TCG140-4 GSM-GPRS Remote IO module
Bukana ea Mosebelisi
Tlhaloso e khutšoanyane
TCG140-4 ke 4G LTE Cat.1 ea universal I/O module. E boetse e ts'ehetsa puisano e se nang mohala ea 3G le 2G mme e fana ka khokahanyo ea data ho LTE-FDD, DC-HSDPA, HSPA+, HSDPA, HSUPA, WCDMA, EDGE, le marang-rang a GPRS.
Sesebelisoa se na le lisebelisoa tse 2 tsa dijithale, tse 4 tsa analog, li-interface tsa dijithale bakeng sa li-sensor tsa kantle, le li-relay tse 4.
Lisebelisoa tse peli tsa analog li ka fetoloa ka loop ea hajoale (0-20mA) kapa vol.tage mekhoa. Li-relay li ka kengoa tšebetsong e le hole (ka SMS kapa taelo ea HTTP API) kapa sebakeng sa heno - ho tsoa maemong a litekanyetso tse shebiloeng.
TCG140-4 e ts'ehetsa li-sensor tsohle tsa dijithale tsa Teracom.
Litekanyetso tsohle tse shebiloeng le boemo ba li-relay li ka bolokoa nako le nako ho logger ea data e kentsoeng. Hape hoa khoneha ho hlophisa litlaleho ka boemo leha e le bofe ba alamo.
Mojule oa I/O oa bokahohle o tšehetsa HTTP API bakeng sa puisano e bonolo ea M2M. Sesebelisoa se romella nako le nako HTTP/HTTPS Post ho seva se hole se nang le boemo ba XML/JSON file. E le karabo, seva se ka romela litaelo bakeng sa ts'ebetso ea relay kapa liphetoho tsa li-setting.
Likaroloana
- Khokahano ea lihlopha tse ngata;
- Setsebi sa data se nang le lirekoto tse fihlang ho 70000;
- Seta ka USB, SMS, le HTTP API;
- 2 lintlha tsa "dry contact" tsa dijithale;
- Ho fihla ho li-analog tse 4 tse nang le 0 ho isa ho 10VDC;
- Ho fihla ho li-inputs tse 2 tsa hona joale tsa loop (4-20mA);
- Setable multiplier, offset, le dimension bakeng sa ho kenya analoge;
- Li-relay tse 4 tse nang le mabitso a NO le NC;
- Tšehetso ea 1-Wire bakeng sa li-sensor tsohle tsa Teracom;
- tšehetso ea li-sensor tsa MODBUS RTU;
- MQTT 3.1.1 tšehetso;
- Litemoso tsa alamo ea SMS bakeng sa linomoro tse fihlang ho 5;
- Litemoso tsa alamo ea lengolo-tsoibila bakeng sa batho ba ka bang 5 ba amohelang lengolo-tsoibila;
- Nako le nako HTTP/HTTPS Post e nang le boemo ba hajoale ho XML kapa JSON file ho seva e hole;
- Nako le nako HTTP/HTTPS Post e nang le data ea logger ka sebopeho sa CSV ho seva se hole;
- Litaelo tsa HTTP API;
- Ntlafatso ea firmware ka USB kapa Marang-rang.
Lisebelisoa
TCG140-4 e loketse boiketsetso ba indasteri, lits'ebetso tsa ho fumana data, ho lekola tikoloho, taolo ea lehae ea paramente ea motlakase le e seng ea motlakase, boiketsetso ba moaho, jj.
- Sistimi ea SCADA
TCG140-4 e kenyelelitsoe habonolo lits'ebetsong tsa SCADA. Nako ea HTTP/HTTPS Post e loketse li-platform tsa bareki-server. - Setsi sa data se ikemetseng
Sesebelisoa se ka sebelisoa e le logger ea data e tloaelehileng e nang le bonyane nako ea ho rekota e ka tlaase ho motsotso oa 1. Lintlha tse kentsoeng li ka romelloa nako le nako ho seva e inehetseng joalo ka CSV file. - Tlhokomelo le taolo ea tikoloho
Litlhaloso
- Litšobotsi tsa 'mele
Litekanyo: 158 x 119 x 34 mm
Boima ba 'mele: 470 g
Ho phahamisa: lebota le seporo sa DIN - Meeli ea tikoloho
Mocheso o sebetsang: -20 ho isa ho 55°C
Mocheso o sebetsang oa ho seta USB: 0 ho 40°C
Mocheso oa polokelo: -25 ho isa ho 60°C
Mongobo o Ambient Relative: 5 ho isa ho 85% (o sa fokotseheng) - Maemo le Litifikeiti
Tšireletseho: EN 62368-1: 2014 + EN 62368-1:2014/AC1-3:2015 + EN 62368-1:2014/A11:2017 +
EN 62368-1:2014/AC:2017-03:2017, EN 62311:2008
EMC: EN 55032: 2015 + EN 55032: 2015/AC:2016-07 + EN 55032: 2015/A11:2020
EN 55024: 2010 + EN 55024: 2010/A1:2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013 + EN 61000-3-3: 2013/A1:2019
RFU: EN 301 489-19 V2.1.1, EN 301511 V12.5.1, EN 301 908-1 V11.1.1,
EN 301 908-13 V11.1.2, EN 301 908-2 V11.1.2, EN 303 413 V1.1.1
Botala: RoHS
• Waranti
Nako ea tiiso: lilemo tse 3
• Phepelo ea motlakase
Tshebetso voltage fapaneng (ho kenyeletsoa -15 / + 20% ho latela IEC 62368-1): 10 ho 28 VDC
Tšebeliso ea hona joale: 0.37A @ 12VDC - Sehokelo sa mehala
Maemo: LTE-FDD, DC-HSDPA, HSPA+, HSDPA, HSUPA, WCDMA, EDGE le GPRS
Lihlopha (mofuta oa TCG140-4e):
4G LTE: B1/B3/B7/B8/B20/B28
3G: B1/B8
2G: B3/B8
Lihlopha (TCG140-4n e fapaneng):
4G LTE: B2/B4/B5/B12/B13/B25/B26
3G: B2/B4/B5
2G: Ha e tšehetsoe
Lihlopha (TCG140-4a e fapaneng):
4G LTE: B1/B2/B3/B4/B5/B7/B8/B28/B66
3G: B1/B2/B5/B8
2G: B2/B3/B5/B8
Lihlopha (mofuta oa TCG140-4g):
4G LTE: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/ B38/B39/B40/B41
3G: B1/B2/B5/B8
2G: B2/B3/B5/B8
Boholo ba SIM card: Micro
Sehokelo sa lenakana: SMA-F - Lisebelisoa tsa analoge
Ho itšehla thajana: Ho se khethe
Mofuta: E sa feleng
Qeto: li-bits tse 10
Mokhoa (Litlhahiso tsa Analog 1 le 2): Moqtage
Mokhoa (Litlhahiso tsa Analog 3 le 4): Moqtage / Hona joale (WEB interface e ka khethoang)
Mefuta e Kenyellelitsoeng: 0 ho 10 VDC, 0 ho 20 mA
Ho nepahala: ±1%
Sampling Sekhahla: 500ms mocha ka mong (karolelano ea boleng ba 250 samphanyane)
Tšitiso ea ho Kena: 1 mega-ohm (mets.)
Mohanyetsi o hahelletsoeng ka har'a mokhoa oa hajoale: 410 ohms - Lisebelisoa tsa dijithale
Ho itšehla thajana: Ho se khethe
Mofuta: Ho omella
Samplebelo la bolelele: 10ms
Nako ea ho sefa ea dijithale: 30ms - Liphetho tsa relay
Mofuta: Foromo ea C (mabitso a NO le NC)
Ikopanye le boemo ba hajoale: 3 A @ 24 VDC, 30 VAC (mojaro o hanyetsanang)
Tšireletso ea pele ea ho hanyetsa: 100 mega-ohms (min.) @ 500 VDC
Mamello ea mechine: 10 000 000 ts'ebetso
Mamello ea motlakase: 100 000 ts'ebetso @ 3 Mojaro o hanyetsang
Khanyetso ea ho ikopanya: 50 milli-ohms max. (theko ea pele)
Bonyane tlhahiso ea pulse: 0.1 Hz ka mojaro o lekantsoeng
TLHOKOMELISO: Sesebediswa ha se na lisebelisoa life kapa life tsa ka hare tsa ts'ireletso ea overcurrent mehala ea ho ikopanya le li-relays.
Li-fuse tsa kantle kapa li-circuits tse fokotsang nako e khuts'oane, li lekantsoe ho 3 Amps, li lokela ho sebelisoa bakeng sa tšireletso ea overcurrent ea mela e hokahanyang. - Khokahano ea sensor ea dijithale (1-Wire le RS-485)
Sephetho voltage: 5.0 ± 0.3 VDC
Boholo ba tlhahiso ea hajoale (bakeng sa likhokahano ka bobeli): 0.2A - Mohopolo oa ka hare oa FLASH
Mamello: Lipotoloho tse 100 000 (taelo efe kapa efe ea ho boloka kapa moqolo o felletseng (lirekoto tse 70000) tsa logger) - Betri ea lithium
Mofuta: CR1220
Tlhokomeliso! Kotsi ea ho phatloha haeba betri e nkeloa sebaka ke mofuta o fosahetseng.
Ho kenya
Sesebelisoa sena se tlameha ho kenngoa ke basebetsi ba tšoanelehang. Ho kenyelletsa ho kenyelletsa ho kenya sesebelisoa, ho hokahanya antenna, ho hokahanya lintho tse kenang le tse tsoang, ho fana ka matla, le ho hlophisa web sebatli. Sesebelisoa sena ha sea lokela ho kenngoa ka ho toba ka ntle.
Ela hloko! Pele o kenya SIM card sekoting sa karete, ka kopo etsa bonnete ba hore PIN khoutu e koetsoe.
5.1. Ho phahamisa
TCG140-4 e lokela ho kenngoa sebakeng se hloekileng le se omileng sebakeng se sa cheng. Ho kgothaletswa ho kenya moya bakeng sa ho kenya moo mocheso o lebeletsweng ho ba hodimo.
Hlomella sesebelisoa leboteng ka ho sebelisa lithaole tse peli tsa polasetiki tsa 8x60mm (mohlalaample Würth GmbH 0912 802 002) le likurufu tse peli tsa dowel 6x70mm (ex.ample Würth GmbH 0157 06 70). Sheba Sehlomathiso C, feiga. 1 bakeng sa lintlha tsa mochini.
Boloka sebaka ho tloha lisebelisoa tse haufi. Lumella sebaka sa 50 mm ka mahlakoreng 'ohle, joalo ka ha ho bontšitsoe setšoantšong sa 2 ho Sehlomathiso sa C, sena se fana ka moea le ho arohana ha motlakase.
Bakeng sa ho kenya seporo sa DIN, DIN-RAIL-MOUNT-KIT e lokela ho sebelisoa.
5.2. Lihokelo
Ela hloko! Tlosa phepelo ea motlakase pele o kenya mohala.
Mokhoa o nepahetseng oa wiring ke o latelang:
- Etsa bonnete ba hore motlakase o tingoe;
- Etsa likhokahano tsa wiring ho li-terminals;
- Sebelisa matla.
Ho khothalletsoa ho leka le ho lokisa TCG140-4 ntle le sesebelisoa se laoloang.
Etsa bonnete ba hore lithapo li khomaretsoe hantle ho li-terminals le hore li-terminal li tiisitsoe.
Ho se be le likhoele tse nepahetseng le ho hlophisoa ho ka baka tšenyo e sa feleng ho module kapa thepa eo e hokahaneng le eona kapa ka bobeli.
Libaka tse kentsoeng le tse hlahisoang li bontšitsoe ka tlase:
| Sehokedi 1 Matla - 2.1 × 5.5, bohareng bo botle Sehokedi 2 1-Wire interface Sehokedi 3 RS-485 segokanyimmediamentsi sa sebolokigolo Sehokedi 4 USB e nyane Sehokedi 5 Pin1 - Digital ho 1 Pin2 - Fatše Pin3 - Digital ho 2 Pin4 - Analog ho 1 Pin5 - Fatše Pin6 - Analog ho 2 Pin7 - Analog ho 3 Pin8 - Fatše Pin9 - Analog ho 4 |
Sehokedi 6 Pin1 - NC Relay 1 Pin2 - COM Relay 1 Pin3 - HA HO Relay 1 Pin4 - NC Relay 2 Pin5 - COM Relay 2 Pin6 - HA HO Relay 2 Pin7 - NC Relay 3 Pin8 - COM Relay 3 Pin9 - HA HO Relay 3 Pin10 - NC Relay 4 Pin11 - COM Relay 4 Pin12 - HA HO Relay 4 Sehokedi 7 Antenna ea GSM Sehokedi 8 SIM card |
Sehokedi 2
 |
Pin | Tlhaloso | 'Mala oa lithapo tsa UTP tse tsamaellanang |
| 1 | 1-Wire GND (ka ho le letšehali haholo) | Bosoeu/Bosootho | |
| 2 | 1-Qeto GND | Bosoeu/Botala | |
| 3 | 1-Lintlha tsa Wire | Botala | |
| 4 | 1-Qeto GND | Bosoeu/Namune |
Sehokedi 3
 |
Pin | Tlhaloso | 'Mala oa lithapo tsa UTP tse tsamaellanang |
| 1 | ha e kopane (ka ho le letšehali haholo) | Orange / White Tracer | |
| 2 | ha e kopane | namunu | |
| 3 | ha e kopane | Motlakase o Motala / o Mosoeu | |
| 4 | Mola oa B- | Boputsoa | |
| 5 | Mohala A+ | Blue/White Tracer | |
| 6 | ha e kopane | Botala | |
| 7 | +VDD | Tracer e sootho/e tšoeu | |
| 8 | GND | Brown |
5.2.1. Khokahano ea phepelo ea motlakase
TCG140-4 e etselitsoe hore e fanoe ke adapter SYS1308-2412-W2E kapa e tšoanang, e reretsoeng ho sebelisoa maemong a overvolver.tage sehlopha II. Thepa ea phepelo ea motlakase e tla hanana le lipotoloho tse khutšoane mme e tlalehe ho potoloho ea bobeli.
Ha o sebelisoa, u se ke ua beha thepa e le hore ho be thata ho khaola sesebelisoa ho tloha phepelong ea matla.
5.2.2. 1-Wire interface
1-Wire ke lets'oao la khoebo le ngolisitsoeng la Maxim integrated products, Inc. E etselitsoe ho hokahanya li-sensor tse 'maloa holim'a lithapo tse khutšoane. Ha e loketse sebaka se selelele kapa libaka tse lerata.
Palo e kholo ea li-sensor (1-Wire kapa RS-485) e amanang le TCG140-4 ke tse robeli.
Sesebelisoa se tšehetsa li-sensor tsohle tsa Teracom 1-Wire. Li-sensor tse hokahantsoeng li bonoa ka bo eona 'me boholo bo loketseng bo abeloa.
Ho khothaletsoa ka matla ho sebelisa "daisy-chained" (linear topology) bakeng sa litsamaiso tse nang le li-sensor tse ngata:
Ho khothaletsoa ka matla ho sebelisa lithapo tsa UTP/FTP feela le ho boloka bolelele ba thapo ho fihla ho 30m. Leha ts'ebetso e fihletsoe sebakeng se selelele, re ke ke ra tiisa ts'ebetso e se nang liphoso ho feta bolelele ba lithapo bo boletsoeng. Re khothaletsa ho bala malebela a Maxim a 1-Wire ho https://www.maximintegrated.com/en/design/technical-documents/tutorials/1/148.html.
Re netefatsa ts'ebetso e nepahetseng feela ka li-sensor tsa Teracom 1-Wire.
5.2.3. RS-485 segokanyimmediamentsi sa sebolokigolo
RS-485 ke tekanyetso ea litsamaiso tsa serial tsa likhokahanyo tse hlalosoang ke Telecommunications Industry Association (TIA) le Electronic Industries Alliance (EIA). Ho phethahatsa maemo, mekhoa ea puisano e ka sebelisoa ka katleho libakeng tse telele le libakeng tse lerata la motlakase (liindasteri).
Palo e kholo ea li-sensor (1-Wire kapa RS-485) e amanang le TCG140-4 ke tse robeli.
MODBUS RTU protocol e bolela hore aterese ea sesebelisoa e lokela ho ba pakeng tsa 1 le 247.
Mosebelisi o lokela ho hlokomela litlhophiso tse nepahetseng tsa liaterese.
Bakeng sa lits'ebetso tsa li-sensor tse ngata "daisy-chained" (linear topology) e lokela ho sebelisoa:
Lihokelo li lemohuoa ka likhoele tsa UTP/FTP tse nang le likhokahanyo tsa RJ-45. Tekanyetso e tsebahalang ea Ethernet wiring ANSI/TIA/EIA T568B e sebelisoa.
Ho khothalletsoa ho sebelisa lithapo tse tloaelehileng tsa patch bakeng sa marang-rang a LAN.
Ela hloko! Tlhokomelo e khethehileng e lokela ho lefshoa ha ho felisoa ha bese. Sensor ea ho qetela ka ketane e lokela ho ba le terminator ea 120-ohm e kentsoeng ho sokete ea mahala ea RJ-45. Terminator e fanoa hammoho le module.
Re khothaletsa ho boloka bolelele ba thapo ho fihla ho 30 m, leha sebopeho sa RS-485 se sebetsa sebaka se selelele haholo.
5.2.4. Khokahano ea lisebelisoa tsa dijithale
Ela hloko! Lintho tse kenang tsa dijithale HA SEBE galvanic tse arohaneng.
Lisebelisoa tsa dijithale tsa TCG140-4 li ka sebelisoa e le "khokahano e omileng" feela.
Lentsoe "dry contact" le bolela hore ho kenya letsoho ho ka kopanngoa lisebelisoa tse nang le drain e bulehileng kapa
liphetho tsa relay - switch ea ho ikopanya le monyako, konopo ea push, detector ea PIR, jj.
Setšoantšo se latelang se bontša hore na konopo ea alamo e ka kopanngoa joang le tlhahiso ea digital ea TCG140-4. Lehlakore le leng la lebitso le hokahane le "Digital In" ha lehlakore le leng le hokahantsoe le "GND" terminal.
Bolelele bo phahameng ba cable bakeng sa ho kenya letsoho ka digital bo lokela ho fihla ho limithara tse 30.
5.2.5. Khokahano ea li-analog
Ela hloko! Litlhahiso tsa analoge HA LI SEBELE ka thoko.
Litlhahiso tsa analog tsa TCG140-4 li ka sebelisoa bakeng sa ho lekola matla a DCtagho fihlela ho 10VDC. Li ka hokahanngoa ka kotloloho ho li-sensor le li-transmitters tse nang le tlhahiso e joalo ea analog.
"Multiplier", "Offset" le "Dimension" bakeng sa tlhahiso e 'ngoe le e' ngoe ea analoge e fana ka monyetla oa ho beha leihlo li-sensor tse nang le lipoelo tsa analog le ho bona ka kotloloho paramethara e lekantsoeng.
Hoa khoneha ho beha leihlo voltage kholo ho feta 10VDC ka ho eketsa mohanyetsi oa kantle ka letoto. Bakeng sa mega-ohm e 'ngoe le e 'ngoe, voltage tla atolosoa ka 5.893V. Mohanyetsi oa kantle o lokela ho ba le 1% kapa ho nepahala ho betere.
Ho lisebelisoa tsa analoge 3 le 4 ka hare li ka abeloa 410-ohm resistor ka ho lumellana le ho kenya letsoho. Tabeng ena, ho kenya letsoho ho ka amohela ka ho toba li-sensor le li-transmitters tsa 0-20mA hona joale.
Ho fetoha ha mohanyetsi ho etsoa ke sebopeho sa mosebelisi.
Setšoantšo se latelang se bontša kamoo а 0-10V sensor ea analoge e hokahaneng kateng le "analog input 1" 'me 0-20mA ea hona joale ea loop transmitter e hokahane le "analoge input 3. Analog input 3" e boemong ba hona joale.
Bolelele bo phahameng ba cable bakeng sa ho kenya analoge bo lokela ho fihla ho limithara tse 30.
5.2.6. Khokahano ea li-relay
Mahokelo a relay a hoketsoe ka hare ka kotloloho ho lihokelo tsa terminal.
Ela hloko! Ha ho ts'ireletso ea ka hare ea overcurrent mehala ea likhokahano ea li-relay.
Bakeng sa li-relay tsohle hangata lia buleha, hangata li koetsoe le likhokahano tse tloaelehileng lia fumaneha. Bakeng sa meroalo e nang le switchable e phahameng ea hajoale/voltagHo feta kamoo ho boletsoeng, ho lokela ho sebelisoa relay ea kantle.
Ha li-relay tsa mochini li chencha meroalo e matla joalo ka li-motor, li-transformer, li-relay, joalo-joalo, ea hajoale e tla pota-pota likhokahano nako le nako ha mabitso a bula. Ha nako e ntse e ea, sesosa sena se aparela mabitso a relay a khutsufatsang bophelo ba bona. Ha o chencha mojaro oa inductive, ho khothaletsoa hore ho sebelisoe lisebelisoa tsa ts'ireletso ea khokahano ea relay.
Lipontšo tsa LED
Lipontšo tsa LED li bonts'a boemo ba module:
- REL1 - REL4 (e tala) - LED e BONAHALA ha relay e tsamaellanang e etsoa (motlakase oa NO o amana le COM);
- SIG (e khubelu) - e bontša boemo ba sesebelisoa hammoho le STA
- STA (e mosehla) - e bonts'a boemo ba sesebelisoa hammoho le SIG.
Linaha tse latelang li hlahisoa: - Ho qala mojule - ka mor'a ho bulela SIG le STA ho bulela motsotsoana, ka mor'a sena ho tima motsotsoana o mong.
- Ho batla marang-rang - ka mor'a ho qala, SIG e TŠOE, STA e bonesa (nako ea flash ea 200ms)
- E hokahane le marang-rang - ka mor'a hore ho be le khokahanyo e atlehileng ho marang-rang a selefouno, STA e bontša mofuta oa khokahanyo, ha SIG e bontša matla a pontšo.
STA e benya tse ling tsa 200ms ka nako ea 2s - ho na le khokahano ea GSM feela;
STA e benya habeli bakeng sa 200mS nakong ea 2s - ho na le likhokahano tsa GSM le 4G/3G/2G.
Ka nako e ts'oanang SIG e na le 5 e re:
SIG e khantša nako ea 1 nakong ea 2s - matla a pontšo a pakeng tsa 0 le 20%;
SIG e khanya ka makhetlo a 2 ka nako ea 2s - matla a pontšo a pakeng tsa 21 le 40%;
SIG e khanya ka makhetlo a 3 ka nako ea 2s - matla a pontšo a pakeng tsa 41 le 60%;
SIG e khanya ka makhetlo a 4 ka nako ea 2s - matla a pontšo a pakeng tsa 61 le 80%;
SIG e tiile ON - matla a pontšo a pakeng tsa 81 le 100%;
- Molaetsa oa phoso - haeba ho na le phoso ka mor'a ho qala, SIG e tla lula e tiile, STA e tla benya e bonts'a mofuta oa phoso.
STA e khantša tse ling bakeng sa 1s - nomoro ea mohala ea master ha e so beoe;
STA e benya ka ho sa feleng bakeng sa 1s ka nako ea 2s - phoso e sa feleng ea hardware.
Mokhoa oa ho qala o sebelisa USB
Tlhophiso ea pele ea TCG140-4 e etsoa ka komporo e sebetsang Windows 7 kapa sistimi e ncha ea Microsoft Windows. Ka mor'a hore motlakase o kenngoe, mochine o lokela ho hokeloa khomphuteng ka thapo ea USB. Hang ha thapo ea USB e hokahane, sistimi ea ts'ebetso e qala ka bo eona ho kenya bakhanni ba puisano le sesebelisoa. Molaetsa o latelang oa hlaha:
Li-driver tse latelang li tla kengoa:
- Sesebelisoa se kopantsoeng sa Microchip
- Mokhanni oa serial port oa USB
Haeba ka lebaka le itseng mokhanni oa koung ea serial oa USB o sa khone ho kengoa ka bohona, o tlameha ho kengoa ka letsoho.
Mokhanni a ka khoasolla leqepheng la sehlahisoa la TCG140-4 ho www.teracomsystems.com. Kamora ho kenya mokhanni ka katleho, sesebelisoa se tla tsejoa e le polokelo e ngata, fensetere e latelang e hlaha skrineng:
Eona feela file e bolokiloeng polokelong ea bongata ke sesebelisoa se bitsoang "TCNfig". Sesebelisoa sena se nolofalletsa puisano pakeng tsa TCG140-4 le PC. Kamora ho qala sesebelisoa sa TConfig, lenaneo le latelang le tla hlaha:
Ho tobetsa konopo ea "Start" ho tla qala sebatli mme o bonts'a leqephe la Tlhokomelo la TCG140-4 ea hau.
7.1. Leqephe la ho beha leihlo
Leqephe la ho beha leihlo le bonts'a maemo a hajoale a li-input/outputs tsa TCG140-4. Leqephe le na le likarolo tse 5 - "1-Wire sensors", "Modbus sensors", "Digital inputs", "Analog inputs" le "Relays".
Bakeng sa parameter e 'ngoe le e' ngoe (sensor, input, relay) ho na le tlhaloso ea litlhaku tse ka bang 15. Litlhaloso li ka fetoloa leqepheng la "Setup-Input/Output".
7.1.1. Karolo ea li-sensor
Ho na le likaroloana tse peli tsa li-sensor leqepheng - e 'ngoe bakeng sa li-sensor tsa 1-Wire le e' ngoe bakeng sa li-sensor tsa MODBUS RTU.
TCG140-4 e tšehetsa li-sensor tse fihlang ho tse robeli. Li ka hokahanngoa le li-interfaces ka bobeli ka karo-karolelano e sa reroang, e ka beoang karolong ea "Sensors ratio setup" leqepheng la Setup-> Sensors. Ka ho sa feleng, palo ea li-sensor tsa MODBUS RTU ke 4.
Li-sensor tsa 1-Wire kaofela li bonts'itsoe karolong e nyane ea "1-Wire sensors". Li-sensor li lokela ho hlophisoa karolong ea "1-Wire sensors setup" leqepheng la Setup-> Sensor.
Li-sensor tsohle tsa MODBUS RTU li bonts'oa karolong e nyane ea "Modbus sensors". Li-sensor li lokela ho eketsoa le ho hlophisoa karolong ea "Modbus RTU sensors" leqepheng la Setup-> Sensors.
Bakeng sa sensor e 'ngoe le e' ngoe, ho na le tlhaloso, boleng, ID, kapa lintlha tsa aterese. Bolelele ba tlhaloso bo fihla ho litlhaku tse 15. Litlhaloso li ka fetoloa leqepheng la Setup-> Maemo.
Li-sensor tse peli (mongobo-mocheso) li na le mekhahlelo e 'meli.
7.1.2. Karolo ea lisebelisoa tsa dijithale
Lisebelisoa tsa dijithale li ka sebelisoa bakeng sa ho lekola boemo ba lisebelisoa tsa discrete - sensor e sisinyehang, ho ikopanya le menyako, puisano ea relay, tlhahiso ea alamo, jj.
Litlhahiso tsa digital ke sampe etelletse pele ka 10ms. Phetoho ea boemo ba ho kenya e nkoa e nepahetse haeba boleng bo tšoanang bo baloa ka metsotsoana e 3 e latellanangamptlase (30ms).
Boemo ba mongolo o mong le o mong bo bontšoa ka mongolo le ka mebala.
Litlhaloso le litemana tsa boemo li ka fetoloa ho "Setup-Input/Output".
7.1.3. Karolo ea lisebelisoa tsa analoji
Lisebelisoa tsa analoge li ka sebelisoa bakeng sa ho beha leihlo matla a DCtagmehloli ea e - li-sensor tsa analog, libeteri, lisebelisoa tsa motlakase, lisebelisoa tsa letsatsi, joalo-joalo.
Lisebelisoa tsa analog 3 le 4 li ka sebelisoa hape bakeng sa ho beha leihlo li-sensor/transmitters tsa hona joale tsa 0-20mA. Mokhoa o ka fetoloa karolong ea "Setup-> Input / Output".
Lisebelisoa tsa analoge ke sampe etelletsoe pele ka potlako, empa boleng bo bocha ba 'nete bo fetotsoe ka metsotsoana e 0.5. Lipalo tsohle tse 250 lipakeng tsa liphetoho tsa boleng li lekantsoe.
Bakeng sa "Unit" e 'ngoe le e' ngoe ea analog, "Multiplier" le "Offset" e ka behoa karolong ea "Setup-> Input/Output".
7.1.4. Karolo ea relay
Karolo e bonts'a boemo ba hajoale ba li-relay. Relay e 'ngoe le e' ngoe e ka kengoa tšebetsong e le hole kapa sebakeng sa heno ho tsoa ho boemo ba paramente e shebiloeng. Bakeng sa li-relays tse kentsoeng sebakeng sa heno, ho hlaha mongolo o hlalosang paramethara e laolang eseng likonopo.
Pulse nako le liparamente bakeng sa ts'ebetso ea relay ea lehae li ka beoa ka thoko bakeng sa relay ka 'ngoe ho "Setup-> Input/Output-> Relay outputs".
7.2. Seta
7.2.1. SMS
Baamoheli ba alamo ea SMS ba ka hlophisoa karolong ena.
"Monghali" o na le litokelo tse khethehileng tsa ho fetola litlhophiso tsa lisebelisoa ho sebelisa litaelo tsa SMS. Nomoro ena e lula e fumana melaetsa ea alamo ea SMS.
Baamoheli ba 4 ba setseng ba ka fumana melaetsa ea SMS haeba e 'ngoe ea li-parameter e le maemong a alamo. Ho amohela melaetsa ea SMS bakeng sa nomoro e 'ngoe le e' ngoe e lokela ho lumelloa ka lebokose la "Alarm Notification". Baamoheli bana ba 4 le bona ba ka kopa ka SMS bakeng sa boemo ba paramethara / boleng.
Ka ho tobetsa konopo ea "Send test SMS" bohle ba amohelang li-SMS ba tla fumana SMS ea tlhahlobo.
Litaelo tsohle, syntax ea tsona, le likarabo li hlalositsoe ho "Seta ka SMS".
SMS ha se puisano e tšepahalang ebile ha e khothalletsoe joalo ka theknoloji ea ho beha leihlo.
7.2.2. Li-sensor
7.2.2.1. Sensors ratio setup
Karolelano lipakeng tsa li-sensor tsa 1-Wire le MODBUS RTU e ka beoa mona. Ka tloaelo, ke 4:4.
7.2.2.2. 1-Tlhahiso ea lisensara tsa terata
Ho sibolloa ha li-sensor tsa 1-Wire tse hokahantsoeng li etsoa ka mor'a matla kapa ka konopo "Scan".
Li-sensor tsohle tse fumanoeng li bonts'oa ka tatellano e nyolohang li bua ka nomoro ea tsona e ikhethang ea ID.
Hoa khoneha ho notlela sensor ea 1-Wire sebakeng se itseng. Ho etsa sena, li-sensor tsohle li lokela ho eketsoa ka bonngoe. Kamora ho eketsoa ka 'ngoe, scan e ncha e lokela ho etsoa 'me sensor e sa tsoa fumanoa e lokela ho notleloa sebakeng sa eona. Haeba li-sensor tsohle li notletsoe, ho tlosa "bohareng" ho ke ke ha fetola maemo a lisele tse ling ka mor'a ho tsosolosa. Khetho ena e na le thuso haholo ha TCG140-4 e sebelisoa e le karolo ea а tsamaiso ea tlhokomelo le taolo e laoloang ke litaelo tsa HTTP API.
7.2.2.3. Mokhoa oa puisano oa MODBUS RTU
TCG140-4 e tšehetsa MODBUS RTU holim'a sebopeho sa RS-485. Li-sensor tsohle tse hokahaneng le sebopeho sena li lokela ho sebetsa ka litlhophiso tse tšoanang tsa puisano.
Ka ho sa feleng, TCG140-4 e sebetsa le maemo a MODBUS RTU - 19200, E, 1.
Karolong e nepahetseng ea karolo, ho na le sesebelisoa sa ho hlahloba sebopeho sa MODBUS RTU. E le ho ntlafatsa nako ea ho hlahloba, nako e nepahetseng ea nako ea sensor le aterese e lokela ho hlophisoa, ka mor'a moo, konopo ea "Save" e ka tlaase ho leqephe e lokela ho hatisoa.
7.2.2.4. MODBUS RTU sensors
TCG140-4 e ts'ehetsa li-sensor tsa Teracom le tsa mokha oa boraro tsa MODBUS RTU.
Bakeng sa sensor e 'ngoe le e' ngoe, ho lokela ho hlophisoa aterese e nepahetseng ea MODBUS RTU, aterese ea ngoliso, tatellano ea data le mofuta oa data. Liphetoho tsohle li lokela ho bolokoa. Haeba li-setting li lokile likholomong tsa "Raw value" data e nepahetseng e tla bontšoa.
TCG140-4 e ts'ehetsa li-sensor tsa MODBUS RTU tse nang le nako ea karabelo lipakeng tsa 10 le 500ms.
Nako ea karabelo ea kamehla bakeng sa sensor e ncha ke 100ms. Ho khothalletsoa ho sebelisa nako e fokolang ea karabo e tiisitsoeng ke moetsi oa sensor. Kakaretso ea ba khethiloeng
nako ea karabelo bakeng sa sensor e 'ngoe le e' ngoe e theha nako e telele ea karabelo ea sistimi.
Nako ea likhetho ke nako e pakeng tsa lipalo tse peli tse latellanang tsa sensor e le 'ngoe. Nako e khethiloeng ea ho khetha e lekanya nako ea ts'ebetso ea sistimi. Ka tloaelo, ke motsotsoana o le mong.
Bohlokoa: Nako ea ho qetela ea karabo e ka se be ka tlase ho nako ea ho khetha.
Ts'ebetso eohle e tsoelang pele ea data e tala e ka mefuta e latelang:
- Float-point bakeng sa mefuta ea data ea phaphamala, 16-bit e sa saenang palo e felletseng le nomoro e saennoeng ea 16-bit.
Sebopeho sa float-point se na le 24-bit mantissa. - Float-point kapa palo e feletseng bakeng sa mefuta ea data 32-bit e sa saenang palo e feletseng le palo e feletseng e saennoeng ea 32-bit.
Sebopeho sa float-point se na le 24-bit mantissa.
Bakeng sa fomete e felletseng, lipalo tse nang le multiplier le offset lia fokotsoa.
7.2.2.5. Sesebelisoa sa ho seta sa sensor
Sehokelo sa sesebelisoa se fumaneha ka tlase ho serapa sa li-sensor tsa Modbus RTU. E ka sebelisoa bakeng sa liphetoho tsa ho seta puisano ea sensor kapa ho bala feela tlhahisoleseling ho tsoa ho rejisetara.
7.2.2.5.1. Tlhophiso ea puisano
Karolo e ts'oana le mokhoa o akaretsang oa puisano oa MODBUS RTU. Sebaka se secha feela ke aterese ea sensor.
Liphetoho tsa litlhophiso karolong ena ha li tšoaroe ka hlooho ebile ha li fetole litlhophiso tse akaretsang tsa TCG140-4.
7.2.2.5.2. Setapo sa rejisetara ea puisano ea li-sensor
Karolo ena ea sesebelisoa e sebelisetsoa ho hlahloba le ho fetola boemo ba lirekoto tsa puisano tsa sensor.
7.2.2.5.3. Tlhahlobo ea ngoliso ea kutlo
Karolo ena ea sesebelisoa e sebelisoa bakeng sa tlhahlobo e akaretsang ea li-sensor.
7.2.3. Kenyeletso/Sehlahisoa
7.2.3.1. Li-sensor
Bakeng sa sensor e 'ngoe le e' ngoe, tlhaloso, ho ka behoa matšoao a 15. Litlhaloso tsena li tla hlaha leqepheng la tlhahlobo, leqephe la maemo, data ea XML/JSON, SMS, le litemoso tsa lengolo-tsoibila.
Bakeng sa li-sensor tse ling, masimo a "Unit", "Multiplier" le "Offset" a teng ho fetolela boleng bo sa hlahisoang hore e be liyuniti tse nang le moelelo. Boleng bo lekantsoeng bo baloa ka:
SV[Un] = RV * MU + OF
Moo:
SV - boleng bo lekantsoeng (bo bontšitsoeng);
Un - yuniti;
RV - boleng bo tala ho tloha ho sensor;
MU - morekisi;
TSA - ho fokotsa.
7.2.3.2. Lisebelisoa tsa digital
Bakeng sa tlhahiso e 'ngoe le e 'ngoe ea dijithale, tlhaloso, matšoao a fihlang ho 15 le matšoao a fihlang ho a 15 a ka hlophisoa.
Litlhaloso tsena li tla hlaha leqepheng la tlhahlobo, leqephe la maemo, data ea XML/JSON, SMS, le litemoso tsa lengolo-tsoibila.
7.2.3.3. Lisebelisoa tsa analoge
Bakeng sa tlhahiso e 'ngoe le e' ngoe ea analog, tlhaloso, ho ka behoa matšoao a 15. Litlhaloso tsena li tla hlaha leqepheng la tlhahlobo, leqephe la maemo, data ea XML/JSON, SMS, le litemoso tsa lengolo-tsoibila.
Bakeng sa tlhahiso e 'ngoe le e 'ngoe ea analog, likarolo tsa "Unit", "Multiplier" le "Offset" li teng ho fetolela vol e tala.tage/hona joale hore e be likarolo tsa boenjiniere tse nang le moelelo. Boleng bo lekantsoeng bo baloa ka:
SV[Un] = RV * MU + OF
Moo:
SV - boleng bo lekantsoeng (bo bontšitsoeng);
Un - yuniti;
RV - matla a talatage tsoa mohloling;
MU - morekisi;
TSA - ho fokotsa.
ExampLe:
Bakeng sa sensor ea mongobo HIH-4000-003 lintlha tse latelang (ho tsoa ho database) lia fumaneha:
VOUT = 0.826 ho 0% RH
VOUT = 3.198 ho 75.3% RH
Litekanyetso tse tala ke voltage ka tlhahiso ea sensor. Haele hantle, re hloka ho tseba mongobo o lekanyelitsoeng (boleng bo lekantsoeng) eseng voltages. Likamano tsena tse peli li lekane ho bala bongata le ho fokotsa. Ha re li tseba, re ka khona ho bala hore na mongobo o lekanyelitsoeng o tsamaellana le molumo o mong le o mongtage sebakeng sa tšebetso.
Multiplier (MU) e baloa joalo ka ΔY/ΔX, bakeng sa sensor ena ΔRH%/ΔV:
MU = (75.3 – 0)/(3.198-0.826) = 75.3/2.372 = 31.745 %RH/V
Theko e baloa ho tloha ho e se e ntse e tsejoa ka bongata le kamano bakeng sa e 'ngoe ea lintlha: OF = MU * (0 - VOUT1) + RH1 = 31.745 * (0-0.826) + 0 = 31.745 * (-0.826) = -26.22
Sephetho se tšoanang se ka baloa bakeng sa ntlha ea bobeli: OF = MU * (0 - VOUT2) + RH2 = 31.745 * (0-3.198) + 75.3 = -101.52 + 75.3 = -26.22
Bakeng sa sensor ena, foromo e tla shebahala tjena: SV = RV * 31.745 - 26.22
Hlahloba VOUT = 0.826 V (0% RH): SV = 0.826 * 31.745 - 26.22 = 26.22 - 26.22 = 0 %RH
Boleng bo tšoanang bo ngotsoe ka har'a database.
7.2.3.4. Liphetho tsa relay
Bakeng sa relay e 'ngoe le e' ngoe, tlhaloso, ho ka behoa litlhaku tse ka bang 15. Litlhaloso tsena li tla hlaha leqepheng la ho beha leihlo, lintlha tsa XML/JSON, litemoso tsa SMS le lengolo-tsoibila.
Nako ea pulse e ka fapana bakeng sa relay e 'ngoe le e' ngoe. Qeto ke metsotsoana e 0.1, boleng bo phahameng ba pulse ke metsotsoana e 3600.
Li-relay tsohle li ka kengoa tšebetsong u le hole ka SMS/HTTP API kapa sebakeng sa heno ho tsoa maemong a paramente e shebiloeng. Setlhophiso sena se entsoe ho tsoa ho "Activated from" menu e theoha, likhetho tse ka khonehang ke:
- SMS / HTTP - ka ho khetha khetho ena liphetho tsa relay li ka hlahisoa ka SMS ho tsoa ho nomoro e lumelletsoeng kapa ka ho romella litaelo tsa HTTP API;
- Kenya tshebetsong.
Bakeng sa ts'ebetso ea lehae, maemo a alamo bakeng sa mehloli e fapaneng a sebelisoa. Li thehiloe karolong ea "Setup-> Conditions". Ho abela parameter ho relay, likhetho tse latelang lia khoneha: - S? – “S” e emetse “Sensor 1-Wire”. Relay e kentsoe ts'ebetsong ho tsoa ho boleng bo lekantsoeng ho tsoa ho sensor e boletsoeng ea 1-Wire le melao bakeng sa mekhahlelo e boletsoeng ho "Setup> Conditions".
Letšoao la lipotso le pata palo ho tloha ho 1 ho isa ho 8; - Ho kenya Analog?. Relay e kentsoe ts'ebetsong ho tsoa ho boleng bo lekantsoeng ka tlhahiso e boletsoeng ea analog le melao bakeng sa mekhahlelo e boletsoeng ho "Setup-> Conditions". Letšoao la lipotso le pata palo ho tloha ho 1 ho isa ho 4;
- Kenyelletso ea dijithale? Relay e latela boemo ba kenyo ea dijithale e boletsoeng. Letšoao la lipotso le pata palo ho tloha ho 1 ho isa ho 2;
- Alamo efe kapa efe. Relay e kentsoe tšebetsong maemong afe kapa afe a alamo.
Liphetoho tsohle likarolong tse ka holimo li bolokiloe ka ho tobetsa konopo ea "Save".
7.2.4. Maemo
Karolo ena e sebelisetsoa ho etsa parameterization ea "trigger" le maemo a tlhokomeliso bakeng sa li-sensor, analog, le lisebelisoa tsa digital.
7.2.4.1. Li-sensor le lisebelisoa tsa analog 
Bakeng sa sensor e 'ngoe le e' ngoe ho hlahisoa mefuta e 'meli ea masimo - e' ngoe bakeng sa maemo a trigger ("Min", "Max", le "Hys") le e 'ngoe bakeng sa ketso e batloang.
"Min" le "Max" li bonts'a moeli oa sebaka sa ho sebetsa bakeng sa parameter e behiloeng leihlo. Boemo ba "Max" bo qalang bo etsahala ha boleng bo feta ntlha e behiloeng ea trigger. Boemo ba "Min" bo qalang bo etsahala ha boleng bo le tlase ho feta ntlha e behiloeng ea trigger. Maemong ana ka bobeli, paramethara e shebiloeng e tsoa ka ntle ho sebaka.
Ho khutla ka bongata bakeng sa parameter e hlokometsoeng ho nahanoa ha boleng bo nyoloha ho feta (Min + Hys) kapa ka tlase ho (Max - Hys). Hysteresis ("Hys") e sebelisetsoa ho thibela ho qhoma ka mokhoa o feteletseng ha boleng bo fetoha ho potoloha ntlha ea ho qhomisa.
ExampLe:
TCG140-4, TST100, le hitara e loketseng li sebelisoa ho laola mocheso oa kamore. Mocheso o fokolang o batloang ke 19°C. Mocheso oa pele ke 17°C.
TST100 e abetsoe sebakeng sa pele bakeng sa li-sensor tsa 1-Wire.
Bakeng sa ts'ebetso ea Relay1 ea lehae ho tsoa ho Sensor1 e setiloe.
Liparamente tse latelang li behiloe bakeng sa Sensor1: Min=19, Max=100 le Hys=0.5.
Ha mojule o buletsoe, Relay1 e qala hang-hang hobane mocheso o shebiloeng o felile. Sena se bulela heater. Mocheso o ntse o phahama.
Ha mocheso o fihla ho 19.5 ° C (19.0 + 0.5) e ea sebakeng se fapaneng (sebaka sa trigger) 'me Relay1 e tima. Hitara e timiloe.
Mocheso oa theoha 'me ha o fihla ho 19 ° C o tsoa ka ntle (maemo a qalang le a ho lemosa). Relay e butsoe (heater e butsoe) 'me e-mail e romelloa.
Boleng ba "Max" bo behiloe hole ho lekana mocheso o batloang ho qoba maemo a bakang / tlhokomeliso e potolohileng eona.
Bakeng sa tlhahiso e 'ngoe le e' ngoe ea sensor kapa analog, ho na le mekhoa e 3 e ikemetseng ea tlhokomeliso ha ho na le boemo ba alamo - imeile, SMS, le poso (HTTP Post e nang le XML/JSON file). Mokhoa o mong le o mong oa tsebiso ea alamo o kengoa tšebetsong ke lebokose la tlhahlobo.
Lefatšeng ka bophara bakeng sa li-sensor tsohle le bakeng sa lisebelisoa tsohle tsa analog, ho na le lebokose la "Return notification". Haeba khetho ena e khethiloe ho tla ba le tsebiso hape ha parameter e khutla ka bongata.
Lefatšeng ka bophara bakeng sa li-sensor tsohle le bakeng sa li-analog tsohle, ho na le "temoso ea ho lieha ha tsebiso" parameter. E bohlokoa haholo joalo ka sesefa bakeng sa maemo a nakoana a alamo.
7.2.4.2. Lisebelisoa tsa digital
Bakeng sa tlhahiso e 'ngoe le e' ngoe ea digital, boemo ba alamo bo lokela ho khethoa. Litemana li se li setiloe leqepheng la "Input/output".
Ha tlhahiso e kena boemong ba alamo 4 tsela e ikemetseng ea tlhokomeliso e ka khoneha - imeile, SMS, poso (HTTP Post e nang le XML / JSON file) le MQTT phatlalatsa. Mokhoa o mong le o mong oa tsebiso ea alamo o kengoa tšebetsong ke lebokose la tlhahlobo.
Lefatšeng ka bophara bakeng sa lintho tsohle tse kentsoeng tsa dijithale, ho na le lebokose la "Khutlisa tsebiso". Haeba khetho ena e khethiloe ho tla ba le tsebiso hape ha parameter e khutla ka bongata.
Lefats'eng ka bophara bakeng sa lintho tsohle tse kentsoeng tsa dijithale, ho na le paramethara ea "temoso ea ho lieha". E na le thuso e le sefe bakeng sa maemo a nakoana a alamo.
Nakong eo tlhahiso e leng boemong ba alamo, ho "Leqephe la Tlhokomelo", ho kenya letsoho ho loketseng ho tla ba le mebala e khubelu.
Ho na le tieho e 'meli - ho tloha ho ea holimo le ho ea holimo ho ea holimo bakeng sa phetoho ea tlhahiso ea digital. Litieho tsena li eketsoa ho tieho e tloaelehileng ea 30ms. Li na le qeto ea metsotsoana e 0.1 'me ka ho sa feleng ke zero.
Likhetho tsena li ka sebelisoa bakeng sa ho sefa ho eketsehileng.
Setšoantšong se ka holimo ho tloha ho ea holimo ho ea holimo le ho tloha holimo ho ea holimo ho behiloe metsotsoana e 0.1.
7.2.5. Tsamaiso
Leqephe la litlhophiso tse ling tse akaretsang.
7.2.5.1. Boemo ba sisteme
Ho na le tlhahisoleseling mabapi le boemo bo akaretsang ba mojule mona.
Sebaka se le seng feela se ka khonehang mona ke lebokose la "Data in roaming". Ka kamehla, e koetsoe ho qoba litefiso tse eketsehileng bakeng sa phetiso ea data ho roaming.
Haeba o sebelisa karete ea opareitara e mong, o tlameha ho kenya tšebetsong “Data in roaming”. Ho seng joalo, u ke ke ua khona ho sebelisa lits'ebeletso tsohle tsa data - li-imeile, HTTP Post, NTP, joalo-joalo.
7.2.5.2. Tlhophiso ea khokahano ea data
Litlhophiso tsena li ka fapana bakeng sa opareitara e 'ngoe le e 'ngoe ea mohala. Ka ho sa feleng, APN (Lebitso la Sebaka sa ho Fumana) ke "internet". Basebelisi ba bang ba mehala ba ka hloka lebitso la mosebelisi le password.
Marang-rang a etsa qeto ea mofuta oa tšebeletso ea mohala - 2G, 3G, kapa 4G LTE. Ka ho sa feleng, ke AUTO - tšebeletso e phahameng ka ho fetisisa e ka khonehang ea moloko o tla sebelisoa boemong ba hona joale.
7.2.5.3. Seta bocha khokahano ea marang-rang ea mohala
Bakeng sa libaka tse nang le mats'oao a fokolang kapa moo marang-rang a mohala a theohang hangata, ho ka sebelisoa ho qala bocha ka boiketsetso. Sena se ka thibela ho lahleheloa ke khokahano ea sesebediswa ruri.
Ho qala bocha ho tla etsoa hang ka letsatsi.
Ka ho sa feleng, ho qala bocha ka othomathiki ho koetsoe.
7.2.5.4. Tlhophiso e akaretsang
Karolo ke ea litlhophiso tse ling tse akaretsang.
Thempereichara le likarolo tsa khatello li ka fetoloa ka tse ratoang.
Mokhoa oa ho ngola o fetola ho tsamaisana le WEB sehokelo le SMS.
Lebitso la moamoheli, Lebitso la sistimi, Sebaka sa sistimi le Lebitso la Tsamaiso li romelloa ka XML/JSON files mme e ka sebelisoa bakeng sa tlhaiso-leseling e bonolo ea sesebelisoa. Litekanyetso tsena li ka kenyelletsoa hape 'meleng oa li-imeile.
Mabokose a ka ho le letona a hlalosa seo u lokelang ho se bona ho "Leqephe la Tlhokomelo". Ka ho sa feleng, kaofela ha tsona li buletsoe.
7.2.5.5. Sesebelisoa se qala hape
Karolong ena, ho na le likonopo tsa ho qala sesebelisoa hape le ho seta ho li-setting tsa kamehla tsa feme.
7.2.6. NTP
RTC ea ka hare (oache ea nako ea sebele) ea mojule e ka hlophisoa ka letsoho kapa ka bo eona.
Bakeng sa ho hokahanya oache ea othomathike, mojule o ts'ehetsa NTP (Network Time Protocol) mme liparamente tsohle tse hlokahalang bakeng sa kamahanyo ea othomathiki lia fumaneha karolong ena.
Kamahanyo ea oache e etsoa ho "Period" e behiloeng. Haeba teko e sa atleha, khokahano e latelang e tla ba ka nako ea "Haeba e sa fumanehe".
Ho tobetsa konopo ea "Save and synchronize" ho qala kamahanyo ea nako. Tlhahisoleseding ea "Boemo" lebokoseng le leputsoa le thusa haholo bakeng sa ho fumaneha ha seva sa nako le Inthanete ho hang.
Nako ea hajoale ea sistimi e romelloa ka XML/JSON file ha HTTP Post e nolofalitsoe.
Ka kamehla, khokahano ea NTP e ea lumelloa, seva - time.google.com:123, Nako ea sebaka 00.00 le nako ea lihora tse 12.
Litlhophiso le tšebeletso ho hang li ka hlahlojoa ka lisebelisoa tse teng karolong ea Teko ea NTP.
7.3. Litšebeletso
7.3.1. SMTP
Leqephe lena le sebelisetsoa ho kenya litlhophiso tse nepahetseng tsa SMTP bakeng sa litlhokomeliso tsa lengolo-tsoibila le liaterese tsa baamoheli.
7.3.1.1. Ho theha SMTP
Aterese ea seva ea mangolo e ka hlophisoa ka lebitso la moamoheli (smtp.gmail.com) kapa ka aterese ea IP.
Li-imeile li ka romelloa ka khokahanyo e patiloeng kapa ntle le eona.
Boema-kepe ba kamehla ba SMTP ntle le encryption ke 25. Hoo e ka bang bohle ba ISP ba thibela boema-kepe bona ho qoba litlhaselo tsa linokoane. Botsa ISP ea hau bakeng sa lintlha.
Mokhoa o le mong o tšehetsoeng oa khokahano e patiloeng ho tsoa ho li-server tse ngata tsa sechaba tsa imeile keTLS. TCG140-4 e ts'ehetsa TLS 1.0, TLS 1.1, le TLS 1.2 ka li-suites tse ngata tsa cipher. Sena se tiisa ts'ebetso e atlehileng hoo e ka bang li-server tsohle tsa sechaba.
Eba hlokolosi ka mantsoe a SSL, TLS, le STARTTLS a sebelisitsoeng ho litlhophiso tsa seva ea lengolo-tsoibila, tse fanoeng ke mofani oa litšebeletso. Bafani ba bang joalo ka Gmail ba sebelisa SSL sebakeng sa TLS le TLS ho fapana le STARTTLS. Sena se ka baka likhohlano le nomoro ea boema-kepe. Bakeng sa mohlalaampLeha ho le joalo, litlhophiso tse nepahetseng bakeng sa Gmail ke:
- TLS boema-kepeng 465 kapa
- STARTTLS boema-kepeng ba 587.
Motho ea romellang lengolo-tsoibila, lebitso la mosebelisi, le password ke lintlha tse tloaelehileng tsa netefatso. Bakeng sa li-SMTP tse ngata, lengolo-tsoibila le lebitso la mosebelisi lia tšoana.
Ho na le konopo ea tlhahlobo ea litlhophiso tsa seva e nang le maikutlo. Tekong ena moromeli le moamoheli oa lengolo-tsoibila o tšoana.
7.3.1.2. Sebaka sa alamo
Ho ka behoa batho ba ka bang 5 ba amohelang mangolo-tsoibila. Moamoheli e mong le e mong a ka kengoa tšebetsong a le mong ka lebokose la ho hlahloba.
7.3.1.3. Lintlha tsa lengolo-tsoibila
Taba, hlooho ea 'mele,' mele le botlaaseng ba 'mele li ka etsoa ka mokhoa o ikhethileng. Bakeng sa tlhophiso ena, ho sebelisoa sete ea linotlolo. Tsohle li hlalositsoe leqepheng.
7.3.2. Logger
The logger sebetsa ka mekhoa e meraro - Nako, Alamo, le Nako & Alamo. Mokhoa o hlalosa hore na ke eng e qalang tlaleho mohopolong oa logger.
Ka mokhoa oa Nako, litlaleho li etsoa nako le nako "nakong ea ho rema lifate". Ka Alarm mode, lirekoto li etsoa maemong afe kapa afe a alamo. Boemong ba Nako le Alamo, ho sebelisoa motsoako oa maemo a mabeli bakeng sa lirekoto.
Nako ea ho rema lifate e lekanya nako pakeng tsa litlaleho tse peli. Ho molemo ho hopola hore ka ho fokotsa nako ea ho rema lifate, re eketsa qeto, empa hape re fokotsa nako e fetileng eo re nang le litlaleho tsa eona.
Lirekoto tsa logger li ka amahanngoa le motsotso o itseng ka hora. Ho lumellana ho molemo haholo ha ho lekoa motlakase, metsi, limithara tsa khase, joalo-joalo. Nako ea ho rema lifate e ka khethoa ho tloha ho menu e theoha pakeng tsa 1 le 60 metsotso. Sebaka sa "Sync to the minute" se etsa qeto ea hore na ke motsotso ofe oa hora o sebelisetsoang ho amahanya. Leha motsotso ofe kapa ofe o ka khethoa, ho molemo ho sebelisa boleng ba kamehla - 00.
ExampLe:
Litlhophiso tsa hajoale ke:
- Nako ea joale = 09:12
- Khokahano ea rekoto ea logger = Nolofatsa;
- Sync ho motsotso = 00;
- Nako ea ho rema lifate = metsotso e 15.
Litlhophiso li khetholla lirekoto tse 4 ka hora ho HH:00, HH:15, HH:30, le HH:45.
Sesebelisoa se matlafalitsoe.
Rekoto ea pele e tla ba hang ka mor'a ho tima - 09:12. Lirekoto tse latelang li tla ba ka 09:15,09:30, 09:45, 10:00, 10:15, joalo-joalo.
Ho na le mekhoa e 'meli ea ho fihlella lirekoto tsa logger:
- khoasolla lethathamo le felletseng file, sebelisa "Download log full" ho WEB sebopeho;
- kenya lirekoto tsa ho qetela tse sa romelloang ho seva e inehetseng ea HTTP.
Lirekoto li ka romelloa ho CSV file fomata ka HTTP/HTTPS Post.
Nako ea CSV Post e ka khethoa ho tsoa ho menu pakeng tsa lihora tse 1 ho isa ho tse 24. Haeba o nolofalletsa tšebeletso ena, hlokomela oache ea nako ea sebele (tšebeletso ea NTP).
"Server" bakeng sa CSV Post e ka ba domain kapa aterese ea IP empa hlokomela litlhophiso tsa DNS.
"Nako ea Sync" ke motsotsoana oa letsatsi leo ka lona nako ea CSV Post e hokahanngoang.
ExampLe:
Nako ea hajoale ke 19:31, nako ea CSV Post ke lihora tse 3 mme nako ea Sync ke 9:00.
Ho amahanya logger ho 9:00 ho bolela hore nako ea ho kenya e tla ba: 09:00, 12:00, 15:00, 18:00, 21:00, 24:00, 03:00 le 06:00. Phatlalatso ea pele, ka mor'a ho lumella sereta ka 19:31, e tla ba ka 21:00.
Konopo "Force CSV Post" e qala ho kenya lintlha tse rekotiloeng ho tloha nakong e fetileng ea nako le nako ho tla fihlela joale.
Sehlooho sa boitsebiso se eketsa Hostname, Lebitso la Sistimi, Sebaka sa Sisteme, le Lebitso la Tsamaiso ho
qalo ea CSV e 'ngoe le e 'ngoe file. Khetho ena e thusa ho tseba litlaleho ho litsamaiso tse sebelisang CSV files feela.
Ka ho sa feleng, sereti se koetsoe.
Tse ling ka logger li ka fumanoa karolong ea Data logger.
7.3.3. XML/JSON file HTTP Post
HTTP Post e sebelisetsoa ho kenya XML/JSON nako le nako file ho seva ka likopo tsa HTTP/HTTPS (Mokhoa oa poso). The file e na le boemo ba hajoale ba liparamente tsohle tse shebiloeng le tlhaiso-leseling e eketsehileng ea sistimi. The file fomate e khethoa ho tsoa ho menu e theoha.
Li-server tsa HTTP li ka rarolloa ka lebitso la domain kapa aterese ea IP.
"Period" e ka beoa lipakeng tsa 1 min le lihora tse 48. Paramethara ena e ka fetoloa u le hole ka taelo. "Period" e etsa qeto ea nako eo software ea taolo e fumanang boitsebiso ba morao-rao ho tloha TCG140-4 'me ka hona e ka etsa liphetoho ho tse ling tsa litekanyetso. Nako e khutšoanyane ke "Period", e haufi le ts'ebetso ea nako ea sebele ke tsamaiso. Ka lehlakoreng le leng, "Period" e khuts'oane joalo ka ha sephethephethe sa data se feta marang-rang a mobile.
Haeba lebokose le reng "Hokela ho alamo efe kapa efe" le khethiloe, HTTP Post e tla romelloa ka alamo efe kapa efe.
Sebaka sa "Key" se hlalosoa ke mosebedisi. Boleng ba eona bo fumaneha ka XML/JSON file mme e ka sebediswa bakeng sa boitsebiso ba sesebediswa.
Haeba "Ts'ebetso ea Karabo" e nolofalitsoe, TCG140-4 e tla phethahatsa litaelo, tse rometsoeng ke seva e hole e le karabo ea HTTP/HTTPS Post.
Tse ling ka HTTP/HTTPS Post li ka baloa karolong ea HTTP API.
7.4. MQTT
Sesebelisoa se tšehetsa MQTT 3.1.1. Leqephe lena ke la litlhophiso tsa MQTT.
7.4.1. Tlhophiso e akaretsang ea MQTT
7.4.2. Sehlooho sa li-Sensors tsa MQTT
7.4.3. Sehlooho se kenyang Analog ea MQTT
7.4.4. MQTT Digital inputs sehlooho
7.5. GSM geolocation
GSM geolocation ke mokhoa oa ho tseba boemo ntle le tšebeliso ea GPS. Ho sebelisoa feela lintlha tse tsoang marang-rang a mehala. Lintlha li romelloa ho opareitara ea motho oa boraro e khutlisetsang likhokahano tsa sesebelisoa ka nepo.
Boemo ha bo nepahale ha bo bapisoa le GPS, empa bo sebetsa le ka tlung. E loketse ka ho khetheha bakeng sa ho lata liphutheloana, mekotla e bonts'ang ka sehatsetsing, lihatsetsi, mechine le lisebelisoa tse sebetsang moo ho se nang pontšo ea GPS.
TCG120-4 e ts'ehetsa basebelisi ba latelang - Google, Quectel, le Unwired Labs. Ts'ebeletso e hloka ho ingolisa le opareitara.
7.6. Tsamaiso
7.6.1. bekapo/Khutlisa
TCG140-4 e ts'ehetsa ho boloka le ho khutlisetsa litlhophiso tsohle tsa basebelisi. Litlhophiso tsohle li bolokiloe ka "backup" ea XML file.
Sena file e ka sebelisoa ka mor'a sena ho tsosolosa litlhophiso tse tšoanang ho lisebelisoa tse ngata. Sena se bohlokoa haholo bakeng sa ho atisa litlhophiso tse tšoanang ho sehlopha sa li-module.
7.6.2. Tlhahisoleseling ea FW
TCG140-4 e ts'ehetsa ntlafatso ea firmware ho feta WEB segokahanyi.
Khoasolla firmware ea morao-rao ho tsoa www.teracomsystems.com, khetha ea file, ebe o tobetsa konopo ea "upload".
Ela hloko! Se ke oa tima phepelo ea motlakase nakong ea ntlafatso. Ho tima phepelo ea motlakase ho tla senya sesebelisoa.
Seta ka SMS
TCG140-4 e ts'ehetsa litaelo tsa SMS bakeng sa phetoho ea paramethara, litlaleho tsa boemo, le ntlafatso ea firmware moeeng. Litaelo li tla etsoa feela haeba li tsoa linomoro tsa mohala tse fumanehang karolong ea "SMS setup". Litaelo li hloka litokelo tse fapaneng (master/user).
Ka tlase ke lenane la litaelo tsa SMS tse tšehetsoeng. Hlokomela hore tlhaku ya underscore “˽” e tlameha ho nkelwa sebaka ke tlhaku e le nngwe ya sebaka.
- Beha nomoro e ncha ea master
Litokelo: Monghali
Syntax:
set˽master˽
Hokae
ke nomoro ea mohala ka mokhoa oa machaba
Example
Taelo: seta master +359885885885
Karabo:
Ke uena monghali e mocha! - Beha linomoro tsa basebelisi ba SMS - molaetsa ona o sebelisetsoa ho eketsa / ho hlakola basebelisi ba SMS
Litokelo: Monghali
Syntax:
set˽sms˽mosebelisi˽ :
Hokae
ke nomoro ea mohala ka mokhoa oa machaba
e ka ba u1, u2, u3 kapa u4
Example
Taelo: seta mosebelisi oa sms u1:+359885887766
Karabo:
u1:+359885887766,u2,u3,u4
Taelo: seta mosebelisi oa sms u2:+359885999888
Karabo:
u1:+359885887766, u2:+359885999888,u3,u4
Taelo: seta mosebelisi oa sms u1:
Karabo:
u1, u2:+359885999888,u3,u4 - Hlahisa linomoro tsa basebelisi ba SMS
Litokelo: Monghali, Basebelisi
Syntax:
bonts'a sms˽basebelisi
Example
Taelo: bonts'a basebelisi ba li-sms
Answer: m:+359885885885,u1:+359885887766,u2:+359885999888,u3,u4 - Beha basebelisi ba lengolo-tsoibila - molaetsa ona o sebelisetsoa ho eketsa / ho hlakola basebelisi ba lengolo-tsoibila
Litokelo: Monghali
Syntax: set˽email˽user˽ :
Hokae
– aterese ya imeile e sebetsang
e ka ba e1, e2, e3, e4 kapa e5
Example
Taelo: seta mosebelisi oa lengolo-tsoibila e1: mail1@teracomsystems.com
Karabo: e1: mail@teracomsystems.com
Taelo: seta mosebelisi oa lengolo-tsoibila e2: mail2@teracomsystems.com
Karabo: e2: mail2@teracomsystems.com
Taelo: seta mosebelisi oa lengolo-tsoibila e2:
Karabo: e2: - Hlahisa basebelisi ba lengolo-tsoibila - molaetsa ona o sebelisetsoa ho kopa lengolo-tsoibila la mosebelisi
Litokelo: Monghali, Basebelisi
Syntax: display˽email˽
Hokae e ka ba e 'ngoe ea: e1, e2, e3, e4 kapa e5
Example
Taelo: bonts'a lengolo-tsoibila e1
Karabo: e1: mail1@teracomsystems.com
Taelo: bonts'a lengolo-tsoibila e2
Karabo: e2: mail2@teracomsystems.com - Boemo ba sistimi - bo kopa li-parameter tse kholo tsa sesebelisoa
Litokelo: Monghali, Basebelisi
Syntax:
boemo ˽ sistimi
Example
Taelo: tsamaiso ea boemo
Answer: 06.01.2021,16:09:06,4G=y,ss=80%,fw=1.00 - Boemo ba paramethara - e kopa boemo ba tlhahiso ea dijithale (di), tlhahiso ea analog (ai), relay (r)
le li-sensor
Litokelo: Monghali, Basebelisi
Syntax:
boemo˽
Hokae
ke e 'ngoe ea: di1, di2, ai1, ai2, ai3, ai4, r1, r2, r3, r4, s11, s12, s21, s22, s31, s32, s41, s42, s51, s52, s61, s62, s s71, s72, s81
Example
Taelo: boemo ba di1
Karabo: di1(Garage_door)=CLOSED
Taelo: boemo s22
Karabo: s22(Ofisi)=34.5%RH - Beha sebaka sa marang-rang - molaetsa ona o sebelisetsoa ho tima / ho tima tlhahiso e khethiloeng ea relay
Litokelo: Monghali, Basebelisi
Syntax: set˽ = ˽[khetho] Hokae
ke r1, r2, r3 kapa r4
e butswe, e tima
[khetho] -w
Example
Taelo: beha r1=on
Karabo:
r1=ka,r2=tima,r3=theoha,r4=theoha
Taelo: seta r1=tima
Karabo: r1=theoha,r2=theoha,r3=theoha,r4=theoha
Taelo: beha r1=off,r2=on,r3=on,r4=on
Karabo: r1=off,r2=on,r3=on,r4=on
Taelo: beha r1=on -w
Karabo: ha ho karabo
Taelo: beha r2=off,r4=off -w
Karabo: ha ho karabo - Seta pulse relay - molaetsa ona o sebelisetsoa ho otla tlhahiso e khethiloeng ea relay
Litokelo: Monghali, Basebelisi
Syntax: set˽ = ˽[khetho] Hokae
< pulse relay > ke pl1, pl2, pl3 kapa pl4
e ntse e tsoela pele
[khetho] -w
Example
Taelo: seta pl1=on
Karabo: r1=ka,r2=theoha,r3=theoha,r4=buela
Taelo: set pl1=on,pl2=on,pl3=on,pl4=on
Karabo: r1=on,r2=on,r3=on,r4=on
Taelo: set pl1=on -w
Karabo: ha ho karabo
Taelo: set pl1=on,pl4=on -w
Karabo: ha ho karabo - Poso URL – lihlopha URL bakeng sa XML/JSON HTTP Post
Litokelo: Monghali
Syntax: set˽purl= kapa set˽purl2=
Hokae
ke aterese ea seva e hole (domain kapa IP)
Example
Taelo: seta purl=www.teracomsystems.com:8801/posttest.php
Karabo: lequrl=www.teracomsystems.com:8801/posttest.php,poso=ka, nako=00:01:00
Taelo: seta purl2=www.teracomsystems.com:8802/posttest.php
Karabo: lequrl2=www.teracomsystems.com:8802/posttest.php,poso=ka, nako=00:01:00 - Boemo URL – boemo URL's bakeng sa poso ea XML/JSON HTTP
Litokelo: Monghali, Mosebelisi
Syntax: boemo˽purl kapa boemo˽purl2
Example
Taelo: boemo purl
Karabo: lequrl=www.teracomsystems.com:8801/posttest.php, poso=ka,nako=00:01:00
Taelo: boemo purl2
Karabo: lequrl2=www.teracomsystems.com:8802/posttest.php, poso=ka,nako=00:01:00 - Nako ea poso ka metsotsoana - e beha nako ea poso ea XML/JSON HTTP ka metsotsoana
Litokelo: Monghali
Syntax: set˽pper=
Hokae
ke nomoro e lipakeng tsa 60 le 172800 (metsotsoana)
Example
Taelo: set pper=120
Karabo: post=off,nako=00:02:00 - Nako ea poso ka hh:mm:ss - e beha nako ea poso ea XML/JSON HTTP ka hh:mm:ss
Litokelo: Monghali
Syntax: set˽pperh=
Hokae
ke nomoro pakeng tsa 00:01:00 le 48:00:00
Example
Taelo: set pper=00:05:00
Karabo: post=off,nako=00:05:00 - Post on - e beha XML/JSON HTTP Post on
Litokelo: Monghali
Syntax: set˽post=buele
Example
Taelo: beha poso=ho
Karabo: poso=ka,nako=00:02:00 - Phahamisa - e beha XML/JSON HTTP Post e tima
Litokelo: Monghali
Syntax: beha poso=tima
Example
Taelo: beha poso=tima
Karabo: post=off,nako=00:02:00 - MQTT e buletswe – e seta MQTT
Litokelo: Monghali
Syntax: set˽mqtt=on
Example
Taelo: beha mqtt=on
Karabo: mqtt=on,mdata=json,period=00:05:00 - MQTT e tima – e emisa MQTT
Litokelo: Monghali
Syntax: set˽mqtt=off
Example
Taelo: seta mqtt=tima
Karabo: mqtt=off,mdata=json,period=00:05:00 - Nako ea MQTT - e beha nako ea phatlalatso ea MQTT
Litokelo: Monghali
Syntax: set˽mper=
Hokae
e pakeng tsa 00:01:00 le 48:00:00 (hh:mm:ss)
Example
Taelo: set mper=00:05:00
Karabo: mqtt=on,mdata=json,period=00:05:00 - MQTT data – e seta sebopeho sa data sa MQTT
Litokelo: Monghali
Syntax: set˽mdata=
Hokae
ke "json" kapa "thota"
Example
Taelo: beha mdata=thoko
Karabo: mqtt=on,mdata=thota,nako=00:05:00 - Seva ea MQTT – e seta seva sa MQTT
Litokelo: Monghali
Syntax: set˽murl=
Hokae
ke aterese ea seva e hole (domain kapa IP)
Example
Taelo: seta murl= www.teracomsystems.com
Karabo: mqtt=on,murl= www.teracomsystems.com,boemakepe=1883 - Boema-kepe ba MQTT - seta boema-kepe ba MQTT
Litokelo: Monghali
Syntax: set˽mport=
Hokae
ke kou ea MQTT
Example
Taelo: set mport= 8883
Karabo: mqtt=on,murl= www.teracomsystems.com,boemakepe=8883 - Beha sebaka sa nako
Litokelo: Monghali
Syntax: set˽tz=±hh:mm
Example
Taelo: set tz=+03:00
Karabo: ts=time.google.com:123,tz=+03:00 - Qala bocha – qala sesebelisoa bocha
Litokelo: Monghali
Syntax: qala hape
Example
Taelo: qala hape
Karabo: Sesebelisoa se qala hape! - Romela lengolo-tsoibila la tlhahlobo - molaetsa oa ho romella lengolo-tsoibila la tlhahlobo ho basebelisi ba lengolo-tsoibila
Litokelo: Monghali
Syntax: test˽imeile
Example
Taelo: lengolo-tsoibila la teko
Karabo: Li-imeile lia romelloa! - Romella tlhahlobo ea SMS - molaetsa oa ho romella tlhahlobo ea SMS ho basebelisi ba lumelletsoeng
Litokelo: Monghali
Syntax: test˽sms
Example
Taelo: hlahloba li-sms
Karabo: Ena ke SMS ea teko! - Apdeita – molaetsa oa ho nchafatsa sesebelisoa moeeng (o hloka LTE/WCDMA/GPRS)
Litokelo: Monghali
Syntax: update˽URL>
Hokae
<URL> e nepahetse URL ho seva ea sechaba, ho supa ntlafatso (.cod) file
Example
Taelo: nchafatsa www.teracomsystems.com/docs/TCG140-4-v1.000-PS.cod
Karabo ea 1: E khoasolla firmware...
Karabo ea 2: Firmware file downloaded. E ntse e ntlafatsa...
Likarabo tse latelang li ka khoneha maemong a fapaneng:
Karabo: File phetolelo e senyehileng kapa e fosahetseng!
Karabo: Ha e khone ho hokela ho seva!
Karabo: Nako ea ho jarolla e felile!
Karabo: 4G/3G/2G ha e kopane!
Karabo: Khokahano e lahlehile!
Karabo: Nako ea karabelo e felile!
Karabo: Phoso ea socket! - Seta ho seta bocha khokahano ea netweke ea Mobile
Litokelo: Monghali
Syntax: seta mncr= ,hh:mm:ss
Hokae
- "bulela" kapa "tima"
Example: nolofalletsa ho seta bocha marang-rang a mehala le ho beha nako
Taelo: beha mncr=on,10:00:00
Karabo: mncr=ka,10:00:00
Example: tima ho seta bocha khokahano ea marang-rang ea mehala
Taelo: seta mncr=tima
Karabo: mncr=off,10:00:00 - Beha tieho ea tsebiso ea kutlo
Litokelo: Monghali
Syntax: set delsen=xxxx
moo
xxxx - ho lieha ha tsebiso ka metsotsoana (0-3600)
Example: Taelo: set delsen=5
Karabo: delsen=5 - Beha meeli ea sensor
Litokelo: Monghali
Syntax:
beha lspt=naaaa,xbbbb,ycccc
moo
nomoro ea sensor ea p; litekanyetso tse nepahetseng 1,2,3 kapa 4;
t parameter ea sensor; boleng bo nepahetseng 1 kapa 2;
n e emetse “Min”
boleng ba aaaa bakeng sa moeli "Min";
x e emetse "Max"
boleng ba bbbb bakeng sa moeli "Max"
y e emetse "Hys"
boleng ba cccc bakeng sa "Hys".
ExampLe:
sete ea sensor 1 parameter 1 (mocheso):
Taelo: seta ls11=n25.0,x35.0,y1.0
Karabo:
ls11=n25.0,x35.0,y1.0
Taelo: seta ls11=n31.0
Karabo:
ls11=n31.0,x35.0,y1.0
ExampLe: sete ea sensor 1 parameter 2 (mongobo):
Taelo: seta ls12=n45.0,x60.0,y1.0
Karabo: ls12=n45.0,x60.0,y1.0
Protocols le API
9.1. HTTP API
HTTP ke protocol e tsebahalang haholo bakeng sa ts'ebetsong ea litsamaiso tsa SCADA tsa ho lekola le ho laola hole. Litsamaiso tsena li hahiloe holim'a theknoloji ea li-client-server.
TCG140-4 e ts'ehetsa mokhoa oa bareki - HTTP/HTTPS Post. Sena se etsa hore sesebelisoa se sebelisane le software eohle ea SCADA e tsamaisang HTTP protocol.
9.2. XML/JSON file HTTP Post
Ha ts'ebeletso ena e sebetsa, nako le nako module e romella HTTP Post ho seva. Poso e na le XML kapa JSON file ka boemo ba hajoale ba liparamente tse shebiloeng.
Liprothokholo tsa HTTP le HTTPS lia tšehetsoa.
The Post e ka romeloa hape ka boemo ba alamo - e le papiso ea leraba la SNMP.
Ho poso e 'ngoe le e' ngoe ea HTTP, seva se khutlisetsa karabo ho latela protocol ea HTTP. Ke feela haeba "Ts'ebetso ea Karabo" e nolofalitsoe, TCG140-4 e tla phethahatsa litaelo tse teng karabong.
Ho seng joalo, sesebelisoa se tla felisa khokahanyo hang ka mor'a karabo.
Parameter ea bohlokoa haholo puisanong ena ke nako ea HTTP Post. Ka nako e khuts'oane sesebelisoa se hlahisa sephethephethe sa data, empa sena se boloka tlhahisoleseling le monyetla oa ho laola sesebelisoa haufi le "nako ea sebele".
Nako ea HTTP Post e ka fetoloa ke seva ka taelo e nepahetseng ea HTTP. Sena se etsa hore puisano e be bonolo haholo.
9.2.1. Litaelo
Litaelo tsa TCG140-4 li romelloa 'meleng oa karabo oa kopo ea HTTP Post. Sebopeho sa taelo ke:
beha yy=xxx
Moo: yyy ke taelo;
xxx ke parameter.
ExampLe:
set r1=on - e tla bulela relay 1.
beha FIN - e tla felisa seboka.
Lenane le felletseng la litaelo le fumaneha ho 9.4.
9.2.2. Seboka se tloaelehileng sa puisano
Ka tlase ke kopano e tloaelehileng ea puisano lipakeng tsa TCG140-4 le seva e hole, e nang le "Process Answer" e nolofalitsoeng:
- Sesebelisoa se romela kopo ea HTTP Post (1) ka data ea XML / JSON ho seva se hōle ebang ke ka nako ea Post kapa ka boemo ba alamo;
- Seva e khutlisa karabo ea HTTP (2), e nang le taelo ea "set r1=on" e le mongolo o mokhutšoane 'meleng oa molaetsa;
- Sesebelisoa se romela kopo e ncha ea HTTP Post (3) e nang le data e nchafalitsoeng ea XML / JSON, e tiisang ho etsoa ha taelo ea "set r1 = on";
- Seva e khutlisa karabo e ncha ea HTTP (4), e kenyelletsang "set FIN" 'meleng oa molaetsa. Sena se bontša hore ha ho na litaelo tse emetseng 'me lenaneo le ka koaloa;
- Nakong e latelang ea HTTP Post, TCG140-4 e romela kopo e ncha ea HTTP Post (5) ho seva;
- Seva e araba ka "set FIN" (6) - ha ho na litaelo tse emetseng 'me lenaneo le ka koaloa.
Sesebelisoa se tloaelehileng sa ho beha leihlo se bontšitsoe ka tlase:
Ts'ebeletso ea XML/JASON HTTP Post e ka lekoa ho latela mehato e ka tlase:
- Boloka khoutu e latelang joalo ka post.php:
<?php
hlalosa (“FILENAME”, 'status.xml');
hlalosa("FOLDER", ”);
hlalosa(“SEPARATOR”, ”);
define(“STR_SUCCESS”, 'set FIN');
define(“STR_ERROR”, 'error');
haeba($_SERVER['REQUEST_METHOD'] == 'POST'){
$datePrefix = letsatsi('YmdHis', strtotime('hona joale'));
$pathname = FOLDER.SEPARATOR.$datePrefix.'_'.FILENAME;
$Postdata = file_get_contents("php://input");
$ tšoara = fopen($pathname, 'w+');
$ content = var_export ($ postdata, 'nete);
fwrite($handle, substr($ content, 1, strlen($ content)-2));
fclose($ handle);
echo (($handle === bohata) ? STR_ERROR : STR_SUCCESS).”\r\n”;
}
tse ling {
echo "Mongolo oa PHP oa sebetsa!";
}
?> - Kopitsa poso.php file ho a WEB seva e nang le tšehetso ea PHP. Seva e lokela ho ba le ponahalo ho tsoa Marang-rang. UniServer le XAMP ke tsona tse tsebahalang haholo WEB li-server tsa Windows.
- Ho netefatsa hore mongolo o sebetsa hantle, thaepa URL (mohlalaample www.yourserverURL.com/post.php) ho WEB sebatli. Haeba tsohle li lokile, a WEB leqepheng la “The
Sengoloa sa PHP sea sebetsa! ” e tla bontšoa. - Kenya ts'ebeletso ea poso ea XML/JSON HTTP ho www.yourserverURL.com/post.php.
- Tobetsa konopo ea "Test HTTP Post".
- Haeba HTTP Post e amoheloa 'me e sebetsoa, "OK" e tla bontšoa haufi le konopo. Hammoho le sena, XML/JSON file e tla etsoa bukeng e tšoanang, moo post.php e leng teng. The file lebitso le tla ba le lintlha tsa nako. Bakeng sa mohlalaample – 20210601103318_status.xml.
9.3. Lethathamo la litaelo tsa HTTP API
TCG140-4 e ts'ehetsa litaelo tse latelang tsa HTTP (tse nang le maemo a thata):
| Taelo | Tlhaloso |
| rn=xxx | Bulela relay n HO (xxx=bulela) kapa TIMA (xxx=tima) (n ke 1,2,3 kapa 4 bakeng sa relay e fapaneng) r2=on — e tla bulela relay 2 HO TSAMAEA r4=tima - e tla tima relay 4 r1=on&r2=on&r3=on&r4=bule - e tla tima li-relay tsohle ON rl=off&r2=off&r3=off&r4=off - e tla tima li-relay tsohle. |
| rn=tg | Toggle relay n (n ke 1,2,3 kapa 4 bakeng sa relay e fapaneng) r2= tg— e tla fetola relay 2 r1=tg&r4=tg— e tla toggle relay 1 le 4 |
| rn= pl | Pulse relay n (n ke 1,2,3 kapa 4 bakeng sa relay e fapaneng) r3=pl — e tla pulse relay 3 rl=pl&r2=pl&r3=pl&r4=p1 |
| vnf=10.0 | Beha Min ea tlhahiso ea analoge ho 10.0 (f ke 1,2,3 kapa 4 bakeng sa kenyeletso e fapaneng) vn1=10.0 e tla beha Min bakeng sa tlhahiso ea analog 1 |
| vxf=20.0 | Beha Max ea kenyelletso ea analoge ho 20.0 (f ke 1,2,3 kapa 4 bakeng sa kenyeletso e fapaneng) vx2=20.0 e tla beha Max bakeng sa ho kenya analoge 2 |
| vyf=1.0 | Beha Hys ea tlhahiso ea analoge ho 1.0 (f ke 1,2,3 kapa 4 bakeng sa kenyelletso e fapaneng) vy4=1.0 e tla beha Hys bakeng sa tlhahiso ea analog 4 |
| snpt=30.0 | Beha Min ea sensor ho 30.0 (leq ke 1,2,3,4,5,6,7 kapa 8 bakeng sa sensor e fapaneng t ke 1 kapa 2 bakeng sa parameter e fapaneng ea sensor) snl2=30.0 e tla beha Min bakeng sa sensor 1, parameter 2 |
| sxpt=40.0 | Beha Max ea sensor ho 40.0 (p ke 1,2,3,4,5,6,7 kapa 8 bakeng sa sensor e fapaneng t ke 1 kapa 2 bakeng sa parameter e fapaneng ea sensor) sx42 = 40.0 e tla beha Min bakeng sa sensor 4, parameter 2 |
| sypt=2.0 | Beha Hys ea sensor ho 2.0 (leq ke 1,2,3,4,5,6,7 kapa 8 bakeng sa sensor e fapaneng t ke 1 kapa 2 bakeng sa parameter e fapaneng ea sensor) sy81 = 2.0 e tla beha Hys bakeng sa sensor 8, parameter 1 |
| delse n=xxxx | Ho lieha ha tsebiso bakeng sa li-sensor (xxxx e pakeng tsa 0 le 3600) |
| delanl=xxxx | Ho lieha ha tsebiso bakeng sa likenyelletso tsa analog (xxxx e lipakeng tsa 0 le 3600) |
| deldig=xxxx | Ho lieha ha tsebiso bakeng sa likenyelletso tsa dijithale (xxxx e lipakeng tsa 0 le 3600) |
| ddal=xxxx | Tieho e tlase ho isa ho e phahameng bakeng sa tlhahiso ea dijithale 1 (xxxx e lipakeng tsa 0 le 3600) |
| ddl=xxxx | Tieho e phahameng ho isa tlase bakeng sa tlhahiso ea dijithale 1 (xxxx e lipakeng tsa 0 le 3600) |
| dda2=xxxx | Tieho e tlase ho isa ho e phahameng bakeng sa tlhahiso ea dijithale 2 (xxxx e lipakeng tsa 0 le 3600) |
| dd2=xxxx | Tieho e phahameng ho isa tlase bakeng sa tlhahiso ea dijithale 2 (xxxx e lipakeng tsa 0 le 3600) |
| dataf=x | Sebopeho sa data XML/JSON bakeng sa HHTP Post — 0 XML, 1 JSON |
| purl=yyy | URL bakeng sa XML/JSON HTTP Post to Server 1, moo m e leng tsela e felletseng ea ho php file pur1=212.25.45.120:30181/xampp/test/pushtest.php |
| purl2=yyy | URL bakeng sa XML/JSON HTTP Post to Server 2, moo m e leng tsela e felletseng ea ho php file pur1=212.25.45.120:30181/xampp/test/pushtest.php |
| holimo=x | Nako ea poso ea XML/JSON HTTP ka metsotsoana (x e lipakeng tsa 60 le 172800) pper=600 - e tla beha nako ea Post ho metsotsoana e 600 |
| dk=xxx | XML/JSON HTTP Post key — xxx e fihla ho litlhaku tse 17 |
| lintlha=x | Sebopeho sa data sa JSON/Mongolo o hlakileng bakeng sa MOTT Phatlalatsang — 0 JSON, 1 Mongolo o hlakileng |
| mmode=x | Phatlalatsa protocol, moo x e leng 0 bakeng sa ho se sireletsehe le 1 bakeng sa TLS/SSL |
| morekisi=xx>c | Netefatso ea lebitso la mosebelisi bakeng sa MATT, moo xxxx e leng lebitso la mosebelisi |
| mpass=xxxx | Netefatso ya phasewete bakeng sa MQTT, moo xxxx e leng phasewete |
| murl=yyy | URL bakeng sa khatiso ea MATT, moo yyy e leng tsela mur1=212.25.45.120 |
| mport=yyy | Boema-kepe bakeng sa phatlalatso ea MATT, moo yyyy e leng port mport=1883 |
| mopere=x | Nako ea khatiso ea MATT ka metsotsoana (x e pakeng tsa 60 le 172800) mper=600 - e tla beha nako ea khatiso ea MATT ho metsotsoana e 600 |
| boloka | Boloka liphetoho tsohle tse fetileng (ntle le e 'ngoe ea li-relay) mohopolong oa FLASH. Joalo ka ha poloko e 'ngoe le e' ngoe e bonts'a lipotoloho tsa FLASH (mamello), taelo ena e lokela ho sebelisoa ka hloko haholo. pper=120&save — e tla beha nako ea Post ho metsotsoana e 120 ebe u e boloka |
| FIN | Qetella kopano |
Litaelo tsa ho atisa li romelloa li hokahane le "&".
Litaelo li romelloa ka karabo ho XML/JSON kapa CSV HTTP Posts. Li etsoa haeba "Ts'ebetso ea Karabo" e nolofalitsoe.
9.4. File meaho
Bakeng sa XML file sebopeho ka kopo sheba Sehlomathiso A.
Bakeng sa JSON file sebopeho ka kopo sheba Sehlomathiso sa B.
9.5. MODBUS RTU
9.5.1. Mekhahlelo ea puisano
Bakeng sa MODBUS RTU, TCG140-4 e tšehetsa mekhahlelo e latelang ea puisano:
- Sekhahla sa Baud - 2400, 4800, 9600, 19200, 38400, kapa 57600;
- Lintlha tsa data - 8;
- Emisa likotoana - 1 kapa 2;
- Parity - Odd kapa esita le;
Joalo ka liparamente tsa puisano tsa kamehla tsa feme, sesebelisoa se sebelisa tse tloaelehileng bakeng sa MODBUS RTU:
- Sekhahla sa Baud - 19200;
- Lintlha tsa data - 8;
- Emisa likotoana - 1;
- Parity - Esita le;
9.5.2. Sesebelisoa sa ntlafatso sa li-sensor tsa Teracom
TCG140-4 e ts'ehetsa sesebelisoa sa ntlafatso sa sensor FW.
Sesebelisoa se fumaneha ho http://device.ip.address/teracom485.htm.
Ela hloko! Ho etsa liphetoho leha e le life ho sensor ea MODBUS RTU e lokela ho ba mong ka bese ea RS-485.
9.5.2.1 Litlhophiso tsa kutlo
Sesebelisoa se sebetsa le mekhoa ea puisano ea MODBUS RTU ea hajoale.
Ho qoba likhohlano mokhoa o motle ke ho beha TCG140-4 le sensor e nang le mekhoa ea puisano ea fektheri ea MODBUS RTU. Sena se tla netefatsa ts'ebetso e bonolo.
Mekhahlelo ea puisano ea MODBUS RTU ea kamehla bakeng sa TCG140-4 e hlalositsoe ho 8.5.1. Mekhahlelo ea puisano.
Pele o etsa liphetoho leha e le life, ho khothaletsoa ka matla hore u hlahlobe litlhophiso tsa sensor. Sena se tla tsebisa ka mofuta oa hajoale oa FW oa sensor empa hape se tla hlahloba hore na sensor e le mong ka beseng.
9.5.2.2 Sensor FW ntlafatso
Ho hlophisa ntlafatso ea FW, e loketseng file e lokela ho kenngoa ho sensor pele, 'me ka mor'a sena, konopo ea "Update" e lokela ho hatisoa.
9.6. MQTT
MQTT ke protocol ea lipalangoang tsa Client-Server e phatlalatsang/ngolisa. E bobebe, e bulehile, e bonolo ebile e etselitsoe hore ho be bonolo ho e sebelisa. MQTT e sebelisoa liindastering tse ngata tse fapaneng, tse kang likoloi, tlhahiso, likhokahano tsa mehala, oli, khase joalo-joalo.
Tse ling ka MQTT li ka baloa ho www.mqtt.org.
Data Logger
Setsebi se sebelisa "buffer" e chitja mohopolong oa FLASH. Ha motho ea remang lifate a etsa moqolo o felletseng oa buffer e chitja, data e ncha e hlakola ea khale ka ho fetisisa. Ka tsela ena memori ea FLASH e boloka tlaleho e felletseng ka linako tsohle. Kopi ea tlaleho e felletseng ea fumaneha bakeng sa ho khoasolla.
Palo ea litlaleho e itšetlehile ka bolelele ba litlhaloso le hore na ho sebelisoa litlhaku tsa mofuta ofe.
Boemong bo bobe ka ho fetisisa (tlhaloso ea li-byte tse 15 e nang le litlhaku tse tsoang karolong e phahameng ka ho fetisisa ea UTF-8) palo ea litlaleho e ka bang 37000. Nomoro ena e lekane bakeng sa matsatsi a 25 ka litlaleho ka motsotso o mong le o mong oa 1.
Maemong a mangata, data logger e ka boloka lirekoto tse 53000, tse lekaneng matsatsi a 36 ka lirekoto motsotso o mong le o mong.
Lirekoto tse ncha li ka kenngoa nako le nako e le SCV file ho seva e inehetseng ea HTTP ka - 1, 2, 3, 4, 6, 8, 12, kapa lihora tse 24. Semicolon e sebelisoa e le sekhetho.
Mola oa pele oa log file kamehla ke hlooho. Mela eohle, ho kenyelletsa le hlooho, qala ka ID ea rekoto le nako stamp.
Sebopeho sa mola o le mong (rekoto) ea logi ke ka tsela e latelang:
| ID | Nako | Mofuta oa rekoto | Boleng ba lintho tse kentsoeng | Li-relay | Maemo a alamo |
| ID | Nomoro e ikhethang ea 32-bit bakeng sa mola o mong le o mong (rekoto). |
| Nako | nako stamp ea rekoto, ka sebopeho yyyy.mm.dd, hh:mm:ss. |
| Mofuta oa rekoto | mefuta e latelang ea lirekoto e fumaneha: "Nako" bakeng sa rekoto ea nako le nako; "Ketsahalo" bakeng sa rekoto e qaliloeng ke boemo ba alamo; "Mofuta" bakeng sa rekoto ea hlooho; "Qala" ka mor'a boemo ba ho matlafatsa matla; "Qala bocha" ka mor'a hore maemo a reset; "Power Down" ka mor'a boemo ba ho theoha ha motlakase; "E mpe" bakeng sa rekoto e nang le bothata. |
| Boleng ba lintho tse kentsoeng | ka litaelo - li-sensor, lisebelisoa tsa analog le lisebelisoa tsa digital. |
| Li-relay | maemo a li-relay. |
| Maemo a alamo | bonts'a maemo bakeng sa kenyelletso e 'ngoe le e 'ngoe, "1" e bolela alamo e sebetsang. |
Mohlankanaample ea log file:
1131901;06.01.2021,01:02:23;Type;S11/°C;S12;S21/°C;S22;S31/°C;S32;S41/°C;S42;S51/°C;S52;S61/°C;S62;S71/°C;S72;S81/°C;S82;A1/V;A2/V;D1;D2;R1;R2;S1
1/°C;S12;S21/°C;S22;S31/°C;S32;S41/°C;S42;S51/°C;S52;S61/°C;S62;S71/°C;S72;S81/°C;S82;A1/V;A2/V;D1;D2;
1131902; 06.01.2021,01:02:23;Time;18.250;;18.375;;18.125;;18.500;;18.188;;18.125;;18.375;;18.375;;11.352;0.065;1;0;1;0;1;;1;;1;;1;;1;;1;;1;;1;;1;0;1;0;
1131903; 06.01.2021,01:02:23;Event;18.250;;18.438;;18.125;;18.500;;18.188;;18.125;;18.313;;18.375;;11.352;0.066;0;1;0;1;1;;1;;1;;1;;1;;1;;1;;1;;1;0;0;1;
1131904; 06.01.2021,01:02:24;Time;18.250;;18.438;;18.125;;18.500;;18.188;;18.125;;18.313;;18.375;;11.352;0.066;0;1;0;1;1;;1;;1;;1;;1;;1;;1;;1;;1;0;0;1;
1131905; 06.01.2021,01:02:25;Time;18.250;;18.375;;18.125;;18.500;;18.188;;18.125;;18.313;;18.375;;11.352;0.066;0;1;0;1;1;;1;;1;;1;;1;;1;;1;;1;;1;0;0;1;
1131906; 06.01.2021,01:02:26;Time;18.250;;18.375;;18.125;;18.500;;18.188;;18.125;;18.313;;18.313;;11.352;0.066;0;1;0;1;1;;1;;1;;1;;1;;1;;1;;1;;1;0;0;1;
1131907; 06.01.2021,01:02:27;Time;18.250;;18.375;;18.125;;18.438;;18.188;;18.125;;18.313;;18.313;;11.352;0.066;0;1;0;1;1;;1;;1;;1;;1;;1;;1;;1;;1;0;0;1;
1131908; 06.01.2021,01:02:27;Event;18.250;;18.375;;18.125;;18.438;;18.188;;18.125;;18.313;;18.313;;2.198;9.092;0;1;0;1;1;;1;;1;;1;;1;;1;;1;;1;;0;0;0;1;
Ntlafatso ea firmware
TCG140-4 e ts'ehetsa ntlafatso ea firmware ho feta WEB sehokelo le moyeng.
Bakeng sa ntlafatso ea firmware holim'a faele ea WEB sehokelo ka kopo bona 7.4.2. Tlhahisoleseling ea FW.
Bakeng sa ntlafatso ea firmware moeeng (e hloka khokahano ea 4GLTE/3G/2G) ka kopo latela mehato e ka tlase:
- Kenya ntlafatso file (.cod extension) ho seva sa HTTP sa sechaba;
- Romela taelo ea ntlafatso ea firmware (syntax ea molaetsa oa SMS e hlalositsoe ho 8. Seta ka SMS).
Ela hloko! Ke Monghali feela ea ka romellang molaetsa ona.
Firmware e tla khoasolloa le ho netefatsoa. Ho jarolla ho nka metsotso e ka bang 3. Haeba e file e nepahetse, Monghali o tla fumana molaetsa oa netefatso oa SMS. Ts'ebetso ea ntlafatso e nka metsotso e ka bang 2. Hang ha ntlafatso ea firmware e phethiloe (hoo e ka bang metsotso e 5), TCG140-4 e tla qala hape.
Ela hloko! Se ke oa tima phepelo ea motlakase nakong ea ntlafatso. Ho tima phepelo ea motlakase ho tla senya sesebelisoa.
Litlhophiso tsa kamehla tsa feme
TCG140-4 e ka khutlisetsoa litsing tsa eona tsa kamehla tsa feme ka mehato e latelang:
- Tlosa phepelo ea motlakase;
- Tobetsa 'me u tšoare konopo ea RESET ebe o bulela phepelo ea motlakase;
- Li-LED tsa STA le SIG li tla bulela;
- Tlosa konopo ea RESET.
Mojule o tla khutlisetsa litlhophiso tsa ona tsa kamehla.
Boitsebiso ba tikoloho
Thepa ena e reretsoe ho sebelisoa tikolohong ea Pollution Degree 2, bophahamong ba limithara tse 2000. Ha mojule e le karolo ea sistimi, likarolo tse ling tsa sistimi li tla latela litlhoko tsa EMC mme li reretsoe ho sebelisoa maemong a tšoanang a tikoloho.
Polokeho
Sesebelisoa sena ha sea lokela ho sebelisetsoa merero ea bongaka, ho pholosa bophelo kapa morero leha e le ofe moo ho hlōleha ha sona ho ka bakang kotsi e mpe kapa tahlehelo ea bophelo.
Sehlahisoa sena se na le coin/button cell battery. Se ke oa metsa betri, Kotsi ea Chelete e Chesang.
Haeba chelete ea tšepe / konopo ea sele e metsoa, e ka baka ho chesa ho hoholo kahare ka lihora tse 2 feela mme e ka lebisa lefung.
Boloka libeteri tse ncha le tse sebelisitsoeng hole le bana.
Haeba karolo ea betri e sa koalehe ka mokhoa o sireletsehileng, emisa ho sebelisa sehlahisoa 'me u se behe hole le bana.
Haeba u nahana hore libeteri li ka 'na tsa metsoa kapa li kentsoe ka har'a karolo efe kapa efe ea 'mele, batla thuso ea bongaka hanghang.
Ho fokotsa kotsi ea mollo, ho lokela ho sebelisoe terata e tenyetsehang feela, e nang le 0.5mm² kapa e kholoanyane bakeng sa ho kenya likhoele tsa dijithale le lisebelisoa tsa analog le tlhahiso ea phepelo ea sesebelisoa.
Ho qoba ts'oaetso ea motlakase le likotsi tsa mollo, u se ke ua pepesetsa sehlahisoa sena marong, pula kapa mongobo.
Lintho tse tlatsitsoeng ka mokelikeli, joalo ka li-vases, ha lia lokela ho beoa sesebelisoa sena.
Ho na le kotsi ea ho chesa haholo (tšenyo) ea mojule, haeba ho khothaletsoa libaka tsa mahala ho lisebelisoa tse haufi ha li netefatsoe. Karolo e kopaneng e nang le karolo e kantle e tla ba le sebaka sa ho hokela / ho tlosa thapo kamora ho kenya.
Teracom ha e fane ka tiisetso ea ts'ebetso e atlehileng ea sehlahisoa haeba sehlahisoa se ne se sebelisoa tlas'a maemo a fapaneng le litlhaloso tsa sehlahisoa.
Tlhokomelo
Ha ho phetheloa tšebeletso leha e le efe kapa tokiso ea sesebelisoa kapa hang ka selemo, ho tlameha ho etsoe tlhahlobo ea polokeho ho fumana hore na sehlahisoa sena se maemong a nepahetseng a ts'ebetso. Hloekisa sesebelisoa feela ka lesela le omeletseng. Se ke oa sebelisa mochini o hloekisang metsi kapa mochini o hloekisang aerosol. U se ke ua sebelisa mochine o hloekisang oa magnetic / static (se tlosa lerōle) kapa mofuta ofe kapa ofe oa lisebelisoa tsa abrasive ho hloekisa sesebelisoa.
Litaba tsa sephutheloana
Lebokose le na le:
- TCG140-4
- Multi-band antenna - 698 ho 960 le 1710 ho 2690MHz
- Li-spacers/li-bumper tse 'ne
- RS-485 terminator
- Tataiso ea ho qala kapele
Setšoantšo sa XML file (status.xml) sebopeho:
TCG140-4
TCG140-4
862632040544279
TCG140-4-v1.000
www.teracomsystems.com
info@teracomsystems.com
TCG140-4
Sebaka
S1:TST1xx
2867895F07000058
1W
1 Mohala
24.2
°C
0
19.0
100.0
0.5
-
-
0
-
-
-
S2
0000000000000000
1W
1 Mohala
-
-
0
-
-
-
-
-
0
-
-
-
S3
0000000000000000
1W
1 Mohala
-
-
0
-
-
-
-
-
0
-
-
-
S4
0000000000000000
1W
1 Mohala
-
-
0
-
-
-
-
-
0
-
-
-
S5
3300000000000000
MB
3
25.0
°C
0
-40.0
85.0
8.5
34.8
%RH
0
0.0
100.0
10.0
S6
0000000000000000
MB
0
-
-
0
-
-
-
-
-
0
-
-
-
S7
0000000000000000
MB
0
-
-
0
-
-
-
-
-
0
-
-
-
S8
0000000000000000
MB
0
-
-
0
-
-
-
-
-
0
-
-
-
Kenyelletso ea Analog 1
0.000
V
1.000
0.0000
0
0.000
10.000
1.000
Kenyelletso ea Analog 2
0.000
V
1.000
0.0000
0
0.000
10.000
1.000
Kenyelletso ea Analog 3
0.000
V
1.000
0.0000
0
0.000
10.000
1.000
Kenyelletso ea Analog 4
0.000
V
1.000
0.0000
0
0.000
10.000
1.000
Kenyelletso ea Dijithale 1
BULETSE
1
KHOLUTSOE
0
Kenyelletso ea Dijithale 2
BULETSE
1
KHOLUTSOE
0
Relay 1
TLOA
0
0.1
0
Relay 2
TLOA
0
0.2
0
Relay 3
TLOA
0
0.3
0
Relay 4
TLOA
0
0.4
0
300
300
67
0
Skena
16.02.2021
14:19:12
A1 BG A1 BG
284
01
28201
46743
-71
43.835283
25.965967
Moo:
- le - e bolela hore ha ho na sensor ea 1-Wire sebakeng sena;
1 ho bolela hore ho na le boemo ba trigger.
Le JSON file (status.json)sebopeho:
{
"Mohlokomeli": {
"DeviceInfo": {
"DeviceName": "TCG140-4",
"HostName": "TCG140-4",
"ID": "862632040544279",
"FwVer": "TCG140-4-v1.000",
"MnfInfo": "www.teracomsystems.com“,
"SysContact": "info@teracomsystems.com“,
"SysName": "TCG140-4",
"SysLocation": "Sebaka"
},
“S”: {
“S1”: {
"tlhaloso": "S1:TST1xx",
"id": "2867895F07000058",
"mofuta": "1W",
"addr": "1 Wire",
"ntho1": {
"boleng": "24.0",
“yuniti”: “°C”,
"alamo": "0",
"min": "19.0",
"max": "100.0",
"hys": "0.5"
},
"ntho2": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
}
},
“S2”: {
"tlhaloso": "S2",
"id": "0000000000000000",
"mofuta": "1W",
"addr": "1 Wire",
"ntho1": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
},
"ntho2": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
}
},
“S3”: {
"tlhaloso": "S3",
"id": "0000000000000000",
"mofuta": "1W",
"addr": "1 Wire",
"ntho1": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
},
"ntho2": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
}
},
“S4”: {
"tlhaloso": "S4",
"id": "0000000000000000",
"mofuta": "1W",
"addr": "1 Wire",
"ntho1": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
},
"ntho2": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
}
},
“S5”: {
"tlhaloso": "S5",
"id": "3300000000000000",
"mofuta": "MB",
"addr": "3",
"ntho1": {
"boleng": "25.1",
“yuniti”: “°C”,
"alamo": "0",
"min": "-40.0",
"max": "85.0",
"hys": "8.5"
},
"ntho2": {
"boleng": "34.6",
“yuniti”: “%RH”,
"alamo": "0",
"min": "0.0",
"max": "100.0",
"hys": "10.0"
}
},
“S6”: {
"tlhaloso": "S6",
"id": "0000000000000000",
"mofuta": "MB",
"addr": "0",
"ntho1": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
},
"ntho2": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
}
},
“S7”: {
"tlhaloso": "S7",
"id": "0000000000000000",
"mofuta": "MB",
"addr": "0",
"ntho1": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
},
"ntho2": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
}
},
“S8”: {
"tlhaloso": "S8",
"id": "0000000000000000",
"mofuta": "MB",
"addr": "0",
"ntho1": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
},
"ntho2": {
“boleng”: “—“,
“yuniti”: “—“,
"alamo": "0",
“min”: “—“,
“max”: “—“,
"hys": "-"
}
}
},
"AI": {
“AI1”: {
"tlhaloso": "Analog Input 1",
"boleng": "0.000",
"yuniti": "V",
"multiplier": "1.000",
"offset": "0.0000",
"alamo": "0",
"min": "0.000",
"max": "2.000",
"hys": "0.010"
},
“AI2”: {
"tlhaloso": "Analog Input 2",
"boleng": "0.000",
"yuniti": "V",
"multiplier": "1.000",
"offset": "0.0000",
"alamo": "0",
"min": "0.000",
"max": "2.000",
"hys": "0.010"
},
“AI3”: {
"tlhaloso": "Analog Input 3",
"boleng": "0.000",
"yuniti": "V",
"multiplier": "1.000",
"offset": "0.0000",
"alamo": "0",
"min": "0.000",
"max": "2.000",
"hys": "0.010"
},
“AI4”: {
"tlhaloso": "Analog Input 4",
"boleng": "0.000",
"yuniti": "V",
"multiplier": "1.000",
"offset": "0.0000",
"alamo": "0",
"min": "0.000",
"max": "10.000",
"hys": "1.000"
}
},
“DI”: {
“DI1”: {
"tlhaloso": "Digital Input 1",
“value”: “OPEN”,
"valuebin": "1",
"alarmState": "E TSEBILE",
"alamo": "0"
},
“DI2”: {
"tlhaloso": "Digital Input 2",
“value”: “OPEN”,
"valuebin": "1",
"alarmState": "E TSEBILE",
"alamo": "0"
}
},
“R”: {
“R1”: {
"tlhaloso": "Relay 1",
"value": "OFF",
"valuebin": "0",
"pulseWidth": "0.1",
"control": "0"
},
“R2”: {
"tlhaloso": "Relay 2",
"value": "OFF",
"valuebin": "0",
"pulseWidth": "0.2",
"control": "0"
},
“R3”: {
"tlhaloso": "Relay 3",
"value": "OFF",
"valuebin": "0",
"pulseWidth": "0.3",
"control": "0"
},
“R4”: {
"tlhaloso": "Relay 4",
"value": "OFF",
"valuebin": "0",
"pulseWidth": "0.4",
"control": "0"
}
},
"HTTPPush": {
"Senotlolo": "",
"PushPeriod": "300"
},
“MQTT”: {
"Period": "300"
},
"signalpercent": "67",
"hwerr": "",
"Ho tšosoa": "0",
"Scannig": "Scan",
“Nako”: {
"Letsatsi": "16.02.2021",
“Nako”: “14:39:55”
},
"NetworkInfo": {
"Lebitso": "A1 BG A1 BG",
“SC”: {
"MCC": "284",
"MNC": "01",
"LAC": "28201",
"CID": "46596",
"SQ": "-71"
},
"Latitude": 43.835283,
"Longitude": 25.965967
}
}
}
}
Av. Fray Antonio Alcalde 1822, Miraflores, 44270
Guadalajara, Jalisco, Mexico. Mohala 33-3854-5975
www.logicbus.com.mx
Litokomane / Lisebelisoa
 |
logicbus TCG140-4 GSM-GPRS Remote IO Module [pdf] Bukana ea Mosebelisi TCG140-4 GSM-GPRS Remote IO Module, TCG140-4, GSM-GPRS Remote IO Module IO Remote |
