E088
Buka ea Mosebelisi
Phetolelo ea 1.0
E088 Edge Box
Boithorollo
Likahare tsa bukana ena ke thepa ea bohlale ea Khampani, 'me tokelo ea molao ke ea Khampani. Beng ba likarolo tsohle tsa sehlahisoa sena, ho kenyeletsoa lisebelisoa le software, li matsohong a Khampani. Ntle le tumello e ngotsoeng ea Khampani, bukana ena le litaba tsa eona li ke ke tsa etsisoa, tsa kopitsoa, tsa ntšoa kapa tsa fetoleloa ka lipuo tse ling ka mokhoa ofe kapa ofe. Re hlophisitse bukana ena ka hloko ka maikutlo a ho ba le boikarabello ba basebelisi, empa ha re tiise hore likahare tsa buka ena li nepahetse ka botlalo. Bukana ena ke tokomane feela ea setegeniki, e se nang maikutlo kapa boikemelo ba litaba tsa mokha oa boraro, 'me ha e na ho hlaka ho itseng kutloisisong ea mosebedisi e bakoang ke liphoso tsa mongolo. Haeba ho ka ba le tahlehelo ea tlhahisoleseling e tobileng kapa e sa tobang kapa ho felisoa ha khoebo ho bakoang ke bukana ena kapa tlhahisoleseling eohle mabapi le sehlahisoa se boletsoeng bukeng ena, Khampani le basebetsi ba eona ha ba na ho jara boikarabelo leha e le bofe.
Kaha lihlahisoa tsa rona li lula li ntlafatsoa le ho nchafatsoa, Khampani e na le tokelo ea ho fetola litaba tsa bukana ena ntle le tsebiso pele.
Polelo ea litokelo
Matšoao a khoebo a boletsoeng bukeng ena ke a lik'hamphani tsa bona tse ngolisitsoeng ka molao.
Mabitso a lihlahisoa a kenyellelitsoeng bukeng ena ke a sepheo sa boitsebahatso feela, 'me beng ba ona ke ba bahlahisi kapa beng ba mabitso a bona.
Khaolo ea 1 Kakaretso
1.1 Lenane la ho paka
Rea leboha ka ho khetha lihlahisoa tsa rona.
Ka kopo, netefatsa bonnete ba sephutheloana sa "motherboard" seo u se rekileng. Haeba ho na le tšenyo ea liphutheloana kapa leha e le efe e khuts'oanetage ea lisebelisoa, ka kopo ikopanye le morekisi oa hau kapele kamoo ho ka khonehang.
★ Mochini X1
★ Manual X1 (boikhethelo)
Litlhaloso tsa lisebelisoa tse tsamaeang ka holimo li fanoe bakeng sa litšupiso feela, litlhaloso tsa 'nete li itšetlehile ka sehlahisoa sa sebele,' me Khampani e na le tokelo ea ho e fetola.
1.2 Litlhaloso tsa motherboard
| processor | - Rockchip RK 3588 |
| GPU | - Grafiken e kopaneng |
| Mohopolo | - Onboard LPDDR4/4X chip, kanale e habeli, 4GB/8GB ea boikhethelo |
| Polokelo | - Chip ea EMMC ea Onboard, 32GB/64GB ea boikhethelo – 1 * M.2 2280, e tšehetsa NVME SSD (le AI Accelerator Card multiplex interface) - 1 * Karete ea TF, matla a polokelo a atolositsoeng |
| Pontšo | – 1 * HDMI Mofuta oa A, 1* DP |
| Audio | - 1 * 3.5 mm Line out (e nang le maeke), standard ea Apple |
| Ethernet | – 2 * RJ45, 10/100/1000Mbps |
| Marang-rang a se nang mohala | - Ka holim'a WIFI+BT (AW_NM372SM/AW_CM256SM boikhethelo) – 1 * M.2 extensible 4G (QUECTEL EM05-CE)/5G (QUECTEL RM500Q) - 1 * Zigbee (sehokelo sa boikhethelo, se bolokiloeng) |
| AI Accelerator Card | - Ka sekhahla sa hash sa 6Tops - 1 * M.2 2280, karete e accelerator ea Cambricon AI MLU220, le sekhahla sa hash sa 8Tops |
| TPM/TCM | - Mojule oa TCM o hahiloeng kahare (Z32H330TC); - Pini e hahiloeng ka har'a USB2.0 (mojule ea encryption e atolositsoeng) |
| USB | – 1 * USB3.0+1 * USB2.0 (morao-rao IO), 2 * USB2.0 Front-end IO), 2 * JUSB2.0 phini |
| COM | – 1 * 10pin PHOENIX terminal (1* RS232, 1* RS485), - 1 * Pini ea JCOM (9pin, e hokela sehokelo sa DB9, RS232/485 ka boikhethelo, le ts'ebetso e felletseng) - 1 (4pin, RS232 / TTL, 'me e hokela module ea 4G bakeng sa marang-rang a ikemetseng a ikemetseng) |
| GPIO | - 1 * 10pin PHOENIX terminal (kenyeletso ea likanale tse 'ne le tlhahiso ea likanale tse nne), 3.3V |
| Sehokelo sa katoloso | – 1 * SIM slot, 1 * J_POWER_ON, 1 * J_LED |
| Buzzer | - 1 * buzzer, alamo le tlhahlobo ea liphoso |
| Seta konopo hape | – 1 * Hlakola switch switch |
| Konopo ea matla | – 1 * power_button |
| Ho kenya matla | – DC 12V 4pin aviation polaka |
| Ka kakaretso litekanyo | - 148mm x 108mm x 44.3mm |
| Lisebelisoa tsa mochini | - Aluminium alloy + poleiti ea tšepe |
| Ntja e Lebelelang | – Tšehetso |
| Mokhoa oa tšebetso | - Android12, Debian 11 |
| Bobolokelo (bo-ra-la-na) /horecheng ya ho sebetsa | – -20 ~ 70°C/0 ~ 50°C |
| Tlhokahalo ea mongobo | - 10% RH-90% RH ha ho condensation |
1.3 Sets'oants'o sa Ponahalo
 |
 |
Hlokomela: Setšoantšo sena ke sa litšupiso feela, ka kopo, sebelisa mofuta.
Ka kopo sheba karolo ea "Interface Function Description" bakeng sa li-jumpers kapa li-sockets tse bontšitsoeng setšoantšong se ka holimo.
1.4 Tlhaloso ea Mosebetsi oa Sehokelo (Ka kopo, sheba "Sets'oants'o sa Ponahalo" ho bala karolo ena):
- DC_IN: Sesebelisoa sa ho kenya motlakase sa DC.
- HLAHALA: Konopo ea ho tsosolosa.
- MATLA ON: Konopo ea matla.
- SIM: Sekotjana sa SIM.
- TF: TF slot.
- HDMI: Sehokelo sa ponts'o ea multimedia ea HD.
- DP: Sebopeho sa pontšo ea DP.
- USB3.0: koung ea khokahano ea USB 3.0 (e lumellana le lisebelisoa tsa USB 2.0).
- USB2.0: koung ea khokahano ea USB 2.0 (e lumellana le lisebelisoa tsa USB 1.1).
- COM: Boema-kepe ba serial.
- LAN1/2: RJ45 Ethernet interface.
- LINE OUT (sehlahisoa sa molumo): Jack socket bakeng sa ho hokahanya lisebelisoa tsa audio tsa kantle.
- LED: Leseli la 1 DC le bontšang matla, le khubelu ha le buletsoe. Leseli la 1 4G/5G, botala bo benyang nakong ea ts'ebetso.
Leseli la 1 WIFI, le benyang bofubelu nakong ea ts'ebetso. 1 Zigbee indicator leseli, botala bo benyang nakong ea ts'ebetso. - Li-antennas: 4G, WIFI, Zigbee, le li-antenna tsa 5G.
- GPIO: 3 GPI + 3 GPO (li-terminals tsa PHOENIX).
- COM: 1 RS232 + 1 RS485 (li-terminals tsa PHOENIX).
1.5 Setšoantšo sa Kakaretso sa Dimension of Motherboard
 |
 (Sets'oants'o sena ke sa litšupiso feela, ka kopo, sebelisa ka mofuta) |
1.6 Sebopeho sa board sa bo-mme
 |
 |
Khaolo ea 2 Ho kenya le ho hlophisoa ha li-jumpers & li-connectors
2.1 Seta tlhaloso ea jumper ka 'ngoe
Sehokelo sa 2-pin: Ho kenya sekoahelo sa jumper ka har'a lithakhisa tse peli ho tla koala (khutšoane) khokahano. Ho tlosa jumper cap kapa ho e kenya ka har'a lithapo tse ling (tse boloketsoeng katoloso ea nako e tlang) ho tla bula khokahano.
Sehokelo sa 3-pin: Sekoahelo sa jumper se ka kenngoa ka har'a likhoele 1-2 kapa 2-3 ho koala (khutšoane) khokahano.
U ka tseba joang sebaka sa pele sa pini sa jumper?
- Ka kopo, hlahloba lebokose la li-motherboard ka hloko. Pini efe kapa efe e tšoailoeng ka "1" kapa ka mola o mosoeu o mosoeu ke sebaka sa pele sa phini.
- Hlahloba lisebelisoa tsa solder karolong e ka morao. Hangata, pente e bōpehileng joaloka lisekoere ke phini ea pele.
2.2 Ho seta jumper
Seta setaele sa ho qhomela sa JCOM4_SEL1
| Pin | Tlhaloso |
| 1 | 12V |
| 2 | VCC |
| 3 | 3.3V |
Seta setaele sa ho qhomela sa JCOM1_SEL1
| Pin | Tlhaloso |
| 1 | 12V |
| 2 | VCC |
| 3 | 5V |
| 4 | VCC |
| 5 | RI |
Seta setaele sa ho qhomela sa JCOM1_SEL1
| Pin | Tlhaloso |
| 1 | 12V |
| 2 | VCC |
| 3 | 5V |
2.3 JGPIO1 PHOENIX terminal
| Pin | Tlhaloso ea phini |
| 1 | 3.3V |
| 2 | GPI_0 |
| 3 | GPO_0 |
| 4 | GPI_1 |
| 5 | GPO_1 |
| 6 | GPI_2 |
| 7 | GPO_2 |
| 8 | GPI_3 |
| 9 | GPO_3 |
| 10 | GND |
Hlokomela: Pini e ka ho le letona ho terminal ea mochini oa PHOENIX ke PIN1.
2.4 JCOM2_3 PHOENIX terminal
| Pin | Tlhaloso ea phini |
| 1 | VCC (5V/12V) |
| 2 | TX (RS232) |
| 3 | RX (RS232) |
| 4 | GND |
| 5 | NC |
| 6 | VCC (5V/12) |
| 7 | D+ (RS485 A |
| 8 | D- (RS485 B) |
| 9 | GND |
| 10 | NC |
Hlokomela: Pini e ka ho le letona ho terminal ea mochini oa PHOENIX ke PIN1.
2.5 JCOM4 segokanyimmediamentsi sa sebolokigolo
| Pin | Tlhaloso ea pin |
| 1 | VCC |
| 2 | TX |
| 3 | RX |
| 4 | GND |
2.6 MICE1 pin interface
| Pin | Tlhaloso ea pin |
| 1 | RX |
| 2 | GND |
| 3 | TX |
2.7 USB 2/3 pin interface
| Pin | Tlhaloso ea pin |
| 1 | 5V |
| 2 | D- |
| 3 | D+ |
| 4 | GND |
2.8 JLED2 pin interface
| Pin | Tlhaloso ea pin |
| 1 | PWR+ |
| 2 | PWR- |
| 3 | 4G- |
| 4 | 4G + |
2.9 JLED1 pin interface
| Pin | Tlhaloso ea pin |
| 1 | WIFI+ |
| 2 | WIFI- |
| 3 | ZIGB- |
| 4 | ZIGB+ |
2.10DEBUG1 segokanyimmediamentsi sa sebolokigolo
| Pin | Tlhaloso ea pin |
| 1 | RX |
| 2 | TX |
| 3 | GND |
2.11POWER1 segokanyimmediamentsi sa sebolokigolo
| Pin | Tlhaloso ea pin |
| 1 | ON |
| 2 | GND |
2.12 JCOM1 pin interface (ka ntle DB9 bakeng sa segokanyimmediamentsi sa morao-rao sa IO).
| Pin | Tlhaloso ea pin |
| 1 | DCD |
| 2 | RXD |
| 3 | TXD |
| 4 | DTR |
| 5 | GND |
| 6 | DSR |
| 7 | RTS |
| 8 | CTS |
| 9 | RI |
2.13JFAN1/2 segokanyimmediamentsi sa sebolokigolo
| Pin | Tlhaloso ea pin |
| 1 | GND |
| 2 | 5V |
| 3 | PWM_I |
| 4 | PWM_O |
Ho ea ka litlhoko tsa Mehato ea SJ/T113642014 ea Taolo ea Tšilafalo e tsoang ho Lihlahisoa tsa Tlhahisoleseding ea Elektroniki tse fanoeng ke Lekala la Indasteri ea Boitsebiso la People's Republic of China, ho tšoaea taolo ea tšilafalo ea sehlahisoa sena le ho tšoaea lintho tse chefo le tse kotsi kapa lintlha tsa sehlahisoa sena ke tse latelang:
Ho tšoaea lintho tse chefo le tse kotsi kapa likarolo sehlahisoa sena:
Lebitso le likahare tsa lintho tse chefo le tse kotsi kapa likarolo tsa sehlahisoa sena
| Karolo Lebitso | Lintho kapa lintho tse chefo le tse kotsi | |||||
| Pb | Hg | Cd | Kr (VI) | PB B | PBDE | |
| Boto ea PCB | X | ◯ | ◯ | ◯ | ◯ | ◯ |
| Karolo ea sebopeho | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ |
| Chip | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ |
| Sehokedi | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ |
| Likarolo tsa elektronike tse sa sebetseng le dikarolo |
X | ◯ | ◯ | ◯ | ◯ | ◯ |
| Tšepe e cheselitsoeng | X | ◯ | ◯ | ◯ | ◯ | ◯ |
| Molamu oa mohala | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ |
| Lisebelisoa tse ling | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ |
| ◯: Ho bolela hore likahare tsa ntho ena e chefo le e kotsi linthong tsohle tse tšoanang tsa karolo ena li ka tlase ho tekanyetso e boletsoeng ho GB/T 26572. X: Ho bolela hore litaba tsa ntho ena e chefo le e kotsi linthong tsohle tse homogeneous tsa karolo ena li feta tlhoko ea moeli e boletsoeng ho GB/T 26572. Hlokomela: Likahare tse etellang pele sebakeng sa X li feta moeli o boletsoeng ke GB/T 26572, empa li lumellana le karolo ea tokollo ea taelo ea RoHS ea EU. |
||||||
Phetolelo ea 1.0
Litokomane / Lisebelisoa
 |
JWIPC E088 Edge Box [pdf] Bukana ea Mosebelisi E088, E088 Edge Box, Edge Box, Box |