Sensor sa Interface 3AR
Litlhaloso tsa Sehlahisoa
- Lebitso la Sehlahisoa: 3AR Sensor
- Moetsi: Interface
- Libaka tse Hloahloa: Sethala sa ho lekanya (lehlakore le tsamaeang) le Stator
- Ho fastening: Li-cylinder head screws le li-cylindrical pins
- Screw Diameter: M20
- Torque e matlafatsang:
- Sethala sa ho lekanya: 8.8 / 400Nm, 10.9 / 550Nm, 12.9 / 700Nm
- Stator: 8.8 / 400Nm, 10.9 / 550Nm, 12.9 / 700Nm
- Litlhoko tsa Mounting Surface:
- Boima bo phahameng bo se nang deformation tlas'a mojaro
- Bophahamo: 0.05 ho 0.1mm
- Boleng ba Sefahleho: Rz6.3
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho Lekanya Platform Mounting:
Setupo sa ho lekanya se tlameha ho hokelloa holim'a sethala sa ho lekanya sa sensor ea 3AR ho sebelisoa li-cylinder head screws le li-cylindrical pins.
Mehato:
- Netefatsa hore sebaka sa ho hlongoa se fihlela litlhoko tse boletsoeng.
- Sebelisa bophara ba screw e nepahetseng le torque e tiisang ho latela tafole.
- Tiisa setup ka lisekurufu tsa hlooho tsa 8x cylinder 'me u be boemong ba 2x cylindrical pins.
Ho phahamisa Stator:
Sensor ea 3AR e tlameha ho hokelloa holim'a screwing ea stator ho latela litataiso tse fanoeng.
Mehato:
- Lokisetsa sebaka sa stator ho netefatsa hore se finyella litlhoko tse boletsoeng.
- Sebelisa li-screw tse khothalelitsoeng, masoba a phini, le li-torque tse tiisang joalo ka ha ho boletsoe bukeng ea tataiso.
- Sireletsa sensor ka li-screw tsa 8x tsa hlooho 'me u ikamahanye ka lithapo tsa 2x cylindrical.
Lintlha ka kakaretso:
- Kamehla sheba tafole e fanoeng bakeng sa sehlopha sa matla le tlhaiso-leseling ea torque.
- Netefatsa botebo bo nepahetseng ba skrufu sethaleng sa ho metha le stator.
- Latela litekanyetso tsa ISO bakeng sa mamello le ho qeta holimo.
Lipotso Tse Botsoang Hangata
- P: A na nka sebelisa li-screws tse fapaneng bakeng sa ho kenya sensor?
A: Ho khothaletsoa ho sebelisa li-cylinder head screws bakeng sa ho hlongoa ho etsa bonnete ba ho kenya ts'ebetso e nepahetseng. - P: Ke lokela ho etsa eng haeba sebaka se ntseng se phahama se sa kopane le litlhoko tse boletsoeng?
K: Ho bohlokoa ho ba le sebaka se tiileng le se bataletseng. Haeba e sa finyelle litlhoko, buisana le setsebi ho lokisa bokaholimo pele ho kenya. - P: Na hoa hlokahala ho sebelisa li-screw tsohle tse 8 bakeng sa ho tiisa?
A: E, ho bohlokoa ho sebelisa li-screw tsohle tse 8 tsa hlooho bakeng sa sehokelo se sireletsehileng sa sensor libakeng tse ntseng li hola.
Kemiso ea 3AR:
Ka kopo ela hloko litaelo tse latelang tsa ho kenya lihlahisoa tsa 3AR ho tsoa ho Interface. Bakeng sa ts'ebetso ea setsebi, sensor ea 3AR e tlameha ho hokelloa libakeng tse khethehileng tse tšoailoeng.
Sethala sa ho lekanya bokaholimo
Mount surface stator
Litlhoko tsa holimo tse ntseng li eketseha
- boima bo phahameng ba sefahleho sa screwing, ha ho na deformation tlas'a mojaro
- Bophahamo ba sebaka sa screwing 0.05 ho 0.1mm
- Boleng ba bokaholimo ba bokaholimo ba screwing Rz6.3
| Nomoro | Khethollo | Strength class/ Sethala se tiisang matla (Nm) Sethala sa ho metha | Strength class/ Ho tiisa torque (Nm) Stator |
| 8 | Sekoahelo sa hlooho ea cylinder DIN EN ISO 4762 M20 | 8.8 / 400Nm 10.9 / 550Nm 12.9 / 700Nm |
8.8 / 400Nm 10.9 / 550Nm 12.9 / 700Nm |
| 2 | Lithakhisa tsa Cylinder DIN6325 Ø12m6 |
 |
Standard ISO 128  |
Mamello e akaretsang ISO 2768- |
Sheba tsebiso ea ts'ireletso ea ISO 16016 | |
| Qetello ea bokaholimo DIN EN ISO 1302  |
Setšoantšo sena sa 2D se bohlokoa bakeng sa tlhahiso le kopano. E 'ngoe file lifomete (mohlala, Mohato le Dxf) ke tsa lintlha tse ling feela. | |||
| Khoele countersinking DIN 76 under 90° to 120° ho fihlela Thread outer diameter |
Interface, Inc. • 7418 East Helm Drive • Scottsdale, Arizona 85260 USA
Mohala: 480.948.5555
Fax: 480.948.1924
www.interfaceforce.com
Litokomane / Lisebelisoa
 |
Sensor sa Interface 3AR [pdf] Litaelo Sensor ea 3AR, 3AR, Sensor |
