Inovonics EN4216MR 16 Zone Multi Condition Receiver e nang le liphetho tsa phetisetso.

EN4216MR 16 Zone Multi-Condition Receiver e nang le li-Relay Outputs

Buka ea ho kenya le ho sebetsa

Fetileview

Moamoheli oa EN4216MR o o lumella ho kenyelletsa li-transmitters tse fihlang ho 16 le liphetho tse hlano ts'ebelisong efe kapa efe, 'me e kenyelletsa t.amper bakeng sa ho eketseha tamper security.
Baamoheli ba tlatsetso ba latelang ba fumaneha ho tsoa ho Inovonics:

Moamoheli	Alarm Output Relays	Fault Relays	Li-transmitters li tšehelitsoe
EN4204R	4	1	4
EN4216MR	5	1*	16
EN4232MR	11	1*	32

* Bonyane relay e le 'ngoe e tlameha ho sebelisoa bakeng sa liphoso ho netefatsa hore sistimi e laoloa. Ho ka 'na ha sebelisoa li-relay tse fetang bonngoe, empa seo se tla fokotsa palo ea li-relay tsa alamo.

Ho kenya Sisteme ea Ts'ireletso ea Inonics
Setsi sa tlhahlobo ea EchoStream se tlameha ho sebelisoa ho theha sistimi ea UL. Setsi sa tlhahlobo ea EchoStream se lekanya matla a lets'oao la melaetsa e pheta-phetoang e matla le ea sensor ho thusa ho ntlafatsa sistimi ea hau ea EchoStream.

Setšoantšo sa 1 Sample tsamaiso ea EchoStream
Setsi sa tlhahlobo ea EchoStream se u fa litekanyo tse peli tsa matla a lets'oao: boemo ba lets'oao le moeli oa lets'oao.

Boemo ba lipontšo
Boemo ba pontšo ke tekanyo ea tekanyo ea kakaretso ea decibel ea molaetsa.

Moeli oa lets'oao
Moeli oa letšoao ke tekanyo ea tekanyo ea decibel ea molaetsa, ho tlosa tekanyo ea decibel ea matšoao leha e le afe a sitisang. Thepa e se nang mohala ea Inovonics e lokela ho beoa ka har'a setsi e le hore lisebelisoa tsohle tsa ho qetela li hlahise lipalo tsa marang-rang tsa bonyane li-decibel tse 4.
Bobeli boemo ba pontšo le moeli oa pontšo li lekanngoa ka li-decibel. Hobane matla a lets'oao le moeli oa lets'oao li lekantsoe ka sekala sa logarithmic, phapang lipakeng tsa boemo ba decibel ea 3 (Bofokoli) le boemo ba decibel ba 4 (Botle) ​​ke phapang e kholo ho feta kamoo e ka bang ka sekala sa mola.
Tlhokomeliso: Inovonics e fana ka likhetho tse peli bakeng sa lipatlisiso tsa sebaka sa marang-rang: sesebelisoa sa tlhahlobo sa EN7017 le app le moamoheli oa tlhahlobo oa EN4016SK. Moamoheli oa tlhahlobo ea EN4016SK o bonts'a boemo ba decibel, athe EN7017 kit ea tlhahlobo le app li bonts'a feela hore kamohelo e ntle kapa e fokola. Bakeng sa lintlha tse ling, bona Buka ea EN4016SK Survey Receiver Installation and Operation Manual kapa EN7017 Survey Kit le Litaelo tsa ho Kenya App le Litaelo tsa Patlisiso ea Sebaka.

Tlhokomeliso: Sistimi ea EchoStream e lokela ho lekoa khafetsa ho netefatsa ts'ebetso. Ho etsa liteko: beha sisteme maemong a teko, bula sesebelisoa, 'me u netefatse karabo e nepahetseng.

Phatlalatso ea Letšoao la RF
Le hoja lehong, li-drywall le khalase hangata li lumella matshwao a RF hore a fete, lisebelisoa tse ling li ka thibela kapa tsa fokotsa phatlalatso ea matshwao a radio frequency (RF) ka ho thibela, ho bonahatsa, ho khelosa kapa ho monya matshwao a RF.
Nahana ka eng kapa eng pakeng tsa li-transmitters le li-repeater le/kapa moamoheli. Na ho na le kaho ea konkreite le tšepe? A na ho na le likokoana-hloko tsa letsopa kapa maralla? Ho na le lifate tse ngata? Lisebelisoa li lokela ho hlongoa ka tsela e le hore li se ke tsa angoa ke likarolo tsena.
Bakeng sa liphetho tse ntle ka ho fetisisa, li-transmitters le li-repeater li lokela ho kenngoa ka bophahamo bo lekaneng ho fihlela moeli oa pono ho ba pheta-pheta le/kapa moamoheli. Hangata sena se bolela hore li tla phahamisoa holimo kamoo ho ka khonehang.

Lintlha tse latelang ke litšitiso tse tloaelehileng ho phatlalatsoeng ha lets'oao la RF:

Lintho tse bonahalang	Ama	Keletso
Kaho ea tšepe, ho kenyelletsa le ductwork; liphaephe; lithupa; stucco, samente kapa konkreite e nang le letlooeng la terata; lijana tsa sathelaete, likamore tse nang le litšepe tse kang li-coolers kapa lihatsetsi; tšepe siding, safes, joalo-joalo.	E khona ho bonahatsa, ho monya le/kapa ho sitisa matshwao a RF.	Etsa phuputso ea sebaka sa marang-rang u sebelisa lisebelisoa tsa tlhahlobo ea waelese ea Inovonics ho netefatsa hore lets'oao la RF lea amoheleha, 'me, ha ho hlokahala, ho fumana hore na le fumana ba pheta-phetoang hokae.
Mabokose a tšepe a koaletsoeng ka ho feletseng.	E ka thibela matšoao a RF.
Liphanele tsa letsatsi, mabota a li-cinder block, lifensetere tse kentsoeng ka har'a letsatsi.	E khona ho monya le/kapa ho bonahatsa matshwao a RF.
Limela.	E ka fokotsa matšoao a RF. Tikoloho ea RF e ka fetoha ha lifate li tšoloha kapa makhasi a mela.	Kenya batho ba pheta-phetoang ha mathata a hlaha.
Sephethephethe sa likoloi le literaka.	E ka senya matšoao a RF.	Lisebelisoa tsa Mount Inovonics ka bophahamo bo lekaneng ho fihlela moeli oa pono ka holim'a sephethephethe.

Lintlha tsa ho Kopana le Inovonics

Bakeng sa lihlahisoa le livideo tsa ho kenya re etele ho www.inovonics.com/videos kapa sebelisa khoutu ea QR e ka tlase.

Haeba u na le mathata ka mokhoa ona, ikopanye le lits'ebeletso tsa tekheniki tsa Inovonics:

• E-mail: support@inovonics.com
• Mohala: 800-782-2709; 303-939-9336.

Setšoantšo sa EN4216MR

Setšoantšo sa 2 Phanele e ka pele ea Moamoheli

• A Output LED
• B Phoso ea LED
• C Matla a LED
• D pontšo ea LCD
• E holimo konopo
• F konopo ea tlase
• G konopo ea morao
• H Kenya konopo
• Output LED: E bonesa ha tlhahiso efe kapa efe ea transmitter e sebetsa.
• Fault LED: E bonesa ha transmitter efe kapa efe e romella boemo ba phoso. Matla a LED: Ho bonesa ha o amohela matla.
• Pontšo ea LCD: E bonts'a boemo, lethathamo la liketsahalo le tlhaiso-leseling ea lenaneo. Hlakola LED: E ea bonesa ha phetiso efe kapa efe e hlokomelehang e amoheloa. LED ena e bonahala feela ha sekoahelo se tlosoa.
• Konopo ea holimo: E tsamaisetsa ponts'o holimo.
• Konopo e tlase: E tsamaisetsa ponts'o fatše.
• Konopo e ka morao: E khutlisetsa pontšo ho menu e fetileng, kapa ha e totoba likhethong tse kholo, e khutlisetsa unit mokhoeng o tloaelehileng oa ts'ebetso. Ha o kenya tlhahisoleseding pontshong, e kgutlela tlhakung ya ho qetela e kentsweng.
• Kenya konopo: E khetha ntho ea menu e hlahang hajoale. Haeba e le mokgweng o tlwaelehileng wa tshebetso, seta yuniti ho mokgwa wa menu.
• Konopo ea ho seta bocha: E hlakisa boemo ba hajoale bakeng sa lintlha tsohle ebe e hlophisa liphetho tsohle le li-LED. E tlaleha keno ea ho seta botjha tlalehong ya ketsahalo mme e beakanya botjha dibala-nako tsa fensetere tsa bolebedi. Konopo ena e fumaneha feela ha sekoahelo se tlosoa.

Likarolo tsa ka hare tsa EN4216MR

• Taba ea tokollo ea Matlo
• B Maqhama a matla
  C Ts'ebetso ea LED
• D Liphetho tsa Relay ETamper tlhahiso
• F Sehlahisoa sa tahlehelo ea matla sa moamoheli
• Sephetho sa G Jam H Seta hape
• Ke Reset konopo
• J Housing tamper switjha le selemo
• K Decode LED

 Ho kenya le ho Qala

Lintlha tsa Tlhophiso

• Lihlahisoa tsena li etselitsoe ho hlokomeloa ke litsebi tsa ts'ireletso ea litsebi.
• Lihlahisoa li lekoa bakeng sa tšebeliso ea ka tlung.
• Se ke oa kenya li-detectors tsa mohala tse se nang mohala, li-co detectors, ho qala li-transmitters kapa li-repeater libakeng tse ntšoang, joalo ka lithaele tsa siling.
• Lihlahisoa tsohle li lokela ho lekoa ka letsoho beke le beke.
• EN4216MR e tlameha ho kenngoa ka har'a 30 m (98.5 ft) ea yuniti ea taolo.
• Li-transmitters tse fokolang tsa matla li tla lekanyetsoa ho sesebelisoa se le seng se qalang.
• Sesebediswa se seng le se seng se sebetswang ka letsoho se qalang se tla kenngwa e le hore se se ke sa shejwa ke setjhaba le hore se tle se sebetswe ka tsela e ke keng ya totobala ho motho ya hlaselang.
• Sesebelisoa se seng le se seng se qalang se tla kengoa e le hore se se ke sa bonahala ho batho ba hlaselang nakong eo ba lekang ho emisa, 'me se se ke sa bonahala ho sechaba kapa batho ba hlaselang pele ba leka ho emisa.
• Ho kenya li-alamo le litsamaiso tsa ho ts'oara li tla laoloa ke Maemo a ho Kenya le ho Hlophisa Burglar le Holdup Alarm Systems, UL 681.
• Ho kenya ho tla ba ho latela CSA C22.1, Khoutu ea Motlakase ea Canada, Karolo ea I, Tekanyetso ea Tšireletseho bakeng sa Lits'ebetso tsa Motlakase; CAN/ULC S302, Tekanyetso ea ho Kenya, ho Hlahlobisisa le ho Lekoa ha Litsamaiso tsa Alarm tsa Intrusion; le CAN/ULC S301, Tekanyetso bakeng sa Litsi tsa ho Amohela Letšoao Tlhophiso le Ts'ebetso. Libaka tseo ho tsona ho sa khothaletsoang ho kenya tšebetsong le tsona li tla kenyeletsoa.

Power Cabling
Tlhokomeliso: Lihokelo tse fosahetseng li ka baka tšenyo yuniti.
Pele o qala ho qala, o tla hloka ho hokela motlakase ho moamoheli. Ho hokela motlakase ho moamoheli:

1. Sebelisa screwdriver e nyane ho tobetsa li-tab tsa tokollo ea matlo ka holimo kapa tlase ho moamoheli; arola matlo.
2. Hokela cabling ea motlakase ho likhokahanyo tsa Vs (+) le GND (-).
   • Mohloli oa matla o lokela ho ba 11-14 VDC. Phepelo ea motlakase ha ea lokela ho fetoloa, e sa sitisoe, 'me e laoloe.
   • Sebelisa terata ea 18 - 22 gauge bakeng sa lik'habote tsohle, 'me u netefatse hore torque e holim'a litheminale tsa screw ha e fete 7-inch-pounds.
     Tlhokomeliso: Lipotoloho tsohle tsa marang-rang tse fumanang matla ho tsoa mehloling ea motlakase e hokahaneng le yuniti ea taolo li tlameha ho fokotsa matla. Route the cabling ka lehlakoreng cabling kapa ka morao matlo knockout.

Kopanya Input/Output Cabling

Hlokomela: Sehlahisoa sena se sebelisa tlhahiso ea TTL bakeng sa ho seta bocha. TampLi-circuits tsa er le jam ke litlamorao tse omeletseng, athe tahlehelo ea matla ke tlhahiso e bulehileng. Tsohle li hokahana le 22 AWG ho 98.5 ft boholo ho isa yuniti ea taolo e thathamisitsoeng ka thoko.

1. Hokela cabling ho tlhahiso ea tahlehelo ea matla ea moamoheli. E tlameha ho hlophisoa bakeng sa ho kenya UL.
   • Sehlahisoa sa tahlehelo ea matla sa moamoheli ke sephetho se tloaelehileng se koetsoeng (N/C) se bulehileng se bulang ha moamoheli a felloa ke matla.
2. Hokela cabling ho tamper tlhahiso. E tlameha ho hlophisoa bakeng sa ho kenya UL.
   • The tamper output ke ntho e tloaelehileng e bulehileng (N/O) ea pokello e bulehileng e tlalehang nyeoe ea moamoheli tamper ho sesebelisoa sa kantle.
3.  Hokela cabling ho tlhahiso ea jeme. E tlameha ho hlophisoa bakeng sa ho kenya UL.
   • Sehlahisoa sa jeme ke ntho e tloaelehileng e koetsoeng (N/C) e bulehileng ea pokello e buloang ha liteishene tsa lerata li ntse li le kaholimo ho boleng bo reriloeng esale pele bakeng sa metsotsoana e 10. Sephetho sa jeme se behiloe ho mofuta oa tlhahiso ea molateli.
4.  Hokela sesebelisoa sa nakoana ho kenya letsoho le ho seta bocha (setšoantšo sa 4, "EN4216MR terminals"). E tlameha ho hlophisoa bakeng sa ho kenya UL.
   • Potoloho ea ho kenya bocha e lumella ho kenya switch ea "remote" ea "remote" eo hangata e butsoeng (N/O) ho hlakola liphoso, ho notlolla liphetho, le ho khutlisetsa moamoheli boemong bo tloaelehileng.
5. Hokela cabling ho li-terminals tsa tlhahiso. E tlameha ho hlophisoa bakeng sa ho kenya UL.
   • EN4216MR e fana ka li-relay tse tšeletseng tsa Foromo-C.

Setšoantšo sa 4 li-terminals tsa EN4216MR

Thaba ea Moamoheli
Tlhokomeliso: Beha seamoheli sebakeng se ntšitsoeng tšepeng. Lintho tsa tšepe (mosebetsi oa li-duct, li-screen mesh tsa terata, mabokose) li tla fokotsa mefuta ea RF.
Tlhokomeliso: Bakeng sa litsamaiso tse thathamisitsoeng tsa UL tse nang le switch-up ea UL, the
EN4216MR e tlameha ho ba ka har'a maoto a mararo ho tloha keypad ea sistimi ho a
sebaka se sa bonahaleng ho tloha sebakeng se sirelelitsoeng.

1. Sebelisa liankora le likurufu tse fanoeng ho kenya seamoheli sebakeng se fumanehang bakeng sa tlhokomelo ea nako e tlang.

Tlhophiso ea Lintlha le Ngoliso
Transmitter e 'ngoe le e' ngoe e tlameha ho theha le ho ingolisa sebakeng se itseng. Hang ha e se e ngolisitsoe, li-alamo tsa li-transmitters li tla etsoa 'mapa ho latela (li)alamo tse nepahetseng.

Tse latelang ke li-transmitters tse tšehetsoeng ke EN4216MR:

Hlokomela: Ikopanye le Inovonics bakeng sa lethathamo la lisebelisoa tse ling tse tsamaellanang.

Tafole 1-1: EN4216MR Li-transmitters tse tšehelitsoeng

Phetiso	Alamo 1	Alamo 2	Alamo 3	Alamo 4
EN1215EOL	Sebaka sa ho qetela
EN1215WEOL	Sebaka sa ho qetela	Reed switch
EN1223D	Likonopo ka bobeli
EN1235SF	Konopo
EN1235DF	Likonopo ka bobeli
EN1244	Mosi
EN1245	CO
EN1249	Bili sefi
EN1261HT	Motsamao

Lethathamo la 1-2: Lenaneo la Boemo ba Mathata a Default

Sephetho/ Relay	Boemo
6	Tamper
6	Betri e tlase
6	Tlhokomelo Tahlehelo/ E sa sebetse
Sheba Setšoantšo sa 4, “liteishene tsa EN4216MR” leqepheng la 3.	Tahlehelo ea Matla a Mohala

Lenaneo la Ntlha

1. Ho tsoa skrineng sa ho qala sa EN4216MR, tobetsa konopo ea kenya ho fihlella likhetho tse tharo tsa mantlha tsa moamoheli.
2. Sebelisa likonopo tsa holimo le tlase ho ea ho instola & tšebeletso menu; tobetsa konopo ea ho kenya.
3. Kenya phasewete ea hau ho fihlella menyetla ea instola le lits'ebeletso.
4. Ho latela litaelo tse karolong ea “Setup Point” leqepheng la 4.
5. Hang ha li-transmitter tsohle li se li hlophisitsoe, etsa tlhahlobo ea ho tsamaea, u kenye mochine o mong le o mong o abetsoeng moamoheli le ho netefatsa lets'oao le letle.

Tlhokomeliso: Lekola sistimi ka linako tsohle bakeng sa ts'ebetso ha e qeta ho kenya.

EN4216MR 16 Zone Multi-Condition Receiver e nang le Ts'ebetso ea Relay Outputs le Lits'oants'o tsa ho Seta lintlha.

Sefate sa Menu

• MAEMO A NTLHA, sheba 4.3, “Point Status” leqepheng la 4.
• LEBITSO LA LIKETSAHALO, bona 4.4, “Lengolo la Ketsahalo” leqepheng la 4.
• INSTALL & SERVICE, 4.5, "Kenya & Service" leqepheng la 4.
• TLHOKOMELISO EA SETEP, sheba “Setup Point” leqepheng la 4.
• NTLHA #
• LIEKETSENG NAKO
• TS'IRELETSO/ MPHETI
• LIEKETSENG ALAMO
• TLHOKOMELISO
• TLHOKOMELISO MOFUTA
• SEBELISA TSOA/MOFUTA
• TAMPER TSOA/MOFUTA
• TLHOKOMELO YA BETTER E TLASE/MOFUTA] TLHALOSO
• NGOLISA
• REGISTER TRANSMITTER, sheba “Ngolisa
• Transmitter” leqepheng la 5.
• HLAKOLA NTLHA, sheba “Delete Point” leqepheng la 5.
• MATLA A POTSO, sheba “Matla a Pontšo” leqepheng la 5 .
• FETOLA PASSWORD, sheba “Fetola Password” leqepheng la 5.
• TLHOKOMELISO TSA FACTORY, bona “Factory Config” leqepheng la 5.

EN4216MR skrine ea ho qala
Sesepa sa ho qala sa EN4216MR se bonts'a alamo le tlhaiso-leseling e fosahetseng ponts'ong ea LCD. Lintlha tse ho alamo li hlahisoa e le "Alamo", 'me nomoro ea ntlha e latela. Haeba ntlha e fetang e le 'ngoe e le alamo, ponts'o e ea ho ntlha ka 'ngoe. Haeba ntlha e na le alamo e fetang e le 'ngoe, ponts'o e ea ho alamo ka 'ngoe. Maemo a phoso a bontšoa ke "Fault" ponts'ong ea LCD haeba ho se na alamo e seng e hlahisitsoe, 'me linomoro tsa lintlha ha li hlahisoe.
Lialamo le liphoso li tla hlaha hakhutšoanyane feela ha alamo kapa phoso e qala ho amoheloa, ebe skrine ea ho qala e tla khutlela boemong bo loketseng. Bakeng sa lintlha tse qaqileng tsa alamo le liphoso, sheba karolo ea 4.3, "Point Status" leqepheng la 4.

Boemo ba Ntlha
Menu ya boemo ba ntlha e o dumella ho view lintlha tse qaqileng tsa alamo le liphoso. Lintlha tsa boemo ba lintlha li fumaneha ntle le ho kenya phasewete.

Ho fihlella menu ya boemo ba ntlha

1. Ho tsoa skrineng sa ho qala sa EN4216MR, tobetsa konopo ea ho kenya ho fihlella limmapa tse tharo tse kholo tsa moamoheli. Lipontšo tsa "Point Status".
2. Tobetsa Enter ho hlahisa lintlha tsa boemo ba ntlha.
3. Sebelisa likonopo tsa holimo/tlase ho phenya lintlheng; tobetsa konopo ea kenya hape ho view dipoelo maemo a bontshitsweng di bapilwe ho.

• Lifolakha tsa boemo ba lintlha li hlalosoa ka tsela e latelang: A = Alarm (transmitter feela);
  T = Tamper; B = Betri e tlase; L = tahlehelo ea AC (e pheta-pheta feela); Ke = E sa sebetseng.
  Tlhokomeliso: Haeba "-" e bonts'a, boemo bo bonts'itsoeng bo entsoe ka 'mapa oa lefeela.

Lethathamo la Ketsahalo
Lenane la liketsahalo le bonts'a liketsahalo tse 50 tsa ho qetela tse etsahetseng, ebang ke lialamo, kapa tampliphoso tse itseng kapa tse sa sebetseng. Tlhahisoleseding ea tlaleho ea ketsahalo e fumaneha ntle le password.

1. Ho tsoa skrineng sa ho qala sa EN4216MR, tobetsa Enter.
2. Sebelisa likonopo tse holimo kapa tse tlase ho ea ho "Event Log"; tobetsa konopo ea ho kenya.
3. Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa liketsahalong.
4. Neng viewmabapi le liketsahalo tsa transmitter, tobetsa enter ho bona sephetho seo 'mapa oa liketsahalo o se buang.

Tlhokomeliso: Ha ho tlhahiso e tla hlahisoa haeba ketsahalo e entsoe ka 'mapa oa lefeela.

Kenya & Tšebeletso
Tlhokomeliso: password ea kamehla ke 3446.
Menu ea ho kenya le ea lits'ebeletso e sebelisetsoa ho seta tlhophiso ea feme, ho fetola phasewete, view matla a mats'oao, hlakola lintlha, li-transmitter tsa ngodisa, le lintlha tsa ho seta bakeng sa lintlha life kapa life tse hlophisitsoeng.

Ho fihlella lenane la instola le tshebeletso:

1. Ho tsoa skrineng sa ho qala sa EN4216MR, tobetsa konopo ea kenya ho fihlella likhetho tse tharo tsa mantlha tsa moamoheli.
2. Sebelisa likonopo tsa holimo le tlase ho ea ho instola & tšebeletso menu; tobetsa konopo ea ho kenya.
3. Kenya phasewete ho fihlella dimenu tsa instola le tshebeletso.

Sebaka sa ho seta

1.  Ho tsoa ho menu ea instola le lits'ebeletso, tobetsa Enter ka "Setup Point" hang-hang.
2. Sebelisa likonopo tsa holimo/tlase ho phenya linomoro tsa lintlha; tobetsa konopo ea ho kenya ho khetha ntlha.
   • "Tx Registr'd" e bonts'a haeba transmitter kapa repeater e ngolisitsoe hona joale sebakeng sena; "Tx Not Regstr'd" e bonts'a haeba ho se na transmitter e ngolisitsoeng sebakeng sena.
3. Tobetsa Enter ho tsoela pele.
   Nako ea Tlhokomelo: E beha moeli oa nako ho li-transmitters tse sieo.
4. Nako e nepahetseng ke lihora tse 0 ho isa ho tse 99. Nako ea ho qetela ke metsotso e 60. Ho khetha ho tima tsamaiso. Tlhokomeliso: Ho tima tlhokomelo ho ka beha botšepehi ba sistimi ea hau kotsing. Inovonics ha e khothaletse ho tima bolaoli. Hore tsamaiso e sebetse ka nepo, nako ea bolebeli e tlameha ho behoa bakeng sa nako e kholo ho feta nako ea ho kena ha transmitter.

• Sebelisa likonopo tsa holimo le tlase ho fetola nako ea ho beha leihlo; tobetsa konopo ea ho kenya ho khetha.
• Sebelisa likonopo tsa holimo le tlase ho fetola pakeng tsa "Hrs" (lihora) le "Min" (metsotso); tobetsa konopo ea ho kenya ho khetha. Kgetha Tshireletso/Repeater: E lokisa alamo ya ntlha le melaetsa ya tlhokomeliso e le e pheta-phetoang kapa sefetisi sa tshireletso.
• Sebelisa likonopo tsa holimo le tlase ho khetha "Khetha Tšireletso" bakeng sa transmitter kapa "Khetha Repeater" bakeng sa se pheta-pheta; tobetsa konopo ea Enter ho khetha.
• Litlhahiso tsa Alarm: E lumella li-transmitter tsa ts'ireletso tse nang le maemo a mangata a alamo ho abeloa mofuta o fapaneng oa tlhahiso le tlhahiso bakeng sa boemo bo bong le bo bong. Ho fumana lintlha tse ling, sheba Lethathamo la 1-1:, “EN4216MR Li-transmitters tse Tšehetsoeng”.
• Sebelisa likonopo tsa holimo le tlase ho bona palo ea li-alamo tse kenang bakeng sa transmitter; tobetsa Enter ho khetha.
  Alarm Out: E 'mapa maemo a alamo a transmitter ea ts'ireletso ho fetisa liphetho.
• Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa linomorong tsa sephetho. Ho khetha "-" ho tla tima tlhahiso ea alamo.
• Tobetsa Enter ho khetha tlhahiso eo u ka e sebelisang bakeng sa boemo ba alamo.
  Alarm Output Type: E khetha mofuta oa tlhahiso bakeng sa boemo ba alamo. Ea kamehla ke molateli.
• Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa likhethong tsa mofuta oa tlhahiso; tobetsa konopo ea Enter ho khetha khetho eo u e batlang:

Mofuta oa Sephetho	Tlhaloso
Molateli	Sephetho se bonts'a boemo ba alamo ea transmitter.
Ho qhekella	Sehlahisoa sea bulela ha se kentsoe 'me se lula se butsoe ho fihlela moamoheli a seta bocha.
Fetolela	Sephetho se fetoha se bolela nako le nako ha sesebelisoa se romella ts'ebetso e ncha. Tobetsa konopo ea Enter ho khetha. Lipontšo tsa "Inactive" ha li khethiloe. Nako e sa sebetseng e thibela puisano e hlahisoang. Sebaka se nepahetseng ke metsotsoana e 2.0 ho isa ho 99.5, ka increments ea metsotsoana e 0.5. Sebelisa likonopo tsa holimo le tlase ho tsamaea.

Mofuta oa Sephetho	Tlhaloso
Motsotswana	Nakoana: Poelo e buleha ka nako e hlophisitsoeng, ebe ea tima, ho sa tsotelehe boemo ba sesebelisoa. Tobetsa konopo ea Enter ho khetha. "Moment" e bonts'a ha e khethoa. Sena se beha nako eo tlhahiso e tla lula e sebetsa. Sebaka se nepahetseng sa metsotsoana e 0.5 ho isa ho 99.5, ka increments ea metsotsoana e 0.5. Sebelisa likonopo tsa holimo le tlase ho tsamaea.

E sa sebetseng: Phetiso ea 'mapa/e pheta-pheta phoso ea ho se sebetse.

• Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa linomorong tsa sephetho.
• Ho khetha "-" ho tla tima tlaleho ea ho se sebetse.
• Tobetsa Enter ho khetha tlhahiso eo u ka e sebelisang bakeng sa transmitter/repeater ena.] Mofuta oa Output o sa sebetseng: E ​​khetha mofuta oa tlhahiso bakeng sa boemo bo sa sebetseng.
• Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa likhethong tsa mofuta oa tlhahiso; tobetsa konopo ea Enter ho khetha khetho eo u e batlang:

Tamper Out: Setsi sa limmapa/se pheta-pheta tamper fault output.

• Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa linomorong tsa sephetho.
  Ho khetha "-" ho tla tima tamper tlhahiso.
• Tobetsa Enter ho khetha tlhahiso eo u ka e sebelisang bakeng sa t ea transmitter/repeaterampphetiso ea.

Tamper Output Type: E khetha mofuta oa tlhahiso bakeng sa tampboemo ba.

• Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa likhethong tsa mofuta oa tlhahiso; tobetsa konopo ea Enter ho khetha khetho e lakatsehang ea tlhahiso.

Tlas'a Batt Out: Phetisetso ea 'mapa / e pheta-pheta e nang le phoso e tlase ea betri.

• Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa linomorong tsa sephetho.
  Ho khetha "-" ho tla tima betri e tlase.
• Tobetsa Enter ho khetha tlhahiso eo u ka e sebelisang bakeng sa phetisetso ea betri e tlase ea transmitter/repeater.

Mofuta o Motla oa Battery Output: E khetha mofuta oa tlhahiso bakeng sa boemo bo tlase ba betri.

• Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa likhethong tsa mofuta oa tlhahiso; tobetsa konopo ea Enter ho khetha khetho eo u e batlang:
  Ho Lahleheloa ke Matla a Mohala: Limmapa tse pheta-phetoang matla a tahlehelo ea matla li hlahisoa.
• Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa linomorong tsa sephetho.
  Ho khetha "-" ho tla tima tlhahiso ea tahlehelo ea matla.
• Tobetsa Enter ho khetha tlhahiso eo u ka e sebelisang bakeng sa phetisetso ea tahlehelo ea motlakase ea mohala ona.

Mofuta oa Phallo ea Matla a Mohala: E khetha mofuta oa tlhahiso bakeng sa boemo ba tahlehelo ea matla a mohala.

• Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa likhethong tsa mofuta oa tlhahiso; tobetsa konopo ea Enter ho khetha khetho eo u e batlang:
  Mongolo: Kenya mongolo o hlalosang oa litlhaku tse robeli bakeng sa transmitter/repeater
• Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa litlhakung tsa alphanumeric; tobetsa kenya ho khetha le ho fetela pele ho tlhaku e latelang. Ho khetha sebaka, tobetsa Enter ntle le ho khetha digit.
  Ela hloko: Haeba o sa sebelise litlhaku tse robeli kaofela, o tlameha ho kenya likheo ho fihlela qetellong ea mola.
• Ha o qetile, tobetsa Enter hape ho phethela khetho.

Ngolisa Transmitter: Khetho ea "register transmitter" e u lumella ho ingolisa transmitter kapa repeater sebakeng se hlophisitsoeng.

• Sebelisa likonopo tsa holimo le tlase ho fetola pakeng tsa "N" bakeng sa che le "Y" bakeng sa e, ho khetha hore na u lakatsa ho ngolisa mochine o fetisang molaetsa kapa che; tobetsa Enter ho khetha.
• Tobetsa konopo ea "transmitter/repeater's reset" ho "Reset Xmitter".
• Ha “Tx Reg'd” e hlaha, tobetsa enter ho qetela le ho fetela ntlheng e latelang.
• Ha li-transmitters tsohle li se li ngolisitsoe, tobetsa seta botjha ho moamoheli ho hlakola liphoso.
  Tlhokomeliso: Transmitter/repeater e ka ngolisoa ho fihla moo hamorao ka ho sebelisa molaetsa oa "Register Xmitter" ho instola & service menu.

Ngolisa Transmitter
Khetho ea register xmitter e u lumella ho ngolisa transmitter kapa repeater.

1. Ho tsoa ho menu ea ho kenya le ea lits'ebeletso, sebelisa likonopo tse holimo le tlase ho ea ho "Register Xmitter" kapele; tobetsa konopo ea ho kenya.
2. Sebelisa likonopo tsa holimo le tlase ho khetha ntlha eo u batlang ho ngolisa transmitter/repeater ho eona.
3. Sebelisa likonopo tsa holimo le tlase ho fetola pakeng tsa "N" bakeng sa che le "Y" bakeng sa e, ho khetha hore na u lakatsa ho ngolisa transmitter/repeater ho fihla ntlheng; tobetsa Enter ho khetha.
4. Tobetsa konopo ea "transmitter/repeater's reset" ho "Reset Xmitter".

Hlakola Ntlha
Khetho ea DELETE POINT e u lumella ho hlakola tlhaiso-leseling ea ngoliso ea li-transmitter libakeng tsohle tse ngolisitsoeng, kapa sebakeng se itseng. Lintlha tsa lintlha tse hlophisitsoeng ha li hlakoloe; feela nomoro ea boitsebahatso ea ngoliso e amanang le li-transmitters kapa li pheta-pheta.

Ho hlakola lintlha

1. Ho tsoa ho menu ea ho kenya le ea tšebeletso, sebelisa likonopo tse holimo le tlaase ho ea ho "Delete Point" kapele; tobetsa konopo ea ho kenya.
2. "Tlosa Tsohle?" dipontsho tsa kapele. Sebelisa likonopo tsa holimo le tlase ho khetha "N" bakeng sa che kapa "Y" bakeng sa e; tobetsa Enter ho khetha.
3. Haeba u khethile che, "Delete Point" e bonts'a kapele. Sebelisa likonopo tsa holimo le tlase ho khetha ntlha eo u batlang ho e hlakola; tobetsa Enter ho khetha.
4. Tobetsa konopo ea ho kenya. Haeba ho na le lintlha tse fetang bonngoe tse ngolisitsoeng, joale ho tobetsa konopo ea kenya ho khutlela khethong ea lintlha bakeng sa ho hlakoloa; haeba ho se na lintlha tse ngolisitsoeng, ponts'o e khutlela ho menu ea instola le lits'ebeletso.

Matla a Pontšo
Khetho ea SIGNAL STRENGTH e sebelisetsoa ho lekanya matla a lets'oao le mathata a ho kenya mathata.

1.  Ka potlako ea "Signal Strength", tobetsa Enter.
   Ntlha ea pele e hlophisitsoeng e bonts'a, hammoho le boleng ba pontšo ea boleng bo botle, bo fokolang kapa bo se nang letho.
   Tlhokomeliso: Ntlha e tlameha ho ba le transmitter e sebetsang e amanang le eona ho bonts'a matla a lets'oao.
2. Sebelisa likonopo tse holimo/tlase ho tsamaisetsa li-transmitters tse ngolisitsoeng.
3. Tobetsa Enter ho view boemo (LV) le margin (MA).
   • Boemo bo bontša matla a lets'oao ka kakaretso; moeli o bontša lets'oao
   matla ho tlosa lerata la bokamorao.
   Tlhokomeliso: Inovonics e khothaletsa boemo ba 10 bakeng sa lits'ebetso tse ngata.

Fetola senotlolo
Li-password li ka ba bolelele ba linomoro tse hlano. Lekunutu ke 3446. Ho fetola phasewete:

1. Ho tsoa ho menu ea instola le lits'ebeletso, tobetsa Enter ka "Change Password" hang-hang.
2. Sebelisa likonopo tsa holimo/tlase ho tsamaisetsa lipalo; tobetsa Enter ho khetha le ho fetela pele ho nomoro e latelang.
   Tlhokomeliso: Ho khetha null kaha senotlolo se tla tima ts'ebetso, ho lumella basebelisi ho etsa mesebetsi ea moamoheli le/kapa ho fetola liparamente ntle le password.
3. Ha o qetile, tobetsa Enter hape ho phethela khetho.
4. Ha "Password Fetola" e hlaha, tobetsa Enter ho khutlela ho instola & tšebeletso menu.
   Tlhokomeliso: Boloka phasewete e ncha sebakeng se sireletsehileng. Haeba phasewete e ncha e lahlehile, u ke ke ua khona ho fihlella moamoheli ntle le ho e khutlisetsa ho li-factory tsa feme joalo ka ha ho hlalositsoe ho "Factory Config" leqepheng la 5.

Fektheri Config
Khetho ea tlhophiso ea feme e sebelisoa ho khutlisetsa EN4216MR mefuteng ea eona ea feme.
Tlhokomeliso: Ho khetha tlhophiso ea feme ho tla hlakola lintlha tsohle tse hlophisitsoeng le tse hlahisoang, hammoho le password.
Tlhokomeliso: Ho sebelisoa nako e telele ea tieho ea metsotsoana e 60 ho thibela alamo ho sebetsa nakong ea ho kena le ho tsoa ha meaho.

Ho khutlisetsa lipehelo tsa tlhophiso ea feme ho EN4216MR:

1. Ho tsoa ho menu ea ho kenya le ea lits'ebeletso, sebelisa likonopo tse holimo le tlase ho ea ho "Factory Config" kapele; tobetsa konopo ea ho kenya.
2. "Reset Config" e hlaha. Sebelisa likonopo tsa holimo le tlase ho khetha "Y" bakeng sa e; tobetsa Enter ho khetha.
3. "Config Reset" e hlaha kapele; tobetsa konopo ea kenya ho khutlela ho instola & tšebeletso menu.

Moamoheli a ka khutlisetsoa ho tlhophiso ea kamehla ea feme ka tatellano e qaliloeng ea hardware.

1. Hokela terata pakeng tsa theminale ea ho seta botjha le theminale e fatshe.
2. Ha u ntse u tobetsa konopo ea morao, potoloha matla ho ea ho yuniti.
3. Tlosa konopo ea morao 'me u tlose terata pakeng tsa theminale ea ho reset le fatše.
4. "Reset Config?" lipontšo; khetha "Y" ebe o tobetsa konopo ea Enter.

Ho batle phoso

Bothata	Litharollo Tse ka khonehang
Moamoheli a ke ke a tima.	Netefatsa hore lithapo tsa hau tsa motlakase le tsa fatše li hokahane ka mokhoa o sireletsehileng ho VS le GND liteisheneng tsa motlakase. Matla a kenang a mitha ho netefatsa hore e sebetsa ho 11-14 VDC, 55- 100mA. Boloka bolelele ba li-cable bo le khuts'oane ka moo ho ka khonehang ho fokotsa matla a lithapo. Lekanya voltagphepelo ho moamoheli ho etsa bonnete ba hore tlhoko ea motlakase e fihlelleha bakeng sa lithapo tse telele tsa cable.
Melaetsa e tsoang ho li-transmitters tse ngolisitsoeng ha e amoheloe.	Netefatsa hore moamoheli o fumana matla a lekaneng. Etsa bonnete ba hore u mothating o nepahetseng oa ho etsa mananeo ho ngolisa transmitter. Pontšo e lokela ho baleha "Seta Xmitter bocha. Etsa bonnete ba hore o tobetsa konopo ea reset ho transmitter e nepahetseng eseng ho moamoheli. Atametsa transmitter haufi le moamoheli ho netefatsa hore e maemong 'me e ka utluoa ke moamoheli.
Tamptlhahiso ha e sebetse.	• Netefatsa tamplithapo tsa er output li kopana le lipehelo 'me li hoketsoe ka mokhoa o sireletsehileng ho li-terminals tse nepahetseng.
Sephetho sa Jam ha se sebetse.	• Netefatsa hore lithapo tsa jam li kopana le litekanyo 'me li hoketsoe ka mokhoa o sireletsehileng ho litheminale tse nepahetseng.
Sephetho sa tahlehelo ea matla ha se sebetse.	• Netefatsa hore lithapo tsa ho lahleheloa ke matla li kopana le lipehelo 'me li hoketsoe ka mokhoa o sireletsehileng ho litheminale tse nepahetseng.
Li-relay tsa Foromo ea C ha li fetole linaha.	Sebelisa meter ea volt ho hlahloba boemo ba li-relay. Netefatsa hore moamoheli o fumana matla a lekaneng ho fihlela litlhoko tsa motlakase. Sheba lenaneo ho etsa bonnete ba hore u na le nomoro ea lintlha e khethiloeng ho relay e loketseng.

Litlhaloso

• UL e lumellanang pheta-pheta, li-transmitters: EN5040-T, EN1215EOL, EN1215WEOL, EN1223D, EN1235SF, EN1235DF, EN1244, EN1245, EN1249, EN1261HT.
• Litekanyo tsa bolulo: 6.54" x 3.62" x 1.05" (166.1mm x 91.9mm x 26.67mm).
• Boima ba 'mele: 215g (7.6oz).
• Tikoloho ea ts'ebetso: 32-140 ° F (0 ° -60 ° C), 90% ea mongobo o lekanyelitsoeng, o sa fokotseng.
• Tlhokahalo ea matla: 11-14 VDC; 400 mA.
• Litlhaloso tsa sephetho: Foromo ea C relay 1A @ 28 VDC, 0.5 @ 30 VAC relay load.
• Litlhaloso tsa ho kenya: Tlase ke ka tlase ho .5 V; e phahameng e kholo ho feta 2.5 V. Seta hape: Ho koala ha puisano, ho fokotseha ha nakoana.
• Mofuta oa moamoheli: Maqhubu a ho tsubella khafetsa.
• Khafetsa ea ho sebetsa: 902-928 MHz (USA) 915-925 MHz (AUS) 921-928 MHz (NZ).
• Tamper: Mofuta oa B, sesebelisoa se tsitsitseng.
• Palo ea lintlha/Li-transmitter: 16.
• Palo ea liphetho: Liphetho tse ts'eletseng tsa Foromo ea C.
• Bokhoni ba ho boloka nalane ea ketsahalo: Liketsahalo tse 50 (ea pele, ea pele). Litifikeiti tsa taolo: Boemo ba Tšireletso 1 CAN/ULC S304:2016, UL 985, UL 1023, UL 2610.

Tlhokomeliso: Li-Inovonics li tšehetsa ho sebelisoa hape ha ho khoneha. Ka kopo, sebelisa hape likarolo tsena u sebelisa mochini o netefalitsoeng oa lisebelisoa tsa elektroniki.

Litlhoko tsa UL

• Phanele ea taolo e tlameha ho hlophisoa ho bonts'a alamo haeba sistimi e le maemong a hlometseng 'me ho hlaha lets'oao la RF ho moamoheli.
• Moamoheli tamper le transmitter tamper e ke ke ea kopanngoa ka loop e le 'ngoe.
• Karolo ea taolo e fanang ka matla a ho kenya ho moamoheli ha ea tlameha ho ba le mefuta e mengata e ka ntle ho 11-14 VDC.

Tšitiso ea thelevishene le seea-le-moea

Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
• Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

FCC Karolo ea 15 le Tumellano ea Boqapi, Saense le Ntlafatso ea Moruo Canada (ISED).

Sesebediswa sena se dumellana le karolo ya 15 ya Melao ya FCC, le maemo a RSS a sa kgetheng laesense ya ISED. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

1. Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso, le
2. Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e ka bakang ts'ebetso e sa rateheng ea sesebelisoa.

Tlhokomeliso: Liphetoho kapa litokiso tse sa amoheloeng ka ho hlaka ke mokha o ikarabellang bakeng sa tsamaiso li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
Tlhokomeliso: Inovonics e rekisa lihlahisoa tse sebelisang software e bulehileng ea batho ba bang. Ho fumana lintlha tse ling, ka kopo etela: https://www.inovonics.com/support/embedded-third-party-licenses/

Litokomane / Lisebelisoa

Inovonics EN4216MR 16 Zone Multi Condition Receiver e nang le liphetho tsa phetisetso. [pdf] Buka ea Mong'a EN4216MR 16 Zone Multi Condition Receiver E Nang le Liphello tsa Relay, EN4216MR, 16 Zone Multi-Condition Receiver e nang le Lipoelo tsa Phetiso, Moamoheli ea nang le Lipoelo tsa Phetiso, Ka Lipoelo tsa Phetiso, Lipoelo.

Litšupiso

• Bukana ea Mosebelisi