MOXA EDS-4012 Series EtherDevice Switch

Lethathamo la Pakete

EDS-G4012 Series indasteri ea DIN-rail EtherDevice Switch (EDS) e romelloa ka lintho tse latelang. Haeba e 'ngoe ea lintho tsena e le sieo kapa e senyehile, ka kopo ikopanye le moemeli oa litšebeletso tsa bareki bakeng sa thuso.

• 1 EDS-G4012 Ethernet switch
• Tataiso ea ho kenya kapele (e hatisitsoe)
• Karete ea tiisetso
• Tafole ea phatlalatso ea lithethefatsi
• Setifikeiti sa sehlahisoa sa tlhahlobo ea boleng (Sechaena se Nolofalitsoeng)
• Litsebiso tsa sehlahisoa (Sechaena se Nolofalitsoeng)

HLOKOMELA U ka fumana tlhaiso-leseling le khoarollo ea software maqepheng a amehang a sehlahisoa a fumanehang ho Moxa's websebaka: www.moxaok.net

Litlhophiso tsa kamehla  

• Aterese ea IP: 192.168.127.253
• Subnet Shorts: 255.255.255.0
• Username: admin
• Lekunutu: moxa

Phanele Views ea Letoto la EDS-G4012

Phanele e ka pele View

1. 100BaseT(X) Letšoao la LED
2. 10BaseT(X) Letšoao la LED
3. 10/100BaseT(X) boema-kepe, boema-kepe ba 1 ho isa ho 8
4. 10/100/1000BaseT(X) kapa 100/1000BaseSFP combo koung, likou tsa G1 ho ea G4
5. 100/1000BaseSFP Letšoao la LED
6. 100/1000BaseSFP boema-kepe, boema-kepe ba G1 ho isa G4
7. Sekoti sa sehokelo sa fatše
8. Li-terminal blocks bakeng sa ho kenya motlakase, ho kenya dijithale, le tlhahiso ea relay
9. Lipontšo tsa LED: STATE (S), FAULT (F), PWR1 (P1), PWR2 (P2), MSTR/HEAD (M/H), CPLR/TAIL (C/T), SYNC
10. Console port (RJ45, RS-232)
11. Boema-kepe ba polokelo ea USB (mofuta oa A, o koetsoeng hajoale)
12. Lebitso la mohlala
13. SmartPoE LED pontšo ea PoE

Phanele e ka tlase View

1.  sekotjana sa karete ea microSD (hajoale se holofetse)
2. Seta botjha konopo
3. Li-switches tsa DIP bakeng sa Turbo Ring, Ring Master, le Ring Coupler

Mounting Dimensions

DIN-rail Mounting

Thepa ea DIN-rail mounting kit e ts'oaretsoe karolong e ka morao ea sesebelisoa sa EDS ha u e ntša ka lebokoseng. Kenya sesebelisoa sa EDS holim'a liporo tse se nang kutu tse lumellanang le maemo a EN 60715.

Ho kenya

MOHATO 1-Kenya molomo o ka holimo oa seporo sa DIN ka har'a khiti ea ho holisa ea DIN-rail.
MOHATO 2-Tobetsa sesebelisoa sa EDS se lebile seporong sa DIN ho fihlela se kena sebakeng. Ho tloswa

MOHATO 1-Hula latch holim'a khiti e ntseng e phahama ka screwdriver.
MOHATO 2 & 3—Hula sesebelisoa sa EDS pele hanyane 'me u phahamisetse holimo ho se tlosa seporong sa DIN.HLOKOMELA Setsi sa rona sa terene sa DIN hona joale se sebelisa mokhoa oa ho lokolla kapele ho nolofalletsa basebelisi ho tlosa seporo sa DIN ho sesebelisoa sa EDS.

Ho Beha Lebota (Ha ho boikhethelo)

Bakeng sa lits'ebetso tse ling, u tla fumana ho le bonolo ho beha sesebelisoa sa Moxa EDS leboteng, joalo ka ha ho bonts'itsoe lipapisong tse latelang:

• MOHATO 1-Tlosa poleiti ea sekhomaretsi ea aluminium ea DIN-rail ho phanele e ka morao ea sesebelisoa sa EDS, joalo ka ha ho bontšitsoe setšoantšong se ka ho le letona.
• MOHATO 2-Ho beha sesebelisoa sa EDS leboteng ho hloka li-screw tse tšeletseng. Sebelisa sesebelisoa sa EDS, se nang le lipoleiti tsa lebota tse khomaretsoeng, e le tataiso ea ho tšoaea libaka tse nepahetseng tsa likurufu tse tšeletseng. Lihlooho tsa li-screws li lokela ho ba ka tlase ho 6.0 mm ka bophara, 'me li-shaft li lokela ho ba ka tlase ho 3.5 mm ka bophara, joalokaha ho bontšitsoe setšoantšong se ka ho le letona.HLOKOMELA Pele o tiisa li-screw leboteng, etsa bonnete ba hore hlooho ea sekoti le boholo ba shank li loketse ka ho kenya sekoti ho e 'ngoe ea li-apertures tse bōpehileng joaloka lesoba la Lebota.
  HLOKOMELA Se ke oa phurula li-screw ka hohle-hohle-tlohela limilimithara tse ka bang 2 ho lumella sebaka sa ho thellela lerako la lebota pakeng tsa lebota le likurufu.
• MOHATO 3-Hang ha li-screws li se li tsitsitse leboteng, kenya li-screw heads tse 'nè likarolong tse pharaletseng tsa li-apertures tse bōpehileng joaloka lesoba, ebe u thellela sesebelisoa sa EDS tlase, joalokaha ho bontšitsoe setšoantšong se ka ho le letona. Tiisa li-screws tse 'nè bakeng sa botsitso bo eketsehileng.

Litlhoko tsa Wiring

Tšireletseho Pele!
Likarolo tsa tšepe tse kantle li chesa. Nka mehato e hlokahalang ea ho itšireletsa haeba ho hlokahala hore u sebetsane le sesebelisoa.
TLHOKOMELO
E le ho netefatsa ts'ebetso e ts'epahalang, ka kopo etsa bonnete ba hore mocheso oa ts'ebetso oa tikoloho ha o fete litekanyo. Ha o kenya sesebelisoa sa EDS se nang le likarolo tse ling tsa ts'ebetso ka har'a khabinete ntle le moea o qobelloang, bonyane sebaka sa 4 cm ka lehlakoreng le letšehali le le letona la switch se khothaletsoa.
Tšireletseho Pele!
Netefatsa hore o hakolla thapo ea motlakase pele o kenya le/kapa o hokela sesebediswa sa hao sa EDS. Bala boholo bo ka khonehang terateng e 'ngoe le e 'ngoe ea motlakase le terata e tloaelehileng. Ela hloko likhoutu tsohle tsa motlakase tse laelang boholo ba hajoale bo lumelletsoeng bakeng sa saese ka 'ngoe ea terata. Haeba hona joale ho feta litekanyetso tse phahameng, wiring e ka chesa haholo, ea baka tšenyo e kholo ho thepa ea hau.

Etsa bonnete ba hore u bala le ho latela lintlha tsena tsa bohlokoa ka tlase:

• Sebelisa litsela tse arohaneng ho tsamaisa lithapo bakeng sa motlakase le lisebelisoa. Haeba lithapo tsa motlakase le litsela tsa lisebelisoa li tlameha ho tšela, etsa bonnete ba hore lithapo li perpendicular sebakeng sa mateano.
  ELA HLOKO Se ke oa kenya lithapo tsa lets'oao kapa likhokahano le likhoele tsa motlakase ka kotopong e ts'oanang ea terata. Ho qoba tšitiso, mehala e nang le litšobotsi tse fapaneng tsa matšoao e lokela ho tsamaisoa ka thoko.
• U ka sebelisa mofuta oa lets'oao le fetisoang ka mohala ho fumana hore na ke lithapo life tse lokelang ho aroloa. Molao oa monoana ke hore likhoele tse nang le litšobotsi tse tšoanang tsa motlakase li ka kopanngoa hammoho.
• O lokela ho arola wiring e kenang ho tsoa ho wiring e tsoang.
• Re u eletsa hore u behe lithapo ho lisebelisoa tsohle tsa sistimi ea hau.

Ho theha Letoto la Moxa EDS

Ho beha fatše le ho tsamaisa terata ho thusa ho fokotsa litlamorao tsa lerata ka lebaka la tšitiso ea motlakase (EMI). Matha khokahanyo ea fatše ho tloha ho sekoti sa fatše ho ea sebakeng se fatše pele u kopanya lisebelisoa.
TLHOKOMELO
Sehlahisoa sena se reretsoe ho behoa sebakeng se hloekisitsoeng hantle se kang setsi sa tšepe.

Tlhahiso ea Mofuta oa Wiring bakeng sa Khokahano ea Wiring Relay
(R), Kenyo ya Dijithale (DI), le Dikenyo tsa Matla (P1/P2)
Sesebelisoa sa EDS se kenyelletsa li-terminals tse peli tsa 4-pins 3.5 mm pin-pitch. Ha o kenya mohala oa relay (R), digital input (DI), le lisebelisoa tsa matla (P1 / P2) bakeng sa sesebelisoa sa EDS, re fana ka maikutlo a ho sebelisa mofuta oa cable - AWG 18-24 le li-terminals tsa mofuta oa pini tse tsamaellanang.
HLOKOMELA Mohala o tlameha ho mamella bonyane 105 ° C mme boleng ba torque e lokela ho ba 4.5 lb-in (0.51 Nm).
HLOKOMELA Re fana ka maikutlo a hore bolelele ba terminal ea mofuta oa pini ke 8 mm. E le ho tiisa terata ka nepo, ① sebelisa screwdriver e nyane ea flathead ho tobetsa konopo ea ho kena ka thoko ho terminal e 'ngoe le e 'ngoe ea sehokelo sa "terminal block" pele le nakong ② ho kenya terata. ③ Lokolla screwdriver ka mor'a hore terata e kenngoe ka botlalo. Ka kopo sheba setšoantšo se ka tlase.

Ho thaepa Lebitso la Relay

Sesebelisoa sa EDS se na le sete e le 'ngoe ea tlhahiso ea relay. Lebitso lena la relay le sebelisa likhokahano tse peli tsa "terminal block" mojuleng oa matla oa EDS. Sheba karolo bakeng sa litaelo tse qaqileng tsa mokhoa oa ho hokela lithapo ho sehokelo sa li-terminal block, le mokhoa oa ho hokela sehokelo sa terminal block receptor. Lesokoana:
Mabitso a mabeli a 4-pin terminal block connector a sebelisetsoa ho bona liketsahalo tse hlophisitsoeng ke mosebedisi. Lithapo tse peli tse khomaretsoeng ho khokahanyo ea relay li theha potoloho e bulehileng ha ketsahalo e hlophisitsoeng ke mosebedisi e hlahisoa kapa ho se na matla a motlakase ho sesebelisoa. Haeba ketsahalo e hlophisitsoeng ke mosebelisi e sa etsahale, potoloho ea relay e lula e koetsoe.

Ho Kenya Mehala ea Matla a sa Hlokehang
Sesebelisoa sa EDS se kenyelletsa bobeli bo phahamengtage le low-voltaglihlahisoa tsa e. Bakeng sa molumo o tlasetage (mefuta ea LV) lihlahisoa, ho na le lisebelisoa tse peli tsa matla bakeng sa ho fokotsa mosebetsi; bakeng sa matla a phahamengtaglihlahisoa tsa e (HV model), ho na le motlakase o le mong feela. Sheba litaelo le setšoantšo se ka tlase mabapi le mokhoa oa ho hokahanya lithapo le sehokelo sa li-terminal block sehokelong sa receptor.

• MOHATO 1: Kenya lithapo tse Positive/Negative DC kapa Line/Neutral AC ho litheminale tsa V+/V- kapa L/N, ka ho latellana.
• MOHATO 2: Ho thibela lithapo tsa DC kapa tsa AC hore li se ke tsa thella, sebelisa screwdriver e nyane ea lehare ho tiisa terata.amp konopo e ka pele ho sehokelo sa block block.
• MOHATO 3: Kenya li-prong tsa sehokelo sa "terminal block" tsa polasetiki ka har'a seamoheli sa block block, se ka lehlakoreng le letona la lisebelisoa tsa EDS.

Ho thaepa Lisebelisoa tsa Dijithale
Sesebelisoa sa EDS se na le sete e le 'ngoe ea lisebelisoa tsa digital (DI). DI e na le likhokahano tse peli tsa sehokelo sa li-terminal block tsa 4-pin ka lehlakoreng le letona la EDS. Sheba litaelo le setšoantšo se ka tlase mabapi le mokhoa oa ho hokahanya lithapo le sehokelo sa li-terminal block sehokelong sa receptor.

• MOHATO 1: Kenya lithapo tse mpe (fatše)/positive DI ho litheminale tsa ┴/I, ka ho latellana.
• MOHATO 2: Ho thibela lithapo tsa DI hore li se ke tsa theoha, sebelisa screwdriver e nyane e nang le lehare ho tiisa wire-cl.amp konopo e ka pele ho sehokelo sa block block.
• MOHATO 3: Kenya li-prong tsa sehokelo sa "terminal block" tsa polasetiki ka har'a seamoheli sa block block, se ka lehlakoreng le letona la lisebelisoa tsa EDS.

Ho potoloha Module ea Matla
Mojule oa matla oa sesebelisoa sa EDS o ka fetoloa ho etsa hore ho be bonolo ho lumellana le ts'ebeliso ea sebaka sa hau sa tšimo.

• Mohato oa 1: Tlosa li-screws tse peli tse tiisang mojule oa matla ho sesebelisoa sa EDS ebe o tlosa module.
• Mohato oa 2: Fetolela mojule oa matla ho ea ka oache e le hore motlakase, kenyelletso ea dijithale, le likhokahano tse tsoang ho relay li ka isoa holimo.
• Mohato oa 3: Khutlisa mojule ho sesebelisoa sa EDS.
• Mohato oa 4: Tlamella li-screws tse peli ho module.

Likhokahano tsa Puisano

Sesebelisoa se seng le se seng sa EDS-G4012 Series se na le mefuta e fapaneng ea likou tsa puisano:

• RJ45 console port (RS-232 interface)
• Boema-kepe ba polokelo ea USB (sehokelo sa mofuta oa A, se koetsoeng hajoale)
• 10/100/1000BaseT(X) likou tsa Ethernet
• 10/100/1000BaseT(X) kapa 100/1000BaseSFP combo port
• 1000/2500BaseSFP slots
• sekotjana sa karete ea microSD (hajoale se holofetse)

Khokahano ea Port Port

Sesebelisoa sa EDS se na le kou e le 'ngoe ea li-console ea RJ45 (RS-232), e sebakeng se ka pele. Sebelisa RJ45-to-DB9 (sheba thapo e latelang litšoantšo tsa wiring) ho hokela koung ea khomphutha ea EDS boema-kepeng ba COM ea PC ea hau. U ka sebelisa lenaneo la "console terminal", joalo ka Moxa PCm Terminal Emulator, ho fihlella EDS e nang le sekhahla sa baud sa 115200.

RJ45 Console Port pinouts

Pin	Tlhaloso
1	DSR
2	RTS
3	-
4	TxD
5	RxD
6	GND
7	CTS
8	DTR

Khokahano ea USB

HLOKOMELA Ts'ebetso ea USB ha joale e bolokiloe 'me e ka hlokoa nakong e tlang. Hoa lokela ho hlokomeloa hore kou ena e ke ke ea sebelisoa bakeng sa ho tjhaja lisebelisoa leha e le life.

10/100/1000BaseT(X) Khokelo ea Boema-kepe ba Ethernet
Lintlha tsa 1000BaseT(X) li fetisoa ka lipara tse fapaneng tsa TRD+/- holim'a lithapo tsa koporo.

MDI Port Pinouts

Pin	Letshwao
1	Tx +
2	TX-
3	Rx +
6	Rx-

MDI-X Port Pinouts

Pin	Letshwao
1	Rx +
2	Rx-
3	Tx +
6	TX-

8-phini RJ45

RJ45 (8-pin) ho ea ho RJ45 (8-pin) E otlolohileng ka Cable WiringRJ45 (8-pin) ho ea ho RJ45 (8-pin) Cross-over Cable Wiring 1000BaseT(X) Khokelo ea Boema-kepe ba Ethernet
Lintlha tsa 1000BaseT(X) li fetisoa ka lipara tse fapaneng tsa TRD+/- holim'a lithapo tsa koporo.
MDI/MDI-X Port pinouts

Pin	Letshwao
1	TRD(0)+
2	TRD(0)-
3	TRD(1)+
4	TRD(2)+
5	TRD(2)-
6	TRD(1)-
7	TRD(3)+
8	TRD(3)-

100/1000BaseSFP (mini-GBIC) Fiber Port
Likou tsa li-fiber tsa Gigabit Ethernet ho switch ke 100/1000BaseSFP fiber ports, tse hlokang ho sebelisa 100M kapa 1G mini-GBIC fiber transceivers ho sebetsa hantle. Moxa e fana ka khetho e felletseng ea mefuta ea transceiver bakeng sa litlhoko tse fapaneng tsa sebaka.
Mohopolo o ka morao ho boema-kepe ba LC le thapo o hlakile. Ha re re u hokahanya lisebelisoa tsa I le II; khahlanong le matšoao a motlakase, matšoao a optical ha a hloke potoloho e le hore a fetise data. Ka lebaka leo, e 'ngoe ea mela ea optical e sebelisetsoa ho fetisetsa data ho tloha mochine oa I ho ea ho sesebelisoa sa II,' me mohala o mong oa optical o sebelisoa ho fetisetsa data ho tloha mochine oa II ho ea ho sesebelisoa sa I, bakeng sa phetisetso e feletseng ea duplex.
Hopola ho hokahanya boema-kepe ba Tx (ho fetisa) ea sesebelisoa sa I ho Rx
(fumana) boema-kepe ba sesebelisoa sa II, le boema-kepe ba Rx (amohela) ba sesebelisoa sa I ho ea boema-kepe ba Tx (phetiso) ea sesebelisoa sa II. Haeba u iketsetsa thapo, re fana ka maikutlo a hore u ngole mahlakore a mabeli a mola o le mong ka litlhaku tse tšoanang (A-to-A le B-to-B, joalokaha ho bontšitsoe ka tlase, kapa A1-to-A2 le B1-to-B2 ).

LC-Port pinoutsLC-Port ho ea LC-Port Cable Wiring TLHOKOMELO
Ena ke sehlahisoa sa Class 1 Laser/LED. Ho qoba ho baka tšenyo e tebileng mahlong a hau, u se ke ua sheba ka ho toba Beam ea Laser.

Seta Botjha Konopo

Konopo ea reset e ka etsa mesebetsi e 'meli. E 'ngoe ke ho seta bocha switch ea Ethernet ho li-setting tsa kamehla tsa feme ka ho tobetsa le ho ts'oara konopo ea reset nako e telele ho feta metsotsoana e mehlano. Sebelisa ntho e nchocho, joalo ka sekotwana sa pampiri se otlolohileng kapa toothpick, ho hatella konopo ea reset. Sena se tla etsa hore STATE LED e panye hang ka motsotsoana. Ka mor'a ho hatella konopo bakeng sa metsotsoana e 5 e tsoelang pele, STATE LED e tla qala ho panya ka makhetlo a 4 / sec. Sena se bontša hore litlhophiso tsa kamehla tsa feme li kentsoe 'me u ka lokolla konopo ea reset. Mosebetsi o mong ke ho qala sesebelisoa ka ho hatella konopo ea reset bakeng sa metsotsoana e mehlano.

Turbo Ring DIP Switch Settings

Lisebelisoa tsa EDS ke li-switches tsa Ethernet tse laoloang ke plug-and-play. Proprietary Turbo Ring protocol e ile ea hlahisoa ke Moxa ho fana ka ts'epo e ntle ea marang-rang le nako ea ho hlaphoheloa kapele. Nako ea ho hlaphoheloa ea Moxa Turbo Ring e ka tlase ho 50 ms (Turbo Ring V2) -ha e bapisoa le nako ea ho khutlisa metsotso e 3 ho isa ho e 5 bakeng sa li-switches tsa khoebo-ho fokotsa tahlehelo e ka bakoang ke ho hlōleha ha marang-rang sebakeng sa indasteri.
Ho na le Liphetoho tse hlano tsa Hardware DIP bakeng sa Turbo Ring karolong e ka tlaase ea mochine oa EDS e ka thusang ho hlophisa Turbo Ring habonolo ka mor'a metsotsoana. Haeba u sa batle ho sebelisa sesebelisoa sa DIP sa Hardware ho seta Ring ea Turbo, u ka sebelisa a web sebatli, telnet, kapa console ho tima tšebetso ena.
HLOKOMELA Ka kopo sheba karolo ea Turbo Ring ho Buka ea Mosebelisi bakeng sa lintlha tse ling mabapi le tlhophiso le ts'ebeliso ea Turbo Ring V2.

Turbo Ring DIP Switch Settings

Tlhophiso ea kamehla bakeng sa Switch ka 'ngoe ea DIP e TIMA. Tafole e latelang e hlalosa phello ea ho beha DIP Switjha ho boemo ba ON.
Tlosa sekoaelo sa rabara karolong e ka tlaase ea sesebelisoa ho pepesa li-switches tsa DIP.

DIP Switch Settings

KOTSA 1	KOTSA 2	KOTSA 3	KOTSA 4	KOTSA 5
	ON: E nolofalletsa ho	ON: E nolofalletsa	ON:	ON: E kenya tshebetsong
	default "Ring	EDS ena joalo ka	E nolofalletsa ho	DIP switjha 2,
	Ho kopanya	Ring	ya kamehla	3, le 4 ho
	(bekapo)” koung	Monghadi.	“Ring	lokisa
	ha DIP e fetoha		Ho kopanya”	Ring ea Turbo V2
E boloketsoe tšebeliso ea nako e tlang	4 e se e ntse e le teng nolofalitsoe.		boemakepe.	litlhophiso.
	TLOA: E nolofalletsa ho kamehla Ring	TLOA: Sena EDS e ke ke	TLOA: Sena EDS e ke ke	TLOA: DIP switjha 2, 3,
	Ho kopanya	e be Ring	e be Ring	mme 4 e tla ba
	(ea mantlha) koung	Monghadi.	Banyalani.	bokooa.
	ha DIP e fetoha
	4 e se e ntse e le teng
	nolofalitsoe.

HLOKOMELA O tlameha ho bulela Turbo Ring (DIP switjha 5) pele pele o sebedisa switjha ya DIP ho kenya tshebetsong tshebetso ya Master le Coupler.
HLOKOMELA Haeba u sa lumelle li-switches tsa EDS hore e be Ring Master, protocol ea Turbo Ring e tla ikhethela switch ea EDS e nang le lethathamo le lenyenyane la liaterese tsa MAC hore e be Ring Master. Haeba ka phoso o ka etsa hore switjha e fetang e le 'ngoe e be Ring Master, li-switches tsena li tla buisana ka bo eona ho fumana hore na ke ofe eo e tla ba Ring Master.

Lipontšo tsa LED

Karolo e ka pele ea Moxa EDS-G4012 Series e na le matšoao a 'maloa a LED. Mosebetsi oa LED ka 'ngoe o hlalosoa tafoleng e latelang:

Lisebelisoa tsa lisebelisoa tsa LED

LED	Mmala	Naha	Tlhaloso
TŠEBELETSO	Botala	On	Ha sistimi e se e fetile tlhahlobo ea matla a ho itlhahloba (POST) mme e se e loketse ho sebetsa.
		Ho panya (1 nako/mots.)	Tobetsa konopo ea ho seta botjha metsotsoana e mehlano ho qala fekthering litlhophiso tsa kamehla
		Ho panya (Makhetlo a 4 / set lao)	Ha o tobetsa konopo ea reset, hatelle metsotsoana e 5 ho khutlela fekthering ea kamehla.
		E tima	N/A
	Khubedu	On	Sistimi e hlolehile ho qala ts'ebetso ea ho qala • Tsamaiso Info. Bala O hlolehile kapa Phoso ea lintlha tsa EEPROM
PHOTO	Khubedu	On	1. Khokahano ea relay e hlahisitsoe 2. Moeli oa sekhahla sa ho kena o fetisitsoe mme kou e kene ka mokhoa oa ho koala 3. Khokelo e sa sebetseng ea Ring port
		E tima	Ha sistimi e qala mme e sebetsa ka nepo kapa ketsahalo e hlophisitsoeng ke mosebelisi ha e bakoe.
P1	Amber	On	Matla a fanoa ka matla kenya PWR.
		E tima	Matla ha a fanoe ho PWR ea motlakase.
P2	Amber	On	Matla a fanoa ka matla kenya PWR.
		E tima	Matla ha a fanoe ho PWR ea motlakase.
MSTR/ HLOOHO (M/H)	Botala	On	Ha switjha e le Master/Head/Root of Turbo Ring/Turbo Chain/Fast RSTP.
		Ho panya (Makhetlo a 4 / set lao)	1. Phetoho e fetohile Monghali oa Turbo Ring ka mor'a hore Turbo Ring e theohe 2. Sesebelisoa se behiloe e le Hlooho ea Turbo Chain le Turbo Chain e theohile 3. Phetoho e behiloe e le Setho sa Ring ea Turbo mme Ring port e tsamaellanang e theohile 4. Switjha e behilwe e le Setho/ Mohatla wa Turbo Chain le Hlooho e tsamaellanang le yona- end Chain port e theohile.
		E tima	Ha switjha ha se Monghali/Hlooho/Motso oa Ring ena ea Turbo/Turbo Chain/Fast RSTP.

LED	Mmala	Naha	Tlhaloso
CPLR/ MOELA	Botala	On	1. Ho kopanya lesale la switjha kapa ts'ebetso e 'meli ea homing e nolofalitsoe. 2. Switjha e behilwe e le Mohatla ea Turbo Chain.
		Ho panya (Makhetlo a 4 / set lao)	1. Phetoho e behiloe ha Mohatla oa Turbo Chain le Chain e theohile. 2. switjha e behiloe joalo ka Setho/ Hlooho ea Turbo Chain le Mohatla o tsamaellanang le ona- end Chain port e theohile.
		E tima	Ha sesebelisoa se tima karolo ea ho kopanya kapa mohatla oa Turbo Chain.
Tsamaiso LED (Ntle PWR)	Botala + Amber + Bokhubelu	Ho panya (Makhetlo a 2 / set lao)	Sesebelisoa se ntse se sibolloa / se fumaneha ke ts'ebetso ea sebaka.
Tsamaiso LED (Ntle PWR)	Botala + Amber + Bokhubelu	Fetola -> Koala Ka tatellano	Phetoho ke ho kenya / ho romela thepa a file ka ABC-02-USB kapa karete ea SD. (hajoale e holofetse)

Lipontšo tsa Smart PoE LED

LED	Mmala	Naha	Tlhaloso
Smart PoE + LED Lipontšo	Botala	On	Ha boema-kepe bo hoketsoe ho sesebelisoa sa IEEE 802.3bt 'me se tsamaisoa ho: • Mosaeno o le mong (PD) Sehlopha sa 5 ho isa ho sa 8 • Sehlopha sa pele sa ho saena (PD) ho ea ho 5
		E tima	1. Ha matla a sa fanoe ho sesebelisoa se tsamaisoang (PD) 2. Boema-kepe ha boa hokela ho sesebelisoa se tsamaisoang ke IEEE 802.3bt
	Amber	On	Ha boema-kepe bo hoketsoe ho IEEE 802.3af/at sesebelisoa se tsamaisoang 'me se tsamaisoa ho: • Mosaeno o le mong (PD) 0 ho isa ho 4
		Ho panya (Makhetlo a 4 / set lao)	Phepelo ea motlakase ea PoE e koetsoe ka lebaka la tekanyetso e tlase ea matla.
		E tima	1. Matla ha a fanoe ho sesebelisoa se tsamaisoang (PD) 2. Boema-kepe ha boa hokela ho IEEE 802.3af/at standard PD

LED	Mmala	Naha	Tlhaloso
	Khubedu	On	Ho hloleha ho lemoha sesebelisoa se matla (PD).
		Ho panya (Makhetlo a 4 / set lao)	Overcurrent kapa short circuit has e etsahetse ho Sesebelisoa se tsamaisoang (PD)
		E tima	PoE e sebetsa ka mokhoa o tloaelehileng

Lipontšo tsa li-Ports LED

LED	Mmala	Naha	Tlhaloso
10M / 100M / 1000M Copper top LED	Botala	On	Ha boema-kepe bo sebetsa 'me bo hokela ho 1000Mbps.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e ba teng e tsamaisoa ho 1000Mbps.
		E tima	Ha boema-kepe bo sa sebetse kapa sehokelo fatshe.
10M / 100M / 1000M LED e tlase ea koporo	Amber	On	Ha boema-kepe bo sebetsa 'me bo hokela ho 10/100Mbps.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e ba teng e fetisoa ho 10/100Mbps.
		E tima	Ha boema-kepe bo sa sebetse kapa hokela tlase.
100M / 1000M (SFP kou)	Botala	On	Ha boemakepe bo sebetsa le lihokelo ho 1000Mbps.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e fetisoa ho 1000Mbps.
		E tima	Ha boema-kepe bo sa sebetse kapa sehokelo fatshe.
	Amber	On	Ha boemakepe bo sebetsa le lihokelo ho 100Mbps.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e fetisoa ho 100Mbps.
		E tima	Ha boema-kepe bo sa sebetse kapa hokela tlase.
1000M / 2500M (SFP kou)	Botala	On	Ha boemakepe bo sebetsa le lihokelo ho 2500Mbps.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e fetisoa ho 2500Mbps.
		E tima	Ha boema-kepe bo sa sebetse kapa sehokelo fatshe.
	Amber	On	Ha boemakepe bo sebetsa le lihokelo ho 1000M.
		Ho panya (Makhetlo a 4 / set lao)	Ha data ea boema-kepe e ntse e ba teng e fetisoa ho 1000M.
		E tima	Ha boema-kepe bo sa sebetse kapa hokela tlase.

Litlhaloso

Sehokedi
RJ45 Boema-kepe	10/100/1000BaseT(X)
Likepe tsa Fiber	EDS-G4012-4GC: 100/1000BaseSFP EDS-G4012-8P-4QGS: 1000/2500BaseSFP
Kou ea Console	RS-232 (RJ45)

Konopo	Seta botjha konopo
Lipontšo tsa LED	SEBAKA (LI-), MPHOTO (F), PWR1 (P1), PWR2 (P2), MSTR/HLOOHO (M/H), CPLR/MOHATLA (C/T), SYNC
Lebitso la Alamo	1 hangata e bula tlhahiso ea relay ea motlakase ka matla a hona joale a 1 A @ 24 VDC
Input ea dijithale	Kenyelletso e le 'ngoe ea dijithale e ikhethileng: +13 ho ea ho +30V bakeng sa boemo "1" -30 ho +3V bakeng sa boemo "0" Max. hona joale ho kenya: 8 mA
Poe
Kakaretso ea Budget ea Matla	Power Bypass (-LVA model): 240 W @ 48 VDC e kenyang matla Power Boost (-LVB model): 62 W @ 12 VDC, 150 W @ 24 VDC (120 W for -T model), 180 W @ 48 VDC
PoE Output Voltage	55 VDC
PoE Output Power	15.4 W bakeng sa maemo a 802.3af, 30 W bakeng sa 802.3at e tloaelehileng, 36 W ka mokhoa o phahameng oa matla, 60 W ho 802.3bt e tloaelehileng.
PoE Output Current	350 mA bakeng sa maemo a 802.3af, 600 mA bakeng sa maemo a 802.3, 1960 mA bakeng sa maemo a 802.3bt
Ho Tlameha Hona Joale Tšireletso Koung	Hlahisa
PoE Pinout	Mokhoa oa A: Para 1,2 (V +); Para 3,6 (V-) Mokhoa oa B: para 4,5 (V +); para 7,8 (V-)
Matla
Module ea Matla e kentsoeng esale pele	-LV/-LV-T mehlala: PWR-100–LV -HV/-HV-T mefuta: PWR-105-HV-I -LVA/-LVA-T mehlala: PWR-101-LV-BP-I -LVB/-LVB-T mehlala: PWR-103-LV-VB-I
Hlokomela	Letoto la EDS-G4012 le ts'ehetsa phepelo ea motlakase ea modular. Mabitso a mohlala le li-parameter tsa matla li khethoa ke module ea matla e kentsoeng. Bakeng sa mohlalaampLe: EDS-G4012-T + PWR-100-LV = EDS-G4012-LV-T EDS-G4012-T + PWR-105-HV-I = EDS-G4012-HV- T Haeba u kenya mochine o fapaneng oa matla, sheba litlhaloso tsa mohlala o lumellanang. Bakeng sa mohlalaample, haeba u nkela sebaka sa motlakase oa EDS-G4012-LV-T sebaka ka PWR-105-HV-I, bua ka lintlha tse qaqileng tsa EDS-G4012-HV-T.
E lekantsoe Voltage	Mefuta ea -LV/-LV-T: 12/24/48 VDC, lisebelisoa tse peli tse sa hlokahaleng -HV/-HV-T mehlala: 110/220 VDC/VAC, kenyeletso e le 'ngoe Mefuta ea -LVA/-LVA-T: 48 VDC, lisebelisoa tse peli tse sa hlokahaleng -LVB/-LVB-T mehlala: 12/24/48 VDC, e sa hlokahaleng tse kenang habeli

Tshebetso Voltage	-LV/-LV-T mehlala: 9.6 ho 60 VDC -HV/-HV-T mefuta: 88 ho 300 VDC, 85 ho 264 VAC -LVA/-LVA-T mehlala: 44 ho 57 VDC (> 52 VDC bakeng sa tlhahiso ea PoE + e khothalelitsoeng) -LVB/-LVB-T mehlala: 12 ho 57 VDC (> 52 VDC bakeng sa Tlhahiso ea PoE+ e khothalelitsoe)
E lekantsoe Hona Joale	-LV/-LV-T mehlala: 12-48 VDC, 1.50-0.40 A kapa 24 VDC, 0.70 A -HV/-HV-T mefuta: 110-220 VAC, 50-60 Hz, 0.30- 0.20 A kapa 110-220 VDC, 0.30-0.20 A -LVA/-LVA-T mehlala: 48 VDC, 5.42 A -LVB/-LVB-T mehlala: 12/48 VDC, 7.46/4.27 A kapa 24 VDC, 7.26 A
Tšebeliso ea Matla	Mefuta ea EDS-G4012-4GC-LV(-T): 12.68 W EDS-G4012-4GC-HV(-T) mehlala: 15.8 W EDS-G4012-8P-4QGS-LVA(-T) mehlala: Ntle le PoE: 15.58 W Ka PoE: Max. 240 W bakeng sa kakaretso ea tšebeliso ea matla a PD @ 48 VDC input Mefuta ea EDS-G4012-8P-4QGS-LVB(-T) Ntle le PoE: 17.96 W Ka PoE: Max. 180 W bakeng sa kakaretso ea tšebeliso ea matla a PD @ 48 VDC input; Max. 150 W bakeng sa kakaretso ea tšebeliso ea matla a PD @ 24 VDC input; Max. 62 W bakeng sa kakaretso ea tšebeliso ea matla a PD @ 12 VDC input
Inrush Current	Max. 0.8 A @ 48 VDC (0.1 – 1 ms) (E sebetsa ho mefuta ea -LV)
Ho Tlameha Hona Joale Tšireletso ho Kenyeletso	Hlahisa
Khutlela Polarity Tshireletso	Hlahisa
Khokahano	Li-terminals tse 2 tse ka tlosoang tse 4
Litšobotsi Tsa 'Mele
Matlo	Tšireletso ea tšepe, IP40
Boemo	55 x 140 x 122.5 mm (2.17 x 5.51 x 4.82 in)
Boima ba 'mele	Mefuta ea EDS-G4012-4GC (-T): 881.5 g (1.94 lb) Mefuta ea EDS-G4012-8P-4QGS (-T): 972 g (2.14 lb)
Ho kenya	Ho hlomamisoa ka DIN-rail, ho kenya lebota (ka khiti ea boikhethelo)
Meeli ea Tikoloho
Mocheso oa ho sebetsa	-10 ho 60 ° C (14 ho 140 ° F) bakeng sa mehlala e tloaelehileng -40 ho 75 ° C (-40 ho 167 ° F) bakeng sa mefuta ea -T
Mocheso oa polokelo	-40 ho isa ho 85°C (-40 ho isa ho 185°F)
Leloko la Ambient Mongobo	5 ho isa ho 95% (ha e fokotsehe)
Bophahamo	Ho fihlela ho 2000 m Tlhokomeliso: Ka kopo ikopanye le Moxa haeba u hloka lihlahisoa tse tiisitsoeng hore li tla sebetsa hantle sebakeng se phahameng.
Litumello tsa Taolo
Ts'ireletso ea indasteri	IEC 62443-4-1, IEC 62443-4-2
Polokeho	UL 61010-2-201, EN 62368-1(LVD)

EMC	EN 55022/24, EN 61000-6-2/6-4
EMI	FCC Karolo ea 15 Karolo ea B Sehlopha sa A
EMS	EN 61000-4-2 (ESD) Mohato 4 EN 61000-4-3 (RS) Mohato 3 EN 61000-4-4 (EFT) Mohato 4 EN 61000-4-5 (Surge) Mohato 4 EN 61000-4-6 (CS) Mohato 3 EN 61000-4-8 Mohato oa 4
Ho tshoha	Tlhaloso: IEC 60068-2-27
Hoetla mahala	Tlhaloso: IEC 60068-2-32
Ho thothomela	Tlhaloso: IEC 60068-2-6
Sephethephethe sa Terene (Tselang)	EN 50121-4
Taolo ea Sephethephethe	NEMA TS2
Tiisetso
Tiisetso	5 lilemo

TLHOKOMELO
Sesebelisoa sena se lumellana le Karolo ea 15 ea melao ea FCC. Ts'ebetso e ipapisitse le maemo a latelang:

1. Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi.
2. Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.

Litokomane / Lisebelisoa

	MOXA EDS-4012 Series EtherDevice Switch [pdf] Tlhophiso Tataiso Letoto la EDS-4012, EtherDevice Switch
	MOXA EDS-4012 Series EtherDevice Switch [pdf] Tlhophiso Tataiso EDS-4012 Series, EtherDevice Switch, EDS-4012 Series EtherDevice Switch, Switch
	MOXA EDS-4012 Series EtherDevice Switch [pdf] Tlhophiso Tataiso EDS-4012 Series EtherDevice Switch, EDS-4012 Series, EtherDevice Switch, Switch

Litšupiso

• Bukana ea Mosebelisi