jarisa Pro Overclockingfile
F9:	Boloka Overclocking Profile
F10:	Boloka Phetoho 'me u Esete Botjha*
F12:	Nka skrini 'me u e boloke ho USB flash drive (fomate ea FAT/ FAT32 feela).
Ctrl + F:	Kenya leqephe la Patlo

* Ha o tobetsa F10, ho hlaha fensetere ea netefatso mme e fana ka tlhaiso-leseling e fetotsoeng. Kgetha dipakeng tsa Ee kapa Tjhe ho netefatsa kgetho ya hao.

Tataiso ea basebelisi ba BIOS

Haeba u batla ho tseba ho eketsehileng ka litaelo tsa ho seta BIOS, ka kopo sheba ho https://download.msi.com/archive/mnu_exe/mb/Intel700BIOS.pdf kapa hlahloba khoutu ea QR ho fihlella.

⚠ Bohlokoa
Mesebetsi e ka fapana ho latela sehlahisoa seo u nang le sona.

Ho tsosolosa BIOS
U kanna ua hloka ho khutlisetsa maemo a kamehla a BIOS ho rarolla mathata a itseng. Ho na le litsela tse 'maloa tsa ho tsosolosa BIOS:

• Eya ho BIOS ebe o tobetsa F6 ho kenya lits'ebetso tse ntlafalitsoeng.
• Khutšoanyane le jumper e hlakileng ea CMOS e lebotong la bo-mme.
• Tobetsa konopo e hlakileng ea CMOS karolong e ka morao ea I / O.

⚠ Bohlokoa
Etsa bonnete ba hore komporo e koetsoe pele u hlakola data ea CMOS. Ka kopo sheba karolo e hlakileng ea CMOS jumper / button bakeng sa ho seta BIOS bocha.

Ho ntlafatsa BIOS
Ho ntlafatsa BIOS ka M-FLASH
Pele ho ntlafatso:
Ka kopo jarolla BIOS ea morao-rao file e tsamaellanang le mohlala oa boardboard ea hau ho tsoa ho MSI websebaka. Ebe u boloka BIOS file ho USB flash drive.
Ho ntlafatsa BIOS:

1. Fetolela ho sepheo sa BIOS ROM ka Multi-BIOS switch. Ka kopo, tlola mohato ona haeba board ea hau e se na switch ena.
2. Kenya USB flash drive e nang le ntlafatso file ho kena koung ea USB.
3. Ka kopo sheba mekhoa e latelang ea ho kenya flash mode.
   • Qala bocha ebe o tobetsa Ctrl + F5 senotlolo nakong ea POST ebe o tobetsa Ee ho qala sistimi.
   Tobetsa ho kenya M-Flash bakeng sa ntlafatso ea BIOS.
   Qala hape ebe o tobetsa konopo ea Del nakong ea POST ho kenya BIOS. Tobetsa konopo ea M-FLASH ebe o tobetsa E ho qala sistimi hape.
   
4. Khetha BIOS file ho etsa ts'ebetso ea ntlafatso ea BIOS.
5. Ha u khothalletsoa, ​​tobetsa E ho qala ho hlaphoheloa BIOS.
6. Kamora hore ts'ebetso ea ho benya e phetheloe ka 100%, sistimi e tla qala hape ka bo eona.

Ho ntlafatsa BIOS ka MSI Center
Pele ho ntlafatso:

• Etsa bonnete ba hore mokhanni oa LAN o se a kentsoe 'me khokahanyo ea inthanete e setiloe hantle.
• Ka kopo koala lisebelisoa tsohle tsa lisebelisoa pele u ntlafatsa BIOS.

Ho ntlafatsa BIOS:

1. Kenya le ho tsebisa Setsi sa MSI ebe u ea leqepheng la Ts'ehetso.
2. Khetha Live Update ebe u tobetsa konopo ea Advance.
3. Khetha BIOS file ebe o tobetsa konopo ea ho kenya.
4. Khopotso ea ho kenya e tla hlaha, ebe o tobetsa konopo ea Instalar ho eona.
5. Sistimi e tla qala hape ka bo eona ho ntlafatsa BIOS.
6. Kamora hore ts'ebetso e benyang e phetheloe ka 100%, sistimi e tla qala hape ka bo eona.

Ho ntlafatsa BIOS ka konopo ea Flash BIOS

1. Ka kopo jarolla BIOS ea morao-rao file e tsamaellanang le mofuta oa boardboard ea hau ho tsoa ho MSI® websebaka.
2. Fetola lebitso la BIOS file ho MSI.ROM, 'me u e boloke ho motso oa sesebelisoa sa polokelo ea USB.
3. Hokela phepelo ea motlakase ho CPU_PWR1 le ATX_PWR1. (Ha ho hlokahale ho kenya CPU le memori.)
4. Hokela sesebelisoa sa polokelo ea USB se nang le MSI.ROM file ka har'a Flash BIOS Port karolong e ka morao ea I/O.
5. Tobetsa Konopo ea Flash BIOS ho bonesa BIOS, 'me LED e qala ho benya.
6. LED e tla tima ha ts'ebetso e phethetsoe.

Setšoantšo se Thibeloang

MPG Z790 EDGE WIFI DDR4

Litsebiso tsa Tsamaiso
Setatemente sa Tšitiso ea Maqhubu a Sea-le-moea sa FCC-B
Sesebelisoa sena se lekiloe mme ho fumanoe hore se latela moeli oa sesebelisoa sa dijithale sa Class B, ho latela karolo ea 15 ea melao ea FCC. Meeli ena e etselitsoe ho fana ka ts'ireletso e utloahalang khahlano le tšitiso e kotsi moahong oa bolulo. Sesebelisoa sena se hlahisa, se sebelisa le ho ntša matla a maqhubu a seea-le-moea, 'me, haeba se sa kengoa le ho sebelisoa ho latela litaelo, se ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala ts'ebetsong e itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi kamohelong ea seea-le-moea kapa thelevishene, e ka khetholloang ka ho tima lisebelisoa, mosebelisi o khothaletsoa ho leka ho lokisa tšitiso ka e 'ngoe ea mehato e latelang:

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.

HLOKOMELA

• Liphetoho kapa litokiso tse sa amoheloang ka ho hlaka ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa thepa.
• Lithapo tsa sehokelo sa Shield le thapo ea motlakase ea AC, haeba li teng, li tlameha ho sebelisoa molemong oa ho tsamaisana le meeli ea tlhahiso.

Maemo a FCC

Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

• Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi.
• Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

MSI Computer Corp.
Lekhotla la 901 Canada, City of Industry, CA 91748, USA
(626)913-0828
www.msi.com

Boemo ba CE
Lihlahisoa tse nang le letšoao la CE li lumellana le e le 'ngoe kapa tse ling tsa Litaelo tse latelang tsa EU kamoo ho ka sebetsang:

• RED 2014/53/EU
• Moqolo o tlasetagDirective 2014/35 / EU
• Taelo ea EMC 2014/30/EU
• RoHS Directive 2011/65/EU
• Taelo ea ErP 2009/125/EC

Ho lumellana le litaelo tsena ho lekoa ho sebelisoa European Harmonized Standards.
Sebaka sa ho ikopanya le litaba tsa taolo ke MSI-Europe: Eindhoven 5706 5692 ER Son.

Lihlahisoa tse nang le Radio Functionality (EMF)
Sehlahisoa sena se kenyelletsa sesebelisoa se fetisang le ho amohela seea-le-moea. Bakeng sa lik'homphieutha tse sebelisoang ka mokhoa o tloaelehileng, sebaka se arohaneng sa 20 cm se tiisa hore maemo a ho pepeseha ha maqhubu a seea-le-moea a lumellana le litlhoko tsa EU. Lihlahisoa tse etselitsoeng ho sebetsoa libakeng tse haufi, joalo ka likhomphutha tsa tablet, li lumellana le litlhoko tse sebetsang tsa EU maemong a tloaelehileng a ts'ebetso. Lihlahisoa li ka sebelisoa ntle le ho boloka sebaka sa ho arohana ntle le ha ho boletsoe ka tsela e 'ngoe ho latela litaelo tse tobileng sehlahisoa.

Lithibelo bakeng sa Lihlahisoa tse nang le Ts'ebetso ea Radio
TLHOKOMELISO: IEEE 802.11x wireless LAN e nang le 5.15~5.35 GHz frequency band e thibetsoe ho sebelisoa ka tlung feela linaheng tsohle tseo e leng litho tsa European Union, EFTA (Iceland, Norway, Liechtenstein), le linaheng tse ling tse ngata tsa Europe (mohlala, Switzerland, Turkey, Rephabliki ea Serbia) . Ho sebelisa sesebelisoa sena sa WLAN kantle ho ka baka tšitiso le lits'ebeletso tse teng tsa radio.

Lihlopha tsa maqhubu a seea-le-moea le maemo a phahameng a matla

• Litšobotsi: Wi-Fi 6E, BT
• Hangata Range: 2.4 GHz: 2400 ~ 2485MHz; 5 GHz: 5150 ~ 5350MHz, 5470 ~ 5725MHz, 5725 ~ 5850MHz; 6 GHz: 5955 ~ 6415MHz
• Matla a Matla a Maholo: 2.4 GHz: 20dBm; 5 GHz: 23dBm; 6 GHz: 23dBm

Tšebeliso ea radio e se nang mohala
Sesebelisoa sena se sebetsa ka tlung ha feela se sebetsa ho 2.4GHz, 5GHz, 6GHz frequency band.

Polelo ea Tumellano ea Boqapi, Saense le Ntlafatso ea Moruo Canada (ISED)
Sesebediswa sena se dumellana le Dilaesense tse sa dumellwang ke Dilaesense tsa Canada tsa Innovation, Science and Economic Development RSS. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
(1) sesebelisoa sena se ke ke sa baka tšitiso, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso leha e le efe, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
Ts'ebetso ea sehlopha sa 5150-5250 MHz ke ea ts'ebeliso ea kahare feela ho fokotsa monyetla oa ho kena-kenana le kotsi ho litsamaiso tsa sathelaete tsa mehala ea mohala.
CAN ICES-003(B)/NMB-003(B)
Australia le New Zealand hlokomela
Thepa ena e kenyelletsa sesebelisoa se fetisang le ho amohela seea-le-moea. Tšebelisong e tloaelehileng, sebaka sa karohano sa 20 cm se netefatsa hore maemo a ho pepeseha ha maqhubu a seea-le-moea a lumellana le Maemo a Australia le New Zealand.

Lintlha tsa Battery
Mokhatlo oa linaha tsa Iropa:
Libetri, lipakete tsa libeteri, le li-accumulator ha lia lokela ho lahloa e le litšila tsa lelapa tse sa hlophisoang. Ka kopo sebelisa mokhoa oa pokello ea sechaba ho li khutlisa, ho li sebelisa hape, kapa ho li tšoara ho latela melao ea lehae.

BSMI:
Bakeng sa ts'ireletso e ntle ea tikoloho, libeteri tsa litšila li lokela ho bokelloa ka thoko bakeng sa ho sebelisoa hape kapa ho lahla ka mokhoa o khethehileng.

California, USA:
Betri ea sele ea konopo e kanna ea ba le lisebelisoa tsa perchlorate mme e hloka ho ts'oaroa ka mokhoa o khethehileng ha e sebelisoa hape kapa e lahloa California. Ho fumana lintlha tse ling ka kopo etela:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
TLHOKOMELISO: Ho na le kotsi ea ho phatloha, haeba betri e nketsoe sebaka ka phoso. Kenya sebaka feela ka mofuta o ts'oanang kapa o ts'oanang o khothalelitsoeng ke moetsi.

Boitsebiso ba Lintho tsa Lik'hemik'hale
Ho latela melaoana ea lintho tsa lik'hemik'hale, joalo ka EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI e fana ka leseli la lintho tsa lik'hemik'hale lihlahisoa ho: https://csr.msi.com/global/index

Leano la Tikoloho

• Sehlahisoa se etselitsoe ho thusa ho sebelisoa hape ka nepo ha likarolo le ho sebelisoa hape 'me ha sea lokela ho lahleloa qetellong ea bophelo ba sona.
• Basebelisi ba lokela ho ikopanya le sebaka se lumelletsoeng sa pokello ea lehae bakeng sa ho sebelisoa hape le ho lahla lihlahisoa tsa bona tsa ho qetela.
• Etela MSI websebaka le ho batla morekisi ea haufi bakeng sa tlhaiso-leseling e batsi ea ho e sebelisa hape.
• Basebelisi le bona ba ka re fihlela ho gpcontdev@msi.com Bakeng sa tlhaiso-leseling mabapi le ho lahla ho loketseng, ho khutlisa, ho nchafatsa le ho qhaqha lihlahisoa tsa MSI.

WEEE (Setatamente sa Lisebelisuoa tsa Motlakase le Motlakase)
Ho sireletsa tikoloho ea lefats'e le joalo ka setsebi sa tikoloho, MSI e tlameha ho u hopotsa hore…
Tlas'a European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, e tla qala ho sebetsa ka la 13 Phato, 2005, lihlahisoa tsa “lisebelisoa tsa motlakase le tsa elektroniki” li ke ke tsa hlola li lahloa e le litšila tsa masepala. baetsi ba lisebelisoa tsa elektroniki tse koahetsoeng ba tla tlameha ho khutlisa lihlahisoa tse joalo qetellong ea bophelo ba bona ba bohlokoa. MSI e tla ikamahanya le litlhoko tsa ho khutlisa sehlahisoa qetellong ea bophelo ba lihlahisoa tsa MSIbranded tse rekisetsoang EU. U ka khutlisetsa lihlahisoa tsena libakeng tsa pokello ea lehae.

India RoHS
Sehlahisoa sena se latela "India E-litšila (Tsamaiso le Tsamaiso) Molao oa 2011" mme e thibela tšebeliso ea lead, mercury, hexavalent chromium, polybrominated biphenyls
kapa diphenyl ether tsa polybrominated tse ding tse fetang 0.1 boima ba % le 0.01 boima ba % bakeng sa cadmium, ntle le mekgelo e behilweng ho Shejule 2 ya Molao.

Tsebiso ea Tokelo ea Tokelo le Matshwao a Khoebo
Copyright © Micro-Star Int'l Co., Ltd. Litokelo tsohle li sirelelitsoe. Letšoao la MSI le sebelisitsoeng ke lets'oao le ngolisitsoeng la Micro-Star Int'l Co., Ltd. Matshwao a mang kaofela le mabitso a boletsoeng e kanna ea ba matšoao a beng ba ona. Ha ho na tiisetso mabapi le ho nepahala kapa botlalo e hlahisoang kapa ho boleloa. MSI e na le tokelo ea ho etsa liphetoho tokomaneng ena ntle le tsebiso pele.

Tšehetso ea tekheniki
Haeba bothata bo hlaha ka sistimi ea hau mme ho se tharollo e ka fumanoang ho tataiso ea basebelisi, ka kopo ikopanye le sebaka sa hau sa theko kapa morekisi oa lehae. Ntle le moo, leka lisebelisoa tse latelang tsa thuso bakeng sa tataiso e eketsehileng.

• Etela MSI websebaka sa tataiso ea tekheniki, liapdeite tsa BIOS, liapdeite tsa mokhanni, le lintlha tse ling: http://www.msi.com
• Ngolisa sehlahisoa sa hau ho: http://register.msi.com

Nalane ea Phetoho

• Mofuta oa 1.0, 2022/10, Phatlalatso ea pele.

Litokomane / Lisebelisoa

MSI MPG Z790 EDGE WIFI DDR4 Motherboard [pdf] Bukana ea Mosebelisi MPG Z790 EDGE WIFI DDR4 Motherboard, MPG Z790, EDGE WIFI DDR4 Motherboard, WIFI DDR4 Motherboard, DDR4 Motherboard, Motherboard

Litšupiso

• Bukana ea Mosebelisi