LED CTRL TX10 Touch Trigger

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Lebitso la Sehlahiswa: LED CTRL TX10 Touch Trigger
• Mohloli oa Matla: 12-24V DC
• Mananeo: Likonopo tse 8 tsa ketsahalo, selaete sa dimmer, konopo ea ON/OFF
• Sephetho sa DMX: Ee

Litaelo tsa Tšebeliso ea Sehlahisoa

Khokahano
TX10 e lokela ho hokela mohloling oa matla oa 12-24V DC. Hokela TX10 DMX Output ho kenyelletso ea DMX ea sesebelisoa se tlang ho qala.

Kabelo ea Channel ea DMX
TX10 Touch Trigger e na le liteishene tse lokiselitsoeng esale pele:

• Konopo TULA/TLOA:
  • On - E emisa li-trigger tsa DMX (CH 1 = 255)
  • E tima - E lumella li-trigger tsa DMX (CH 1 = 0)
• Likonopo 2-8: CH X = 255 (E butswe), CH X = 0 (E Tlohile)
• DIM Slider: E romela boleng bo pakeng tsa 0 le 255 ho ipapisitse le boemo ba selaete

Ho phahamisa
TX10 e etselitsoe hore e kenngoe ka lebokoseng le tloaelehileng la lebone la sehlopha se le seng. Likoti tse kenngoang ke 60.33mm bohareng ho ea bohareng, holimo le tlase.

Litlhophiso tsa ho sebelisoa ka PX24 kapa MX96PRO

• Mohato oa 1: Itokisetse ho Seta
  Netefatsa hore o na le karete ea microSD e loketseng e kentsoeng sekoting sa karete ea SD sesebelisoa sa PX/MX. Beakanya komporo ea hau e laolang le sesebelisoa sa PX/MX marang-rang a tšoanang (mohlala, liaterese tsa IP 2.0.40.1 le 2.0.40.2).
• Mohato oa 2: Khoasolla Configuration Files
  Khoasolla tlhophiso files ho tloha ho LED CTRL webSebaka sa marang-rang ho theha lits'oants'o le lits'oants'o tsa Likonopo tsa 1-8 le ho lokisa selaete sa dimmer.
• Hata 3: Latela Tokomane ea Mosebelisi ea CTRL ea LED
  Sheba Tokomane ea Mosebelisi ea LED CTRL le Tataiso ea Tlhophiso ea LED CTRL PX24_MXPRO bakeng sa mehato e qaqileng ea ho lokisa sesebelisoa.

Selelekela

• Tokomane ena e fana ka lintlha tsa tlhophiso e hlokahalang bakeng sa TX10 Touch Trigger hore e sebetse le PX24 kapa MX96PRO ha e hlahisa litšoantšo tse bolokiloeng ho SD Card, kapa ka LED CTRL (ka DMX converter) ho qala ketsahalo efe kapa efe.
• Ha ho na tlhophiso e ka khonehang ho yuniti ea TX10 ka boeona; ho e-na le hoo, tlhophiso e etsoa ho software ea PX/MX kapa ea LED CTRL ho arabela kamoo ho hlokahalang ho li-triggers.
• Tataiso ena e tla kenella likarolong tsohle tsa web Sehokelo sa tsamaiso bakeng sa lisebelisoa tsa PX24 le MX96PRO. Lisebelisoa tse ling, ho kenyeletsoa libuka tsa mosebelisi tse ikhethileng le firmware ea morao-rao, li ka khoasolloa mona: www.ledctrl.sg/downloads

TX10 Overview
TX10 Touch Trigger ke sesebelisoa se bonolo se nang le likonopo tse 8 tsa scene, selaete sa dimmer, le konopo ea ON/OFF.

Lintlha tsa khokahano ea TX10
TX10 e lokela ho hokahana le mohloli oa Matla oa 12-24V DC, ka TX10 DMX Output e hokahantsoeng le kenyelletso ea DMX ea sesebelisoa se lokelang ho hlahisoa:

Likabelo tsa TX10 DMX Channel
TX10 Touch Trigger e na le liteishene tse latelang tse hlophisitsoeng tse ke keng tsa fetoloa:

Konopo	On	E tima
BONAHALA/TSHA	E emisa li-trigger tsa DMX ho tloha ho romelwa	E lumella li-trigger tsa DMX ho rometsoe
1	CH 1 = 255	CH 1 = 0
2	CH 2 = 255	CH 2 = 0
3	CH 3 = 255	CH 3 = 0
4	CH 4 = 255	CH 4 = 0
5	CH 5 = 255	CH 5 = 0
6	CH 6 = 255	CH 6 = 0
7	CH 7 = 255	CH 7 = 0
8	CH 8 = 255	CH 8 = 0
DIM	E romela boleng bo pakeng tsa 0 le 255 ho latela sebaka se thellang

Thepa ea TX10
TX10 e etselitsoe hore e kenngoe ka lebokoseng le tloaelehileng la lebone la sehlopha se le seng. Likoti tse kenngoang ke 60.33mm bohareng ho ea bohareng, holimo le tlase.

E lokisa PX24 kapa MX96PRO ho fumana li-trigger

• Ha u sebelisa sesebelisoa sa PX kapa MX se nang le karete ea SD e kentsoeng (bakeng sa tšebeliso ntle le taolo ea hlooho ea hlooho ea LED CTRL), ho na le PX/MX Configuration. files ho u thusa ho qala. Sebopeho se bolokiloeng files e ka kopitsoa sebakeng sa Downloads sa LED CTRL websebaka: https://ledctrl.sg/downloads/
• Litlhophiso tsena files fana ka litšoantšiso bakeng sa liketsahalo tse abetsoeng Likonopo 1-8, tse nang le lintho tse susumetsang tse seng li hlophisitsoe ho qala ketsahalo e tsamaellanang ha konopo e 'ngoe le e 'ngoe e tobetsoa, ​​'me selaete sa dimmer se lokiselitsoe ho laola matla a tlhahiso.
• Tataiso ena ea tlhophiso e lokela ho baloa hammoho le Tokomane ea Mosebelisi ea CTRL ea LED (e fumanehang mona: https://ledctrl-user-guide.document360.io/) le Tataiso ea Tlhophiso ea LED CTRL PX24_MXPRO, e fanang ka lintlha tse mabapi le mehato e mengata tokomaneng ena.

Lokisetsa ho seta

• Mohato oa 1: Netefatsa hore o na le karete ea microSD e loketseng e kentsoeng sekoting sa karete ea SD sesebelisoa sa PX/MX.
  Tlhophiso files e tla beha PX/MX ID ea sesebelisoa ho IP 2.0.40.10 le subnet 255.255.255.0; ka hona, ho bonolo haholo haeba qalong u ka lokisa komporo ea hau e laolang le sesebelisoa sa PX/MX ho netweke ea 2.0.40.x ka tsela e latelang:

  Sesebelisoa	Aterese ea IP e tsitsitseng	Subnet
  Ho laola k'homphieutha	2.0.40.1	255.255.255.0
  PX kapa MX sesebelisoa	2.0.40.2	255.255.255.0

• Mohato oa 2: Khoasolla config e nepahetseng file ho tloha sebakeng sa Downloads sa LED CTRL websaete (e fumaneha mona: https://ledctrl.sg/downloads/).
• Mohato oa 3: Kenya config file ho sesebelisoa sa hau sa PX/MX ka skrine ea Maintenance ho Web Sebopeho sa Tsamaiso.

Litlhophiso tsa PX/MX tse hlophisitsoeng esale pele
Litlhophiso tse hlophisitsoeng esale pele tsa sesebelisoa sa PX/MX, joalo ka ha li bolokoa tlhophisong file li fumaneha bakeng sa ho jarolloa, li hlalositsoe ka botlalo mona.

• Litlhophiso tsa Sistimi:

  
  
• Aux Port
  Aux port e lokiselitsoe ho kenya letsoho ho DMX.

  

• Liphetho tsa Pixel
  • E hlophiselitsoe UCS7604 RGBW ka mokhoa o sa atolositsoeng:

    

  • Ho feta moo, leqepheng la Pixel Outputs, Live Intensity e lokiselitsoe ho mamela mocha oa 9 boema-kepeng ba AUX, o kentsoeng ho konopo ea Dimmer ho TX10.

    
• Lintlha tsa Pixel
  Boema-kepe bo bong le bo bong bo hlophisitsoe ka lipikselse tse ngata tse abetsoeng:

  

• Liketsahalo
  Sebaka sa sebaka sa konopo ka 'ngoe le phello ea OFF li hlophisitsoe esale pele:

  
• Lintho tse susumetsang
  • Sehlomathiso sa ho Bula le ho tima bakeng sa Konopo ka 'ngoe se lokiselitsoe esale pele:

    

  • 'Me mohloli o mong le o mong o hlophisitsoe ka mokhoa o ts'oanang ka tsela e latelang ho qala ketsahalo e amanang le eona ha mocha o tletse (konopo e tobetse), le ho tima phello ha mocha o behiloe ho 0 (konopo e lokolloa). Hlokomela hore phello ea OFF e kenyelletsa ho fifala ha motsotsoana o le mong:

    

Fetola litlhophiso kamoo ho hlokahalang.
Nahana haeba u hloka ho etsa litokiso life kapa life ho boleng bo hlophisitsoeng esale pele joalo ka ha ho hlalositsoe kaholimo, litokiso tse tloaelehileng tse ka hlokang ho etsoa ke tse latelang:

Skrine	Paramethara	Ea kamehla	E tima
Liphetho tsa Pixel	Mofuta oa Pixel	UCS7604	Beha ho chipset ea hau
Liphetho tsa Pixel	Mokhoa o Atolositsoeng	E sa Atolositsoeng	Fetolela ho Eketsoe haeba u sebelisa tse ling ho feta likou tse 4 sesebelisoa
Lintlha tsa Pixel	Lipikseli	765	Hlophisa ho tsamaisana le palo ea lipikselse boema-kepeng bo bong le bo bong ba instola ea hau

Etsa kopo 'me u boloke liphetoho leha e le life u sebelisa likonopo tse botlaaseng ba leqephe ka leng ho Web Sebopeho sa Tsamaiso.

Bula CTRL ea LED

• Hang ha u se u lokiselitse li-LED tse loketseng ho kenya, ke nako ea ho. Ho li-LED-> Window ea Hardware, u lokela ho bona sesebelisoa (skena hape ha ho hlokahala):

  

• Tobetsa ka ho le letona-> Numella ho nolofalletsa sesebelisoa pontsongfile
• Haeba pop-up e bolelang hore sesebelisoa se fetohile e hlaha 'Preserva All', e tla netefatsa hore litekanyetso tse bolokiloeng mohatong o ka holimo li bolokiloe.

www.ledctrl.com
LED CTRL TX10 Config Guide V20250118

LBH

Na yuniti ea TX10 ka boeona e ka hlophisoa?

Che, tlhophiso e etsoa ho software ea PX/MX kapa ea LED CTRL.

Litokomane / Lisebelisoa

LED CTRL TX10 Touch Trigger [pdf] Bukana ea Mosebelisi PX24, MX96PRO, TX10 Touch Trigger, TX10, Touch Trigger, Trigger

Litšupiso

• Bukana ea Mosebelisi