LTECH M9 LED Controller Instruction Manual

LTECH M9 LED Controller

The MINI Series LED Remote Controller adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (when unobstructed). When used with the P Series Controllers (P1/P2/P3/P4/P5), one controller supports 5-channel output and is compatible with five types of lamps: DIM (dimming), CT (color temperature), RGB (three-primary color), RGBW (RGB + white), and RGBCW (RGB + cool white + warm white). Within the effective control range, one remote controller can control an unlimited number of controllers, enabling functions such as light on/off, brightness adjustment, color temperature adjustment, RGB static color adjustment, and dynamic mode effects.

It has 9 built-in dynamic modes that can be programmed and modified via the remote controller, meeting users’ needs for different lighting applications. Additionally, it supports enabling/disabling the power-off memory mode and allows setting a 1-9 second fade-in/fade-out time for the controller’s on/off operation.

Tekheniki Parameters

Litekanyo

Ho kenya Sehlahisoa

Mekhoa e 'meli ea ho lokisa "remote holder":

1. Lokisa sets'oants'o sa remote leboteng ka li-screw tse peli.
2. Lokisa sets'oants'o sa hole leboteng ka sekhomaretsi sa 3M.

Hlokomela: Ka kopo, ntša konopo ea betri pele u e sebelisa

Mesebetsi ea konopo

• Bula/E tima: Press briefly to turn the light on or off.
• Bokhubelu/Botala/Boputsoa: Press briefly to turn the static red/green/blue channel on or off; Press and hold to adjust the brightness of the current channel.
• W/CCT: Press briefly to turn the W/CCT channel on or off; Press and hold to adjust the brightness of the W channel or the color temperature of the CCT channel.
• CCT Brightness: Press and hold to adjust the brightness of the CCT channel.
• Color Save Button: Press briefly to recall the saved static color;  Press and hold to save the current static color.
• Program Play Button: Press briefly to switch between 3 dynamic effects (jump, fade, stroboscope) (applied to transitions between saved static colors); Press and hold to play 9 dynamic modes in a loop.
• Mode Save Button: Press briefly to recall the dynamic mode; Press and hold to save the current dynamic effect as a dynamic mode.
• Lebelo/Khanya +/-: Press briefly to adjust the speed of the dynamic mode; Press and hold to adjust the brightness of the dynamic mode.
• Power-Off Memory Mode Switch: Press briefly to enable/disable the memory mode of the current controller.
• On/Off Fade Time: Press and hold the “FADE TIME” button and the Mode Save Button (while pressing the number keys 1-9) to set the on/off fade time of the controller (1-9 seconds).

Usage of the Programming Button

1. Color Selection: Use the number keys 1-7 to store 7 colors. After selecting a color by pressing the RGB button press and hold the Color Save Buttons in sequence to save the current static color. (The color will be automatically saved to the corresponding button.)
2. Press the Programming Play Button to set 3 dynamic effects for the 1-7 static colors.(Single press to switch: Jump, Fade, Strobe)
   ExampLe 1:Red, Green, Blue, Yellow, Purple, Cyan, White Seven colors, Jump/Fade/Strobe
   ExampLe 2:Red, Blue Two colors, Jump/Fade/Strobe
   ExampLe 3:
   Red, White, Green, White 4, Blue Five colors, Jump/Fade/Strobe
   Note: R + B = Purple, R + G = Yellow, G + B = Cyan, R + G + B = White, R/G/B turned off together = Black
3. Press the Speed/Brightness +/- buttons briefly to control the mode brightness. There are 8 brightness levels in total, with the default level set to 5.
4. Press and hold the Mode Save Buttonto save the current static color + dynamic effect to one of the Mode Save Buttons (1-9).

Change Mode Selection List

NO.	Color(Switch Colors via  )	Switch Between 3 Types via   Button Press
		Qhoma	Fade	Strobe
1	Ntsho
2	Khubedu	Bofubelu bo sa fetoheng	Red Fade In and Out	Red Strobe
3	Botala	Tala Green	Green Fade In and Out	Green Strobe
4	Boputsoa	Blue e tsitsitseng	Blue Fade In and Out	Blue Strobe
5	Bosehla	Yellow Yellow	Yellow Fade In and Out	Yellow Strobe
6	Bopherese	Pherese e tsitsitseng	Purple Fade In and Out	Purple Strobe
7	Cyan	Cyan e tsitsitseng	Cyan Fade In and Out	Letlapa la Cyan
8	Bosoeu	White e tsitsitseng	White Fade In and Out	White Strobe
9	Bokhubelu/Botala/Boputsoa	Ho Qhoma-Botala-Botala-Boputsoa	Bokhubelu-Botala-Boputsoa Fade	Red-Green-Blue Strobe
10	Red/Green/Blue/Yellow/ Purple/Cyan/White	Seven-Color Jump	Seven-Color Fade	Seven-Color Strobe

Wiring Diagram for Receiver and Controller

Hlokomela: One remote control can control an unlimited number of controllers

Seta Botjha Mosebetsi wa Konopo

• Reset Static Color:
  Turn off all channels, then press and hold the Color Save Button corresponding to the static color you want to reset to save. This will clear the current static color.
• Reset Dynamic Modes:
  Press and hold both the Color Save Button “5” and the Programming Play Button simultaneously until the indicator light flashes several times and then turns off. This indicates that all dynamic modes have been reset successfully.
• Synchronize the Remote Control’s Dynamic Modes to the Controller:
  Press and hold both the Color Save Button “1” and “4” until the indicator light flashes several times and then turns off. This indicates that all dynamic modes edited on the remote control have been fully synchronized to the controller.
  Note: If the dynamic modes of the remote control have been reset, you need to synchronize the reset dynamic modes of the remote control to the controller again. This avoids desynchronization between the remote control and the controller’s dynamic modes, which would cause abnormal effect issues.

Pair the Controller

Khoutu Matching

1. Method 1: Button Code Matching
   Briefly press the Controller ID Learning Button; the load light will flash. Within 10 seconds, press and hold the Remote Control’s On/Off Button until the load light flashes slowly and then stays on. This indicates successful code matching.
2. Method 2: Power-On Code Matching
   Tlosa molaoli;
   After powering the controller on again, press and hold the On/Off Button on the remote control within 3 seconds until the load light flashes slowly and then stays on. This indicates successful code matching.

Ho Hlakola Khoutu

• Button Code Clearing Method:
  Press and hold the Controller ID Learning Button for 10 seconds. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.
• Power-On Code Clearing Method:
  Perform 10 consecutive power-on and power-off operations on the controller. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.

Boemo ba Leseli la Pontšo

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 30 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Hlokomela: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Lipalangoang le Polokelo

1.  Lipalangoang
   Lihlahisoa li ka romelloa ka likoloi, liketsoana le lifofane.
   Nakong ea lipalangoang, lihlahisoa li lokela ho sireletsoa pula le letsatsi. Ka kopo, qoba ho ts'oha ho matla le ho thothomela nakong ea ho kenya le ho theola.
2. Polokelo
   Maemo a polokelo a tlameha ho tsamaellana le Maemo a Tikoloho a Sehlopha sa I. Lihlahisoa tse bolokiloeng nako e fetang likhoeli tse tšeletseng li khothaletsoa hore li hlahlojoe hape 'me li ka sebelisoa feela ka mor'a hore li tšoanelehe.

Tlhokomelo
Ka kopo sebelisa sebakeng se omeletseng sa ka tlung;

• Ha o kenya betri, ka kopo hokela terminal e ntle le e mpe ka nepo. Haeba remote e ke ke ea sebelisoa nako e telele, ntša betri;
• Ha sebaka se hole se khutsufalitsoe kapa remote e sa sebetse khafetsa, ka kopo fetola betri ka nako;
• Ka kopo, e nke ka hloko 'me ue behe fatše ho thibela ho oela ho bakang tšenyo;
• Haeba ho na le phoso, ka kopo u se ke ua leka ho lokisa lihlahisoa u le mong. Haeba u na le potso, ka kopo ikopanye le barekisi ba hau.
• Bukana ena e ka fetoha ntle le tsebiso e ngoe. Mesebetsi ea lihlahisoa e latela thepa. Ka kopo ikutloe u lokolohile ho ikopanya le barekisi ba rona ba semmuso haeba u na le potso.

Tumellano ea Waranti

Linako tsa waranti ho tloha ka letsatsi la ho beleha: lilemo tse 5.
Litšebeletso tsa mahala tsa tokiso kapa tse ncha bakeng sa mathata a boleng li fanoa ka nako ea tiisetso.

Likhetho tsa Warranty ka tlase:
Maemo a latelang ha a teng ka har'a tebeletso ea tokiso ea mahala kapa litšebeletso tse ling:

• Ho feta linako tsa waranti;
• Tšenyo efe kapa efe ea maiketsetso e bakoang ke matla a phahamengtage, overload, or improper operations; Products with severe physical damage;
• Tšenyo e bakoang ke likoluoa ​​tsa tlhaho le force majeure;
• Lileibole tsa tiisetso le libarcode li senyehile.
• No any contract signed by our company.

1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
2.  Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

TLHOKOMELO

• KOTSI EA HO NYANA: Sehlahisoa sena se na le konopo ea selefouno kapa betri ea chelete ea tšepe.
• LEFU kapa kotsi e tebileng e ka etsahala ha motho a ka nooa.
• Sele e koetsoeng kapa betri ea chelete ea tšepe e ka etsa hore lik'hemik'hale li chese ka hare ho lihora tse 2 feela.
• BOLOKA libeteri tse ncha le tse sebelisitsoeng HO FIHLELA BANA
• Batla tlhokomelo ea bongaka hang ha ho belaelloa hore betri e koetsoe kapa e kentsoe ka har'a karolo efe kapa efe ea 'mele.
• Tlosa 'me hang-hang u sebelise hape kapa u lahle libeteri tse sebelisitsoeng ho latela melao ea lehae 'me u behelle hole le bana. SE KE UA lahla libeteri ka har'a lithōle tsa ntlo kapa licheseng.
• Esita le libeteri tse sebelisitsoeng li ka baka kotsi e mpe kapa lefu.
• Letsetsa setsi sa taolo ea chefo bakeng sa tlhaiso-leseling ea kalafo.
• Mofuta oa betri o lumellanang: CR2032.
• Leshala la leshala la voltage: 3vc.
• Libetri tse sa tjhacheheng ha lia lokela ho tjhajwa hape.
• Se ke oa qobella ho ntša, ho chacha, ho qhaqholla, mocheso ka holimo (tekanyo ea mocheso e boletsoeng ke moetsi) kapa ho chesa. Ho etsa joalo ho ka baka kotsi ka lebaka la ho tsoa moea, ho lutla kapa ho phatloha ho bakang ho chesoa ke lik'hemik'hale.
• Netefatsa hore libeteri li kentsoe ka nepo ho latela polarity (+ le -).
• Se ke oa kopanya libeteri tsa khale le tse ncha, mefuta e fapaneng kapa mefuta ea libeteri, joalo ka alkaline, carbon-zinc, kapa libeteri tse nchafatsoang hape.
• Tlosa 'me hang-hang u sebelise hape kapa u lahle libetri ho thepa e sa sebelisoeng nako e telele ho latela melao ea lehae.
• Kamehla sireletsa ka ho feletseng phaposi ea betri. Haeba karolo ea betri e sa koalehe ka mokhoa o sireletsehileng, emisa ho sebelisa sehlahisoa, tlosa libeteri, 'me u li behe hole le bana.

Lipotso Tse Botsoang Hangata