KMC E LAOLANG KMD-5290E LAN Controller

Litlhaloso:

• Li-network tsa Tier 1 tse nang le lisebelisoa tsa Ethernet
• E ts'ehetsa phihlello ea hole ho netweke ea Tier 1 ka boema-kepe bo ikhethileng ba serial
• Ha e tšehetse marang-rang a Tier 1 a sebelisa likhokahano tsa EIA-485
• Li-network tsa Tier 2 tse nang le likou tse peli tse inehetseng tsa RS-485
• Ho fihla ho balaoli ba 32 KMD-5290E ba ka kopanngoa le marang-rang a le mong ho ea ho lithaka
• Molaoli e mong le e mong o tšehetsa li-node tse fihlang ho 124 ho netweke ka 'ngoe ea Tier 2
• E sebelisa puo ea lenaneo la Control Basic

Tataiso ea ho Kenya le Ts'ebetso

Mount Controller

Ho netefatsa ts'ireletso ea RF le ts'ireletso ea 'mele, kenya selaoli ka har'a moalo oa tšepe. Ho na le mekhoa e 'meli ea ho kenya controller:

Sebakeng se Sephara:

1. 1. Beha molaoli sebakeng se bataletseng e le hore li-terminals tse nang le mebala li fihlelle habonolo bakeng sa lithapo ka mor'a hore molaoli o kenngoe.

HLOKOMELA: Li-terminals tse ntšo ke tsa motlakase. Li-terminals tse tala ke tsa lintho tse kenang le tse hlahisoang. Li-terminals tse bohlooho ke tsa puisano.

1. Hlakola sekoti sa tšepe sa #6 sekhutlong se seng le se seng sa molaoli.

Ka Seporo sa DIN:

1. 1. Beha seporo sa DIN e le hore li-terminals tse nang le mebala li fumanehe habonolo bakeng sa lithapo ka mor'a hore molaoli o kenngoe.
   2. Hula latch ea DIN ho fihlela e tobetsa hang.
   3. Beha molaoli e le hore li-tab tse 'nè tse ka holimo tsa mocha o ka morao li lule holim'a terene ea DIN.
   4. Theola selaoli khahlanong le seporo sa DIN.
   5. Tobetsa ka har'a latch ea DIN ho kenya seporo.

HLOKOMELA: Ho tlosa molaoli, hula latch ea DIN ho fihlela e tobetsa hang ebe o phahamisa molaoli ho tloha seporong sa DIN.

Litheminale, Lisupa le Liphetoho:

• RS-232 Serial Port
• CAN-590x Katoloso ea Module Network Boemo ba LED
• CAN-590x Katoloso ea Mojule, Li-Network Bulbs
• Lisebelisoa tsa Matla a Matla / Boemo ba LED
• SubLAN A EOL Switch, Boemo ba LED
• CAN-590X EIO EOL Switch
• SubLAN B EOL Switch, Boemo ba LED
• CAN-590X IO Terminals Ethernet le IP Main Net (Tier 1) Terminals SubLAN A le SubLAN B (Tier 2) Terminals

Lintlha tsa Wiring:

TERMINAL KHOUTU YA MALA

• Botsho: 24 VAC / VDC Matla
• Bohlooho: RS-485, RS-232, le CAN Communications
• Hlokomela: Bakeng sa ts'ebetso e tšepahalang, sebelisa mohlala oa mohala oa Belden #82760 kapa o lekanang (18 gauge, e sothehileng, e sirelelitsoeng, li-picofarads tse 50 kapa ka tlase) bakeng sa lithapo tsohle tsa marang-rang tsa RS-485. Sheba bukana ea tekheniki ea EIA-485 Network Wire Recommendations (TB190529B) bakeng sa lintlha tse ling.

LBH

P: Ke balaoli ba bakae ba KMD-5290E ba ka kopanngoang le marang-rang a le mong ho ea ho lithaka?

A: Ho fihlela ho balaoli ba 32 KMD-5290E ba ka kopanngoa le marang-rang a le mong ho ea ho lithaka.

P: Ke puo efe ea lenaneo eo molaoli a e sebelisang?

A: Firmware e ho molaoli e sebelisa Control Basic, puo ea mananeo a boemo bo holimo, e bonolo ho ithuta.

P: Na LAN Controller e ka tšehetsa marang-rang a Tier 1 a sebelisa likhokahano tsa EIA-485?

A: Che, KMD-5290E LAN Controller ha e tšehetse marang-rang a Tier 1 a sebelisa likhokahano tsa EIA-485.

LIEKETSENG

Tsena ke litaelo tsa ho kenya le ho sebetsa KMD-5290E LAN Controller. Review thepa ena ka botlalo pele ho kenya kapa ho sebetsa molaoli.

FEELAVIEW

• Selaoli sa LAN se ka sebetsoa maemong a emeng a le mong kapa e le karolo ea sistimi ea dijithale e hokahaneng ka botlalo.
• KMD-5290E e sebelisa marang-rang a Tier 1 a nang le lisebelisoa tsa Ethernet ho buisana le Balaoli ba bang ba LAN. Molaoli o boetse o ts'ehetsa phihlello e hole ea marang-rang a Tier 1 ka koung e ikhethileng ea serial bakeng sa khokahano e tobileng ho PC. Ho fapana le balaoli ba LAN ba KMD, KMD-5290E ha e tšehetse marang-rang a Tier 1 a sebelisa likhokahano tsa EIA-485.
• LAN Controller e tšehetsa marang-rang a Tier 2 a nang le likou tse peli tse inehetseng tsa RS-485. Ho fihlela ho balaoli ba 32 KMD-5290E ba ka kopanngoa le marang-rang a le mong ho ea ho lithaka, e 'ngoe le e' ngoe e tšehetsa li-node tsa 124 ho netweke ka 'ngoe ea Tier 2.
• Firmware ho molaoli e sebelisa Control Basic, puo ea mananeo a boemo bo holimo, e bonolo ho ithuta. Ts'ebetso ena ea mananeo e fumaneha ka har'a software ea KMC Connect le TotalControl™.

THABANG MOLAOLI

Kenya selaoli ka har'a sebaka sa tšepe bakeng sa tšireletso ea RF le tšireletso ea 'mele. Ho kenya selaoli se nang le likurufu sebakeng se bataletseng, tlatsa mehato e ho On a Flat Surface leqepheng la 2. Ho kenya selaoli holim'a seporo sa 35 mm DIN (joalo ka se kenyellelitsoeng ka har'a sebaka sa HCO-1103), tlatsa mehato ho On. a DIN Rail leqepheng la 2.

Sebakeng se Sephara

1. Beha molaoli sebakeng se bataletseng e le hore li-terminals tse nang le mebala li-blocks tsa 1 li fihle habonolo bakeng sa wiring ka mor'a hore molaoli a kenngoe.
   • HLOKOMELA: Li-terminals tse ntšo ke tsa motlakase. Li-terminals tse tala ke tsa lintho tse kenang le tse hlahisoang. Li-terminals tse bohlooho ke tsa puisano.
2. Hlakola sekoti sa tšepe sa #6 sekhutlong se seng le se seng sa 2 sa molaoli.

Seporong sa DIN

1. Beha seporo sa DIN sa 1 e le hore li-terminals tse nang le likhoutu tsa mebala li fihle habonolo bakeng sa likhoele ka mor'a hore molaoli o kenngoe.
2. Hula latch 2 ea DIN ho fihlela e tobetsa hang.
3. Beha molaoli e le hore li-tab tse 'nè tse ka holimo 3 tsa mocha o ka morao li lule holim'a terene ea DIN.
4. Theola selaoli khahlanong le seporo sa DIN.
5. Tobetsa ho latch 4 ea DIN ho kenya seporo.

HLOKOMELA: Ho tlosa molaoli, hula latch ea DIN ho fihlela e tobetsa hang ebe o phahamisa molaoli ho tloha seporong sa DIN.

MAKHOPO

KMD-5290E LAN Controller e ka sebetsa ka mokhoa o ikemetseng kapa e hokahaneng ka marang-rang ho balaoli ba bang. Pele o etsa likhokahano tsa marang-rang, etsa qeto ea hore na ke likhokahano life tse tla sebelisoa le hore na marang-rang a tla hlophisoa joang. LAN Controller e ka 'na ea hokeloa ho balaoli ba bang ka ho sebelisa e le' ngoe kapa tse ling tsa theknoloji e latelang ea marang-rang.

• Khokahano ea LAN ea KMDigital Tier 1 e sebelisa likou tse peli tsa 10/100 Ethernet le cabling e tloaelehileng ea 10/100 CAT 5 Ethernet
• KMDigital Tier 2 marang-rang a sebelisang marang-rang a RS-485 le hardware
• BACnet 8802.3 marang-rang a sebelisang likou tse peli tsa 10/100 Ethernet le maemo a tloaelehileng a 10/100 CAT 5 (kapa ho feta) Ethernet cabling
• BACnet MS/TP e sebelisa RS-485 wiring le hardware
• CAN-590x Katoloso ea Mojule oa EIO. Bakeng sa tlhaiso-leseling e batsi ka letoto la CAN-590X, bona leqephe la lintlha tsa CAN-5900 Series I/O Expansion Modules.

Bakeng sa tlhaiso-leseling e batsi ka likou le likhokahano tsa 'mele, bona Li-terminals, Indicators and Switches leqepheng la 4, Wiring Notes leqepheng la 4 le S.ample Wiring leqepheng la 5.

LITŠOANTŠISO, LITŠOANTŠISO LE LITŠOCHE

TERMINAL KHOUTU YA MALA
Ntsho	24 VAC / VDC Matla
Hlooho	RS-485, RS-232, le CAN Communications

 

LIEKETSENG KHOPO

 

Melao-motheo e tšoanang ea likhoele e sebetsa likarolong tsohle tsa marang-rang tsa RS–485 (KMDigital protocol kapa BACnet).

• Sebelisa thapo e sirelelitsoeng e lumelletsoeng le melaoana e latelang ha o hokela molaoli ho netweke ea Tier 2 (subLAN):
  • Hlokomela: Bakeng sa ts'ebetso e ka tšeptjoang, sebelisa Belden cable model #82760 kapa e lekanang (18 gauge, e sothehileng, e sirelelitsoeng, 50 picofarads kapa ka tlase) bakeng sa lithapo tsohle tsa marang-rang tsa RS-485. Sheba bukana ea tekheniki ea EIA-485 Network Wire Recommendations (TB190529B) bakeng sa lintlha tse ling.
• Hokela li-controller kapa lisebelisoa tse fetang 31 tsa KMC ho netweke e tšoanang ea Tier 1 Ethernet.
• Hokela li-controller tse ka bang 124 tsa KMC ho likhokahanyo tsa Tier 2 A kapa Tier 2 B.
• Hokela terminal ea A ka ho bapa le tse ling kaofela tsa A.
• Hokela B terminal ka ho bapa le tse ling kaofela tsa B terminal.
• Kopanya lithebe tsa thapo hammoho ho molaoli e mong le e mong.
• Hokela lithebe sebakeng sa lefats'e (haeba se le teng) kapa sebaka sa chassis feela pheletsong e 'ngoe ea karolo; theipi morao mobung wa thebe ntlheng enngwe.
• Sebelisa KMD–5575 e pheta-phetoang lipakeng tsa lilaoli tse ling le tse ling tse 32 tsa Tier 2 kapa haeba bolelele ba thapo ea marang-rang a Tier 2 bo feta maoto a 4,000 (≈ 1,220 metres).
• Sebelisa makhetlo a sa feteng a supileng marang-rang.
• Beha sehatelli sa KMD–5567 tseleng ea lithapo moo e tsoang moahong.

SAMPLE KHOPO

Likopo tsa Morero o Akaretsang

 

• HLOKOMELA: Sheba Tataiso ea Kopo ea KMC Conquest™ Controller bakeng sa tlhahisoleseling mabapi le ho sebelisa matla a VDC.
• HLOKOMELA: Bakeng sa khokahanyo e tobileng ea Tier 1 ho PC e nang le serial port ea RS-232, sebelisa KMD-5672 PC ho Controller cable.
• HLOKOMELA: Bakeng sa khokahanyo ea serial ho khomphutha e nang le kou ea USB Type-A feela, sebelisa thapo ea adaptara ea RS-232-to-USB.
• HLOKOMELA: Bokhubelu (Tx), Botala (Gnd), Botsho (Rx).
• HLOKOMELA: Bakeng sa lithapo tsa EIO le MS/TP, bulela konopo ea End Of Line ho lipheletsong ka bobeli tsa marang-rang (terata e le 'ngoe tlas'a theminale ka 'ngoe). Hokela thebe ea cable mobung oa lefatše sebakeng se le seng.
• HLOKOMELA: Bakeng sa tlhahisoleseling e eketsehileng mabapi le likhokahano ho limmojule tsa katoloso, bona Tataiso ea Tlhophiso ea Mojule oa Katoloso ea CAN-5900.
• HLOKOMELA: Hokela molaoli ho netweke ea Ethernet e nang le thapo e tloaelehileng ea patch ea Ethernet.
• HLOKOMELA: Bakeng sa lintlha tse ling mabapi le 4–20 mA tse kentsoeng le tse hlahisoang, bona 4-20 mA Wiring for Controllers Application Guide.
• HLOKOMELA: ExampLe ka holimo e bontša li-terminals tsa SubLAN A kaha li ne li tla hokelloa ka har'a marang-rang ka konopo ea EOL sebakeng sa "OFF".
  Seteishene sa SubLAN B se bonts'oa kamoo se neng se tla ba kateng haeba se hokahane qetellong ea marang-rang ka sesebelisoa sa EOL se behiloeng sebakeng sa "ON".

KHOPOTSO (KHETHO) KEKETSO MOLELE

• HLOKOMELA: Ho fihlela ho li-module tse 'nè tsa katoloso ea lihlopha tsa CAN-5900 li ka kopanngoa ka letoto (li-daisy-chained) ho KMD-5290E LAN Controller bakeng sa lisebelisoa le liphello tse eketsehileng.

1. Hokela theminale e 'ngoe ea EIO (Expansion Input Output) boloko ba A ea molaoli oa letoto la KMD-5290E ho boloko ba bohlooho ba EIO ea module ea katoloso ea letoto la CAN-5900.

• HLOKOMELA: Sheba Tataiso ea Kenyelletso ea Mojule oa Katoloso ea CAN-5901 I/O bakeng sa lintlha.

KHOPALA (KGETHO) ETHERNET NETWORK

1. Ho hokela ho netweke ea Main (KMDigital Tier 1) kapa BACnet, hokela thapo ea patch ea Ethernet boema-kepeng ba 10/100 ETHERNET B.

HLOKOMELA: Mohala oa patch oa Ethernet o lokela ho ba T568B Sehlopha sa 5 kapa ho feta le boholo ba maoto a 328 (limithara tse 100) pakeng tsa lisebelisoa.

KHOKELA (KGETHO)(MA-)

Ho fihla ho tse peli (2) marang-rang a Tier 2 KMD a ka hokeloa ho molaoli oa letoto la KMD-5290E a sebelisa li-terminals tsa SubLAN A le SubLAN B.

Etsa se latelang ho thaela boloko ba C bo bohlooho ba SUB A kapa SUB B ea molaoli oa letoto la KMD-5290E ho netweke ea Tier 2.

1. Hokela -A terminal ho terata e fosahetseng ea thapo.
2. Hokela theminale ea +B ho terata e ntle ea thapo.
3. Hokela terminal ea S (thebe) terata ea fatše ea thapo. Hokela lithebe tsa thapo hammoho sesebelisoa ka seng u sebelisa terata kapa S terminal ho lilaoli tsa KMD.

• HLOKOMELA: Hokela li-controller tse ka sebelisoang ho feta 124 KMD ho e 'ngoe le e 'ngoe ea likou tsa SubLAN.
• HLOKOMELA: Sheba bukana ea tekheniki ea EIA-485 Network Wire Recommendations (TB190529B) bakeng sa lintlha tse ling.

KHOKELA (KGETHO) BACNET MS/TP NETWORK

KMD-5290E e ka hokela ho netweke ea BACnet MS/TP e sebelisa li-terminals tsa SubLAN B.

Ho hokela terata e bohlooho ea SUB B block D ea molaoli oa letoto la KMD-5290E ho netweke ea MS/TP:

1. Hokela -A terminal ho terata e fosahetseng ea thapo.
2. Hokela theminale ea positive +B ho terata e ntle ea thapo.
3. Hokela terminal ea S (thebe) terata ea fatše ea thapo. Hokela lithebe tsa thapo hammoho sesebelisoa ka seng u sebelisa terata kapa S terminal ho lilaoli tsa KMD.
   
   Ikamahanya le PC ka ho toba (KGETHO) 
   Bakeng sa khokahano e tobileng ea Tier 1 ho PC, hokela thapo ea KMD-5672 lipakeng tsa koung ea USB ho PC ho RS-232 serial port terminal block E.
4. Hokela terminal ea TX ho terata e khubelu ea thapo.
5. Hokela terminal ea GND ho terata e tala ea thapo.
6. Hokela terminal ea RX ho terata e ntšo ea thapo.

HLOKOMELA: Haeba ho se na kou ea RS-232 khomphuteng, sebelisa thapo ea adaptara ea RS-232-to-USB Type A (e fumanehang mabenkeleng a tsamaisang lihlahisoa tsa marang-rang).

KHETHA QETELO EA MELA (EOL)

Li-switch tsa EOL li romelloa sebakeng sa OFF. Etsa se latelang ho kenya li-switches ha ho hlokahala.

• Haeba molaoli a le pheletsong efe kapa efe ea marang-rang a EIO (Expansion Input Output) (terata e le 'ngoe feela tlas'a theminale ka 'ngoe), etsa hore EOL e fetole F ho ON.
• Haeba molaoli a le pheletsong efe kapa efe ea marang-rang a SubLAN A (terata e le 'ngoe feela tlas'a theminale ka 'ngoe), etsa hore EOL e fetole G ho ON.
• Haeba molaoli a le pheletsong efe kapa efe ea marang-rang a SubLAN B (terata e le 'ngoe feela tlas'a theminale ka 'ngoe), etsa hore EOL e fetole H ho ON.

HOKANG MATLA

HLOKOMELA: Latela melao eohle ea lehae le likhoutu tsa mehala.

Hokela 24 VAC, Class-2 transformer ho "black power terminal block I" ea molaoli ka ho etsa tse latelang.

1. Hokela lehlakore le sa nke lehlakore la transformer ho terminal e tloaelehileng ea molaoli ⊥ 1 .
2. Hokela karolo ea AC ea karolo ea transformer ho terminal ea phase ea molaoli ~ 2 .

• HLOKOMELA: Hokela molaoli a le mong ho VAC e 'ngoe le e 'ngoe ea 24, transformer ea Sehlopha sa 2 e nang le terata ea koporo ea 12–24 AWG.
• HLOKOMELA: Sebelisa likhoele tse hokelang tse sirelelitsoeng kapa u kenyelle likhoele tsohle ka har'a conduit ho boloka lintlha tse hlahisoang ke RF.
• HLOKOMELA: Ho sebelisa phepelo ea motlakase ea DC sebakeng sa AC, bona karolo ea Mahokelo a Matla (Molaoli) ea Tataiso ea Kopo ea KMC Conquest Controller.

MATLA LE BOEMO BA PUISANO

Maemo a LED a bonts'a khokahanyo ea matla le puisano ea marang-rang. Litlhaloso tse ka tlase li hlalosa ts'ebetso ea bona nakong ea ts'ebetso e tloaelehileng (bonyane metsotsoana e 5 ho isa ho e 20 ka mor'a ho matlafatsa / ho qala kapa ho qala bocha).

HLOKOMELA: Haeba tse tala READY LED le amber COMM LED li lula li TLOHILE, hlahloba matla le likhokahano tsa thapo ho molaoli.

Green READY LED J

Ka mor'a hore motlakase oa motlakase kapa ho qala bocha ho phethe, READY LED e bonesa butle hoo e ka bang hanngoe ka motsotsoana, e bontšang ts'ebetso e tloaelehileng.

EIO COMM LED K

The Expansion Input Output (EIO) boemo ba LED bo bonts'a puisano ea marang-rang ea EIO ka mochine o le mong kapa ho feta oa CAN-590X letoto la katoloso. EIO LED e benya ha molaoli a ntse a buisana le marang-rang a EIO

• LED ea EIO e lula e TLOHILE ha molaoli (ea nang le matla) a sa buisane le marang-rang a EIO. Sheba matla le likhokahano tsa marang-rang tsa EIO.
• HLOKOMELA: Sheba Tataiso ea ho Kenya Mojule oa Katoloso ea CAN-5901 I/O bakeng sa tlhahisoleseling e eketsehileng.

Tala ETHERNET LED L

Li-LED tsa boemo ba Ethernet li bonts'a khokahanyo ea marang-rang le lebelo la puisano.

• LED e tala ea Ethernet e ON ha molaoli a ntse a buisana le marang-rang.
• LED e tala ea Ethernet e TIMA ha molaoli (ea nang le matla) a sa buisane le marang-rang.
• Amber ETHERNET LED M
• Amber Ethernet LED e benya ha molaoli a ntse a buisana le marang-rang a 100BaseT Ethernet.
• Leseli la amber Ethernet LED le lula le OFF ha molaoli (ea matla) a buisana le marang-rang ka 10 Mbps feela (ho e-na le 100 Mbps).
• HLOKOMELA: Haeba li-LED tsa Ethernet tse tala le amber li lula li TIMA, hlahloba likhokahano tsa motlakase le marang-rang.

CAN-590X EIO NETWORK ISOLATION BUULBS

Li-bulbs tse peli tsa EIO tse ikhethileng tsa marang-rang N li sebetsa mesebetsi e meraro:

• Ho tlosa kopano ea bulb (HPO-0055) ho bula potoloho ea EIO le ho arola molaoli ho tloha marang-rang.
• Haeba bulb e le 'ngoe kapa ka bobeli li ON, marang-rang a emisoa ka mokhoa o sa lokelang. Sena se bolela hore matla a fatše a molaoli ha a tšoane le balaoli ba bang ba marang-rang. Haeba sena se etsahala, lokisa wiring. Sheba Marang-rang a 2 a Khokahano (Boikhethelo) leqepheng la 6.
• Haeba li-bulbs li tima, joale potoloho e butsoe ka lebaka la voltage kapa hona joale marang-rang a fetang maemo a sireletsehileng. Haeba sena se etsahala, lokisa bothata 'me u nke sebaka sa kopano ea tleloubu.

TS'ELISO MOLAOLI

• Pele o kenya sesebelisoa ts'ebetsong, se tlameha ho qalisoa le ho rarolloa. Sheba tafole e latelang bakeng sa sesebelisoa sa Litaolo tsa KMC se loketseng haholo bakeng sa ho hlophisa, ho etsa mananeo, le/kapa ho etsa litšoantšo bakeng sa molaoli. Sheba litokomane tsa lisebelisoa kapa litsamaiso tsa Thuso bakeng sa lintlha tse ling.
• HLOKOMELA: KMD-5290E e ka hlophisoa ka ho hokahanya HTML5-e lumellanang web sebatli ho aterese ea IP ea kamehla ea molaoli (192.168.1.251). Sheba Configure ka Web Maqephe a leqepheng la 19 bakeng sa tlhahisoleseding e eketsehileng mabapi le tlhophiso e hahelletsoeng ka hare web maqephe
• * Sehokelo sa mosebelisi se ikhethileng web maqephe a ka tsamaisoa sebakeng se hole web seva, empa eseng ho molaoli.
• **KMD-5290E e ka hlophisoa ka HTML5 e tsamaellanang web ho tsoa maqepheng a tsoang ka har'a molaoli.
• Bakeng sa tlhahisoleseling, sheba ho Configure with Web Maqephe.
• *** Tlhophiso e felletseng le mananeo a KMDigital a tšehetsoa ho qala ka TotalControl™ ver. 4.0.

PHETHISO TIISETSO FILES

Tsela e sebetsang ka ho fetisisa ea ho kopanya KMD-5290E ho netweke e teng ke ho kopitsa litlhophiso tsa tlhophiso ho tsoa ho molaoli ea teng oa Tier 1 marang-rang. Litlhophiso tsa mantlha li ka bolokoa joalo ka phanele file le ho fetisetsoa ho molaoli e mocha ka ho sebelisa sesebelisoa sa software sa "Hardware Configuration Manager" (HCM).

HO HLOMELA MOLAOLI KA HCM

KMC Hardware Configuration Manager (HCM) tshebediso ya software e fumaneha ho KMC Controls websebaka. Litaelo tse felletseng bakeng sa HCM li kenyellelitsoe bukeng ea litaelo tsa Hardware Configuration Manager le sistimi ea thuso e hlokolosi ka har'a HCM. Ho lokisa le Hardware Configuration Manager (HCM) kapa software e 'ngoe, komporo e tlameha ho khona ho fihlella molaoli.

Khokahano e otlolohileng ea PC

Sebaka sa serial sa RS-232 ho molaoli se sebelisetsoa khokahano e tobileng ea Tier 1 ho PC. Khokahano ena e sebelisa thapo ea KMD–5672 PC-to-Controller haeba kou ea RS-232 e le sieo komporong. Sheba Hokela ka ho toba ho PC (Ka boikhethelo).

Lisebelisoa

Pele o qala ho kenya KMD-5290E LAN Controller, fumana lisebelisoa tse latelang.

• Sistimi e rera ka liaterese tsa taolo
• USB ho RS-232 serial adapter cable (bakeng sa khokahano ea serial ea Tier 1 ho PC e se nang boema-kepe ba RS-232)
• Hardware Configuration Manager (software application, e fumaneha bakeng sa ho khoasolla ho tsoa ho KMC Controls Partner Portal ho kmccontrols.com)

Lintho Tse Amanang

• Ho phaella linthong tse fanoeng tokomaneng ena, review le ho ba le lisebelisoa tse latelang tsa litšupiso.
• Tataiso ea Reference Manager ea Hardware
• Tataiso ea ho Kenya Mojule oa Katoloso ea CAN-5900

HO HLAHALA BACK PANEL FILE

Ho theha phanele ea bekapo file, etsa se latelang:

1. Qala HCM, hokela molaoli komporong 'me u thehe likhokahano le molaoli.
2. Ho skrine sa LAN Controller Configuration ho HCM, tobetsa Panel Backup.
3. Batla sebakeng seo ho sona file o tla bolokeha.
4. Kenya lebitso bakeng sa file. HCM e tla eketsa ka bo eona.PNL.
5. Ha e se e loketse, tobetsa Boloka.
6. Ha Etsa Panel File Dialog Specific dia bula, etsa e 'ngoe ea tse latelang
   • Tobetsa E ho boloka faele ea file e ka sebelisoang feela le molaoli oa nomoro ea aterese e tšoanang.
   • Tobetsa Che ho boloka a file e ka sebelisoang le nomoro efe kapa efe e lumellanang ea molaoli.

HCM e tla qala ho boloka lifaele tsa file hang ha E kapa Che e tobetse.

PUSELETSO LE BUKA PANEL FILE

Ho busetsa selaola ho tswa ho phanele ya bekapo file, etsa se latelang:

1. Hokela komporo e tsamaisang HCM ho molaoli ebe o qala HCM.
2. Matla molaoli.
3. Ho skrine sa LAN Controller Configuration ho HCM, tobetsa Panel Restore.
4. Batla sebakeng sa bekapo.PNL file.
5. Khetha ea file ebe o tobetsa Open.
6. Puisanong ea Tiiso, etsa e 'ngoe ea tse latelang.
   • Tobetsa E ho sebelisa tlhophiso ea aterese ea Ethernet ho file .
   • Tobetsa Che ho sebelisa tlhophiso ea aterese ho molaoli.
7. Ha puisano ea HCM e bula, etsa e 'ngoe ea tse latelang.
   1. • Tobetsa E ho hlakola lileibole tsa lintlha, litlhaloso le litlhophiso tsa tlhophiso pele o qala ho khutlisa.
      • Tobetsa Che ho tsoela pele ntle le ho hlakola litlhophiso tse teng.
8. Ha tsosoloso e felile, potoloha matla a molaoli ho sebelisa liphetoho. Mookameli joale a ka hokeloa ho marang-rang 'me tlhophiso e eketsehileng e ka etsoa ho sebelisoa sesebelisoa sa molaoli ka hare. web maqephe kapa TotalControl, KMC Connect, kapa KMC Converge software.

KMDIGITAL NETWORK TS'ELISO

Lethathamo la 2 - Libaka tsa Setupo sa Sebopeho sa HCM
Tlhophiso	Tlhaloso
Aterese	Kenya aterese e fuoeng molaoli oa marang-rang. Linomoro tse sebetsang ke 1–31.
Phanele ea ho qetela	Sheba lebokose lena hafeela molaoli a abetsoe nomoro ea aterese e phahameng ka ho fetisisa tsamaisong. Sena se laola phallo ea tokeneng marang-rang. Last Panel ha e sebetse ho balaoli ba Tier 1 ba hokahaneng ke Ethernet.
SubLAN A (Mokhahlelo oa 2) SubLAN B (Mokhahlelo oa 2) BACnet (MS/TP)	E beha lebelo la khokahano ea boema-kepe ba Tier 2 BACnet eo molaoli oa LAN a hoketsoeng ho eona. Beha sekhahla se seng le se seng sa phetisetso hore se lumellane le sa balaoli ba bang marang-rang ka 'ngoe.
Khomphuta A	Sebelisa sebaka sena ho beha lebelo la puisano haeba PC e hokahane ka kotloloho le boema-kepe bona.

Likenyo tse tafoleng Maemo a Ho Hlophisa Sesepa sa HCM lia hlokahala bakeng sa likhokahano tsa molaoli-to-molaoli ho netweke ea KMC Controls Digital (KMD).

ETHERNET TSELA THABANE

Lethathamo la 3 - Sehlopha sa 1 (LAN) Controller Ethernet Settings
Tlhophiso	Tlhaloso
IP Aterese	E fanoe ke molaoli oa marang-rang. Kenya aterese haufi le aterese ea phanele ea LAN Controller.
MTU	Sebelisa 1400 kapa nomoro e fanoeng ke motsamaisi oa tsamaiso.
Gateway	Sebelisa kamehla (255.255.255.255) ntle le haeba router (gateway) e le pakeng tsa lilaoli tse peli tsa Tier 1. Aterese ea IP ea router e fanoa ke mookameli oa tsamaiso ea marang-rang.
Aterese ea MAC	Aterese ea MAC e ka fumanoa sesebelisoa web leqephe. Liaterese tsa MAC bakeng sa lihlahisoa tsa KMC Controls li qala ka 00-D0-6F.
Seva ea Phatlalatso	Bakeng sa balaoli 1-16, khetha ea Seva ea Phatlalatso lebokose la ho hlahloba feela bakeng sa molaoli eo HCM e hoketsoeng ho eona. Bakeng sa balaoli ba bang kaofela, khetha ea Seva ea Phatlalatso lebokose la ho hlahloba.
Karohano	E beha nako bakeng sa molaetsa oa khaso bakeng sa balaoli ba KMD feela: Ona ha se molaetsa oa khaso oa LAN. Setting ea kamehla ke metsotsoana e 20.
Mask a subnet	Beha aterese ea Subnet Mask ho 255.255.255.0. kapa joalo ka ha ho fanoe ke mookameli oa tsamaiso ea marang-rang.

Tafole ea Ethernet routing ke lethathamo le hokahanyang liaterese tsa marang-rang tsa KMC tse abetsoeng balaoli ba KMD Tier 1 le liaterese tsa IP tse hlokoang ke protocol ea LAN. Haeba molaoli a sa hlophisoa hantle, a ke ke a buisana le balaoli ba bang 'me a ka baka mathata le marang-rang kaofela. Pele o qala ts'ebetso ea ho qala, o tla hloka tlhaiso-leseling e mabapi le molaoli le LAN e khutsufalitsoeng ho Lethathamo la 3.

HLOKOMELA: Litlhophiso tsa Ethernet ha li sebetse ho molaoli ho fihlela motlakase o potoloha.

BACNET TIISETSO

Lethathamo la 4 - Litlhophiso tsa BACnet tsa Tier 1
Tlhophiso	Tlhaloso
Mohlala	Nomoro ea mohlala ea sesebelisoa joalo ka ha e fanoe ke moqapi oa sistimi ea BACnet. Linomoro tsa lits'oants'o lia hlokahala, li tlameha ho ikhetha har'a lisebelisoa tsohle tse fumanehang marang-rang 'me li tloha ho 0 ho isa ho 4,194,303.
Lebitso	Leibole e hlokahalang ea litlhaku tse 16 ea sesebelisoa. Lebitso le tlameha ho ikhetha har'a lisebelisoa tsohle tse fumanehang marang-rang. Sehlopha sa litlhaku se sebelisitsoeng ho Name se felle feela ho litlhaku tse hatisoang.
Sebaka	Boitsebiso bo ikhethileng bo sebelisetsoang ho tsebahatsa karolo ea sesebelisoa
APDU Nako e felile	E supa nako - ka milliseconds - lipakeng tsa phetisetso ea APDU e hlokang tumello eo ho seng kananelo e amohetsoeng. Boleng ba kamehla ke 3000 milliseconds.
Max Monghali	Kenya aterese e phahameng ka ho fetisisa ea MAC eo molaoli a tla leka ho e fumana ha a ntse a khetha sesebelisoa se hloahloa ho netweke ea lehae.
Token Timeout	Kenya nako eo molaoli a lokelang ho e emela ho bona hore na node e hole e arabela kopo kapa e qala ho sebelisa letšoao. Boemo ke 20-100 milliseconds.

Haeba molaoli a lokiselitsoe BACnet mme a hokahane le marang-rang a BACnet, molaoli o tlameha ho hlophisoa ho buisana le marang-rang.

KETSAHALO EA BACNET TSA HO LAOLA MOTHEO

Letlapa la 5 - Mefuta ea Ntho e Tšehetsoeng ea BACnet
Mnemonic	Mofuta oa Ntho
AI	Keletso ea Analog
AO	Ntho ea Analog
BI	Binary Input
BO	Binary Output
AV	Boleng ba Analog
BV	Binary Boleng

Molaoli oa LAN o tšehetsa mefuta ea ntho ea BACnet e thathamisitsoeng ho Lethathamo la 5.

Lenaneo la LAN Controller joalokaha u ne u ka etsa balaoli ba bang ba KMDigital.

Ela hloko lintlha tse latelang ha u hlophisa khokahano ea inthanete ea BACnet:

• Ke lintho tse kenang feela, tse hlahisoang le tse feto-fetohang ka har'a LAN Controller tse hlahang e le lintho tse sesebelisoa ho BACnet internetwork.
• Ntlha e hlophisitsoeng joalo ka ntlha ea dijithale ea KMD e tla hlaha e le ntho ea binary ea BACnet. Lintlha tsa analoge li hlaha e le lintho tsa analoge.
• Ho bonahala e le ntho ho lisebelisoa tsa BACnet kapa setsing sa mosebetsi, lokisa ntlha ea KMD ho KMC Connect kapa TotalControl ka litlhaloso le lebitso.
• Sebelisa BAC-SET, BAC-GET le BAC-RLQ ho Control Basic ho bala le ho ngola lintho tse ling lisebelisoa tse ling tsa BACnet.

KMC Controls e khothalletsa hore litšebeletso tsohle tsa BACnet li be le mekhoa e lekaneng ea ho sebetsana le liphoso ka har'a lenaneo la hau la taolo. A sampLe Control Basic code segment e fanoe ka tlase ho bonts'a ho bala boemo ba Binary Input 8 sesebelisoa sa BACnet se nang le mohlala oa nomoro ea 1.

Example:

• 250 G = BAC-GET ( 1 , BI8 ) : REM BACnet bala
• 260 HO-PHOSO 280: REM Haeba phoso, bala hampe, u se ke ua e sebelisa
• 270 1-VAR16 = G: REM Read e ne e le ntle, sebelisa boleng.
• 280 LETELA 0:00:15: REM Lokolla e le hore mananeo a mang a CB a ka tsamaisa 290 END

Ho kena ho LAN Controller bakeng sa BACnet

Ho fihlella LAN Controller bakeng sa tshebediso le netweke ya BACnet, sebedisa seteishene sa opareitara sa BACnet se kang KMC Connect kapa TotalControl.

Ela hloko tse latelang ha u sebetsa le BACnet le LAN Controller:

• LAN Controller e tla hlaha lenaneng la lisebelisoa, empa e ke ke ea khethoa ho tsoa ho software ea opareitara ea "workstation" ho fetola tlhophiso ea lintho tsa eona.
• Lintlha tse hlophisitsoeng ka har'a KMD-5290E ke tsona feela lintlha tse hlahang marang-rang a BACnet.
• Sebelisa BACnet Bala/Ngola Thepa tlas'a menu ea Sistimi ho etsa ka letsoho view kapa ho fetola thepa.•Balaoli ba KMC BACnet le lisebelisoa tsa batho ba bang ba ka bala le ho ngolla lintho tse ho KMD-5290E ka ho bala le ho ngola kantle ho phanele.

TIISETSO LE WEB MAQEPHE

Pele o kenya selaoli ts'ebetsong, se tlameha ho qalisoa le ho sebetsana le ts'ebeliso ea software ea KMC Hardware Configuration Manager (HCM) e fumanehang ho KMC Controls. websebaka. Litaelo tse felletseng tsa HCM li kenyellelitsoe bukeng ea litaelo tsa Hardware Configuration Manager le sistimi ea lithuso e amehang maemong a hahiloeng ho HCM.

KMD-5290E e ka hlophisoa ka HTML5-e lumellanang web ho tsoa maqepheng a tsoang ka har'a molaoli. Balaoli ba na le litekanyetso tse latelang tsa liaterese tsa marang-rang:

• Aterese ea IP—192.168.1.251
• Subnet mask—255.255.255.0
• Gateway-192.168.1.1

HLOKOMELA: KMD-5290E LAN Controller e ntse e ka hlophisoa ho sebelisoa HCM, KMC Connect kapa software ea TotalControl.

Fesetere ea ho kena

Ho lokisa KMD-5290E e nang le eona e sebeletsoang ka hare web maqephe

1. Hokela molaoli koung ea Ethernet ka ho etsa e 'ngoe ea tse latelang:
   • Hokela ho subnet e amohelang aterese 192.168.1.251.
2. Hokela matla ho molaoli.
3. Bula fensetere e ncha ea sebatli komporong.
4. Ngola aterese ea IP ea kamehla 192.168.1.251.
5. Fensetereng ea ho kena tšimong ea lebitso la mosebelisi, thaepa admin.
6. Ka fensetere ea ho kena sebakeng sa password, thaepa admin.
   • ELA HLOKO: Skrine sa ho kena se tla fumaneha metsotsoana e ka bang 30 ka mor'a hore molaoli a qale hape kapa ha motlakase o kentsoe.
7. Ka mor'a ho kena, fetola li-parameter tsa molaoli kamoo ho hlokahalang
   • Ho fetola aterese ea IP, sheba Fensetere ea Sesebelisoa leqepheng la 20.
   • Ho fetola li-password le ho eketsa basebelisi, sheba Tšireletso leqepheng la 24.
   • Ho fetola liparamente tsa ts'ebeliso, sheba Fensetere ea Firmware (Apdate) leqepheng la 25

HLOKOMELA: Haeba u fetola aterese ea IP, beha molaoli ho subnet e ncha 'me u kene u sebelisa aterese e ncha. Ka mor'a hore aterese e fetoloe 'me e bolokehe, molaoli a ke ke a arabela atereseng ea khale.

Kamora ho kena, nako ea hora e le 'ngoe e qala. Sebapa-nako se khutlela hora e le 'ngoe bakeng sa leha e le efe ea maemo ana

• Leqephe le nchafatsoa kapa le bolokiloe.
• Lenane (ka lehlakoreng le letšehali la skrine) le tobetse ho ea leqepheng le fapaneng.
• Sebali se benyang sa Reset Session Timer (se hlahang metsotso e 'meli pele nako ea ho fela ha nako e fela) sea tobetsoa.

Fesetere ea sesebelisoa

Fesetere ea Sesebelisoa e bonts'a li-setting tsa IP, li-setting tsa KMD, boemo ba CAN Module, le li-setting tsa BACnet. Fesetere ea Sesebelisoa e boetse e hlophisa molaoli oa Local Area Network (LAN).

Setšoantšo sa 1 - Fensetere ea Sesebelisoa

Karolo ea Litlhophiso tsa IP e bonts'a li-parameter tse latelang.

• Aterese ea IP - Aterese ea marang-rang ea kahare kapa ea lekunutu ea molaoli. Sena se fanoa ke motsamaisi oa tsamaiso ea lefapha la IT ea moaho.(Ho fumana aterese e lahlehileng, sheba Ho Fumana Aterese ea IP e sa Tsejoeng leqepheng la 30.)
• MAC — Aterese ea taolo ea phihlello ea mecha ea litaba ea molaoli. Sena se tlameha ho ba se ikhethang le ho tloha ho 0 ho ea ho 127. Nomoro e fanoa ke moetsi 'me e ke ke ea fetoloa.
• Subnet Mask - The Subnet Mask e etsa qeto ea hore na ke karolo efe ea aterese ea IP e sebelisetsoang sesupo sa marang-rang le hore na ke karolo efe e sebelisoang ho khetholla sesebelisoa. Sena se fanoa ke molaoli oa tsamaiso ea lefapha la IT la moaho. Mask e tlameha ho ts'oana le mask bakeng sa router gateway network le lisebelisoa tse ling ho subnet.
• Default Gateway - Aterese ea router gateway network. Sena se fanoa ke mookameli oa tsamaiso ea lefapha la IT ea mohaho. Molaoli le router ea heke e tlameha ho ba karolo ea subnet e tšoanang ea LAN.

Karolo ea Litlhophiso tsa KMD e bonts'a liparamente tse latelang:

• Aterese ea Panel - Aterese ea phanele ea molaoli.
• PC Port Baud - Sekhahla sa baud sa PC Port ho molaoli.
• KMD SubLAN A Baud - Sekhahla sa baud sa boema-kepe ba SubLAN A.
• KMD SubLAN B Baud - Sekhahla sa baud sa boema-kepe ba SubLAN B.

HLOKOMELA: Tsamaea ho leqephe la Tafole ea IP ho lokisa liaterese tsa phanele le li-setting tsa IP.

Karolo ea CAN Modules e bonts'a boemo ba li-module tsa katoloso ea CAN tse hokahantsoeng ka boema-kepe ba EIO.

• Ho matha — Ho bontsha hore netweke e sebetsa.
• Ha e sebetse — E bontsha hore sesebediswa ha se sebetse netwekeng.

Karolo ea Litlhophiso tsa BACnet e sebelisoa ho seta mofuta oa khokahanyo ea BACnet, ho khetholla molaoli e le sesebelisoa sa BACnet le ho seta thepa ea puisano ea BACnet. Liparamente lia fapana ho latela hore na Ethernet kapa MS/TP e khethiloe:
Tobetsa lethathamo la ho theoha haufi le Mode ho khetha MS/TP (e fumaneha ka terminal ea SubLAN B feela), Ethernet(8802.3), kapa Disabled (setting ea kamehla).
Ho boloka liphetoho, tobetsa *Boloka haufi le hukung e kaholimo ho le letona la leqephe. Kamora hore liphetoho lifensetereng li bolokoe, molaoli o tla sebelisa litlhophiso tse ncha mme o tla hloka ho kena atereseng e ncha.

Haeba molaoli a le sieo ho subnet e tšoanang le router gateway network, e ke ke ea sebetsa ka nepo. Lintlha tse latelang lia fumaneha bakeng sa khokahano ea Ethernet 8802.3:

Setšoantšo sa 2 - Litlhophiso tsa BACnet - Ethernet 8802.3

• Lebitso la Sesebediswa - Lebitso le tlamehang ho ikgetha hara disebediswa tsohle tse inthaneteng ya BACnet.
• Tlhaloso - Lintlha tsa boikhethelo tse sa kenyelletsoeng lebitsong la sesebelisoa.
• Sebaka - Boleng ba boikhethelo bo hlalosang sebaka sa 'mele sa molaoli.
• Device Instance - Nomoro e khethollang molaoli mosebetsing oa inthanete. Mohlala oa sesebelisoa o tlameha ho ikhetha mosebetsing oa Marang-rang le ho tloha ho 0–4,194,302. Mohlala oa sesebelisoa o abeloa ke moqapi oa sistimi ea BACnet. Mohlala oa sesebelisoa sa kamehla ho balaoli ba KMDigital ke 124 mme e tlameha ho fetoloa ho nomoro e ikhethileng ho qoba likhohlano le lisebelisoa tse ling.
• Nomoro ea APDU e Leka hape - E bonts'a palo e kholo ea ho leka hape eo APDU (Application Layer Data Unit) e fetisetsoang hape.
• Nako ea Nako ea APDU - E supa nako (ka milliseconds) lipakeng tsa phetisetso ea APDU e hlokang tumello eo ho seng kananelo e fumanoeng bakeng sa eona.

Liparamente li teng bakeng sa khokahanyo ea BACnet MS/TP (e sebetsang ka boema-kepe ba SubLAN B):

Setšoantšo sa 3 – BACnet Fesetere – MS/TP

• Lebitso la Sesebediswa - Lebitso le tlamehang ho ikgetha hara disebediswa tsohle tse inthaneteng ya BACnet.
• Tlhaloso - Lintlha tsa boikhethelo tse sa kenyelletsoeng lebitsong la sesebelisoa.
• Sebaka - Boleng ba boikhethelo bo hlalosang sebaka sa 'mele sa molaoli.
• Device Instance - Nomoro e khethollang molaoli mosebetsing oa inthanete. Mohlala oa sesebelisoa o tlameha ho ba o ikhethang marang-rang le ho tloha ho 0 ho isa ho 4,194,302. Mohlala oa sesebelisoa o fanoa ke moqapi oa sistimi ea BACnet.

Mohlala oa sesebelisoa sa kamehla ho balaoli ba KMDigital ke 124 mme e tlameha ho fetoloa ho nomoro e ikhethileng ho qoba likhohlano le lisebelisoa tse ling. Sebopeho sa sesebelisoa sa kamehla bakeng sa balaoli ba Conquest ke 1 mme se tlameha ho fetoloa ho nomoro e ikhethileng ho qoba likhohlano le lisebelisoa tse ling.

• Nomoro ea APDU e Leka hape - E bonts'a palo e kholo ea ho leka hape eo APDU (Application Layer Data Unit) e fetisetsoang hape.
• Nako ea Nako ea APDU - E supa nako (ka milliseconds) lipakeng tsa phetisetso ea APDU e hlokang tumello eo ho seng kananelo e fumanoeng bakeng sa eona.
• APDU Seg. Nako ea Nako - Thepa ea Segment Timeout e bonts'a nako (ka milliseconds) lipakeng tsa phetisetso ea karolo ea APDU.
• Aterese ea MAC - Aterese ea Taolo ea Phano ea Mecha e abetsoeng molaoli bakeng sa marang-rang a MS/TP.
• Baud Rate - Tobetsa motsu o theohang ho khetha ho tsoa mefuteng e fapaneng ea litlhophiso. Sekhahla sa baud bakeng sa router le lisebelisoa tsohle tse amanang le marang-rang a MS / TP li tlameha ho tšoana.
• Max Master - Beha 127 kapa e seng tlase ho feta aterese e phahameng ka ho fetisisa ea MAC marang-rang.
• Max Info Frames - Palo e kholo ka ho fetisisa ea liforeimi tse tla romelloa ke molaoli pele e lokolla letšoao.

Fesetere ea Tlhophiso ea Letlapa la IP

Fesetere ea IP Table e sebelisetsoa ho view le ho lokisa liaterese tsa phanele le li-setting tsa IP. Tafole e bonts'a liphanele tse ka bang 31.

Setšoantšo sa 4 - Fensetere ea Tlhophiso ea Letlapa la IP

Li-parameter tse fumanehang fensetereng ena ke:

• Aterese ea Panel - Aterese ea phanele e bonts'oa fensetereng.
• MTU (Maximum Transmission Unit) - Pakete e kholo ka ho fetisisa kapa boholo ba foreimi, e boletsoeng ka li-octet (li-byte tse robeli) tse ka romeloang ka pakete kapa marang-rang a thehiloeng ho foreimi.
• Nomoro ea Panel - E bonts'a nomoro ea tatellano ea phanele.
• Aterese ea IP - Aterese ea marang-rang ea kahare kapa ea lekunutu ea molaoli. Sena se fanoa ke motsamaisi oa tsamaiso ea lefapha la IT ea moaho.(Ho fumana aterese e lahlehileng, sheba Ho Fumana Aterese ea IP e sa Tsejoeng leqepheng la 30.)
• Subnet Mask - The Subnet Mask e etsa qeto ea hore na ke karolo efe ea aterese ea IP e sebelisetsoang sesupo sa marang-rang le hore na ke karolo efe e sebelisoang ho khetholla sesebelisoa. Sena se fanoa ke molaoli oa tsamaiso ea lefapha la IT la moaho. Mask e tlameha ho ts'oana le mask bakeng sa router gateway network le lisebelisoa tse ling ho subnet.
• Default Gateway - Aterese ea router gateway network. Sena se fanoa ke mookameli oa tsamaiso ea lefapha la IT ea mohaho. Molaoli le router ea heke e tlameha ho ba karolo ea subnet e tšoanang ea LAN.
• Broadcast Server - Ha e hlahlojoa, e bonts'a hore sesebelisoa ke seva sa phatlalatso.
• Phanele ho Panel Nako(metsotsoana) — E bonts'a nako, ka metsotsoana, lipakeng tsa phetiso ea molaetsa oa seva.

Ho kenya tlhophiso ea Tafole ea IP ea kantle, tobetsa Khetha File ebe u khetha ea file ho tsoa lenaneng la ho theoha.
Ho nchafatsa litaba tse tafoleng, tobetsa Refresh.
Ho boloka tlhophiso ea hajoale ea Tafole ea IP, tobetsa Boloka.
Ho boloka tlhophiso ea Tafole ea IP, tobetsa Save Table ho file ebe u khetha sebaka sa ho file ho bolokeha.

Tshireletso Fesetere

Fesetere ea Tšireletso e beha phihlello ea mosebelisi ho molaoli.

Setšoantšo sa 5 - Fensetere ea Tšireletso

KMD-5290E e hlophisitsoe ka lebitso la mosebelisi le password ea kamehla.

• Lebitso la mosebedisi: admin
• Password: admin

Hlokomela se latelang.

• Nakong ea tlhophiso, li-default tsa admin/admin li lokela ho fetoloa ho matlafatsa ts'ireletso.
• Lethathamo la mabitso a mosebelisi le tlameha ho kenyelletsa bonyane lebitso le le leng le nang le litokelo tsa Motsamaisi.
• Mabitso a basebelisi le li-password ha li na taba.

Selaoli se na le mekhahlelo e mengata ea phihlello ea basebelisi:

• A View Ke basebelisi feela ba ka view maqephe a tlhophiso empa a sa etse liphetoho.
• Opereishene e ka etsa liphetoho tsa tlhophiso empa ha e khone ho fetola litlhophiso tsa ts'ireletso.
• Mookameli a ka etsa liphetoho tsa tlhophiso le ts'ireletso.
• Mosebelisi oa phihlello ea Tloaelo o na le mekhoa e kopaneng ea phihlello joalo ka ha a khethiloe ke Motsamaisi.

Lethathamo la 6 - Maemo a Phihlello ea Tšireletso
	Hlophisa	Tlhahlobo	Tshireletso
Motsamaisi	Hlahisa Fetola	Hlahisa Fetola	Hlahisa Fetola
View Feela	Pontšo	Pontšo
Mokhanni	Hlahisa Fetola	Hlahisa Fetola
Tloaelo	Hlahisa* Fetola*	Hlahisa* Fetola*	Hlahisa* Fetola*

Fensetere ea Firmware (Ntlafatsa).

KMD-5290E firmware e ka nchafatsoa ka ho web sebatli ka mor'a ho khoasolla firmware ea morao-rao ho tsoa ho KMC Controls websebaka.

Setšoantšo sa 6 - Fensetere ea Firmware

Ho khoasolla ho tsoa ho KMC le ho kenya firmware file khomphuteng:

1. Kena ho Litaolo tsa KMC web saete (www.kmccontrols.com) 'me u khoasolle firmware ea morao-rao e zip file ho tsoa leqepheng la sehlahisoa sa molaoli oa KMD.
2. Fumana le ho ntša "Over-The-Network" (eseng "HTO-1104_Kit") EXE file bakeng sa molaoli ea loketseng oa mohlala.
3. Matha faele ea KMD-5290E_OverTheNetwork.exe file.
4. Tobetsa E ho lumella Windows ho kenya lenaneo.
5. Tobetsa OK lebokoseng la puisano la License la Firmware.
6. Tobetsa Unzip ka lebokoseng la puisano la WinZip Self-Extractor ho kenya firmware ho tloha khomphuteng ho ea ho molaoli:
7. Kena ho molaoli oa web leqephe. Sheba Fesetere ea ho Kena leqepheng la 19.
8. Ka fensetere ea Firmware ea molaoli, tobetsa Khetha File.
9. Fumana zip e ncha ea firmware file (e lokela ho ba foldareng e nyane ea C:\ProgramData\KMC Controls\Firmware Upgrade Manager\KMD).
10. Tobetsa Open.
11. Ha u botsa hore na u ka tsoela pele ka download, tobetsa OK. Firmware e ncha e qala ho kenya ka har'a molaoli.
    • ELA HLOKO: Ho hlakola ntlafatso le ho siea lisebelisoa ka firmware ea mantlha e ntse e le teng, tobetsa konopo Hlakola kapa Tlosa.
12. Ka mor'a hore firmware e ncha e kenngoe, u tla botsoa hore na u batla ho itlama ho jarolla. Ho phethela ntlafatso, tobetsa OK.
13. Hore phetoho ea firmware e qale ho sebetsa, molaoli o tla hloka ho qalisoa bocha. Ha u botsoa hore na u batla ho qala sesebelisoa hape, tobetsa OK.

Kamora hore molaoli a qale hape, o tla hloka ho kena hape ho ntšetsa pele tlhophiso efe kapa efe e eketsehileng.

Fesetere ea Thuso

HLOKOMELA: Karolo ena e tla fumaneha bakeng sa phatlalatso ea sechaba ea KMD-5290E.

Ena ke khokahano ho sechaba sa KMC web saete e nang le litokomane le lits'ebetso tse ka khoasoang, joalo ka KMD-5290E LAN Controller Data Sheet, Hardware Configuration Manager Reference Guide, le sesebelisoa sa software sa Hardware Configuration Manager (HCM). Khokahano e sebetsang ea Marang-rang ea hlokahala hore sehokelo se sebetse.

Setšoantšo sa 7 - Fensetere ea Thuso

HLOKOMELA: Bulletins le firmware li fumaneha feela ka mor'a ho kena ho web sebaka.

Ho Fetola Aterese ea Khomphutha

Ho hokahanya k'homphieutha ka ho toba ho molaoli, o tlameha ho beha nakoana aterese ea IP ea k'homphieutha hore e lumellane le aterese ea IP ea molaoli. Aterese ea IP ea komporo e ka fetoloa ka software ea utility kapa ka letsoho.

Fetola Aterese ea IP ea Khomphutha ka Utility

Mokhoa o bonolo ka ho fetisisa bakeng sa basebelisi ba tla fetola aterese ea bona ea IP ka makhetlo a mangata ke ho kenya aterese ea IP e fetolang ts'ebeliso (e kang Simple IP Config e fumanehang ho tloha GitHub). Sheba litaelo tse pakiloeng ka software.

Ho software:

1. Boloka rekoto/setting ea tlhahisoleseling ea aterese ea komporo ea hau e teng!
2. Kenya tse latelang bakeng sa aterese e ncha ea nakoana ea IP ea komporo, Subnet mask, le Gateway:

• IP address — 192.168.1.x (moo x e leng nomoro e pakeng tsa 1 le 250)
• Subnet mask - 255.255.255.0
• Gateway — Tloha o se na letho kapa o sa fetoha (kapa haeba seo se sa sebetse, sebelisa 192.168.1.***, moo linomoro tsa ho qetela li fapaneng le aterese ea IP komporong kapa molaoli)

HLOKOMELA: Ka mor'a hore tlhophiso ea molaoli e phethe, khutlisetsa k'homphieutha ho litlhophiso tsa pele tsa IP.

Fetola Aterese ea IP ea Khomphutha ka Bowena

Windows 10 (Litlhophiso)

1. Tobetsa konopo ea Qala.
2. Ho Start menu, tobetsa Litlhophiso (letšoao la gear).
3. Ho Litlhophiso tsa Windows, tobetsa Network & Internet.
4. Tobetsa Ethernet.
5. Tobetsa Network and Sharing Center.
6. Tobetsa Lihokelo: Ethernet.
7. Tobetsa Properties.
8. Tobetsa Internet Protocol Version 4 (TCP/IPv4).
9. Tobetsa Properties.
   HLOKOMELA: Rekota litlhophiso tse teng tsa puisano ea Thepa!
   HLOKOMELA: Haeba Fumana aterese ea IP e khethiloe ka bo eona, aterese ea IP le Subnet mask ea komporo ha li bontšoe. Li ka bonoa, leha ho le joalo, ka ho tsamaisa sesebelisoa sa ipconfig ho tsoa ho taelo ea taelo. Ho matha ipconfig, ka lebokoseng la Batla, thaepa cmd. Ho Command Prompt, tobetsa Enter. Tlanya ipconfig ka potlako ebe o tobetsa Enter.
10. Khetha Sebelisa aterese e latelang ea IP ebe u kenya tse latelang bakeng sa aterese ea IP, Subnet mask, le Gateway.
    • IP address — 192.168.1.x (moo x e leng nomoro e pakeng tsa 2 le 255)
    • Subnet mask - 255.255.255.0
    • Gateway — E tlohe e se na letho kapa e sa fetoha (kapa, haeba seo se sa sebetse, sebelisa 192.168.1.***, moo linomoro tsa ho qetela li fapaneng le aterese ea IP komporong kapa KMC Commander.
11.  Ha lintlha tsohle li nepahetse, tobetsa OK.
12. Tobetsa OK.
    ELA HLOKO: Liphetoho li lokela ho qala ka mor'a metsotsoana e seng mekae.

Windows 7 (Panele ea Taolo)

1. Tobetsa konopo ea Qala ebe u khetha Control Panel.
2. Ho tsoa ho Control Panel:
   • (Neng viewed by icons) Tobetsa Network and Sharing Center.
   • (Neng viewed by category) Tobetsa Network le Marang-rang ebe joale Network and Sharing Center.
     OR
3. Tobetsa khokahano ea lehae bakeng sa LAN. Ho ipapisitse le komporo le mofuta oa Windows, lebitso le tobileng la khokahano e kanna ea ba Ethernet, Local Area Connection, kapa ntho e tšoanang.
4. Moqoqong oa Khokahano ea Sebaka sa Lehae (kapa tse tšoanang) tsa Boemo, tobetsa Properties.
5. Tobetsa Internet Protocol Version 4 (TCP/IPv4).
6. Tobetsa Properties.
7. 
   ELA HLOKO: Rekota litlhophiso tse teng tsa puisano ea Thepa!
   ELA HLOKO: Haeba Fumana aterese ea IP e khethiloe ka bo eona, aterese ea IP le subnet mask ea komporo ha li bontšoe. Li ka bonoa, leha ho le joalo, ka ho sebelisa ipconfig ho tsoa ho taelo ea taelo. Ho tsamaisa ipconfig, tobetsa konopo ea Qala. Ka lebokoseng la Batla, thaepa cmd. Tobetsa Enter. Ka taelo, thaepa ipconfig. Tobetsa Enter.
8. Bukeng ea Properties, khetha Sebelisa aterese e latelang ea IP ebe u kenya tse latelang bakeng sa aterese ea IP, Subnet mask, le Gateway.
   • IP address — 192.168.1.x (moo x e leng nomoro e pakeng tsa 1 le 250)
   • Subnet mask - 255.255.255.0
   • Gateway — Tloha o se na letho kapa o sa fetoha (kapa, haeba seo se sa sebetse, sebelisa 192.168.1.***, moo linomoro tsa ho qetela li fapaneng le aterese ea IP komporong kapa molaoli).
9. Ha lintlha tsohle li nepahetse, tobetsa OK.
10. Tobetsa ho Koala.

HLOKOMELA: Liphetoho li tlameha ho sebetsa ka botlalo kamora metsotsoana e seng mekae.
HLOKOMELA: Ka mor'a hore tlhophiso ea molaoli e phethe, pheta mokhoa ona ho sebelisa litlhophiso tsa pele tsa IP.

Ho batle phoso

• Sheba marang-rang le likhokahano.
• Qala hape molaoli. Sheba Ho seta Selaoli bocha leqepheng la 33.
• Review Aterese ea IP le lintlha tsa ho kena.
•  Sheba karolo ea Communication Issues—Ethernet ho KMC Conquest Controller Application Guide.

Ho Fumana Aterese ea IP e sa Tsejoeng

Haeba aterese ea marang-rang ea molaoli e lahlehile kapa e sa tsejoe, molaoli o tla arabela atereseng ea kamehla ea IP hoo e ka bang metsotsoana ea pele ea 20 ka mor'a hore matla a sebelisoe.

Ho fumana aterese ea IP e sa tsejoeng:

1. Fetola aterese ea IP hore e tsamaisane le 192.168.1.xxx.
2. Hakolla molaoli ho LAN ebe o hokela molaoli joalo ka ha ho hlalositsoe Fensetereng ea Keno leqepheng la 19.
3. K'homphieutheng, bula fensetere ea sebatli 'me u kenye aterese ea kamehla ea 192.168.1.251.
4. Kopanya molaoli hape mohloling oa matla 'me hang-hang u leke ho hokahana le sebatli. Sebatli se tla arabela ka aterese ea IP ea molaoli le subnet mask.
5. Hang ha aterese e tsejoa, hokela molaoli ho subnet e amehang ea IP bakeng sa ts'ebetso e tloaelehileng kapa tlhophiso ea molaoli.

HLOKOMELA: Aterese ea IP ea molaoli e ka boela ea fumanoa ho sebelisoa Hardware Configuration Manager (HCM), KMC Connect, TotalControl, le KMC Converge ha molaoli a hokahane hantle le marang-rang.

LITŠOANTŠISO TSA LITŠOANTŠISO LE MANTSOE

Hangata li-firewall li kenngoa marang-rang ho thibela sephethephethe se sa lumelloeng kapa lisebelisoa tsa elektronike ho kena marang-rang. Balaoli ba LAN ba buisana ka e 'ngoe ea Li-Ports tse peli tsa Ethernet. Likou tsena li tlameha ho buloa hore puisano e fete ka har'a firewall.

Haeba Molaoli oa LAN a tlameha ho buisana le marang-rang moo firewall e leng teng, mehato e latelang e tlameha ho etsoa.

• LAN Controller e tla hlaha empa e ke ke ea khethoa. Lintho tsa eona ha li fumanehe bakeng sa tlhophiso ho tsoa ho BACstage Ntho menu.
• Lintlha tse hlophisitsoeng ka har'a KMD-5290E ke tsona feela lintlha tse bonahalang ho BACnet.
• Ho BACstage, sebelisa BACnet Bala/Ngola Thepa tlas'a menu ea Sistimi ho BACstage ho ea ka letsoho view kapa fetola thepa.
• Balaoli ba KMC BACnet le lisebelisoa tsa motho oa boraro ba ka bala le ho ngolla lintho tse ho KMD-5290E ka ho bala le ho ngola kantle ho phanele.

Haeba Mookameli oa LAN a lula ka mor'a router ea Network Address Translation (NAT), aterese ea IP bakeng sa molaoli e tlameha ho etelloa pele ke lengolo le tlaase "r" ho menu ea tsamaiso. (Ka mohlalaample, r128.1.1.5.). Ho kenyelletsa lengolo lena la sehlomapele ho tla etsa hore KMC Connect kapa TotalControl e hlokomolohe tafole ea IP le ho jarolla ho tsoa phanele ka boeona.

HLOKOMELA: Mokhoa ona o lumella khokahanyo ho LAN Controller e le 'ngoe feela ka router.

TS'EBETSO

Karolo ena e fana ka litaelo tse akaretsang tsa ts'ebetso bakeng sa KMD-5290E LAN Controller. Ho kenyellelitsoe tlhaloso ea Li-Isolation Bulbs, lipontšo tsa boemo ba LED, likhokahano, le litaelo tsa ho seta selaoli bocha. Ka hloko review tlhahisoleseding ena kamoo e sebetsang kateng mosebetsing o etsoang.

Ho Sebelisa Matla

KMD-5290E LAN Controller e tsamaisoa ka boiketsetso ha mojule oa phepelo ea motlakase o hokahantsoe 'me o kentsoe. Netefatsa likhokahano tsohle tsa kantle li phethiloe pele o sebelisa matla ho molaoli. Haeba phoso ho netweke ea EIA–485 e bontšoa ke lamp haufi le e 'ngoe ea lihokelo tsa EIA–485, tlosa motlakase 'me u rarolle potoloho pele o kenya matla hape ho molaoli. Sheba Li-Isolation bulbs karolong e latelang.

Mabone le Lipontšo

KMD-5290E LAN Controller e na le matšoao a boemo le tlhahlobo ea tlhahlobo. Tsena li hlalositsoe karolong ena.

Li-bulbs tsa ho itšehla thajana

Sebaka se haufi le sehokelo sa marang-rang sa EIO ke kopano e nang le mabone a mabeli a manyane a khalase. Li sebetsa e le lisebelisoa tse sireletsang ho itšehla thajana bakeng sa marang-rang a ho atolosa EIO ka litsela tse latelang.

Setšoantšo sa 8 - Li-Bulbs tsa ho Isolation tsa Marang-rang

When illuminated, they indicate improper network phasing. Improper phasing occurs when the ground potential of the controller is higher than the phase or the ground potential of other controllers on the network.

• Li-bulbs li sireletsa molaoli ho senya ka ho fokotsa letšoao la ho kenya. Haeba voltage kapa hona joale ho feta maemo a sireletsehileng a ts'ebetso, li-bulbs li sebetsa e le li-fuse 'me li bula likhokahano pakeng tsa molaoli le marang-rang. Ketsahalong ena, lokisa bothata 'me u nke sebaka sa kopano ea bulb (HPO-0055).
• Li-bulbs li ka tlosoa likoti tsa tsona e le hore li arole molaoli ho tloha marang-rang a amanang.

Lipontšo tsa LED

Lethathamo la 7 - Lipontšo tsa LED tsa Boemo
LED	Mosebetsi
EIO	LED ena e tala e bontša boemo ba marang-rang a CAN-590x Expansion Module. LED ena ea panya neng kapa neng ha molaoli a fetisa data.
SubLAN A	LED ena ea amber e bonts'a boemo ba marang-rang a SubLAN Tier 2 A RS-485. LED ena ea panya neng kapa neng ha molaoli a fetisa data.
SubLAN B	LED ena ea amber e bontša boemo ba marang-rang a SubLAN Tier 2 B RS-485. LED ena ea panya neng kapa neng ha molaoli a fetisa data.
Ethernet (Botala)	LED e tala ea Ethernet e ON ha molaoli a ntse a buisana le marang-rang. LED e tala ea Ethernet e TIMA ha molaoli (ea matla) a sa buisane le marang-rang.
Ethernet (Amber)	Amber Ethernet LED e benya ha molaoli a ntse a buisana le marang-rang a 100BaseT Ethernet. Leseli la amber Ethernet LED le lula le OFF ha molaoli (ea matla) a buisana le marang-rang ka 10 Mbps feela (ho e-na le 100 Mbps).
Matla	Matla a tala a LED a bontša boemo ba molaoli: Ho panya ho tsitsitseng - Haeba molaoli a sebetsa ka mokhoa o tloaelehileng, LED e panya ka lebelo le tsitsitseng. Lefifi/Ha le Late - Haeba LED e sa bonesoa, e ka 'na ea bontša hore molaoli o notletsoe kapa ha a na matla. U ka leka ho qala bocha kapa ho seta selaoli bocha. Panya e Phethahalang kapa e Phetang - Haeba LED e panya, empa eseng ka lebelo le tsitsitseng, molaoli o bontša hore ho na le bothata. Ikopanye le KMC Controls bakeng sa thuso.

Molaoli oa LAN o sebelisa li-LED ho bontša boemo ba molaoli le marang-rang a fapaneng a amanang le molaoli. Tafole e latelang e thathamisa li-LED le mesebetsi ea tsona.

TSAMAISO NAKO

Lilaoli tsa KMD LAN li na le lioache tsa nako ea nnete. Hang ha oache e se e behiloe ka KMC Connect kapa TotalControl, molaoli o boloka nako e nepahetseng esita le nakong ea tahlehelo ea matla. Marang-rang a KMDigital a sebelisa molaoli oa Tier 1 (LAN) ea nang le aterese e tlaase ka ho fetisisa ea nang le nako ea sebele e le mohlokomeli oa nako ea tsamaiso.

RETS'ELISITSOE MOLAOLI

Haeba molaoli a bonahala a notlela kapa a emisa ho sebetsa, o tlameha ho seta botjha boemong ba kamehla ba feme. Ka mor'a hore molaoli o hlophisitsoe bocha, o tlameha ho kenya phanele efe kapa efe e teng hape files ho khutlisetsa ts'ebetso e tloaelehileng. Sheba Ho Hlophisa Molaoli ka HCM leqepheng la 12 bakeng sa lintlha tse ling.

Ho seta bocha KMD-5290E LAN Controller:

1. Tlosa motlakase ho molaoli ka ho hula motlakase.
2. Tlosa li-block tsa RS-485 tsa li-terminal tse tharo bakeng sa likou tsohle tse hokahaneng tsa RS-485. Hape, tlosa lithapo tsa Ethernet, lithapo tsa modem, le likhokahano life kapa life tsa PC.
3. Hlakola lithapo tsohle tsa ho kenya le tse tsoang.
4. Tlosa nyeoe ho molaoli.
5. Tobetsa 'me u tšoare konopo ea Reset O ka lehlakoreng le ka tlaase le letšehali la boto ea potoloho ha u ntse u tsosolosa matla ho LAN Controller.
6. Tsoela pele ho tšoara konopo ea ho seta bocha ho fihlela li-LED tsa READY, SUB A le SUB B li khantša.
   • TLHOKOMELO
   • U se ke ua tlosa matla nakong ea ts'ebetso ea ho tsosolosa. Tšenyo e ka hlaha ho boto haeba sena se etsahala.
7. Lokolla Konopo ea Reset 'me u lumelle molaoli hore a tsoele pele ho matlafatsa (ho panya ha Matla LED e tsitsitseng).
8. Tlosa matla ho molaoli.
9. Khutlisetsa lithapo tsohle le li-terminal blocks maemong a tsona a nepahetseng.
10. Kenya matla hape ho LAN Controller 'me u e lumelle hore e khutlele boemong bo tloaelehileng ba ts'ebetso (e bonts'itsoeng ke ho panya ha Matla a LED).
11. Hokela nyeoe hape ho molaoli.
12. Haeba sena e le ts'ebetso e ncha, molaoli o tlameha ho hlophisoa pele o ka kenngoa ts'ebetsong. Sheba ho Configure Controller leqepheng la 12 bakeng sa litaelo.
13. Haeba u seta selaoli bocha empa u sa se nkele sebaka, sebelisa lenaneo la HCM ho kenya phanele hape files.
14.  Matla a ho potoloha ho molaoli ho theha li-parameter tse ncha tse lokiselitsoeng.

BOHLOKOA TSEBISO

©2023, KMC Controls, Inc. TotalControl ke letshwao la kgwebo la KMC Controls, Inc. Boitsebiso ba patent ho https://www.kmccontrols.com/patents/.
Litokelo tsohle li sirelelitsoe. Ha ho karolo ea khatiso ena e ka hlahisoang bocha, ea fetisoa, ea ngoloa, ea bolokoa tsamaisong ea ho khutlisa, kapa ea fetoleloa puong efe kapa efe ka mokhoa ofe kapa ofe ntle le tumello e ngotsoeng ea KMC Controls, Inc.

TLHOKOMELO

Litaba tse bukeng ena ke tsa merero ea tlhahisoleseling feela. Litaba le sehlahisoa seo e se hlalosang li ka fetoha ntle le tsebiso. KMC Controls, Inc. ha e etse boemedi kapa ditiisetso mabapi le bukana ena. Ha ho ketsahalo e tla ba le boikarabelo ba KMC Controls, Inc. bakeng sa tshenyehelo efe kapa efe, e tobileng kapa e iketsahalletseng, e hlahang ka lebaka la kapa e amanang le tshebediso ya bukana ena.

TS'ESO

Lisebelisoa tse ling tsa ho kenya, ho hlophisa, ts'ebeliso, ts'ebetso, mananeo, ntlafatso, le tse ling tse ngata li fumaneha ho web at www.kmccontrols.com. Kena ho bona tsohle tse fumanehang files.

© 2023 KMC Controls, Inc. Litlhaloso le moralo li ka fetoha ntle le tsebiso

 

Litokomane / Lisebelisoa

KMC E LAOLANG KMD-5290E LAN Controller [pdf] Tlhophiso Tataiso KMD-5290E LAN Controller, KMD-5290E, LAN Controller, Controller

Litšupiso

• Bukana ea Mosebelisi