LAUPER INSTRUMENTS Gilibrator 2 USB Calibration System

Lintlha tsa Sehlahisoa: Sistimi ea ho lekanya ea Gilian Gilibrator 2

Gilian Gilibrator 2 Calibration System ke mokhoa oa ho lemoha khase o entsoeng ke Sensidyne, LP. E etselitsoe ho fana ka tekanyo e nepahetseng ea moea samplipompo tsa ling le moea o mong sampling
lisebelisoa. Sistimi e tla le Control Unit Base, Flow Cell Assembly (Phallo e Phahameng, Phallo e Tloaelehileng, Phallo e tlase, kapa tse tharo kaofela), AC USB Charger e nang le lisebelisoa tsa lehare tsa machabeng, thapo ea USB A/B, Tubing, Nyeoe e Nyenyane, Tharollo ea Sesepa & Dispenser, Setifikeiti sa Calibration, le Buka ea Ts'ebetso le Ts'ebeletso.
Setsi sa Taolo se na le likonopo, matšoao, le litlhaku tse bonts'ang ho etsa hore ts'ebetso e be bonolo. Seboka sa Wet Cell se na le likarolo tsa Bubble Generator le Sensor Block ho hlahisa phallo ea bubble.

Litaelo tsa Tšebeliso ea Sehlahisoa

Pele o sebelisa Gilian Gilibrator 2 Calibration System, etsa bonnete ba hore lintho tsohle tse thathamisitsoeng Lethathamong la Packing lia amoheloa. Haeba ho na le lipotso kapa thuso e hlokahalang, ikopanye le Sensidyne Sales Representative kapa letsetsa 800-451-9444 OR 727-530-3602.

Ho sebelisa Gilian Gilibrator 2 Calibration System, latela mehato e ka tlase:

1. Hokela Yuniti ea Taolo mohloling oa matla o sebelisa AC USB Charger le thapo ea USB A/B e fanoeng.
2. Hokela Kopano ea Phallo e loketseng ea Phallo (Phallo e Phahameng, Phallo e Tloaelehileng, Phallo e Tlase, kapa tse tharo kaofela) ho Setsi sa Taolo ea Unit Base.
3. Tlatsa Seboka sa Wet Cell ka tharollo ea sesepa u sebelisa Soap Solution & Dispenser e fanoeng.
4. Hokela Kopano ea Lisele Tse Metsi ho Kopano ea Phallo ea Lisele.
5. Hokela moea samppompo ea ling kapa moea o mong sampsesebediswa sa puo ho Seboka sa Wet Cell ka ho sebedisa Tubing.
6. Matla ho Setsi sa Taolo, 'me u latele litaelo tse fanoeng ho Buka ea Ts'ebetso le Ts'ebeletso ho hlahisa phallo ea bubble le ho lekanya moea s.amppompo ea ling kapa moea o mong sampseletsa sa ling.

Kamehla latela litaelo le litemoso tse fanoeng ho Buka ea Ts'ebetso le Ts'ebeletso le melao le melawana eohle ea mmuso, ea naha, le ea tikoloho ea tikoloho le ea bophelo bo botle le polokeho mosebetsing.

Lauper Instruments AG Irisweg 16B
CH-3280 Murten
Mohala +41 26 672 30 50
info@lauper-instruments.ch
www.lauper-instruments.ch

LENANE LA HO PAKA

Tse latelang li romelloa le Gilian Gilibrator 2 Calibration System Standard Kits:

• Control Unit Base
• Kopano ea Phallo ea Lisele (Phallo e Phahameng, Phallo e Tloaelehileng, Phallo e tlase, kapa tse tharo kaofela)
• AC USB Charger e nang le thapo ea lehare ea machaba ea USB A/B
• Tubing
• Nyeoe e Nyenyane ea ho Jara
• Sesepa Tharollo & Dispenser
• Setifikeiti sa Calibration
• Buka ea Ts'ebetso le Tšebeletso

Kamehla hlahloba ho netefatsa hore u fumane lintho tsohle tse thathamisitsoeng ka holimo.
Haeba u na le lipotso kapa u hloka thuso, ikopanye le Sensidyne Sales Representative, kapa u letsetse
800-451-9444
OR
727-530-3602

TSEBISO TS'OANELO
Buka ena e lokiselitsoe ke Sensidyne, LP feela bakeng sa mong'a Gilian Gilibrator 2 Calibration System. Boitsebiso bo ka har'a bukana ena ke boitsebiso ba mong'a Sensidyne, LP 'me bo lokela ho sebelisoa feela ho utloisisa, ho sebetsa le ho sebeletsa sesebelisoa. Ka ho amohela tokomane ena, moamoheli o lumela hore tokomane ena kapa tlhahisoleseling e senotsoeng ka hare kapa karolo efe kapa efe e ke ke ea hlahisoa hape kapa ea fetisoa, 'meleng, ka mokhoa oa elektroniki kapa ka mokhoa ofe kapa ofe kapa ho sebelisoa kapa ho nehelanoa ho ba bang bakeng sa tlhahiso kapa morero ofe kapa ofe ntle le ka ho khetheha e lumelletsoeng ka lengolo ke Sensidyne, LP.

TLHOKOMELISO MOKHOPI
© 2005, © 2008, © 2020 Sensidyne, LP. Litokelo tsohle li sirelelitsoe. Litaba tse teng tokomaneng ena li sirelelitsoe ke litokelo tsa molao. Ha ho karolo ea tokomane ena e ka kopitsoang, ea hlahisoa, kapa ea fetoleloa lenaneong le leng kapa tsamaisong e 'ngoe ntle le tumello e ngotsoeng pele ho Sensidyne, LP.

TSEBISO LETŠOAOA
Sensidyne, logo ea Sensidyne, Gilian, le logo ea Gilian ke matšoao a ngolisitsoeng a Sensidyne, LP Gilibrator 2 le letšoao la Gilibrator 2 ke matšoao a khoebo a Sensidyne, LP. Matshwao a kgwebo le matshwao a tshebeletso a Sensidyne, LP a sireleditswe ka tshebediso le ngodiso United States.

TSEBISO TS'OANELO
Buka ena e lokiselitsoe ke Sensidyne, LP feela bakeng sa mong'a Gilian Gilibrator 2 Calibration System. Boitsebiso bo ka har'a bukana ena ke boitsebiso ba mong'a Sensidyne, LP 'me bo lokela ho sebelisoa feela ho utloisisa, ho sebetsa le ho sebeletsa sesebelisoa. Ka ho amohela tokomane ena, moamoheli o lumela hore tokomane ena kapa tlhahisoleseling e senotsoeng ka hare kapa karolo efe kapa efe e ke ke ea hlahisoa hape kapa ea fetisoa, 'meleng, ka mokhoa oa elektroniki kapa ka mokhoa ofe kapa ofe kapa ho sebelisoa kapa ho nehelanoa ho ba bang bakeng sa tlhahiso kapa morero ofe kapa ofe ntle le ka ho khetheha e lumelletsoeng ka lengolo ke Sensidyne, LP.

TLHOKOMELISO MOKHOPI
© 2005, © 2008, © 2020 Sensidyne, LP. Litokelo tsohle li sirelelitsoe. Litaba tse teng tokomaneng ena li sirelelitsoe ke litokelo tsa molao. Ha ho karolo ea tokomane ena e ka kopitsoang, ea hlahisoa, kapa ea fetoleloa lenaneong le leng kapa tsamaisong e 'ngoe ntle le tumello e ngotsoeng pele ho Sensidyne, LP.

TSEBISO LETŠOAOA
Sensidyne, logo ea Sensidyne, Gilian, le logo ea Gilian ke matšoao a ngolisitsoeng a Sensidyne, LP Gilibrator 2 le letšoao la Gilibrator 2 ke matšoao a khoebo a Sensidyne, LP. Matshwao a kgwebo le matshwao a tshebeletso a Sensidyne, LP a sireleditswe ka tshebediso le ngodiso United States.

TEMOSO

BALA LE HO Utloisisa LITEMOSO TSOHLE PELE SEBELISA

BOHLOKOA TUMELO ELA
Lisele tse ngata tse phallang tse etselitsoeng setsi sa pele sa Gilibrator li lumellana le setsi sa motheo sa Gilibrator 2. Haeba phallo ea hau e teng e sa tsamaisane le setsi sa Gilibrator 2, yuniti e tla hlahisa SAMPLE# bala hang kamora ho qala. Haeba sena se etsahala, sele ea hau ea phallo e hloka ho khutlisetsoa Sensidyne hore e ntlafatsoe. Sheba Sehlomathiso sa C bakeng sa lintlha tse ling.

• Bala le ho utloisisa litemoso TSOHLE pele u sebelisa sehlahisoa sena. Ho hloleha ho bala, ho utloisisa, le ho latela litemoso TSOHLE ho ka baka tšenyo ea thepa, kotsi e mpe ea motho, kapa lefu.
• Bala le ho utlwisisa melao le melawana YOHLE e sebetsang ya Federal, State, le Local Environmental health and Safety, ho kenyeletswa OSHA. Netefatsa hore ho latelwa melao le melawana EOHLE e sebetsang pele le ka nako ya tshebediso ya sehlahiswa sena.
• HA HO MAEMO sehlahisoa sena se lokela ho sebelisoa haese basebetsi ba koetlisitsoeng, ba koetlisitsoeng, ba nang le litsebo tsa botekgeniki, eseng ho fihlela litemoso, Bukana ea Ts'ebetso le Ts'ebeletso, lileibole le lingoliloeng tse ling tse tsamaeang le sehlahisoa sena li balile le ho utloisisoa.
• Bukana ea Ts'ebetso le Ts'ebeletso e tlameha ho baloa le ho utloisisoa ke mosebelisi e mong le e mong pele a sebelisa sehlahisoa sena kapa a sebelisa lisebelisoa tsa sona, e le ho etsa bonnete ba ts'ebeliso e nepahetseng le e bolokehileng ea sehlahisoa sena le ho etsa bonnete ba ho tloaelana le mekhoa e nepahetseng ea kalafo le polokeho ha ho etsahala. kotsi.
• O SE KE oa tlosa, oa koahela, kapa oa fetola leibole efe kapa efe kapa tag sehlahisoa sena, lisebelisoa tsa sona, kapa lihlahisoa tse amanang le tsona.
• U SE KE UA sebelisa sehlahisoa sena haeba se sa sebetse hantle kapa se hloka ho lokisoa. Ts'ebetso ea sehlahisoa se sa sebetseng hantle, kapa sehlahisoa se hlokang ho lokisoa se ka baka kotsi e mpe kapa lefu. U SE KE UA leka ho lokisa kapa ho fetola sesebelisoa, ntle le ha ho boletsoe Bukeng ea Ts'ebetso le Ts'ebeletso. Haeba ho hlokahala ho lokisoa, ikopanye le Lefapha la Tšebeletso la Sensidyne ho lokisetsa Returned Material Authorization (RMA).
• Sebelisa FEELA likarolo tse ncha tsa SENSIDYNE® tsa 'nete ha u etsa mekhoa ea tlhokomelo e hlalositsoeng bukeng ena. Ho hloleha ho etsa joalo ho ka senya ts'ebetso ea sesebelisoa haholo. Ho lokisoa kapa ho fetoloa ha sehlahisoa ho feta tekanyo ea litaelo tsena tsa tlhokomelo, kapa ke mang kapa mang ntle le mosebeletsi ea lumelletsoeng oa SENSIDYNE®, ho ka etsa hore sehlahisoa se hlolehe ho sebetsa joalo ka ha se hlophisitsoe mme batho ba itšetlehileng ka sehlahisoa sena bakeng sa polokeho ea bona ba ka boloka botho bo matla. kotsi kapa lefu.
• TIMA sesebediswa ka mehla pele o fetola dibetri dife kapa dife.
• Sebelisa FEELA Tharollo ea Sesepa Karolo ea No. 800450 le Kopano ea Lisele tsa Wet Flow. Tšebeliso ea lisebelisoa tse ling tsa sesepa e ka senya Flow Cell.
• Sebelisa sesepa feela sa Gilibrator. Ho kenya litharollo tsa sesepa tse ling tsa khoebo ho ka baka tšenyo. Tšebeliso ea litharollo tsa sesepa tse nang le joala kapa lihlapolli tse ling li ka baka tšenyo libakeng tse khomaretsoeng le ho fifala ha sele ea phallo.
• Sebelisa feela latex tubing ho hokahanya le Gilibrator. Tšebeliso ea mefuta efe kapa efe ea li-tubing, haholo-holo li-tubing tsa vinyl, li ka lebisa ho robeheng ha lisebelisoa tsa Gilibrator.
• Ha o tlosa kapa o nkela sebaka sa sele ea phallo holim'a thaba ea bayonet ea motheo, tšoara sele ea phallo ka tlase. Ho tšoara sele e phallang ka holimo ho ka baka ho robeha ha likarolo tsa sele tse khomaretsoeng.

LIEKETSENG

FEELAVIEW

• The Gilian Gilibrator 2 Calibration System ke Tekanyetso ea Motheo e bonolo ho e sebelisa bakeng sa ho lekanya moea s.amplisebelisoa tsa mang. Sistimi e kenyelletsa ho nepahala ho phahameng, flowmeter ea elektroniki e fanang ka lipalo tsa phallo ea moea hang hang le kakaretso ea kakaretso ea s.amples. Likopano tse tharo tsa Wet Cell li fana ka mefuta e mengata e fapaneng ea litekanyetso tsa phallo 'me li feto-fetoha habonolo ho sebelisa twist-on/off mounting.
  Setsi sa Taolo ea Microprocessor e laoloang ka kristale e etselitsoe ho bala lintlha tse nepahetseng. Konopo e 'meli ea DELETE/RESET ho Setsi sa Taolo e tlosa ho bala ho fosahetseng ho netefatsa lintlha tse nepahetseng, kapa e ka hlakola lipalo tsa hajoale ka botlalo.
• Sekepe sa serial sa 9-pin se tona sa RS-232 se Setsing sa Taolo se u lumella ho ntša sampLiphetho tsa ling ho printa, komporo, kapa tse tsamaellanang samplipompo tsa ling le liteishene tsa boema-kepe. Sehokelo sa USB-B ho Setsi sa Taolo se lumella tlhahiso ho komporo. Windows™ e sebeletsanang le Gilibrator 2 Flow Monitoring Software ea fumaneha e u lumellang ho bokella, ho boloka le ho phalla ha morero.amples.
• Likarolo tsa Gilibrator 2 Calibration System li kenyelletsa pontšo e bonolo ho bala; ponahatso ea nako e le 'ngoe ea sekhahla sa phallo, karolelano ea phallo, le palo ea samptse nkiloeng; bonts'a litsupa bakeng sa LOW BAT, LETA; le ho tima motlakase ka boiketsetso ha yuniti e sa sebetse ka metsotso e 15. U ka boela ua bolela palo ea samptse lokelang ho nkuoa (5 ho isa ho 95) ka metsotsoana e 5ample increments.
• Gilibrator 2 Calibration System Kits e kenyelletsa Seboka sa Wet Cell, Control Unit Base (CE e amohelehang), adapter ea matla a lebota la USB, cable ea USB (bakeng sa ho tjhaja betri le puisano), Tubing, le Soap Solution & Dispenser.
• Likopano tsa Lisele tsa Phallo tse Fetohang li fumaneha ka tsela e latelang:
  • Phallo e Tlase ea Metsi (1 ho isa ho 250 cc/m)
  • Selaele se Tloaelehileng sa Metsi (20 cc/m ho isa ho 6 LPM)
  • Mela e Metsi e Phallang e Phahameng (2 ho isa ho 30 LPM)

KHOPOLO TS'EBETSO

• Ho ba tekanyetso ea mantlha, litekanyetso tsohle li tlameha ho ba tse felletseng le tse lekantsoeng e le tse felletseng. Tekanyo e ka sehloohong e tloaelehileng ea ho phalla ha moea ke molumo o arotsoeng ka nako ea nako joalokaha e etsoa ke Sehlopha sa Taolo ea Gilibrator 2. Molumo (V) o lekantsoe sebaka sa sebaka pakeng tsa li-sensor tse peli tsa beam-break infrared. Nako (t) ke nako eo e hlokahalang hore bubble ea filimi ea sesepa e tsamaee lipakeng tsa lisensara tse peli tse tlamellang molumo. Ka hona, molumo ka nako ea nako (V / t) e fetoha sekhahla sa phallo. Hobane oache ea elektroniki e nepahetse haholo ho feta litekanyo tsa molumo, ho nepahala ha tekanyo ea molumo ho etsa qeto ea ho nepahala ha kakaretso ea yuniti.
• Gilibrator 2 e na le likarolo tse peli, Seboka sa Lisele tsa Phallo ea Metsi le Setsi sa Taolo. Mosebetsi oa Flow Cell Assembly ke ho fana ka mokhoa oa ho metha bubble ea filimi ea sesepa e tsamaeang ka har'a phallo ea phallo ka bongata bo tsebahalang ba sebaka.
• Tekanyo ea nako ea leeto e etsoa ka "top" le "bottom" infrared sensors tse kenngoeng haufi le phallo ea phallo. Molumo o tlanngoeng ke li-sensor tsena o behiloe ka nepo ho maemo a mantlha a molumo.
• Ha bubble e nyoloha ka har'a tube, e theola kutlo e tlase. Ha e ntse e nyoloha ka har'a tube, e theola sensor e holimo. Phapang ea nako lipakeng tsa li-sensor tse tlase le tse holimo e fetoha nako ea maeto e fetileng. Tlhahisoleseling ena ea nako (hammoho le tlhaiso-leseling ea molumo) e romelloa ho microprocessor ho Control Unit Base. Phallo e baliloeng le sampLintlha li hlahisoa ka kotloloho ho Liquid Crystal Display.

LIEKETSENG

TAOLO LEBUSA

The Control Unit (sheba Lipalo 2.1 & 2.2) e na le tsamaiso ea nako ea microprocessor e laoloang ka kristale. Mofuta ona oa microprocessor, o sebelisoang hammoho le software e hahelletsoeng, o fana ka mokhoa o nepahetseng haholo oa ho bala litekanyo tsa sekhahla sa phallo.
The Control Unit e na le likarolo tse latelang:

Likonopo & Lipontšo

Likonopo tsa ON le OFF li bulela le ho tima Yuniti ea Taolo.
Konopo ea DELETE/RESET e na le mesebetsi e meraro:

• Ho tobetsa hakhutšoanyane ho hlakola 'malo oa morao-rao ho tsoa ho palohare e sebetsang. E tsosolosa karolelano le sample nomoro ho palo e fetileng. Haeba printa e hoketsoe, ho hatisoa letšoao la ho tlosa 'me palo e khutlela ho boleng bo fetileng. Haeba komporo e hokahane, letšoao la ho tlosa le tla hlaha sebonong sa komporo mme karolelano e khutlela boleng bo fetileng.
• Ho tobetsa bakeng sa metsotsoana e 3 ho khutlisetsa 'malo oa hajoale ho zero ebe o qala samptatellano ea ling. Haeba printa e hoketsoe, e hatisa hlooho e ncha. Haeba Flow Monitoring Software e ntse e sebetsa, kerafo ea eona e tla hlaka le samptatellano ea ling e tla qala.
• Ho tobetsa ka nako e le 'ngoe le konopo ea ON ho beha sample boholo. The sampboholo ba le bo fetotsoe ka 5 sample increments ka ho tobetsa khafetsa DELETE/RESET (range: 5–95).
• Lefapha la ho lefisa
  LED ena e mebala e meraro e bontša maemo a 'maloa
  • E tima: Ho sebetsa ka tloaelo ka matla a betri
  • Khubelu: Betri ea tjhaja
  • Botala: Betri e qetile ho tjhaja
  • Yellow Blink: Betri e Tlase
  • Violet: Phoso ea betri kapa mocheso o fetang
  • Boputsoa: Ho qala Flash kapa Mokhoa oa ntlafatso oa Firmware

Bontša Litlhaku

• TS'ELISO
  Sena se bonts'a sekhahla sa phallo ho li-cubic centimeters ka motsotso (ccm) kapa lithara ka motsotso (lpm) ho ipapisitse le Flow Cell Assembly e sebelisitsoeng.
• KAKARETSO
  E bonts'a sekhahla sa phallo se tloaelehileng bakeng sa samptse nkiloeng.
• SAMPTHE #
  E bonts'a palo ea samptse nkiloeng (MAX = 99).
• BATANE MOLEFI
  Tlhokomeliso ena e tla hlaha haeba tjhaji e sa lekaneng ea betri e sa ntsane e sebetsa hantle. Haeba betri e sa tjhajwa, yuniti e itswala hang ka mora hore molaetsa ona o hlahe.
• LETELA
  E bontša hore ho na le tekanyo ea phallo e ntseng e tsoela pele.
• PHOSO 1
  E supa bothata ka Flow Cell kapa khokahanyo ea thapo.
• PHOSO 2
  E bonts'a bothata mabapi le khokahano ea betri. Haeba molaetsa ona o hlaha, ka kopo letsetsa feme.

Likarolo tsa Interface

USB
Ho fanoe ka sehokelo sa USB-B ho matlafatsa yuniti, ho tjhaja betri, le ho fana ka puisano ea data komporong.
Ho tjhaja betri ho hloka mohloli oa matla oa USB o nang le bonyane bokhoni ba 500mA. Ho tjhaja ho tla kgaotsa dihora tse 12 ka mora ho hokela motlakase wa USB, kapelenyana ha betri e tjhajilwe. Hlakisa betri ka botlalo pele o sebetsa ka matla a betri.
Gilibrator 2 Flow Monitoring Software e fumaneha bakeng sa tšebeliso ea Windows PC.

Serial Port
Tekanyetso, RS-232, D-Sub, 9-pin, monna, sehokedi se dumella yuniti ho hokelwa ho printa kapa s e tsamaellanangamppompo e nyane. Moea o mong samplipompo tsa ling, tse kang GilAir Plus, li ka itekanya ka ho fumana lintlha tse tsoang ho Gilibrator 2. Ho hlokahala cable e khethehileng ho hokahanya seteishene sa boema-kepe sa GilAir Plus ho ea 9-pin serial port ho Gilibrator-2.
Liprinta li tlameha ho tšehetsa RS-232 (9-pin kapa 25-pin) 'me li hlophisoe bakeng sa 2400 Baud, 8N1, e nang le line-feed ea othomathike ho Carriage Return.
Printer Kit ea fumaneha, e nang le printa ea mocheso e lokiselitsoeng esale pele le thapo ea serial port e tsamaisanang.

Kopano ea Cell Interface Cable
Mohatla oa "pig-tail" oa 9-pin o tsoang ka morao oa yuniti o hokahana le sehokelo sa mating se ka morao ho kopano ea sele ea phallo.

TLHOKOMELO
Khokahano ea Flow Cell HA e tsamaellane le RS-232. U SE KE UA hokela sena ho sesebelisoa sa serial port.

KOPANO YA SELE SA MOLA

The Wet Flow Cell Assembly (sheba Setšoantšo sa 2.3) e na le Bubble Generator le Sensor Block. E 'ngoe le e' ngoe ea jenereithara ea Bubble e boholo ba ho hlahisa filimi ea bubble e otlolohileng ho pholletsa le bophara ba phallo ea phallo ea phallo. Bubble e tsamaisoa ke moea ho tloha tlase ho ea holimo ho tube. Ha bubble e ntse e feta li-sensor tse peli tsa infrared, sensor e 'ngoe le e' ngoe e fetisetsa letšoao ho Setsi sa Taolo se bontšang ho feta ha filimi ea bubble. Konopo ea letsoho ho Flow Cell Assembly e qala filimi ea bubble leetong la eona ho nyoloha ka tube.

Wet Cell Assemblies e tla ka boholo bo meraro:

• Phallo e tlase (1 ho 250 ccm)
• Phallo e Tloaelehileng (20 ccm ho isa ho 6 lpm)
• Phallo e Phahameng (2 ho 30 lpm)

Likarolo tsa jenereithara ea Bubble

Bubble Jenereithara e sebelisa tharollo e khethehileng ea sesepa ho hlahisa li-bubble. Sesepa sena se kopantsoeng ka ho khetheha sa masala a tlaase se etselitsoe ho fana ka matla a phahameng a filimi le ho lumellana le thepa e sebelisoang Kopanong ea Flow Cell.

TLHOKOMELO
Sebelisa feela Karolo ea Tharollo ea Sesepa No. 800450 le Kopano ea Lisele tse Wet. Tšebeliso ea lisebelisoa tse ling tsa sesepa e ka senya Flow Cell.

Pulsation Damper
Sena se ahiloeng damper e etsa hore ho be le pulsation efe kapa efe ka har'a moea le ho fokotsa ho sisinyeha ha filimi ea bubble, ho netefatsa ho nepahala ho hoholo.

Bubble Qala Konopo
Konopo ena e theola reng ea "Bubble Generator Ring" ka har'a pokello ea tharollo ea sesepa. Ha konopo e lokolloa, selikalikoe se phahamisa ka ntle ho tharollo ea sesepa 'me bubble ea filimi e hlahisoa ho pholletsa le ho buloa ha phallo ea phallo.

Sekhahla sa Bubble
Bubble Breaker ke kamore ea bobeli e karolong e ka holimo ea sele e phallang e fanang ka bubble ea sesepa e tsamaeang ka tsela e potlakileng ea katoloso. Sena se thusa ho pshatla bubble. E boetse e thibela ho koloba ka mokhoa o feteletseng oa lerako ka filimi ea sesepa mme e lumella hore e khutlele botlaaseng ba sele.

KELETSO
Bakeng sa ho nepahala ho holimo, ema ho fihlela bubble e fetileng e hlaha pele o qala bubble e ncha.

Storage Tubing
Tubing ea polokelo e thibelang ho qhalana e hokahanya liphaposi tsa lisele tse ka holimo le tse ka tlaase 'me e thibela tharollo ea sesepa hore e se ke ea fetoha mouoane. Mouoane o ka etsa hore motsoako oa tharollo ea sesepa o fetohe.

TEMOSO EA LITSAMAI!
Ha o tsamaisa Wet Cell Assembly ka sefofane, kgaola Storage Tubing ho tswa ho Air Outlet Boss (kahodimo) kapa Air Inlet Boss (tlase). Sena se thibela Seboka sa Flow Cell hore se se ke sa hatelloa mme mohlomong sa baka ho phatloha ka hare ho Bubble Jenereithara.

Sensor Block
Ho pota-pota phallo ea phallo le e sireletsehileng pakeng tsa kamore e ka holimo le e ka tlaase ea jenereithara ea bubble, ke Sensor Block (sheba Setšoantšo sa 2.4). Sebaka sena se kenyelletsa li-sensor tsa infrared tse tlase le tse holimo tse sebelisetsoang nako ea motsamao oa li-bubble ka Flow Cell. Sebaka sena se sirelelitsoe Kopanong ea Jenereithara ea Bubble ka li-screws tse peli tse notlelang, tse lumellang ho tlosoa habonolo ha Sensor Block bakeng sa tlhokomelo ea Flow Cell.

TLHOPHISO

SETS'ELISO SEHLOHO

• Karolo ena e hlalosa mehato e hlokahalang ho theha Gilibrator 2 Calibration System. Sena se kenyelletsa ho seta ha pele, ho kenya Seboka sa Cell, ho hokahanya cabling, ho eketsa tharollo ea sesepa ho likopano tsa lisele tse metsi, le ho theha s.ampmohloli oa ling. Setšoantšo sa 3.1 se bontša kamoo Sistimi e felletseng ea Gilibrator 2 e ka hlophisoang.
• Sheba Lipalo 3.2 & 3.3. Etsa mehato e latelang ho kenya Seboka sa Seboka.
• Pele o seta, etsa bonnete ba hore o hokile yuniti hantle ho adaptara ea matla ea USB e fanoeng, kapa mohloli o mong oa matla oa USB o khonang ho fana ka 5V le bonyane 500mA. Haeba matla a USB a hoketsoe hantle, Charge LED e lokela ho ba khubelu ho fihlela betri e tjhajiloe ka botlalo.
• Haeba u rera ho sebelisa Gilibrator 2 tšimong, etsa bonnete ba hore yuniti e qositsoe ka botlalo (bonyane lihora tse 14) pele o sebetsa yuniti. Haeba u rera ho sebelisa yuniti e ka lab (ke hore, haufi le sebaka sa lebota sa AC), u ka tsoela pele ka ho seta le ho sebetsa hang-hang.

BOHLOKOA TUMELO ELA

Boholo ba lisele tse phallang tse etselitsoeng motheo oa Gilibrator oa mantlha li tsamaisana le yuniti ea hau e ncha ea Gilibrator 2. Haeba phallo ea hau e teng e sa tsamaisane le setsi sa Gilibrator 2, yuniti e tla hlahisa SAMPLE# bala hang kamora ho qala. Haeba sena se etsahala, sele ea hau ea phallo e hloka ho khutlisetsoa Sensidyne hore e ntlafatsoe. Sheba Sehlomathiso C (leqephe la 28) bakeng sa boitsebiso bo eketsehileng.

KOPANO YA SELE

Cell Assembly Mounting

TLHOKOMELO
Kamehla phahamisa kapa u tlose Seboka sa Cell ka ho tšoara le ho potoloha feela karolo e ka tlase ea kopano.

1. The Control Unit Base e lokela ho behoa sebakeng se bataletseng, se lekaneng.
2. Khetha Seboka sa Lisele se loketseng (Botlase, Boemo, kapa bo Phahameng).
3. Tšoara karolo e ka tlase ea Seboka sa Lisele 'me u e ise ho Mounting Plate ho Unit Control.
4. Ha karolo e ka pele ea Seboka sa Lisele e shebile ka ho le letona (sheba Setšoantšo sa 3.2), theola kopano holim'a Mounting Plate Sebakeng sa Taolo.
5. Lokisetsa Lithakhisa Tse Tlamang Seleng e Phallang le Li-slots tse Mounting Plate (sheba setšoantšo sa 3.3). Haeba ho lokisoa ho atlehile, karolo e ka tlase ea Flow Cell e lokela ho phahama le Mounting Plate.
6. Ha u ntse u tšoara feela karolo e ka tlaase ea Seboka sa Flow Cell, e fetole ka tsela e ts'oanang le oache ho fihlela e "tobetsa" sebakeng. Karolo e ka pele ea Seboka sa Cell e lokela ho shebana le ponts'o ea Unit Control.

   

Lihokelo tsa Cabling

Ha o kenya Wet Cell ho Control Base, kenya 9-Pin Interface Plug ho tloha ho Control Base ka ho toba ho Connecting Jack e ka morao ho Wet Cell (sheba setšoantšo sa 2.3). Etsa bonnete ba hore o kopanya lihokelo hantle pele o kopanela.
Ha u sebelisa printa ea boikhethelo bakeng sa litekanyo tsa khatiso tsa nako ea 'nete, hokela printa ho sehokelo sa 9-pin Serial Port se ka lehlakoreng le letšehali la Control Unit Base. Etsa bonnete ba hore thapo le lihokelo tsa Serial Port li ikamahanya hantle pele u tobetsa thapo ho sehokelo. Matla ho printa. Gilibrator-2 e tla fetisetsa mongolo oa hlooho ho printa ha e lemoha hore sesebelisoa se hoketsoe, se kenyelletsang lintlha tsa sesebelisoa mme se fana ka sebaka sa hore opareitara a ngole letsatsi le linomoro tsa serial. Ho etsa hore Gilibrator-2 e hatise hlooho hape, tobetsa feela konopo ea "ON".

Ho eketsa Tharollo ea Sesepa

TLHOKOMELO
Sebelisa feela Karolo ea Tharollo ea Sesepa No. 800450 le Kopano ea Flow Cell. Tšebeliso ea lisebelisoa tse ling tsa sesepa e ka senya Flow Cell.

Kenya tharollo ea sesepa yuniti ka tsela e latelang:

1. Tlosa Storage Tubing ho Mookameli oa Air Outlet (bona Setšoantšo sa 2.3) sa Phallo Cell. Tlatsa botlolo ea dispenser e fanoeng ka tharollo ea sesepa sa Gilibrator. U sebelisa rabara Storage Tubing e le funele, butle-butle eketsa sesepa sa sesepa ho tloha ka mochine (sheba Setšoantšo sa 3.4).
2. Palo ea sesepa e hlokahalang e khethoa ka ho hatella konopo ea Bubble Initiate le ho e boloka sebakeng se tlaase. Tsoela pele ho eketsa tharollo ea sesepa e lekaneng ho fihlela moeli o nang le angled o ka tlaase ho Bubble Generator Ring o qoelisoa ka tharollo.
   TLHOKOMELO
   U se ke Ua Tlatsa Haholo
3. Kamora ho tlatsa ho phetheloa, rabara Storage Tubing e ka tlosoa ka botlalo. Khutlisetsa botlolo ea sesepa sa sesepa hore u se sebelise hamorao.

HLOKOMELA
Haeba Seboka sa Wet Cell se ke ke sa sebelisoa nako e telele, kenya hape Rubber Storage Tubing pakeng tsa ho kena le baokameli ba thepa. Sena se thibela tharollo ho tsoa mouoane le ho fetola motsoako oa sesepa ka har'a tharollo.

TLHOKOMELO
Haeba o tsamaisa Wet Cell, o tlameha ho tlosa Rabara Storage Tubbing pakeng tsa ho kena le baokameli ba kantle.

Sampling Source Connection
Hokela moea sampler ho lekanyetsoa ho Mookameli oa Air Out- Letlole la Kopano ea Lisele tse Metsi. Sebelisa li-tubing tsa 1/4 "ID maemong afe kapa afe.

TSEBISO LESELI
Sefi se metsi pakeng tsa sampler le Seboka sa Wet Cell se khothalelitsoe. Sena se thibela mongobo ho fetela ho sampler nakong ea linako tsa calibration tse tsoelang pele.

TS'EBETSO

E QALANG

Bulela sampmohloli oa ling.
Tobetsa Button ea ho Qala ea Bubble ka makhetlo a 'maloa ho kolobisa marako a ka hare a phallo ea phallo. U ke ke ua khona ho qalisa bubble ea nako ntle le ho qala "priming" tube ea phallo. U tla ba le maikutlo a ho hlahisa bubble ka boikoetliso.
Ka mor'a hore marako a Flow Tube a hlahisoe, tobetsa konopo ea ON ho Unit Control. Yuniti e tla romella mohala oa hlooho ho printa kapa komporo (haeba e hokahane).

MOTS'OAOA BUBULE

1. Bakeng sa ho hlahisa bubble ka botlalo, tobetsa konopo ea "Bubble Initiate" 'me u hatelle ho kenya bubble ea pele ho nyoloha ka phapupo ea phallo. Tlosa konopo ho qala bubble ea bobeli ho nyoloha ka Flow Tube. Pheta ts'ebetso ena ho fumana lintlha tse eketsehileng. Ena e tla ba mokhoa o tloaelehileng oa ho etsa li-bubble tse hloekileng, tse tsitsitseng.
2. Ha bubble e phahamisa Flow Tube, e qala tatellano ea nako ha e feta sensor e tlase mme e phethela tatellano ea nako ha e feta sensor e ka holimo. Tlhahisoleseding ea nako e ntan'o fetisetsoa setsing sa taolo moo ho etsoang lipalo tse hlokahalang 'me ho hlaha palo ea phallo skrineng.

TLHOKOMELO
Haeba bubble e robeha pele tatellano ea nako e phethoa, nako e tla tsoelapele ho fihlela bubble e 'ngoe e hlahisoa ho khopisa sensor e kaholimo. Sena se baka 'malo o fosahetseng' me se lokela ho tlosoa ho palo e tloaelehileng ka ho tobetsa Konopo ea DELETE bakeng sa motsotsoana o le mong.

Haeba mochine oa khatiso o sebelisoa, etsa bonnete ba hore o qetile tatellano ea oona ea khatiso pele o tobetsa konopo ea DELETE/RESET. Ha konopo ena e tobetsoa ka nako e ka tlaase ho motsotsoana o le mong, letšoao le lebe le hlaha skrineng ea Control Unit. Mohatisi o boetse o qala mola o bonts'ang ho tlosa hona. Haeba khomphutha e hoketsoe, ho tlosa hona ho hlaha skrineng sa komporo.

TS'OALANG KHABANE

Pontšo
Setsi sa Taolo se bonts'a phallo ea 'nete bakeng sa sample, hammoho le kakaretso ea sekhahla sa phallo e akaretsang ho pholletsa le kamples, le ea hajoale sample nomoro.
Ho hlakola 'malo oo ho hlakileng hore ke oa bohata (hangata o bakoa ke bubble e phatlohileng), tobetsa konopo ea DELETE/RESET hakhutšoanyane. Sena se hlakola ka bohona tlhahisoleseding ea bohata ho tloha ka karolelano. Ka karolelano le
sampnomoro e khutlela ho 'malo o fetileng.
Ho qala hape tatellano eohle, tobetsa konopo ea DELETE/RESET bonyane metsotsoana e 3. Sena se felisa sampka hare ho Yuniti ya Taolo, mme e etsa hore mohatisi (kapa komporo) a supe mola o le mong mme a hatise hape (kapa a bontshe hape) dihloho tsa tatelano. Sena se bolela ho qala ha tatellano e ncha.

Mohatisi
Mohatisi o tla hatisa ka tatelano phallo, karolelano, le sample palo ea 'malo o mong le o mong oa bubble o latellanang.

POLOKO LE KHABANE

POLOKO
Gilibrator 2 e etselitsoe hore ho be le tlhokomelo e nyane. Leha ho le joalo, ho hloekisa nako le nako, ho lekanya le ho nkela sebaka sa Damper Diaphragm on the Wet Cell Assembly e ka hlokeha ho netefatsa lilemo tsa ts'ebetso e se nang mathata.

Nako e khutšoane
Koala Yuniti ea Taolo, sampling, le lisebelisoa life kapa life tse hoketsoeng tse hlahisoang (haeba ho hlokahala). Haeba yuniti e tla sebelisoa letsatsi le letsatsi, tlosa moea sampler kgokelo. Haeba u sebelisa Wet Cell Assembly, hokela Storage Tubing ho bobeli ba Air Outlet Boss (ka holimo) le Air Inlet Boss (tlase). Hokela thapo ea USB mohloling oa matla. Hlahisa yuniti ka bosiu bo le bong (lihora tse 14) bakeng sa ts'ebeliso ea letsatsi le hlahlamang.

Nako e telele
Haeba Gilibrator e sa lokela ho sebelisoa ka nako e telele, sebelisa mekhoa e latelang ho boloka unit e sebetsa hantle.

1. Hakolla Kopano ea Cable ho sehokelo sa Seboka sa Sele.
2. Tlosa Seboka sa Lisele ho Setsi sa Taolo (Base) ka tatellano e ka morao eo e neng e kentsoe ka eona.
3. Tšela tharollo ea sesepa ho tsoa ka Seleng ea Phallo ka Mookameli oa Inlet Air. Ho etsa sena, tšoara Wet Cell Assembly ka ho otloloha (Air Inlet Boss haufi le fatše), 'me u sekamise kopano ho fihlela Mookameli oa Air Inlet a theoleloa tlase ka angle ea 45.
4. Tsoela pele ho ts'oara Seboka sa Flow Cell ka holimo ho fihlela motsoako oa sesepa o tšolohile.

TLHOKOMELO SELE MOFOLO

TLHOKOMELO
Le ka mohla u se ke ua sebelisa joala, acetone kapa lisebelisoa tse ling tse thata ho hloekisa sele ea jenereithara ea bubble.

Tlhokomelo e Akaretsang

1. Sheba Lipalo 2.4 le 4.1. Tlosa Sensor Block ka ho lokolla li-screw tse 2 le ho theola boloko ho tsoa le hole le Seboka sa Lisele.
2. Tlosa Theipi ea Tšireletso molomong oa Damper Seboka sa Plate.
3. U sebelisa sekoti se senyenyane sa blade blade screw driver, phahamisa Damper Plate sebelisa notch pakeng tsa kamore e ka holimo le sekwahelo.
4. Tlosa Spacer 'me joale e ntan'o ba Letlapa la Bubble Breaker. Sena se fana ka phihlello e felletseng kahare ho Flow Cell Tube. Tsamaisa metsi a hlakileng ka seleng ho fihlela metsi a tsoang ka seleng a hlaka. Tobetsa sele pele le morao ho tšolla metsi ohle a feteletseng.
5. Kenya sebaka sa "Bubble Breaker Plate" 'me u behe setsi sa Air Outlet Boss ka lesoba le leholo la poleiti. Kenya spacer.
6. Ho nkela sebaka sa Damper ho kopanya Plate, kolobisa O-ring ka tharollo ea sesepa ebe o tobetsa Damper Plate ho kena ka holimo ho Upper Cell Chamber. Sebelisa menoana ea hau ho petelletsa poleiti ka har'a kamore e kaholimo ea phallo ea sele.
7. Kenya Safety Tape molomong oa Damper Seboka sa Plate.
8. Kenya sebaka sa Sensor Block Assembly. Sireletsa boloko ho Seboka sa Cell ka ho tiisa lisekere tse notlelang.

TLHOKOMELO
Le ka mohla u se ke ua sebelisa boima ba 'mele oa hau ho Bubble Jenereithara ho hatella poleiti sebakeng sa eona. Boima bo feteletseng ho Seboka sa Cell bo ka baka ho senyeha

Dample Plate Diaphragm

Sheba Setšoantšo sa 4.1 'me u etse mokhoa ona ka tsela e latelang:

1. Tlosa Theipi ea Tšireletso ho pota-pota molomo oa Damper Kopano ea Plate. U sebelisa screwdriver e nyane ea lehare, tlosa Damper Plate e tsoang Kamoreng e Phahameng ea Lisele e sebelisang notch e fanoeng. Tlosa O-ring e kholo le Pulsation Dampjoalo ka diaphragm.
2. Ho nkela sebaka, beha diaphragm e ncha bohareng ba Damper Phatlalatsa lesoba 'me u kenye selikalikoe sa O holim'a diaphragm le ho kena ka har'a O-ring groove. Haeba wrinkles etsahala, pheta mokhoa ona ho finyella ho behoa boreleli.
3. Bubble the O-ring of Damper Plate ebe o tobetsa ka Upper Cell Chamber. Kenya Safety Tape molomong oa Damper Seboka sa Plate.

Tlhokomelo e Eketsehileng ea Lisele Tse Metsi

Leakage Check: Sistimi e lokela ho ts'oaroa ho 13 ”H2O ka ho hokela manometer ho mookameli oa sephutheloana ebe o tlosa sephutheloana ho 13” H2O. Ha ho na leakage e lokelang ho bonoa.
Calibration: Ho khothaletsoa hore yuniti e khutlisetsoe femeng selemo le selemo hore e lokisoe. Ikopanye le Lefapha la Tshebeletso la Sensidyne bakeng sa nomoro ya RMA, tlhahisoleseding, le ditheko (sheba Sehlomathiso sa C).

HLOKOMELA
Ntlafatso ea pele e tlameha ho etsoa selemo ho tloha ka letsatsi leo u fumanang Gilibrator 2 ea hau, ho sa tsotelehe hore na letsatsi le leqepheng la setifikeiti ke lefe.

Lipalangoang tsa Tsamaiso: Ha ho tsamaisoa yuniti, haholo-holo ka moea, ke habohlokoa hore lehlakoreng le leng la tube ea tiiso e kopanyang mookameli oa ho kena le ea ho tsoa, ​​e tlosoe ka tsela eo ho lumella ho lekana khatello ea ka hare ka hare ho jenereithara. Se ke oa tsamaisa yuniti e nang le tharollo ea sesepa kapa li-tubing tsa polokelo sebakeng.

TLHOKOMELO
U se ke Ua Khatella Kopano ea Sele! Khatello e feteletseng e ka etsa hore sele e phatlohe, e leng se fellang ka kotsi ea motho

MAHLOMOLA LEROTHA

Li-Calibration Kits
Motheo: Yuniti ea Taolo, Charger ea Betri, Case Carying, Certificate ea Calibration, Manual, le Low, Standard, kapa High Flow Wet Cell e nang le li-tubing, tharollo ea sesepa, le dispenser).
Tlhahlobo: Kit ea motheo, hammoho le Panel ea Calibration.
Deluxe: Basic Kit, hammoho le Printer Module le Lisele tse Metsi tse tharo kaofela.
Deluxe Diagnostic: Basic kit, plus Calibration Panel, Printer Module, le Wet Cells tse tharo kaofela.

Karolo ea Nomoro Tlhaloso

• 800270 ……………….. High Flow Wet Cell Kit (2-30 LPM), Basic (115 VAC)
• 800270-2 ……………. Phallo e Phahameng e Metsing ea Cell Kit (2-30 LPM), Basic (230 VAC)
• 800271 ………………….. Standard Flow Wet Cell Kit (20 cc-6 LPM), Basic (115 VAC)
• 800271-2 ……………. Standard Flow Wet Cell Kit (20 cc-6 LPM), Basic (230 VAC)
• 800844-2 ………………. Standard Flow Wet Cell Kit (20 cc-6 LPM), Tlhahlobo (115 VAC)
• 800844-2-230 ……… Standard Flow Wet Cell Kit (20 cc-6 LPM), Diagnostic (230 VAC)
• 800272 ……………….. Low Flow Wet Cell Kit (1 cc-250 cc), Basic (115 VAC)
• 800272-2 ……………. Low Flow Wet Cell Kit (1 cc-250 cc), Basic (115 VAC)
• 800844-1 ………………. Low Flow Wet Cell Kit (1 cc-250 cc), Tlhahlobo (115 VAC)
• 800844-1-230 ………. Phallo e Tlase ea Wet Cell Kit (1 cc-250 cc), Tlhahlobo (230 VAC)
• 800275 ………………….. Deluxe Kit e nang le lisele tse 3 tsa phallo (115 VAC)
• 800275-2 ……………. Deluxe Kit e nang le lisele tse 3 tsa phallo (230 VAC)
• 801804 ………………….. Deluxe Kit e nang le lisele tse 3 tsa phallo, ha e na khatiso (115 VAC)
• 801804-1 ……………. Deluxe Kit e nang le lisele tse 3 tse phallang, ha ho na mochine oa khatiso (230 VAC)
• 800844-4 ……………. Deluxe Diagnostic Kit e nang le lisele tse 3 tsa phallo (115 VAC)
• 800844-4-230 ……… Deluxe Diagnostic Kit e nang le lisele tse 3 tsa phallo (230 VAC)

Lisebelisoa

• Karolo ea Nomoro Ntho/Tlhaloso
• 800274 Printer Module Kit (115 VAC) (e kenyelletsa printa, pampiri le kopano ea cable)
• 800274-230 Printer Module Kit (230 VAC) (e kenyelletsa printa, pampiri le kopano ea cable)
• 700721 ​​Printer feela
• 811-9943-01- R PC Interface Cable feela
• 811-0501-01 Lenaneo Disk Seta feela
• 360-0049-01 Software User Manual feela
• 801841 Deluxe Carry Case bakeng sa lisele tse 3
• 200904 Latex Tubing, 18” (Standard/High Phallo), 1/4” [ID] x 7/16” [OD], likotoana tse 2
• 200914 Latex Tubing, 18 "(Low Flow), 1/8" [ID] x 7/16" [OD], likotoana tse 2
• 811-0507-01- R Adapter ea Matla, Universal Wall w/USB A ho ea ho thapo ea USB B
• 811-9943-01-R Cable, USB A ho USB B, 6' bolelele
• 811-0509-01-R Motlakase oa Matla, Lebota la Bokahohle
• 780-0015-05-R Cable, Smart Cal

Lisebelisoa

• Karolo ea Nomoro Ntho/Tlhaloso
• 850190-1-R Control Base Unit (9-Pin Cable) [CE]
• 800267-1 Phallo e Tlase ea Seboka sa Metsi a Metsi [1–250 cc/m]
• 800266-1 Kopano e Tloaelehileng ea Lisele tsa Metsi a Phallang [20 cc/m–6 LPM]
• 800265-1 Phallo e Phahameng ea Phallo e Phahameng ea Lisele tsa Metsi [2–30 LPM]
• 200789 Storage Tubing (Phallo e Tlase) —3/16” [ID] x 5/16” [OD] x 1 1/2” [bolelele]
• 200666 Storage Tubing (Tsela e Tloaelehileng) —1/4” [ID] x 7/16” [OD] x 2 3/4” [bolelele]
• 200649 Storage Tubing (Phallo e Phahameng) —1/4” [ID] x 7/16” [OD] x 4 1/2” [bolelele]
• 800331 Safety Tape (10 ft)
• 800450 Flow Cell Soap Solution (8 oz.)
• 400667 Soap Dispenser Bottle
• 800402 Tlhōrō e Tloaelehileng
• 700560 Gilibrator-2 Battery Pack
• 400692 Gilibrator Battery Pack
• 850190M Bukana ea Ts'ebetso le Ts'ebeletso

LIEKETSENG TS'OANELO

Litlhaloso Kakaretso

• Kaho ea Base Unit …………………………… E pentiloe pampiri ea tšepe ea aluminium
• Unit Orientation ……………………………………… Base: E tšekaletseng, sebakeng se bataletseng
• Litaolo ……………………………………………………………………………………………………….. “ON” Konopo ea “tima” Konopo ea “Tlosa/RESET”
• Lipontšo
• Hlahisa Lintlha ……………………………………………. Phallo (4-digit) Karolelano (4-digit) Sample# (linomoro tse 2)
• Maemo a Pontšo ……………………………………….. Phallo: 0–9999 Kakaretso: 0–9999 Sample#: 0–99
• Hlahisa Melaetsa ……………………………………. Phoso ea 1 ea Low Bat Wait Phoso ea 2
• Viewing Angle ………………………………………….. 60°

Litlhaloso tsa Ts'ebetso

• Mocheso oa ho sebetsa ………………………………. 5° ho isa ho 35°C (41° ho isa ho 95°F)
• Thempereichara ea Bobolokelo ………………………………….. 0° to 50°C (32° to 122°F)
• Mongobo o sebetsang ……………………………………….. 0–85 %RH, e sa fokotseng
• Mongobo wa Bobolokelo ………………………………………….. 0–100 %RH, e sa fokotseng
• Nepahetse …………………………………………………… Betere ho feta 1% (Wet Cell)

Litlhaloso tsa Motlakase

• Mohloli oa Matla (DC) ………………………………….. Internal Battery Pack
• Mofuta oa Leshala ……………………………………. NiMH e ka nchafatsoang
• Nako ea ho tjhaja Betri ………………………………… Lihora tse 14
• Ho Lebeletsoe Bophelo ba Betri ……………………………………………
• Keletso Voltage ……………………………………………… USB 5.0V
• Kenyeletso ya Hona Jwale ……………………………………………… 500 mA
• Litlhokahalo tsa Khokahano ea Phetiso …………. RS-232, USB Full Speed
• Lihokelo tsa Sehokelo ………………………… USB-B Serial Port (male DB-9) Sensor Block Connection Cable (DB-9 female)

RETS'ELISITSOE TUMELO LITŠOANTŠISO

Sensidyne e boloka setsi sa tšebeletso ea lisebelisoa fekthering ho fana ka bareki ba eona ka bobeli ba tiisetso le tokiso e se nang tiisetso. Sensidyne ha e nke boikarabelo ba tšebeletso e etsoang ke basebetsi ba bang ntle le basebeletsi ba Sensidyne. Ho tsamaisa mokhoa oa ho lokisa, ka kopo ikopanye le Lefapha la Tšebeletso ea Sensidyne esale pele bakeng sa thuso ka bothata bo ke keng ba lokisoa le / kapa bo hlokang ho khutlisetsoa ha sehlahisoa fekthering. Lihlahisoa tsohle tse khutlisitsoeng li hloka nomoro ea Returned Material Authorization (RMA). Basebetsi ba Lefapha la Tshebeletso la Sensidyne ba ka fihlellwa ho:
Sensidyne
1000 112th Circle N, Suite 100
Petersburg, FL 33716 USA
800-451-9444 • 727-530-3602
727-538-0671 [Fax ea Tšebeletso]

Litaelo tsohle tsa tokiso tseo e seng tsa tiisetso li tla ba le tefiso e tlase ea $50 hore na tokiso e lumelletsoe kapa che. Tefiso ena e kenyelletsa ho sebetsana, tsamaiso le litšenyehelo tsa tekheniki bakeng sa ho hlahloba sesebelisoa le ho fana ka khakanyo. Leha ho le joalo, tefiso ea khakanyo e tla hlakoloa haeba tefiso ea ho boela e lumeloa.
Haeba u lakatsa ho beha moeli litšenyehelong tse lumelletsoeng tsa tokiso, bolela palo ea "ho se fete" odara ea hau ea theko. Ka kopo, bonts'a hore na khotheishene ea theko e hlokahala pele ho tumello ea litšenyehelo tsa tokiso, utloisisa hore sena se kenyelletsa litšenyehelo tse eketsehileng le tieho ea ho sebetsana le eona. Leano la ho lokisa la Sensidyne ke ho etsa litokiso tsohle tse hlokahalang ho khutlisetsa sesebelisoa boemong ba sona bo feletseng ba ho sebetsa.
Litokiso li sebetsoa ka mokhoa oa "first in - first out". Odara ea hau e ka potlakisoa haeba o fana ka tumello ea tefiso ea ho potlakisa. Sena se tla beha odara ea hau ka morao ho liodara tse ntseng li sebetsa.
Paka sesebelisoa le lisebelisoa tsa sona (ka ho khetheha liphutheloana tsa tsona tsa pele) 'me u kenye aterese ea hau ea ho khutlisa, taelo ea theko, tlhahisoleseding ea ho romella le ea ho lefella, nomoro ea RMA, tlhaloso ea bothata bo kopane le sesebelisoa sa hau le litaelo leha e le life tse khethehileng. Litheko tsohle li ka fetoha ntle le tsebiso.
Haeba e le lekhetlo la pele u sebetsana le feme ka kotloloho, u tla kopuoa ho lefa esale pele kapa ho fana ka tumello ea ho romelloa ha COD.
Romella sesebelisoa, se lefelletsoe, ho:

Lauper Instruments AG Irisweg 16B
CH-3280 Murten
Mohala +41 26 672 30 50
info@lauper-instruments.ch
www.lauper-instruments.ch

TŠEBELETSO KHETHO

Lefapha la Tšebeletso ea Sensidyne le fana ka mekhoa e fapaneng ea litšebeletso tse tla fokotsa litšitiso tse theko e boima le litšenyehelo tsa tlhokomelo. Likhetho tsena li kenyelletsa koetliso ea pele, thuso ea botekgeniki ea setšeng, le tokiso e felletseng ea lifeme. Sensidyne e thehile mananeo a 'maloa a fanang ka likhetho tse loketseng lits'ebetso le litlhoko tsa hau. Bakeng sa boitsebiso bo eketsehileng, ikopanye le Lefapha la Tšebeletso la Sensidyne linomorong tse latelang: 800-451-9444 • 727-530-3602 • 727-538-0671 [Fax ea Tšebeletso].

Litokomane / Lisebelisoa

LAUPER INSTRUMENTS Gilibrator 2 USB Calibration System [pdf] Bukana ea Mosebelisi Gilibrator 2 USB Calibration System, Gilibrator 2, USB Calibration System, Calibration System

Litšupiso

• Bukana ea Mosebelisi