iPGARD SA-DPN-2S Advanced 2-4-8-Port DisplayPort Sireletsa KVM Switch

E tsoetseng pele 2/4/8-Port DisplayPort Sireletsehile KVM Switch

MOEKETSI MOSEBETSI

SA-DPN-2S	2-Port Secure Single-Head DisplayPort KVM e nang le Audio
SA-DPN-2D	2-Port Secure Dual-Head DisplayPort KVM e nang le Audio
SA-DPN-2S-P	2-Port Secure Single-Head DisplayPort KVM e nang le Audio le CAC Support
SA-DPN-2D-P	2-Port Secure Dual-Head DisplayPort KVM e nang le Tšehetso ea Audio le CAC
SA-DPN-4S	4-Port Secure Single-Head DisplayPort KVM e nang le Audio
SA-DPN-4D	4-Port Secure Dual-Head DisplayPort KVM e nang le Audio
SA-DPN-4S-P	4-Port Secure Single-Head DisplayPort KVM e nang le Audio le CAC Support
SA-DPN-4D-P	4-Port Secure Dual-Head DisplayPort KVM e nang le Tšehetso ea Audio le CAC
SA-DPN-4Q-P	4-Port Secure Quad-Head DisplayPort KVM e nang le Audio le CAC Support
SA-DPN-8S	8-Port Secure Single-Head DisplayPort KVM e nang le Audio
SA-DPN-8D	8-Port Secure Dual-Head DisplayPort KVM e nang le Audio
SA-DPN-8S -P	8-Port Secure Single-Head DisplayPort KVM e nang le Audio le CAC Support
SA-DPN-8D-P	8-Port Secure Dual-Head DisplayPort KVM e nang le Tšehetso ea Audio le CAC

LIEKETSENG MOKHOPO

VIDEO
Sebopeho	DisplayPort
Sebaka sa Phallo	SA-DPN-2S / SA-DPN-2S-P	(2) DisplayPort 20-pin (basali)
	SA-DPN-2D / SA-DPN-2D-P / SA-DPN-4S / SA-DPN-4S-P	(4) DisplayPort 20-pin (basali)
	SA-DPN-4D / SA-DPN-4D-P / SA-DPN-8S / SA-DPN-8S-P	(8) DisplayPort 20-pin (basali)
	SA-DPN-4Q-P / SA-DPN-8D / SA-DPN-8D-P	(16) DisplayPort 20-pin (basali)
User Console Interface	SA-DPN-2S / SA-DPN-2S-P / SA-DPN-4S / SA-DPN-4S-P / SA-DPN-8S / SA-DPN-8S-P	(1) DisplayPort 20-pin (basali)
	SA-DPN-2D / SA-DPN-2D-P / SA-DPN-4D / SA-DPN-4D-P / SA-DPN-8D / SA-DPN-8D-P	(2) DisplayPort 20-pin (basali)
	SA-DPN-4Q-P	(4) DisplayPort 20-pin (basali)
Qeto ea Max	3840×2160 @ 60Hz
DDC	5 volts pp (TTL)
Kenyeletso ya Tekatekano	Ka ho iketsa
Kena Bolelele ba Cable	Ho fihla ho 20 ft.
Khumo Bolelele ba Cable	Ho fihla ho 20 ft.
USB
Mofuta oa Letšoao	USB 1.1 le 1.0 Keyboard le Mouse feela. USB 2.0 bakeng sa khokahano ea CAC.
Sesebelisoa sa ho Kenyelletsa	SA-DPN-2S / SA-DPN-2D		(2)
	SA-DPN-2S-P / SA-DPN-2D-P / SA-DPN-4S / SA-DPN-4D		(4)
	SA-DPN-4S-P / SA-DPN-4D-P / SA-DPN-4Q-P / SA-DPN-8S / SA-DPN-8D		(8)
	SA-DPN-8S-P / SA-DPN-8D-P		(16)
Sebopeho sa Output	(2) USB Type-A bakeng sa khokahano ea keyboard le mouse feela
	(1) USB Type-A bakeng sa khokahanyo ea CAC (mefuta ea P feela)
MUDIO
Sesebelisoa sa ho Kenyelletsa	(2)/(4)/(8) Sehokedi Stereo 3.5mm Mosadi
Sebopeho sa Output	(1) Sehokelo Stereo 3.5mm E Motšehali
MATLA
Litlhoko tsa Matla	12V DC, 3A (bonyane) adaptara ea matla e nang le polarity e ntle ea pini e bohareng.
TIKOLOHO
Mocheso oa Ts'ebetso	32° ho isa ho 104° F (0° ho isa ho 40° C)
Mocheso oa polokelo	-4° ho isa ho 140° F (-20° ho isa ho 60° C)
Mongobo	0-80% RH, e sa fokotseng
MATS'ELISO
Kamohelo ea Tšireletso	Mekhoa e Tloaelehileng e Tiisitsoe ho NIAP, Protect Profile PSS Ver. 4.0
TSE LING
Emulation	USB 1.1 le USB 2.0 e tsamaellana
Taolo	Likonopo tsa Front Panel

KE ENG E KA LEKOSONG?

Sehlopha sa SA-DPN	2/4/8-port Sireletsehile DisplayPort KVM Switch
PS12VDC3A	12V DC, 3A (bonyane) adaptara ea matla e nang le polarity e ntle ea pini e bohareng.
Bukana ea Mosebelisi

TS'IRELETSO MAKHABANE

Khahlano le Tamper Liphetoho
Mohlala o mong le o mong o na le Anti-T ea kahareamper switches, e leng ntho e lekang ho bula sebaka se kampetsoeng sa sesebelisoa. Hang ha sistimi e tsebahatsa teko e joalo, li-LED tsohle tse ka pele li tla benya ka potlako, li-buzzers tsa kahare li tla lla, 'me yuniti e tla hloka thuso ka ho koala khokahano le li-PC tsohle tse hokelletsoeng le lisebelisoa tse sitisang ts'ebetso efe kapa efe.

Tamper-Evident Tiiso
Sebaka se kampetsoeng sa yuniti se sirelelitsoe ka hoamper-evident seal ho fana ka bopaki ba pono haeba yuniti e butsoe.

Firmware e sirelelitsoeng
Molaoli oa yuniti o na le ts'ireletso e khethehileng e thibelang ho hlophisa bocha kapa ho bala firmware.

Ho itšehla thajana ho Holimo Likanaleng tsa USB
Li-Opto-isolator li sebelisoa yuniti ho boloka litsela tsa data tsa USB li arohane ka motlakase ho tse ling, li fana ka karohano e phahameng le ho thibela ho lutla ha data lipakeng tsa likou.

Sireletsa EDID Emulation
Yuniti e thibela data e sa batleheng le e sa sireletsehang hore e fetisoe ka mela ea DDC ka mokhoa o sireletsehileng oa ho ithuta le ho etsisa EDID.

Boiketsi ba ho itlhatlhoba
Ho itlhahloba ho etsoa nako le nako ha KVM e tsamaisoa e le karolo ea tatellano ea eona ea ho qala. Haeba KVM e qala ka nepo mme e sebetsa, ho itlhahloba ho fetile. Leha ho le joalo, haeba li-Front Panel LED li butse 'me li sa benye, ho itlhahloba ho hloleha ho sebetsa 'me mesebetsi eohle e koetsoe. Lekola hore na ho na le likonopo life kapa life tsa khetho ea boema-kepe ba ka pele li petelitsoeng. Tabeng ena, lokolla konopo e koetsoeng 'me u sebelise matla hape.

KEKETSO

TSAMAISO LIHLOKO

1. sheba Sireletsehile PSS e lumellana le likhomphutha tse tloaelehileng tsa motho / tse nkehang, li-server kapa bareki ba basesaane, ba tsamaisang lits'ebetso tse joalo ka Windows kapa
2. Lisebelisoa tsa peripheral tse tšehetsoeng ke KVM li thathamisitsoe tafoleng e latelang:

Kou ea Console	Lisebelisoa tse lumelletsoeng
Keyboard	Khiboto e nang le mehala le letlapa la likonopo ntle le hub ea kahare ea USB kapa lisebelisoa tse kopaneng tsa lisebelisoa, ntle le haeba sesebelisoa se hoketsoeng se na le bonyane ntlha e le 'ngoe e leng sehlopha sa keyboard kapa mouse sa HID.
Pontšo	Sesebediswa sa ho bontsha (mohlala, monitor, projector) se sebedisang sehokelo se tsamaellanang le boemakepe ba TOE (DisplayPort).
Audio tsoa	Analoge ampLibui tse hloekisitsoeng, li-headphone tsa Analog.
Tweba/Sesebediswa sa ho supa	Penya efe kapa efe e nang le wired kapa trackball ntle le hub ea kahare ea USB kapa lisebelisoa tse kopaneng tsa sesebelisoa.
Sesebediswa sa netefatso ya mosebedisi	Lisebelisoa tsa USB tse khethiloeng e le netefatso ea mosebelisi (sehlopha sa motheo sa 0Bh, mohlala Smart-card sebali, sebali sa PIV/CAC, Token, kapa sebali sa Biometric)*

* TOE -P mehlala feela Lethathamo la 5-1

Lihlopha tsa Motho a le Mong:

1. Etsa bonnete ba hore motlakase o tingoe kapa o khaotsoe ho yuniti le
2. Sebelisa thapo ea DisplayPort ho hokela boema-kepe ba tlhahiso ea DisplayPort ho tloha komporong e 'ngoe le e' ngoe ho ea likoung tse tsamaellanang tsa DisplayPort IN tsa yuniti.
3. Sebelisa thapo ea USB (Mofuta oa A ho ea ho Mofuta oa B) ho hokela kou ea USB komporong e 'ngoe le e 'ngoe ho likou tsa USB tsa yuniti.
4. Hokela thapo ya modumo ya stereo (3.5mm ho ya ho 5mm) ka boikgethelo ho hokela tlhahiso ya modumo ya dikhomphutha ho AUDIO IN boemakepe ba yuniti.
5. Hokela sebali ho koung ea khomphutha ea DisplayPort OUT ea yuniti u sebelisa DisplayPort
6. Hokela keyboard ea USB le mouse ho likhomphutha tse peli tsa USB
7. Hokela libui tsa stereo ka boikhethelo boema-kepe ba AUDIO OUT ea
8. Hokela CAC (COMMON ACCESS CARD, SMART CARD READER) ka boikhethelo boema-kepeng ba CAC ka har'a khokahanyo ea mosebelisi. Bakeng sa -P
9. Qetellong, kenya matla KVM ka ho hokela phepelo ea motlakase ea 12VDC ho sehokelo sa motlakase, ebe o bulela lisebelisoa tsohle.

Hlokomela: Khomphuta e hoketsoeng ho port 1 e tla lula e khethoa ka mokhoa oa kamehla kamora ho tima.

Hlokomela: O ka hokela ho fihlela ho 2 lik'homphieutha ho 2 koung KVM, ho fihlela ho 4 lik'homphieutha ho 4 koung KVM le 8 lik'homphieutha ho 8 koung KVM.

LITEMOSO TSA BOHLOKOA - Ka mabaka a ts'ireletso:

• Sehlahiswa sena ha se tshehetse waelese Se ke oa leka ho sebelisa keyboard e se nang mohala kapa toeba e se nang mohala ka sehlahisoa sena.
• Sehlahisoa sena ha se sebelise likonopo tse nang le li-hubs tsa USB tse kopaneng kapa likou tsa USB. Sebelisa feela likonopo tsa USB tse tloaelehileng (HID) ka sena
• Sehlahiswa sena ha se tshehetse ho kenya maekrofounu kapa ho kenya mohala. Se ke oa hokela li-microphone kapa li-headset le li-microphone ho sena
• Khokahano ea lisebelisoa tsa netefatso (CAC) le mehloli ea matla a kantle e

E tsoetseng pele 2/4/8-Port DisplayPort Sireletsehile KVM Switch

Mefuta e mengata ea Lihlooho:

1. Etsa bonnete ba hore motlakase o tingoe kapa o khaotsoe ho yuniti le
2. Sebelisa lithapo tsa DisplayPort ho hokela likou tse hlahisoang ke DisplayPort tsa komporo e 'ngoe le e 'ngoe ho likou tse tsamaellanang tsa DisplayPort IN tsa yuniti. Bakeng sa mohlalaample, haeba u sebelisa SA-DPN-4Q, likou tse 'ne tsa DisplayPort tsa komporo e le' ngoe li tlameha ho hokela e le 'ngoe 
   • Lihokelo tsa DisplayPort IN tseo e leng tsa kanale e le 'ngoe li hlophisoa ka ho otloloha.
3. Sebelisa thapo ea USB (Mofuta oa A ho ea ho Mofuta oa B) ho hokela kou ea USB khomphuteng ka 'ngoe ho likou tse fapaneng tsa USB tsa
4. Hokela thapo ea molumo ea stereo ka boikhethelo (3.5mm lipheletsong tse peli) ho hokela molumo oa khomphutha ho li-port tsa AUDIO IN tsa
5. Hokela li-monitor ho li-console tsa DisplayPort OUT tsa yuniti u sebelisa DisplayPort
   • Likou tsa DisplayPort IN moleng o le mong li tla fetisetsoa ho DisplayPort OUT ea mola o le mong.
6. Hokela keyboard ea USB le mouse ka har'a khomphutha tse peli tsa USB
7. Hokela libui tsa stereo ka boikhethelo boema-kepe ba AUDIO OUT ea
8. Hokela CAC (smart card reader) ka boikhethelo boema-kepeng ba CAC ho khomphutha ea mosebelisi
9. Matla ho KVM ka ho hokahanya phepelo ea motlakase ea 12VDC ho sehokelo sa matla, ebe o bulela likhomphutha tsohle.

Hlokomela: Khomphuta e hoketsoeng ho port 1 e tla lula e khethoa ka mokhoa oa kamehla kamora ho tima.

EDID Ithute:

Video ea kamehla ea feme ea EDID e behiloe ho HP (1080P max resolution) ho lumella ts'ebetso ea pele ka mefuta e mengata ea ponts'o ea DP. Bakeng sa mabaka a ts'ireletso, EDID e ithuta ka mefuta e mengata ea lipontšo tsa DP e ka finyelloa feela ke Mookameli ea Tiisitsoeng.

Sebelisa mehato e latelang ho theha thuto ea hau ea EDID hantle:

1. Netefatsa hore motlakase o khaotsoe kapa o tingoe ho yuniti le yuniti
2. U sebelisa thapo ea USB (Mofuta oa A ho ea ho Mofuta oa B), hokela PC ho K/M Port ea moamoheli oa KVM.
3. Hokela keyboard ea USB le mouse ho likhomphutha tse peli tsa USB
4. Hokela thapo ea video ea DP lipakeng tsa PC le Boema-kepe ba video ba DP ea moamoheli oa KVM
5. Hokela ponts'o ea DP ho tlhahiso ea DP ea khomphutha ea KVM
6. Matlafatsa PC le KVM
7. Khoasolla Sesebelisoa sa Tsamaiso le Ts'ireletso ea Ts'ireletso ho komporo ea hau ho tsoa sehokelong sena:b
8. Matha Sesebelisoa sa Tsamaiso le Ts'ireletso ea Ts'ireletso se ka phethisoang file

Qala lenaneo u sebelisa mehato e latelang ho Sesebelisoa sa Tsamaiso le Ts'ireletso ea Ts'ireletso: https://ipgard.com/tools-software/ 

1. Ngola "alt cnfg" ho keyboard ea hau
2. Toeba e hokahantsoeng le KVM e tla emisa ho sebetsa 'me u tla susumelletseha ho "kena id ea netefatso"
3. Kena joalo ka motsamaisi ka ho kenya lebitso la mosebelisi la kamehla "admin", ebe o tobetsa
4. Kenya phasewete ya kamehla “1 2 3 4 5” ebe o tobetsa
5. Likhetho tse supileng li tla hlaha lenaneng la linomoro: khetha khetho ea 6 ebe o tobetsa
6. Ho tla hlaha menu e o lebisang ho Khetha Mokhoa; ho e-na le hoo, tlanya "local" ebe o tobetsa

Sesebelisoa sa Tsamaiso le Ts'ireletso ea Ts'ireletso joale se tla ithuta le ho boloka EDID ea ponts'o, ebe sesebelisoa se tla qala bocha le ho qala bocha. Qetellong ea boot-up, etsa bonnete ba hore likhomphutha tsohle li hokahane le switch ea KVM ka har'a boema-kepe bo bong le bo bong ho netefatsa hore bohle ba hlahisa video hantle ponts'ong e hokahaneng.

Bakeng sa thuso e eketsehileng kapa tlhahisoleseding, ka kopo sheba ho IPGard Secure KVM EDID Configuration Guide e fumanehang ho www.ipgard.com/documentation.

KENYATSO EA CAC (CARETE EA TLOAELEHILENG, SEBALI SA SMART CARD).

Mehato e latelang e reretsoe mookameli oa tsamaiso kapa mookameli oa IT feela.

Haeba u na le likou tsa boikhethelo tsa CAC ho tla ba le likou tse 4 ho li-ports tse 4 tsa KVM.

Khokahano ea CAC komporong e hloka khokahano ea thapo ea USB e arohaneng le keyboard le mouse. Sena se lumella CAC hore e hokahane e ikemetse ho keyboard le mouse. E boetse e lumella mosebelisi ho khetha hore na CAC bakeng sa komporo e itseng e tšehelitsoe kapa che.

1. Etsa bonnete ba hore motlakase o tingoe kapa o khaotsoe ho yuniti le
2. Sebelisa thapo ea USB (Mofuta-A ho ea ho Mofuta-B) ho hokela kou ea USB komporong ho likoung tsa eona tsa CAC USB tse ho KVM. Se ke oa hokela thapo ea USB haeba tšebetso ea CAC e sa hlokehe bakeng sa komporo eo.
3. Hokela CAC (sebali sa karete e bohlale) koung ea CAC ho khomphutha ea mosebelisi
4. Matla ho KVM ka ho hokela phepelo ea motlakase ea 12VDC ho sehokelo sa motlakase, ebe o bulela lisebelisoa tsohle.
5. Ho tima CAC bakeng sa kanale efe kapa efe (likou tsohle tsa CAC li lumelletsoe joalo ka kamehla), sebelisa likonopo tse ka pele ho chencha KVM ho seteishene seo mokhoa oa CAC o lakatsang ho se fetola. Hang ha mocha o khethiloe, konopo ea LED bakeng sa mocha ona o khethehileng o lokela ho buloa (CAC port e lumelletsoe). Tobetsa 'me u tšoare konopo bakeng sa metsotsoana e 3 ho fihlela konopo ea LED e tima. Boema-kepe ba CAC bo se bo holofetse bakeng sa sena
6. Ho nolofalletsa CAC bakeng sa mocha ofe kapa ofe, sebelisa likonopo tsa phanele e ka pele ho chencha KVM ho seteishene seo mokhoa oa CAC o batlang ho se fetola. Hang ha seteishene se khethiloe, konopo ea LED bakeng sa mocha ona o khethehileng o lokela ho tima (CAC port e holofetse). Tobetsa 'me u tšoare konopo bakeng sa metsotsoana e 3 ho fihlela konopo ea LED e bulela. Boema-kepe ba CAC bo se bo lumelletsoe mocha ona. Seboka se sebetsang komporong se emisoa ha CAC e tlosoa

Hlokomela: Seboka se bulehileng se tla felisoa hang hang ha ho tlosoa sesebelisoa sa CAC se ngolisitsoeng.

TS'ELISO CAC KOU

Mehato e latelang e reretsoe mookameli oa tsamaiso le basebetsi (basebedisi). Tlhokomeliso: Ke komporo e le 'ngoe feela e hoketsoeng ho port 1 e hlokahalang bakeng sa ts'ebetso ena CAC port Configuration ke karolo ea boikhethelo, e lumellang ngoliso ea peripheral efe kapa efe ea USB ho sebetsa le KVM. Ke pheriferale e le 'ngoe feela e ka ngolisoang mme ke pheriferale e ngolisitsoeng feela e tla sebetsa le KVM. Ka mokhoa o ikhethileng, ha ho se na peripheral e ngolisitsoeng, KVM e tla sebetsa le Smart Card Reader efe kapa efe.

Lokisa Boema-kepe ba CAC ka Likhetho tsa Menu ea Basebelisi

1. Bula Tsamaiso ea Tsamaiso le Tšireletso
2. U sebelisa keyboard, tobetsa konopo ea Alt habeli ebe u ngola "cnfg".
3. Ho sena stage, toeba e hokahantsoeng le KVM e tla emisa
4. Kenya lebitso la mosebelisi la kamehla "user" ebe o tobetsa
5. Kenya password ea kamehla "12345" ebe o tobetsa
6. Khetha khetho ea 2 ho tsoa ho menu e skrineng sa hau ebe o tobetsa
7. Hokela sesebelisoa sa peripheral hore se ngolisoe boema-kepeng ba CAC USB ka lehlakoreng la khomphutha ea KVM 'me u eme ho fihlela KVM e bala lintlha tse ncha tsa peripheral.
8. KVM e tla thathamisa tlhahisoleseling ea peripheral e hokahantsoeng skrineng le ho buzz makhetlo a 3 ha ngoliso e felile.

TLHOKOMELISO: Ho lahla Log ea Ketsahalo ka Likhetho tsa Menu ea Basebelisi

Mehato e latelang e reretsoe mookameli oa tsamaiso.

Hlokomela: Ke komporo e le 'ngoe feela e hoketsoeng ho port 1 e hlokahalang bakeng sa ts'ebetso ena

Lethathamo la Ketsahalo ke tlaleho e qaqileng ea mesebetsi ea bohlokoa e bolokiloeng mohopolong oa KVM. Lenane le felletseng la likarolo le tataiso bakeng sa Lisebelisoa tsa Tsamaiso le Ts'ireletso li ka fumanoa ho Tataiso ea Tsamaiso e fumanehang bakeng sa ho khoasolla ho tsoa ho: http://ipgard.com/documentation/

Ho view kapa u lahle Lethathamo la Ketsahalo:

1. Bula Lenaneo la Tsamaiso le Ts'ireletso ea Ts'ireletso
2. U sebelisa keyboard, tobetsa konopo ea Alt habeli ebe u ngola "cnfg".
3. Kenya lebitso la kamehla la admin "admin" ebe o tobetsa
4. Kenya password ea kamehla "12345" ebe o tobetsa
5. Kopa ho Lahlela Litlaleho ka ho khetha khetho ea 5 ho menu. (E bontšitsoe setšoantšong sa 11-1)

Sheba Tataiso ea Lisebelisoa tsa Tsamaiso le Tšireletso bakeng sa lintlha tse qaqileng

RESET: Khutlisa Li-Defactory tsa Feme

Mehato e latelang e reretsoe mookameli oa tsamaiso.

Hlokomela: Ke komporo e le 'ngoe feela e hoketsoeng ho port 1 e hlokahalang bakeng sa ts'ebetso ena Khutlisa Li-Defactory tsa Fektheri li tla hlophisa litlhophiso tsohle ho KVM ho ea boemong ba tsona ba pele ba ngoliso ea boema-kepe ba CAC e tla tlosoa

Ho Khutlisa Li-Defactors tsa Feme ka Likhetho tsa Menu ea Basebelisi:

1. Bula Lenaneo la Tsamaiso le Ts'ireletso ea Ts'ireletso
2. U sebelisa keyboard, tobetsa konopo ea Alt habeli ebe u ngola "cnfg"
3. Kenya lebitso la kamehla la admin "admin" ebe o tobetsa
4. Kenya password ea kamehla "12345" ebe o tobetsa
5. Khetha khetho ea 7 ho tsoa ho menu e skrineng sa hau ebe o tobetsa (Menu e bonts'itsoeng ho Setšoantšo sa 12-1)

Sheba Tataiso ea Lisebelisoa tsa Tsamaiso le Tšireletso bakeng sa lintlha tse qaqileng

TŠEBELETSO EA LED

Sebopeho sa Console ea mosebelisi - Bontša LED:

#	Boemo	Tlhaloso
1	E tima	Monitor ha e ea hokahanngoa
2	On	Monitor e hokahane
3	Ho benya	Bothata ba EDID - Ithute EDID ho lokisa bothata

Sebopeho sa Consolese ea mosebelisi - CAC LED:

#	Boemo	Tlhaloso
1	E tima	CAC ha e hokahane
2	On	CAC e lumelletsoeng le e sebetsang e hokahane
3	Ho benya	Pheriferale e seng ea CAC e hokahane

Front Panel - Port Selection LED's:

#	Boemo	Tlhaloso
1	E tima	Boema-kepe bo sa khethoang
2	On	Kou e khethiloeng
3	Ho benya	Thuto ea EDID e ntse e tsoela pele

Front Panel - CAC Selection LED's:

#	Boemo	Tlhaloso
1	E tima	Boema-kepe ba CAC bo koetsoe kapa boema-kepe bo sa khethoang
2	On	Boema-kepe ba CAC bo lumelletsoe
3	Ho benya	Thuto ea EDID e ntse e tsoela pele

Front Panel - Port le CAC Selection LED's:

#	Boemo	Tlhaloso
1	Tsohle tse Flashing	Sebaka se hoketsoeng ho keyboard kapa likou tsa mouse se hanngoe

BOHLOKOA!

Haeba li-LED tsohle tsa Front Panel li ho benya le buzzer ke ho lla, KVM e bile TAMPERED ka le lits'ebetso tsohle li holofalitsoe ka ho sa feleng. Ka kopo ikopanye le thuso ea tekheniki ea iPGARD ho support@iPGARD.com.

Haeba li-LED tsohle tsa Front Panel li butse e sa kganyang, POWER UP SELF TEST e hlōlehile 'me mesebetsi eohle e tiisitsoe. Lekola hore na ho na le likonopo life kapa life tsa khetho ea boema-kepe ba ka pele li petelitsoeng. Tabeng ena, lokolla konopo e koetsoeng 'me u sebelise matla hape. Haeba power up self test e ntse e le teng ha e hlolehe, ka kopo ikopanye le tšehetso ea tekheniki ea iPGARD ho support@iPGARD.com.

EDID Ithute - Front Panel LED's:

Li-LED tsohle li buletsoe motsotsoana o le mong. Joale:

• Li-LED tsa Port 1 li tla benya ho fihlela qetellong ea
• Li-LED tsa Port 2 li tla khanya ho fihlela qetellong ea ts'ebetso haeba boto ea bobeli ea video e le teng (Dual-head KVM)
• Li-LED tsa Port 3 li tla khanya ho fihlela qetellong ea ts'ebetso haeba boto ea boraro ea video e le teng (Quad-head KVM)
• Li-LED tsa Port 4 li tla khanya ho fihlela qetellong ea ts'ebetso haeba boto ea bone ea video e le teng (Quad-head KVM)

Front Panel Control

Ho fetohela boema-kepeng ba ho kenya, tobetsa feela konopo ea ho kenya eo u e batlang karolong e ka pele ea KVM. Haeba sebaka sa ho kenya se khethiloe, LED ea kou eo e tla bulela. Lenaneo le bulehileng le emisoa ha o fetohela komporong e 'ngoe.

HO BATLE PHOSO

Ha ho Matla

• Etsa bonnete ba hore adaptara ea matla e hokahane ka mokhoa o sireletsehileng ho sehokelo sa matla sa
• Sheba bophahamo ba modumotage ea phepelo ea motlakase le ho etsa bonnete ba hore voltagboleng ba e ke hoo e ka bang 12VDC.
• Fetola matla

Ha ho Video

• Sheba hore na lithapo tsohle tsa video li hokahane
• Hokela komporo ka kotloloho ho sebali ho netefatsa hore sebali le komporo ea hau lia sebetsa
• Restart the

Keyboard ha e sebetse

• Sheba hore na keyboard e hokahane hantle le
• Sheba hore na lithapo tsa USB tse hokahanyang yuniti le likhomphutha li nepahetse
• Leka ho hokela USB komporong e fapaneng
• Etsa bonnete ba hore keyboard e sebetsa ha e hokahane ka kotloloho ho
• Tlosa keyboard.

Hlokomela: Lipontšo tsa LED tsa NUM, CAPS, le SCROLL Lock tse lebokoseng ha lia lokela ho khantša haeba li hokahane le KVM.

Toeba ha e sebetse

• Sheba hore na mouse e hokahane hantle le faele
• Leka ho hokela USB komporong e fapaneng
• Etsa bonnete ba hore mouse e sebetsa ha e hokahane ka ho toba le
• Tlosa mouse.

Ha ho Audio

• Sheba hore na lithapo tsohle tsa molumo li hokahane
• Hokela libui ka kotloloho khomphuteng ho netefatsa hore libui le molumo oa khomphutha lia sebetsa
• Lekola litlhophiso tsa molumo komporong 'me u netefatse hore tlhahiso ea molumo e tsoa ka libui.

Ha ho CAC (COMMON ACCESS CARD, SMART CARD READER)

• Sheba hore na lithapo tsa USB tse hokahanyang yuniti le likhomphutha li nepahetse
• Etsa bonnete ba hore boema-kepe ba CAC bo

TŠEHETSO EA TEKHENIKI

Bakeng sa lipotso mabapi le sehlahisoa, lipotso tsa tiisetso, kapa lipotso tsa tekheniki, ka kopo ikopanye info@iPGARD.com.

Boemo ba tiisetso e lekanyelitsoeng

iPGARD, Inc. e fana ka tiisetso ho bareki ba ho qetela hore sehlahisoa sa iPGARD se boletsoeng ka holimo se ke ke sa ba le mathata a thepa le moetso oa nako ea selemo se le seng, e leng nako e qalang ka letsatsi leo moreki a se rekileng. Moreki o ikarabella ho boloka bopaki ba letsatsi leo a rekileng ka lona.

Tiisetso e lekanyelitsoeng e akaretsa feela liphoso tse hlahang ka lebaka la tšebeliso e tloaelehileng ea sehlahisoa, 'me ha e sebetse ho efe kapa efe:

1. Tlhokomelo e sa lokang kapa e sa lekaneng kapa diphetoho
2. Ts'ebetso e kantle ho litekanyetso tsa sehlahisoa
3. Tlhekefetso ea mechine le ho pepesehela maemo a matla

Haeba iPGARD e amohela, nakong ea tiisetso e sebetsang, tsebiso ea bofokoli, iPGARD e tla ka boikhethelo ba eona ho nkela sebaka kapa ho lokisa sehlahisoa se senyehileng. Haeba iPGARD e sa khone ho khutlisa kapa ho lokisa sehlahisoa se senyehileng se koahetsoeng ke tiisetso ea iPGARD ka nako e loketseng, iPGARD e tla khutlisa litšenyehelo tsa sehlahisoa. iPGARD ha e na tlameho ea ho lokisa, ho khutlisa kapa ho khutlisa yuniti ho fihlela moreki a khutlisetsa sehlahisoa se nang le bothata ho iPGARD. Sehlahisoa sefe kapa sefe se ka nkelang sebaka se secha kapa sa tšoana le se secha, ha feela se na le tšebetso e lekanang le ea sehlahisoa se nkeloang sebaka. tiisetso e fokolang ea iPGARD e sebetsa naheng efe kapa efe moo sehlahisoa se koahetsoeng se ajoang ke iPGARD.

 Meeli ea tiisetso

Ho isa tekanyong e lumelletsoeng ke molao oa lehae, iPGARD kapa bafani ba eona ha ba fane ka tiisetso kapa maemo a mofuta ofe kapa ofe ho sa tsotellehe hore na o hlahisoa kapa o boleloa mabapi le sehlahisoa sa iPGARD, 'me ka ho khetheha ba hana litiisetso kapa maemo a thekiso, boleng bo khotsofatsang le ho phela hantle. ka sepheo se itseng.

Meeli ea boikarabello

Ho ea moo molao oa lehae o lumellang litlhare tse fanoeng setatementeng sena sa tiisetso ke bareki feela le liphekolo tse ikhethileng. Ho isa tekanyong e lumelletsoeng ke molao oa lehae, ntle le boitlamo bo boletsoeng polelong ena ea tiisetso, ha ho ketsahalo e tla iPGARD kapa bafani ba eona ba mokha oa boraro ba tla ikarabella bakeng sa litšenyehelo tse tobileng, tse sa tobang, tse khethehileng, tsa tšohanyetso kapa tse ipapisitseng le konteraka. kapa khopolo-taba efe kapa efe e 'ngoe ea molao le hore na ba eletsoe ka monyetla oa tšenyo e joalo.

Molao oa lehae

Ho isa moo polelo ena ea tiisetso e sa lumellaneng le molao oa lehae, polelo ena ea tiisetso e tla nkuoa e fetotsoe hore e lumellane le molao o joalo.

TSEBISO:  Lintlha tse teng tokomaneng ena li ka fetoha ntle le tsebiso. iPGARD ha e fane ka tiisetso ea mofuta ofe kapa ofe mabapi le thepa ena, ho kenyeletsoa, ​​​​empa ha e felle feela, litiisetso tse boletsoeng tsa thekiso le ho itekanela molemong o itseng. iPGARD e ke ke ea jara boikarabello bakeng sa liphoso tse teng mona kapa ts'enyehelo ea tšohanyetso kapa ea litlamorao mabapi le phano, ts'ebetso kapa ts'ebeliso ea thepa ena. Ha ho karolo ea tokomane ena e ka kopitsoang, ea etsoa hape, kapa ea fetoleloa puong e 'ngoe ntle le tumello e ngotsoeng pele ho iPGARD, Inc.

E ENTSOE LE HO ETSOA USA

Mahala: 888-994-7427

• Mohala: 702-800-0005
• Fax: 702-441-5590

2455 W Cheyenne Ave, Suite 112 Las Vegas, NV 89032

iPGARD.COM

Litokomane / Lisebelisoa

iPGARD SA-DPN-2S Advanced 2-4-8-Port DisplayPort Sireletsa KVM Switch [pdf] Bukana ea Mosebelisi SA-DPN-2S Advanced 2-4-8-Port DisplayPort Sireletsehile KVM Switch, SA-DPN-2S, Advanced 2-4-8-Port DisplayPort Sireletsehile KVM Switch, 2-4-8-Port DisplayPort Secure KVM Switch, DisplayPort Phetoho e sireletsehileng ea KVM, Phetoho e Sireletsehileng ea KVM, Phetoho ea KVM, Fetola

Litšupiso

• Bukana ea Mosebelisi