MEAN-WELL PWM-120-12 Series Constant Voltage PWM Output LED Driver
AC Input: 100-240Vac (bakeng sa DA2-Type feela)
Buka ea Mosebelisi
Likaroloana
- Kamehla voltage PWM setaele tlhahiso
- Sesebelisoa sa mabone a tšohanyetso se fumaneha ho latela IEC61347-2-13
- Ts'ebetso ea PFC e hahiloeng kahare le moralo oa sehlopha sa II
- No load power consumption <O.5W/ standby power consumption <O.5W(DA/DA2-type)
- E koahetsoe ka botlalo le boemo ba IP67
- Likhetho tsa mosebetsi: 3 ho 1 dimming (dim-to-off); DALI/DALl-2
- Boemo bo tlase ba dimming 0.2% bakeng sa mofuta oa DALI
- Nako e tloaelehileng ea bophelo> lihora tse 50000 le waranti ea lilemo tse 5
Lisebelisoa
- Leseli la lebone la LED
- Lebone la LED le ka hare
- Leseli le khabisitsoeng ka LED
- Leseli la mehaho ea LED
- Mabone a indasteri
- Tlanya "HL" bakeng sa ho sebelisoa sehlopheng sa l, karolo ea 2 sebaka se kotsi (se khethiloeng).
GTIN KHOUTU
MW Search: https://www.meanwell.com/serviceGTlN.aspx
Tlhaloso
Letoto la PWM-120 ke mokhanni oa LED oa 120W AC/DC o nang le matla a sa feleng.tage mode with P WM style output, which is able to maintain the color temperature and the brightness homogeneity when driving all kinds of LED strips. PWM-120 operates from 90—305VAC and offers models with different rated voltage ranging between 12V and 48V. Thanks to the high efficiency up to 90.5%, with the fanless design, the entire series is able to operate for -40 C +90 C case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for dry, damp kapa libaka tse metsi. PWM-120 e na le ts'ebetso ea dimming e fetolang potoloho ea mosebetsi oa tlhahiso, e fana ka phetoho e kholo bakeng sa lisebelisoa tsa lisebelisoa tsa LED.
Moetso oa khouto ea mohlala
TS'ELISO
| MOHLALA | EA-120-PW | EA-120-PW | EA-120-PW | EA-120-PW | |
|
SEHLOOHO |
DC VOLTAGE | 12V | 24V | 36V | 48V |
| RETŠELISITSOE NKHOANE | 10A | 5A | 3.4A | 2.5A | |
| REKETSO MATLA | 120W | 120W | 122.4W | 120W | |
| LIEKETSENG DIMM | 0 ~ 100% | ||||
| MAIKETLO A PWM (Mofuta.) | 1.47kHz bakeng sa Blank/DA-Type, 2.5kHz bakeng sa DA2-Type | ||||
| SETUP, TSOSA NAKO Hlokomela. 2
Hlokomela. 9 |
500ms, 80ms/230VAC kapa 115VAC | ||||
| NAKO EA HO PHETHA (Mofuta.) | 16ms / 230VAC kapa 115VAC | ||||
|
KEKETSO |
TLHOKOMELOTAGE RETS'ELA Hlokomela.3 | 90 ~ 305VAC 127 ~ 431VDC
(Ka kopo, sheba karolo ea "STATIC CHARACTERISTIC") |
|||
| MOEKETSENG MAKOANE | 47 ~ 63Hz | ||||
| SEBETSO SA MATLA (Typ.) | PF> 0.97 / 115VAC, PF> 0.96 / 230VAC, PF> 0.93 / 277VAC @ mojaro o felletseng
(Ka kopo, sheba karolo ea "POWER FACTOR (PF) CHARACTERISTIC") |
||||
| KAOFELA HARMONIC PHETOLO | THD<20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC)
(Ka kopo sheba karolong ea "TOTAL HARMONIC DISTORTION") |
||||
| KATLEHO (Mofuta.) | 88.5% | 90% | 90% | 90.5% | |
| AC CURRENT (Mofuta.) | 1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC | ||||
| INRUSH CURRENT (Mofuta.) | COLD QALA 60A(twidth=520μs e lekantsoeng ho 50% Ipeak) ho 230VAC; Ho latela NEMA 410 | ||||
| MAX. NO. ea li-PSU ho 16A CIRCUIT BREAKER | Li-unit tse 4 (sekhechana sa potoloho ea mofuta oa B) / likarolo tse 6 (sekheo sa potoloho sa mofuta oa C) ho 230VAC | ||||
| LEAKAGE NKHOANE | <0.25mA / 277VAC | ||||
| HA HO MORORO/STANDBY TIRISO EA MATLA | Ha ho tšebeliso ea matla ea mojaro <0.5w bakeng sa mofuta o se nang letho; tšebeliso ea matla e emeng <0.5W bakeng sa mofuta oa DA/DA2-mofuta | ||||
|
TS'IRELETSO |
KHAHLISA | 108 ~ 130% e lekantsoe matla a tlhahiso | |||
| Hiccup mode, e hlaphoheloa ka bo eona ka mor'a hore boemo ba phoso bo tlosoe | |||||
| POTOLOHO E KHUTSOANE | 12V/24V hiccup mode le 36V/48V shut down mode(ho kenyeletsoa mofuta oa DA/ntle le mofuta oa DA2) Hiccup mode, e hlaphoheloa ka bo eona ka mor'a hore boemo ba phoso bo tlosoe (feela bakeng sa mofuta oa DA2) | ||||
|
KHAHLISO SEFOLITAGE |
15 ~ 17V | 28 ~ 34V | 41 ~ 46V | 54 ~ 60V | |
| Koala o/p voltage, matlafatsa hape ho fola | |||||
| PHEKO MOCHESO | Koala o/p voltage, matlafatsa hape ho fola | ||||
|
TIKOLOHO |
MOSEBETSI TEMPELA. | Tcase=-40~+90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section) | |||
| MAX. TLHALOSO TEMPE. | Mokotlana = + 90 ℃ | ||||
| MOSEBETSI MOKOBELO | 20 ~ 95% RH e sa lumellaneng | ||||
| POLOKO TEMP., HUMIDITY | -40 ~ + 80 ℃, 10 ~ 95% RH | ||||
| MOEKETSI. TIISETSO MOKHOA | ± 0.03% / ℃ (0 ~ 45 ℃, ntle le 0 ~ 40 ℃ bakeng sa 12V) | ||||
| TSIETSO | 10 ~ 500Hz, 5G 12min./1cycle, nako ea 72min. e 'ngoe le e 'ngoe e bapile le lilepe tsa X, Y, Z | ||||
|
POLOKO & EMC |
POLOKO LIEKETSENG Hlokomela. 5 |
UL8750( type ”HL” )(except for 12DA type), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,
BS EN/EN62384 independent, IP67,BIS IS 15885(Part2/Sec13)(for 12,24 Blank and DA2 Type), EAC TP TC 004, GB19510.1,GB19510.14 approved; Design refer to BS EN/EN60335-1; According to BS EN/EN61347-2-13 appendix J suitable for emergency installations(EL)(AC Input: 100-240Vac)(for DA2-Type only) |
|||
| DALI LITEKELO | IEC62386-101, 102, 207,251 bakeng sa DA/DA2-Mofuta feela, Mofuta oa sesebelisoa 6(DT6) | ||||
| EMELANG KOLOKOTAGE | I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC | ||||
| HO IKAOA KHANYETSO | I/PO/P: 100M Ohms / 500VDC / 25℃/ 70% RH | ||||
| EMC TS'ISITSO Hlokomela. 6 | Ho lumellana le BS EN/EN55015, BS EN/EN61000-3-2 Sehlopha sa C (@load≧60%) ; BS EN/EN61000-3-3,GB/T 17743, GB17625.1;EAC TP TC 020 | ||||
| TSIETSI EMC | Ho lumellana le BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, boemo ba indasteri e bobebe (surge immunity Line-Line 2KV), EAC TP TC 020 | ||||
| BA BANG | MTBF | 2243.7K lihora tsa mets. Telcordia SR-332 (Bellcore); 228.7K lihora tsa mets. MIL-HDBK-217F (25℃) | |||
| TŠEBELETSO | 191*63*37.5mm (L*W*H) | ||||
| PAKA | 0.97Kg; 15pcs / 15.6Kg / 0.87CUFT | ||||
|
HLOKOMELA |
1. Litekanyetso tsohle TSE SA boleloang ka ho khetheha li lekantsoe ka 230VAC, e lekantsoe hona joale le 25℃ ea mocheso o tikolohong.
2. Ho ka 'na ha hlokahala hore ho fokotsoe tekanyo tlas'a phallo e tlaase ea voltages. Ka kopo sheba likarolo tsa "STATIC CHARACTERISTIC" ho fumana lintlha. 3. Length of setup time is measured at first cold start. Turning ON/OFF the driver may lead to an increase of the setup time. 4. Mokhanni o nkoa e le karolo e tla sebetsoa hammoho le thepa ea ho qetela. Kaha ts'ebetso ea EMC e tla angoa ke ho kengoa ka botlalo, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho fumana lengolo la EMC Directive mabapi le ts'ebetso e felletseng hape. (e fumaneha ho https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃or less. 6. Ka kopo sheba setatemente sa tiisetso ho MEAN WELL's website at http://www.meanwell.com 7. Thempereichara e fokotsehileng ea 3.5℃/1000m ka mefuta e se nang fene le ea 5℃/1000m e nang le mefuta ea fene bakeng sa bophahamo ba ho sebetsa ho feta 2000m(6500ft). 8. Bakeng sa tlhokomeliso efe kapa efe ea kopo le tlhokomeliso ea ts'ebetso ea ts'ebetso ea bopaki ba metsi ea IP, ka kopo sheba bukana ea rona ea mosebelisi pele u e sebelisa. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 9. E ipapisitse le matla a IEC 62386-101 / 102 DALI mabapi le melao ea nako le tšitiso, nako e behiloeng e hloka ho lekoa ka molaoli oa DALI ea ka tšehetsang matla a DALI mosebetsing, ho seng joalo nako ea ho seta e tla ba e phahameng ho feta 0.5 motsotsoana Mofuta oa DA. ※ Boitlhotlhollo ba Boikarabelo ba Sehlahisoa: Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba ho https://www.meanwell.com/serviceDisclaimer.aspx |
||||
MOSEBETSI OA DIMMING
Molao-motheo oa ho fifala bakeng sa tlhahiso ea setaele sa PWM
Ho fifala ho fihlelleha ka ho fapanya potoloho ea mosebetsi oa sehlahisoa sa hajoale.
3 ho 1 ts'ebetso ea dimming (bakeng sa Mofuta o se nang letho)
- Sebelisa o mong oa mekhoa e meraro lipakeng tsa DIM+ le DIM-: 0 ~ 10VDC, kapa 10V PWM lets'oao kapa khanyetso.
- Mohloli o ntseng o fokotseha ho tloha phepelong ea motlakase: 100μA (mofuta.)
Ho sebelisa tlatsetso 0 ~ 10VDC
Ho kenya lets'oao la tlatsetso la 10V PWM (maqhubu a maqhubu a 100Hz ~ 3KHz):
Ho sebelisa li-additive resistance:
Hlokomela :
- Min. duty cycle of output current e ka ba 0.15%, mme dimming input e ka ba 6KΩ kapa 0.6VDC, kapa 10V PWM signal with 6% duty cycle.
- Mosebetsi oa potoloho ea tlhahiso ea hona joale o ka theohela ho 0% ha tlhahiso ea dimming e le ka tlase ho 6KΩ kapa ka tlase ho 0.6VDC, kapa 10V PWM pontšo e nang le potoloho ea mosebetsi e ka tlaase ho 6%.
DALI Interface (lehlakore la mantlha; bakeng sa DA/DA2-Type)
- Kenya lets'oao la DALI lipakeng tsa DA+ le DA-.
- Protocol ea DALI e na le lihlopha tse 16 le liaterese tse 64.
- Mohato oa pele o tsitsitse ho 0.2% ea tlhahiso
OUTPUT LOAD vs TEMPERATURE
TŠOANELO STATIC
MATLA (PF) TŠEBELETSO
Mocheso oa mocheso oa 80 ℃
PHETHAHETSO EA HARMONIC
(THD)
KATLEHO vs MOJARO
Letoto la PWM-120 le na le ts'ebetso e phahameng ea ts'ebetso hoo ho ka fihleloang ho fihla ho 90.5% lits'ebetsong tsa masimong.
Mohlala oa 48V, Tcase ho 80 ℃
BOPHELONG
Setšoantšo se Thibeloang
Tlhaloso ea Mechini
Khothaletsa Tataiso ea ho Nyoloha
Bukana ea ho kenya
Khokahano bakeng sa mofuta oa Blank
Litemoso
- Pele o qala mosebetsi ofe kapa ofe oa ho kenya kapa oa ho lokisa, ka kopo, khaola motlakase ho sesebelisoa. Netefatsa hore e ke ke ea kopanngoa hape ka phoso!
- Keep proper ventilation around the unit and do not stack any objects on it. Also, a 10-15 cm clearance must be kept when the adjacent device is a heat source.
- Mounting orientations other than standard orientation or operating under high ambient temperature may increase the internal component temperature and require a de-rating in output current.
- Lintlha tsa hajoale tsa thapo e amohetsoeng ea mantlha / ea bobeli e lokela ho ba kholo ho feta kapa ho lekana le ea yuniti. Ka kopo sheba litlhaloso tsa eona.
- Bakeng sa bakhanni ba LED ba nang le likhokahano tse sa keneleng metsi, netefatsa hore khokahano lipakeng tsa yuniti le sesebelisoa sa mabone e tiile e le hore metsi a se ke a kenella tsamaisong.
- For dimmable LED drivers, make sure that your dimming controller is capable of driving these units.PWM series requires 0.15mA each unit.
- Tc max. is identified on the product label. Please make sure that the temperature of the Tc point will not exceed the limit.
- U SE KE UA hokela "DIM- ho -V".
- E loketse ts'ebeliso ea kahare kapa ts'ebeliso ea kantle ntle le khanya ea letsatsi e tobileng. Ka kopo qoba ho qoelisoa metsing ka metsotso e fetang 30.
- The power supply is considered a component that will be operated in combination with the final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
LBH
- P: Ke lokela ho etsa eng haeba mokhanni oa LED a sa bone matla?
A: Lekola khokahanyo ea matla a kentsoeng 'me u netefatse hore voltage source is within the specified range. - P: Na nka hokela li-LED tse ngata ho mokhanni a le mong?
A: It is recommended to follow the manufacturer’s guidelines on the maximum number of LEDs that can be connected to a single driver to ensure proper functionality and longevity of the LEDs.
Litokomane / Lisebelisoa
 |
MEAN-WELL PWM-120-12 Series Constant Voltage PWM Output LED Driver [pdf] Buka ea Mong'a PWM-120-12, PWM-120-24, PWM-120-36, PWM-120-48, PWM-120-12 Series Constant Vol.tage PWM Output LED Driver, PWM-120-12 Series, Constant Voltage PWM Output LED Driver, Moqtage PWM Output LED Driver, PWM Output LED Driver, Output LED Driver, LED Driver |