MDMMA1010.1-02 Modbus Sensor Box
“
LSI LASTEM Seletsa
Litlhaloso:
- Tataiso ea ntlafatso ea Firmware: Doc. AN_01350_en_2
- Letsatsi: 31/10/2024
- Lisebelisoa tse tšehelitsoeng: Lisebelisoa tsohle tsa LSI LASTEM tse nang le bootloader
tšobotsi
Litaelo tsa Tšebeliso ea Sehlahisoa:
1. Sepheo:
Tokomane ena e fana ka litaelo tsa ho nchafatsa firmware ea
Lisebelisoa tsa LSI LASTEM tse nang le karolo ea bootloader.
2. Mokhoa oa ho ntlafatsa:
- Khoasolla data efe kapa efe ea bohlokoa e bolokiloeng mohopolong, joalo ka
tlhophiso le litekanyo. - Tlosa zip e fanoeng file ho foldareng ho PC ea hau.
- Netefatsa hore o fumane mofuta oa firmware o tsamaellanang ho tsoa ho LSI
LASTEM bakeng sa sesebelisoa sa hau. - Qala ts'ebetso ea ntlafatso 'me u qalise sesebelisoa u sebelisa sesebelisoa sa
Konopo ea On/Off kapa konopo ea Reset ha ho hlokahala.
LBH:
P: Ke lokela ho etsa eng haeba ntlafatso ea firmware e hloleha?
A: Haeba firmware e hlolehile ho ntlafatsa, etsa bonnete ba hore u
latela mehato eohle ka nepo. Haeba bothata bo ntse bo tsoela pele, ikopanye le LSI
LASTEM tšehetso bakeng sa thuso.
"`
Tataiso ea ntlafatso ea firmware ea LSI LASTEM Instrument
Doc. AN_01350_en_2
31/10/2024
Leqephe. 1/2
1 Sepheo
Tokomane ena e na le lintlha tse hlokahalang ho ntlafatsa firmware ea sesebelisoa leha e le sefe sa LSI LASTEM se nang le sesebelisoa sa bootloader. Lisebelisoa tse latelang li tšehetsoa:
· E-Log: version >= 2.32.00 · R/M-Log: version >= 2.12.00 ntle le tse nang le boema-kepe ba Ethernet · Heat Shield Master unit: version >= 1.08.00. · DEA420 (SignalTransducerBox): mofuta>= 1.00.01 · DEA485 (ModbusSensorBox): mofuta>= 1.04.00
2 Mokhoa oa ho ntlafatsa
1) Khoasolla data efe kapa efe ea bohlokoa e bolokiloeng mohopolong haeba e teng (mohlala, tlhophiso, litekanyo). 2) Tlosa zip file ho foldareng ho PC ea hau. 3) Etsa bonnete ba hore u fumane mofuta oa firmware o lumellanang le LSI LASTEM bakeng sa sesebelisoa sa hau
mohlala/mofuta. Lebitso la ba amohetseng file e na le mohlala oa sesebelisoa se lebisitsoeng le mofuta o mocha oa firmware ka mor'a ho ntlafatsa. E amohetseng file e tlameha ho kopitsoa foldareng e nang le ts'ebetso ea ntlafatso ebe e rehoa lebitso la FW.hex. 4) Hokela PC (boema-kepe ba RS232 kapa koung ea USB e sebelisang adaptara ea USB) ho koung ea serial e sebelisoang ke sesebelisoa bakeng sa uploading ea eona ea ho seta (R/M-Log: RS232-1, DEA485: RS232-2). 5) Qala lenaneo la batch FWupgService: a. Haeba kou ea serial ea PC e hokahaneng le sesebelisoa e fapane le com1, bonts'a hore na ke kou efe
e sebelisitsoeng (mohlala, "FWupgService com3"). b. Kamora ho qala ts'ebetso, qala sesebelisoa ka konopo ea On/Off, kapa konopo ea Reset haeba
available. On R/M-Log instruments the power off operated from keyboard is NOT sufficient, use instead the Reset button. Having E-Log and R/M-Log instrument respectively from versions 2.40.02 and 2.19.02 or greater, the power off/on cycle must be done keeping any of the instrument keyboard button pressed. c. When the device has been reset, press CTRL C; when procedure asks for stop, answer No (N) d. Check the result (step “Verifying”): if not corrected, re-start a new procedure, possibly by decreasing the communication speed (editing the batch program with a text editor, change the value on the line indicated by the set ComSpeed=115200, enter 9600). e. At the end of the operations, the procedure will automatically restart the device; verify if the device functionality is the one as expected. Heat Shield Master unit instruments require to reset the survey-mode using the specific command of the local user interface (see the instrument user’s manual).
Doc. AN_01350_en_2
31/10/2024
Leqephe. 2/2
Litokomane / Lisebelisoa
 |
LSI LASTEM MDMMA1010.1-02 Modbus Sensor Box [pdf] Bukana ea Mosebelisi MDMMA1010.1-02, MDMMA1010.1-02 Modbus Sensor Box, MDMMA1010.1-02, Modbus Sensor Box, Sensor Box, Lebokose |