Mircom MIX-M502MAP Interface module
Litlhaloso
- Tloaelehileng Operating Voltage: 15 ho 32 VDC
- Alamo e kholo ea Hona Joale: 5.1mA (LED e bonesitsoe)
- Kakaretso ea Ts'ebetso ea Hona Joale: 400μA, puisano e le 1 le flash ea LED e le 1 metsotsoana e meng le e meng e 5, 3.9k eol
- EOL Khanyetso: 3.9K Ohms
- Boholo ba ho hanyetsa lithapo tsa IDC: 25 ohm
- IDC Supply Voltage (pakeng tsa Terminals T3 le T4)
- E laoloang DC Moqtage: 24 VDC e na le matla a fokolang
- Ripple Moqtage: 0.1 Volts RMS boholo
- Hona joale: 90mA mojule ka 'ngoe
- Boemo ba Mocheso: 32˚F ho isa 120˚F (0˚C ho isa 49˚C)
- Mongobo: 10% ho isa ho 93% Ha e kolekese
- Boholo: 41⁄2˝ H x 4˝ W x 11⁄4˝ D (E nyolohela lisekoereng tse 4˝ ka lebokose le tebileng la 21⁄8˝.)
- Lisebelisoa: Lebokose la Motlakase la SMB500
Pele o kenya
Tlhahisoleseding ena e kenyelelitsoe e le tataiso e potlakileng ea ho kenya litšupiso. Sheba bukana ea ho kenya liphanele tsa taolo bakeng sa tlhaiso-leseling e batsi ea sistimi. Haeba li-module li tla kenngoa tsamaisong e teng ea ts'ebetso, tsebisa mookameli le ba boholong sebakeng seo hore tsamaiso e tla be e sa sebetse ka nakoana. Tlosa matla ho phanele ea taolo pele u kenya li-module.
TSEBISO: Bukana ena e lokela ho sieloa mong'a thepa ena.
Tlhaloso e Akaretsang
MIX-M502MAP Interface Module e reretsoe ho sebelisoa litsing tse bohlale, tse nang le terata tse peli, moo aterese ea motho ka mong ea mojule ka 'ngoe e khethoang ho sebelisoa li-switches tsa rotary tse hahiloeng ka har'a lilemo tse leshome. Mojule ona o lumella liphanele tse bohlale ho hokahanya le ho beha leihlo li-detectors tse tloaelehileng tsa mosi tse nang le terata tse peli. E fetisetsa boemo (bo tloaelehileng, bo bulehileng, kapa alamo) ea sebaka se le seng sa li-detectors tse tloaelehileng ho khutlela phanele ea taolo. Lisebelisoa tsohle tse nang le lithapo tse peli tse behiloeng leihlo li tlameha ho lumellana le mojule ona (sheba systemsensor.com bakeng sa lenane le felletseng). MIX-M502MAP e na le sesupo sa LED se laoloang ke phanele.
Litlhoko tsa ho lumellana
Ho netefatsa ts'ebetso e nepahetseng, li-module tsena li tla hokahanngoa le liphanele tsa taolo ea sistimi e lumellanang feela.
Ho phahamisa
MIX-M502MAP e hloella ka kotloloho mabokoseng a motlakase a lisekoere tse 4˝ (sheba Setšoantšo sa 2A). Lebokose le tlameha ho ba le botebo ba bonyane ba 21⁄8˝. Mabokose a motlakase a kentsoeng holim'a sefahleho (SMB500) a fumaneha ho tsoa ho Sys-tem Sensor.
Wiring
HLOKOMELA: Lithapo tsohle li tlameha ho tsamaellana le likhoutu tse sebetsang tsa lehae, melao-motheo le melaoana. Mojule ona o reretsoe ho sebelisa lithapo tsa motlakase tse lekantsoeng feela.
- Kenya li-wiring tsa module ho latela litšoantšo tsa mosebetsi le lithapo tse nepahetseng tsa lithapo.
- Beha aterese ho mojule ho latela litšoantšo tsa mosebetsi.
- Mojule o sireletsehileng oa lebokose la motlakase (o fanoeng ke sehlomathi), joalo ka ha ho bonts'itsoe ho Setšoantšo sa 2A.
Li-Sensor Smoke Detector tse tsamaellanang tsa terata tse peli tse tla sebelisoa ka MIX-M502MAP e nang le Zone Identifier A.
| Mohlala oa Mohloli | ID e lumellanang | Mofuta oa detector | Mohlala oa Motheo | Sekhetho sa Motheo | Li-detectors tse phahameng |
| 1451 | A | Ionization | B401/B | A | 20 |
| 2451 | A | Motlakase oa lifoto | B401/B | A | 20 |
| 2451TH | A | Photoelectric e nang le Thermal | B401/B | A | 20 |
| 1400 | A | Ionization | N/A | — | 20 |
| 2400 | A | Motlakase oa lifoto | N/A | — | 20 |
| 2400TH | A | Photoelectric e nang le Thermal | N/A | — | 20 |
| 1151 | A | Ionization | B110LP/B401 | A | 20 |
| 2151 | A | Motlakase oa lifoto | B110LP/B401 | A | 20 |
Setšoantšo sa 3. Lisebelisoa tse tloaelehileng tsa terata tse peli, NFPA Style B:
Setšoantšo sa 4. Lisebelisoa tse tloaelehileng tsa terata tse peli, NFPA Style D:
Setšoantšo sa 5. Mojule oa taolo ea phepelo o sebelisetsoang ho hakolla phepelo ea motlakase:
Litokomane / Lisebelisoa
 |
Mircom MIX-M502MAP Interface module [pdf] Buka ea Taelo MIX-M502MAP Interface Module, MIX-M502MAP, Interface Module, Mojule |
