E tsoetseng pele 2/4/8-Port DisplayPort Sireletsehile KVM Switch
MOEKETSI MOSEBETSI
| SDPN-2S | 2-Port Secure DisplayPort KVM e nang le Audio |
| SDPN-2D | 2-Port Secure Dual-Head DisplayPort KVM e nang le Audio |
| SDPN-2S-P | 2-Port Secure DisplayPort KVM e nang le Audio le CAC Support |
| SDPN-2D-P | 2-Port Secure Dual-Head DisplayPort KVM e nang le Tšehetso ea Audio le CAC |
| SDPN-4S | 4-Port Secure DisplayPort KVM e nang le Audio |
| SDPN-4D | 4-Port Secure Dual-Head DisplayPort KVM e nang le Audio |
| SDPN-4S-P | 4-Port Secure DisplayPort KVM e nang le Audio le CAC Support |
| SDPN-4D-P | 4-Port Secure Dual-Head DisplayPort KVM e nang le Tšehetso ea Audio le CAC |
| SDPN-4Q-P | 4-Port Secure Quad-Head DisplayPort KVM e nang le Audio le CAC Support |
| SDPN-8S | 8-Port Secure DisplayPort KVM e nang le Audio |
| SDPN-8S-P | 8-Port Secure DisplayPort KVM e nang le Audio le CAC Support |
LIEKETSENG MOKHOPO
| VIDEO | |||
| Sebopeho | DisplayPort | ||
| Sebaka sa Phallo | SDPN-2S/SDPN-2S-P | (2) DisplayPort 20-pin (basali) | |
| SDPN-2D/SDPN-2D-P/ SDPN-4S/SDPN-4S-P | (4) DisplayPort 20-pin (basali) | ||
| SDPN-4D/SDPN-4D-P/ SDPN-8S/SDPN-8S-P | (8) DisplayPort 20-pin (basali) | ||
| SDPN-4Q-P | (16) DisplayPort 20-pin (basali) | ||
| User Console Interface | SDPN-2S/SDPN-2S-P/ SDPN-4S/SDPN-4S-P/ SDPN-8S/SDPN-8S-P | (1)DisplayPort 20-pin (e tshehadi) | |
| SDPN-2D/SDPN-2D-P/ SDPN-4D/SDPN-4D-P | (2)DisplayPort 20-pin (e tshehadi) | ||
| SDPN-4Q-P | (4) DisplayPort 20-pin (basali) | ||
| Qeto ea Max | 3840×2160 @ 30Hz | ||
| DDC | 5 volts pp (TTL) | ||
| Kenyeletso ya Tekatekano | Ka ho iketsa | ||
| Kena Bolelele ba Cable | Ho fihla ho 20 ft. | ||
| Khumo Bolelele ba Cable | Ho fihla ho 20 ft. | ||
| USB | |||
| Mofuta oa Letšoao | USB 1.1 le 1.0 Keyboard le Mouse feela. USB 2.0 bakeng sa khokahano ea CAC. | ||
| Mofuta oa A ho ea ho B | SDPN-2S/SDPN-2D | (2) | |
| SDPN-2S-P/SDPN-2D-P/SDPN-4S/SDPN-4D | (4) | ||
| SDPN-4S-P/SDPN-4D-P/SDPN-4Q-P/SDPN-8S | (8) | ||
| SDPN-8S-P | (16) | ||
| User Console Interface | (2) USB Type-A bakeng sa khokahano ea keyboard le mouse feela | ||
| (1) USB Type-A bakeng sa khokahanyo ea CAC (mefuta ea P feela) | |||
| MUDIO | |||
| Kenyeletso | (2)/(4)/(8) Sehokedi Stereo 3.5mm Mosadi | ||
| Sephetho | (1) Sehokelo Stereo 3.5mm E Motšehali | ||
| MATLA | |||
| Litlhoko tsa Matla | 12V DC, 2A (bonyane) adaptara ea matla e nang le polarity e ntle ea pini e bohareng. Meetso ea lihlooho tse quad e hloka adaptara ea matla ea 12V DC 3A (bonyane) e nang le polarity e bohareng ea pin. | ||
| TIKOLOHO | |||
| Mocheso oa Ts'ebetso | 32° ho isa ho 104° F (0° ho isa ho 40° C) | ||
| Mocheso oa polokelo | -4° ho isa ho 140° F (-20° ho isa ho 60° C) | ||
| Mongobo | 0-80% RH, e sa fokotseng | ||
| MATS'ELISO | |||
| Kamohelo ea Tšireletso | Mekhoa e Tloaelehileng e Tiisitsoe ho NIAP, Protect Profile PSS Ver. 3.0 | ||
| TSE LING | |||
| Emulation | USB 1.1 le USB 2.0 e tsamaellana | ||
| Taolo | Likonopo tsa Front Panel | ||
E tsoetseng pele 2/4/8-Port DisplayPort Sireletsehile KVM Switch
KE ENG E KA LEKOSONG?
| Setsi sa SDPN | 2/4/8-port Sireletsehile DisplayPort KVM Switch |
| PS12VDC2A kapa PS12VDC3A | 12V DC, 2A (bonyane) adaptara ea matla e nang le polarity e ntle ea pini e bohareng. Meetso ea lihlooho tse quad e hloka adaptara ea matla ea 12V DC 3A (bonyane) e nang le polarity e bohareng ea pin. |
| Bukana ea Mosebelisi |
TS'IRELETSO MAKHABANE
Khahlano le Tamper Liphetoho
Mohlala o mong le o mong o na le Anti-T ea kahareamper switches, e leng ntho e lekang ho bula sebaka se kampetsoeng sa sesebelisoa. Hang ha sistimi e tsebahatsa teko e joalo, li-LED tsohle tse ka pele li tla benya ka potlako mme yuniti e tla hloka thuso ka ho koala khokahano le li-PC tsohle tse hokelletsoeng le lisebelisoa tse sitisang ts'ebetso efe kapa efe.
Tamper-Evident Tiiso
Sebaka se kampetsoeng sa yuniti se sirelelitsoe ka hoamper-evident seal ho fana ka bopaki ba pono haeba yuniti e butsoe.
Firmware e sirelelitsoeng
Molaoli oa yuniti o na le ts'ireletso e khethehileng e thibelang ho hlophisa bocha kapa ho bala firmware.
Ho itšehla thajana ho Holimo Likanaleng tsa USB
Li-Opto-isolator li sebelisoa yuniti ho boloka litsela tsa data tsa USB li arohane ka motlakase ho tse ling, li fana ka karohano e phahameng le ho thibela ho lutla ha data lipakeng tsa likou.
Sireletsa EDID Emulation
Yuniti e thibela data e sa batleheng le e sa sireletsehang hore e fetisoe ka mela ea DDC ka mokhoa o sireletsehileng oa ho ithuta le ho etsisa EDID.
KEKETSO
TSAMAISO LIHLOKO
- iPGARD Secure PSS e tsamaisana le likhomphutha tse tloaelehileng tsa motho / tse nkehang, li-server kapa bareki ba tšesaane, ba tsamaisang lits'ebetso tse joalo ka Windows kapa Linux.
- Lisebelisoa tsa peripheral tse tšehetsoeng ke KVM li thathamisitsoe tafoleng e latelang:
| Kou ea Console | Lisebelisoa tse lumelletsoeng |
| Keyboard | Khiboto e nang le lithapo le keypad ntle le hub ea ka hare ea USB kapa lisebelisoa tsa lisebelisoa tse kopantsoeng, ntle le haeba sesebelisoa se hokahantsoeng se na le bonyane ntlha e le 'ngoe e leng keyboard kapa mouse HID class, KVM/KM extender; |
| Audio tsoa | Analoge amplibui tse lohiloeng, li-headphones tsa Analog, sesebelisoa sa audio sa Digital. |
| Tweba/Sesebediswa sa ho supa | Toeba efe kapa efe e nang le terata kapa bolo ea pina ntle le hub ea kahare ea USB kapa lisebelisoa tse kopaneng tsa sesebelisoa, Sekirini sa ho ama, Multi-touch kapa digitizer, KVM/KM extender. |
| Sesebediswa sa netefatso ya mosebedisi | Sebali sa likarete tse bohlale, sebali sa PIV/CAC, sebali sa Token kapa Biometric* |
Lethathamo la 5-1
*TOE -P le -X mefuta feela
Lihlopha tsa Motho a le Mong:
- Netefatsa hore motlakase o timiloe kapa o khaotsoe ho yuniti le likhomphutha.
- Sebelisa thapo ea DisplayPort ho hokela boema-kepe ba tlhahiso ea DisplayPort ho tloha komporong e 'ngoe le e' ngoe ho ea likoung tse tsamaellanang tsa DisplayPort IN tsa yuniti.
- Sebelisa thapo ea USB (Mofuta oa A ho ea ho Mofuta oa B) ho hokela kou ea USB komporong e 'ngoe le e 'ngoe ho likou tsa USB tsa yuniti.
- Hokela thapo ya modumo ya stereo (3.5mm ho ya ho 3.5mm) ka boikgethelo ho hokela tlhahiso ya modumo ya dikhomphutha ho AUDIO IN boemakepe ba yuniti.
- Hokela sebali ho koung ea kholiso ea DisplayPort OUT ea yuniti u sebelisa thapo ea DisplayPort.
- Hokela keyboard ea USB le mouse likoung tse peli tsa khomphutha tsa USB.
- Hokela libui tsa stereo ka boikhethelo boema-kepe ba AUDIO OUT ba yuniti.
- Hokela CAC (COMMON ACCESS CARD, SMART CARD READER) ka boikhethelo boema-kepeng ba CAC ka har'a khokahanyo ea mosebelisi. Bakeng sa Mehlala ea -P le -X.
- Qetellong, matla ho KVM ka ho hokahanya motlakase oa 12VDC ho sehokelo sa matla, ebe o bulela likhomphutha tsohle.
Hlokomela: Khomphuta e hoketsoeng ho port 1 e tla lula e khethoa ka mokhoa oa kamehla kamora ho tima.
Hlokomela: O ka hokela likhomphutha tse fihlang ho tse 2 ho 2 port KVM le likhomphutha tse fihlang ho tse 4 ho 4 port KVM.
LITEMOSO TSA TLHOKOMELISO - Ka mabaka a ts'ireletso:
- Sehlahisoa sena ha se sebelise lisebelisoa tse se nang mohala. Se ke oa leka ho sebelisa keyboard e se nang mohala kapa mouse e se nang mohala ka sehlahisoa sena.
- Sehlahisoa sena ha se sebelise likonopo tse nang le li-hubs tsa USB tse kopaneng kapa likou tsa USB. Sebelisa feela likonopo tsa USB tse tloaelehileng (HID) ka sesebelisoa sena.
- Sehlahiswa sena ha se tshehetse ho kenya maekrofounu kapa ho kenya mohala. Se ke oa hokela li-microphone kapa li-headset le li-microphone ho sesebelisoa sena.
- Khokahano ea lisebelisoa tsa netefatso (CAC) le mehloli ea matla a kantle e thibetsoe.
INSTALLATION (E tsoela pele)
Mefuta e mengata ea Lihlooho:
- Netefatsa hore motlakase o timiloe kapa o khaotsoe ho yuniti le likhomphutha.
- Sebelisa lithapo tsa DisplayPort ho hokela likou tse hlahisoang ke DisplayPort tsa komporo e 'ngoe le e 'ngoe ho likou tse tsamaellanang tsa DisplayPort IN tsa yuniti. Bakeng sa mohlalaample, haeba u sebelisa SDPN-4Q, likou tse 'ne tsa DisplayPort tsa komporo e le' ngoe li tlameha ho hokela mocha o le mong.
Lihokelo tsa DisplayPort IN tseo e leng tsa kanale e le 'ngoe li hlophisoa ka ho otloloha. - Sebelisa thapo ea USB (Mofuta oa A ho ea ho Mofuta oa B) ho hokela kou ea USB komporong e 'ngoe le e 'ngoe ho likou tsa USB tsa yuniti.
- Hokela thapo ea molumo ea stereo ka boikhethelo (3.5mm lipheletsong ka bobeli) ho hokela molumo oa khomphutha ho li-port tsa AUDIO IN tsa yuniti.
- Hokela li-monitor ho li-console tsa DisplayPort OUT tsa yuniti u sebelisa likhoele tsa DisplayPort.
Likou tsa DisplayPort IN moleng o le mong li tla fetisetsoa ho DisplayPort OUT ea mola o le mong. - Hokela keyboard ea USB le mouse likoung tse peli tsa khomphutha tsa USB.
- Hokela libui tsa stereo ka boikhethelo boema-kepe ba AUDIO OUT ba yuniti.
- Hokela CAC (smart card reader) ka boikhethelo boema-kepeng ba CAC ho sehokelo sa khomphutha sa mosebelisi.
- Matla ho KVM ka ho hokahanya phepelo ea motlakase ea 12VDC ho sehokelo sa matla, ebe o bulela likhomphutha tsohle.
Hlokomela: Khomphuta e hoketsoeng ho port 1 e tla lula e khethoa ka mokhoa oa kamehla kamora ho tima.
EDID Ithute:
Video ea kamehla ea feme ea EDID e behiloe ho HP (1080P max resolution) ho lumella ts'ebetso ea pele ka mefuta e mengata ea ponts'o ea DP. Bakeng sa mabaka a ts'ireletso, EDID e ithuta ka mefuta e mengata ea lipontšo tsa DP e ka finyelloa feela ke Mookameli ea Tiisitsoeng.
Sebelisa mehato e latelang ho theha thuto ea hau ea EDID hantle:
- Netefatsa hore motlakase o khaotsoe kapa o tingoe ho yuniti le komporong.
- U sebelisa thapo ea USB (Mofuta-A ho ea ho Mofuta oa B), hokela PC ho K/M Port 1 ea moamoheli oa KVM.
- Hokela keyboard ea USB le mouse likoung tse peli tsa khomphutha tsa USB.
- Hokela thapo ea video ea DP lipakeng tsa PC le DP video Port 1 ea moamoheli oa KVM.
- Hokela ponts'o ea DP koung ea tlhahiso ea DP ea KVM.
- Matlafatsa PC le switch ea KVM.
- Khoasolla Sesebelisoa sa Tsamaiso le Ts'ireletso ho komporo ea hau ho tsoa sehokelong sena: https://ipgard.com/tools-software/
- Matha Sesebelisoa sa Tsamaiso le Ts'ireletso ea Ts'ireletso se ka phethisoang file.
Qala lenaneo u sebelisa mehato e latelang ho Sesebelisoa sa Tsamaiso le Ts'ireletso ea Ts'ireletso:
- Ngola "alt cnfg" ho keyboard ea hau
- Toeba e hokahantsoeng le KVM e tla emisa ho sebetsa 'me u tla susumelletseha ho "kena id ea netefatso"
- Kena joalo ka motsamaisi ka ho kenya lebitso la mosebelisi la kamehla "admin", ebe o tobetsa Enter.
- Kenya phasewete ea kamehla “1 2 3 45″ ebe o tobetsa Enter.
- Likhetho tse supileng li tla hlaha lenaneng la linomoro: khetha khetho ea 6 ebe o tobetsa Enter.
- Ho tla hlaha menu e o lebisang ho Khetha Mokhoa; ho e-na le hoo, thaepa "local" ebe o tobetsa Enter.
Sesebelisoa sa Tsamaiso le Ts'ireletso ea Ts'ireletso joale se tla ithuta le ho boloka EDID ea ponts'o, ebe sesebelisoa se tla qala bocha le ho qala bocha. Qetellong ea boot-up, etsa bonnete ba hore likhomphutha tsohle li hokahane le switch ea KVM ka har'a boema-kepe bo bong le bo bong ho netefatsa hore bohle ba hlahisa video hantle ponts'ong e hokahaneng.
Bakeng sa thuso e eketsehileng kapa tlhahisoleseding, ka kopo sheba ho IPGard Secure KVM EDID Configuration Guide e fumanehang ho www.ipgard.com/documentation.
MOKHOA OA HLOOHO E LE SENG KM PHETOA
Ntle le ho feto-fetoha ha liteishene tsa setso ka likonopo tse karolong e ka pele, KM e boetse e ts'ehetsa taolo ea li-cursor ea liteishene tse khethiloeng. Theknoloji ena e lumella ho fetoha ka mokhoa o se nang moeli pakeng tsa lik'homphieutha ka ho tsamaisa sekheo sa mouse ho tloha ponts'o e 'ngoe ho ea ho e' ngoe. Basebedisi ba ka fetola lik'homphieutha ka thata hore ba be le tlhahiso e potlakileng.
- Ts'ebetso ea KM bakeng sa lisebelisoa tsa KVM e fumaneha feela hang ha sesebelisoa se kentsoe mokhoeng oa KM, sheba tataiso ea lisebelisoa tsa admin bakeng sa lintlha.
- Ha sesebelisoa se behiloe ka mokhoa oa KM, se tla itšoara ka mokhoa o ts'oanang le mefuta ea KM ea sehlahisoa.
- Phapang e kholo ha sesebelisoa se behiloe mokhoeng oa KM ke hore taolo ea li-cursor ea likanale tse khethiloeng e fumaneha e le mokhoa o eketsehileng oa ho chencha komporo e hokahaneng.
- Setšoantšo sa 10-1 se ka tlase se bontša kamoo ts'ebetso ena e sebetsang kateng.
- Bakeng sa tlhaiso-leseling e batsi mabapi le mokhoa oa ho hlophisa ts'ebetso ena, sheba Tataiso ea KM.
MOKHOA OA LIHLOOHO TSE MANGATA KM PHETOA
Ha u sebelisa lik'homphieutha tse nang le lipontšo tse ngata, taolo ea li-cursor ea likanale tse khethiloeng e lumella ho fetola pakeng tsa lik'homphieutha ka ho sebelisa litoeba tse bonolo le boitšisinyo. Ha ho hlokahale mokhanni oa lisebelisoa.
Tobetsa feela lebili la moqolo habeli ebe u tsamaisa toeba ka lehlakoreng la mocha oo u lakatsang ho fetohela ho ona.
Hlokomela: Karolo ena e sebetsa feela ka mokhoa oa Multi-Head display.
KENYATSO EA CAC (CARETE EA TLOAELEHILENG, SEBALI SA SMART CARD).
Mehato e latelang e reretsoe mookameli oa tsamaiso kapa mookameli oa IT feela.
Haeba u na le likou tsa boikhethelo tsa CAC ho tla ba le likou tse 2 ho li-port tse 2 tsa KVM le likou tse 4 ho li-ports tse 4 tsa KVM.
Khokahano ea CAC komporong e hloka khokahano ea thapo ea USB e arohaneng le keyboard le mouse.
Sena se lumella CAC hore e hokahane e ikemetse ho keyboard le mouse. E boetse e lumella mosebelisi ho khetha hore na CAC bakeng sa komporo e itseng e tšehelitsoe kapa che.
- Netefatsa hore motlakase o timiloe kapa o khaotsoe ho yuniti le komporong.
- Sebelisa thapo ea USB (Mofuta-A ho ea ho Mofuta oa B) ho hokela kou ea USB komporong ho likoung tsa eona tsa CAC USB tse ho KVM. Se ke oa hokela thapo ea USB haeba ts'ebetso ea CAC e sa hlokehe bakeng sa komporo eo.
- Hokela CAC (sebali sa karete e bohlale) boema-kepeng ba CAC sehokelong sa khomphutha sa mosebelisi.
- Matla ho KVM ka ho hokahanya phepelo ea motlakase ea 12VDC ho sehokelo sa matla, ebe o bulela likhomphutha tsohle.
- Ho tima CAC bakeng sa kanale efe kapa efe (likou tsohle tsa CAC li lumelletsoe joalo ka kamehla), sebelisa likonopo tse ka pele ho chencha KVM ho seteishene seo mokhoa oa CAC o lakatsang ho se fetola. Hang ha mocha o khethiloe, konopo ea LED bakeng sa mocha ona o khethehileng o lokela ho buloa (CAC port e nolofalitsoe). Tobetsa 'me u tšoare konopo bakeng sa metsotsoana e 3 ho fihlela konopo ea LED e tima. Boema-kepe ba CAC bo se bo koaletsoe mocha ona.
- Ho nolofalletsa CAC bakeng sa mocha ofe kapa ofe, sebelisa likonopo tsa phanele e ka pele ho chencha KVM ho mocha oo mokhoa oa CAC o batlang ho o fetola. Hang ha mocha o khethiloe, konopo ea LED bakeng sa mocha ona o khethehileng o lokela ho tima (CAC port e holofetse). Tobetsa 'me u tšoare konopo bakeng sa metsotsoana e 3 ho fihlela konopo ea LED e bulela. Boema-kepe ba CAC bo se bo lumelletsoe mocha ona.
TS'ELISO CAC KOU
Mehato e latelang e reretsoe mookameli oa tsamaiso le basebetsi (basebedisi).
Hlokomela: Ho hlokahala komporo e le 'ngoe feela e hoketsoeng ho port 1 bakeng sa ts'ebetso ena Configuration ea boema-kepe ba CAC ke karolo ea boikhethelo, e lumellang ngoliso ea peripheral efe kapa efe ea USB ho sebetsa le KVM. Ke pheriferale e le 'ngoe feela e ka ngolisoang mme ke pheriferale e ngolisitsoeng feela e tla sebetsa le KVM. Ka mokhoa o ikhethileng, ha ho se na peripheral e ngolisitsoeng, KVM e tla sebetsa le Smart Card Reader efe kapa efe.
Lokisa Boema-kepe ba CAC ka Likhetho tsa Menu ea Basebelisi
- Bula Lenaneo la Tsamaiso le Ts'ireletso ea Ts'ireletso.
- U sebelisa keyboard, tobetsa konopo ea Alt habeli ebe u ngola "cnfg".
- Hona stage toeba e hoketsoeng ho KVM/KM e tla emisa ho sebetsa.
- Kenya lebitso la mosebelisi la kamehla "user" ebe o tobetsa Enter.
- Kenya phasewete ea kamehla "12345" ebe o tobetsa Enter.
- Khetha khetho ea 2 ho tsoa ho menu e skrineng sa hau ebe o tobetsa Enter.
- Hokela sesebelisoa sa peripheral hore se ngolisoe koung ea USB ea CAC ka lehlakoreng la khomphutha ea KVM/KM 'me u eme ho fihlela KVM/KM e bala lintlha tse ncha tsa peripheral.
- KVM/KM e tla thathamisa tlhahisoleseding ea peripheral e hokahantsoeng skrineng le ho buzz makhetlo a 3 ha ngoliso e phethiloe.
TLHOKOMELISO: Ho lahla Log ea Ketsahalo ka Likhetho tsa Menu ea Basebelisi
Mehato e latelang e reretsoe mookameli oa tsamaiso.
Hlokomela: Ho hlokahala komporo e le 'ngoe feela e hoketsoeng ho port 1 bakeng sa ts'ebetso ena
Lethathamo la Ketsahalo ke tlaleho e qaqileng ea mesebetsi ea bohlokoa e bolokiloeng mohopolong oa KVM kapa oa KYM. Lenane le felletseng la likarolo le tataiso bakeng sa Lisebelisoa tsa Tsamaiso le Ts'ireletso li ka fumanoa ho Tataiso ea Tsamaiso e fumanehang bakeng sa ho khoasolla ho tsoa ho: http://ipgard.com/documentation/
Ho view kapa u lahle Lethathamo la Ketsahalo:
- Bula Lenaneo la Tsamaiso le Ts'ireletso ea Ts'ireletso
- U sebelisa keyboard, tobetsa konopo ea Alt habeli ebe u ngola "cnfg".
- Kenya lebitso la kamehla la admin "admin" ebe o tobetsa Enter.
- Kenya password ea kamehla "12345" ebe o tobetsa Enter.
- Kopa ho Lahlela Litlaleho ka ho khetha khetho ea 5 ho menu. (E bontšitsoe setšoantšong sa 12-1)
* Sheba Tataiso ea Tsamaiso ea Tsamaiso le Ts'ireletso bakeng sa tlhaiso-leseling e batsi.
RESET: Khutlisa Li-Defactory tsa Feme
Mehato e latelang e reretsoe mookameli oa tsamaiso.
Hlokomela: Ho hlokahala komporo e le 'ngoe feela e hoketsoeng ho port 1 bakeng sa ts'ebetso ena
Khutlisa Li-Defaults tsa Feme li tla hlophisa litlhophiso tsohle ho KVM ho ea maemong a tsona a mantlha
Mokhoa oa KVM
Ngoliso ea boema-kepe ba CAC e tla tlosoa
Litlhophiso tsa KVM li tla khutlisetsoa ho liphoso tsa feme
Ho Khutlisa Li-Defactors tsa Feme ka Likhetho tsa Menu ea Basebelisi:
- Bula Lenaneo la Tsamaiso le Ts'ireletso ea Ts'ireletso
- U sebelisa keyboard, tobetsa konopo ea Alt habeli ebe u ngola "cnfg"
- Kenya lebitso la kamehla la admin "admin" ebe o tobetsa Enter.
- Kenya password ea kamehla "12345" ebe o tobetsa Enter.
- Khetha khetho ea 7 ho tsoa ho menu e skrineng sa hau ebe o tobetsa Enter. (Lenaneo le bontšitsoeng ho Setšoantšo sa 12-1)
* Sheba Tataiso ea Tsamaiso ea Tsamaiso le Ts'ireletso bakeng sa tlhaiso-leseling e batsi.
TŠEBELETSO EA LED
Sebopeho sa Console ea mosebelisi - Bontša LED:
| # | Boemo | Tlhaloso |
| 1 | E tima | Monitor ha e ea hokahanngoa |
| 2 | On | Monitor e hokahane |
| 3 | Ho benya | Bothata ba EDID - Ithute EDID ho lokisa bothata |
Sebopeho sa Consolese ea mosebelisi - CAC LED:
| # | Boemo | Tlhaloso |
| 1 | E tima | CAC ha e hokahane |
| 2 | On | CAC e lumelletsoeng le e sebetsang e hokahane |
| 3 | Ho benya | Pheriferale e seng ea CAC e hokahane |
Front Panel - Port Selection LED's:
| # | Boemo | Tlhaloso |
| 1 | E tima | Boema-kepe bo sa khethoang |
| 2 | On | Kou e khethiloeng |
| 3 | Ho benya | Thuto ea EDID e ntse e tsoela pele |
Front Panel - CAC Selection LED's:
| # | Boemo | Tlhaloso |
| 1 | E tima | Boema-kepe ba CAC bo koetsoe kapa boema-kepe bo sa khethoang |
| 2 | On | Boema-kepe ba CAC bo lumelletsoe |
| 3 | Ho benya | Thuto ea EDID e ntse e tsoela pele |
Front Panel - Port le CAC Selection LED's:
| # | Boemo | Tlhaloso |
| 1 | Tsohle tse Flashing | Sebaka se hoketsoeng ho keyboard kapa likou tsa mouse se hanngoe |
BOHLOKOA!
Haeba li-LED tsohle tsa Front Panel li ntse li benya 'me buzzer e ntse e lla, KVM e bile T.AMPERED e nang le mesebetsi eohle e holofalitsoe ruri. Ka kopo ikopanye le thuso ea tekheniki ea iPGARD ho support@iPGARD.com.
Haeba li-LED tsa Front Panel li butse 'me li sa benye, POWER UP SELF TEST e hlolehile mme mesebetsi eohle e koetsoe. Lekola hore na ho na le likonopo life kapa life tsa khetho ea boema-kepe ba ka pele li petelitsoeng. Tabeng ena, lokolla konopo e koetsoeng 'me u sebelise matla hape. Haeba boitlhahlobo ba motlakase bo ntse bo hloleha, ka kopo ikopanye le tšehetso ea tekheniki ea iPGARD ho support@iPGARD.com.
EDID Ithute - Front Panel LED's:
Li-LED tsohle li buletsoe motsotsoana o le mong. Joale:
- Li-LED tsa Port 1 li tla benya ho fihlela qetellong ea ts'ebetso.
- Port 2 LED's e tla khanya ho fihlela qetellong ea ts'ebetso haeba boto ea bobeli ea video e le teng (Dual-head KVM)
- Li-LED tsa Port 3 li tla benya ho fihlela qetellong ea ts'ebetso haeba boto ea boraro ea video e le teng (Quad-head KVM)
- Port 4 LED's e tla khanya ho fihlela qetellong ea ts'ebetso haeba boto ea bone ea video e le teng (Quad-head KVM)
TS'EBETSO TS'OANELO
Front Panel Control
Ho fetohela boema-kepeng ba ho kenya, tobetsa feela konopo ea ho kenya eo u e batlang karolong e ka pele ea KVM. Haeba sebaka sa ho kenya se khethiloe, LED ea kou eo e tla bulela.
HO BATLE PHOSO
Ha ho Matla
- Etsa bonnete ba hore adaptara ea motlakase e hoketsoe ka mokhoa o sireletsehileng ho sehokelo sa motlakase sa yuniti.
- Sheba bophahamo ba modumotage ea phepelo ea motlakase le ho etsa bonnete ba hore voltagboleng ba e ke hoo e ka bang 12VDC.
- Fetola phepelo ea motlakase.
Ha ho Video
- Sheba hore na lithapo tsohle tsa video li hokahane hantle.
- Hokela komporo ka kotloloho ho sebali ho netefatsa hore sebali le komporo ea hau li sebetsa hantle.
- Qala lik'homphieutha bocha
Keyboard ha e sebetse
- Sheba hore na keyboard e hokahane hantle le yuniti.
- Sheba hore na lithapo tsa USB tse hokahanyang yuniti le likhomphutha li hokahane hantle.
- Leka ho hokela USB komporong ho koung e 'ngoe.
- Etsa bonnete ba hore keyboard e sebetsa ha e hokahane ka kotloloho khomphuteng.
- Tlosa keyboard.
Hlokomela: Lits'oants'o tsa LED tsa NUM, CAPS, le SCROLL Lock tse ho keyboard ha lia lokela ho khantša haeba li hokahane le KVM.
Peba ha e sebetse
- Sheba hore na mouse e hokahane hantle le yuniti.
- Leka ho hokela USB komporong ho koung e 'ngoe.
- Etsa bonnete ba hore mouse e sebetsa ha e hokahane ka kotloloho khomphuteng.
- Tlosa mouse.
Ha ho Audio
- Sheba hore na lithapo tsohle tsa molumo li hokahane hantle.
- Hokela libui ka ho toba khomphuteng ho netefatsa hore libui le molumo oa k'homphieutha li sebetsa hantle.
- Lekola litlhophiso tsa molumo komporong 'me u netefatse hore tlhahiso ea molumo e tsoa ka libui.
Ha ho CAC (COMMON ACCESS CARD, SMART CARD READER)
- Sheba hore na lithapo tsa USB tse hokahanyang yuniti le likhomphutha li hokahane hantle.
- Etsa bonnete ba hore boema-kepe ba CAC bo buletsoe.
TŠEHETSO EA TEKHENIKI
Bakeng sa lipotso mabapi le sehlahisoa, lipotso tsa tiisetso, kapa lipotso tsa tekheniki, ka kopo ikopanye info@PGARD.com.
MOEKETSI TIISETSO
A. Boholo ba tiisetso e lekanyelitsoeng
iPGARD, Inc. e fana ka tiisetso ho bareki ba ho qetela hore sehlahisoa sa iPGARD se boletsoeng ka holimo se ke ke sa ba le mathata a thepa le moetso oa nako ea selemo se le seng, e leng nako e qalang ka letsatsi leo moreki a se rekileng. Moreki o ikarabella ho boloka bopaki ba letsatsi leo a rekileng ka lona.
Tiisetso e lekanyelitsoeng ea iPGARD e akaretsa feela liphoso tse hlahang ka lebaka la tšebeliso e tloaelehileng ea sehlahisoa, 'me ha e sebetse ho efe kapa efe:
a. Tlhokomelo e sa lokang kapa e sa lekaneng kapa diphetoho
b. Ts'ebetso e kantle ho litekanyetso tsa sehlahisoa
c. Tlhekefetso ea mechine le ho pepesehela maemo a matla
Haeba iPGARD e fumana, nakong ea tiisetso e sebetsang, tsebiso ea bofokoli, iPGARD e tla ka boikhethelo ba eona ho nkela sebaka kapa ho lokisa sehlahisoa se senyehileng. Haeba iPGARD e sa khone ho khutlisa kapa ho lokisa sehlahisoa se nang le bothata se koahetsoeng ke tiisetso ea iPGARD ka nako e lekaneng, iPGARD e tla buseletsa litšenyehelo tsa sehlahisoa.
iPGARD ha e na tlameho ea ho lokisa, ho khutlisa kapa ho khutlisa yuniti ho fihlela moreki a khutlisetsa sehlahisoa se nang le bothata ho iPGARD.
Sehlahisoa sefe kapa sefe se ka nkelang sebaka se secha kapa sa tšoana le se secha, ha feela se na le tšebetso e lekanang le ea sehlahisoa se nkeloang sebaka.
tiisetso e fokolang ea iPGARD e sebetsa naheng efe kapa efe moo sehlahisoa se koahetsoeng se ajoang ke iPGARD.
B. Meeli ea tiisetso
Ho isa tekanyong e lumelletsoeng ke molao oa lehae, iPGARD kapa bafani ba eona ha ba fane ka tiisetso kapa maemo a mofuta ofe kapa ofe ho sa tsotellehe hore na o hlahisoa kapa o boleloa mabapi le sehlahisoa sa iPGARD, 'me ka ho khetheha ba hana litiisetso kapa maemo a thekiso, boleng bo khotsofatsang le ho phela hantle. ka sepheo se itseng.
C. Mefokolo ea melato
Ho ea moo molao oa lehae o lumellang litlhare tse fanoeng setatementeng sena sa tiisetso ke bareki feela le liphekolo tse ikhethileng.
Ho isa tekanyong e lumelletsoeng ke molao oa lehae, ntle le boitlamo bo boletsoeng polelong ena ea tiisetso, ha ho ketsahalo e tla iPGARD kapa bafani ba eona ba mokha oa boraro ba tla ikarabella bakeng sa litšenyehelo tse tobileng, tse sa tobang, tse khethehileng, tsa tšohanyetso kapa tse ipapisitseng le konteraka. kapa khopolo efe kapa efe e 'ngoe ea molao le hore na ba eletsoe ka monyetla oa tšenyo e joalo.
D. Molao oa lehae
Ho isa moo polelo ena ea tiisetso e sa lumellaneng le molao oa lehae, polelo ena ea tiisetso e tla nkoa e fetotsoe hore e lumellane le molao o joalo.
TSEBISO
Lintlha tse teng tokomaneng ena li ka fetoha ntle le tsebiso. iPGARD ha e fane ka tiisetso ea mofuta ofe kapa ofe mabapi le thepa ena, ho kenyeletsoa, empa ha e felle feela, litiisetso tse boletsoeng tsa thekiso le ho itekanela molemong o itseng. iPGARD e ke ke ea jara boikarabello bakeng sa liphoso tse teng mona kapa ts'enyehelo ea tšohanyetso kapa ea litlamorao mabapi le phano, ts'ebetso kapa ts'ebeliso ea thepa ena. Ha ho karolo ea tokomane ena e ka kopitsoang, ea etsoa hape, kapa ea fetoleloa puong e 'ngoe ntle le tumello e ngotsoeng pele ho iPGARD, Inc.
20180109
Mahala: 888-994-7427
Mohala: 702-800-0005
Fax: 702-441-5590
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
iPGARD.COM
E tsoetseng pele 2/4/8-Port DisplayPort Sireletsehile KVM Switch
Litokomane / Lisebelisoa
 |
iPGARD SDVN-8D Advanced 2-4-8-Port DisplayPort Sireletsehile KVM Switch [pdf] Bukana ea Mosebelisi SDVN-8D Advanced 2-4-8-Port DisplayPort Sireletsehile KVM Switch, SDVN-8D, Advanced 2-4-8-Port DisplayPort Sireletsehile KVM Switch, 2-4-8-Port DisplayPort Secure KVM Switch, DisplayPort Secure KVM Switch, Sireletsa KVM switjha, KVM switjha, switjha |
