lumenradio 840-2110 Automation System with Wireless Modbus
Litlhaloso tsa Sehlahisoa
- Lebitso la Sehlahiswa: W-Modbus
- Khokahano: Wireless Modbus
- Ho phahamisa Dikgetho: DIN rail, Wall mount
- Gateway Options: DIN rail, Wall mount
- Lipontšo tsa Mebala: Blue, Green, Yellow
Litaelo tsa Tšebeliso ea Sehlahisoa
- Tataiso ea ho Kena
Connect your building automation system with wireless Modbus using the W-Modbus device. Choose between DIN rail or wall mount for installation. - Gateway Set-up
Set your Baud rate, stop bit, and parity on the gateway. Move the switch to the appropriate setting (A for DIN rail, B for wall mount). - Connecting Field Devices
Install the LumenRadio node next to your field devices, starting with the one closest to the gateway. Connect the LumenRadio device to the chosen device (zone or room controller) and optionally set a local Baud rate. - Node Configuration
Place the LumenRadio device above the chosen device and connect. The node lights will sweep in blue. Wait until the lights start blinking green, indicating successful connection to the gateway. - Ho Qetella Kemiso
Return to the gateway and move the switch to GATEWAY mode. The devices will blink yellow as they enter secure mode. Once completed, you will have a wireless connection. - Using the W-Modbus App
To use the W-Modbus app, press the button on the gateway three times until it blinks blue twice. Verify your installation in the app and access a detailed overview by selecting Network Map.
Ho fumana lintlha tse ling, etela www.lumenradio.com
Connect your building automation system with a wireless Modbus
For installation, no Modbus cables are needed.
You need this for installation. Choose either W-Modbus DIN rail or W-Modbus wall mount.
The LumenRadio device next to the Modbus master (client) can serve as your gateway, with both DIN rail and wall mount options available.
KHETHEHILENG KHOLO
Beha sekhahla sa hau sa Baud, emisa hanyane 'me u be le tekano hekeng (A kapa B).
A – Tsamaisetsa switjha ho ”COMM” kapa B – Tsamaisa switjha ho 
”.
Tsoela pele ka ho kenya node ea LumenRadio haufi le lisebelisoa tsa hau tsa tšimo, ho qala ka e haufi le heke ea hau. 
Hokela sesebelisoa sa LumenRadio ka sesebelisoa se khethiloeng (selaoli sa libaka). Ka boikhethelo, beha sekhahla sa Baud sa lehae.
Beha sesebelisoa sa LumenRadio ka ho khetheha ka holim'a sesebelisoa se khethiloeng (taolo ea kamore) 'me u kopanye. Ka boikhethelo, beha sekhahla sa Baud sa lehae. 
Mabone a node ea hau joale a tla fiela ka boputsoa.
Ha mabone a qala ho benya a matala, node e fumane heke. Sena se ka nka metsotso e mehlano.
Khutlela hekeng.
A - Tsamaisa swichi ho "GATEWAY" kapa B - Tsamaisa switch ho
Lisebelisoa li benya mosehla ho kena ka mokhoa o sireletsehileng. Sena se ka nka metsotso e 5.
Joale o na le khokahano ea waelese!
To use the W-Modbus app, press the button on the gateway three times so that it blinks blue twice and you are ready to connect.
Netefatsa kopo ea hau ho app. Bakeng sa tlhaiso-leseling e batsiview, kgetha Network Map.
Ithute haholoanyane ho www.lumenradio.com
LBH
P: Ke tseba joang haeba node ea ka e hokahane ka katleho le heke?
A: The lights on the node will start blinking green, indicating a successful connection.
Q: How long does it take for the devices to enter secure mode?
A: The devices may take up to 5 minutes to enter secure mode, indicated by blinking yellow lights.
Litokomane / Lisebelisoa
 |
lumenradio 840-2110 Automation System with Wireless Modbus [pdf] Tlhophiso Tataiso 840-2110, 840-2110 Automation System with Wireless Modbus, Automation System with Wireless Modbus, Wireless Modbus |