K1 PTZ Camera Joystick Controller

PTZ KAMERA JOYSTICK MOLAOLI

SEBELISA UNIT KA BOLOKEHI

Pele o sebelisa yuniti ena, ka kopo bala tlhokomeliso le litemoso tse ka tlase tse fanang ka leseli la bohlokoa mabapi le ts'ebetso e nepahetseng ea yuniti. Ntle le moo, ho netefatsa hore o utloisisa hantle karolo e 'ngoe le e 'ngoe ea yuniti ea hau e ncha, ka kopo bala bukana e ka tlase. Bukana ena e lokela ho bolokoa 'me e lule e le teng bakeng sa ho sebelisoa haholoanyane.

Tlhokomediso Le Ditemoso

※ Ho qoba ho oa kapa ho senyeha, ka kopo u se ke oa beha yuniti ena kariking e sa tsitsang, setulong kapa tafoleng.
※ Sebetsa yuniti feela ka phallo e boletsoengtage.  

※ Hokela thapo ea motlakase ka sehokelo feela. U se ke ua hula karolo ea cable.  

※ Se ke oa beha kapa oa lihela lintho tse boima kapa tse bohale ka thapo ea motlakase. Thapo e senyehileng e ka baka likotsi tsa mollo kapa tsa motlakase. Kamehla hlahloba thapo ea motlakase bakeng sa ho senyeha ho feteletseng kapa ho senyeha ho qoba likotsi tse ka bang teng tsa mollo / motlakase.  

※ Se ke oa sebetsa sebakeng se kotsi kapa se ka bang le seqhomane. Ho etsa joalo ho ka fella ka mollo, ho phatloha, kapa liphello tse ling tse kotsi.  

※ Se ke oa sebelisa yuniti ena metsing kapa haufi le metsi.

※ Se ke oa lumella lino, likotoana tsa tšepe kapa lisebelisoa tse ling tsa kantle ho naha ho kena yuniti.

※ Tšoara ka hloko ho qoba lintho tse tšosang ha u le tseleng. Ho thothomela ho ka baka ho se sebetse hantle. Ha o hloka ho tsamaisa yuniti, sebelisa lisebelisoa tsa pele tsa ho paka kapa o phuthetse ho hong ho lekaneng.

※ Se ke oa tlosa likoahelo, liphanele, casing kapa ho fihlella lipotoloho ka matla a sebelisitsoeng yuniti! Tlosa motlakase 'me u hakolle thapo ea motlakase pele o e tlosa. Ts'ebeletso ea kahare / tokiso ea yuniti e lokela ho etsoa feela ke basebetsi ba nang le tsebo.  

※ Tima yuniti haeba ho etsahala ntho e sa tloaelehang kapa e sa sebetseng hantle. Hakolla tsohle pele o tsamaisa yuniti.

Hlokomela: ka lebaka la boiteko bo sa khaotseng ba ho ntlafatsa lihlahisoa le likarolo tsa sehlahisoa, litlhaloso li ka fetoha ntle le tsebiso.

1.Selelekela se Khutšoanyane
1.1 Ho fetaview

Ena ke setsebi sa khamera ea PTZ se laolang khamera e tšehetsang RS-422 / RS-485 / RS-232 / IP control, e hokahanyang lik'hamera tse fihlang ho 255, e fana ka bokhoni ba ho laola sebaka, ho tsepamisa maikutlo, ho leka-lekana ho tšoeu, ho pepeseha, le taolo ea lebelo la nako ea sebele. , 'me e fana ka litlhophiso tsa lik'hamera tse ntlafalitsoeng haholoanyane ho laola lik'hamera tsa PTZ, tse sebelisoang haholo thutong, likopanong, tsa bongaka tse hōle, litšebeletso tsa bongaka le likarolo tse ling tse ngata tsa indasteri.

1.2 Likarolo tse ka Sehloohong

• Taolo ea motsoako oa li-protocol le IP/ RS-422/ RS-485/ RS-232
• Laola protocol ka VISCA, VISCA-Over-IP, Onvif le Pelco P&D
• Laola ho fihla ho kakaretso ea lik'hamera tsa IP tse 255 marang-rang a le mong
• Likonopo tse 3 tsa ho letsetsa kapele, kapa linotlolo tse 3 tse ka abeloang ke mosebelisi ho kopa lits'ebetso tse khaoletsang kapele
• Taolo e potlakileng ea ho pepeseha, lebelo la shutter, iris, matšeliso, tekano e tšoeu, ho tsepamisa maikutlo, lebelo la pan / ho sekamela, lebelo la zoom.
• Maikutlo a tactile ka sesebelisoa sa rocker / seesaw sa setsebi bakeng sa taolo ea zoom
• Batla lik'hamera tsa IP tse fumanehang marang-rang 'me u fane ka liaterese tsa IP habonolo
• Letšoao la ho bonesa linotlolo tsa mebala e mengata le tataisa ts'ebetso ho mesebetsi e itseng
• ally GPIO tlhahiso ea ho bonts'a hore khamera e laoloa hona joale
• Ntlo ea tšepe e nang le ponts'o ea LCD ea 2.2 inch, joystick, konopo ea 5 ea ho potoloha
• E tšehetsa lisebelisoa tsa motlakase tsa POE le 12V DC

2.Li-interface
Lisebelisoa tsa 2.1

1	Phetoho ea Matla
2	Matla a DC 12V
3	THABANG GPIO
4	RS232 (PELCO-D, PELCO-P, VISCA)
5	RS-422/485 (PELCO-D, PELCO-P, VISCA)
6	IP (ONVIF, VISCA Over IP)

2.2 Tlhaloso

MAKHOPO	Li-interface	IP(RJ45), RS-232, RS-485/RS-422
	Tsamaiso ea taolo	IP Protocol: ONVIF, VISCA Over IP Protocol ea serial: PELCO-D, PELCO-P, VISCA
	Sekhahla sa Baud	2400, 4800, 9600, 19200, 38400 bps

USER

Pontšo

LCD ea 2.2 inch

LIBAKATSO	Joystick	Pan / Shebisa / Atometsa
	Khaoletso ea khamera	3 likanale
	Keyboard	Linotlolo tse ka abeloang mosebelisi×3, Lock×1, Menu×1, BLC×1, konopo ea Rotation×5, Rocker×1, Seesaw×1
	Aterese ea khamera	Ho fihlela ho 255
	Seta pele	Ho fihlela ho 255
MATLA	Matla	PoE / DC 12V
	Tšebeliso ea Matla	PoE: 5W, DC: 5W
TIKOLOHO	Mocheso oa Mosebetsi	-20°C ~ 60°C
	Mocheso oa polokelo	-40°C ~ 80°C
TŠEBELETSO	Boemo (LWD)	270mm(L)×145mm(W)×29.5mm(H)
	Boima ba 'mele	1181g

3.Panele ea Taolo
3.1 Tlhaloso

1	Taolo ea Phihlello e Potlakileng ea Khamera (Aperture/pones/peale e tšoeu / litlhophiso tsa ts'ebetso e tsepamisitsoeng)
2	3Camera Call Up & Dikonopo tse ka abelwang mosebedisi, Notlela, Menu le dikonopo tsa BLC.
3	Konopo ea seeaw (taolo ea ho atametsa)
4	Konopo ea menyu (Sebelisa lebelo la pan/ho sekamela, taolo ea lebelo la katametso le li-setting tsa menu ea khamera ea PTZ)
5	Aterese ea khamera le boemo ba boemo le li-setting tsa menu ea khamera ea PTZ.
6	Multi-function digital panel (ho kenya linomoro, litlhaku, joalo-joalo) le litlhophiso tsa menyetla ea khamera ea PTZ.)
7	PTZ joystick (Ho laola ketso ea motsamao oa khamera)

3.2 Konopo ea Keyboard

■ Taolo ea phihlello e potlakileng ea khamera Tobetsa konopo ea AUTO EXPOSURE ho bulela ponahalo ea boiketsetso. Mokhoeng oa ho pepeseha ntle le koloi, retelletsa konopo ea IRIS ho lokisa ka bouena boleng ba kh'amera. Tobetsa konopo ea AUTO WB ho bulela "automatic white balance". Tobetsa konopo ea ONE PUSH WB, khamera e kena ka mokhoa o le mong oa ho leka-lekanya o mosoeu. Ka mokhoa oa ho leka-lekana o mosoeu oo e seng oa othomathike, retelletsa R knob ho fetola ka bowena kh'amera e khubelu 'me u fetole konopo ea B ho fetola ka botsona phaello ea kh'amera. Tobetsa konopo ea AUTO AF ho bulela autofocus ea khamera, ebe o tobetsa konopo ea ONE PUSH AF ho kenya kh'amera mokhoeng o le mong oa ho tsepamisa maikutlo. Ka mokhoa oo e seng oa autofocus, u ka fetola ka bouena sebaka sa khamera.
■ Notlela, Menu, BLC le linotlolo tse ka abeloang mosebelisi Lot: Notlela Likonopo; Menu: Bula Menu; BLC: Leseli le ka morao. Tobetsa likonopo tsa ho khaoletsa F1-F3 ho letsetsa kh'amera e tsamaisanang kapele, o ka boela oa etsa ts'ebetso ea senotlolo ho latela litlhoko tsa mosebelisi, ts'ebetso e ikhethileng e behiloe ka har'a menu.
■ Konopo ea seeaw   Tobetsa konopo ea seesaw T ho hulela mohopolo oa khamera hole, 'me u tobetse konopo ea seesaw W ho hulela kh'amera haufi, ho feta moo, u ka sebelisa "joystick" ea PTZ ho laola katametso ea khamera.
■ Konopo ea menu   Tobetsa konopo ea SETUP ho kenya lenane la molaoli .Likhetho tsa menyetla li ka khethoa ka konopo. Tlas'a leqephe la boemo, ho potoloha konopo ho ka sebelisoa ho laola lebelo la khamera ea PTZ.

■ Multi-function digital panel Phanele ea linomoro e u lumella ho kenya linomoro, litlhaku, joalo-joalo.
■ Aterese ea khamera le boemo ba boemo BATLA: Patlisiso ea khamera ea taolo LIPOTSO: Patlisiso ea khamera ea molaoli CAM: Hopola kh'amera e boletsoeng, tobetsa nomoro ea kh'amera e boletsoeng phanele, ebe u tobetsa konopo ho chencha kh'amera. RESETSA: Seta boemo ba khamera, kenya nomoro phanele, ebe o tobetsa konopo ea PRESET ho boloka boemo ba khamera. SETA HAPE: Khamera e hlakola boemo ba esale pele, kenya nomoro phanele, ebe o tobetsa RESET ho hlakola boemo ba khamera e setiloe esale pele. LETSA: Hopola boemo bo behiloeng esale pele, kenya nomoro phanele, ebe o tobetsa konopo ea CALL, ebe kh'amera e hopola boemo bo boletsoeng esale pele.
■ Skrine Pontšo ea li-setting tsa menyetla, pontšo ea leqephe la boemo.
■ PTZ joystick E sebedisetswa ho laola motsamao wa khamera tlasa maemo a tlwaelehileng. E sebedisetswa ho laola menu ha o letsetsa menu ya khamera.

4.Litlhophiso tsa Menu

4.1 BOEMO

Leqephe la boemo le bonts'a aterese ea kh'amera, lebitso la khamera, protocol ea taolo le tlhaiso-leseling e amanang le protocol (IP port, sekhahla sa baud le lintlha tse ling). Tlas'a leqephe la boemo, fetola konopo ho laola lebelo la khamera ea PTZ. Leqephe la boemo ka tsela e latelang:

Ho phaella moo, tlhahisoleseding ea nomoro e kentsoeng e tla bontšoa k'honeng e ka tlaase e letšehali ea leqephe la boemo, 'me tlhahisoleseding ea ts'ebetso e tla bontšoa k'honeng e ka tlaase ho le letona.  

Bakeng sa mohlalaample, haeba u kenya nomoro ea 10, nomoro ea 10 e tla bontšoa k'honeng e ka tlaase e letšehali, 'me ha u tobetsa konopo ea CALL, tlhahisoleseding ea ts'ebetso eo e tla bontšoa k'honeng e ka tlaase ho le letona, joalokaha ho bontšitsoe setšoantšong.

4.2 HLOKA

Tobetsa SETUP phanele ya dikonopo ho kenya SETUP menu.

4.2.1 IP Config

Khetha khetho ea IP Config ebe o tobetsa konopo ea menu ho lokisa IP ea molaoli.

● Marang-rang

Ho na le mekhoa e 'meli ea ho fumana IP: Dynamic (IP e hlophisitsoeng ke router) le Static (seta IP ka bolokolohi u le mong). Khetha mokhoa oo u o hlokang ka menu ea knob. Litlhophiso tsa kamehla ke Dynamic, 'me aterese ea kamehla ea IP ke 192.168.5.177. 

Matla: Ho hokela kh'amera ea PTZ le router e nang le likarolo tsa DHCP, ebe e tla fumana aterese ea IP ka bo eona. Etsa bonnete ba hore kh'amera ea PTZ le PC li ho netweke e tšoanang ea sebaka seo.

E tsitsitseng: Khetha mokhoa o tsitsitseng oa ho fumana IP ha PC e se na DHCP. Hokela kh'amera ea PTZ le PC ka thapo ea marang-rang, beha aterese ea IP ea PC sebakeng se tšoanang le sa kh'amera ea PTZ.

● Netmask

Beha NetMask. Setting ea kamehla ke 255.255.255.0. 

● Gateway

Beha Gate Way ho latela aterese ea IP ea hajoale. Setting ea kamehla ke 192.168.5.1. Boloka tlhophiso ha litlhophiso tsa marang-rang li felile.

4.2.2 tlhophiso ea LED

Bulela mokhoa oa LED, lebone la bohlokoa holim'a phanele le lula le butse, tima mokhoa oa LED, lebone la senotlolo phanele le tima.

4.2.3 Boemo ba letlalo

Kenya li-setting tsa SETUP ho tsoa ho menu ho fetola setaele sa letlalo la skrini. Ho na le mekhoa e mene eo u ka e khethang ho Mobala1/Mmala2/Mmala3/Mmala4.

4.2.4 Senotlolo se abetsoeng

Likonopo tse abetsoeng li ka hlophisoa joalo ka likhaoletso ho kenya tšebetsong lits'ebetso tsa khamera.

Likhutšoane tsa F1, F2, F3, F4, F5 le F6 li ka hlophisoa ho phethola setšoantšo sa khamera holimo le tlase le ho le letšehali le ka ho le letona, ho hatsetsa skrine ea khamera, joalo-joalo.

Ho tswa ho Keyboard Setup Menu, suthisa sesupa ho leba sebakeng se ASSIGNED KEY. 

Senotlolo se abetsoeng se ka abeloa likarolo tsa khamera ho latela tse latelang:

1	Kam N	Khamera ea mohala e potlakileng N
2	Lehae	Laela kh'amera e khethiloeng ho kenya ts'ebetso ea eona ea 'Home'
3	P/T Seta bocha	Seta kh'amera e khethiloeng bocha
4	Matla	Tima khamera e khethiloeng
5	Semumu	Tlosa molumo ho khamera e khethiloeng
6	Qhatsela	Emisa setšoantšo sa khamera e khethiloeng
7	Fenya	Fenya senepe sa kh'amera e khethiloeng (Flip Up and down)
8	Phetoho ea LR	Fetolela L/R (pan direction) ea kh'amera e khethiloeng (Fepha ka ho le letšehali le ka ho le letona)

4.2.5 Phetolelo 

Kenya lenane ho sheba mofuta oa APP le mofuta oa MCU oa taolo ea khamera ea PTZ.

4.2.6 Seta bocha

Hlakola litlhophiso tsohle tsa keyboard, 'me u khutlisetse maemo a feme.

ELA HLOKO: Se ke oa sisinya Joystick kapa Zooming Seesaw 'me u li siee sebakeng sa pele ha FACTORY DEFAULT e ntse e sebetsa.

Kgetha Tsoa ebe o tobetsa konopo ea menu ho tsoa leqepheng la menu ebe o khutlela leqepheng la boemo.

 

4.3 Batla

Mookameli o tšehetsa liprothokholo tsa VISCA-IP le ONVIF ho batla lik'hamera, o hloka ho lokisa marang-rang pele, tobetsa konopo ea SEARCH holim'a phanele ebe u khetha VISCA-IP, protocol ea ONVIF ka menu. Khetha protocol ho ea ka boemo 'me u qale ho batla.

Ha ho phenyekolla ho phethiloe, lik'hamera tsohle tse batlisisitsoeng li tla bontšoa, tobetsa ho IP e lumellanang le ho kenya khamera e lumellanang le litlhophiso tsa khamera, haeba e sa bontše letho, ho bolela hore khamera ha e fumanehe.

Lebitso la mosebelisi le password tse sebelisitsoeng ho protocol ea ONVIF li ka fetoloa. Tobetsa hang phaneleng ya dinomoro ebe o kenya nomoro e tsamaisanang le yona, tobetsa habedi kapa ho feta ka tatellano ho kenya tlhaku e tsamaelanang le yona. Tobetsa hang phanele ho kenya nomoro le makhetlo a mabeli kapa ho feta ho kenya tlhaku.

4.4 Lipatlisiso

Molaoli o boloka kakaretso ea lik'hamera tse 255 (1 ~ 255). Ka ho tobetsa konopo ea INQUIRY leqepheng la boemo, u ka botsa tlhahisoleseling ea khamera efe kapa efe leqepheng la POTSO, kapa kenya nomoro ebe u tobetsa konopo ea "INQUIRY" ho botsa tlhahisoleseling ea khamera e nang le aterese ea nomoro e tsamaellanang.

Ho phaella moo, leqephe la POTSO le u lumella ho fetola tlhophiso ea k'hamera habonolo, ho kenyelletsa: lebitso la khamera, protocol ea khamera, IP ea khamera, sekhahla sa baud, port, lebitso la mosebedisi, password, joalo-joalo PELCO-D, PELCO-P le VISCA protocols li tlhophiso ea sekhahla sa baud le setlhophiso sa khetho ea boema-kepe, liprothokholo tsa ONVIF le VISCA-IP li na le tlhophiso ea IP, 'me ONVIF e hloka lebitso la mosebelisi le tokiso ea senotlolo (li hloka ho ts'oana le khamera).

4.5 Setting ya boemo ba khamera

● Ho theha / ho theha li-presets:

Tsamaisa khamera sebakeng seo o se batlang, Kenya nomoro eo o e batlang ho keyboard ea alphanumeric, joalo ka "77" ebe o tobetsa konopo ea Preset ho boloka se seng.

● Ho letsetsa li-presets:

Kenya nomoro eo u e batlang pele ho konopo ea alphanumeric joalo ka "77", Tobetsa konopo ea Ho letsetsa.

● Ho tsosolosa / ho hlakola li-presets:

Kenya nomoro ea litlhophiso tseo u batlang ho li hlakola joalo ka "77", ebe o Tobetsa konopo ea Seta Botjha.

Khokahano ea taolo ea khamera ea 5.PTZ

6. Lisebelisoa

Taolo ena ea khamera ea PTZ e na le adaptara e le 'ngoe ea matla a 12V le sehokelo se le seng sa 9 PIN GPIO.

Litokomane / Lisebelisoa

LILLIPUT K1 PTZ Camera Joystick Controller [pdf] Bukana ea Mosebelisi K1 PTZ Camera Joystick Controller, K1, PTZ Camera Joystick Controller, Camera Joystick Controller, Joystick Controller, Controller

Litšupiso

• Bukana ea Mosebelisi