LYNX LUKA Series Digital Signal processors

Litlhaloso

• Lebitso la Sehlahisoa: LUKA letoto
• Moetsi: Lynx Pro Audio SL
• Setifikeiti sa CE: Sehlahisoa sa Europe
• Litekanyo: Sheba bukana ea mosebelisi
• E ntlafalitsoe ebile e entsoe ho European Union

Ikopanye feela le moloko o mocha oa li-processor tsa dijithale LUKA, tse entsoeng le ho etsoa ke Lynx Pro Audio SL
Pele o sebetsa le processor re khothaletsa hore o bale bukana ena, maqepheng a eona, u tla fumana litaelo tsa tšebeliso, programming ex.ample keletso e sebetsang e tla thusa haholo.
Bakeng sa ntlafatso e kholo ea sistimi efe kapa efe ea molumo, ho hlokahala processor ea boemo ba pele ea dijithale e nang le likhetho tse fapaneng tsa ts'ebetso. Li-processor tsena li fetoha sesebelisoa se sebetsang sa boleng bo boholo, se fa mosebelisi tharollo e ntle ka ho fetisisa 'marakeng ka boemo bo phahameng ka ho fetisisa ba ho nepahala le likarolo tse ngata bakeng sa setsebi.
Re tšepa hore joaloka mosebedisi u tla khotsofala ka ho feletseng. Re na le bonnete ba hore processor ea LUKA e tla fihlela litebello tsa hau mme e u nolofalletse ho fumana molemo o moholo ho sistimi ea hau.

BOHLOKOA POLOKETSO LITAELO

Letšoao la CE la processor ea LUKA le bonts'a hore e netefalitsoe le ho lekoa ho fihlela Melao ea Europe le Litloaelo tsa Machabeng mabapi le Tšebelisano ea Motlakase le Ts'ireletso ea Motlakase.

Radiated Emissions : EN55013-1 (1996)
Tšireletso ea RF: EN55103-2 (1996)
Tšireletseho ea Motlakase: EN60065 (1993) IEC65 (1985) le ntlafatso ea 1, 2 le 3

• Sehlahisoa sena se boetse se kopana le litlhaloso tsa litaelo tse latelang tsa polokeho: Voltage Taelo ea 73/23/EEC EMC Directive 89/336/EEC
• Sehlahisoa se Hlahisitsoe 'me se Hlahisitsoe ho European Union.

TLHOKOMELISO KOTSI EA HO TSHOSOA KE MOTLOTLO E SE KE EA BULELA

Matšoao a bontšitsoeng ka holimo ke matšoao a amohelehang lefatšeng ka bophara a lemosang ka likotsi tse ka bang teng ka lihlahisoa tsa motlakase. Ho benya ha lehalima ka ntlha ea motsu ho khutlotharo e lekanang ho bolela hore ho na le matla a kotsitage teng ka har'a yuniti. Lekhalo la khutlotharo e lekanang le le leng le bontša hore hoa hlokahala hore mosebelisi a bue ka bukana ea mong'a eona.
Tlhokomeliso :

• Se ke oa pepesa processor ho mongobo le lerōle.
• U se ke ua tlosa sekoahelo se ka holimo.
• U se ke ua sebetsana le likarolo tse ka hare ho qoba ho tsosoa ke motlakase.
• Sebelisa lithapo tsa motlakase feela maemong a matle.

Ho manolla LUKA

Pele o notlolla processor ea hau e ncha, etsa bonnete ba hore lebokose ha le bonts'e tšenyo kapa deformation. Haeba sena se etsahala, ka kopo kopa ts'enyehelo ho morekisi oa hau. Hang ha e sa phutholoha 'me e netefalitse ts'ebetso ea eona e nepahetseng, boloka lebokose la pele haeba u hloka ho le khutlisetsa ho mofani oa hau.

Selelekela

• Letoto la LUKA le fa mosebelisi sesebelisoa se phethahetseng sa ho sebetsa, se nang le mefuta e meraro ea li-processor tse fumanehang ka likenyelletso tse peli kapa tse 'ne le liphetho tse nne, s, tse tšeletseng kapa tse robeli (analog kapa digital).
• Li-processor tsa LUKA li fana ka Double Dynamic, e nang le compressor/limiter. The limiter e lokisa boemo ba molumo oa transducer, ho boloka matla a pele le ho hlompha phetoho ea pele, e leng se hlahisang ts'ebetso e ntle ea acoustic. E boetse e sireletsa khahlanong le tšenyo le ho fokotsa ho khopama ho bakoang ke ho etela ho feta tekano. Sistimi ena ea Double-dynamic e fokotsa maemo a khopamiso mme e fana ka tšireletso bakeng sa likarolo tsohle tsa acoustic le elektroniki tsa sistimi. Peak limiter e laola motsamao o moholo oa sebui, ho se sireletsa khahlanong le tšenyo ka ho fokotsa ho khopama ho bakoang ke ho tsamaea ho feta tekano.
• Mefuta eohle ea LUKA e tla e na le li-converter tsa boleng bo holimo tsa AD/DA, tse netefatsang botšepehi bo botle ba molumo. Sena se tiisa hore molumo o lula o nepahetse ebile o hlakile, o fihlela litlhoko tsa litsebi tsa molumo.
• Taba e makatsang mabapi le Letoto la LUKA ke mokhoa oa eona oa ho tsamaisa le ho tsamaisa mats'oao a molumo, e lumellang hore mats'oao a fetisoe lipakeng tsa mehloli le libaka tse fapaneng. Ha e le hantle, matrix ea molumo ke switcher e u nolofalletsang ho romella matshwao a medumo ho tloha ho tse ngata ho ea ho liphetho tse ngata. E ka thusa ho laola litlhophiso tse rarahaneng tsa molumo, joalo ka ho tsamaisa matšoao ho libui tse fapaneng, li-monitor kapa lisebelisoa tsa ho rekota, ka taolo e kholo le bonolo.
• Ntle le moo, Letoto la LUKA le na le lisebelisoa tse ngata tsa "backup", tse u lumellang hore u be le likenyelletso tse 'maloa,' me u behe e le 'ngoe pele ka nako efe kapa efe, ho netefatsa hore ketsahalo e tsoela pele ntle le litšitiso.
• Karolong ea ts'ireletso, maemo a fapaneng a lithibelo tsa phihlello a kenyelelitsoe. Seo se ka laoloa ke password, ka khetho ea ho khetha hore na ke mesebetsi efe ea ts'ebetso e ka fetoloang kapa che. Phanele e ka pele le eona e ka thibeloa, ea hana phihlello efe kapa efe.
  Software ea OCS e etselitsoe ho fa mosebelisi phihlello e potlakileng le e hlakileng sebakeng se seng le se seng sa ts'ebetso, ho thusa ho hlophisa processor ho tsoa komporong. Software ea selemo le selemo ke tokomane e fumanehang karolong ea downloads ea rona websebaka www.lynxproaudio.com.

Tlhaloso ea LUKA

Letoto la LUKA ke processor ea molumo e feto-fetohang e etselitsoeng tšebeliso ea litsebi. E fana ka mefuta e mengata ea likarolo bakeng sa ts'ebetso ea lets'oao la molumo.

Tlhaloso ea karolo e ka pele ea LUKA:
Phanele e ka pele e kenyelletsa litsamaiso tse fapaneng joalo ka likonopo le li-encoder bakeng sa ho sebetsa sesebelisoa.

1. PHEBELO MATLA
   LED e bonts'a hore processor e fumana matla mme e butsoe.
2. IPS BONTŠA MALA
   Pontšo ena e u lumella ho hlahisa mefuta e fapaneng ea tlhahisoleseling ka mokhoa o hlakileng le o nepahetseng
3. TSAMAISO THABO
   Joystick ho tsamaisetsa hara dimenu, le netefatso kapa ho hlakolwa ha diparamente.
4. PONTSHO, MELAELO LE CLIP E ELETA
   Li-signal, limitation, le li-clip LEDs ke li-light-emitting diode tse nyane tse sebelisetsoang ho fana ka pono.
   tlhahisoleseding mabapi le boemo ba letshwao.
5. KHOTSOA LILUMELA / HLOLA
   Bakeng sa likarolo tsa ho hlophisa, ts'ebetso ena e u lumella ho khetha mokhoa o lakatsehang oa ho hlophisa. E ka khona hape
   sebedisoa ho kgutsisa modumo ka kotloloho.
6. USB
   Khokelo ea USB ho tloha ka pele ho seta liparamente tsa OCS software.
7. LIEKETSENG TS'IANE
   Digital AES3: E na le likhokahano tsa basali tsa XLR, sistimi ena ea audio ea morao-rao ea morao-rao e tšehetsa qeto ea ho fihla ho li-bits tse 24 le joalo ka.ampSekhahla sa ling sa 192 kHz, se netefatsa boleng bo ikhethang ba molumo.
8. LITLHAKISO TSA AUDIO
   Ho itšetlehile ka khetho:
   Analog: Sistimi ena e sebelisa lihokelo tsa basali tsa XLR ho amohela matshwao a mamelwang a leka-lekaneng, ho netefatsa hore modumo o hlwekile ebile o sena lerata.
   Dijithale AES3: E na le likhokahano tsa basali tsa XLR, sistimi ena ea audio ea morao-rao ea morao-rao e tšehetsa qeto ea li-bits tse 24 le joalo kaamplebelo la khanya ke 192 kHz,
9. LITŠOANTŠISO TSA MAU
   Analog: Letšoao le leka-lekaneng ka lihokelo tsa banna tsa XLR.
10. ETHERNET MOKHOPI
    Lihokelo tsa Ethercon RJ45 li fana ka khotso ea kelello e tlisoang ke khokahanyo e sireletsehileng le e ka tšeptjoang, e u lumellang hore u tsepamise maikutlo ho boqapi ba hau ntle le ho tšoenyeha ka ho theoha ha matšoao kapa ho hloleha ha lisebelisoa.
11. MATLA TS'OANE
12. IEC MOHLOMOLA MATLA
    Thapo ea matla e fanoa hammoho le processor. LUKA e kenyelletsa phepelo e nepahetseng ea motlakase. E mamella phepelo ea motlakase ho tloha ho 85 ho isa ho 240 volts mme e lula e ikemela e fana ka ts'ebetso e phethahetseng leha e na le matla a sa laoloang hantle.tages.
13. FUSE MOHAPI
    Fuse ea 1A ke sesebelisoa sa polokeho se sirelletsang lipotoloho tsa motlakase hore li se ke tsa chesa haholo le hore ho ka ba le tšenyo ea mollo. Kamehla nkela sebaka ka li-fuse tse lekanang.

Tlhaloso ea karolo e ka morao ea LUKA:
Karolo e ka morao e na le likhokahano tsa ho seta le ho hokela sesebelisoa ho lisebelisoa tse ling tsa molumo.

Hlophisa le ho hokahanya

Lihokelo le likhokahano:
Sheba bukana ea mosebelisi bakeng sa tlhaiso-leseling e felletseng mabapi le lihokelo le mokhoa oa ho etsa likhokahano.

LIKHOKELETSO TSA SOCKET XLR

LIHLOOHO TSA XLR LIKHOKANE

LUKA litekanyo:
Sheba bukana ea mosebelisi bakeng sa litekanyo tse khethehileng tsa sehlahisoa.

Tlhaloso ea Ts'ebetso

• Setšoantšo sa ts'ebetso ea LUKA
  Li-DSP (Digital Signal processors) tse nang le li-bits tse 64 tsa tharollo ea kahare li kenyellelitsoe ho processor ea LUKA. Matla ana kaofela a ho bala a sebelisoa ho li-algorithms tsa ts'ebetso ea mats'oao a laolang ts'ebetso eohle: tieho ea ho kenya letsoho, tekano ea lefats'e, li-filters tsa crossover, tekano ea motho ka mong bakeng sa mokhoa o mong le o mong, tieho ea tlhahiso, ts'ireletso le taolo e matla. Kaofela ha dikgatotharabololo tsena ba 'nile ba ntshetswa pele ho fana ka molemo ka ho fetisisa ho nepahala le ho
  lerata le chitja le tlase haholo dipalong.
• Ka tsela ena, botšepehi bo botle ka ho fetisisa ba molumo le ponaletso e se nang lerata lia finyelloa. Sebaka se pharaletseng sa ka hare (64 bit) se lumella tšebeliso ea li-filters tse nepahetseng tse phahameng ka ho sotha ho tlaase haholo. Li-converter tsa 32-bit le 121 dB dynamic range li netefatsa molumo o hloekileng ntle le ho sotha le lerata le ka morao li etsa hore LUKA e be e 'ngoe ea li-processor tse' marakeng tse nang le litšobotsi tse ntle ka ho fetisisa tsa tekheniki.
• Setšoantšo sa tšebetso ka har'a LUKA DSP ke se latelang

FUMANA:
Ho fetola phaello ho li-inputs ho u lumella ho ikamahanya le maemo kapa ho lumellana le boemo ba pontšo bo tsoang ho mixing console. Ka mokhoa o ts'oanang, ho fetola phaello ho liphetho ho u lumella ho laola boemo bo rometsoeng ho e 'ngoe le e 'ngoe ampmatlafatso le ho lekanya kutlo ka mahlakore ka bobeli.

PEQ:
LUKA e fana ka mefuta e mengata ea khetho ea Q, e nolofalletsang tlhophiso e ntle ka ho fetisisa ea matšoao.

tieho:
Ho lieha ho ka lokisoang. Ka lintho tse kenang le tse hlahisoang ho fihla ho 206 msec. Bakeng sa ho koahela sebaka sa ho fihla ho 70 m. E bohlokoa haholo ha o sebetsa ka lisebelisoa tsa bohlokoa tsa PA tse koahelang sebaka se seholo se nang le li-blocs tse matlafatsang hole haholo le s.tage. Ka lebaka la ts'ebetso eo, hoa khoneha ho lokisa boemo ba khabinete (ho lumellana) ka thepa ea mekhoa e mengata le ho qoba ho hlakola mathata ka lebaka la liphello tsa ho tlosoa ha mekhahlelo.

Sefapano:
Lisefe tsa Crossover tse nang le likheo tse phahameng le tse tlase tsa Linkwitz Riley, Bessel, le Band Butterworth ho fihla matsoapong a 48 dB/oct ka mehato e 6 dB lia fumaneha. Moepa oa 6 dB / octave, mohlala, o tsamaellanang le filthara ea taelo ea pele, o lumella ho shading khafetsa.

TLHOKOMELISO:

LUKA e ithorisa ka sethibelo sa kompressor sa RMS se tsoetseng pele se hlahisoang ka seng. Li-limiter le li-compressor tsena li sebelisa theknoloji ea CRI (Continuous Increment Ratio) ho fokotsa ho khopama.

Phanele e ka pele ea LUKA e fana ka sesupo sa pono ea ho fokotsa ka LED LIMIT. LED ena e bonesa ha lets'oao le feta moeli o hlalositsoeng ke mosebelisi, o ka fetoloang ka har'a tlhophiso ea lefats'e ea processor.

Khatello ea boleng bo holimo e netefatsa phetoho e bonolo le butle-butle ho fokotsa, ho boloka ho hlaka ha molumo ka linako tsohle. Sena se felisa bohale bo atisang ho amahanngoa le meeli e tloaelehileng.

Thibela litšoantšo:
Buka ea mosebelisi e fana ka litšoantšo tsa block ho thusa ho utloisisa mesebetsi ea ka hare ea letoto la LUKA.

Litaelo tsa Ts'ebetso

Mokhoa oa ho tsoela pele

Pele o kenya processor:
LUKA e kenyelletsa phepelo e nepahetseng ea motlakase. Seo se bolela hore e khona ho ikamahanya le maemo leha e le afe a ho kenya letsohotage ho tloha ho 85 le 240 volts le maqhubu ho tloha 40 ho ea ho 400 Hz. Ke ka lebaka lena processor e netefalitsoeng hore e tla sebetsa ka mokhoa o phethahetseng tlasa voltage le boleng ba ho qetela ba molumo bo ikemetse ka ho feletseng ho phano ea voltage kapa mofuta wa jenereithara e sebedisoang. Leha ho le joalo, e kgothaletswa ho hlahloba phepelo voltage pele o sebetsa ho qoba bothata bofe kapa bofe bo ka bang teng ha o hokela ho 380 volts. Sets'oants'o sa fuse se kenyelelitsoe ho processor ea LUKA e nang le fuse ea spare (1 A) e lutseng ho sehokelo sa IEC sa sehokelo sa phepelo ea motlakase. Ho kgothaletswa ho tima molumo oa matla ohle amplifiers ho ea ho 0 pele o bulela processor. Ka mor'a moo re tla khona ho lekola hore na liphetho tsa processor li hokahane le likhabinete tsa tsona tse tsamaellanang tsa motlakase, ho qoba tšenyo e ke keng ea thijoa ho libuela-hole (haholo-holo ho bakhanni ba theko e phahameng ba maqhubu a phahameng). Ha ho kenngoa leha e le efe, ho loketse ho beha lisebelisoa tsa molumo le mabone ka melapo e ikemetseng ea matla ho sireletsa likarolo tse peli ka thoko le ho qoba ho kena-kenana pakeng tsa lisebelisoa tse fapaneng.

Hang ha processor e BUTSE:
Ha o bulela processor ea LUKA, liphetho tsa molumo li lula li le khuts'oane fatše ka metsotsoana e seng mekae ho qoba nako e kotsi ea ho qala ea nakoana e hlokahalang bakeng sa processor ho.
Amohela voltage le ho hlahloba mesebetsi ea ka hare e kang ho sebetsa hantle ha li-converter, ho hlahloba mohopolo o sebetsang, ho qala ha li-processor tsa DSP, le ho kenya litlhophiso tsa hona joale. Ka mor'a moo, haeba ntho e 'ngoe le e' ngoe e nepahetse, liphetho tsohle li tla tsamaea ka nako e le 'ngoe ho hlahisa molumo ho sehlahisoa se seng le se seng.

Pontsho, dikonopo, le dikhouto:
Li-processor tsa LUKA li tla, bakeng sa ho hlophisa mesebetsi eohle, ka pontšo ea mebala ea IPS, hammoho le letoto la li-joystick tsa ho tsamaea le li-encoder bakeng sa phetoho ea nako ea sebele ea li-parameter tse fapaneng. Leha o khona ho fetola paramethara efe kapa efe, ho khothaletsoa ho sebelisa software ea OCS ho ntlafatsa viewing ea li-curve tsa EQ le boiketlo ba ho etsa mananeo.

Tlhaloso ea semumu/edit:
Likonopo tsena li ka khutsisa lintho tse kenang kapa tse hlahisoang, ho latela mohlala. Lintho tse kentsoeng kapa tse koetsoeng li tla khantša ka bofubelu nako le nako. Haeba re kentse ho edit menu, likonopo tsena tsa push li tla re thusa ho khetha tlhahiso kapa tlhahiso bakeng sa ho hlophisa. Kenyelletso kapa tlhahiso ea tlhahiso e tla panya ka bofubelu.

Tlhaloso ea likonopo tsa ho tsamaea:
Utloisisa mesebetsi ea likonopo tsa ho tsamaea bakeng sa ho tsamaea habonolo ho menu.

Phanele ea tlhophiso:

Mochine oa LUKA o na le pontšo ea mebala ea IPS. Pontšo ena ea boleng bo phahameng e fana ka ho hlaka view ea menyetla e fapaneng ea ho hlophisa mesebetsi ea processor joalo ka ho hlophisa, file, kapa litlhophiso. Ho skrine se seholo, u ka bona tlhahiso le tlhahiso ea processor.

• Kenyeletso:
  U ka bona metara ea VU e nang le boemo ba ho kenya le lets'oao la clipliplip, ts'ebetso e sa bueng, le phetoho ea polarity.
• Sephetho:
  U na le metara ea VU e bonts'ang boemo ba tlhahiso. U ka hlahloba compressor, laola ts'ebetso e matla, 'me u khethe khetho ea semumu, le polarity inversion.
• Ka phanele ea ponts'o ea processor, u tla fumana sebaka sa taolo ea dijithale.
• O ka hlophisa lits'ebetso tsa tokiso ea Motheo. Khetha feela litšoantšo tse skrineng.
• Skrine sena se u lumella ho hlophisa tlhahiso ea hau ea XLR. O ka khetha mocha o batloang oa ho kenya ebe o khetha pakeng tsa mokhoa oa Analog le ho beha boemo ba Threshold.
• Skrine sena se u lumella ho hlophisa matrix a processor ea hau ea molumo. Khetha boemo ba ho rarahana bo u loketseng hantle: Bo bonolo, bo Motheo, kapa bo Hatelletse.
  Boemong ba mantlha, o ka khetha 1, 2, 3, 4,1, 2+3, kapa 4+XNUMX.
• Skrine ea ho hlophisa e u lumella ho lokisa likhetho tsa mantlha tsa tlhophiso.
• Skrine ea ho hlophisa e u lumella ho lokisa likhetho tse tsoetseng pele tsa tlhophiso ea Matrix. Joale o ka hlophisa matrix ka li-parameter tse khethehileng.
• Ka skrine ena, u ka khona view boemo ba hona joale ba phaello le ho lokisa litlhophiso tse fapaneng tsa processor ea LUKA.
  • Letšoao lena le bolela hore semumu se lumelletsoe.
  • Letšoao lena le nolofalletsa polarity inversion.
• Ka skrine ena, u ka khona view nako ea ho lieha ha processor ea molumo le ho fihlella likhetho tsa eona tse fapaneng tsa tlhophiso.
• Skrine sena se u lumella ho bula snapshot preset. Skrine sena se u lumella ho bula snapshot preset.
• Skrine ea ho hlophisa e u lumella ho khetha mehopolong ea hau e bolokiloeng ea mosebelisi bakeng sa mokhoa o mong le o mong oa ho kenya.
• Skrine sa ho qetela sephuthelong sena se u lumella ho kenya litlhophiso tsa sebuela-pele sa hau. U ka khetha profil ea molumo e seng e setiloe, 'me u fetole mokhoa oo. U na le khetho ea ho seta seta esale pele.
• Litlhophiso - AMP Seta e bontša phaello ea amplifier e hokahantsoeng le tlhahiso e amanang. Sena se o nolofalletsa ho fetola litlhophiso tse matla ho tse hokahaneng ampmoqhobi.
• Ho skrine sa li-setting, u ka boela ua lokisa skrine saver.
• Skrine sena ke ho lokisa Ethernet. O ka khetha othomathiki kapa oa letsoho.
• Konopo "Hlakola lihlopha" e tla hlakola lihlopha tsohle tsa taolo tse bolokiloeng ho processor. Skrine e u lumella ho tsosolosa litlhophiso tsa fektheri.
• Skrine ea ho qetela e u bontša lintlha tse akaretsang mabapi le likarolo tsa processor.
  • Mona o ka bona mofuta oa processor, nomoro ea eona ea serial, firmware ea DSP, le liphetolelo tsa Hardware.

*Ha o chencha likanale tsa processor ha o le ho li-skrini tsa ho hlophisa, likonopo tsa 'Mute' lia benya ho bontša hore mocha o ntse o hlophisoa. Ho feta moo, likonopo tsena li u lumella ho chencha likanale. Boitšoaro bona bo sebetsa ho menyetla eohle e lumellang hore ho fetoloe litlhophiso bakeng sa likanale tse fapaneng.

LIEKETSENG MOKHOPO

Kakaretso		Matla a matla: 85-240 V ~ 40-400 Hz. Sehokelo sa IEC (Switching power supply, wide range) Tšebeliso: 20 W. Thempereichara ea ho sebetsa: -5º ho isa ho 60º C (23º ho isa ho 140º F) Mocheso oa polokelo: -60º ho isa ho 75º C (-76º ho isa ho 167º F) Mongobo: Max. 90% e sa fokotseng Litekanyo: 483 x 45 x 200 mm Boima ba 'mele: 3 Kg	Pele Phanele	Pontsho: IPS 320 x 170 mmala + joystick encoder + ho fihla ho likonopo tse 12 bakeng sa Edition le Mute, tse nang le matšoao a khanya.   Metara ea boemo: - Kenyelletso: Letšoao la LED + Over Limit - Sephetho: Letšoao la LED + Compression
Kenyeletso		2 kapa 4 analogic + digital AES3 2 kanale Tšitiso: 10 K Ohm E leka-lekane (5 K Ohm e sa leka-lekanang) Sehokelo: E leka-lekaneng XLR (pin 2 +) AD converter: 32 bit-768KHz Sigma-Delta, 512x Oversampling. Matla a Matla: 121 dB Max. boemo: +24 dBu Digital AES3: Likanale tse 2 ho fihla ho li-bits tse 24 192 KHz	Sephetho	4 / 6 / 8 Tšitiso: 200 K Ohm E Balanced (100 K Ohm e sa leka-lekanang) Sehokelo: E leka-lekaneng XLR (pin 2 +) converter ea DA; 32 bit-768KHz Dynamic Range: 120 dB Max. boemo: +24 dBu (e leka-lekaneng)
Puisano		USB le Ethernet	Ho lieha ho fihla	1.17 ms
Audio		Maqhubu a Marang-rang: 10 Hz - 24 KHz. Ts'ebetso ea DSP: Qeto ea ka hare e nang le 64-bit e nepahetseng habeli (48 KHz) Bafetoleli: qeto ea 32-bit Ho lieha ha Phatlalatso: 1.17 milliseconds	Ho lekana	User EQ: High-Pass1 + 10 Parametric2 Mode EQ: High-Pass / Low-Pass1 + 10 Parametric2   Ho tsoa EQ: High-Pass / Low-Pass1 + 12 Parametric2 + Tloaelo ea FIR (Boholo bo fapaneng le Mokhahlelo). Tlanya File (tselisa kantle FIR) ho fihla ho lipompo tse 1000.     Li-filters tsa mofuta oa PEQ2: Parametric, Shelving High, Shelving Low, Low-Pass, High-Pass, Low-Pass Q e feto-fetohang, phapang ea High-Pass Q, BandPass, Reject Band, AllPass order 1, AllPass order 2.
Kenyelletso ea matrix		Input Routing matrix Analog/AES3 Lisebelisuoa tsa bekapo tse lokisehang
Crossover 1		Linkwitz Riley ka 12, 24, 48 dB/oct. Butterworth le Bessel ba nang le 6, 12, 18, 24, 30, 36, 42 le 48 dB/oct.	tieho	Kenyeletso/sephetho: ho fihla ho 206 ms (70 m)

 

HO BATLE PHOSO

Re ikemiselitse ho rarolla mathata a ka bang teng ka ho fana ka tharollo karolong ena:

1. Processor ha e qala
   Sheba thapo ea phepelo ea motlakase. Haeba e hokahane ka nepo 'me LED e khubelu ka phanele e ka pele e sa bonese, hlahloba fuse e lutseng moo thapo ea motlakase e kenang teng.
2. The processor e qala empa ha ho na molumo.
   Etsa bonnete ba hore processor e fuoa lets'oao ka mokhoa o nepahetseng, A, B, C, kapa D. Haeba lets'oao le fihla ho processor, lets'oao le letala la LED le tla bonesa.
3. Molumo o hlahang o "makatsa"
   Check that the outputs and their corresponding cabinets are correctly linked. Always be careful to increasing little by little the cabinet’s volume channel by channel to check the correct connection and not damage the transducers.
4. E 'ngoe ea likhabinete (e nang le lets'oao le ts'oanang) e utloahala e le tlase ho feta tse ling
   Lekola hore thapo e kopanyang ho tloha ho processor ho ea khabinete e leka-lekana hantle ho seng joalo lets'oao la tlhahiso le tla oela 6 dB. The molumo e utloahala e fosahetse ebile e sothehile.
5. Netefatsa hore ha re kenye letsoho (ka ntle ho 24dBu). Tabeng ena, li-LED li khantša sekotwana se sefubelu. Ho lekane ho fokotsa lets'oao le kenang ho processor, ho fihlela ho se na li-clip tsa LED tse khantšang. Haeba sena se sa sebetse, netefatsa hore lets'oao ha le sothehe ho tsoa ho gear e fetileng, mohlalaample, mixer, eo e ka bang phaello ea kanale eo e phahameng haholo mme e khotsofatsa tlhahiso ea motsoako.
6. Likonopo tse khouto ha li sebetse.k
   Netefatsa haeba ho na le senotlolo sa keyboard se kentsoeng ho tsoa ho software.
7. Ha ke khone ho hokela ho Ether.net.
   Sheba hore thapo ea USB ha e ea hokahanngoa, e na le lintho tse tlang pele 'me ka hare e tima khokahanyo ea Ethernet. Haeba ho se joalo, hlahloba khokahano ea Ethernet.

• Lihlahisoa tsa Lynx li netefalitsoe khahlano le mofuta o mong le o mong oa tlhahiso ea lilemo tse fosahetseng ka mor'a letsatsi la thekiso. Ha lihlahisoa li le tlas'a tiisetso, litokiso le phepelo ea mahala ea likarolo tsa sesebelisoa ho lokisa mofuta ofe kapa ofe oa sekoli li tiisitsoe ke Lynx Pro Audio SL Tabeng ea hore sehlahisoa se ke ke sa khutlisetsoa fekthering bakeng sa ho hlahlojoa le ho lokisoa, Lynx Pro Audio SL e ne e tla fana ka likarolo tsohle tse hlokahalang.
• Lynx Pro Audio SL ha e ikarabelle bakeng sa tšenyo leha e le efe kapa phoso e bakiloeng nakong ea lipalangoang kapa e bakoang ke ho tšoaroa ka tsela e sa lokelang kapa e sa lokelang ke motho ea sa lumelloeng nakong ea bophelo ba tiiso ena.
• Lihlahisoa tsohle tsa rona li feta litekong tse matla le taolo ea boleng. Re netefatsa litšoaneleho tse hlalositsoeng mona le boleng ba tsona khahlano le phoso efe kapa efe ea ho etsa lintho.
• Mosebelisi o lahleheloa ke litokelo tsohle tsa tiisetso haeba a kenyelletsa kapa a etsa phetoho leha e le efe ho sehlahisoa haeba a se sebelisa ka ntle ho meroalo e bolokehileng ea ts'ebetso e boletsoeng, kapa a sa sireletse tsamaiso hantle ka ho sebelisa lithapo tsohle tsa masoba a tsona.
• Bakeng sa potso efe kapa efe mabapi le sehlahisoa, mosebelisi o tlameha ho qotsa mohlala le nomoro ea serial.
• Phatlalatso ea WEEE: Thepa ea motlakase le ea elektroniki e tlameha ho lahloa ka thoko ho litšila tse tloaelehileng qetellong ea nako ea ho sebetsa ha eona. Ka kopo, lahla sehlahisoa sena ho latela melaoana ea naha kapa litumellano tsa konteraka. Haeba ho na le lipotso tse ling mabapi le ho lahloa ha sehlahisoa sena ka kopo ikopanye le Lynx Pro Audio SL

PHALALATSO TUMELO

• Moqolo o tlasetage Directive 2006/95/EC
• Tšebelisano ea Motlakase 2004/108/EC
• Taelo ea EMC RoHS 2002/95/EC

Ka Harmonized European Norms:

• EA-60065-EN
  2002 Audio, video, le lisebelisoa tse tšoanang tsa elektroniki. Litlhoko tsa polokeho
• EN 55103-1:
  1996 Tšebelisano ea motlakase. Tekanyetso ea lelapa ea sehlahisoa bakeng sa lisebelisoa tsa mabone a molumo, video, audiovisual,l le boithabiso bakeng sa ts'ebeliso ea litsebi. Karolo ea 1: Ho tsoa.
• EN 55103-2:
  1996 Tšebelisano ea motlakase. Tekanyetso ea lelapa ea sehlahisoa bakeng sa lisebelisoa tsa taolo ea mabone a molumo, video, audiovisual le boithabiso bakeng sa ts'ebeliso ea litsebi. Karolo ea 2: Ho itšireletsa mafung.

FAQS

Ke lokela ho etsa eng ha ke kopana le bothata ka letoto la ka la LUKA?
Haeba u na le mathata ka lethathamo la hau la LUKA, sheba karolo ea tharollo ea mathata bukeng ea mosebelisi bakeng sa tharollo. Haeba bothata bo ntse bo tsoela pele, ikopanye le Lynx Pro Audio SL bakeng sa thuso e eketsehileng.

A na nka sebelisa letoto la LUKA ka lisebelisoa tse ling tsa molumo?
Ee, o ka hokela letoto la LUKA le lisebelisoa tse ling tsa molumo o sebelisa lihokelo tse fanoeng karolong e ka morao. Etsa bonnete ba ho lumellana le ho latela mekhoa e nepahetseng ea ho hokahanya joalokaha e hlalositsoe bukeng ea mosebedisi.

Litokomane / Lisebelisoa

LYNX LUKA Series Digital Signal processors [pdf] Bukana ea Mosebelisi LUKA Series Digital Signal processors, LUKA Series, Digital Signal processors, Signal processors, processors

Litšupiso

• Bukana ea Mosebelisi