M-AUDIO Oxygen Pro 25 USB MIDI Keyboard Controller

Litlhaloso

• Mohlala: Oxygen Pro 25
• Litaba tsa Lebokose: USB Cable, Software Download Card, Quickstart Guide, Safety & Warranty Manual
• Software e kenyellelitsoeng: MPC Beats, Pro Tools | Khatiso ea pele ea M-Audio, Ableton Live Lite, Liphutheloana tsa Katoloso, sesebelisoa sa AIR se fumanehang plugins

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenya Software ea hau e kenyellelitsoeng

Ho qala ho sebelisa Oxygen Pro 25 ea hau bakeng sa tlhahiso ea 'mino, latela mehato ena:

1. Ngolisa Oxygen Pro 25 ea hau ho m-audio.com ho khoasolla software e kenyellelitsoeng.
2. Kenya MPC Beats, Pro Tools | Khatiso ea Pele ea M-Audio, kapa Ableton Live Lite ho latela litaelo tsa ho instola Akhaontong ea hau ea Mosebelisi.
3. Khoasolla le ho kenya sesebelisoa sa AIR plugins ka ho latela litaelo tse kareteng ea ho jarolla software.

E lokisa Ableton Live Lite

Latela mehato ena ho theha Ableton Live Lite ka Oxygen Pro 25 ea hau:

1. Hokela Oxygen Pro 25 komporong ea hau ebe u qala Ableton Live Lite.
2. Fumana Likhetho 'me u tsamaise ho ea ho File Taba ea foldara.
3. Khetha foldara e nepahetseng ea plugin bakeng sa ho skena sesebelisoa sa sebele plugins.

Ho lokisa Lisebelisoa tsa Pro | Khatiso ea pele ea M-Audio

Ho theha Lisebelisoa tsa Pro | Khatiso ea pele ea M-Audio e nang le Oxygen Pro 25, etsa se latelang:

1. Hokela O oxygen Pro 25 komporong ea hau ebe u qala Lisebelisoa tsa Pro | Khatiso ea pele ea M-Audio.
2. Theha morero 'me u lokise lisebelisoa tsa MIDI Input ho nolofalletsa Oxygen Pro 25 e le sesebelisoa sa ho kenya.
3. Theha pina e ncha ea lisebelisoa 'me u kenye lisebelisoa ha ho hlokahala bakeng sa tlhahiso ea' mino.

Litaba tsa Lebokose

• Oxygen Pro 25
• Cable ea USB
• Software Download Card
• Tataiso e potlakileng
• Buka ea Tšireletseho & Tiisetso

Tlhophiso

Ho qala ho sebelisa Oxygen Pro 25 ea hau, o hloka ho hokela sesebelisoa sa hau, o lokise software ea hau hantle, ebe o seta Mode oa ts'ebetso ea keyboard.

Ho hokela Oxygen Pro 25 komporong ea hau, sebelisa thapo ea USB e kenyellelitsoeng. Hokela pheletso ea USB-B ho keyboard le pheletsong ea USB-A komporong ea hau (kapa hub ea USB e hoketsoeng komporong ea hau).

Hlokomela: Ntle le ho romella data, thapo ea USB e matlafatsa keyboard. Haeba u tla be u hokela Oxygen Pro 25 ho hub ea USB e nang le lisebelisoa tse ling tse hoketsoeng ho eona, joale re khothaletsa ho sebelisa hub ea USB e tsamaisoang ka matla.

Ho lokisa DAW ea hau hore e sebetse le Oxygen Pro 25, nolofalletsa Oxygen Pro 25 hore e be sebaka sa taolo ea MIDI ho menu ea litlhophiso tse nepahetseng ka har'a DAW (Likhetho, Likhetho, Setupo sa Sesebelisoa, joalo-joalo).

Haeba u tla be u sebelisa Oxygen Pro 25 le MPC Beats e kenyelelitsoeng, Pro Tools | Pele M-Audio Edition, kapa software ea Ableton Live Lite, bona Ho Instola Software ea Hao e Kenyellelitsoeng bakeng sa litaelo tse tobileng mabapi le ho lokisa DAW ea hau ka Oxygen Pro 25. Haeba u tla be u sebelisa DAW e fapaneng, sheba bukana ea mosebelisi e fanoeng le DAW bakeng sa thuso e eketsehileng. ka mohato ona.

Haeba u tla be u sebelisa Oxygen Pro 25 e nang le synth ea hardware ho e-na le khomphuta ea hau, hokela sekepe sa Oxygen Pro 25's MIDI Out ho synth e nang le thapo e tloaelehileng ea 5-pin MIDI. Ebe u etsa bonnete ba hore Oxygen Pro 25 e setiloe hore e sebetse ka e 'ngoe ea li-presets tsa eona tse khethiloeng (joalo ka ha ho laetsoe ho Seta Mokhoa oa Ts'ebetso oa Keyboard) le hore Oxygen Pro 25 e hlophiselitsoe ho romella data ea MIDI ho tsoa boema-kepeng ba 5-pin MIDI kantle ho naha. Litlhophiso tsa Global. E le hore u sebelise synth ea kantle ea hardware, u tla hloka ho hokahanya Oxygen Pro 25 khomphuteng, laptop, kapa ho hub ea USB e tsamaisoang ka matla.

Ho kenya Software

Ho kenya Software ea hau e kenyellelitsoeng

Re kenyelelitse MPC Beats, Pro Tools | Khatiso ea Pele ea M-Audio, le Ableton Live Lite e nang le Oxygen Pro 25 hore u tle u qale ho etsa 'mino ka software ea profeshenale ka ntle ho lebokose. Ho feta moo, re kenyelelitse sehlopha sa Lipakete tsa Katoloso le lisebelisoa tsa AIR plugins eo u ka e sebelisang le DAW ea hau.

Ho khoasolla MPC Beats e kenyellelitsoeng, Lisebelisoa tsa Pro | Pele M-Audio Edition, kapa software ea Ableton Live Lite, ngodisa Oxygen Pro 25 ya hao ho m-audio.com mme o latele ditaelo tsa ho instola Akhaontong ya Mosebedisi. Haeba u tla be u sebelisa Ableton Live Lite, re khothaletsa ho etelaableton.com ho lekola lintlafatso tsa software tse teng. Bakeng sa thuso ea ho hlophisa DAW ka Oxygen Pro 25, bona Pro Tools | Tlhophiso ea Pele ea Khatiso ea M-Audio kapa Ableton Live Lite Setup ka tlase.

Ho khoasolla sesebelisoa sa AIR se kenyellelitsoeng plugins, latela litaelo tse kareteng ea ho jarolla software ka lebokoseng. Kamora ho kenya, li-DAW tse ngata li ke ke tsa kenya lisebelisoa tsa sebele plugins ka tsela e iketsang; ho ka 'na ha hlokahala hore u ikhethele foldara ea plug-in hore software ea hau e hlahlobe. Li-folders tsa plugin tsa Pro Tools | Khatiso ea pele ea M-Audio le Ableton Live Lite e itšetlehile ka sistimi ea hau ea ts'ebetso, joalo ka ha ho boletsoe ka tlase.

Lisebelisoa tsa Pro | Li-folders tsa pele tsa M-Audio Edition/AAX plugin

• Lifensetere (32-bit): C: \ Lenaneo Files (x86)\ Tloaelehileng Files\Avid\Audio\plug-Ins
• Lifensetere (64-bit): C: \ Lenaneo Files\ Tloaelehileng Files\Avid\Audio\plug-Ins
• MacOS: Macintosh HD/Laebrari/Tšehetso ea Kopo/Avid/Audio/plug-Ins

Ableton/VST Plugins

• Lifensetere (32-bit): C: \ Lenaneo Files (x86)\VSTplugins
• Lifensetere (64-bit): C: \ Lenaneo Files\VSTplugins
• MacOS: Macintosh HD/Laeborari/Audio/Plugins/VST

Ho seta foldara ea hau ea plugin ho Ableton Live Lite

1. Eya ho menu ya Dikgethollo.
2. Khetha ea File Taba ea foldara. Tlas'a Mehloli ea Plug-In, tlanya Batla ebe u khetha foldara e nepahetseng ea plugin (joalo ka ha ho boletsoe ka holimo).
3. Kamora ho etsa khetho ea hau, konopo ea Sebelisa VST Custom Plug-In Folder e lokela ho BUA. Haeba ho se joalo, tobetsa konopo ho e bulela. Joale o ka tsoa ho menu ea Likhetho.

Setapo sa Ableton Live Lite

1. Taba ea pele, hokela O oxygen Pro 25 komporong ea hau. Ebe u qala Ableton Live Lite.
2. Bula fensetere ea Ableton Live Lite Preferences. Haeba u sebelisa Mac, ea ho Live > Likhetho. Haeba u sebelisa PC, e ea ho Likhetho> Likhetho.
3. Khetha konopo ea Link / MIDI ka letsohong le letšehali. Tlas'a karolo ea MIDI Ports, fetola litlhophiso ka tsela e latelang:
   • Tlas'a Sebaka sa Taolo, bakeng sa Input le Output khetha Oxygen Pro 25.
   • Haufi le Input: Oxygen Pro 25, khetha Bula ka har'a pina le likholomo tse hole.
   • Haufi le Output: Oxygen Pro 25, khetha Bula ka har'a pina le likholomo tse hole.
4. Koala fensetere ea Likhetho.
5. Ho kenya sesebelisoa kapa plugin ho qala ka Oxygen Pro 25, khetha Lisebelisoa kapa Li-plug-ins kholumong ea Lihlopha.
6. Khomong ea Lebitso ka ho le letona la kholomo ea Lihlopha, fumana Sesebelisoa kapa Plug-in ea khetho ea hau. Tobetsa-'me u hule sesebelisoa pina ea MIDI ho Ableton Live Lite ho kenya seletsa.
   Hona joale Sesebelisoa se ka hlahisoa ka Oxygen Pro 25.

Lisebelisoa tsa Pro | Tlhophiso ea Pele ea Khatiso ea M-Audio

1. Hokela O oxygen Pro 25 komporong ea hau. Ebe u qala Lisebelisoa tsa Pro | Khatiso ea pele ea M-Audio.
2. Bula kapa Etsa Morero.
3. Khetha "Setup pulldown" ebe u bula lisebelisoa tsa MIDI Input. Numella Kenyeletso ea MIDI ho tsoa ho Oxygen Pro 25 ka ho tobetsa lebokose le haufi le Oxygen Pro 25.
4. Theha pina e ncha ea sesebelisoa ka ho khetha menu ea ho hula pina ebe o tobetsa Ncha.
5. Ho menu e Ncha ea ho hula, khetha Stereo ebe u latela Instrument Track.
6. Pineng e sa tsoa etsoa, ​​​​kenya Kenya pina ea hau ka ho tobetsa Inserts AE ea pina ea hau ebe u khetha Multichannel plugin > Sesebelisoa. Khetha sesebelisoa seo u ka ratang ho se sebelisa, joalo ka Xpand!2 (Stereo).
   Hona joale plugin e ka hlahisoa ka Oxygen Pro 25.

Setheo sa Preset

Ho khoasolla software e kenyellelitsoeng ea Preset Editor, latela litaelo tse kareteng ea ho jarolla software ka lebokoseng. Software ena e ka sebelisoa ho etsa limmapa tse tloaelehileng tsa MIDI hore u li kenye ho Oxygen Pro 25. Bakeng sa boitsebiso bo eketsehileng mabapi le ho sebelisa keyboard ka e 'ngoe ea litlhophiso tsa tloaelo tse khethiloeng, sheba karolo e latelang le Ts'ebetso> Ho Sebelisa Limmapa Tse Tloaelehileng. Preset Editor e boetse e tla le Tataiso ea Mosebelisi ea Mohlophisi.

Ho beha Mokhoa oa Ts'ebetso oa Keyboard

Hang ha u se u thehile Oxygen Pro 25 hore e sebetse le DAW ea hau, ke nako ea ho beha Mokhoa oa ho sebetsa oa keyboard. Ka ho khetha Mokhoa oa ts'ebetso, o ka seta keyboard hore e ikamahanye le likarolo tsa DAW ea hau kapa oa e beha hore e sebetse joalo ka molaoli ea ikhethileng. Ka Mekhoa ena e 'meli, Oxygen Pro 25 e u fa khetho ea ho fetola kapele pakeng tsa ho laola plugin ho laola DAW ea hau ka ho tobetsa konopo feela.

Mekhoa e 'meli ea ts'ebetso e khetholla mosebetsi oa li-control tse ka fetolehang tsa keyboard ea MIDI:

• DAW: Ka Mokhoa oa DAW, litaolo tsa keyboard li tla etsoa 'mapa oa li-slider, likonopo, likonopo le lipache ho DAW ea hau.
• Seta pele: Ho Preset Mode, litaolo tse ka fetolehang tsa keyboard li ka hlophisoa hore e be mesebetsi eo u iqapetseng eona. Limmapa tse 'maloa tse seng li setiloe li ka etsoa, ​​​​'me tsa bolokoa mohopolong oa ka hare oa keyboard hore u ka li kenya hamorao.

Ho seta keyboard hore e sebetse Mokgweng wa DAW, tobetsa Konopo ya DAW/Preset. Konopo ea LED e tla khantša ho bontša hore DAW Mode e khethiloe.

Ho fetola lebokose la DAW le hlophisitsoeng hore le laole:

1. Tobetsa 'me u tšoare Konopo ea DAW ho bula DAW Khetha menu ho Display.
2. Fetolela Select/Scroll Encoder ho potoloha li-DAW tse fumanehang ho Display. Ha o ntse o bula encoder, DAW e khethiloeng hajoale e tla nchafatsoa ho Display. Khetho ea mosebelisi e u thusa ho etsa 'mapa oa taolo ea DAW ho keyboard, joalo ka ha ho hlalositsoe ho Ts'ebetso> Ho Sebelisa Limmapa tse Tloaelehileng.
3. Ha DAW eo u e batlang e bonts'oa ho Display, tobetsa Khetha/Scroll Encoder ho netefatsa khetho ea hau.
   Hlokomela: Ho tsoa Mokhoeng oa DAW ntle le ho fetola DAW e khethiloeng hajoale, tobetsa Konopo ea Morao.

Ho seta keyboard hore e sebetse ho Preset Mode, tobetsa konopo ea DAW/Preset. Konopo LED e tla tima ho bontša hore Preset Mode e khethiloe.

Ho fetola likhetho tse seng li khethiloe hona joale:

1. Tobetsa 'me u tšoare Konopo ea Preset ho bula menu ea Preset Select ho Pontšo.
2. Fetolela Select/Scroll Encoder ho potoloha li-Presets tse fumanehang ho Display. Ha o ntse o bula encoder, Preset e khethiloeng hajoale e tla nchafatsoa ho Display.
3. Ha setlankana seo u se batlang se bonts'oa ho Display, tobetsa ea Khetha/Scroll Encoder ho netefatsa khetho ea hau. Sheba Ts'ebetso > Ho Sebelisa Mebapa e Tloaelehileng ho fumana lintlha tse ling mabapi le li-Presets tsa 'mapa.

Likaroloana

Top Panel

Hlokomela: Mongolo o ka tlase o tsamaeang le li-keyboard o bonts'a mesebetsi ea bobeli e ka fihlellehang ka ho tobetsa Shift ha o ntse o sebelisa taolo.

1. Keybed: Keybed ena e utloang lebelo ke mokhoa oa mantlha oa ho romella lintlha tsa Note On/Off MIDI. Ntle le ho lemoha lebelo, keybed e boetse e kenyelletsa channel aftertouch, ho bolelang hore o ka ama molumo oo sesebelisoa sa plugin se se etsang ka ho fetola hore na u sebelisa khatello e kae holim'a senotlolo ka mor'a ho tobetsa konopo qalong.
   Tšoara Shift ebe o tobetsa likonopo C2–Bb3 ho edita li-setting tsa Chord Mode. Sheba Ts'ebetso> Ho Sebelisa Mesebetsi ea ka Hare ea Keyboard ho ithuta haholoanyane ka tšobotsi ena.
2. Likonopo tsa Octave: Tobetsa likonopo tsena ho fetola molumo oa lentsoe la linotlolo holimo kapa tlase octave e le 'ngoe. Tšoara Shift 'me u tobetse likonopo tsena ho fetola mofuta oa molumo oa linotlolo holimo kapa tlase semitone e le' ngoe. Khiboto e ka phahamisoa ho fihla ho li-octave tse hlano kapa ea theoleloa ho ea ho li-octave tse 'ne ho tloha sebakeng sa eona sa kamehla sa octave le kakaretso ea li-semitone tse leshome le metso e' meli ho tloha phetohong ea eona ea kamehla.
   Ho seta botjha Oxygen Pro 25 boemong ba yona ba kamehla ba octave le phetoho (C2–C4 hodima keybed), tobetsa Dikonopo tsa Octave – le Octave + ka nako e le nngwe.
3. Pits Bend Wheel: Rōlela lebili lena holimo le tlase ho tloha sebakeng se bohareng ho koba molumo oa keyboard ha u ntse u bapala. Sebaka sa kamehla sa pitch-bend se tla fapana lipakeng tsa software synths. Lebili le kentsoe nakong ea selemo 'me le tla khutlela sebakeng sa bohareng ha le lokolloa.
4. Lebili la Modulation: Tsamaisa lebili lena ho romela data e sa khaotseng ea molaoli—MIDI CC #01 (modulation), ka ho iketsa.
5. DAW/Konopo ea Preset: Tobetsa konopo ena ho seta Oxygen Pro 25 hore e sebetse ka DAW Mode kapa Preset Mode. Ha o le Mokhoeng oa DAW, LED ea konopo ena e tla khanya haholo. Ha o le Boemong ba Preset, LED ea konopo ena e tla tima. Tšoara Shift ebe o tobetsa konopo ena ho hlophisa Preset kapa User DAW. Kamora ho hlophisa Preset kapa User DAW, tobetsa konopo ena hape ho boloka liphetoho tsa hau ho User DAW kapa Preset. Tobetsa 'me u tšoare konopo ho bula DAW/Preset Khetha menu ho Display.
   Sheba Seta > Ho seta Mokhoa oa Ts'ebetso oa Keyboard bakeng sa tlhaiso-leseling e batsi ka DAW/Preset Mode. Sheba Ts'ebetso > Ho Sebelisa Mebapa e Tloaelehileng bakeng sa tlhahisoleseling mabapi le litlhophiso tsa 'mapa.
6. Hlahisa: Skrine se seholo sa Pontšo se bontša boemo ba taolo ea ho qetela e sebelisitsoeng. Sebelisa skrini sena ho beha leihlo maemo a paramethara ha u ntse u lokisa li-control keyboard. Hape, sebelisa Pontšo hammoho le Select/Scroll Encoder ho view 'me u fetole litlhophiso tsa keyboard. Sheba Ts'ebetso > Bontša holimoview bakeng sa lintlha tse ling mabapi le Pontšo.
7. Kgetha/Skrolla Encoder: Haeba u kentsoe ho e 'ngoe ea li-menu tsa Display's Edita, phetla konopo ena ho fetola litlhophiso/mekhahlelo ebe u tobetsa konopo ho netefatsa khetho.
   Haeba ha u joalo viewha u sebelisa menyetla efe kapa efe ea ho hlophisa, ho fetola sehatisi le ho tobetsa encoder e 'ngoe le e' ngoe e tla sebetsa joalo ka litaolo tse arohaneng tsa MIDI. Ha o sebetsa le DAW, litsamaiso tse fanoeng li tla reroa esale pele. Ha o sebetsa ka preset kapa Mosebelisi DAW a khethiloe, li-control li ka hlophisoa.
8. Konopo ea ho Khutlela: Haeba e kentsoe ho e 'ngoe ea li-menu tsa Display's Edit, tobetsa konopo ho khutlela skrineng se seholo sa Pontšo.
   Haeba ha u joalo viewho e 'ngoe ea li-menu tsa Edita, konopo ena e tla abeloa taolo. Ha o sebetsa le DAW, taolo e fanoeng e tla reroa esale pele. Ha o sebetsa ka preset kapa Mosebelisi DAW a khethiloe, taolo e ka hlophisoa. Ha u hlophisa lebitso la Preset kapa DAW tobetsa konopo ea Shift le konopo ea Back ho hlakola tlhaku.
9. Konopo ea Shift: Tšoara Konopo ea Shift ha u tsamaisa kapa u tobetsa li-control kapa likonopo ho keyboard ho fihlella mesebetsi ea bona ea bobeli.
10. << Konopo: Ho latela hore na skrineng se khethiloe ho DAW ea hau, konopo ena e tla khutlisa pina e butsoeng kapa e theohele tlase fensetereng e sebetsang.
11. >> Konopo: Ho latela hore na skrineng e khethiloe ho DAW ea hau, konopo ena e tla fetisa pina e butsoeng kapele kapa e nyolohele holimo ka fensetere e sebetsang.
12. Konopo ea Loop: Tobetsa konopo ena ho kenya ts'ebetsong / ho tima ts'ebetso ea loop ho DAW ea hau.
13. Konopo ea ho emisa: Tobetsa konopo ena ho emisa pina e bulehileng ho DAW ea hau. Tobetsa konopo ena habeli ho emisa pina e butsoeng le ho khutlisetsa sehlooho sa pina qalong ea pina. Tobetsa Shift 'me konopo ena ho romela molaetsa oa MIDI oa ho tšoha ho tima melaetsa eohle ea Note le ho khutlisetsa li-control tsohle ho zero.
14. Bapala Konopo: Tobetsa konopo ena ho bapala pina ho DAW ea hau.
15. Konopo ea ho Rekota: Tobetsa konopo ena ho kenya tšebetsong rekoto ho DAW ea hau.
16. Li-Buttons tsa Banka: Haeba e sebetsa ka DAW Mode kapa e 'ngoe ea litlhophiso tsa tloaelo, sebelisa likonopo tsena ho chencha banka e khethiloeng hajoale bakeng sa Li-Slider, Knobs, Pads, le Likonopo tsa Mosebetsi. Ho na le libanka tse 'ne bakeng sa li-control tsena, tse u fang chelete e lekanang le li-slider tse 4, li-knob tse 32 le li-pads tse 64. Tobetsa Shift le Banka <konopo ho notlela li-control tsa Shift modifier ARP knob. Sena se na le thuso bakeng sa ho fetola liparamente tsa ARP nakong ea ts'ebetso e phelang. Tobetsa Shift le Banka> konopo ho notlela li-control tsa Shift modifier Pad. Sena se na le thuso bakeng sa ho etsa liphetoho ha u ntse u kopanya pina. Ho khutlisetsa likonopo kapa lipache ho mokhoa oa tsona o tloaelehileng, tobetsa konopo ea Shift le konopo ea Bank <kapa Bank>.
17. Konopo ea Tempo: Tlanya konopo ena ho seta tempo ea Oxygen Pro 25 kapa u e tobetse 'me u e hatelle ho phahamisa menu ea Tempo Edita ho Display, moo o ka sebelisang Select/Scroll Encoder ho kenya tempo ka letsoho ebe u khetha ho hokahanya tempo ea Oxygen Pro 25 le DAW ea hau. Litlhophiso tsa tempo li ama arpeggiator ea keyboard le mesebetsi e pheta-phetoang. Sheba Ts'ebetso> Ho Sebelisa Mesebetsi ea ka Hare ea Keyboard bakeng sa lintlha tse ling.
    Tšoara Shift ebe o tobetsa konopo ena ho bulela/ tima metronome ea DAW ea hau.
18. Konopo ea ho Pheta Ela hloko: Tobetsa konopo ena ho kenya ts'ebetso ea ho pheta-pheta lintlha bakeng sa Pads. Ho hokela konopo e pheta-phetoang, tšoara Shift ebe o tobetsa konopo ena. Ha Note Repeat e ntse e sebetsa, Select/Scroll Encoder e ka sebelisoa ho fetola maemo a hajoale a Karolo ea Nako ea Arpeggiator le pad Note Repeat. Sheba Ts'ebetso> Ho Sebelisa Mesebetsi ea ka Hare ea Keyboard bakeng sa lintlha tse ling mabapi le ho pheta-pheta.
19. Mekotla: Sebelisa lipampitšana tsena tse utloang lebelo ho romela melaetsa ea MIDI On/Off kapa ho etsa likabelo tse ling tsa MIDI (haeba u sebelisa seta esale pele kapa User DAW). Tšoara Shift ha u ntse u tobetsa Pads 9–12 ho abela tšebetso ea Li-Knobs bocha, 'me u tšoare Shift ha u ntse u tobetsa Pads 13–16 ho sebelisa likhaoletso tsa DAW (sheba Ts'ebetso> Ho Sebelisa Litaolo tsa Bobeli Mokhoeng oa DAW ho ithuta haholoanyane).
20. Papali ea Pad Row: Tobetsa konopo ena ho bapala ka likhechana tsa molumo tse abetsoeng pad ka 'ngoe moleng o tsamaellanang oa li-pads. Ho ipapisitse le DAW, likonopo tsena li tla ba le mesebetsi e fapaneng.
21. Slider: Sutumelletsa selaete sena hodimo/tlase ho etsa ditaolo tseo o di abetsweng. Ha o sebetsa le DAW, litsamaiso tse fanoeng li tla reroa esale pele. Ha o sebetsa ka preset kapa Mosebelisi DAW a khethiloe, li-control li ka hlophisoa.
22. Likhopo: Fetolela likonopo tsena ka ho le letšehali/ka ho le letona ho phetha litaelo tseo li li abetsoeng. Ha o sebetsa le DAW, litsamaiso tse fanoeng li tla reroa esale pele. Ha o sebetsa ka preset kapa Mosebelisi DAW a khethiloe, li-control li ka hlophisoa.
    Sheba Ts'ebetso> Ho Sebelisa Litaolo tsa Bobeli ho Mokhoa oa DAW ho ithuta ho fetola likabelo tse reriloeng esale pele tsa Knobs ha u sebetsa Moemong oa DAW ka DAW e khethiloeng.
    Tšoara Shift ha u ntse u fetola Knobs 1–4 ho hlophisa litlhophiso tsa arpeggiator. Sheba Ho Sebelisa Mesebetsi ea ka Hare ea Keyboard ho ithuta haholoanyane ka arpeggiator.
    Bohlokoa: Ka bobeli Slider le Knobs li nolofalitsoe ka "ho nka thepa e bonolo." Sena se bolela hore ha o fetola libanka, selaete kapa konopo e ke ke ea sebetsa ho fihlela e behiloe boleng ba hajoale ba taolo ea software e sa tsoa khethoa. Bakeng sa mohlalaample, haeba o suthisa Slider 1 ho Bank 1 ebe o fetohela ho Bank 2, Slider 1 ea 'mele e ke ke ea ama software Slider 2 ho fihlela selaete sa 'mele se behiloe boleng ba software ea Slider 2. Karolo ena e u lumella ho etsa liphetoho ho e le 'ngoe. banka ebe o fetola libanka ntle le ho etsa liphetoho tse sa batleheng taolong ea banka e ncha. Pontšo e tla bonts'a meter ea boleng bo chekiloeng haeba Slider kapa Knob e hloka ho suthisoa pele e ka "nka" taolo eo e e abetsoeng (sheba Display Over.view bakeng sa papiso).
    Bohlokoa: Ho Avid Pro Tools, lipina tsa stereo li na le li-control tse peli tsa panning: ka ho le letšehali le ka ho le letona. Tobetsa konopo ea Shift ho chencha likonopo lipakeng tsa kanale e letšehali le kanale e ka ho le letona. Haeba li-pan control li sa tsamaee ka pina ea mono, tobetsa konopo ea Shift ho fetola konopo ea pan ho laola taolo ea pan ka tloaelo.
23. Konopo ea Arp / Latch: Tobetsa konopo ena ho kenya tšebetsong arpeggiator. Tobetsa konopo ena hape ho fetola arpeggiator ho tloha nakoana ho ea ho Mode oa latch. Tšoara Shift ebe o tobetsa konopo ena ho hlophisa litlhophiso tsa arpeggiator.
24. Konopo ea Chord/Sekala: Tobetsa konopo ena ho kenya tšebetsong Mokhoa oa Chord. Tobetsa konopo ena habeli ho kenya Scale mode. Tšoara Shift ebe o tobetsa konopo ena ho hlophisa li-setting tsa Chord/Scale Mode.
    Sheba Ts'ebetso> Ho Sebelisa Mesebetsi ea ka Hare ea Keyboard ho ithuta haholoanyane ka likarolo tse boletsoeng ka holimo.

Panele e ka morao

1. Power switjha: Sebelisa switch ena ho tima kapa ho tima O oxygen Pro 25.
2. Sustain Pedal Keletso: Kenyelletso ena e amohela pedal ea nakoana ea ho kopana (ha e kenyelelitsoe). Ha e tobelitsoe, pedal ka ho etsa kamehla e tla boloka molumo oo u o bapalang 5 4 3 2 1 ntle le hore u behe menoana ea hau fatše holim'a linotlolo. Kenyelletso ea "pedal pedal" e ka etsoa 'mapa hape ho etsa mosebetsi o ikhethileng oa MIDI.
   Hlokomela: Polarity ea pedal e tsitsitseng e khethoa ke keyboard ha e qala. Ha keyboard ea Oxygen Pro 25 e ntse e sebetsa, ho nahanoa hore pedal ea "up" (Off). Ho bohlokoa hore pedal e se be boemong bo tlase pele e qala keyboard, kaha pedal e tla sebetsa ka ho furalla, 'me lintlha li tla tšoarella ha pedal e sa hatelloa.
3. Boema-kepe ba USB: Ha o hokahantsoe le komporo, kou ea USB e fana ka matla ho keyboard ebe e fetisetsa data ea MIDI.
4. MIDI E tsoa: Sebelisa thapo e tloaelehileng ea li-pini tse 5 tsa MIDI ho hokela kou ena ho synth ea hardware kapa sesebelisoa se seng sa MIDI.
   Hlokomela: Boema-kepe ba MIDI bo ka romella MIDI ho tsoa ho Oxygen Pro 25, komporo ea hau e hokahaneng, kapa ka bobeli. Kena ho Global Settings ho seta se rometsoeng ho MIDI Out.
5. Sehokelo sa Senotlolo sa Kensington®: Sehokedi sena se tsamaellana le likhoele tsa ts'ireletso tsa Kensington tse tloaelehileng bakeng sa ts'ireletso ea bosholu.

Tshebetso

Bontšaview

Sekrine sa Pontšo se ka Sehloohong

Ha u ntse u sebelisa Slider, Knobs, Pads, and Function Buttons tsa keyboard ha u ntse u sebetsa, Pontšo e tla nchafatsoa le banka ea hajoale bakeng sa taolo ea ho qetela e sebelisitsoeng, lebitso/nomoro ea taolo, boemo ba hajoale bo sebelisitsoeng ke taolo (00–127, haeba ho hlokahala), le methara ea kerafo e bonts'ang boemo (ha e le teng). Ha e ntse e sebetsa, skrine ea Display e tla ba le bokamorao bo botšo bo nang le mongolo o mosoeu.

Hlokomela: Pontsho e bontsha palo ya taolo ya software, e sa tshwaneng kamehla le palo ya taolo ya hardware keyboard ya hao. Bakeng sa mohlalaample, haeba keyboard e behiloe ho Bank 3, 'me u bulela Knob 1 keyboard, Pontšo e tla bala Knob 20, kaha hardware Knob 1 e laola software ea Knob 20 ha keyboard e behoa ho Bank 3.

Joalo ka ha ho hlalositsoe ho Likarolo> Phanele e kaholimo, Slider le Li-Knobs li nolofalitsoe ka ho nkuoa ha bonolo. Haeba u chencha libanka 'me Slider kapa Knob e hloka ho suthisoa pele e ka nka taolo eo e e abetsoeng, Pontšo e bontša sena ka ho bonts'a meter e nang le checkered, grey ka tlas'a boemo ba taolo. Joalokaha ho bontšitsoe ho exampka ho le letona, banka e sa tsoa fetisetsoa ho Bank 2, 'me Slider 1 e hloka ho sutumetsoa ho ea holimo hore e qale ho laola software ea Slider 10.

Fetola Menus

Ntle le ho bonts'a li-control tse sebelisitsoeng ho qetela ha o ntse o sebetsa, Display (hammoho le Select/Scroll Encoder) ke sesebelisoa sa hau sa mantlha sa ho hlophisa litlhophiso tse fapaneng tsa keyboard, ho kenyeletsoa likabelo tsa MIDI bakeng sa taolo e hlophisehang, litlhophiso tsa mesebetsi ea kahare ea keyboard (joalo ka arpeggiator), hammoho le litlhophiso tsa lisebelisoa tsa lefats'e.

Ha o kena ho Edita menu bakeng sa ts'ebetso efe kapa efe ea keyboard, Pontšo e tla bonts'a lebitso la menyu ea Edita, sebaka sa litlhophiso se totobalitsoeng bakeng sa ho hlophisoa, sebaka sa parametha se bonts'ang boemo ba hajoale ba tlhophiso, le li-blocks tse botlaaseng ba skrine ho bonts'a. hore na ke li-setting tse ling tse kae tse fumanehang ho Edita menu. Ha e ntse e kentsoe ho Edit menu, Pontšo e tla ba le bokamorao bo bosoeu bo nang le mongolo o motšo.

Ho tsamaisetsa har'a li-setting ho menu ea Edita, bula Khetha/Scroll Encoder ha sebaka sa li-setting se totobalitsoe.

Ho khetha tlhophiso eo o ka e editang, tobetsa ea Khetha/Scroll Encoder ha sebaka sa li-setting se totobalitsoe. Joale sebaka sa parameter se tla totobatsoa.

Ho hlophisa paramethara ea ho seta, khetha tlhophiso eo u batlang ho e hlophisa joalo ka ha e hlalositsoe ka holimo. Ebe u fetola Select/Scroll Encoder ha sebaka sa parameter se totobatsoa. Hang ha paramethara e lakatsehang e totobalitsoe, tobetsa ea Khetha/Scroll Encoder ho netefatsa tokiso. Joale Pontšo e tla khutlela ho totobatsa sebaka sa litlhophiso.

Ho tsoa ho Edita menu ntle le ho boloka liphetoho, tobetsa Konopo ea Morao. Ho tsoa ho menu ea Edita le ho boloka liphetoho, tobetsa konopo ea DAW/Preset.

Hlokomela: Litlhophiso tse fumanehang ho Edita menu li ka fetoha ho latela hore na u khetha li-parameter life. Bakeng sa mohlalaample, menu ea Arpeggiator Edita e fapana ho latela paramethara e khethiloeng bakeng sa maemo a Mofuta oa Arpeggiator.

Lisebelisoa

Ho sebelisa Litaolo tsa Bobeli ho Mokhoa oa DAW

• Le ha Mokhoa oa DAW o etselitsoe hore 'mapa o rarahaneng o seke oa hlokahala ho sebelisa Oxygen Pro 25 ka DAW ea hau, tse ling tsa li-control tsa keyboard li ntse li na le likarolo tse ngata tseo u ka li fetolang lipakeng tsa DAW Mode.

Ho Fetola Mosebetsi oa Li-Knobs ho Mokhoa oa DAW

Hlokomela: Ha se liparamente tsohle tse fumanehang ho DAW e ngoe le e ngoe.

• Ha e sebetsa ka DAW Mode, likonopo li ka etsa e 'ngoe ea mesebetsi e mene.
• Ho fetola tsela eo likonopo li sebetsang ka eona, tšoara Konopo ea Shift ebe u tobetsa Pad 9, 10, 11, kapa 12. Mesebetsi e latelang ea fumaneha:
• Bolumo (Pad 9): Konopo e 'ngoe le e' ngoe e tla laola slider ea molumo bakeng sa pina ea software e tsamaellanang (track 1-32, ho latela hore na ho buloa knob efe le hore na ho khethoa banka efe). Ona ke tšebetso ea kamehla ea likonopo Mokhoeng oa DAW.
• Pan (Pad 10): Konopo e 'ngoe le e' ngoe e tla tsamaisa pina ea software e tsamaellanang (pina 1-32, ho latela hore na ho fetoleloa konofo efe le hore na ho khethiloe banka efe).
• Sesebelisoa (Pad 11): Konopo e 'ngoe le e' ngoe e tla laola lisebelisoa tsa lisebelisoa tsa pina e tsamaisanang ea software (pina 1-32, ho latela hore na ho buloa knob efe le hore na ho khethoa banka efe).
• E romella (Pad 12): Konopo e 'ngoe le e' ngoe e tla laola boemo ba li-aux tse romelloang bakeng sa pina e tsamaisanang ea software (pina 1-32, ho latela hore na ho fetoleloa knob efe le hore na ho khethoa banka efe).

Ho fihlella likhutšoane tsa DAW ka li-Pads

Hlokomela: Ha se liparamente tsohle tse fumanehang ho DAW e ngoe le e ngoe.

• Ho DAW Mode, ho tobetsa pad ho tla romella molaetsa ho molaetsa e le hore o ka qala synth kapa s.ample ho software ea hau. Leha ho le joalo, o ka tšoara Shift ebe o tobetsa Pads 13, 14, 15, kapa 16 ho etsa litaelo tse latelang:
• Boloka (Pad 13): Boloka liphetoho ho tse butsoeng hajoale file ka DAW ea hau.
• Tekanyetso (Letlapa la 14): Hlalosa sebaka sa molumo se khethiloeng hajoale ho DAW ea hau.
• Etsolla (Letlapa la 15): Etsolla phetoho ea ho qetela e entsoeng ho file ka DAW ea hau.
• View (Lethathamo la 16): Fetolela pakeng tsa lifensetere tse fapaneng (mohlala, Mix, kapa Edit) bakeng sa DAW ea hau.

Bohlokoa: E le hore likhutšoane tsena li sebetse le DAW ea hau, PC e hloka ho hlophisoa ho Win (Windows) kapa Mac ho menu ea Oxygen Pro 25's Global Settings. Ho fihlella menu ea Global Settings ho Pontšo, tšoara Shift ebe o tobetsa Konopo ea Mokhoa. Sebelisa Khetha/Scroll Encoder ho lokisa maemo ho latela mofuta oa komporo ea hau, ebe o tobetsa Konopo ea Morao ho tsoa ho menu.

Ho Sebelisa Limmapa tse Tloaelehileng

Oxygen Pro 25 e na le litsamaiso tse ngata tse ka etsoang ka botlalo, 'me ka bokhoni ba ho theha le ho boloka limmapa tsa keyboard, o ka boloka limmapa tse fapaneng bakeng sa li-DAW tse fapaneng, plugins, kapa maemo a ts'ebetso a ka fetoloang hang-hang.

Ha o sebetsa ka Mokhoa o Setang, ho na le lisebelisoa tse 16 tse fumanehang keyboard (1–16). Setha esale pele ke sehlopha sa likabelo tsa MIDI bakeng sa litaolo tsa Oxygen Pro 25 tse ka bolokoang mohopolong oa kahare oa keyboard le ho kengoa hamorao.

Litlhophiso li ka hlophisoa ha keyboard e le ho Preset Edit Mode. Ntle le ho ba le li-presets tsena tse 16 k'homphieutheng, u ka sebelisa software e kenyellelitsoeng ea Editor ho boloka palo e sa lekanyetsoang ea li-presets khomphuteng ea hau le ho fetola tse 16 tse bolokiloeng mohopolong oa kahare oa keyboard.

Ha o sebetsa ka Mokhoa oa DAW, tlhophiso ea Mosebelisi e u lumella ho etsa 'mapa oa tloaelo bakeng sa keyboard o sa kenyelletseng feela melaetsa ea MIDI empa le melaetsa ea Mackie kapa Mackie/HUI. Sena se o lumella ho etsa 'mapa oa li-keyboard ka litaelo tsa DAW ka boeona (joalo ka "Boloka" kapa "Ho homola") ntle le ho etsa 'mapa oa li-keyboard ka likabelo tsa MIDI bakeng sa li-parameter tsa sesebelisoa/plug-in ka har'a DAW. Litlhophiso tsa DAW tsa mosebelisi li ka hlophisoa ha keyboard e kene

Mokhoa oa ho hlophisa oa DAW. Ntle le ho ba le User DAW keyboard, o ka sebelisa software e kenyellelitsoeng ho boloka palo e sa lekanyetsoang ea Li-DAW tsa Basebelisi khomphuteng ea hau le ho fetola hore na ke efe e bolokiloeng mohopolong oa kahare oa keyboard.

Ho kenya Preset Edit Mode, khetha pele ho seta seo u batlang ho se edita (joalo ka ha ho hlalositsoe ho Seta > Ho seta Mokhoa oa Ts'ebetso oa Keyboard). Ebe o tobetsa o hatelle Shift ebe o tobetsa konopo ea DAW/Preset.

Ho kenya DAW Edit Mode, tobetsa o hatelle Shift ebe o tobetsa Konopo ea DAW/Preset.

Ho tsoa ho Mokhoa oa ho hlophisa le ho boloka liphetoho tsa hau, tobetsa konopo ea DAW/Preset (haeba u ne u ntse u hlophisa li-presets) kapa Konopo ea DAW/Preset (haeba u ne u ntse u hlophisa tlhophiso ea DAW ea Mosebelisi).

Haeba u entse liphetoho, skrine ea Pontšo e tla botsa hore na u ka rata ho e boloka. Sebelisa Select/Scroll Encoder ho khetha pakeng tsa Hlakola, Replace, le Save As. Ho khetha Hlakola ho tla u khutlisetsa ho Edit Mode, ha u ntse u khetha Replace ho tla boloka setlhophiso ntle le ho fetola lebitso la sona. Kgetha Boloka E le hore o kgone ho reha lebitso le letjha le ho fetola nomoro ya sebaka se seng se setilwe o sebedisa Kgetha/Scroll Encoder. Haeba o hloka ho hlakola tlhaku ha o ntse o hlophisa lebitso, tobetsa o hatelle Konopo ea Shift le Konopo ea Morao.

Bakeng sa thuso ea ho sebelisa Preset Editor, sheba Tataiso ea Mosebelisi ea Mohlophisi e tlang le software.

Ho Sebelisa Mesebetsi ea ka Hare ea Keyboard

Mesebetsi e latelang ea keyboard e ka sebelisoa ha keyboard e setiloe hore e sebetse ho DAW kapa Preset Mode.

Hlokomela Pheta

Ha karolo ena e kentsoe tšebetsong, Performance Pad efe kapa efe e hatisitsoeng e tla pheta molaetsa oa eona oa Note ka morethetho ka litlhophiso tsa tempo ea hajoale le karohano ea nako. Noutu e 'ngoe le e 'ngoe e phetoang e tla ba bolelele bo khethiloeng bakeng sa tlhophiso ea karohano ea nako. Bakeng sa thuso e eketsehileng ho fetola litlhophiso tsa tempo le karohano ea nako, bona Keyboard Tempo le Karolo ea Nako.

Karolo e pheta-phetoang ea lintlha e ka kengoa tšebetsong nakoana kapa e ka ts'oaroa.

Ho sebelisa pheta-pheta motsotsoana, tobetsa o hatelle Konopo ea Pheta Melaetsa ebe u tobetsa pete. Hafeela u ntse u tšoere Konopo ea Pheta Melaetsa, molaetsa o bapaloang ke pad o tla pheta.

Ho hokela tšobotsi e pheta-phetoang, tšoara Shift ebe o tobetsa Konopo ea Pheta Melaetsa. Ho tobetsa pad efe kapa efe ho tla etsa hore molaetsa oo o o abetsoeng o phete ntle le hore o hatelle Konopo ea Pheta Melaetsa.

Ho tima karolo ea Toggle/Latch, tobetsa konopo ea Pheta ea Hlokomela hape.

Hlokomela: Ha Note Repeat e ntse e sebetsa, Select/Scroll Encoder e ka sebelisoa ho fetola maemo a hajoale a Karolo ea Nako ea Arpeggiator le pad Note Repeat.

Mohlahlobi

Ha arpeggiator e kentsoe, keyboard e tla bapala linotlolo khafetsa ka tatellano. Nako le morethetho oa arpeggiator li ipapisitse le tlhophiso ea karohano ea nako le keyboard kapa tlhophiso ea tempo ea DAW ea hau.

Noutu ka 'ngoe ho arpeggio e tla ba bolelele boo u bo khethileng bakeng sa tlhophiso ea karohano ea nako; bakeng sa mohlalaample, haeba u khetha 1/4, mongolo o mong le o mong ho arpeggio e tla ba kotara. Sheba Keyboard Tempo le Karolo ea Nako bakeng sa thuso ea ho hlophisa litlhophiso tsena.

Arpeggiator e ka sebetsoa ka e 'ngoe ea Mekhoa e' meli:

• Nakoana: arpeggiator e tla bapala lintlha ha feela linotlolo li petelitsoe; ha o lokolla linotlolo, arpeggiator e tla emisa.
• Latch: arpeggiator e tla bapala lintlha ha u hatella linotlolo, 'me e tla tsoela pele ho bapala le ka mor'a hore u lokolle menoana ea hau ho linotlolo.

Ho kenya kapa ho tima arpeggiator, tobetsa Konopo ea Arp/Latch. Ha arpeggiator e kentsoe, konopo ea LED e tla khantša.

Ho kenya tshebetsong latch Mode, tlanya konopo ya Arp/Latch habeli. Ha latch e kentsoe, konopo ea LED e tla benya.

Ho qala arpeggio, tobetsa linotlolo life kapa life ha arpeggiator e ntse e sebetsa.

Ho qala arpeggio e ncha ha e ntse e bapala arpeggio, tobetsa motsoako o mocha oa linotlolo.

Ho kenya lintlha ho arpeggio e latched ha e ntse e bapala, tšoara linotlolo tse tšoanang le tseo u neng u li tobetse pele bakeng sa arpeggio ha u ntse u tobetsa linotlolo bakeng sa lintlha tse ncha tseo u batlang ho li kenya.

Ho hlophisa li-setting tsa arpeggiator, tšoara Shift ebe o tobetsa Konopo ea Arp/Latch. Joale Pontšo e tla kenya menyetla ea ho hlophisa Arpeggiator. Sebelisa Select/Scroll Encoder ho lokisa li-setting (joalokaha ho hlalositsoe ho Display Overview). Ha u qetile ho hlophisa, tobetsa Konopo ea Morao ho tsoa ho Arpeggiator Editing menu.

Ntle le moo, o ka ts'oara Shift kapa oa tobetsa Shift le Bank <ho notlela li-control tsa Shift modifier ARP ha o ntse o fetolela Knobs 1-4 ho hlophisa tse ling empa eseng kaofela. Pontšo e tla bontša litlhophiso tse ncha ha u li fetola.

Hlokomela: Ha Note Repeat e ntse e sebetsa, Select/Scroll Encoder e ka sebelisoa ho fetola maemo a hajoale a Karolo ea Nako ea Arpeggiator le pad Note Repeat.

Keyboard Tempo le Karohano ea Nako

Litlhophiso tsa tempo le karohano ea nako ea Oxygen Pro 25 li khetholla nako le morethetho oa ho pheta-pheta lintlha le likarolo tsa arpeggiator. Ha Clock e setiloe ho ea Hare skrineng sa Tempo Edita Pontšong, tempo ea keyboard e ka kengoa kapa e ka kenngoa hantle ho tsoa skrineng sa Tempo Edita. Ha Clock e setiloe ho ea kantle, tempo ea keyboard e tla ikamahanya le tempo ea DAW ea hau.

Ho tlanya tempo ea keyboard, tlanya Konopo ea Tempo makhetlo a mabeli kapa ho feta ho BPM eo u e batlang. Pontšo e tla nchafatsoa ka tempo e ncha ha u tlanya konopo.

Hlokomela: E le hore u tobetse ho menu ea keyboard, tlhophiso ea Oache ea keyboard ho menu ea Tempo Edita e tlameha ho ba ka Hare. Haeba e setetsoe ho External, tempo ea keyboard e tla lumellana le DAW ea hau.

Ho kenya Tempo Editing menu ho Pontsho, tobetsa o hatelle Konopo ya Tempo. Sebelisa K'houdara ea Khetha/Moqolo ho fetola tlhophiso ea Oache kapa ho kenya tempo ea keyboard ea ka hare (20.0–240.0). Ha u qetile ho hlophisa li-setting, tobetsa konopo

Konopo ea ho Khutlela ho tsoa ho menu ea Tempo Edita. Sheba Pontšo e Felletsengview bakeng sa thuso e eketsehileng mabapi le ho sebelisa Khetha/Scroll Encoder ka mananeo a Display's Edita.

Kgetha Encoder ya ho Scroll and Note Repeta: 1/4–1/32T (Karohano ya Nako): Tobetsa o hatelle Pheta Pheta ebe o bulela Scroll/Select Encoder ho kgetha setting ya karohano ya nako ya keyboard bakeng sa poeletso le ditshebetso tsa arpeggiator.

Mokhoa

Mokhoa oa Chord

Ha o kenya Chord Mode, ho tobetsa konopo e le 'ngoe kapa pad ho tla bapala molumo o feletseng ho e-na le ho tobetsa noto e le 'ngoe feela. Senotlolo kapa pad eo u e tobetsang e tla tseba hore na motso oa chord ke ofe, 'me mofuta oa chord o khethiloeng o tla ipapisa le litlhophiso tsa hajoale.

Karolo ea chord e ka sebetsoa ka ho fetolela Khetha / Scroll Encoder ho e 'ngoe ea Mekhoa e' meli e tla khetholla chord e nepahetseng e abetsoeng senotlolo ka seng:

• Mokhoa oa Smart: Ka Mokhoa ona, o tla qala ka ho beha line ho konopo ea mmino (mohlala, D e nyane). Ebe o fana ka mantsoe a lakatsehang bakeng sa likhetho (ke linako life tse tla kenyelletsoa ho chord, mohlala, 1-3-5). Mantsoe a senotlolo se seng le se seng ka nako eo a tla ntlafatsoa ka kotloloho ho konopo e khethiloeng.
• Tloaelo: Ka Mokhoa ona, o ka tseba sebopeho sa chord se tla abeloa konopo ka 'ngoe ka ho e bapala ka letsoho. Bakeng sa example, haeba u khetha Mokhoa ona, 'me u bapala chord ea 1-b3-5-b7, senotlolo se seng le se seng se tla abeloa ho bapala sebopeho sena sa chord. Noto ea senotlolo seo u se tobetsang e tla sebetsa e le motso oa chord.

Ho kenya tshebetsong kapa ho tima Chord Mode, tobetsa Konopo ya Chord/Sekala. Ha Chord Mode e ntse e kentswe tshebetsong, Konopo ya Chord/Scale e tla kgantsha.

Ho edita li-setting tsa Chord Mode, tšoara pele Shift ha u ntse u tobetsa Konopo ea Chord/Scale ho kenya menu ea Chord Edita Pontšong. Ebe u sebelisa Select/Scroll Encoder ho lokisa litlhophiso (joalo ka ha ho hlalositsoe ho Display Overview). Ha o qetile ho hlophisa, tobetsa Konopo ea Morao ho tsoa ho Chord Edita menu.

Ntle le moo, o ka tshwara Shift ha o ntse o tobetsa dikonopo C2–Bb3 haeba o sebedisa Mokgwa wa Smart chord.

Hlokomela: Ka kamehla, linotlolo li seta ho bapala chords ha Chord Mode e kentsoe tšebetsong. Leha ho le joalo, ho li-setting tsa Global Settings sena se ka fetoloa e le hore ha Chord Mode e sebetsa, li-chords li tla bapala linotlolong kapa lipaketeng kapa ka bobeli.

Scale Mode

Ka Scale Mode, o ka seta keybed hore linotlolo tse kantle ho linoto tsa sekala se khethiloeng sa 'mino li koaloe. Sena se o lumella ho bapala ka har'a sekala se khethiloeng ntle le kotsi ea ho bapala lintlha tse "fosahetseng". O ka khetha ho tsoa likhethong tse 16 tse fapaneng ha o abela sekala ho keyboard.

Ho kenya tshebetsong kapa ho tima Scale Mode, tlanya habedi Konopo ya Chord/Scale. Ha Scale Mode e ntse e sebetsa, Konopo ea Chord/Scale e tla benya.

Ho fumana hore na keybed e setetswe ho selekanyo sefe sa mmino, kenya menu ya Chord/Scale Edit ho Pontsho ka ho tshwara Shift le ho tobetsa Konopo ya Chord/Scale. Ebe u sebelisa Select/Scroll Encoder ho lokisa litlhophiso (joalo ka ha ho hlalositsoe ho Display Overview). Ha o qetile ho hlophisa, tobetsa Konopo ea Morao ho tsoa ho menu ea Scale Edit.

Menu ea Litlhophiso tsa Lefatše

Sebelisa Menu ea Litlhophiso tsa Lefatše Pontšo ho etsa tse ling tsa litaolo tsa kamehla tsa keyboard. Litlhophiso tsena li sebetsa ho keyboard ka bobeli DAW le Mode ea ho Preset, 'me liphetoho leha e le life tse entsoeng ho Global Settings Menu li tla bolokoa ka mor'a hore keyboard e tingoe.

Ho kenya Global Settings Menu, tshwara Shift ebe o tobetsa Konopo ya Mokgwa. Sebelisa Select/Scroll Encoder ho lokisa li-setting (joalokaha ho hlalositsoe ho Display Overview).

Ho tsoa ho Global Settings Menu, tobetsa Konopo ea Morao.

DAW le Lethathamo le Hlophisitsoeng Pele

Lethathamo le Hlophisitsoeng Pele

1. MPC Pl (MPC Plugin)	9. Hlophisa esale pele
2. Hybrid (Hybrid 3)	10. Seta esale pele
3. MiniGrd (MiniGrand)	11. Seta esale pele
4. Velvet	12. Seta esale pele
5. Xpand (Xpand!2)	13. Seta esale pele
6. Phula	14. Seta esale pele
7. Boom	15. Seta esale pele
8. DB33	16. Seta esale pele

Lethathamo la DAW

1. Lisebelisoa tsa Pro	7. Maikutlo
2. MPC (MPC Beats)	8. Bitwig
3. Ableton (Ableton Live)	9. Karache (Sehlopha sa Karache)
4. Studio One	10. Mokotuli
5. Lebaka	11. FL St. (FL Studio)
6. Cubase	12. Mosebelisi DAW

Litlhaloso tsa Tekheniki

Matla	E tsamaisoa ke bese ea USB
Litekanyo (Bolelele x bophara x, x Bophahamo)	10.4" x 19.3" x 3.3" 264.1 x 490.2 x 83.3 limilimithara
Boima ba 'mele	5.4 lik'hilograma 2.46 lik'hilograma

Litlhaloso li ka fetoha ntle le tsebiso.

Matshwao a kgwebo le Dilaesense

M-Audio ke lets'oao la khoebo la inMusic Brands, Inc., e ngolisitsoeng US le linaheng tse ling.

AAX, Avid, le Pro Tools ke matshwao a kgwebo a ngodisitsweng a Avid Technology, Inc. naheng ya US le dinaheng tse ding.

Ableton ke lets'oao la khoebo la Ableton AG.

Apple Store, macOS, Macintosh, le iPad ke matšoao a khoebo a Apple Inc., a ngolisitsoeng USn le linaheng tse ling.

Windows ke letšoao la khoebo le ngolisitsoeng la Microsoft Corporation United States le linaheng tse ling.

Kensington ke lets'oao la khoebo le ngolisitsoeng la ACCO Brands.

Mabitso a mang kaofela a lihlahisoa kapa a khampani ke matšoao a khoebo kapa matšoao a ngolisitsoeng a beng ba ona.

Tšehetso

Bakeng sa tlhaiso-leseling ea morao-rao mabapi le sehlahisoa sena (litlhoko tsa sistimi, tlhaiso-leseling ea ho lumellana, joalo-joalo) le ngoliso ea sehlahisoa, etela m-audio.com.

Bakeng sa tšehetso e eketsehileng ea sehlahisoa, etela m-audio.com/support.

Ikopanye

• m-audio.com

LBH

• P: Nka fumana tšehetso e eketsehileng hokae bakeng sa Oxygen Pro ea ka 25?
  • A: Bakeng sa thuso e eketsehileng le tšehetso ea lihlahisoa, etela m-audio.com/support.

Litokomane / Lisebelisoa

M-AUDIO Oxygen Pro 25 USB MIDI Keyboard Controller [pdf] Bukana ea Mosebelisi Oxygen Pro 25, Oxygen Pro 25 USB MIDI Keyboard Controller, USB MIDI Keyboard Controller, MIDI Keyboard Controller, Keyboard Controller, Controller

Litšupiso

• Bukana ea Mosebelisi