CLS-1 UltraSonic Clear LabelSensor
Buka ea Tataiso

Litlhaloso

PUSELETSO VOLTAGE

• 12 ho 30 VDC
• Polarity e Sirelelitsoeng
  Hlokomela: E sebelisoa ho Lipotoloho tsa Sehlopha sa 2

LITLHOKOMELO KHOANE

• 95mA @ 12 VDC, 45mA @ 30 VDC

LIPHOLO TSA DITITSELE

• (1) NPN le (1) PNP e bulehileng mokelli tlhahiso 150mA Max; <2V Residual Voltage
  (Hlokomela: Ho CLSC-1M8, NPN & PNP ke software e ka khethoang).
• Liphetho tsohle li lula li sirelelitsoe ka nako e khuts'oane

REMOTE AUTOSET KENYA

• Ho teba ha nakoana kapa ho kenya letsoho ho fumana; 1.2mA boholo; Software e ka khethoang

LIEKETSENG MATS'ELI

• Pontšo ea Graphic ea OLED - E kenyelletsa Indicator ea Contrast, Pontšo ea linomoro, Set Point le Trigger Point, le likhetho tsohle tsa sensor le mekhoa.
• Letšoao la Red Output la LED- E khantša ha li-transistors tsa sensor li le "ON".
  Hlokomela: Haeba tlhahiso ea LED e bonesa ha matla a phahama, boemo bo khuts'oane bo teng.

PUSHBUTTON TAOLI

• Litaolo tse tharo (3) tsa ho tobetsa
• Lekhalo (bakeng sa Gap AUTOSET)
• Label (bakeng sa lileibole tse nang le mekhahlelo e mengata)
• Menu (bakeng sa ho fihlella Likhetho)

TSIETSO TSOHLE

• Matla - e fetotsoe ke AUTOSET

KARABO NAKO

• 200μs

PHETEA

• 125μs

TEMPERATURE E MABAPI

• 4°C ho isa ho 50°C (39°F ho isa ho 122°F)

TIISETSO MOKHOA

• Aluminium e hanyetsanang le lik'hemik'hale, e nang le tšusumetso e phahameng
• Lintlha tse sa keneleng metsi: NEMA 4X, 6P le IP65
• E lumellana le litlhoko tse boima tsa sehlopha sa CE

TS'OANELO MOKHOPO

• 1-Point, 2-Point, kapa Dynamic AUTOSET; ka letsoho kapa ka hole.

TS'OANELO TS'OANE

• Manual kapa AUTO Fetola

LIEKETSENG TŠEBELETSO

• Ka tieho, ho tima ha nako, ho thunngoa ha 'ngoe, kapa ho theoha (Khetho e tsoetseng pele, software e ka khethoa).

MOTLATSI SEKONYELA

• M12 5-Pin, M8 4-Pin, kapa 6' (1.8m) Shielded Cable

RoHS e lumellana
Sehlahisoa se ka fetoha ntle le tsebiso

Maqhama le Litekanyo

Ultrasonic Hlakile Label Sensor

Litaelo tsa ho seta

Qala ho Seta e Bonolo Kenya Gap view, tobetsa 'me u tšoare konopo ea AUTOSET/GAP metsotsoana e' meli, "Gap Set" e tla hlahisoa ha e phethiloe. Sena se tla fella ka ho seta ho phethahetseng 99% ea nako. Haeba u na le lifensetere tse fosahetseng, kenya Leibole ho eona view, sutumelletsa 'me u tšoare konopo ea AUTOSET/LABEL metsotsoana e' meli, "Label Set" e tla hlahisoa ha e phethiloe. Tlhophiso ena ea lintlha tse peli e tla theha tlhophiso e ncha ea moeli e tla fella ka hore ho be le nako e tsitsitseng ea matšoao pakeng tsa web le label.
Hlokomela: Sensor e romelloa ka sekoaelo sa polasetiki se sireletsang bakeng sa pontšo. Tlosa sekoaelo se sireletsang bakeng sa ho hlaka haholoanyane viewng.

Boemo ba Label

Hlophisa Leibole ho Motsu (ka holimo) Beha label web hoo e tsepameng hodima motsu. Motsu ke moo li-transducer li lekanyelitsoeng.
Lokisa Lekhalo ho Mola (ka holimo ka ho le letona) Beha lekhalo la label bohareng ba sensor u sebelisa mohala oa ho tsamaisana joalo ka ha ho bonts'itsoe ka ho le letona. Neng viewho tloha ka holimo ho sensor, sebelisa LED e hlahisoang ho kenya lekhalo la label bohareng.
Tsebo e Bonolo (kafa tlase ka ho le letona) Leibole ea sebaka webbing hoo e thellang ka tlase ho lekhalo la sensor lekhalo. Sena se tla netefatsa ho seta le ts'ebetso e tsitsitseng haholoanyane.

Tobetsa Menu bakeng sa ho Seta ka botlalo

1. Qala Dynamic Set
   Tobetsa kapa ho or konopo ea ho qala Dynamic Set; hula li-label le likheo ka sensor; tobetsa kapa ho or konopo ho qeta.
   Sensor e ea tsoa hore e sebetse, 'me e lokela ho hlophisoa le ho itokisetsa ho sebetsa.
2. Fetola ka Boiketsetso
   Fetola ho tloha ho ea ho ho ea pele ka ho tobetsa ka nakoana e 'ngoe ea or konopo. Tokiso ea Auto e lekola maemo a lets'oao mme e etsa litokiso tsa othomathike ho boloka kutlo e le maemong a nepahetseng a karabelo.
3. Mokhoa oa Phello
   Fetoha ho tloha GAP () ho ea LABEL () ka ho tobetsa ka motsotsoana kapa ho or konopo.
   Output e tla fetohela pele le pele ka mokhoa ona.
   = Sephetho ho Label
   = Sephetho se Sekheong
4. Ponahatso Orientation
   Tobetsa ka motsotsoana kapa ho or konopo ea ho toggle orientation.
5. Selekanyi sa Nako (**Tlhahiso e tsoetseng pele)
   

   Off Delay: Liphetho li lula li le teng bakeng sa nako e behiloeng kamora nako ea ho kenya.	On Delay: Outputs bulela ha ho kenya ho feta nako e behiloeng”
   One Shot: Liphetho li bulela nako e behiloeng ha li hlahisoa ke ho kenya letsoho	Debounce: Liphetho li tsitsitse 'me li ts'oaroa maemong a hajoale bakeng sa nako e behiloeng

6. Konopo Lockout
   Tobetsa ka motsotsoana kapa ho or konopo ea ho totolla ho Lock () ho Notlolla (ha ho letshwao). E molemo bakeng sa tampts'ebetso ea mahala.
7. Reference Quick
   Tobetsa konopo ea A ho theosa ho theosa le litaelo tse bonolo tsa ho seta le likhetho. Tobetsa konopo ya • ho tsamaisetsa hodimo.
8. Sensor Scope (**Tlhahiso e tsoetseng pele)
   Khetho ena e lumella opareitara hore a hlahlobe ka mahlo ho seta ha hajoale bakeng sa ho pheta-pheta. Sebaka sa sensor se tla boela se senole mathata leha e le afe a ho seta kapa maikutlo a ho tšoaea kapa ho fetoha ha lekhalo.
   Tobetsa konopo ea nakoana konopo ho kgutsufatsa nako dipakeng tsa matshwao. Tobetsa konopo ea nakoana konopo ho lelefatsa nako pakeng tsa matshwao.

Mokhoa oa ho hlakisa

1. Khetha Sensor:
   Ultrasonic Hlakile Label Sensor
2. Khetha Cable:
   Sekheo = 6' (1.8m) Cable
   C = Sehokelo M12, 5-Pin
   (E tloaelehileng)
3. Kgetha Sehokelo:
   -1 = Sehokelo se tloaelehileng sa M12, bona #2 E kenyelletsa NPN le PNP ka bobeli
   -1M8 = M8, 4-Pin Connector NPN/PNP Software Selectable
   -1M8LE = Mehala e kang LER

Dikgetho tse tsoetseng pele

Ho fihlella Dikgetho tsa Pele, tobetsa o hatelle konopo ya Menu ha o hodisa.
Tobetsa konopo ea Menu ho tloha skrineng ho ea ho skrineng.
Tobetsa kapa ho or konopo ho khetha.

1. Hlahisa Fektheri bochaTobetsa kapa ho or konopo ho qala ho seta fektheri.
   Hlokomela: Skrine sa Advanced Option se tla fela ka mor'a metsotso e 5.
2. Mokhoa oa ho kenya (-1, -1M8 mefuta feela)Tobetsa kapa ho or konopo ea ho fetolela ho PNP / Mohloli kapa NPN / Sink.
3. Likarolo tsa SelekanyiTobetsa kapa ho or konopo ho toggle ho Enable or Disable.
4. Tlhahlobo ea Fektheri / Sensor ScopeTobetsa kapa ho or konopo ho toggle ho Enable or Disable.

E khutlela ho Main Screen

Lipontšo tsa ho Kena tse hole

Gap Set: Otla hang, 40ms ho 400ms.
Label Set: Otla habeli, 40ms ho 400ms, ka 40ms ho 400ms nako e sa sebetseng pakeng tsa pulses.
Dynamic Set: Tšoara Remote Input ka nako e fetang 750ms, hula li-label le likheo ka sensor, lokolla Remote Input line 'me sensor e khutlela ho Run mode.
Hlokomela: Maqhubu a bontšitsoeng a lumellana le mokhoa oa ho kenya PNP.

863 BOWSPRIT ROAD, CHULA VISTA, CA 91914, USA
MEFONO: (619) 616 7350, WWW.LOGICBUS.COM
PO BOX 25135, TAMPA, FL 33622-5135
813-886-4000 / 800-237-0946
ttco.com / info@ttco.com

Litokomane / Lisebelisoa

Logicbus CLS-1 UltraSonic Clear LabelSensor [pdf] Buka ea Taelo CLS-1 UltraSonic Clear LabelSensor, CLS-1, UltraSonic Clear LabelSensor, Clear LabelSensor, LabelSensor

Litšupiso

• Bukana ea Mosebelisi