HWDP IP66 IK08 Sephetho se Phahameng
Buka ea Tataiso
Mohala Voltage Microwave Bi-level Sensor BRI810-BD taeo
LIEKETSENG TS'OANELO
| Phepelo ea motlakase | 120/277VAC 50/60Hz | ||
| Boholo ba mojaro © -40°F – +158°F (-40°C – +70°C) |
Ho hanyetsa / Tungsten - 600Wat120V Ballast ea Electronic (LED) - 800VA©120V/1200VA©277V |
||
| Sistimi ea HF | 5.8GHz CW | ||
| Sekoahelo sa taolo e lefifi | 0-10y. max. 25mA; Mina ea hona joale | ||
| Ho lemoha radius/angle | Boholo ba 266.(8m) /360° | ||
| Bophahamo ba ho palama | Boholo ba 12ft | ||
| Mongobo | Max. 95% RH | ||
| Mocheso | -40°F – +158°F (-40°C – +70°C) | ||
HLOKOMELA: Tlhahiso ea hilil-frecluency ea sensor ena ke <0. 2mW-e leng 5000 e le 'ngoe feela ea matla a phetiso ea mohala oa thekeng kapa tlhahiso ea microwave.
TS'ELISO TS'ELISO
Hang ha e matlafatsa sesebelisoa, BRI81-BD e tla sebelisa li-parameter tsa feme ho sebetsa
TLHOKOMELO
HLOKOMELA: Nako ea ho futhumatsa ke metsotsoana e 15. Kamora hore sensor e hokahane le matla a kenang ka lekhetlo la pele. leseli le tla lula ka metsotsoana e 15. ebe u ea ho fifala ho sebetsa ka mokhoa o tloaelehileng.
HLOKOMELA: Tlhophiso e Ikemetseng ea Feme: 100% kutlo, Mena ka nako: hoOseconds, Sensor ea Motšehare Ke 30Ita. Lebelo la ho fifala1:30%.Nako ea ho fifala: metsotso e 60.
HLOKOMELA: Boemo bofe kapa bofe bo fetotsoe ke DIP Switch kapa remote control. lebone le etelletsoeng pele leo sensor e hokahanyang le tla tima / tima joalo ka ha ho netefatsoa.
SEBELISA LEBARA LE SELELEKELA
BRI810-BD ke sensor ea ntho e tsamaeang e khonang ho lemoha mefuta e fapaneng ea 360 ° 'me e sebetsa ka makhetlo a 5GHz. Advantage ea sehlahisoa sena ke boemo bo tsitsitseng ba ho sebetsa (mocheso o tsitsitseng oa ho sebetsa: -40 ° C-+ 70 ° C), BRI810-13 e amohela mochine oa microwave (high-frequency output <0.2mW), e le hore e bolokehe 'me e sebetse hantle ho feta sensor ea infrared.
MOSEBETSI LE MAKHETHA
Sensor ea microwave ho fihlela taolo ea ho fifala ha maemo a mararo, bakeng sa libaka tse tšoanang tse hlokang tsebiso ea phetoho e bobebe pele e tima.
Haeba ho fanoa ka maemo a 3 a lebone Taolo : 100% -lebone le nyenyefatsang (0,10%,30%,50%) -hangata linako tse 2 tsa nako ea ho leta e khethiloeng: nako ea ho ts'oara le nako ea ho ema. Khetho ea sebaka sa khanya ea letsatsi le khetho ea sebaka sa ho lemoha.
Ka khanya e lekaneng ea tlhaho, tight ha e tuke ha boteng bo bonoa.
Ka khanya e sa lekaneng ea tlhaho, sensor e fetoha ntoa ka bo eona ha motho a kena ka phapusing.
Batho ba tsamaile, leseli le ntse le fifala ho isa ho 0%130%150% (likhetho) boemong ba standby kamora nako ea ho ts'oara.
Leseli le itima ka bo eona ka mor'a hore nako ea ho ema ka nako e fete.
LIEKETSENG MAKHOPO
Wiring e nang le dimming ballast kapa mokhanni oa LED.
Wiring e nang le ballast e se nang dimming kapa mokhanni oa LED.
TLHOKOMELISO EA PARAMETER BY DIP SWITCH
Nahana ka setšoantšo: 1, 2 set sensitivity; 3, 4 beha nako ea ho tšoara; 5, 6 beha mabothobotho; 7, 8 boemo ba leseli le emeng; 9, 10 beha nako ea ho ema-ka;
Tlhophiso ea Range Setting (sensitivity)
Sebaka sa ho lemoha ke lentsoe le sebelisetsoang ho hlalosa radii ea sebaka sa ho lemoha se chitja se batlang se le selikalikoe se hlahisoang fatše ka mor'a ho phahamisa leseli la sensor ka bolelele ba 8-20ft. hula switjha ho ON boemo e le “↑, hula switch ho ea sebakeng sa OFF joalo ka -↓ °, switjha sebaka le sebaka sa ho sibolla sa tafole e tsamaellanang ka tsela e latelang:
Tšoara Nako Setting
Leseli le ka behoa hore le lule le ON ka nako leha e le efe pakeng tsa approx.10sec le boholo ba 15min. Motsamao ofe kapa ofe o fumanweng pele nako ena e feta o tla qala sebali hape. Ho kgothaletswa ho khetha nako e khutšoanyane ea ho lokisa sebaka sa ho lemoha le ho etsa tlhahlobo ea ho tsamaea. Hula switjha ho boemo ba ON e le "↑" ke hula switjha ho boemo OFF e le “↓”, fetola sebaka le nako ea ho tšoara tafole e tsamaisanang le eona ke ka tsela e latelang:
Leseli-taolo Setting
Karolo e khethiloeng ea karabelo ea leseli e ka ba ka ho sa feleng ho tloha ho approx. 10-50Iux, hula switjha ho boemo ba ON e le "↑" hula switjha ho boemo OFF e le “↓”switjha sebaka le khanya-taolo ea tafole e tsamaisanang ke ka tsela e latelang: 
Boemo ba Boemo ba Leseli ba Emeng
Fetolela ho on ke "↑", switjha ho tima ke“↓”; Tse tsamaellanang file ea sebaka sa switjha le boemo ba ho ema ka tsela e latelang:
Boemo ba Nako ea ho Ema
Fetolela ho on ke "↑". switjha ho tima ke “↓”;File ea sebaka sa switjha le tlhophiso ea nako ea ho ema ka tsela e latelang:
TLHOKOMELISO EA PARAMETER KA TAOLI E HOLE HO BUANA KA RC-100.
KEKETSO
HWDP IP66 IK08
Litekanyo
| Referense | A | B |
| HWOP-*06 | 600 limilimithara | 300-320 limilimithara |
| HWDP-*2 | 1200 limilimithara | 840-860 limilimithara |
| HWOP-*5 | 1500rnm | 1120-1140 limilimithara |
Ho hlongoa:
Hlakola likoti tse hlokahalang siling bakeng sa li-brackets tse ntseng li phahama, u nahane ka sebaka se pakeng tsa li-brackets tse ntseng li phahama. Bula likotoana tsa tšepe tse sa hloekang holim'a sesebelisoa. Haeba ho hlokahala poleiti ea LED e nang le PC diffuser e ka tlosoa habonolo ka sehokelo. Tobetsa setsi sa setsi ka har'a masakaneng a homang 'me u etse khokahanyo ea motlakase.
Kamehla sebelisa tšoelesa ea cable e loketseng kapa tiiso bakeng sa keno ka 'ngoe ho netefatsa boleng ba IP.
Sesebelisoa sena ke IP66 feela haeba ho sebelisoa litšoelesa tsa cable tsa M20 tse nang le rabara seal!
Sehlahisoa sena se loketse mocheso o pakeng tsa -20 le -45 * C.
Lisebelisoa tse nang le sensor ea RF:
Lisebelisoa tse nang le RF motion sensor li ka hlophisoa ka litsela tse peli:
- Ka khetho ea li-switches ho sensor ea RF
- Ka mofuta oa "infra-red transmitter" INT-REMOTE (khetho) "Universal transmitter" e fana ka monyetla oa ho theha letoto la lisebelisoa ka potlako le ha bonolo.
Khokahano ea motlakase:
E kenyelelitsoe lisebelisoa tsa ho kenya:
Likhetho tse ka bang teng:
| HWDP-SUS | Ho emisoa ho behiloeng bakeng sa HWDP 1.5 meter |
| NT-HOOE | Remoutu bakeng sa mofuta oa RF |
| 1-10y | E ka tima 1-10y |
| DALI | E tima DAL! |
| RF | Ka sensor ea RF |
| EMS | Emergency unit 3h autotest LiFePO batt. |
| EMSRF | Ka sensor ea RF le yuniti ea tšohanyetso 3h |
Sebaka sa ho lemoha bakeng sa ho kenya siling
TS'ELISO TS'ELISO
Ho kenya le ho hlokomela kamehla ho lokela ho etsoa ke basebetsi ba nang le tsebo. Mohloli oa leseli oa sesebelisoa sena ha o nkeloe sebaka, lebone le tlameha ho nkeloa sebaka qetellong ea bophelo ba lona.
Lisebelisoa tse senyehileng ka har'a sephutheloana sa mantlha li fapanyetsanoa ka tiiso.
Bakeng sa lisebelisoa tsa ka ntle, kamehla sebelisa lithupa tse tiileng tsa tšepe 'me u netefatse hore li na le ankora e tiileng.
The grounding e tlameha ho hokahanngoa ka nepo ka linako tsohle ho thibela mathata a polokeho.
Kamehla hlahloba hore na kgokelo e nepahetseng voltage teng.
E sebelisitsoe lamps
Kamehla khutlisetsa lisebelisoa tsa khale tsa LED kapa tse sa sebetseng sebakeng se loketseng sa pokello ho latela melao e sebetsang mabapi le ts'ireletso ea tikoloho.
E sebelisitsoe lamps li ka behoa sebakeng sa ho sebelisoa hape moo li amoheloang mahala.
Tšebeliso e nepahetseng ea lisebelisoa e etsa hore ho khonehe ho boloka mehloli ea bohlokoa ea tikoloho le ho thibela liphello tse mpe bakeng sa bophelo bo botle le tikoloho.
Integratech bvba - Groenstraat 48
BE3270 Scherpenheuvel – Belgium
Litokomane / Lisebelisoa
 |
integratech HWDP IP66 IK08 High Output [pdf] Buka ea Taelo HWDP IP66 IK08 Sehlahisoa se Phahameng, HWDP IP66 IK08, Sehlahisoa se Phahameng |