KMC E LAOLANG TrueFit Airflow Measurement System

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Lebitso la Sehlahiswa: TrueFit Airflow Measurement System
• Moetsi: Litaolo tsa KMC
• Aterese: 19476 Industrial Drive, New Paris, KA 46553
• Ikopanye le: 877-444-5622
• Websebaka: www.kmccontrols.com

Litaelo tsa Tšebeliso ea Sehlahisoa

Example Diagrams

Kopo e Tloaelehileng

Outdoor Air Damper Kopo ea Thuso ea Khatello

Khutlisetsa Air Damper Kopo ea Thuso ea Khatello

Ho kenya likarolo tsa sistimi

Ho kenya Mookameli

• HLOKOMELA: Kenya selaoli ka har'a sebaka sa tšepe bakeng sa tšireletso ea RF le tšireletso ea 'mele.
• HLOKOMELA: Ho kenya selaoli ka likurufu sebakeng se bataletseng, tlatsa mehato ea On a Flat Surface. Kapa ho kenya selaoli holim'a seporo sa 35 mm DIN (joalo ka se kopantsoeng ka har'a sebaka se koalehileng), tlatsa mehato ea On a DIN Rail.

Sebakeng se Sephara

1. Beha molaoli sebakeng se bataletseng e le hore li-terminal blocks li fihle habonolo bakeng sa wiring ka mor'a hore molaoli o kenngoe.
   • HLOKOMELA: Li-terminals tse ntšo ke tsa motlakase. Li-terminals tse tala ke tsa lintho tse kenang le tse hlahisoang. Li-greyterminals ke tsa puisano.
2. Sekoa sekerufu sa #6 sa tšepe (kakaretso e mene) ho pholletsa le sekhutlo se seng le se seng sa molaoli.

Seporong sa DIN

1. Beha seporo sa DIN e le hore li-terminals tse nang le mebala li fumanehe habonolo bakeng sa lithapo ka mor'a hore molaoli o kenngoe.
2. Hula latch ea DIN ho fihlela e tobetsa hang.
3.  Beha molaoli e le hore li-tab tse 'nè tse ka holimo tsa mocha o ka morao li lule holim'a terene ea DIN.
4.  Theola selaoli khahlanong le seporo sa DIN.
5.  Tobetsa ka har'a latch ea DIN ho kenya seporo.
   • HLOKOMELA: Ho tlosa molaoli, hula latch ea DIN ho fihlela e tobetsa hang ebe o phahamisa molaoli ho tloha seporong sa DIN.

Ho kenya Inclinometer

ELA HLOKO: Haeba moea o ka ntle damper e na le moaho o otlolohileng damper blades, o tla hloka pele ho kenya HLO-1050 Linkage Kit moeeng o kantle damper. (Sheba HLO-1050 Linkage Kit Installation Guide.) Ebe u tsoela pele ka tlase.

1. Beha inclinometer sebakeng se rapameng-axis kantle ho moea damper lehare e le hore terata e bapile le likhaba 'me motsu o holim'a setikara sa inclinometer o supe holimo.HLOKOMELA: Haeba yuniti e na le moea o fetang bonngoe damper, beha inclinometer moeeng o khutlang oa axis damplehare. (Leha ho le joalo, haeba yuniti le eona e na le moea o fetang o le mong o khutlang damper, AFMS ha e khone ho kengoa.)
2.  Hokela inclinometer ho damplehare le nang le likurufu tsa tšepe tse peli #8.
3.  Tsamaisa terata hole le dampe le hore e se ke ea tlama damper.
4. Tsamaisa terata ho molaoli.
   • TLHOKOMELISO: Hokela khatholoho e lekaneng (mohlala, ka maqhama a terata) ha ho hlokahala ho thibela inclinometer hore e se hule ka phoso ho d.amper blade nakong ea tlhokomelo ea lisebelisoa.

Ho theha li-Supply Airflow Pickup Tubes

Ho tlameha ho be le li-tubes tse lekaneng tsa phallo ea khatello e tlamehang ho kengoa, bakeng sa boholo ba sebaka sa ho bula, ho fumana boleng bo nepahetseng ba karolelano ea moea. Ho khothaletsoa li-tubes tse ngata (bonyane 2) tse hokahantsoeng ka har'a li-pitot tse tšoanang. Li-tubes tsa phallo ea phallo ea moea li ka kenngoa ka e 'ngoe ea litsela tse tharo:

• On the Supply Air Fan Bell (sebelisa SSS-1112/3/4)
•  On the Supply Air Fan Bell (sebelisa SSS-1115/6/7)
• Ho Supply Air Duct (ho sebelisa SSS-101x).

On the Supply Air Fan Bell (sebelisa SSS-1112/3/4)

1. Beha leoto le ntseng le phahama la li-tubes ntlheng ea tšepe ea fene e le hore lipheletso tsa liphaephe li lebise bohareng ba sefene sa fene.
   • HLOKOMELA: Lintlha tsohle tsa ho lata li tlameha ho ba kahare ho moea bakeng sa karolelano e nepahetseng ea phallo e fapaneng ea khatello. Haeba li-tubes tsa pickup li le telele haholo, sebelisa mohlala o mokgutshwane.
2. Hokela li-tube ho tšepe ea fan u sebelisa li-screw tse peli tse kentsoeng ka masoba a 3/16 ″.
3. Pheta mehato ea 1 ho isa ho ea 2 ho kenya li-tubes tse setseng.

On the Supply Air Fan Bell (sebelisa SSS-1115/6/7)

1. Beha li-tubes tsa pickup e le hore maoto a ntseng a phahama a atolose sekeno sa fene 'me libaka tsohle tsa ho lata li be ka har'a moea.
   • HLOKOMELA: Lintlha tsohle tsa ho lata li tlameha ho ba kahare ho moea bakeng sa karolelano e nepahetseng ea phallo e fapaneng ea khatello. Haeba li-tubes tsa pickup li le telele haholo, sebelisa mohlala o mokgutshwane.
2. Hokela leoto la pele le hloellang ho tšepe ea fan u sebelisa likurufu tse peli tse itšebetsang tse kentsoeng ka masoba a 3/16 ”.
3. Hokela leoto la bobeli le ntseng le phahama lehlakoreng le ka lehlakoreng le leng la tšepe ea fan (kapa strut) u sebelisa li-screws tse peli tse itšebetsang tse kentsoeng ka har'a li-cutouts tse 3/16 ″.
4.  Pheta mehato ea 1 ho isa ho ea 3 ho kenya li-tubes tse setseng.

Ka har'a Supply Air Duct (ho sebelisa SSS-101x)

• • HLOKOMELA: Li-tubes tsa phallo ea khatello li lokela ho kenngoa moeeng o tlhotliloeng sebakeng sa phallo ea laminar, e ka bang li-diameter tse 6 tse otlolohileng ho theosa le kotopo ea moea.

1. Etsa qeto ea hore na tsela eo kotopo e eang teng 'me u kenye li-tubes tsa pickup ho ipapisitse le mongolo oa motsu oa phallo.
   • HLOKOMELA: Li-tubes tsa pickup li tlameha ho kenngoa ka motsu o lebileng moo moea o kenang teng.
2. Seha lesoba la 7/8" ka har'a kotopo ho amohela liphaephe.
3. Hokela li-tubes tsa kotopo ka har'a kotopo ka ho sebelisa likurufu tse peli tsa ho itaipa tse kenngoeng ka masoba a 3/16 ”.
4. Pheta mehato ea 1 ho isa ho ea 3 ho kenya li-tubes tse setseng.

Mount Pickup Tubes bakeng sa Thuso ea Khatello

Ho phahamisa khatello ea khatello ea OADt
Tlatsa mehato ena e eketsehileng hafeela u kenya TRF-5901C-AFMS kapa TRF-5901CE-AFMS bakeng sa kopo ea thuso ea khatello ea OAD. (Sheba Tataiso ea Khetho ea TrueFit AFMS bakeng sa lintlha.)

Ho theha Tube ea Pele ea ho Lata

1. Fumana sebaka sa tube ea pele ea koloi ka ntle ho moea o ka ntle damper, sebakeng seo ho se nang phallo e matla ho tsoa moeeng o kenang ka ntle.
   • HLOKOMELA: Bakeng sa mohlalaample, k'honeng e ka tlas'a sekoaelo se ka ntle sa moea. (Sheba setšoantšo se ka holimo.)
2. Etsa qeto ea tataiso ea moea e le hore u kenye li-tubes tsa pickup e le hore motsu oa FLOW o shebane le tsela ea ho phalla ha moea (bakeng sa tekanyo ea khatello e tsitsitseng).
   • HLOKOMELA: Tabeng ena, mongolo oa motsu oa FLOW o ka supa holimo kapa tlase. Tšoaea SSS-10xx ho tiisetsa ba bang hore mokhoa ona oa perpendicular ehlile ke mokhoa o reriloeng.
3. Seha lesoba la 7/8" (22 mm) ka har'a kotopo ho amohela liphaephe tsa pickup.
4. Hokela li-tubes ho lakane ea tšepe u sebelisa likurufu tse peli tse itšebetsang tse kentsoeng ka masoba a hokellang a 3/16" (5 mm).

Ho theha Tube ea Bobeli ea Pickup

1. Fumana sebaka sa phaephe ea bobeli ea koloi ka phaposing e tsoakiloeng ea moea, sebakeng seo ho se nang moea o fokang.
   • HLOKOMELA: Bakeng sa mohlalaample, hukung ea phaposi ea moea e tsoakiloeng ka hare ho moea o kantle damper.
2. Etsa qeto ea tataiso ea moea e le hore u kenye li-tubes tsa pickup e le hore motsu oa FLOW o shebane le tsela ea ho phalla ha moea (bakeng sa tekanyo ea khatello e tsitsitseng).
   • HLOKOMELA: Tabeng ena, mongolo oa motsu oa FLOW o ka supa holimo kapa tlase. Tšoaea SSS-10xx ho tiisetsa ba bang hore mokhoa ona oa perpendicular ehlile ke mokhoa o reriloeng.
3. Seha lesoba la 7/8" (22 mm) ka har'a kotopo ho amohela liphaephe tsa pickup.
4.  Hokela li-tubes ho lakane ea tšepe u sebelisa likurufu tse peli tse itšebetsang tse kentsoeng ka masoba a hokellang a 3/16" (5 mm).

Ho theha Thuso ea Khatello ea RAD
Tlatsa mehato ena feela ha u kenya TRF-5901C-AFMS kapa TRF-5901CE-AFMS bakeng sa kopo ea thuso ea khatello ea RAD. (Sheba Tataiso ea Khetho ea TrueFit AFMS bakeng sa lintlha.)

Ho theha Tube ea Pele ea Phallo ea Moea

1. Fumana sebaka sa phaephe ea pele ea ho lata haufi le moea o khutlang damper, ho damplehlakoreng la holimo la noka.
2. Etsa qeto ea tataiso ea phallo ea moea e le hore u kenye tube ea li-pickup e le hore motsu oa FLOW o shebane le tataiso ea moea (bakeng sa tekanyo ea khatello e tsitsitseng).
   • HLOKOMELA: Tabeng ena, motsu oa FLOW o ka supa hodimo kapa tlase (ka kotopong e tshekaletseng), kapa ka ho le letshehadi kapa ka ho le letona (mokotong o otlolohileng).
   • HLOKOMELA: Ho khothaletsoa hore ho sebelisoe letšoao ho SSS-10xx ho tiisetsa ba bang hore mokhoa ona oa perpendicular ehlile ke mokhoa o reriloeng.
3.  Seha lesoba la 7/8" (22 mm) ka har'a kotopo ho amohela tšupu.
4. Hokela tšupu holim'a tšepe ea lakane u sebelisa likurufu tse peli tse itšebetsang tse kentsoeng ka masoba a hokellang a 3/16" (5 mm).

Ho kenya Tube ea Bobeli ea Phallo ea Moea

1. Fumana sebaka bakeng sa phaephe ea bobeli ea ho lata haufi le moea o khutlang damper, ho damper's downstream (e leng moya o kopaneng) lehlakore.
2.  Etsa qeto ea tataiso ea phallo ea moea e le hore u kenye tube ea li-pickup e le hore motsu oa FLOW o shebane le tataiso ea moea (bakeng sa tekanyo ea khatello e tsitsitseng).
   • HLOKOMELA: Tabeng ena, motsu oa FLOW o ka supa hodimo kapa tlase (ka kotopong e tshekaletseng), kapa ka ho le letshehadi kapa ka ho le letona (mokotong o otlolohileng).
   • HLOKOMELA: Ho khothaletsoa hore letšoao le sebelisoe ho SSS-10xx ho tiisetsa ba bang hore mokhoa ona oa perpendicular ehlile ke mokhoa o reriloeng.
3. Seha lesoba la 7/8" (22 mm) ka har'a kotopo ho amohela tšupu.
4. Hokela tšupu holim'a tšepe ea lakane u sebelisa likurufu tse peli tse itšebetsang tse kentsoeng ka masoba a hokellang a 3/16" (5 mm).

Ho Mounting the Pressure Transducer(s)

HLOKOMELA: Tlatsa mehato ena hafeela u sebelisa molaoli oa TRF-5901C(E)-AFMS.

HLOKOMELA: Qoba libaka tse nang le ho thothomela ho matla kapa mongobo o feteletseng. Sebaka se kampetsoeng se na le pompo e tloaelehileng ea 1/2-inch 'me e ka kenngoa ka mochini o kopanyang kapa oa mofuta oa cable-gland.

TLHOKOMELO

Se ke oa sebelisa libakeng tse phatlohang kapa tse kotsi, tse nang le likhase tse tukang kapa tse tukang, joalo ka ts'ireletso kapa sesebelisoa sa ho emisa tšohanyetso, kapa ts'ebelisong efe kapa efe moo ho hloleha ha sehlahisoa ho ka bakang kotsi ea motho.

1. Netefatsa hore ho na le sebaka se lekaneng ho potoloha yuniti ho etsa khatello le likhokelo tsa motlakase.
2. Sebelisa likurufu tse keneng ka masoba a k'hasi ho tlamella kopano sebakeng se haufi le mefuta e mengata ea li-tubes tse kenyang khatello. U se ke ua itlama ho feta tekano.
3. Haeba ho ne ho kentsoe li-tubes tsa ho lata phallo ea khatello e eketsehileng moeeng o kantle dampkapa moea o khutlang damper sebaka bakeng sa litekanyo tsa thuso ea khatello, pheta mehato ea 1 le ea 2 bakeng sa transducer ea bobeli ea khatello e haufi le li-tubes tsa pickup.

Ho kenya li-Sensors tsa OAT, RAT, le MAT

STE-1411/12/13/14 Sensor ea Koporo e Bendable
Sebelisa sensor ea koporo e kobehang bakeng sa likarolo tsa moea tse tsoakiloeng tse fihlellehang habonolo le lihoutu tsa moea tse kantle. Haeba karolo ea moea e tsoakiloeng e sa fumanehe habonolo, ho ka sebelisoa mochine o bonolo oa cable. Haeba yuniti e se na hood ea moea e fumanehang habonolo, ho ka sebelisoa probe e thata ea tšepe.

1. Seha lesoba kamoreng e tsoakiloeng ea moea ea yuniti e kholo ho lekana ho fepa probe ea koporo ho tloha ka morao ho sebaka se kampetsoeng.
2. Kenya sesebelisoa sa sensor ka phaposing ea moea e tsoakiloeng, koba tube ea probe ho koahela tsela ea moea, 'me u sireletse ha ho hlokahala.
   • HLOKOMELA: Boloka sebaka se tlase sa lisenthimithara tse tšeletseng ho thibela tšenyo ea lithapo kapa lisensara.
3. Tlamella kampeho ho yuniti ka ho phunya masoba lehlakoreng la yuniti le ho thaepa likurufu ka har'a masoba a keneng.
4. Bakeng sa thapo e lebisang ho molaoli oa AFMS, hokela kotopo ho lesoba la khokahanyo la 1/2” NPT le botlaaseng ba sebaka se kampetsoeng ha ho hlokahala.
5. Bula sekoahelo ka ho hula hanyenyane holim'a latch ka lehlakoreng le letona la sebaka se koaletsoeng ha u ntse u hula sekoahelo.

STE-1415/6/7 Flexible Cable Sensor
Sensor ea flexible cable e ka sebelisoa haeba karolo ea moea e tsoakiloeng e sa fumanehe habonolo.

1. Seha lesoba ka phaposing ea moea e tsoakiloeng ea yuniti e kholo ho lekana ho fepa thapo ea sensor ho tloha ka morao ho sekontiri.
2. Kenya thapo ea sensor ka phaposing ea moea e tsoakiloeng, u khoele thapo ho koahela tsela ea moea, 'me u sireletse ha ho hlokahala.
   • HLOKOMELA: Mohala o feto-fetohang o ka bōptjoa habonolo hore o lekane boholo ba kotopo empa o shebe bonyane ba radius ea
     lisenthimithara tse pedi ho thibela tshenyo ya mehala kapa disensara.
3. Tlamella kampeho ho yuniti ka ho phunya masoba lehlakoreng la yuniti le ho thaepa likurufu ka har'a masoba a keneng.
4. Bakeng sa thapo e lebisang ho molaoli oa AFMS, hokela kotopo ho lesoba la khokahanyo la 1/2” NPT le botlaaseng ba sebaka se kampetsoeng ha ho hlokahala.
5. Bula sekoahelo ka ho hula hanyenyane holim'a latch ka lehlakoreng le letona la sebaka se koaletsoeng ha u ntse u hula sekoahelo.

STE-1404/05 Rigid Steel Probe
Sebelisa mochine o thata oa tšepe bakeng sa kotopo ea moea e khutlang. Ho ka boela ha sebelisoa probe ea tšepe e thata bakeng sa kotopo ea moea e kantle, empa ha feela yuniti e se na sekhurumetso sa moea se kantle se fihlellehang habonolo.

1. Beha sensor sebakeng se otlolohileng sa kotopo, hole le mehloli ea ho futhumatsa, e pholileng kapa ea mongobo.
2. Seha lesoba la 1/4-inch bakeng sa probe lehlakoreng la kotopo hammoho le masoba a manyane bakeng sa likurufu libakeng tse loketseng.
3. Kenya probe 'me u fate kopano ka har'a kotopo u sebelisa li-screws tse kentsoeng ka har'a masoba a kenang ka tlung.
4. Bula sekoahelo sa sensor (STE-1404 feela) ka ho hula hanyenyane holim'a latch ka lehlakoreng le letona la sekoahelo ha u ntse u hula sekoahelo.
5. Bakeng sa thapo e lebisang ho molaoli oa AFMS, hokela kotopo ho lesoba la khokahanyo la 1/2” NPT le botlaaseng ba sebaka se kampetsoeng ha ho hlokahala.

Ho kenya Proportional Actuator

Qetella mehato ena ha feela ho se proportional actuator e seng e kentsoe ho d e nepahetsengamper bakeng sa kopo e hlokahalang:

• Bakeng sa lits'ebetso tse tloaelehileng kapa tsa OAD, beha proportional actuator moeeng o kantle damper (kapa, ho fapana le hoo, moeeng o khutlang damper, haeba e tsamaea hammoho le moea o ka ntle damper).
• Bakeng sa lits'ebetso tsa thuso ea khatello ea RAD, kenya actuator ea proportional moeeng o khutlang damper (kapa, ka tsela e fapaneng, moeeng o kantle dampe tsamaeang mmoho le moya o kgutlang damper). Bakeng sa litaelo tsa hore na u ka beha mofuta oa hau oa mofuta oa MEP-series proportional actuator joang:

1. Khetha sehokelo se loketseng lenaneng, kapa u se batle ho KMC Controls websebaka:
   • MEP-4552
   •  MEP-4952
   •  MEP-7552
2. Fumana tataiso ea ho instola e fumanoang leqepheng la sehlahisoa sa mofuta oo.
3. Latela litaelo tsa ho hlongoa, ho d e loketsengamper bakeng sa kopo e hlokahalang:
   • Bakeng sa lits'ebetso tse tloaelehileng kapa tsa OAD tsa thuso ea khatello, kenya actuator e lekanang moeeng o kantle damper (kapa, ho fapana le hoo, moeeng o khutlang damper, haeba e tsamaea hammoho le moea o ka ntle damper).
   • Bakeng sa lits'ebetso tsa thuso ea khatello ea RAD, kenya actuator ea proportional moeeng o khutlang damper (kapa, ka tsela e fapaneng, moeeng o kantle dampe tsamaeang mmoho le moya o kgutlang damper).

Ho hokahanya Likarolo tsa Sisteme ho Molaoli

Ho hokela li-Tube tsa ho lata Airflow
Bakeng sa TRF-5901C(E)-AFMS
Sebelisa li-tubing tsa polyethylene tse lekaneng bakeng sa likhokahano tsa khatello. Bolelele ba tubing ha boa lokela ho ba nako e telele ho feta kamoo ho hlokahalang. Lokisetsa li-tubing ho fokotsa khatello ea maikutlo holim'a likhokahano le ho thibela kinking.
Ho hokela li-Supply Airflow Pickup Tubes ho Pressure Transducer

1. Ka li-tubing, hokela Port Hs ea li-tubes tsohle tsa li-pickup ka ho bapa le lupu, ebe o hokela ho Phahamiso e phahameng ho transducer ea khatello ea moea.
2. Ka li-tubing, hokela Port Ls ea li-tubes tsohle ka ho bapa le lupu, ebe u hokela ho Low input ho transducer ea khatello ea moea.

Ho hokela li-Tubes tsa ho lata Airflow bakeng sa Lits'ebetso tsa Thuso ea Khatello ea OAD

Tlatsa mehato ena haeba li-tubes tse ling tse peli tsa SSS-1000 li kentsoe sebakeng sa moea o kantle d.amper bakeng sa thuso ea khatello.

1. Bakeng sa peipi e phahamisitsoeng ka ntle ho moea o kantle damper, hokela e 'ngoe ea likou tsa eona, ka li-tubing, ho Kenyelletso e Phahameng ho transducer e sebelisetsoang ho thusa khatello.
   • HLOKOMELA: Ha ho na taba, ts'ebelisong ena, ke boema-kepe ba li-pickup (H kapa L) bo hokahaneng le tlhahiso e Phahameng ea transducer.
2. Bakeng sa peipi e kentsoeng ka hare ho moea o ka ntle damper, hokela e 'ngoe ea likou tsa eona, e nang le li-tubing, ho ea ho Low input ho transducer e sebelisetsoang ho thusa khatello.
   • HLOKOMELA: Ha ho na taba, ts'ebelisong ena, ke boema-kepe ba li-pickup (H kapa L) bo hokahaneng le tlhahiso e tlase ea transducer.
   • HLOKOMELA: Likou tse ling tsa li-pick tubes tse peli li siiloe li sa hokeloa 'me li bulehetse moea.

Ho hokela li-Tube tsa ho lata Airflow bakeng sa Lisebelisoa tsa Thuso ea Khatello ea RAD

Tlatsa mehato ena haeba li-tubes tse ling tse peli tsa SSS-1000 li kentsoe sebakeng sa moea o khutlang d.amper bakeng sa thuso ea khatello.

1. Bakeng sa phupu ea pickup e behiloeng ka lehlakoreng le ka holimo la moea o khutlang damper, hokela e 'ngoe ea likou tsa eona, ka li-tubing, ho Kenyelletso e Phahameng ho transducer e sebelisetsoang ho thusa khatello.
   • HLOKOMELA: Ha ho na taba, ts'ebelisong ena, ke boema-kepe ba li-pickup (H kapa L) bo hokahaneng le tlhahiso e Phahameng ea transducer.
2. Bakeng sa tšupu ea pickup e kentsoeng karolong e ka tlaase ea noka (e leng moea o tsoakiloeng) oa moea o khutlang damper, hokela e 'ngoe ea likou tsa eona, e nang le li-tubing, ho ea ho Low input ho transducer e sebelisetsoang ho thusa khatello.
   • HLOKOMELA: Ha ho na taba, ts'ebelisong ena, ke boema-kepe ba li-pickup (H kapa L) bo hokahaneng le tlhahiso e tlase ea transducer.
   • HLOKOMELA: Likou tse ling tsa li-pick tubes tse peli li siiloe li sa hokeloa 'me li bulehetse moea.

Ho hokela (di) Transducer (di) kgatello ho Molaodi

1. Hokela terata ea mats'oao ho tloha OUT ho transducer ea khatello ea moea ho UI9 ho molaoli.
2. Haeba o kenya transducer ea bobeli bakeng sa (OAD kapa RAD) lits'ebetso tsa thuso ea khatello, hokela terata ea matšoao ho tloha OUT ho transducer ea bobeli ho ea ho UI10 ho molaoli.

Bakeng sa TRF-9311C(E)-AFMS

• HLOKOMELA: Sebelisa 1/4 inch (6.35 mm) FR tubing. Tubing ha ea lokela ho ba telele ho feta 20 feet (6 metres).

1. Tlosa li-plug tse ntšo tsa sekepe ho tloha likoung tsa PRESSURE SENSOR.
2. Ka li-tubing, kopanya Port Hs ea li-tubes tsohle tsa li-pickup ka tsela e ts'oanang le lupu, ebe u hokela ho HIGH port ho molaoli.
3. Ka li-tubing, hokela Port Ls ea li-tubes tsohle tsa pickup ka ho bapa le lupu, ebe u hokela boema-kepe bo LOW ho molaoli.

Ho kopanya Inclinometer

1. Hokela terata e tšehla ea inclinometer ho UI7 ho selaoli.
2. Hokela terata e tala ea inclinometer ho UI8 ho selaoli.
3. Hokela terata e putswa ya mobu ya inclinometer ho GND (pakeng tsa UI7 le UI8) ho selaoli.
4. Hokela terata e khubelu ea inclinometer ho UO8 (bakeng sa TRF-5901C[E]-AFMS) kapa U10 (bakeng sa TRF- 9311C[E]-AFMS).

Ho hokela Sensora e ka Ntle ea Mocheso oa Moea

• ELA HLOKO: Sebelisa lithapo tse sirelelitsoeng tsa 18 ho isa ho tse 24 tsa AWG bakeng sa likhokahano tsohle. Se ke oa beha lithapo tsa sesebelisoa ka har'a kotopo e ts'oanang le likhoele tse sebelisetsoang ho fana ka meroalo e matla joalo ka li-motor.

1. Fepa terata e tla ea ho molaoli oa AFMS ka lesoba le ka tlase.
2. Etsa likhokahano ho lithapo tse peli tsa terata ka li-butt-splices kapa solder. (Ho sebelisa linate tsa terata ha ho khothalletsoe.)
   • HLOKOMELA: Sensor ea terata e 'meli ha e nahanele polarity.
3. Hokela kotopo ka sealant ho thibela moea o kenang.
4. Supa lemati le koetsoe ho fihlela le lokisitsoe ka mokhoa o sireletsehileng.
5. Haeba u batla ho fumana tšireletso e eketsehileng, kenya li-screw tse peli (tse fanoeng) ka har'a li-screw tse kopantsoeng tsa lemati.
6.  Hokela terata ea lets'oao la sensor ho UI4 ho selaoli.
7. Hokela terata e fatše ea sensor ho GND (haufi le UI4) ho selaoli.

Ho hokela Sensora ea Mocheso oa Moea o Khutlisang

• HLOKOMELA: Sebelisa lithapo tse sirelelitsoeng tsa 18 ho isa ho tse 24 tsa AWG bakeng sa likhokahano tsohle. Se ke oa beha lithapo tsa sesebelisoa ka har'a kotopo e ts'oanang le likhoele tse sebelisetsoang ho fana ka meroalo e matla joalo ka li-motor.

1. Fepa terata e tla ea ho molaoli oa AFMS ka lesoba le ka tlase (haeba ho hlokahala).
2.  Etsa likhokahano ho lithapo tse peli tsa terata ka li-butt-splices kapa solder. (Ho sebelisa linate tsa terata ha ho khothalletsoe.)
   • HLOKOMELA: Sensor ea terata e 'meli ha e nahanele polarity.
3. Hokela kotopo ka sealant ho thibela moea o kenang.
4. Supa lemati (haeba ho hlokahala) le koetsoe ho fihlela le hoketsoe ka mokhoa o sireletsehileng.
5. Haeba u batla ho fumana tšireletso e eketsehileng ('me haeba ho hlokahala), kenya li-screw tse peli (tse fanoeng) ka har'a li-screw tse kopantsoeng tsa lemati.
6. Hokela terata ea lets'oao la sensor ho UI5 ho selaoli.
7. Hokela terata e fatše ea sensor ho GND (haufi le UI5) ho selaoli.

Ho hokela Sensor e Kopantsoeng ea Mocheso oa Moea

• HLOKOMELA: Sebelisa lithapo tse sirelelitsoeng tsa 18 ho isa ho tse 24 tsa AWG bakeng sa likhokahano tsohle. Se ke oa beha lithapo tsa sesebelisoa ka har'a kotopo e ts'oanang le likhoele tse sebelisetsoang ho fana ka meroalo e matla joalo ka li-motor.

1. Fepa terata e tla ea ho molaoli oa AFMS ka lesoba le ka tlase.
2. Etsa likhokahano ho lithapo tse peli tsa terata ka li-butt-splices kapa solder. (Ho sebelisa linate tsa terata ha ho khothalletsoe.)
   • HLOKOMELA: Sensor ea terata e 'meli ha e nahanele polarity.
3.  Hokela kotopo ka sealant ho thibela moea o kenang.
4. Supa lemati le koetsoe ho fihlela le lokisitsoe ka mokhoa o sireletsehileng.
   • ELA HLOKO: Haeba u batla ho fumana tšireletso e eketsehileng, kenya li-screw tse peli (tse fanoeng) ka har'a li-screw tse kopantsoeng tsa lemati.
5. Hokela terata ea lets'oao la sensor ho UI6 ho selaoli.
6. Hokela terata e fatše ea sensor ho GND (haufi le UI6) ho selaoli.

Ho hokela Proportional Actuator

Ho Sebelisa Sebapali se Teng sa Proportional
HLOKOMELA:Latela mokhoa o karolong ena ha u kenya AFMS ka har'a yuniti e seng e ntse e e-na le proportional actuator, e laoloang ke molaoli e mong, e behiloeng ka ntle kapa ho khutlela moeeng d.amper.
TLHOKOMELO
Tlosa actuator le molaoli e mong pele u nka mehato e latelang!

1. Hakolla ho actuator e teng mohala oa mats'oao o tsoang tlhahiso ea molaoli e mong.
2. Tlosa ho actuator e teng terata ea fatše e tsoang ho molaoli e mong.
3. Hokela terata ea matšoao (e tsoang ho molaoli e mong) ho ea ho UI3 ho molaoli oa AFMS.
4. Hokela terata ea fatše (e tsoang ho molaoli e mong) ho terminal ea GND (haufi le UI3) ho selaoli sa AFMS.
5.  Matha mohala o mocha oa lets'oao - ho tloha UO7 ho TRF-5901-AFMS, kapa ho tloha UO9 ho TRF-9311-AFMS - ho ea ho terminal ea matšoao ho actuator.
6.  Hokela mohala o tloaelehileng oa mohala oa terata eo e ncha (e sothehileng) ho theminale ea GND (haufi le UO7/UO9) ho selaoli sa AFMS.

Ho sebelisa Sebapali se Secha sa Proportional

Bakeng sa litaelo tsa mokhoa oa ho hokela mohlala oa hau oa actuator ho molaoli:

1. Tobetsa moetsong o loketseng lethathamong, kapa o batle ho Litaolo tsa KMC websebaka:
   • MEP-4552
   • MEP-4952
   • MEP-7552
2. Fumana tataiso ea ho instola e fumanoang leqepheng la sehlahisoa sa mofuta oo.
3. Latela litaelo tsohle mabapi le lithapo ho molaoli tse sebetsang moetsong oa hau oa actuator.
   • ELA HLOKO: Bakeng sa tlhahisoleseding mabapi le hore na ke lisebelisoa life tse kenang le liphetho tseo u ka kenyang terata ho tsona, sheba Litšoantšo tsa Wiring leqepheng la 22 le Input/Objects/Mahokelo.

Ho hokahanya marang-rang

Ho hokela marang-rang a Ethernet
Bakeng sa mefuta ea "E" feela, hokela thapo ea patch ea Ethernet boema-kepeng ba 10/100 ETHERNET.
TLHOKOMELO

• U SE KE UA hokela thapo e etselitsoeng likhokahano tsa Ethernet boema-kepeng ba Sensor ea Kamore! Boema-kepe ba Room Sensor bo matlafatsa NetSensor. Phatlalatso ea voltage ka senya switch kapa router ea Ethernet.
  HLOKOMELA: Mohala oa patch oa Ethernet e lokela ho ba T568B Sehlopha sa 5 kapa ho feta le boholo ba maoto a 328 (limithara tse 100) pakeng tsa lisebelisoa.
  HLOKOMELA: Mefuta ea "E" e sebelisoang ke Ethernet e nang le firmware ea morao-rao e ka hlophisoa ka web ho tsoa maqepheng a tsoang ka har'a molaoli. Balaoli ba na le litekanyetso tse latelang tsa liaterese tsa marang-rang:
  • Aterese ea IP—192.168.1.251
  • Subnet mask—255.255.255.0
  • Gateway-192.168.1.1

Ho hokela marang-rang a MS/TP

1. 1. Bakeng sa TRF-5901C-AFMS kapa TRF-9311C-AFMS, hokela marang-rang a BACnet ho block ea bohlooho ea BACnet MS/TP.
   • HLOKOMELA: Sebelisa thapo e sothehileng ea 18 gauge AWG e nang le bokhoni bo phahameng ba 51 picofarads ka leoto (limithara tse 0.3) bakeng sa lithapo tsohle tsa marang-rang (Belden cable #82760 kapa e lekanang).
     • A. Hokela li-terminals tsa -A ka ho bapa le tse ling kaofela -A li-terminals marangrang.
     • B. Hokela li-terminals tsa +B ka ho bapa le li-terminals tse ling kaofela tsa +B marang-rang.
     • C. Hokela lithebe tsa thapo hammoho sesebelisoa ka seng u sebelisa terata kapa S terminal.
2. Hokela thebe ea cable sebakeng se setle sa lefats'e pheletsong e le 'ngoe feela.
   • HLOKOMELA: Bakeng sa melao-motheo le mekhoa e metle ha o hokela marang-rang a MS/TP, bona Planning BACnet Networks (Application Note AN0404A).
3.  Haeba molaoli a le pheletsong efe kapa efe ea marang-rang a BACnet MS/TP (terata e le 'ngoe feela tlas'a li-terminals), bulela switch ea EOL ho ON.
   • TLHOKOMELISO: Sesebelisoa sa EOL se romelloa ho tsoa fekthering se le OFF.

Matla a ho Hokela

Ho hokahanya Matla ho Molaoli

Ho hokela 24 VAC, Class-2 transformer ho block terminal ea motlakase o motšo ea molaoli:

1. Hokela lehlakore le sa nke lehlakore la transformer ho terminal e tloaelehileng ea molaoli ⊥ .
2. Hokela karolo ea karolo ea AC ea transformer ho terminal ea phase ea molaoli ∼ .
   • ELA HLOKO: Hokela selaoli se le seng feela ho VAC e 'ngoe le e 'ngoe ea 24, transformer ea Sehlopha sa 2 e nang le terata ea koporo ea 12–24 AWG.
   • TLHOKOMELISO: Sebelisa likhoele tse hokelang tse sirelelitsoeng kapa u kenyelle likhoele tsohle ka har'a conduit ho boloka lintlha tse hlahisoang ke RF.
   • ELA HLOKO: Ho sebelisa phepelo ea motlakase ea DC sebakeng sa AC, bona karolo ea "Power (Controller) Connections" ea Tataiso ea Kopo ea KMC Conquest Controller.

Ho kopanya Matla ho Inclinometer

1. Hokela terata e khubelu ea inclinometer ho UO8 bakeng sa TRF-5901-AFMS, kapa UO10 bakeng sa TRF-9311-AFMS.
2. Hokela terata e putsoa ea inclinometer ho GND/SC ho selaoli.

Ho hokela Matla ho Pressure Transducer(s)

• • ELA HLOKO: Tlatsa mehato ena hafeela u sebelisa molaoli oa TRF-5901C(E)-AFMS.
  • ELA HLOKO: Sebelisa bonyane 22 AWG, e sirelelitsoeng, lithapo tse sothehileng bakeng sa likhokahano tsohle. Se ke oa beha lithapo tsa lisebelisoa ka har'a kotopo e ts'oanang le lithapo tse fanang ka meroalo e matla.

TLHOKOMELO
Ha u thehile karolo ea bobeli ea AC transformer kapa ha u kopanya lisebelisoa tse ngata, etsa bonnete ba hore sebaka sa potoloho sa potoloho se tšoana le lisebelisoa tsohle le molaoli.

1. Hokela theminale ea mohato oa molaoli ∼ ho theminale ea transducer ea PWR.
2. Hokela theminale e tloaelehileng ea molaoli ⊥ ho terminal ea COM ho transducer.
3. Haeba ho na le transducer ea bobeli bakeng sa lits'ebetso tsa thuso ea khatello, pheta mehato ea 1 le ea 2 bakeng sa transducer eo.

Ho hokela Matla ho Proportional Actuator
Bakeng sa litaelo tsa mokhoa oa ho kenya motlakase le ho seta ka botlalo mofuta o itseng oa actuator:

1.  Khetha mofuta o nepahetseng lethathamong, kapa o batle ho Litaolo tsa KMC websebaka:
   • MEP-4552
   • MEP-4952
   • MEP-7552
2. Fumana tataiso ea ho instola e fumanoang leqepheng la sehlahisoa sa mofuta oo.
3. Latela litaelo tsohle mabapi le wiring to power le setup se setseng se sebetsang mofuteng oa hau oa actuator.

Matla a Taolo le Boemo ba Puisano

Boemo ba LED ho TRF-5901-AFMS le TRF-9311-AFMS e bonts'a khokahanyo ea matla le puisano ea marang-rang. Litlhaloso tse ka tlase li hlalosa ts'ebetso ea bona nakong ea ts'ebetso e tloaelehileng (bonyane metsotsoana e 5 ho isa ho e 20 ka mor'a ho matlafatsa / ho qala kapa ho qala bocha).

• HLOKOMELA: Haeba bobeli bo botala READY LED le amber COMM LED li lula li TLOHILE, hlahloba matla le likhokahano tsa cable ho molaoli.

Tala RETHABILE LED
Ka mor'a hore motlakase oa motlakase kapa ho qala bocha ho phethe, READY LED e bonesa butle hoo e ka bang hanngoe ka motsotsoana, e bontšang ts'ebetso e tloaelehileng.
Amber (BACnet MS/TP) COMM LED

• Nakong ea ts'ebetso e tloaelehileng, COMM LED e fofa ha molaoli a amohela le ho fetisa letšoao holim'a marang-rang a BACnet MS / TP.
• Ha marang-rang a sa hokahane kapa a buisana ka nepo, COMM LED e benya butle haholo (hoo e ka bang hang ka motsotsoana).

Tala ETHERNET LED

HLOKOMELA: Li-LED tsa boemo ba Ethernet li bonts'a khokahanyo ea marang-rang le lebelo la puisano.

• Ethernet LED e tala e lula e ON ha molaoli a ntse a buisana le marang-rang.
• LED e tala ea Ethernet e TIMA ha molaoli (ea nang le matla) a sa buisane le marang-rang.

Amber ETHERNET LED

• Amber Ethernet LED e benya ha molaoli a ntse a buisana le marang-rang a 100BaseT Ethernet.
• Leseli la amber Ethernet LED le lula le OFF ha molaoli (ea matla) a buisana le marang-rang ka 10 Mbps feela (ho e-na le 100 Mbps).

Taolo ea MS/TP Network Isolation Bulbs
Li-bulbs tse peli tsa ho itšehla thajana li na le mesebetsi e meraro:

• Ho tlosa kopano ea bulb ea (HPO-0055) ho bula potoloho ea MS/TP mme ho arola molaoli ho tloha marang-rang.
• Haeba bulb e le 'ngoe kapa ka bobeli li ON, marang-rang a emisoa ka mokhoa o sa lokelang. Sena se bolela hore matla a fatše a molaoli ha a tšoane le balaoli ba bang ba marang-rang. Haeba sena se etsahala, lokisa wiring.
• Haeba voltage kapa hona joale ho marang-rang ho feta maemo a sireletsehileng, li-bulbs li fofa, li bula potoloho. Haeba sena se etsahala, lokisa bothata 'me u nke sebaka sa kopano ea tleloubu

LINTLHA TSEO:

1. Litlhophiso tsa taolo li tlameha ho hlophisoa qalong ho sebelisoa STE-9XX1.
2. Sheba Khetho ea AFMS, Litaelo tsa Tlhophiso le Likopo bakeng sa lintlha tse ling tsa ho instola.
3. Bona www.kmccontrols.com bakeng sa lisebelisoa le lintlha tse eketsehileng.

LINTLHA TSEO:

1. Litlhophiso tsa taolo li tlameha ho hlophisoa qalong ho sebelisoa STE-9XX1.
2. Sheba Khetho ea AFMS, Litaelo tsa Tlhophiso le Likopo bakeng sa lintlha tse ling tsa ho instola.
3. Bona www.kmccontrols.com bakeng sa lisebelisoa le lintlha tse eketsehileng.

LINTLHA TSEO:

1. Litlhophiso tsa taolo li tlameha ho hlophisoa qalong ho sebelisoa STE-9XX1.
2. Sheba Khetho ea AFMS, Litaelo tsa Tlhophiso le Likopo bakeng sa lintlha tse ling tsa ho instola.
3. Bona www.kmccontrols.com bakeng sa lisebelisoa le lintlha tse eketsehileng.

Lintho tse Kenyellelitsoeng/Sephetho/Mahokelo

TRF-5901C(E)-AFMS
Lintho tse kenang
EA-1-AI	Sensor ea Sebaka (boema-kepeng ba Sensor ea Kamore)
EA-2-AI	Space Setpoint Offset (boema-kepeng)
AI3/UI3	E tlang Damper Signal
AI4/UI4	Outdoor Air Temp
AI5/UI5	Khutlisa Air Temp
AI6/UI6	Motsoako oa Moea o Kopantsoeng
AI7/UI7	Inclinometer V1
AI8/UI8	Inclinometer V2
AI9/UI9	Phepelo ea Khatello ea Moea
AI10/UI10	Transducer e eketsehileng (haeba khatello e thusa hlokahala)
Litholoana
AO6/UO6	0-10 Sephetho sa VDC CFM
AO7/UO7	Outdoor Air Damper
AO8/UO8	Matla a Inclinometer
BO1	Binary Output #1
BO2	Binary Output #2
BO3	Binary Output #3
BO4	Binary Output #4
BO5	Binary Output #5

 

TRF-9311C(E)-AFMS
Lintho tse kenang
EA-1-AI	Sensor ea Sebaka (boema-kepeng ba Sensor ea Kamore)
EA-2-AI	Space Setpoint Offset (ho boema-kepe)
AI3/UI3	E tlang Damper Signal
AI4/UI4	Outdoor Air Temp
AI5/Ui5	Khutlisa Air Temp
AI6/UI6	Motsoako oa Moea o Kopantsoeng
AI7/UI7	Inclinometer V1
AI8/UI8	Inclinometer V2
EA-9-AI	Sensor ea Khatello e fapaneng (e kopantsoe boema-kepe)
Litholoana
AO7/UO7	Analog Output #7
AO8/UO8	0-10 Sephetho sa VDC CFM
AO9/UO9	Outdoor Air Damper
AO10/UO10	Matla a Inclinometer
BO1	Binary Output #1
BO2	Binary Output #2
BO3	Binary Output #3
BO4	Binary Output #4
BO5	Binary Output #5
BO6	Binary Output #6

Ho hlophisa le ho sebetsa

Bakeng sa sesebelisoa se seng le se seng se sebelisetsoang ho lokisa le ho sebelisa AFMS, bona litokomane tse fumanoang leqepheng la sehlahisoa sa sesebelisoa.

Lintlha tse ling

Litaba tse tokomaneng ena ke tsa merero ea tlhahisoleseling feela. Litaba le sehlahisoa seo e se hlalosang li ka fetoha ntle le tsebiso. KMC Controls, Inc. ha e fane ka boemedi kapa ditiisetso mabapi le tokomane ena. Ha ho ketsahalo e tla ba le boikarabelo ba KMC Controls, Inc. bakeng sa tshenyehelo efe kapa efe, ka kotloloho, kapa ka tsietsi, e hlahang kapa e amanang le tshebediso ya tokomane ena. Letšoao la KMC ke letšoao la khoebo le ngolisitsoeng la KMC Controls, Inc. Litokelo tsohle li sirelelitsoe. Sesebelisoa sa KMC Connect Lite™ bakeng sa tlhophiso ea NFC e sirelelitsoe tlasa Nomoro ea Patent ea United States 10,006,654.
Pat. https://www.kmccontrols.com/patents/
TEL: 574.831.5250
FAX: 574.831.5252
EMAIL: info@kmccontrols.com

FAQs

P: Ke lokela ho hokahanya joang li-Tube tsa Airflow Pickup?

• A: Hokela li-tubes tse tsamaisang moea ho latela litaelo tse fanoeng bukeng ea mosebelisi. Netefatsa tepo e nepahetseng le likhokahano tse sireletsehileng ho qoba liphoso tsa tekanyo.

P: Ke marang-rang afe ao nka hokahanyang likarolo tsa sistimi ho ona?

• A: O ka hokela likarolo tsa sistimi ho netweke ea Ethernet kapa netweke ea MS/TP. Latela litataiso tse boletsoeng bakeng sa mofuta o mong le o mong oa marang-rang bakeng sa kopanyo e nepahetseng.

Litokomane / Lisebelisoa

KMC E LAOLANG TrueFit Airflow Measurement System [pdf] Buka ea Taelo AFMS_92501907C, TrueFit Airflow Measurement System, TrueFit, Airflow Measurement System, Measurement System, System

Litšupiso

• Bukana ea Mosebelisi