iSMACONTROLLI SFAR-S-16RO Modbus Input And Output module
TS'ELISO
| TS'ELISO | ||
| Phepelo ea motlakase | Moqtage | 10-38 V DC; 10-28 V AC |
| Tšebeliso ea matla | 4,8 W @ 24 V DC 7 VA @ 24 V AC | |
| Liphetho tsa relay | Liphetho tsa 16x Relay | |
| Mojaro o hanyetsanang le AC1: 3 A @ 230 V AC kapa 3 A @ 30 V DC | ||
| Mojaro o matla oa AC3. 75 VA @ 230 V AC kapa 30 W @ 30 V DC | ||
| Litaba tsa ho ikopanya le AgSnO2 | ||
| Sehokedi | RS485, lisebelisoa tse fihlang ho tse 128 ka bese | |
| sekhahla sa bolutu | Ho tloha ho 2400 ho isa ho 115200 bps | |
| Tšireletso ea ho kena | IP40 - bakeng sa ho kenya ka hare ho ntlo | |
| Mocheso | Ho sebetsa -10°C - +50°C; Sebaka sa polokelo -40°C - +85°C | |
| Mongobo o amanang | 5 ho 95% RH (ntle le condensation) | |
| Lihokelo | Boholo ba 2.5 mm2 | |
| Boemo | 119,1 mm x 101 mm x 22,6 mm | |
| Ho phahamisa | Ho kenya seporo sa DIN (DIN EN 50022) | |
| Thepa ea matlo | Plastiki, PC / ABS e itimang | |
SEKONYELA SEHLOHO 
PUSELETSO MAHLANYA 
TS'ELISO
PHEPELO EA MOTLAKASE
TLHOKOMELO
- Hlokomela, mohala o fosahetseng oa sehlahisoa sena o ka o senya mme oa lebisa likotsing tse ling. Netefatsa hore sehlahisoa se kentsoe ka nepo pele o bulela motlakase.
- Pele o kenya marang-rang, kapa o tlosa / o kenya sehlahisoa, etsa bonnete ba hore o tima motlakase. Ho hloleha ho etsa joalo ho ka baka ts'okelo ea motlakase.
- Se ke oa tšoara likarolo tsa motlakase tse kang litheminale tsa motlakase. Ho etsa joalo ho ka baka ts'oaetso ea motlakase.
- U se ke ua qhaqha sehlahisoa. Ho etsa joalo ho ka baka ts'ebetso ea motlakase kapa ts'ebetso e fosahetseng.
- Sebelisa sehlahisoa ka har'a mekhahlelo ea ts'ebetso e khothalelitsoeng ho latela maemo (mocheso, mongobo, voltage, ts'oenyeho, tsela e holimang, sepakapaka jj.). Ho hloleha ho etsa joalo ho ka baka mollo kapa ts'ebetso e fosahetseng.
- Ka tieo tiisa lithapo ho terminal. Ho se tiise lithapo tse lekaneng ho ka baka mollo.
LITŠOANTŠISO TŠEBELE 
Ngoliso ea phihlello
| Modbus | Dec | Hex | Ngolisa Lebitso | Phihlello | Tlhaloso |
| 30001 | 0 | 0x00 | Mofuta/Mofuta | Bala | Mofuta le mofuta oa |
| 30002 | 1 | 0x01 | Liphetoho | Bala | E fetola boemo |
| 40003 | 2 | 0x02 | Sekhahla sa Baud | Bala & Ngola | Sekhahla sa baud sa RS485 |
| 40004 | 3 | 0x03 | Emisa Bits & Data Bits | Bala & Ngola | Che ea li-stop bits & data |
| 40005 | 4 | 0x04 | Parity | Bala & Ngola | Parity hanyane |
| 40006 | 5 | 0x05 | Karabelo e lieha | Bala & Ngola | Ho lieha ha karabelo ho mof |
| 40007 | 6 | 0x06 | Mokhoa oa Modbus | Bala & Ngola | Mokhoa oa Modbus (ASCII kapa |
| 40009 | 8 | 0x08 | Mohlokomedi | Bala & Ngola | Mohlokomedi |
| 40013 | 12 | 0x0C | Boemo bo sa Feleng ba Tlhahiso | Bala & Ngola | Boemo ba tlhahiso ea kamehla |
|
40033 |
32 |
0x20 |
Lipakete tse amohetsoeng LSR (Reg.) |
Bala & Ngola |
Che ea lipakete tse amoheloang |
|
40034 |
33 |
0x21 |
Lipakete tse amohetsoeng tsa MSR (Tlhaloso ea Bohlokoa ka ho Fetisisa) |
Bala & Ngola |
|
| 40035 | 34 | 0x22 | Lipakete tse fosahetseng LSR | Bala & Ngola | Che ea lipakete tse amohetsoeng tse nang le phoso |
| 40036 | 35 | 0x23 | Lipakete tse fosahetseng tsa MSR | Bala & Ngola | |
| 40037 | 36 | 0x24 | Lipakete tse rometsoeng LSR | Bala & Ngola |
Che ea lipakete tse rometsoeng |
| 40038 | 37 | 0x25 | Lipakete tse rometsoeng tsa MSR | Bala & Ngola | |
| 40052 | 51 | 0x33 | Litholoana | Bala & Ngola | Boemo ba tlhahiso |
TS'ELISO TS'OANE
- Ka kopo bala litaelo pele u sebelisa kapa u sebelisa sesebelisoa. Haeba ho na le lipotso ka mor'a ho bala tokomane ena, ka kopo ikopanye le Sehlopha sa Tšehetso sa iSMA CONTROLLI
- (support@ismacontrolli.com).
- Pele o kenya mohala kapa o tlosa / o kenya sehlahisoa, etsa bonnete ba hore o tima motlakase. Ho hloleha ho etsa joalo ho ka baka ts'okelo ea motlakase.
- Wiring e sa nepahalang ea sehlahisoa e ka e senya 'me ea lebisa likotsing tse ling. Netefatsa hore sehlahisoa se kentsoe ka nepo pele o bulela motlakase.
- Se ke oa tšoara likarolo tsa motlakase tse kang litheminale tsa motlakase. Ho etsa joalo ho ka baka ts'okelo ea motlakase.
- U se ke ua qhaqha sehlahisoa. Ho etsa joalo ho ka baka ts'okelo ea motlakase kapa ts'ebetso e fosahetseng.
- Sebelisa sehlahisoa feela ka har'a mekhahlelo ea ts'ebetso e khothalletsoang ho latela maemo (mocheso, mongobo, voltage, ts'oenyeho, moo ho hloellang teng, sepakapaka, joalo-joalo). Ho hloleha ho etsa joalo ho ka baka mollo kapa ts'ebetso e fosahetseng.
- Ka tieo tiisa lithapo ho terminal. Ho hlōleha ho etsa joalo ho ka baka mollo.
- Qoba ho kenya sehlahisoa haufi le lisebelisoa tsa motlakase tse matla a phahameng le lithapo, li-inductive loads le li-switching. Ho ba haufi le lintho tse joalo ho ka baka tšitiso e sa laoleheng, e bakang ts'ebetso e sa tsitsang ea sehlahisoa.
- Tlhophiso e nepahetseng ea matla le pontšo ea cabling e ama ts'ebetso ea tsamaiso eohle ea taolo. Qoba ho kenya motlakase le lithapo tsa mats'oao ka har'a literei tsa cable tse bapileng. E ka etsa hore ho be le litšitiso ho matšoao a behiloeng leihlo le ho laola.
- E khothalletsoa ho laola matla / li-module tse nang le bafani ba motlakase ba AC / DC. Ba fana ka insulation e ntlafetseng le e tsitsitseng haholoanyane bakeng sa lisebelisoa ha e bapisoa le lisebelisoa tsa AC / AC transformer, tse fetisang likhathatso le liketsahalo tsa nakoana tse kang ho surge le ho phatloha ho lisebelisoa. Li boetse li arola lihlahisoa ho tsoa ho li-inductive phenomena ho tsoa ho li-transformer tse ling le meroalo.
- Sistimi ea phepelo ea motlakase bakeng sa sehlahisoa e lokela ho sireletsoa ke lisebelisoa tsa kantle tse fokotsang ho fetatage le liphello tsa ho tsoa ha lehalima.
- Qoba ho matlafatsa sehlahisoa le lisebelisoa tsa sona tse laoloang / tse hlokometsoeng, haholo-holo matla a phahameng le meroalo e kenyang matla, ho tsoa mohloling o le mong oa matla. Lisebelisoa tsa matla tse tsoang mohloling o le mong oa matla li baka kotsi ea ho hlahisa litšitiso ho tloha mejaro ho ea ho lisebelisoa tsa taolo.
- Haeba AC/AC transformer e sebelisoa ho fana ka lisebelisoa tsa taolo, ho khothaletsoa ka matla ho sebelisa sefetoleli se phahameng sa 100 VA Class 2 ho qoba litlamorao tse sa batleheng, tse kotsi bakeng sa lisebelisoa.
- Mehala e telele ea ho shebella le ho laola e ka baka li-loops mabapi le phepelo ea motlakase e arolelanoang, e bakang litšitiso ts'ebetsong ea lisebelisoa, ho kenyelletsa le puisano ea kantle. Ho khothalletsoa ho sebelisa li-separators tsa galvanic.
- Ho sireletsa likhoele tsa mats'oao le likhokahano khahlano le litšitiso tse kantle tsa motlakase, sebelisa likhoele tse sirelelitsoeng hantle le lifaha tsa ferrite.
- Ho fetola liphatlalatso tsa dijithale tsa meroalo e meholo e kholo (e fetelletseng) ho ka baka tšitiso ho lisebelisoa tsa elektroniki tse kentsoeng ka har'a sehlahisoa. Ka hona, ho kgothaletswa ho sebelisa li-relay / li-contactor tse ka ntle, joalo-joalo ho fetola meroalo e joalo. Tšebeliso ea li-controller tse nang le liphetho tsa triac li boetse li fokotsa overvolve e tšoanangtage phenomena.
- Liketsahalo tse ngata tsa tšitiso le ho fetellatage in control system e hlahisoa ke switched, inductive loads e fanoang ke alternating mains vol.tage (AC 120/230 V). Haeba li se na li-circuits tse hahelletsoeng kahare tsa ho fokotsa lerata, ho khothaletsoa ho sebelisa lipotoloho tse kantle joalo ka li-snubber, li-varistors, kapa li-diode tsa ts'ireletso ho fokotsa litlamorao.
- Ho kenngoa ha motlakase oa sehlahisoa sena ho tlameha ho etsoa ho ea ka likhoutu tsa wiring tsa naha le ho lumellana le melao ea libaka.
- iSMA CONTROLLI SpA – Via Carlo Levi 52, 16010 Sant'Olcese (GE) – Italy
- support@ismacontrolli.com
- www.ismacontrolli.com
- Tataiso ea ho Kena| Khatiso ea 1 Rev. 1 | 05/2022
Litokomane / Lisebelisoa
 |
iSMACONTROLLI SFAR-S-16RO Modbus Input And Output module [pdf] Buka ea Taelo SFAR-S-16RO Modbus Input and Output Module, SFAR-S-16RO, Modbus Input and Output Mojule, Input and Output Module, Output Module, Mojule |
