LTECH E6A Color Temperature Knob Panel

Kenyelletso ea Sehlahisoa

• The stylish appearance design is combined with innovative and colorful status indicators, making the interaction of technology clear at a glance;
• 0-10V Analog + Bluetooth dual-mode knob controller, standard 0-10V dimming, Bluetooth SIG Mesh protocol;
• Supports switching between dimming and color temperature;
• Scene actions can be set through NFC or L-Home APP;
• It can be used with Bluetooth remote controls B1, B2, B8 and RC4-BLE control;
• Supports linkage control with L-Home smart home system and APP to realize intelligent control such as local scenes, automation and other intelligent controls;
• With the intelligent gateway, you can realize the linkage control of smart platforms such as HomeKit, Siri, Google, Amazon.

Litlhaloso tsa Parameters

Boholo ba Sehlahisoa

Yuniti: mm

Tlhaloso ea Mosebetsi oa Sehlahisoa

• Scenes key: Factory default color temperature mode: the default lamp color temperatures are 2700K (Key 1), 3500K (Key 2), 5000K (Key 3), and 6500K (Key 4); Single press key 1/2/3/4 of the scene key triggers the scene, which requires binding the scene actions via L-Home APP Bluetooth wireless or NFC Lighting APP NFC.
• Kotola: Supports single click, double click, long press and rotation; supports setting three levels of sensitivity adjustment: high, medium and low.
• Lebone la sesupo: The corresponding color is displayed according to the current adjustment value of the knob: white (BRT) and yellow (CT). The factory default color is white.
• Khutlisa ho litlhophiso tsa feme: Press and hold the knob for 15 seconds until the indicator light flashes slowly, then release it. Within 3 seconds, press the knob 3 times briefly, and the indicator light will flash quickly.
• Kenyelletso ea ho sebelisa knob:

Hlokomela: Different operations are available depending on the configuration type of the knob.

Mehato ea ho Kenya

1. Tima sesebelisoa se seholo sa motlakase, 'me u netefatse hore ha ho li-attachments tse kang samente leboteng le ka hare la lebokose la 86 junction. Fokotsa bolelele ba thapo ea motlakase ka har'a lebokose la mateano ho fihla ho 10 cm. Sebelisa screwdriver e sephara ho bula lebokose le ka tlase la phanele ea kotola, 'me u fumane sebaka sa ho tšoaea sa NFC karolong ea polasetiki.
2. Use your mobile phone to open the NFC Lighting APP, click [Read/Write Smart Device] on the ” Home Page”, bring the mobile phone sensing area close to the knob panel NFC identification point, read the knob panel parameters, set the parameters according to your needs (see P8 for details), click [Write] in the upper right corner, and then bring the mobile phone sensing area close to the knob panel NFC identification point, and you can directly write to the knob panel.
3. See Figure 1, after using the mobile phone’s NFC to read and write parameters, connect the live wire to the L interface of the smart switch, and the neutral wire to the N interface, and confirm that the power cable is in good contact with the switch binding post and there is no exposed copper wire. (The circuit breaker rating should not exceed 35A) See Figure 2, fix the bottom box to the wall secret box with screws, so that the bottom box fits the wall.
4. Eketsa phanele ebe u e koala ka lebokoseng le ka tlaase, bulela heke e kholo ea matla, tobetsa konopo ea knob, 'me u ka laola leseli ka mokhoa o tloaelehileng, ho bolelang hore ho kenya ho nepahetse.

Setšoantšo sa khokahano

1. Wiring method for single E6A to control multiple drivers.
2. 0-10V Bluetooth wireless connection method.

Ka kopo, leka ho qoba hore li-driver tsa mohala li behoe haufi le libaka tse kholo tsa lintho tsa tšepe kapa libakeng tse nang le mecha ea litaba ea tšepe ho qoba tšitiso.

Sebelisa le NFC Lighting APP

1. Ngolisa akhaonto
   Scan and download the QR code through your mobile phone, and follow the prompts to complete the APP installation and log in/register. (Due to performance requirements, the phone model is required for Apple: iPhone 8 and above, and operating system iOS 13 and above; Android: NFC-functional model)When setting the device parameters, the operation must be performed when the device is powered off.
2. Read/write knob panel
   Click [Read/Write Smart Device] on the “Homepage” of the APP, and bring the phone’s sensing area close to the NFC marking point of the knob panel (Figure P4) to read the knob panel parameters.
3. How to set control type and parameters
   Mofuta oa taolo: Click “Control type” to select DIM/CT, default CT.
   Litlhophiso: Click “Parameter” to edit the knob sensitivity, indicator light, key press sound, scene key, powered on state and other advanced parameters.
4. Mokhoa oa ho seta likotola le linotlolo tsa ketsahalo
   Kotola: Click “Knob Sensitivity” to select low/medium/high sensitivity; turn on/off indicator light, turn on by default; turn on/off key press sound, turn on by default.
   Scene key: Press and hold the scene key to bind to execute actions.
5. Boemo ba ho sebetsa le litlhophiso tsa ho seta fektheri bocha
   Boemo ba ho sebetsa: You can choose to full bright/light is off/memorize/custom, default memorize.
   Khutlisa feme: After clicking the “All parameters are restored to factory default” button, all parameters on the APP page will be restored to factory default value. At this time, you need to click the “Write” button to write the parameters to the device to restore the device to factory settings.

E sebelisoa le L - Home APP.

Ngolisa akhaonto
Skena khoutu ea QR e ka tlase ka mohala oa hau. Ka mor'a ho qeta ho kenya APP ho latela litlhahiso, u ka tsoela pele ka ts'ebetso ea ho kena / ho ngolisa.

Ts'ebetso ea ho kopanya
Bakeng sa basebelisi ba bacha, ka mor'a ho theha lehae ho APP, tobetsa letšoao la "+" hukung e ka holimo ho le letona ho sebopeho sa [Kamore] bakeng sa ho eketsoa. Khetha "LED Controller" ho tsoa lethathamong la kenyelletso ea lisebelisoa, 'me u latele litlhahiso tsa sebopeho sa ho kenya ho tlatsa tlatsetso.

Mokhoa oa ho seta likotola le linotlolo tsa ketsahalo
Tobetsa phanele ea konopo e kentsoeng ka har'a sehokelo sa "kamore" ho kenya sebopeho sa [Taolo].

Kotola: Support clicking the knob to enter the page to adjust the light.
Scene key: Each key supports binding different execution actions.

Binded by remote control
The knob panel can be bound to the B1/B2/B8/RC4-BLE remote control as a lamp;
Each partition of the remote control supports binding a knob panel;
After binding, the remote control area controls the load on the knob panel.

Mokhoa oa ho beha liketsahalo le boiketsetso

Sebaka sa sebaka: Select “Local scene” in the [Smart] interface and click “+” to create a local scene. Click Add Action and select the corresponding device type action.
Cloud scenario: Make sure that smart gateways have been added to the home, such as Super Panel 12S.
Khetha "Cloud Scene" sehokelong sa [Smart] ebe o tobetsa "+" ho theha sebaka sa maru. Tobetsa Eketsa Ketso ebe u khetha ketso ea mofuta oa sesebelisoa e tsamaellanang.

Motlakase: Ensure that smart gateways have been added to the home, such as the Super Panel 12S.

Select “Automation” in the [Smart] interface and click “+” to create automation. You can choose local/cloud execution method, as well as set trigger conditions and execute actions. When the set trigger conditions are met, a series of device actions are automatically triggered to achieve remote linkage.

Khutlisa ho Litlhophiso tsa Feme

Mokhoa oa 1: After the E6A knob panel is connected to power, press the knob for 15 seconds (see Figure 1) until the indicator light flashes slowly and then releases. Press the knob for a short time 3 times within 3 seconds, and the indicator light flashes quickly, indicating that it has returned to the factory settings.

Mokhoa oa 2: Taba ea pele, etsa bonnete ba hore sesebelisoa se tsamaisoa hantle 'me se maemong a marang-rang. Ebe, bula L - Home APP, fumana sesebelisoa, 'me u kenye leqephe la eona la litlhophiso. Tobetsa konopo ea "Delete Device" (bona setšoantšo sa 2). Ha tsamaiso e etsa hore "Tlhaloso e atlehe", e bolela hore sesebelisoa se khutliselitsoe ka katleho ho litlhophiso tsa fektheri.

Tlhokomelo

• Ho kenya lihlahisoa le ho laela ho lokela ho etsoa ke setsebi se tšoanelehang.
• LTECH products are and not lightningproof or waterproof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
• Ho senya mocheso o motle ho tla lelefatsa bophelo ba ho sebetsa ba lihlahisoa. Ka kopo netefatsa moea o motle.
• Ka kopo sheba hore na molumo o sebetsangtage sebelisitsoeng e lumellana le litlhoko tsa parameter tsa lihlahisoa.
• Bophara ba terata e sebelisitsoeng bo tlameha ho khona ho ts'ehetsa lisebelisoa tse khanyang tseo u li kopanyang le ho etsa bonnete ba hore lithapo li nepahetse.
• Pele o sebelisa lihlahisoa, ka kopo etsa bonnete ba hore lithapo tsohle li nepahetse.
• Haeba ho na le phoso, ka kopo u se ke ua leka ho lokisa lihlahisoa u le mong. Haeba u na le lipotso, ka kopo ikopanye le barekisi ba hau.

Tumellano ea Waranti

• Linako tsa waranti ho tloha ka letsatsi la tlhahiso: lilemo tse 5.
• Litšebeletso tsa mahala tsa tokiso kapa tse ncha bakeng sa mathata a boleng li fanoa ka nako ea tiisetso. Mekhaollo ea tiisetso ka tlase:
• The following conditions are not within the guarantee range of free repairing or replacement services:
  • Ho feta linako tsa waranti.
  • Tšenyo efe kapa efe ea maiketsetso e bakoang ke matla a phahamengtage, ho tlala, kapa ts'ebetso e sa lokelang. Lihlahisoa tse nang le tšenyo e matla ea 'mele.
  • Tšenyo e bakoang ke likoluoa ​​tsa tlhaho le force majeure.
  • Lileibole tsa tiisetso le libarcode li senyehile.
  • No contract or invoice signed by LTECH .

1. Ho lokisa kapa ho nkela sebaka ke eona feela pheko bakeng sa bareki. LTECH ha e ikarabelle bakeng sa tšenyo efe kapa efe ea tšohanyetso kapa ea litlamorao ntle le haeba e le ka molao .
2. LTECH e na le tokelo ea ho fetola kapa ho lokisa lipehelo tsa tiisetso ena. Tiisetso e hlahang ka mongolo e tla ba teng.
   Bukana ena e ka fetoha ntle le tsebiso e 'ngoe. Mesebetsi ea lihlahisoa e itšetlehile ka thepa. Ka kopo, ikutloe u lokolohile ho ikopanya le barekisi ba rona ba semmuso haeba u na le lipotso.

Nako ea Nchafatso: 2025.03.21_A0 17

FAQs

Joang ho laola sesebelisoa u le hole?

Ha e pentiloe le Smart gateway ea k'hamphani ea rona, sesebelisoa se ka laoloa hole ka 4G/5G/WiFi ka mohala oa thekeng.

Litokomane / Lisebelisoa

LTECH E6A Color Temperature Knob Panel [pdf] Bukana ea Mosebelisi E6A Color Temperature Knob Panel, E6A, Color Temperature Knob Panel, Temperature Knob Panel, Knob Panel, Panel

Litšupiso

• Bukana ea Mosebelisi