INKBIRD ITC-306A WIFI Temperature Controller Manual

E tšehetsa ho bala ha Celsius le Fahrenheit
Dual display window for simultaneous display of measured temperature and stop heating temperature
Dual temperature probes to ensure the accuracy of the water temperature

Tekanyo ea mocheso
Alamo ea mocheso o phahameng le o tlase
Lekola alamo e sa tloaelehang
Continuous heating time alarm

03 Tekheniki Parameters

Model: ITC-306A
Lebitso la lebitso: INKBIRD
Input: 230Vac 50Hz IOA/2300WMAX
output: 230V ac 50Hz IOA/2300W (total two receptacles) MAX
Disconnection means: Type 1 B
Tekanyo ea tšilafalo: 2
E lekantsoe tšusumetso voltage: 2500v
Ketso e iketsang: Lipotoloho tse 30000
Type of temperature probe: R256C-10Knt1% ROC-26.74—27.B3Kn
Temperature control range: 0.06C-45.OV32.O’F-113’F
Temperature measurement range: 40. CC—I OffC/-40.00F—21TF
Temperature display accuracy: O. 1 1
Temperature measurement accuracy: FIG 1 Technical Parameters
Display unit: Celsius oc or Fahrenheit OF
Thempereichara ea tikoloho:
Sebaka sa polokelo:
Temperature: OOC-600C/320F-1400F;
Humidity: (Umfrozen or condensation state)
Warranty: Controller 2 years, probe 1 year

04 Technical Assistance and Warranty

4.1 Thuso ea Theknoloji

If you have any problems installing or using this controller, please refer to the instruction manual for guidance. If you require further assistance, please email us at support@inkbird.com. We will reply within 24 hours, Monday to Saturday. Alternatively, you can visit our official websaete (www.inkbird.com) to find answers to common technical questions.

4.2 Tiisetso

INKBIRD TECH CO„ LTD warrants this controller (one year for the temperature probe) against defects caused by INKBlRD’s workmanship or materials for two years (one year for the temperature probe) from the date of purchase, provided it is operated under normal conditions by the original purchaser (not transferable). This warranty is limited to the repair or replacement (at INKBlRD’s discretion) of all or part of the controller.

Karolo ea 2

01 Phanele ea Taolo

02 INKBIRD APP Setting

2.1 Khoasolla APP
Search the keyword ” INKBIRD ” in Appstore or Google Play, or scan the following QR code to download and install the APP.

2.2 Amahanya le fono ya hao
6) Open the app, it will ask you to register or log in your account on the APP.
Select the country and enter your email to finish the registration. Then press “Add Home” button to create your home.

Kenya sesebelisoa khokahanong e potlakileng:

Hokela sesebelisoa ka har'a sokete 'me u netefatse hore sesebelisoa se ho Smartconfig.
Boemo ba tlhophiso (letšoao la LED lea benya, karohano e benya 250ms). Tobetsa "Tiisa sesupo ka potlako" ebe u khetha marang-rang a Wi-Fi, kenya phasewete ea Wi-Fi, tobetsa "netefatsa" ho kenya ts'ebetso ea khokahano.

Sesebelisoa se ts'ehetsa feela router ea Wi-Fi ea 2.4GHz.

Kenya sesebelisoa ka mokhoa oa AP:

Plug the device in the socket and make sure that the device is in the AP Configuration State (the LED symbol is flashing slowly, interval flashing 1500ms).
Tobetsa "Tiisa sesupo butle butle" ebe u khetha marang-rang a Wi-Fi, kenya password ea Wi-Fi, tobetsa "netefatsa" ho kenya ts'ebetso ea khokahano.

Press “Connect now” and it will go to your WLAN Setting in your smart phone, select the “SmartLife-XXXX” to directly connect to the router without putting in password.
Khutlela ho app ho kena ka mokhoa o itekanetseng oa khokahanyo.

03 Controlling Function Description

Tlhaloso ea Button

3.2 Chate ea Phallo ea Litlhophiso tsa Menu

3.3 Ho Fetola Litlhophiso

3.4 Control Function Description
When the controller is working normally, the controller will automatically select the smaller temperature value of the two settings TSI and TS2 to start the heating, and will stop heating when the temperature reach the larger one (the minimum absolute value of TSI and TS2 is 0.3 oc or 0.50F), PV displays the current temperature measurement value, and the SV displays the temperature at which heating stops.

3.5 High/Low Temperature Alarm (AH, AL)
When measured temperature zthe setting value of high temperature AH, it will alarm and turn off heating output. The screen will rotate to current temperature, buzzer will “bi-bi-Biii”, until the temperature AH, buzzer will be off and return to normal display and control. Or press any button to only turn the buzzer alarm off.

When measured temperature the setting value of low temperature AL, it will alarm. The screen will rotate to display” AL “and current temperature, buzzer will “bi-bi-Biii”, until the temperature AL, buzzer will be off and return to normal display and control. Or press any button to only turn the buzzer alarm off.
High and low temperature alarm will be pushed to mobile APP and remind the customer that the product is in alarm state.

3.6 Continuous Heating Time Alarm (CT)
When measured temperature the starting heating temperature, the output control is turned on. If the continuous heating time arrives, but the measured temperature has not risen to the stop heating temperature, at this time the heater is abnormal or the probe is abnormal, and the output is forcibly tumed off. PV will show E5, the buzzer keeps ringing, and the alarm status is pushed to the mobile APP to remind the customer that the product is in an alarm state and need to check in time.

When CT O, it means that the continuous heating alarm function has been cancelled.

3.7 Temperature Correction (CA)
When the measured temperature deviates from the standard temperature, the temperature calibration function can be used to calibrate the measured value consistent with the standard value. The calibrated temperature : the measured temperature value + the calibration value.

3.8 Fahrenheit or Celsius Seting (CF)
Support setting Fahrenheit or Celsius. The default temperature unit is Fahrenheit. If you need to display the unit in Celsius, please set the CF to C and note that when the CF is changed , all setting values will be restored to the default setting and the buzzer will beep once.

04 Abnormal Situation

4.1 Abnormal Temperature
The temperature difference between the two temperature probes is greater than or equal to 30C/50F

4.2 Probe Abnormal
Either the probe is not plugged in properly,or there is a short circuit inside or inside the probe.

Hlokomela:
When the product is abnormal, the PV will show as follows:
Er: Both probes have problems at the same time
El or E2: Temperature Probe Abnormal
E4: The temperature difference between the two temperature probes is greater than or equal to 30C/5.00F
E5: Continuous Heating Time Alarm

05 APP

06 Tlhokahalo ea FCC

liphetoho kapa litokiso tse sa amoheloang ka ho hlaka ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa thepa.

Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC.
Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

(1) sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi, le
(2) sesebelisoa sena se tlameha ho amohela tšitiso leha e le efe e amoheloang, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.

Tlhokomeliso: Sesebelisoa sena se lekiloe mme ho fumanoe hore se latela moeli oa sesebelisoa sa dijithale sa Class B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka ts'ireletso e utloahalang khahlano le tšitiso e kotsi moahong oa bolulo. Sesebelisoa sena se hlahisa, se sebelisa ebile se ka hlahisa matla a maqhubu a seea-le-moea, 'me haeba se sa kengoa le ho sebelisoa ho latela litaelo, se ka baka tšitiso e kotsi likhokahanong tsa seea-le-moea. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala ts'ebetsong e itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi kamohelong ea seea-le-moea kapa ea thelevishene, e ka khetholloang ka ho tima lisebelisoa, mosebelisi o khothaletsoa ho leka ho lokisa tšitiso ka e 'ngoe ea mehato e latelang:

Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
Eketsa karohano pakeng tsa thepa le moamoheli.
Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a FCC e behiloeng bakeng sa tikoloho e sa laoleheng. Thepa ena e lokela ho kenngoa le ho sebetsoa ka sebaka sa bonyane 20cm pakeng tsa radiator le 'mele oa hau. Transmitter ena ha ea tlameha ho ba sebakeng se le seng kapa ho sebetsa mmoho le antenna kapa transmitter efe kapa efe.

07 Temoso ea IC

This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
(1) Sesebelisoa sena se kanna sa se sitise.

(2) Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.
Sesebediswa se kopana le mokgelo ho tswa ho meedi ya ditlhahlobo e tlwaelehileng karolong ya 2.5 ya RSS 102 le ho dumellana le RSS-102.
Ho pepeseha ha RF, basebelisi ba ka fumana leseli la Canada mabapi le ho pepeseha le ho latela melao ea RF.

Transmitter ena ha ea lokela ho ba sebakeng se le seng kapa ho sebetsa mmoho le antenna kapa transmitter efe kapa efe.
Thepa ena e lokela ho kenngoa le ho sebetsoa ka sebaka sa bonyane ba 20 cm pakeng tsa radiator le 'mele oa hau.

08 Tataiso ea ho rarolla mathata

Shenzhen Inkbird Technology Co., Ltd.
support@inkbird.com
Morekisi: Shenzhen Inkbird Technology Co., Ltd.
Aterese ea Ofisi: Kamore ea 1803, Mohaho oa Guowei, No.68 Guowei Road,
Sechaba sa Xianhu, Liantang, Setereke sa Luohu, Shenzhen, Chaena
Moetsi: Shenzhen Lerway Technology Co., Ltd.
Factory Address: Room 501, Building 138, No. 71, Yiqing Road, Xianhu
Community, Liantang Street, Luohu District, Shenzhen, China

Bala haholoanyane ka Bukana ena & Khoasolla PDF:

Litokomane / Lisebelisoa

INKBIRD ITC-306A WIFI Temperature Controller [pdf] Bukana ea Mosebelisi
306A, 2AYZD-306A, 2AYZD306A, ITC-306A WIFI Temperature Controller, ITC-306A WIFI, Temperature Controller, Controller

Litšupiso

Bukana ea Mosebelisi