Litaba pata
1 Instructables Banana Candles Entsoe ka Plaster le 3d Printing
2 Tlhahisoleseding ea Sehlahisoa: Li-candles tsa Banana tse entsoeng ka Plaster le 3D Printing
3 Litaelo tsa Tšebeliso ea Sehlahisoa
4 DIkerese Tsa BANANA E ETSOANG KA PLASTER LE 3D PRINTING
4.1 BANANA CANDLE MOHLALA
4.2 MONATE PANANA MOHLALA
4.3 KAROLO E TLASE YA BANANA – PLA E KARETSO KA PLASTER
4.4 KAROLO YA PANANA E TLASE- PLASTER CAST Part1
4.5 KAROLO YA PANANA E TLASE- PLASTER CAST Part2
4.6 PEKO
4.7 LESEA KAROLO
4.8 LESELE MOLELE
4.9 LEKAKA LA KERESE
5 Litokomane / Lisebelisoa
5.1 Litšupiso
6 Related Posts

ditaelo-logo

Instructables Banana Candles Entsoe ka Plaster le 3d Printing
Banana-Candles-Made-With-Plaster-And-3d-Printing-product

Tlhahisoleseding ea Sehlahisoa: Li-candles tsa Banana tse entsoeng ka Plaster le 3D Printing

Li-candles tsa Banana tse entsoeng ka Plaster le 3D Printing ke morero oa DIY o lumellang basebelisi ho iketsetsa litšepe tsa bona tsa likerese tse nang le sebōpeho sa banana ba sebelisa theknoloji ea khatiso ea 3D le samente. Sets'oants'o sa kerese se na le likarolo tse peli, 'me karolo e ka holimo e le kerese 'me karolo e ka tlaase e entsoe ka samente. Mofuta o hatisitsoeng oa 3D o ka bolokoa hore o sebelisoe nakong e tlang, o lumella basebelisi ho etsa likerese tse ngata nakong e tlang. Morero o hloka lisebelisoa tse kang printa ea 3D, plaster ea Paris/gypsum/samente, boka ba likerese, lithapo, pampiri ea sanding, scalpel, filler/ putty, liatlana tse lahloang, borashe, lipente tsa acrylic, le varnish e thata ea kantle.

Litaelo tsa Tšebeliso ea Sehlahisoa

  1. Khoasolla mohlala oa kerese ea banana ho Thingiverse (https://www.thingiverse.com/thing:3664845).
  2. Sebelisa printa ea 3D ho hatisa likarolo tse kaholimo le tse tlase tsa sets'oants'o sa kerese ea banana.
  3. Tlosa thepa ea ts'ehetso ho tloha karolong e ka tlaase ea kerese ea banana 'me ue hloekise ka hohle kamoo ho ka khonehang.
  4. Haeba ho na le likoti, li koahele ka li-filler kapa putty.
  5. Lokisetsa motsoako oa samente ho ea ka litaelo tsa sephutheloana.
  6. Tšela motsoako oa samente ka har'a hlobo e hatisitsoeng ea 3D 'me u e lumelle hore e ome ka ho feletseng.
  7. Tlosa samente e entsoeng ka hlobo 'me u e lokise fatše ho theola mapheo a makukuno.
  8. Penta karolo e ka tlase ea sets'oants'o sa kerese ea banana u sebelisa lipente tsa acrylic kapa tsa spray kamoo u batlang.
  9. Kenya khoele ka har'a boka ba kerese 'me u e qhibilihe ka har'a boiler e habeli.
  10. Tšela boka ba kerese e qhibilihisitsoeng karolong e ka holimo ea sets'oants'o sa kerese ea banana 'me u lumelle hore e pholile le ho thatafala.
  11. Kenya kerese karolong e ka tlaase ea samente ea sets'oants'o sa kerese ea banana 'me u e bonese.

Hlokomela: Kamehla roala liatlana tse lahloang ha u sebetsa ka samente le lisebelisoa tse ling ho sireletsa matsoho a hau. Hape, etsa bonnete ba hore printa ea hau ea 3D e hlophisitsoe hantle bakeng sa liphetho tse ntle.

DIkerese Tsa BANANA E ETSOANG KA PLASTER LE 3D PRINTING

ka kura_kura

Ke bone sets'oants'o sena sa banana se makatsang kae-kae inthaneteng 'me ke ile ka hlōleha ho se boloka, kahoo ke ile ka qobelloa ho iketsetsa phetolelo ea ka. Sets'oants'o sena sa kerese / kerese se na le likarolo tse peli- karolo e ka holimo ke kerese 'me karolo e ka tlase ke samente. Haeba u rera ho khantša kerese, u ka boloka hlobo e hatisitsoeng ea 3D 'me u etse likerese tse ngata nakong e tlang. Ke boetse ke bonts'a example ea mokhoa oa ho sebelisa sebopeho sa MOLD ho CURA le mokhoa oa ho etsa plaster ka liforomo tse hatisitsoeng tsa 3D. Lisebelisoa:

  • PUSELETSO EA 3D
  • PLASTER OF PARIS/GYPSUM/CEMENT (KGAKGETHO)
  • KARETE KHAHLE, MAKHOPO
  • PAPER EA LEHLABA, SCALPEL, FILLER/PUTTY, LIPHEPHA TSE LAHLEHANG
  • LIBrushes, ACRYLIC PAINTS, VARNISH E THAHANG KA NTLE
BANANA CANDLE MOHLALA

Ke sebelisitse https://www.thingiverse.com/ntho:3664845 e le setsi sa banana ba ka, ke ile ka e kopanya ka thata ho tiisa mahlakore a ebotsoeng ebe ke eketsa karolo e pepesitsoeng ea banana. Likotoana ka bobeli li koalehile, karolo ea kerese e tla lula e sa tsitsitse ka har'a karolo ea plaster.

https://www.tinkercad.com/embed/erCIm94JSrJ?editbtn=1

MONATE PANANA MOHLALA

https://www.tinkercad.com/embed/9PWvJGL8plq?editbtn=1

KAROLO E TLASE YA BANANA – PLA E KARETSO KA PLASTER

Karolo ena e ka hatisoa ka tsela eo u neng u tloaetse ho e etsa 'me ea sebetsoa. Kahoo, sanding, filler, pente, varnish, joalo ka tloaelo. Ke ne ke ikemiselitse ho sebelisa samente ho leka ho bopa sekontiri se thata 'me ke ile ka etsa qeto ea ho leka ho koahela khatiso ea PLA ka lera la samente. Hang ha ke e hatisa ka PLA (eseng khatiso ea boleng bo botle, bophahamo ba 0.3mm layer, 15% intall, marako a 3 ... haholo-holo ho boloka nako, ke ne ke e-na le merero e meng e emetseng ho hatisoa), ke e koahetse ka lera le lesesaane la samente. Ke ne ke se na tšepo haholo, plaster hangata ha e khomarele polasetiki, empa ka tsela e itseng e ile ea loka. Ntlha ea pele, ke ne ke sebelisa pampiri ea sanding (40 grit) ho hatisa khatiso. Ka mor'a moo, ke ile ka kopanya palo e nyenyane ea samente ea Paris (samente e matlafalitsoeng) ho lumellana le tranelate e boima 'me ka sebelisa borashe bo ka lahloang ho e sebelisa hohle khatisong. Ke ile ka e tlohela hore e ome, ke e tšela ka lehlabathe, 'me ka eketsa karolo ea bobeli pele ke etsa lehlabathe hape.Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-1Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-2

KAROLO YA PANANA E TLASE- PLASTER CAST Part1

Ho na le tšobotsi ea boselamose ho CURA, e u lumellang ho etsa liforomo (kapa hlobo). Ha ke tsebe hore na morero o reriloeng oa tlhophiso ena ke ofe, empa esale ke e sebelisa ho hatisa hlobo ea li-busts le liemahale, lipitsa tse tlase, 'me ha e le hantle, eng kapa eng e ka behoang ka plaster. Seo u hlokang ho se etsa feela ke ho ea ho li-setting tsa Cura ebe u ngola MOLD ho bona likhetho tsa hau. Tobetsa likhetho tsohle tse fumanehang 'me u se u loketse ho leka hlobo.
Malebela ke ana:

  • Ho nka nako e ka bang 2x nako e telele ho hatisa karolo ea sebopeho sa hlobo ho feta sebakeng se tloaelehileng.
  • Hatisa ka marako a masesaane- marako a 1-2, empa ka ho khetheha e le lerako le le leng feela
  • U tlameha ho hatisa ka intall, ho itšetlehile ka boholo le sebōpeho sa karolo ea hau, u tla tlameha ho sebelisa pakeng tsa 5 le 15%. U ke ke ua hatisa ntle le eona, ho tla ba bonolo haholo 'me samente e tla etsa hore hlobo ea polasetiki e be matla.
  • Ela hloko litlhophiso tsa ho hula, u se ke ua qetella u e-na le likarolo tse likhoele, haholo-holo ka hare, moo plaster e tla ea teng.
  • Libopeho tse itseng li tla hloka tšehetso. Sena hape se tla lokela ho shejoa ka hloko. Litlhophiso tse fosahetseng joalo ka li-angle tse fosahetseng kapa sebaka sa tšehetso li ka senya mongolo oa hau. Ha u batle hore litšehetso li hatisoe ka har'a hlobo libakeng tseo u ke keng ua khona ho li tlosa.Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-3Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-4 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-5 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-6 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-7 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-8
KAROLO YA PANANA E TLASE- PLASTER CAST Part2

Hang ha e se e hatisitsoe, sheba ka hare 'me u netefatse hore ha ho na masoba kapa likotoana tse likhoele. Haeba ho hlokahala, e hloekise ka hohle kamoo ho ka khonehang, tlosa litšehetso 'me haeba u na le masoba, li koahele ka li-filler kapa putty. Ha hoa lokela ho ba le masoba haeba khatiso e le ea boleng bo botle 'me printa ea hau e hlophisitsoe hantle.

  • Kopanya samente (kapa samente) le metsi 'me ue tšele ka har'a hlobo.
  • Karolo ena e ne e e-na le libaka tse nyenyane, tse patisaneng, kahoo ke ile ka tšela samente ka mokotleng oa liphaephe, ka khoaela lehlaka la polasetiki le bolelele bo bokhutšoanyane ntlheng, ’me ka sebelisa sekontiri sena ho tšela samente mekoting eo eohle e menyenyane.
  • E tlohele hore e be teng. Ha ke khone ho e hatisa ka ho lekaneng- e tlohele matsatsi. U batla hore e phekoloe ka ho feletseng, eseng feela ho behoa, ho seng joalo, plaster e tla phatloha hang ha u qala ho e tlosa.
  • Hang ha e se e phekotsoe, sebelisa motsoako oa lisebelisoa (haholo-holo tsa nakoana) ho tlosa hlobo ea polasetiki.
  • Ke ile ka sebelisa Dremel ho khaola lebota la pele la polasetiki ebe ke sebelisa sesebelisoa se senyenyane ho ebola lebota le ka hare -> https://www.amazon.co.uk/Rolson-59137-Wax-Carver-S…\
  • Hlaba samente.Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-9 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-10 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-11 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-12 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-13 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-14
PEKO

Sebelisa lipente tsa acrylic le/kapa lipente tsa ho fafatsa ho khabisa karolo e ka tlaase ea banana. Ke tsamaile ka mebala e matla e susumelitsoeng ke bonono ba pop.Banana-CQandles-Made-With-Plaster-And-3d-Printing-fig-15

LESEA KAROLO

E itokiselitse ho hatisa hlobo bakeng sa karolo ea kerese. Hlobo e na le linotlolo tsa ho hokahana ha bonolo le ka potlako le mahlakore a malelele, kahoo pampiri clamps ka qosoa ho tšoara hlobo hammoho.

https://www.tinkercad.com/embed/l3iteG7Th2a?editbtn=1

LESELE MOLELE
  • Bokahare ba hlobo bo ne bo e-na le mokhoa o sa tloaelehang 'me ke ne ke sa tsebe hantle hore na e tla ba bothata hamorao, kahoo ke ile ka kenya lesela la varnish e thata, e ka ntle ka hare ho hlobo.
  • Ke ile ka kopanya hlobo ka pampiri clamps mme a sebelisa sethunya se chesang sa sekhomaretsi ho hokela khoele ka nakoana ka holim'a hlobo. Ke ile ka boela ka sebelisa sekhomaretsi ho pota-pota ka holimo ho etsa bonnete ba hore boka ha bo tsoe.
  • Ho boloka khoele e otlolohile, ke ile ka e tiisa ka sekhomaretsi le li-toothpicks (pic.3)Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-16Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-17 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-18 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-19
LEKAKA LA KERESE
  • Qhibiliha kerese ea boka ba mosehla 'me ue pholile ho 65-70 C, e tšele ka har'a hlobo, ebe u e tlohela hore e pholile.
  • Hlakola 'me u sebelise scalpel ho fokotsa mahlakoreng (ha ho hlokahala).
  • Beha kerese ka har'a setsi sa plaster.Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-20 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-21 Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-22

FINISHE

Banana-Candles-Made-With-Plaster-And-3d-Printing-fig-23

Litokomane / Lisebelisoa

tutorials Banana Candles Made with Plaster And 3d Printing [pdf] Litaelo
Li-Candles tsa Banana tse entsoeng ka Plaster le 3d Printing, Li-candles tsa Banana, tse entsoeng ka Plaster le 3d Printing, 3d Printing

Litšupiso

Related Posts

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *