ICM450A & ICM450A PLUS +
Programmable 3-Phase Line Voltage Bahlahlobisisi
TATAISO EA HO KENYA, HO SEBELISA LE HO SEBELISA

Bakeng sa tlhaiso-leseling e batsi ka mefuta ea rona e felletseng ea lihlahisoa tse entsoeng Amerika - hammoho le litšoantšo tsa wiring, malebela a ho rarolla mathata le tse ling, re etele ho www.icmcontrols.com

LIEKETSENG TS'OANELO

Kenyo:

• Mohala voltage: Universal, 190-600 VAC
• Maqhubu: 50/60 Hz
• Taolo voltagE: 18-240 VAC
• Tlhokomelo ea lehlakoreng la mojaro: Taba ea boikhethelo

Sephetho:

• Mofuta: Relay, SPDT
• Moqtage fapaneng: 277 VAC @ 6A, morero o akaretsang

Ambient Operating Temperature:
-40ºF ho ya +149ºF (-40ºC ho +65ºC)
Mocheso oa polokelo: -40ºF ho ea +185ºF
(-40ºC ho +80ºC)
Mechini:

• Ho hloella: Ho qhoaela holim'a metsi ho sebelisoa (2) #8 li-screw
• Liphello: 1/4 "lihokelo tse potlakileng
• Boima: ligrama tse 12 (ligrama tse 341)

ModBus:

• Puisano ea RS485 (ICM 450A PLUS+)
• Node ID: 175
• Sekhahla sa Baud: 9600
• Emisa likotoana: 2
• Parity: ha ho letho
• Lintlha tsa data: 8
  ** HLOKOMELA: Litlhophiso tsena li ke ke tsa fetoloa.

Boholo: 6.5 "L x 4.75" W x 1.09 "D

LIEKETSENG

Mohala Voltage: Universal 190-600 VAC
Tšireletso ea Mokhahlelo oa ho se leka-lekane: 2-20%
fetohang
Over/Under Voltage Tshireletso:

• Tlas'a Voltage: 2-25% fetohang
• Ho feta Moqtage: 2-25% fetohang

Tšireletso ea Phase ea Tahlehelo: E lekana le 25% ea lebitso bakeng sa mohato ofe kapa ofe; sisteme e tla koaloa mme phoso e tla ngoloa haeba sena se etsahala
Ho lieha ka nako ea ho senya nako: metsotsoana e 15 ho isa ho metsotso e 10 e ka fetoloa
Taolo VoltagE: 18-240 VAC
Mokhoa oa ho laola: ON/OFF
Ho Liehisoa ha Potso ea Phoso:

• Nako ea ho lieha: 0 ho metsotsoana e 15 e ka fetoloa
• E fana ka tieho lipakeng tsa ho lemoha liphoso le ho koala ha sistimi ho thusa ho felisa maeto a likhathatso kapa ho koala ho sa hlokahaleng.

Seta Mokhoa: 0 (auto) kapa 1-10 e leka hape
Beha Letsatsi le Nako: E fana ka nako ea sebele ea nako ea letsatsi le nako stamp (ICM450A PLUS+)
Puo: Beha puo ea Senyesemane kapa Sepanishe bakeng sa pontšo
TLHOKOMELO!
Ho kenya ICM450A le ICM450A PLUS+ ho tla etsoa ke litsebi tse koetlisitsoeng feela. Khomarela likhoutu tsohle tsa motlakase tsa lehae le tsa naha. Tlosa matla ohle ho sistimi pele o etsa likhokahano.

KEKETSO

1. U sebelisa li-screw (2) #8, beha ICM450A le ICM450A PLUS+ sebakeng se phodileng, se omeletseng, se fumanehang habonolo phanele ea taolo.
2. Hokela voltage joalokaha ho bontšoa ho Setšoantšo sa 1 (ka tlase). Tlohela moleng o teng mme o jare likhokahano tsa lehlakore li tiile ho sehokelo.
3. Tlhokomelo ea lehlakore la mojaro ke boikhethelo (yuniti e ka sebelisoa ho beha leihlo lehlakore la mohala feela). Wire contactor le boikhethelo taolo voltage beha leihlo joalo ka setšoantšong sa 2.
   Hlokomela: Khoele ea mojaro/ea mohala e tlameha ho lekanyetsoa bakeng sa voltagke sebelisitse. Se ke oa sebelisa terata e nyane ho feta 20 AWG.
4. Kamora ts'ebeliso ea matla, ICM450A le ICM450A PLUS+ li tla ba teng 'me li tla qala ho beha sistimi leihlo.

* Mosebelisi a ka kenya 1 AMP li-fuse tse ka har'a marang-rang tse lekantsoeng ka matla a kenyelletsoeng a sebelisitsoengtage ho likhokahano tsa mahlakoreng a mela.

• Li-terminals 4 le 5 ke liteishene tsa ho kenya lets'oao la taolo
• "Mokhoa oa Taolo" oa buloa kapa oa TLOA ha ho seta
• Ha "Control Mode" e setetsoe ho "ON," ho tlameha ho ba le molumotage teng ho litheminale 4 le 5 bakeng sa litheminale tsa relay 1 le 2 ho koala; voltage ka fanoa ho tsoa ho thermostat, switch switch, joalo-joalo.
• Ha voltagE ho li-terminals tsena e sebelisoa hape, yuniti e ke ke ea fana ka matla hape ho fihlela tieho ea khefu (metsotsoana e 15- metsotso e 10) e fetile.
• Tšebeliso ea li-terminals 4 le 5 ke boikhethelo; li tla hlokomolohuoa haeba "Mokhoa oa Taolo" o behiloe ho "OFF"
• Li-terminals 1 le 2 li "omile," hangata li bula mabitso
• Litheminale tsa 1 le 2 li koetsoe ha motlakase o le ka har'a maemo a boletsoeng
• Litheminale tsa 1 le 2 lia buleha ha ho na le bothata
• Litheminale tsa 1 le 2 lia buleha ha ho lahleheloa ke lets'oao la taolo le nang le "Mokhoa oa Taolo" o behiloeng ho "ON"

Tlhokomeliso 1: Litheminale 6, 7 le 8 tse sebelisoang bakeng sa puisano ea ModBus ho ICM450A PLUS+.
Tlhokomeliso 2: Tšebeliso ea li-terminals tsa ho hokela kapele tsa basali tse loketseng likhoele tsa masimong tse hlokahalang. Li-terminals tsa basali tse hokelang kapele tse loketseng lifeme-thapo feela ha lia lumelloa.

MODBUS DATA MAPPING QR KHOUTU
Ho fihlella litafole tsa limmapa tsa data tsa MODBUS, SAKA QR khoutu ea ho le letona.

https://www.icmcontrols.com/wp-content/uploads/2021/07/LIAF308-url.pdf

DIN RAIL PHAHAMA MITAELO

1. Lokisetsa poleiti ea seporo ea DIN le masoba a 4 ka morao ho ICM450A/450A Plus+.
2. Hlakola li-screw tse 'ne # 10 tse fanoeng ka har'a khiti ka masoba a homang a ICM450A/450A Plus+ ho tloha ka holimo 'me u kenelle poleiting e ntseng e hola joalo ka ha u bonoa ho feiga 5.
   ** Boikhethelo ba lisebelisoa tsa seporo sa din se rekisoang ka thoko (Odara: DIN-ICM450A)

ICM450A LE ICM450A PLUS+ LITŠOANTŠISO TSA LIKHOPO

PHETHA LIEKETSENG

1. Tobetsa konopo ea SETUP ho kenya mokhoa oa ho Seta. Seta LED e tla khantša.
2. Sebelisa le le metsu ho fetola liparamente tsa mosebelisi.
3. Tsamaisetsa ho seta ka ho tobetsa le ho lokolla konopo ea SETUP.
4. Ha parameter ea ho qetela e se e behiloe, karolelano ea mekhahlelo e tla hlahisoa 'me Setup LED e tla tima ka bo eona.

PHETHA MOHASI
ICM450A PLUS+ e na le sehanyetsi sa kahare sa terminator se ka khonang ho nolofalloa kapa sa holofatsoa ha se seta.

MESEBETSI LETS'ELA

Tobetsa metsu ho phenya ebe u khetha litlhophiso tsa paramethara ea mosebelisi ka mokhoa oa ho Seta. HLOKOMELA hore u fetole kapele.
Tobetsa ho kenya Setup mode ebe u khetha li-parameter tsa mosebelisi
Tšoara voltage bonts'a a b, bc, a c (ka nako e le nngwe).
Moqtage Bala Calibration
Tšoara likonopo tsa UP & Down ka nako e le 'ngoe ho kenya mokhoa oa ho lekanya (Fault and Setup LEDs e tla khanya). Tobetsa likonopo tsa Holimo le Tlase ka bonngoe ho fetola molumo oa pontšotage ho lumella metsotsoana e seng mekae pakeng tsa likhatiso bakeng sa voltage karolelano. Tobetsa BALA ho tsoa le ho boloka litekanyo.

LIEKETSENG

Paramethara	Tlhaloso	Range	Ea kamehla	E khothalelitsoe
Mohala Voltage	Karolelano ea mohato ho isa moleng oa voltage	190-600	208	Nameplate Moqtage
Ho lieha ho Khutla	Nako ea nako lipakeng tsa ho theola matla le ho matlafatsa hape	15 - metsotsoana e seng mekae	25 metsotsoana	Metsotso e 4**
Ho lieha ho Phoso	Nako ea nako pele mojaro o tima ka lebaka la phoso e seng ea bohlokoa *	o-25 metsotsoana	25 metsotsoana	7-8 metsotsoana**
% Ho Feta/Ka Tlas'a Moqtage	Boholo/bonyane ba mohato ho isa ho palohare ya karolotage, ka ho latellana	2-25%	2o%	12-15%**
% Ho se leka-lekane ha Mokhahlelo	Chelete e lumelletsoeng voltage se leka-lekane	2-2o%	2o%	4-5%
Seta Mokhoa	o (auto) kapa makhetlo a mangata moroalo o ka matlafatsoa hape kamora phoso ea lehlakore la mojaro pele ho hlokahala	o (auto) , 1-ho	o (auto)	o (auto)
Mokhoa oa ho laola	Ka mokhoa oa taolo o behiloeng ho OFF, mojaro o tla matlafatsa haeba ho se na maemo a phoso a 3-mohato; ka mokhoa oa ho laola ON, mojaro o tla matlafatsa haeba ho se na maemo a phoso le ho laola voltage teng ho li-terminals 4 le 5 tsa ICM450A	ON kapa TIMA	TLOA	E ipapisitse le wiring
Letsatsi le Nako	E fana ka nako ea sebele ea nako ea letsatsi le nako stamp (mefuta ea ICM450A PLUS+)	ON kapa TIMA	ON	ON
Puo	Beha puo ea Senyesemane kapa Sepanishe bakeng sa pontšo	EN kapa SP	EN	Senyesemane
485 Pheliso	E dumella mosebedisi ho bulela sehanyetsi sa ka hare sa tennination	Ee kapa che	NO
MODBUS ID-1	Sebelisa MODBUS ID e khethiloeng	1 - 247	175

* Liphoso tseo e seng tsa bohlokoa ke liphoso tse kang high/low voltage le mokhahlelo o sa leka-lekanang 'me o tlas'a tieho ea ho beha phoso. Liphoso tse tebileng, tse kang ho lahleheloa ke karolo le ho fetoha ha karolo, ha li lumelle ho botsa lipotso le nako ea ho arabela (tlas'a metsotsoana ea 4) ha e lokisoe ke mosebedisi.
** Bakeng sa likhothaletso tse ntle, ikopanye le moetsi oa lisebelisoa.

MOLATO MAEMO
Tobetsa le ho lokolla konopo ea phoso ho tsamaisa liphoso tsohle tse bolokiloeng.
Hlokomela: Bakeng sa ho seta qalong, tobetsa o hatelle FAULT metsotsoana e 5 ho tlosa liphoso tse bolokiloeng pele.

Phoso	Bothata	Ketso ea ho Lokisa
Morao Phase Tahlehelo	Ha se mekhahlelo e meraro e lehlakoreng la mojaro e teng	t. Kenya matla bocha. 2. Haeba phoso e hlaha hape ka mor'a hore mojaro o matlafatse: a. Tima matla ohle b. Sheba likhokahano tsohle tsa mahlakoreng a thepa c. Sheba mabitso a contactor bakeng sa maloanlahla kapa carbon feteletseng.
Morao Mokhahlelo Rev	Meroalo 1, 2, kapa 3 ha e ea tatellano (ha e suthisoe ka karolo ea 120)	ke. TIMA matla ohle. 2. Fapanya mekhahlelo efe kapa efe e 2 ka lehlakoreng la mojaro la 1061450A le ICM450A PLUS+ feela (ex.ample: swap load land load z)' 3. Kenya matla hape.
Morao Phase Unbalance	Voltage ho se leka-lekane pakeng tsa mekhahlelo e meraro ea mojaro ho feta sebaka sa ho se leka-lekane	I. Tobetsa konopo ea BALA ho hlokomela boima ba hona joaletages. Sheba tsamaiso bakeng sa sesosa sa ho se leka-lekane. 2. Eketsa nako ea ho hlongoa lipotso ha ho hlokahala. 3. Eketsa lipesente tse sa leka-lekaneng haeba ho hlokahala.
Front Over Voltage	Karolelano ea mohato ho isa mohatong oa voltage feta palo e kholo ea liperesentetage	ke. Hlahloba tsamaiso bakeng sa over-voltagke sesosa. 2. Eketsa peresente ho feta-voltage beha haeba ho hlokahala. 3. Eketsa nako ea ho hlongoa lipotso ha ho hlokahala.
Tahlehelo ea Phase e ka Pele	Ha se mekhahlelo e meraro e lehlakoreng la mola e leng teng	ke. Tobetsa 'me u hatelle konopo ea BALA holim'a sehlahlo sa mohato kapa u sebelise voltmeter ea AC ho lekanya ka hloko mekhahlelo eohle e meraro ho ea ho phase line vol.tages (mohlalaampLe: Line t+Mola oa 2, Mola oa 2 * Mola oa 3, Mola oa 3. Mola i). 2. Lokisa karolo e sieo.
Phetoho ea Phase e ka Pele	Mela ea i, 2, kapa 3 ha e tatellane (eseng 12132 phased shifted)	ke. TIMA matla ohle. 2. Fetola mekhahlelo efe kapa efe e 2 lehlakoreng la mohala oa ICM450A le ICM450A PLUS+ (ex.ample: swap Liner le Line 2)* 3. Kenya matla hape.
Front Phase Unbalance	Voltage ho se leka-lekane pakeng tsa mekhahlelo e meraro ea mela e fetang sebaka sa ho se leka-lekane	ke. Tobetsa konopo ea BALA ho shebella boima ba hona joaletages. Sheba tsamaiso bakeng sa sesosa sa ho se leka-lekane. 2. Eketsa nako ea ho hlongoa lipotso ha ho hlokahala. 3. Eketsa lipesente tse sa leka-lekaneng haeba ho hlokahala.
Front Under Voltage	Karolelano ea mohato ho isa mohatong oa voltage e ka tlase ho bonyane liperesentetage	ke. Hlahloba tsamaiso bakeng sa under-voltagke sesosa. 2. Eketsa liphesente tse under-voltage beha haeba ho hlokahala. 3. Eketsa nako ea ho hlongoa lipotso ha ho hlokahala.

HO BATLE PHOSO

Bothata	LCD e baliloe	Boemo ba LED	Ketso ea ho Lokisa
Mojaro o ke ke oa fana ka matla	Karolelano ea Mokhahlelo	Leseli tsohle li tlohile	Netefatsa hore tlhahiso ea taolo (li-terminals 4 & 5) e hokahane hantle ebile e hlophisitsoe
Mojaro o ke ke oa fana ka matla	Karolelano ea Mokhahlelo	Tlosa LED, Phoso ea ho panya ha LED	Tobetsa FAULT hang ho boloka phoso ea hona joale; lokisa boemo ba phoso ea pele e hlahang (sheba Fault Conditions ka holimo, bakeng sa lethathamo la liketso tsa tokiso)
Fault LED e panya khafetsa ha mojaro o matlafalitsoe	Karolelano ea Mokhahlelo	Fault LED Blinking, Laela LED On	E bontša hore ho na le liphoso tse bolokiloeng mohopolong, tobetsa FAULT ka potlako ho tsamaisa liphoso tse bolokiloeng; ho hlakola liphoso, tobetsa 'me u tšoare FAULT ho feta metsotsoana e 5
Mojaro o ke ke oa fokotsa matla ha taolo voltage TIMA	Karolelano ea Mokhahlelo	, Laela LED On Laola LED Off	Boemo ba mokhoa oa ho laola bo TIMA; tobetsa SETUP ho fihla mokgweng wa taolo. Tobetsa r• ho seta mokgwa wa taolo HO BULWA
LED ea setup e ntse e bulehile ha ho ntse ho buloa ho matlafatsoa	Ntho efe kapa efe ntle le Karolelano ea Mokhahlelo	Seta LED On, Laela LED On	Ho tsoa mokhoeng oa ho seta, tobetsa BALA kapa FAULT
Mojaro o ke ke oa fana ka matla	Seta bocha	Phoso ea ho panya ha LED	Yuniti e notletsoe, palo e kholo ea ho leka hape ka mokhoa oa ho seta bocha e fihletsoe. Ho seta taolo botjha, ntsha le ho seta matla taolong.
Mojaro o bulela le ho TIMA kgafetsa	E bontša Phoso e teng	Phoso ea ho panya ha LED	Lokisa phoso ea lehlakore la mojaro; tobetsa FAULT ho hlokomela boemo; tieho ea nako ea khefu e ka 'na ea e-ba khutšoanyane haholo; tobetsa SETUP ho kenya tieho ka mokhoa oa khefu; tobetsa /*\ ho lelefatsa tieho
Litlhaku tse khokhothetsoeng kapa tse ntšo mabokose a skrineng sa LCD	E sa baleheng	Leha e le efe	processor kapa memori e senyehile. Fetola taolo ea 1CM.
Yuniti ha e boloke mosebelisi litlhophiso tsa letsatsi le nako			Tlohela yuniti e hoketsoe motlakaseng bonyane metsotso e 30 ho tjhaja betri e ka tjhajoang ka hare e ka bang tlase

HLOKOMELA: Ka kopo, tlohela ICM450A PLUS+ e hoketsoeng motlakase oa methapo e 3 bonyane metsotso e 30 pele u lebella letsatsi le nako.amp ho tshoara mohopolong

TIISETSO EA LIMITED YA SELEMO

Morekisi o fana ka tiisetso ea lihlahisoa tsa eona khahlano le bofokoli ba thepa kapa moetso oa nako ea selemo (1) ho tloha ka letsatsi la tlhahiso. Boikarabello ba Morekisi bo lekanyelitsoe, ka boikhethelo ba bona, ho lokisa, ho khutlisa kapa ho fana ka mokoloto oo e seng oa nyeoe bakeng sa litheko tsa theko ea thepa e fanoeng e le e nang le phoso. Tiisetso le litlhareso tse boletsoeng mona ha li sebetse thepa efe kapa efe kapa likarolo tse 'nileng tsa sebelisoa hampe ho kenyeletsoa ts'ebeliso efe kapa efe kapa kopo e khahlanong le litaelo tsa Morekisi, ho hlokomolohuoa, t.ampering, polokelo e fosahetseng, ho kenya ts'ebetso e fosahetseng kapa litšebeletso tse sa etsoang ke Morekisi. E le ho lumella Morekisi ho tsamaisa tiisetso ka nepo, Moreki o tla:

1. Tsebisa Morekisi hang-hang mabapi le tseko efe kapa efe, ho fana ka tlhaiso-leseling ea khoutu ea letsatsi kapa lintlha tse ling tse bohlokoa joalo ka ha a kopuoa ke Morekisi.
2. Lumella Morekisi ho hlahloba le ho lekola sehlahisoa seo ho thoeng ha se na phoso. Lintho tseo ho thoeng ha li na phoso 'me li khethoa ke Morekisi hore ha li na sekoli li tla lefisoa $30.00 ka tefo ea tlhahlobo ea hora. Tiisetso ena e akaretsa boikarabelo ba Morekisi a le mong katlase mona 'me e boemong ba tiisetso efe kapa efe e boletsoeng, e boletsoeng, kapa e molaong. Ntle le ha ho boletsoe ka tsela e 'ngoe, Morekisi ha a fane ka tiisetso ea hore thepa e bontšitsoeng kapa e hlalositsoeng mona e loketse morero ofe kapa ofe.

 

7313 William Barry Blvd., North Syracuse, NY 13212
www.icmcontrols.com
Patent No. 424,953

Litokomane / Lisebelisoa

	ICM CONTROLS ICM450A PLUS Programmable 3-Phase Line Voltage Bahlahlobisisi [pdf] Buka ea Taelo ICM450A, ICM450A PLUS, ICM450A PLUS Programmable 3-Phase Line Vol.tage Monitors, ICM450A PLUS, Programmable 3-Phase Line Voltage Monitors, 3-Phase Line Voltage Monitors, Line Voltage Bahlahlobi, Moqtage Bahlahlobisisi, Bahlahlobisisi
	ICM CONTROLS ICM450A PLUS+ Programmable 3 Phase Line Voltage Bahlahlobisisi [pdf] Tlhophiso Tataiso ICM450A, ICM450A PLUS, ICM450A PLUS Programmable 3 Phase Line Voltage Monitors, ICM450A PLUS, Programmable 3 Phase Line Voltage Monitors, 3 Phase Line Voltage Monitors, Line Voltage Bahlahlobi, Moqtage Bahlahlobisisi, Bahlahlobisisi

Litšupiso

• Bukana ea Mosebelisi