moa SB02 Sensor Bin Instruction Manual

moa-SB02-Sensor-Bin-FEACHERD
moa-LOGO

Moa SB02 Sensor Bin

moa-SB02-Sensor-Bin-PRODUCT

Tlhahisoleseding ya Sehlahiswa

Sensor Bin SB02 ke moqomo oa litšila o ikemetseng, o sa amang o etselitsoe tšebeliso ea lelapa. E sebetsa ho li-betri tsa AA tsa 4-6 tsa alkaline 'me e na le skrine ea ho ama, mokhoa oa ho induction ka ho iketsa, mokhoa oa ho koala oa ho lieha, le mokhoa o bulehileng oa matsoho. Sekoaelo se bula ka bohona ka har'a sebaka sa 10-25cm ho tloha skrineng sa ho ama 'me se koala ka mor'a ho bala metsotsoana e 5. Sehlahisoa se na le bophelo ba betri ba likhoeli tse ka bang 4 ha se sebelisoa makhetlo a 30 ka letsatsi 'me se fana ka tšireletso ho thibela kotsi kapa tšenyo.

Litaelo tsa Tšebeliso

  1. Pele o sebelisa sehlahisoa, bala bukana ea litaelo ka hloko.
  2. Hokela sesebelisoa ho sokete ea lebota e entsoeng ka letsopa.
  3. Kenya libeteri tsa 4-6 tsa alkaline AA, u ele hloko polarity.
  4. Tlosa sekwahelo le reng e ka hare ea moqomo.
  5. Kenya mokotla oa lithōle 'meleng, ho etsa bonnete ba hore molomo oa mokotla o pota-potile lesale la ka ntle.
  6. Beha selikalikoe sa ka hare holim'a mokotla ebe o khutlisetsa molomo oa mokotla 'meleng.
  7. Tobetsa konopo ea ON ebe u beha sekoahelo 'meleng.
  8. Sehlahisoa se tla sebetsa ka mokhoa oa auto induction, se bula ka bohona kahare ho 10-25cm ho tloha skrineng sa ho ama. Sekoahelo se tla lula se butsoe ha se le ka har'a sebaka 'me se tla koala ka bohona ka mor'a ho bala metsotsoana e 5 hang ha u tloha sebakeng seo.
  9. Ka mokhoa o butsoeng ka letsoho, tobetsa konopo ea OPEN hanyenyane ho bula sekoahelo. Ho koala ka letsoho, tobetsa konopo ea CLOSE hanyenyane. Haeba se sa angoa, sekoahelo se tla koala ka bohona ka mor'a metsotsoana e 120 ka mokhoa o bulehileng oa matsoho.
  10. Haeba sehlahisoa se sa sebetse hantle, sheba bukana ea litaelo bakeng sa tharollo kapa ikopanye le morekisi oa lehae.

PELE SEBELISA

Pele o sebelisoa, ka kopo bala bukana ena ka hloko.
Hokela sesebelisoa feela ho sokete e entsoeng ka letsopa.
Sesebelisoa sena ke sa ts'ebeliso ea lapeng feela. Ha u sebelisa lisebelisoa tsa motlakase, mehato ea ts'ireletso ea mantlha e lokela ho lateloa ka linako tsohle ho qoba mollo, ho tsosoa ke motlakase, ho cha, kapa likotsi tse ling le tšenyo. Bala litaelo tsena tsa ts'ebetso le polokeho ka hloko

BOHLOKOA MATS'ELI

  1. Ka kopo ela hloko polarity ha u kenya libeteri.
  2. Beha sehlahisoa sebakeng se omeletseng sa ka tlung. Se ke oa e sebelisa sebakeng sa mocheso o phahameng (ho feta 45°C) kapa tikolohong e mongobo.
  3. Ho sireletsa koloi hantle, ka kopo u se ke ua koala kapa ua bula sekoahelo ka ho toba ka matla a mang. Sekoahelo se tla koaloa ka boomo ka mor'a metsotsoana e 5.
  4. Sehlahisoa sena se nka 4 ~ 6pcs ea libeteri tsa alkaline AA tse ka sebelisoang likhoeli tse 4 maemong a nepahetseng (ena ke lintlha tsa tlhahlobo ea makhetlo a 30 ho bula le ho koala letsatsi ka laboratoring, e tla fapana le maemo a sebetsang ka lebaka la maemo le tikoloho e fapaneng. .
  5. Haeba libeteri li fela kapa li tlohetsoe nako e telele li sa sebelisoe, li ntše kapa u kenye tse ncha ka nako ho thibela ho tsoa kapa ho lutla.
  6. Ka kopo boloka sehlahisoa se le hole le mocheso, leseli le thata le moea ho qoba phoso ea ho bula ka bohona.
  7. Ka kopo u se ke ua nkela likarolo tse sa lumelloeng sebaka kapa ua li lokisa u le mong.

LIKAROLO LE SEBAKA moa-SB02-Sensor-Bin-FIG-1

  1. Lid1. Sekoahelo
  2. Skrine se thetsoang
  3. Lesale la ka hare
  4. selikalikoe sa kantle
  5. 'Mele
  6. Qetella/Tlosa
  7. Likamore tsa betri
  8. Sekoaelo sa betri
  9. Mokotla oa betri

LITAELO TSA SEHLAHLISO

  1. Tlosa sekwahelo le reng e ka hare.
  2. Kenya mokotla oa lithōle 'meleng' me u etse hore mokotla molomong o pota-potile selikalikoe sa ka ntle.
  3. Kenya selikalikoe se ka hare 'me u khutlisetse molomo oa mokotla 'meleng.
  4. Tobetsa konopo "-" ebe u beha sekoahelo 'meleng.

HO SEBETSA MODE

Mokhoa oa ho kenya otho:

  • Sekoahelo se tla buleha ka bohona ha u kena ka har'a sebaka sa 10 ~ 25 cm ka pel'a skrine ea ho ama, Haeba e ka tlase ho 10cm, e ke ke ea utloa.
  • Ho lieha ho koala mokhoa: Ha sensor ea koloi e buletsoe, sebakeng sa induction, sekoaelo se tla lula se butsoe. Ka mor'a hore motho kapa ntho e tsamaee, sekoahelo se tla koala ka mor'a metsotsoana e 5 ho theoha.
  • Mokhoa oa ho bula ka letsoho: Tobetsa konopo ea BULA hanyenyane, sekwahelo se buleha hang-hang 'me se lule se butsoe. Ho koala ka letsoho, tobetsa konopo ea CLOSE hanyenyane, mochini oa sensor o tla khutlela mokhoeng oa autoinduction. Haeba e sa ama konopo ea CLOSE, sekwahelo se tla koala ka bohona ka mor'a 120s ka mokhoa o bulehileng oa matsoho.moa-SB02-Sensor-Bin-FIG-2

LITŠOANTŠISO LE THAROLLO

Ho se sebetse hantle: Sekoahelo se hloleha ho bula Tharollo:

  • Sheba hore na libeteri li kentsoe hantle kapa haeba libeteri li kopane hantle le liliba.
  • Sheba hore na switch e buletsoe.
  • Tloha sebakeng sa inductive metsotsoana e 10 ebe u leka hape.

Ho se sebetse hantle: Sekoahelo se hloleha ho koala Litharollo:

  • Sheba hore na ho na le tšitiso sebakeng sa inductive.
  • Potoloho e ka ba damp.Tima switch ebe o beha sekwahelo sebakeng se nang le moea o kenang ho fihlela se omme ebe o leka hape.

Ho se sebetse hantle: Sekoahelo se buleha butle haholo Tharollo:

  • Libetri li ntse li fokola, pls nka tse ncha.
  • Maikutlo: Haeba litharollo tse ka holimo li sa sebetse, ka kopo ikopanye le setsi sa thekiso ea lehae
TLHOKOMELO
  • U se ke ua lahla sesebelisoa ka litšila tse tloaelehileng tsa malapeng.
  • Lahla sesebelisoa femeng e ngolisitsoeng ea ho lahlela lithōle kapa ka sebaka sa hau sa sechaba sa ho lahla litšila.
  • Ela hloko melao ea hajoale e sebetsang. Haeba ho na le pelaelo, sheba setsi sa hau sa ho lahla litšila.

TIISETSO

Moreki ea Ratehang,

  • Ke leboha haholo ka ho rekaasing sehlahisoa sa MOA.
  • Re lakatsa ho u tsebisa hore sehlahisoa sena se koahetsoe ke tiisetso e lumellanang le lipehelo tsohle tsa molao mabapi le tiisetso le litokelo tsa bareki naheng eo sehlahisoa se rekiloeng ho sona.
  • Ha o ka fumana sekodi kapa ho se sebetse hantle ha sehlahiswa sa hao sa MOA, ka kopo ikopanye le Setsi sa Tlhokomelo ya Bareki se loketseng.
  • Na oa tsena,
  • Sehlopha sa MOA
  • www.mogolmedia.com

Litokomane / Lisebelisoa

PDF thumbnailSB02 Sensor Bin
Instruction Manual · SB02 Sensor Bin, SB02, Sensor Bin, Bin

Litšupiso

Published: April 30, 2023

Lipotso le likarabo

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Answered questions

Why does my Moa SB02 sensor bin lid only open and close when I touch the sensor instead of using the automatic motion detection?

It sounds like your bin might be stuck in Manual open mode or there is an issue with the induction range. Here are the steps to resolve this based on the manual:Check the Induction...

Read full answer

Lipotso le Likarabo

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Geachte heer/mevrouw,
    Ik heb een Moa prullenbak gekocht. Na installeren gaat het deksel alleen open, als ik de sensor aanraak. Idem het sluiten. Graag uw advies.

    M.v.g. Rob Tedja

    Rob Tedja asks Geachte heer/mevrouw,
    Ik heb een Moa prullenbak gekocht. Na installeren gaat het deksel alleen open, als ik de sensor aanraak. Idem het sluiten. Graag uw advies.

    M.v.g. Rob Tedja

    Manuals+ clarified question
    Potso

    Why does my Moa SB02 sensor bin lid only open and close when I touch the sensor instead of using the automatic motion detection?

    Araba

    It sounds like your bin might be stuck in Manual open mode or there is an issue with the induction range. Here are the steps to resolve this based on the manual:

    • Check the Induction Range: The automatic sensor is designed to detect motion within a range of 10 ho isa ho 25 cm in front of the touch screen. If you are closer than 10 cm, the sensor may not detect you.
    • Khutlisa Sensor: Turn the power switch (located on the back of the lid unit) to the TLOA position. Leave the inductive area for at least 10 seconds, then turn the switch back to the ON ("-") position to reset the electronics.
    • Manual vs. Auto Mode: If you touch the "OPEN" button, the bin enters manual mode and stays open for 120 seconds or until you touch "CLOSE". To return to Auto induction mode, ensure the lid is closed and you are approaching the sensor from the correct distance (10-25 cm) without touching the buttons.
    • Hlahloba Tšitiso: Ensure there is no dirt or objects blocking the sensor area, and that the bin is not placed under direct bright light or in a very windy spot, as these can interfere with the infrared sensor.
    • Hlahloba Betri: If the batteries are low, the sensor performance may degrade. Ensure you are using 4 to 6 high-quality alkaline AA batteries and that they are installed with the correct polarity.

    If the lid still only reacts to touch after these steps, the circuit may be damp. The manual suggests turning off the switch and placing the lid in a well-ventilated area to dry before trying again.

    Read the full Q&A page

    Araba

Botsa Potso

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.

Buka ea Tataiso ea Moetsi oa Sandwich ea MOA SM01B
La 4 Hlakubele 2024
moa EK2B Electric Kettle Instruction Manual
La 27 Tšitoe 2023
moa FP02B Bukana ea Tataiso ea Mochine oa Lijo
La 23 Tšitoe 2023
moa B2LlD2GZMQ4X Buka ea Tataiso ea Retro Toaster
La 13 Tšitoe 2023