Lethathamo la lintlha tsa EDS-G4008
Tataiso ea ho Kenya ka Potlako
Moxa EtherDevice™ Switjha
Phetolelo ea 1.1 Pulungoana 2022
Information Support Contact Information
www.moxa.com/support
Lethathamo la Pakete
EDS-G4008 Series indasteri ea DIN-rail EtherDevice Switch (EDS) e romelloa ka lintho tse latelang. Haeba e 'ngoe ea lintho tsena e le sieo kapa e senyehile, ka kopo ikopanye le moemeli oa litšebeletso tsa bareki bakeng sa thuso.
- 1 EDS-G4008 Ethernet switch
- Tataiso ea ho kenya kapele (e hatisitsoe)
- Karete ea tiisetso
- Tafole ea phatlalatso ea lithethefatsi
- Setifikeiti sa sehlahisoa sa tlhahlobo ea boleng (Sechaena se Nolofalitsoeng)
- Litsebiso tsa sehlahisoa (Sechaena se Nolofalitsoeng)
HLOKOMELA U ka fumana tlhaiso-leseling le khoarollo ea software maqepheng a amehang a sehlahisoa a fumanehang ho Moxa's websebaka: www.moxaok.net
Litlhophiso tsa kamehla
- Aterese ea IP: 192.168.127.253
- Subnet Mask: 255.255.255.0
- Username: admin
- Password: moxa
Phanele Views ea Letoto la EDS-G4008
Phanele e ka pele View
- 1000BaseT(X) Letšoao la LED
- 10/100BaseT(X) Letšoao la LED
- 10/100/1000BaseT(X), likou tsa 1 ho isa ho tse 8
- Sekoti sa sehokelo sa fatše
- Li-terminal blocks bakeng sa ho kenya motlakase, ho kenya dijithale, le tlhahiso ea relay
- Lipontšo tsa LED: STATE (S), FAULT (F), PWR1 (P1), PWR2 (P2), MSTR/HEAD (M/H), CPLR/TAIL (C/T), SYNC
- Console port (RJ45, RS-232)
- Boema-kepe ba polokelo ea USB (mofuta oa A, o koetsoeng hajoale)
- Lebitso la mohlala
Phanele e ka tlase View
- sekotjana sa karete ea microSD (hajoale se holofetse)
- Seta botjha konopo
- Li-switches tsa DIP bakeng sa Turbo Ring, Ring Master, le Ring Coupler
Mounting Dimensions
DIN-rail Mounting
Thepa ea DIN-rail mounting kit e ts'oaretsoe karolong e ka morao ea sesebelisoa sa EDS ha u e ntša ka lebokoseng. Hloma sesebelisoa sa EDS holim'a liporo tse ntseng li hola tsa corrosionfree tse fihlelang maemo a EN 60715.
Ho kenya
MOHATO 1-Kenya molomo o ka holimo oa seporo sa DIN ka har'a khiti e ntseng e hola ea DIN-rail.
MOHATO 2- Tobetsa sesebelisoa sa EDS ho leba seporong sa DIN ho fihlela se kena sebakeng.
Ho tloswa
MOHATO 1-Hula sekoti holim'a khiti e ntseng e phahama ka screwdriver.
MOHATO 2 & 3-Hula sesebelisoa sa EDS pele hanyane 'me u phahamisetse ho se tlosa seporong sa DIN.
HLOKOMELA Setsi sa rona sa terene sa DIN hona joale se sebelisa mokhoa oa ho lokolla kapele ho nolofalletsa basebelisi ho tlosa seporo sa DIN ho sesebelisoa sa EDS.
Ho Beha Lebota (Ha ho boikhethelo)
Bakeng sa lits'ebetso tse ling, u tla fumana ho le bonolo ho beha sesebelisoa sa Moxa EDS leboteng, joalo ka ha ho bonts'itsoe lipapisong tse latelang:
MOHATO 1-Tlosa poleiti e khomaretsoeng ea DIN-rail karolong e ka morao ea sesebelisoa sa EDS, ebe u hokela lipoleiti tsa lebota ka li-screws tsa M3.
MOHATO 2—Ho hloma sesebediswa sa EDS leboteng ho hloka dikurufu tse nne. Sebelisa sesebelisoa sa EDS, se kentsoeng lipoleiti tsa lebota. Lihlooho tsa li-screws li lokela ho ba ka tlase ho 6.0 mm ka bophara, 'me li-shaft li lokela ho ba ka tlase ho 3.5 mm ka bophara, joalokaha ho bontšitsoe setšoantšong se ka ho le letona.
HLOKOMELA Pele o tiisa li-screw leboteng, etsa bonnete ba hore hlooho ea sekoti le boholo ba shank li loketse ka ho kenya sekoti ho e 'ngoe ea li-apertures tse bōpehileng joaloka lesoba la Lebota.
HLOKOMELA Se ke oa phurula li-screw ka hohle-hohle-tlohela hoo e ka bang 2 mm ho lumella sebaka sa ho thellelisa lerako la ho holisa lebota lipakeng tsa lebota le likurufu.
MOHATO 3-Ha li-screws li se li tsitsitse leboteng, kenya li-screw heads tse 'nè ka har'a likarolo tse pharaletseng tsa li-apertures tse nang le senotlolo, ebe u thellela sesebelisoa sa EDS tlase, joalokaha ho bontšitsoe setšoantšong se ka ho le letona. Tiisa li-screws tse 'nè bakeng sa botsitso bo eketsehileng.
Litlhoko tsa Wiring
TLHOKOMELO
Tšireletseho Pele!
Likarolo tsa tšepe tse kantle li chesa. Nka mehato e hlokahalang ea ho itšireletsa haeba ho hlokahala hore u sebetsane le sesebelisoa.
TLHOKOMELO
E le ho netefatsa ts'ebetso e ts'epahalang, ka kopo etsa bonnete ba hore mocheso oa ts'ebetso oa tikoloho ha o fete litekanyo. Ha o kenya sesebelisoa sa EDS se nang le likarolo tse ling tsa ts'ebetso ka har'a khabinete ntle le moea o qobelloang, bonyane sebaka sa 4 cm ka lehlakoreng le letšehali le le letona la switch se khothaletsoa.
TLHOKOMELO
Tšireletseho Pele!
Netefatsa hore o hakolla thapo ea motlakase pele o kenya le/kapa o hokela sesebediswa sa hao sa EDS. Bala boholo bo ka khonehang terateng e 'ngoe le e 'ngoe ea motlakase le terata e tloaelehileng. Ela hloko likhoutu tsohle tsa motlakase tse laelang boholo ba hajoale bo lumelletsoeng bakeng sa saese ka 'ngoe ea terata. Haeba hona joale ho feta litekanyetso tse phahameng, wiring e ka chesa haholo, ea baka tšenyo e kholo ho thepa ea hau.
Etsa bonnete ba hore u bala le ho latela lintlha tsena tsa bohlokoa ka tlase:
- Sebelisa litsela tse arohaneng ho tsamaisa lithapo bakeng sa motlakase le lisebelisoa. Haeba lithapo tsa motlakase le litsela tsa lisebelisoa li tlameha ho tšela, etsa bonnete ba hore lithapo li perpendicular sebakeng sa mateano.
HLOKOMELA Se ke oa kenya mehala ea mats'oao kapa likhokahano le likhoele tsa motlakase ka kotopo e tšoanang ea terata. Ho qoba tšitiso, lithapo tse nang le litšobotsi tse fapaneng tsa matšoao li lokela ho tsamaisoa ka thoko.
- U ka sebelisa mofuta oa lets'oao le fetisoang ka mohala ho fumana hore na ke lithapo life tse lokelang ho aroloa. Molao oa monoana ke hore likhoele tse nang le litšobotsi tse tšoanang tsa motlakase li ka kopanngoa hammoho.
- O lokela ho arola wiring e kenang ho tsoa ho wiring e tsoang.
- Re u eletsa hore u behe lithapo ho lisebelisoa tsohle tsa sistimi ea hau.
Ho theha Letoto la Moxa EDS
Ho beha fatše le ho tsamaisa terata ho thusa ho fokotsa litlamorao tsa lerata ka lebaka la tšitiso ea motlakase (EMI). Matha khokahanyo ea fatše ho tloha holim'a sekoti sa fatše (M4) ho ea sebakeng se fatše pele u kopanya lisebelisoa.
HLOKOMELA Mohala oa fatše o lokela ho ba bonyane bophara ba 1.5 mm².
TLHOKOMELO
Sehlahisoa sena se reretsoe ho behoa sebakeng se hloekisitsoeng hantle se kang setsi sa tšepe.
Keletso ea Mofuta oa Mohala bakeng sa Khokahano ea Wiring Relay Contact (RELAY), Digital Input (DI), le Power Inputs (P1/P2)
Sesebelisoa sa EDS se kenyelletsa li-terminals tse peli tsa 4-pins 3.5 mm pin-pitch. Ha o kenya mohala oa relay (RELAY), digital input (DI), le lisebelisoa tsa matla (P1 / P2), re fana ka tlhahiso ea ho sebelisa mofuta oa cable AWG 18-24 le li-terminals tsa mofuta oa pini tse tsamaellanang.
HLOKOMELA Mohala o tlameha ho mamella bonyane 105 ° C mme boleng ba torque e lokela ho ba 4.5 lb-in (0.51 Nm).
HLOKOMELA Re fana ka maikutlo a hore bolelele ba terminal ea mofuta oa pini ke 8 mm. E le ho tiisa terata hantle, ① sebelisa screwdriver e nyane ea flathead ho tobetsa konopo ea ho sututsa ka thoko ho terminal ka 'ngoe ea sehokelo sa block block pele le nakong ② ho kenya terata. ③ Tlosa screwdriver ka mor'a hore terata e kenngoe ka botlalo. Ka kopo sheba setšoantšo se ka tlase.
Ho thaepa Lebitso la Relay
Sesebelisoa sa EDS se na le sete e le 'ngoe ea tlhahiso ea relay. Lebitso lena la relay le sebelisa likhokahano tse peli tsa "terminal block" mojuleng oa matla oa EDS. Sheba karolo bakeng sa litaelo tse qaqileng tsa mokhoa oa ho hokela lithapo ho sehokelo sa li-terminal block, le mokhoa oa ho hokela sehokelo sa terminal block receptor.
Lesokoana:
Likhokahano tse peli tsa sehokelo sa li-terminal block tsa 4-pin li sebelisetsoa ho bona liketsahalo tse hlophisitsoeng ke basebelisi. Lithapo tse peli tse khomaretsoeng ho li-contacts tsa phoso li theha potoloho e bulehileng ha ketsahalo e entsoeng ke mosebedisi e hlahisoa kapa ho se na matla a ho fetola. Haeba ketsahalo e hlophisitsoeng ea mosebelisi e sa etsahale, potoloho ea phoso e lula e koetsoe.
Ho Kenya Mehala ea Matla a sa Hlokehang
Sesebelisoa sa EDS se kenyelletsa bobeli bo phahamengtage le low-voltaglihlahisoa tsa e. Bakeng sa molumo o tlasetage (mefuta ea LV) lihlahisoa, ho na le lisebelisoa tse peli tsa matla bakeng sa ho fokotsa mosebetsi; bakeng sa matla a phahamengtaglihlahisoa tsa e (HV model), ho na le motlakase o le mong feela. Sheba litaelo le setšoantšo se ka tlase mabapi le mokhoa oa ho hokahanya lithapo le sehokelo sa li-terminal block sehokelong sa receptor.
MOHATO 1: Kenya lithapo tse Positive/Negative DC kapa Line/Neutral AC liteisheneng tsa V+/V- kapa L/N, ka ho latellana.
MOHATO 2: Ho thibela mehala ea DC kapa ea AC hore e se ke ea theoha, sebelisa screwdriver e nyane ea flatblade ho tiisa wirecl.amp dikurufu ka pele ho sehokedi sa boloko ba theminale.
MOHATO 3: Kenya li-prong tsa sehokelo sa li-terminal block tsa polasetiki ho terminal block receptor, e ka lehlakoreng le letona la lisebelisoa tsa EDS.
Ho thaepa Lisebelisoa tsa Dijithale
Sesebelisoa sa EDS se na le sete e le 'ngoe ea lisebelisoa tsa digital (DI). DI e na le likhokahano tse peli tsa sehokelo sa li-terminal block tsa 4-pin ka lehlakoreng le letona la EDS. Sheba litaelo le setšoantšo se ka tlase mabapi le mokhoa oa ho hokahanya lithapo le sehokelo sa li-terminal block sehokelong sa receptor.
MOHATO 1: Kenya lithapo tse mpe (fatše)/positive DI ho li-terminals tsa ┴/I, ka ho latellana.
MOHATO 2: Ho thibela lithapo tsa DI hore li se ke tsa theoha, sebelisa screwdriver e nyane e nang le lehare ho tiisa terata.amp konopo e ka pele ho sehokelo sa block block.
MOHATO 3: Kenya li-prong tsa sehokelo sa li-terminal block tsa polasetiki ho terminal block receptor, e ka lehlakoreng le letona la lisebelisoa tsa EDS.
Ho potoloha Module ea Matla
Mojule oa matla oa sesebelisoa sa EDS o ka fetoloa ho etsa hore ho be bonolo ho lumellana le ts'ebeliso ea sebaka sa hau sa tšimo.
Mohato oa 1: Tlosa li-screws tse peli tse tiisang mojule oa matla ho sesebelisoa sa EDS ebe o tlosa module.
Mohato oa 2: Fetolela mojule oa matla ho ea ka oache e le hore motlakase, kenyelletso ea dijithale, le likhokahano tse tsoang ho relay li ka isoa holimo.
Mohato oa 3: Khutlisa mojule ho sesebelisoa sa EDS.
Mohato oa 4: Tlamella li-screws tse peli ho module.
Likhokahano tsa Puisano
Sesebelisoa se seng le se seng sa EDS-G4008 Series se na le mefuta e fapaneng ea likou tsa puisano:
- RJ45 console port (RS-232 interface)
- Boema-kepe ba polokelo ea USB (sehokelo sa mofuta oa A, se koetsoeng hajoale)
- 10/100/1000BaseT(X) likou tsa Ethernet
- sekotjana sa karete ea microSD (hajoale se holofetse)
Khokahano ea Port Port
Sesebelisoa sa EDS se na le kou e le 'ngoe ea li-console ea RJ45 (RS-232), e sebakeng se ka pele. Sebelisa RJ45-to-DB9 (sheba thapo e latelang litšoantšo tsa wiring) ho hokela koung ea khomphutha ea EDS boema-kepeng ba COM ea PC ea hau.
U ka sebelisa lenaneo la "console terminal", joalo ka Moxa PCm Terminal Emulator, ho fihlella EDS e nang le sekhahla sa baud sa 115200.
RJ45 Console Port pinouts
| Pin | Tlhaloso |
| 1 | DSR |
| 2 | RTS |
| 3 | - |
| 4 | TxD |
| 5 | RxD |
| 6 | GND |
| 7 | CTS |
| 8 | DTR |
Khokahano ea USB
HLOKOMELA Ts'ebetso ea USB ha joale e bolokiloe 'me e ka hlokoa nakong e tlang. Hoa lokela ho hlokomeloa hore kou ena e ke ke ea sebelisoa bakeng sa ho tjhaja lisebelisoa leha e le life.
1000BaseT(X) Khokelo ea Boema-kepe ba Ethernet
Lintlha tsa 1000BaseT(X) li fetisoa ka lipara tse fapaneng tsa TRD+/- holim'a lithapo tsa koporo.
MDI/MDI-X Port pinouts
| Pin | Letshwao |
| 1 | TRD(0)+ |
| 2 | TRD(0)- |
| 3 | TRD(1)+ |
| 4 | TRD(2)+ |
| 5 | TRD(2)- |
| 6 | TRD(1)- |
| 7 | TRD(3)+ |
| 8 | TRD(3)- |
Seta Botjha Konopo
Ho na le mesebetsi e 'meli e fumanehang ho Konopo ea Reset. E 'ngoe ke ho seta bocha switch ea Ethernet ho li-setting tsa kamehla tsa feme ka ho tobetsa le ho ts'oara konopo ea Reset bakeng sa metsotsoana e 5. Sebelisa ntho e nchocho, joalo ka sekotwana sa pampiri se otlolohileng kapa toothpick, ho hatella konopo ea Reset. Sena se tla etsa hore STATE LED e panye hang ka motsotsoana. Kamora ho hatella konopo bakeng sa metsotsoana e 5 e tsoelang pele, STATE LED e tla qala ho panya ka potlako. Sena se bontša hore litlhophiso tsa kamehla tsa feme li kentsoe 'me u ka lokolla konopo ea reset. Mosebetsi o mong ke ho tsosolosa sesebelisoa ka ho hatella konopo ea reset bakeng sa metsotsoana e mehlano.
Turbo Ring DIP Switch Settings
Lisebelisoa tsa EDS ke li-switch tsa Ethernet tse laoloang ke plug-and-play. Proprietary Turbo Ring protocol e entsoe ke Moxa ho fana ka ts'epo e ntle ea marang-rang le nako ea ho hlaphoheloa kapele. Nako ea ho hlaphoheloa ea Moxa Turbo Ring e ka tlase ho 50 ms (Turbo Ring V2) - ha e bapisoa le nako ea ho hlaphoheloa ea metsotso e 3 ho isa ho e 5 bakeng sa li-switches tsa khoebo - e fokotsa tahlehelo e ka bakoang ke ho hlōleha ha marang-rang sebakeng sa indasteri.
Ho na le Liphetoho tse hlano tsa Hardware DIP bakeng sa Turbo Ring karolong e ka tlaase ea mochine oa EDS e ka thusang ho hlophisa Turbo Ring habonolo ka mor'a metsotsoana. Haeba u sa batle ho sebelisa sesebelisoa sa DIP sa Hardware ho seta Ring ea Turbo, u ka sebelisa a web sebatli, telnet, kapa console ho tima tšebetso ena.
HLOKOMELA Ka kopo sheba karolo ea Turbo Ring ho Buka ea Mosebelisi bakeng sa lintlha tse ling mabapi le tlhophiso le ts'ebeliso ea Turbo Ring V2.
Turbo Ring DIP Switch Settings
Tlhophiso ea kamehla bakeng sa Switch ka 'ngoe ea DIP e TIMA. Tafole e latelang e hlalosa phello ea ho beha DIP Switjha ho boemo ba ON.
Tlosa sekoaelo sa rabara karolong e ka tlaase ea sesebelisoa ho pepesa li-switches tsa DIP.
DIP Switch Settings
| KOTSA 1 | KOTSA 2 | KOTSA 3 | KOTSA 4 | KOTSA 5 |
| E boloketsoe tšebeliso ea nako e tlang | BULELA: E nolofalletsa ho | BULELA: E nolofalletsa | BULELA: | BULELA: E kenya tshebetsong |
| kamehla "Ring Coupling (bekapo)" koung ha DIP switjha 4 e se e kentsoe tšebetsong. TIMA: E nolofalletsa ho | EDS ena e le Ring Master. TIMA: Sena | E nolofalletsa "Ring Coupling" ea kamehla yort. TIMA: Sena | DIP switjha 2, 3, le 4 ho lokisa Turbo Ring V2 litlhophiso. - TIMA: DIP | |
| default Ring Coupling (ea mantlha) kou ha DIP switjha 4 e se e butswe. | EDS e ke ke ea e-ba Ring Master. | EDS e ke ke ea e-ba Ring Coupler. | switjha 2, 3, le 4 e tla holofala. |
HLOKOMELA O tlameha ho bulela Turbo Ring (DIP switjha 5) pele pele o sebedisa switjha ya DIP ho kenya tshebetsong tshebetso ya Master le Coupler.
HLOKOMELA Haeba u sa lumelle li-switches tsa EDS hore e be Ring Master, protocol ea Turbo Ring e tla ikhethela switch ea EDS e nang le lethathamo le lenyenyane la liaterese tsa MAC hore e be Ring Master. Haeba ka phoso o ka etsa hore switjha e fetang e le 'ngoe e be Ring Master, li-switches tsena li tla buisana ka bo eona ho fumana hore na ke ofe eo e tla ba Ring Master.
Lipontšo tsa LED
Karolo e ka pele ea Moxa EDS-G4008 Series e na le matšoao a 'maloa a LED. Mosebetsi oa LED ka 'ngoe o hlalosoa tafoleng e latelang:
Lisebelisoa tsa lisebelisoa tsa LED
| LED | Mmala | Naha | Tlhaloso |
| TŠEBELETSO |
Botala |
On |
Ha sistimi e se e fetile tlhahlobo ea matla a ho itlhahloba (POST) mme e se e loketse ho sebetsa. |
| Ho panya (1 nako/mots.) | Tobetsa konopo ea reset bakeng sa metsotsoana e mehlano ho seta bocha ho li-setting tsa kamehla tsa feme | ||
| Ho panya (Makhetlo a 4 / set lao) | Ha o tobetsa konopo ea reset, hatelle metsotsoana e 5 ho khutlela fekthering ea kamehla. | ||
| E tima | N/A | ||
|
Khubedu |
On |
Sistimi e hlolehile ho qala ts'ebetso ea ho qala
• Tsamaiso Info. Bala phoso ea Fail kapa EEPROM ea tlhaiso-leseling |
|
| PHOTO |
Khubedu |
On |
1. Khokahano ea relay e hlahisitsoe 2. Moeli oa sekhahla sa ho kena o fetisitsoe mme boema-kepe bo kene mokhoeng oa ho koala 3. Khokelo e sa sebetseng ea Ring port |
|
E tima |
Ha sistimi e qala mme e sebetsa ka nepo kapa ketsahalo e hlophisitsoeng ke mosebelisi ha e bakoe. | ||
| P1 | Amber | On | Matla a ntse a fanoa ho PWR ea motlakase. |
| E tima | Matla ha a fanoe ho PWR ea motlakase. | ||
| P2 | Amber | On | Matla a ntse a fanoa ho PWR ea motlakase. |
| E tima | Matla ha a fanoe ho PWR ea motlakase. |
| LED | Mmala | Naha | Tlhaloso |
|
MSTR/ HLOOHO (M/H) |
Botala |
On |
Ha switjha e le Master/Head/Root of Turbo Ring/Turbo Chain/Fast RSTP. |
|
Ho panya (Makhetlo a 4 / set lao) |
1. Phetoho e fetohile Monghali oa Turbo Ring ka mor'a hore Turbo Ring e theohe 2. Sesebelisoa se behiloe e le Hlooho ea Turbo Chain le Turbo Chain e theohile 3. Phetoho e behiloe e le Setho sa Ring ea Turbo mme Ring port e tsamaisanang e theohile 4. Switjha e behilwe e le Setho/ Mohatla wa Turbo Chain mme boemakepe bo tsamaelanang le Head-end Chain bo theohile. |
||
| E tima | Ha switjha e se Monghali/Hlooho/Motso oa Ring ena ea Turbo/ Turbo Chain/Fast RSTP. | ||
| CPLR/ MOELA | Botala | On | 1. Ho kopanya lesale la switjha kapa ts'ebetso e 'meli ea homing e nolofalitsoe. 2. Phetoho e behiloe e le Mohatla oa Turbo Chain. |
|
Ho panya (Makhetlo a 4 / set lao) |
1. Sesebelisoa se behiloe ha Mohatla oa Turbo Chain le Chain e theohile. 2. Switjha e behilwe e le Setho/ Hlooho ya Turbo Chain le e tsamaelanang Boema-kepe ba Chain ea mohatla bo theohile. |
||
| E tima | Ha sesebelisoa se tima karolo ea ho kopanya kapa mohatla oa Turbo Chain. | ||
| Tsamaiso LED (Ntle PWR) | Botala + Amber + Bokhubelu | Ho panya
(Makhetlo a 2 / set lao) |
Sesebelisoa se ntse se sibolloa / se fumaneha ke ts'ebetso ea sebaka. |
| Tsamaiso LED (Ntle PWR) | Botala + Amber + Bokhubelu | Fetola -> Koala Ka tatellano | Phetoho ke ho kenya / ho romela thepa a file ka ABC-02-USB kapa karete ea SD (e holofetseng hajoale). |
Lipontšo tsa li-Ports LED
| LED | Mmala | Naha | Tlhaloso |
| 10M / 100M / 1000M Koporo ka holimo LED | Botala | On | Ha boema-kepe bo sebetsa 'me bo hokela ho 1000Mbps. |
| Ho panya (Makhetlo a 4 / set lao) | Ha data ea boema-kepe e ntse e fetisoa ho 1000Mbps. | ||
| E tima | Ha boema-kepe bo sa sebetse kapa hokela tlase. | ||
| 10M / 100M / 1000M Koporo tlase LED | Amber | On | Ha boema-kepe bo sebetsa 'me bo hokela ho 10/100Mbps. |
| Ho panya (4 linako/motsotsoana) | Ha data ea boema-kepe e ntse e fetisoa ho 10/100Mbps. | ||
| E tima | Ha boema-kepe bo sa sebetse kapa hokela tlase. |
Litlhaloso
| Sehokedi | |
| R345 Boema-kepe | 10/100/1000BaseT(X) |
| Kou ea Console | RS-232 (R345) |
| Konopo | Seta botjha konopo |
| Lipontšo tsa LED | SEBAKA (LI-), MPHOTO (F), PWR1 (P1), PWR2 (P2), MSTR/HLOOHO (M/H), CPLR/MOHATLA (C/T), SYNC |
| Lebitso la Alamo | 1 ka tloaelo e bula tlhahiso ea relay ea motlakase e nang le matla a hona joale a 1 A 0 24 VDC |
| Input ea dijithale | Kenyeletso e le 'ngoe ea dijithale e ikhethileng: +1 ho +13V bakeng sa boemo "30" -1 ho +30V bakeng sa boemo ba "3" Max. hona joale ho kenya: 0 mA |
| Matla | |
| Module ea Matla e kentsoeng esale pele | -LV/-LV-T mefuta: PWR-100-LV -HV/-HV-T mefuta: PWR-105-HV-I |
| Hlokomela | Letoto la EDS-G4008 le ts'ehetsa phepelo ea motlakase ea modular. Mabitso a mohlala le li-parameter tsa matla li khethoa ke module ea matla e kentsoeng. Bakeng sa mohlalaampLe: EDS-G4008-T + PWR-100-LV = EDS-G4008-LV-T EDS-G4008-T + PWR-105-HV-I = EDS-G4008-HVT Haeba u kenya mochine o fapaneng oa matla, sheba litlhaloso tsa mohlala o lumellanang. Bakeng sa mohlalaample, haeba u nkela sebaka sa motlakase oa EDS-G4008-LV-T ka PWR-105-HV-I, bua ka litlhaloso tsa EDS-G4008-HV-T. |
| E lekantsoe Voltage | Mefuta ea -LV/-LV-T: 12/24/48 VDC, lisebelisoa tse peli tse sa hlokahaleng -HV/-HV-T mehlala: 110/220 VDC/VAC, kenyeletso e le 'ngoe |
| Tshebetso Voltage | -LV/-LV-T mehlala: 9.6 ho 60 VDC -HV/-HV-T mefuta: 88 ho 300 VDC, 85 ho 264 VAC |
| E lekantsoe Hona Joale | -LV/-LV-T mehlala: 12-48 VDC, 1.50-0.40 A kapa 24 VDC, 0.70 A -HV/-HV-T mefuta: 110-220 VAC, 50-60 Hz, 0.30 A kapa 0.20-110 VDC, 220-0.30 A |
| Matla
Tshebediso |
Mefuta ea EDS-G4008-LV(-T): 8.84 W
Mefuta ea EDS-G4008-HV(-T): 10.73 W |
| Inrush Current | Max. 0.58 A @ 48 VDC (0.1 – 1 ms) (E sebelisoa ho – mefuta ea LV) |
| Tlatsa Tšireletso ea Hona Joale Ha U Kena | Hlahisa |
| Khutlela Polarity
Tshireletso |
Hlahisa |
| Khokahano | Li-terminals tse 2 tse ka tlosoang tse 4 |
| Litšobotsi Tsa 'Mele | |
| Matlo | Tšireletso ea tšepe, IP40 |
| Boemo | 55 x 140 x 120 mm (2.17 x 5.51 x 4.72 in) |
| Boima ba 'mele | 859.5 dikgerama (1.89 lb) |
| Ho kenya | Ho hlomamisoa ka DIN-rail, ho kenya lebota (ka khiti ea boikhethelo) |
| Meeli ea Tikoloho | |
| Ho sebetsa
Mocheso |
-10 ho 60 ° C (14 ho 140 ° F) bakeng sa mehlala e tloaelehileng
-40 ho 75 ° C (-40 ho 167 ° F) bakeng sa mefuta ea -T |
| Polokelo
Mocheso |
-40 ho isa ho 85°C (-40 ho isa ho 185°F) |
| Ambient Relative Humidity | 5 ho isa ho 95% (ha e fokotsehe) |
| Bophahamo | Ho fihlela ho 2000 m
Tlhokomeliso: Ka kopo ikopanye le Moxa haeba u hloka lihlahisoa tse tiisitsoeng hore li tla sebetsa hantle sebakeng se phahameng. |
| Litumello tsa Taolo | |
| Indasteri
Cybersecurity |
IEC 62443-4-1, IEC 62443-4-2 |
| Polokeho | UL 61010-2-201, EN 62368-1(LVD) |
| EMC | EN 55032/35, EN 61000-6-2/6-4 |
| EMI | FCC Karolo ea 15 Karolo ea B Sehlopha sa A |
| EMS | EN 61000-4-2 (ESD) Mohato 4
EN 61000-4-3 (RS) Mohato 3 EN 61000-4-4 (EFT) Mohato 4 EN 61000-4-5 (Surge) Mohato 4 EN 61000-4-6 (CS) Mohato 3 EN 61000-4-8 Mohato oa 4 |
| Ho tshoha | Tlhaloso: IEC 60068-2-27 |
| Hoetla mahala | Tlhaloso: IEC 60068-2-32 |
| Ho thothomela | Tlhaloso: IEC 60068-2-6 |
| Sebaka se Kotsi | Sehlopha sa I Division 2, ATEX, IECEx |
| Sephethephethe sa Terene (Tselang) | EN 50121-4 |
| Taolo ea Sephethephethe | NEMA TS2 |
| Tiisetso | |
| Tiisetso | 5 lilemo |
TLHOKOMELO
Sesebelisoa sena se lumellana le Karolo ea 15 ea melao ea FCC.
Ts'ebetso e ipapisitse le maemo a latelang:
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi.
- Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.
Boitsebiso ba Sebaka se Kotsi (ntle le mefuta ea PoE le HV)
| Lintlha tsa ATEX | |
 II 3G Ex ec nC IIC T4 Gc |
|
| UL 22 ATEX 2741X Ambient Range: -40 ° C ≤ Tamb ≤ +75 ° C bakeng sa -T mehlala ea Ambient Range: -10 ° C ≤ Tamb ≤ +60 ° C bakeng sa mehlala ntle le "-T" Rated Cable Temp. ≥ 90.4°C TLHOKOMELISO-O SE KE UA AROHANA HA O HLAHISITSOE | |
| Setifikeiti sa IECEx No. | IECEx UL 22.0031X |
| Aterese ea moetsi | No. 1111, Heping Rd., Bade Dist., Taoyuan City 334004, Taiwan |
TLHOKOMELISO – KOTSI EA HO PHAHAMA
Se ke oa hakolla sesebelisoa sena ntle le haeba mohloli oa motlakase o tlositsoe kapa o tingoa, kapa sebaka sa ho kenya se tsejoa e le se seng kotsi.
Maemo le Litifikeiti
| Sebaka se Kotsi | Khatiso ea 60079 ea IEC 0-7 Khatiso ea 60079 ea IEC 7-5.1 Khatiso ea 60079 ea IEC 15-5 EN IEC 60079-0:2018 EN IEC 60079-7:2015+A1:2018 EN IEC 60079-15:2019 |
Boemo bo Ikhethileng ba Tšebeliso
- Lisebelisoa li tla sebelisoa feela sebakeng sa bonyane tekanyo ea 2 ea tšilafalo, joalo ka ha ho hlalositsoe ho IEC/EN 60664-1.
- Thepa e tla kengoa ka har'a moaho o fanang ka tšireletso e tlase ea IP 54 ho latela IEC/EN 60079-0 mme e fumaneha feela ka tšebeliso ea sesebelisoa.
©2022 Moxa Inc. Litokelo tsohle li sirelelitsoe.
P/N: 1802040080111
Litokomane / Lisebelisoa
 |
MOXA EDS-G4008 Series Moxa EtherDevice Switch [pdf] Tlhophiso Tataiso EDS-G4008 Series, EDS-G4008 Series Moxa EtherDevice Switch, Moxa EtherDevice Switch, EtherDevice Switch, Switch |
