MEAN WELL VFD-350C-230 AC Input Variable Frequency Drive Module le Mosebetsi oa PFC
Hlakola khoutu bakeng sa buka ea matsoho le ea video:
Likaroloana
- Kenyelletso ea 90 ~ 264Vac, e hahelletsoeng ka PFC ho 380VDC
- Matla stage, li-switch tsa 3-phase tse nang le li-sensor ka yuniti e le 'ngoe bakeng sa taolo ea kantle (boto ea taolo ea VFD-CB e rekisoa ka bongata)
- Tlhōrō e phahameng ea hona joale ho fihlela ho 200% le metsotsoana e 5
- Moralo o senang fan bakeng sa ts'ebetso e khutsitseng le bophelo bo bolelele
- Tšireletso: Short circuit / OCP
- Li-sensor tsa ka hare li fepa bakeng sa taolo: Sensor ea hajoale - taolo ea torque ea enjene
- DC bese voltagsensor - OVP / UVP
- Sensor ea mocheso - OTP
- -30 ~ + 60 ° C bophara ba mocheso oa ho sebetsa
- E loketse ho khanna koloi ea mekhahlelo e 3 (mohlala, BLDC, koloi ea Induction, SynRM)
- Waranti ea lilemo tse 3
Lisebelisoa
- HVAC
- Fane
- Pompo ea metsi/Moea
- Lisebelisoa tsa matla
- Conveyor
- Monyako o itekanetseng
- Lisebelisoa tsa boikoetliso
GTIN KHOUTU
- MW Search: https://www.meanwell.com/serviceGTIN.aspx
Tlhaloso
VFD-350C-230 ke mochine oa motlakase oa motlakase o feto-fetohang o fanang ka matla a kopantsoeng.tage, bakhanni ba liheke le li-sensor tsa VFD tsa mantlha tse kang li-sensors tsa hona joale tsa mekhahlelo e meraro le mocheso. Sehlahisoa sena se ka kengoa ts'ebetsong bakeng sa tharollo ea li-motor drive tse tharo ka ho hokahana le molaoli oa kantle oa koloi maemong a logic le analog 1/0. Matla stagKenyeletso ea e ke karolo e le 'ngoe e felletseng ho tloha ho 90VAC ho isa ho 264VAC e nang le ts'ebetso ea PFC. Phallo ea motlakase ea mekhahlelo e 3 e fihla ho 240V ka 200% ea tlhōrō ea bokhoni ba hona joale. VFD-350C-230 e loketse ho khanna koloi ea mekhahlelo e meraro, joalo ka BLDC, motor Induction motor, le SynRM applications.
Moetso oa khouto ea mohlala
LIEKETSENG TS'OANELO
| MOLELE NTS'E. | VFD-350C-230 | ||||
|
PWM SEHLOOHO (Tlhaloso ea 1,2,3,4) |
TLHOKOMELOTAGE RANGE(UVW) | 380Vmax, molumo oa mohala ho ea molengtage 0 ~ 268V e ka fetolehang ka PWM e fetotsoeng, e loketseng 3PH 200-240V enjene ea sehlopha | |||
| KHABANE | E lekantsoe | 1.4A | |||
| Tlhōrō | 2.8A bakeng sa metsotsoana e 5 | ||||
| REKETSO MATLA | 350W | ||||
| KHOTHAMO | 93% | ||||
| DC BESE MOLULATAGE | 380 ± 5VDC | ||||
| PWM MOEKETSI | 2.5KHz ~ 15KHz | ||||
|
KEKETSO |
RELEBOHILE KENYA MOLELETAGE | 90 ~ 264VAC | |||
| INPUT FREQUENCY RANGE (Hz) | 47 ~ 63Hz | ||||
| SEBETSO SA MATLA (Typ.) | PF>0.99/115VAC, PF>0.93/230VAC e tletse | ||||
| REKETSO KHOLO | 3.5A /115VAC 2A/230VAC | ||||
| TLHOKOMELLO CHELE | Ho bata ho qala 70A /230VAC | ||||
| LEAKAGE NKHOANE | <2mA/240VAC | ||||
|
TAOLO/ MOSEBETSI
(Tlhaloso ea 5) |
3-MOHATO PWM TAOO | Letšoao la taolo la PWM ho mokhanni oa heke bakeng sa li-IGBT. (CN93, PIN8~13)
3.3V TTL/CMOS input: High(>2.7V): IGBT ON ; Tlase(<0.4V): IGBT OFF |
|||
| 3-MOHATO KHABANE TŠEBELETSO | Lihanyetsi tse hahelletsoeng ka 100mΩ tse tlase lehlakoreng la shunt mohatong oa UVW (CN93, PIN4~6) | ||||
| DC BESE MOLULATAGE TS'ELISO | DC BUS voltagtlhahiso ea sensor ea e (CN93, PIN1) 2.5V@DC BUS 380V | ||||
| MOEKETSI WA SEBOKO | E hahelletsoeng ka 10KΩ NTC bakeng sa ho utloa mocheso o sebetsang oa IGBT. (TSM2A103F34D1R (Thinking Electronic), PIN3 ea CN93) | ||||
| POTSO POTSO | Letšoao la phoso la inverter(Short circuit/OCP, CN93, PIN7).
3.3V TTL / CMOS tlhahiso: Tloaelehileng: Phahameng (> 3V); E sa tloaelehang: Tlase(<0.5V) |
||||
| MOTLATSI MATLA | Matla a tsoang ho 15V a sa ikhethileng bakeng sa boto ea taolo ea kantle (CN93, PIN 14 ho isa PIN2) 15V@0.1A ; Mamello +/- 0.5V, Ripple 1Vp-p max | ||||
| TS'IRELETSO | POTOLOHO E KHUTSOANE | Mofuta oa ts'ireletso : Koala o/p voltage, matlafatsa hape ho fola | |||
|
TIKOLOHO |
MOSEBETSI TEMPELA. | -30 ~ +60℃ (Sheba "Dreating Curve") | |||
| MOSEBETSI MOKOBELO | 20 ~ 90% RH e sa lumellaneng | ||||
| POLOKO TEMP., MONATE | -40 ~ +85 ℃, 10 ~ 95% RH e sa tsitsang | ||||
| TSIETSO | 10 ~ 500Hz, 2G 10min./1cycle, nako ea 60min. e 'ngoe le e 'ngoe e bapile le lilepe tsa X, Y, Z | ||||
|
TŠIRELETSO LE EMC |
TS'IRELETSO MAEMO | CB IEC61800-5-1,TUV/BS EN/EN61800-5-1,EAC TP TC004 e amohetsoe | |||
| EMELANG KOLOKOTAGE | I/P-FG:2KVAC | ||||
| HO IKAOA KHANYETSO | I/P-FG:100M Ohms/500VDC/25℃/ 70%RH | ||||
|
EMC TS'ISITSO |
Paramethara | Standard | Teko Boemo / Hlokomela | ||
| E etsoa | TS EN/EN IEC61800-3 | Sehlopha sa A, C2 | |||
| E khantsitsoe | TS EN/EN IEC61800-3 | Sehlopha sa A, C2 | |||
| E tsamaellanang hona joale | TS EN/EN IEC61000-3-2 | Sehlopha sa A | |||
| Moqtagle Flicker | TS EN/EN61000-3-3 | —– | |||
|
TSIETSI EMC |
BS EN/EN IEC61800-3, tikoloho ea bobeli | ||||
| Paramethara | Standard | Teko Boemo (bo-le-ha-na) /Note | |||
| ESD | TS EN/EN61000-4-2 | Boemo ba 3, moea oa 8KV; Level 2, 4KV ikopanya | |||
| E khantsitsoe | TS EN/EN IEC61000-4-3 | Mohato 3 | |||
| EFT / Burest | TS EN/EN61000-4-4 | Mohato 3 | |||
| Ho phahama | TS EN/EN61000-4-5 | Boemo ba 3, 2KV / Line-Earth; Level 3, 1KV/Mola-Mola | |||
| E etsoa | TS EN/EN61000-4-6 | Mohato 3 | |||
| Tšimo ea Magnetic | TS EN/EN61000-4-8 | Mohato 4 | |||
| Moqtage Dips le Litšitiso | TS EN/EN IEC61000-4-11 | > 95% e qoelisa linako tse 0.5, 30% e qoelisa linako tse 25,
> 95% litšitiso 250 linako |
|||
| Moqtage kheloha | Sehlopha sa 61000 sa IEC 2-4-2 | ±10% Un | |||
| Total Harmonic distortion (THD) Litaelo tsa motho ka mong tsa Harmonic | Sehlopha sa 61000 sa IEC 2-4-3
Sehlopha sa 61000 sa IEC 4-13-3 |
THD 12 % | |||
| Ho fapana ha maqhubu | Tlhaloso: IEC 61000-2-4 | ±4% | |||
| Sekhahla sa phetoho | Tlhaloso: IEC 61000-2-4 | 2%/s | |||
|
BA BANG |
MTBF | 2078.9K hrs min.Telcordia SR-332 (Bellcore); 191.5K hrs min.MIL-HDBK-217F (25℃) | |||
| DIMENSION (L*W*H) | 146*62*31mm | ||||
| PAKA | 0.38Kg;32pcs/13.18kg/0.87CUFT | ||||
HLOKOMELA:
- 3-mohato 220V motor e buelloa. Ka kopo, nahana ka sekhahla sa hajoale ha se sebelisoa bakeng sa enjene ea sehlopha sa 100-120V.
- Sheba bokhoni ba hona joale ba tlhōrō ho "V/I Curve".
- Ho sebetsa hantle ho lekoa ka mojaro oa inductive ka matla a lekantsoeng a hajoale le a felletseng.
- Litekanyetso tsohle HA li boleloe ka ho khetheha li lekantsoe ka 230VAC, mojaro o lekantsoeng le 25 ° C ea mocheso o tikolohong.
- Ka kopo sheba "Functional Manual" bakeng sa lintlha tse ling.
Boitlhotlhollo ba Boikarabelo ba Sehlahisoa: Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba ho https://www.meanwell.com/serviceDisclaimer.aspx
Setšoantšo se Thibeloang
V/KE KHOBA
Derating mothinya
Tlhahiso e hlahisang VS Input Voltage
Peak Current
Katleho vs Mojaro
Buka ea mosebetsi
- Taolo ea PWM ea 3-mohato (CN93, PIN8~13)
VFD-350C-230 e fana ka potoloho ea li-switch tse tšeletseng ka ho sebelisa 3 half-bridge IGBTs. Li-IGBT tsa mohato ka mong li laoloa ke PWM_UH/U,, PWM_V,N, le PWM_W,/W, (PIN 8~13). Tlhokahalo ea ho kenya PWM e lumellana le matšoao a mabeli a TTL le CMOS 3.3V. Ka kopo sheba setšoantšo se ka tlase.
TLHOKOMELO: Hoa hlokahala ho boloka bonyane nako ea ho shoa lipakeng tsa switch e holimo le e tlase ea mohato ka mong.
3-mohato oa 93 oa ho Lemoha le Tšireletso ea Overcurrent (CN4, PIN6~XNUMX)
Li-shunt-side shunt resistors 100m li kentsoe karolong e 'ngoe le e 'ngoe ea VFD-350C-230 bakeng sa tekanyo ea hona joale le ho lemoha nako e khutšoanyane. Ho khothaletsoa ho khutsufatsa bolelele ba potoloho ea ponelopele ea kantle le ho lemoha lets'oao ka li-OPA. Ka kopo sheba setšoantšo se ka tlase.
Haeba tlhahiso ea hona joale e feta 200% ea boleng bo lekantsoeng, potoloho ea tšireletso ea ka hare e tla qala ebe e koala mokhanni oa heke bakeng sa tšireletso.
DC BUS VoltagHo fumanoa ha e (CN93, PIN1)
VFD-350C-230 e hahiloe kahare ka bese ea DC voltagsensor ea e (HV+ sensor, PIN 1). Sensor e fana ka tlhahiso ea 2.5V ha DC bese voltagE ka 380V. Ho khothaletsoa ho bona lets'oao ke li-OPA. Ha voltage ea bese ea DC e feta 420V, lets'oao la ho kenya PWM le tlameha ho tima bakeng sa ts'ireletso.
Ho lemoha mocheso oa IGBT (CN93, PIN3)
VFD-350C-230 e hahiloe ka har'a mohanyetsi oa NTC bakeng sa ho bona mocheso oa IGBT. Basebedisi ba ka lemoha mocheso oa IGBT bakeng sa tšireletso. (Mofuta oa NTC: TSM2A103F34D1R, Thinking Electronic) Potoloho e khothalletsoang ea ho lemoha e ka tlase. Ho khothaletsoa ho koala sekheo sa PWM, haeba mocheso o ka holimo ho 100°C.
Letšoao la phoso
Haeba VFD-350C-230 e kopana le boemo bo feteletseng 'me e lula e le boemong boo bakeng sa nako e fokolang ea nako e telele, lets'oao la FAULT le tla sebelisoa (le sebetsang tlase) ho tsebisa molaoli oa kantle kapa potoloho.
Litlhahiso tsa Brake(CN100,PIN1,3)
VFD-350C-230 e boloketsoeng CN100 PIN1,3 e hokelang ho HV+,HV- bakeng sa moralo oa brake circuit. Boholo ba voltage ho DC Bus (HV+) e ke ke ea ba holimo ho 420V.
Tlhaloso ea Mechini
AC Inout Terminal Pin NO. Assianment (TB1).
| Pin No. | Kabelo | ||
| 1 | Tsela ea AC / L. | ||
| 2 | Tsela ea AC / N. | ||
| 3 | |||
Output Terminal Pin NO. Mosebetsi (TB100)
| Pin No. | Kabelo |
| 1 | U |
| 2 | V |
| 3 | W |
380V DC Bus Connector(CN100): JST B3P-VH kapa e lekanang le eona
| Pin No. | Kabelo |
| 1 | HV+ |
| 2 | Ha ho Pin |
| 3 | HV- |
- Mating House: JST VHR kapa e lekanang
- Theminale: JST SVH-21T-P1.1 kapa e lekanang le eona
- CN100 e sebelisetsoa ho kenya sesebelisoa sa brake se tsosolosang, ho qoba tšenyo ea VFD-350C-230.
Control Pin NO. Mosebetsi (CN93) : HRS DF11-14DP-2DS kapa e lekanang le eona
| Pin No. | Kabelo | Pin No. | Kabelo |
| 1 | HV+ sensor | 8 | PWM_W H |
| 2 | HV- | 9 | PWM_W L |
| 3 | RTH | 10 | PWM_V H |
| 4 | RSH _U | 11 | PWM_V L |
| 5 | RSH _V | 12 | PWM_U H |
| 6 | RSH _W | 13 | PWM_U L |
| 7 | PHOTO | 14 | Vaux_15V |
- Matlo a ho nyalana: HRS DF 11-14DS kapa e lekanang le eona
- Terminal HRS DF11 - ** SC kapa e lekanang
Mosebetsi oa Pin ea Taolo(CN93):
| Pin No. | Mosebetsi | Tlhaloso |
| 1 | HV+ sensor | DC BUS voltagtlhahiso ea sensor, ho buuoa ka pin 2 (HV-) |
| 2 | HV- | DC BUS voltagsebaka sa tlhahiso ea sensor |
| 3 | RTH | Sensor ea mocheso |
| 4 | RSH_U | U phase current sensor output |
| 5 | RSH_V | Phaello ea hona joale ea sensor ea V phase |
| 6 | RSH_W | W phase current sensor output |
| 7 | PHOTO | Ho fumaneha ha hajoale. Tloaelehileng> 3V, e sa tloaelehang <0.5V |
| 8 | PWM_WH | W phase high side logic input, on > 2.7V; ho tloha ho 0.4V |
| 9 | PWM_WL | W phase low low side logic input, on > 2.7V; ho tloha ho 0.4V |
| 10 | PWM_VH | V phase high side logic input, on > 2.7V ; ho tloha ho 0.4V |
| 11 | PWM_VL | V phase low low side logic input, on > 2.7V ; ho tloha ho 0.4V |
| 12 | PWM_UH | U phase high side logic input, on > 2.7V ; ho tloha ho 0.4V |
| 13 | PWM_UL | U phase low side logic input, on > 2.7V ; ho tloha ho 0.4V |
| 14 | Vaux_15V | Auxiliary voltage tlhahiso ea 15V e bua ka pin2 (HV-). Boemo bo phahameng ba hona joale ke 0.1A |
Kopo
Mohlala oa kopoampLe: Kopo ea koloi ea BLDC
- Palo e bonts'a sistimi ea koloi ea BLDC e thehiloeng ka VFD-350C-230.
- Bahlahisi ba ka laola lets'oao la PWM la 6-switch ka ho sebelisa SPWM kapa SVPWM, joalo-joalo bakeng sa 3-phase vol.tage feto-fetoha, 'me u hahe mokhoa oa ho laola li-sensor tsa hajoale tsa shunt ho switch ea lehlakore le tlase la 3-mohato (Rs-_U/V/W) le DC BUS vol.tagsensor ea e (HV + sensor) e fanoeng ke VFD-350C-230.
- Bahlahisi ba ka khetha li-sensor tse loketseng tsa boemo ba BLDC joalo ka encoder kapa Hall-effect sensors hore li lekane lits'ebetso tsa bona.
- Ho khothaletsoa ho kenya brake circuit/sesebelisoa ho HV+/HV- pin(DC BUS,CN100) ho qoba DC BUS OVP ha BLDC e theohile.
- Ho khothaletsoa ho koala sekheo sa PWM kapa ho hokela sesebelisoa sa brake resistor bakeng sa polokeho ha DC Bus vol.tage phahameng ho feta 420V.
- Haeba VFD-350C-230 e ne e sebelisoa ka taolo e sa nepahalang, joalo ka ho potlakisa haholo kapa taolo e mpe ea hajoale, e ka baka boemo ba phoso ba VFD-350C-230 ho koala phallo ea phallo.tage boemo bo tlase ho FAULT pin).
Ho kenya
- Sebetsa ka poleiti e eketsehileng ea aluminium
E le ho kopana le "Derating Curve" le "Static Characteristics", VFD letoto le tlameha ho kenngoa holim'a poleiti ea aluminium (kapa khabinete ea boholo bo lekanang) ka tlase. Boholo ba poleiti ea aluminium e hlahisitsoeng e bontšitsoe ka tlase. 'Me bakeng sa ho ntlafatsa ts'ebetso ea mocheso, poleiti ea aluminium e tlameha ho ba le bokaholimo bo lekanang le bo boreleli (kapa e koahetsoe ka mafura a mocheso),' me lihlopha tsa VFD li tlameha ho tiisoa ka thata bohareng ba poleiti ea aluminium.
- Ka moea o qobelloang oa 15CM
Lethathamo la lisebelisoa
Haeba u na le tlhokahalo efe kapa efe ea taolo ea kopo e ikhethileng, ka kopo ikopanye le MEAN WELL bakeng sa lintlha tse ling. Boto ea taolo ea makoloi (Boto ea taolo ea makoloi le module ea koloi ea VFD e lokela ho laeloa ka thoko):
Tšebeliso e Tloaelehileng
- Variable Frequency Module (VFD series)
- Boto ea taolo ea Variable Frequency Drive (E entsoe ke Mosebelisi kapa Soluton E fanoe ke MEAN WELL)
- 3-mohato Pump Motor
- Betri
- Variable Frequency Module (VFD series)
- Boto ea taolo ea Variable Frequency Drive (E entsoe ke Mosebelisi kapa Soluton E fanoe ke MEAN WELL)
- 3-phase Wheel Motor bakeng sa Kopo ea AGV.
- Variable Frequency Module (VFD series)
- Boto ea taolo ea Variable Frequency Drive (E entsoe ke Mosebelisi kapa Soluton E fanoe ke MEAN WELL)
- 3-mohato Fan Motor
- HEPA bakeng sa ho Sefa Moea
TŠEBELETSO KOTLO
Ka kopo, ikopanye le MEAN WELL bakeng sa lintlha tse ling.
VFD Demo Kit Mosebetsi oa Sehlooho le Likarolo.
- E hahelletsoeng ka VFD-350P-230 le 230V motor.
- Qaleha (//) /stop/ forward/ Taolo ya lebelo.
- Qala / emisa / pele / reverse indicator ka ho le letona.
- Pontšo ea lebelo la koloi (RDM).
- Boto ea taolo e ka nkeloa sebaka.
- Ts'ehetsa khokahano ea motlakase kantle.
Bukana ea ho kenya
Ka kopo, sheba: http://www.meanwell.com/manual.html.
Litokomane / Lisebelisoa
 |
MEAN WELL VFD-350C-230 AC Input Variable Frequency Drive Module le Mosebetsi oa PFC [pdf] Buka ea Mong'a VFD-350C-230 AC Input Variable Frequency Drive Module with PFC Function, VFD-350C-230, AC Input Variable Frequency Drive Module le PFC Function, Frequency Drive Module le PFC Function, Module le PFC Function, PFC Function, Function |
