iBoard IB-361C Running Boards Nerf Bars Side
Tlhahisoleseding ya Sehlahiswa
Litlhaloso
- Nomoro ea Karolo: IB-361C&H
- Boima bo boholo: 6mm, 8mm, 10mm, 12mm, 14mm
- Torque e tiisang (ft-lbs): 6-7, 16-18, 31-32, 56-58, 92-94
LBH
P: Na ho na le lisebelisoa tse khethehileng tse hlokahalang bakeng sa ho kenya?
A: Ha ho hlokahale ho cheka bakeng sa ho kenya. Lisebelisoa tsa mantlha tse kang screwdriver le wrenches li khothaletsoa bakeng sa kopano.
P: Ke lokela ho etsa eng haeba ho na le likarolo tse sieo sephutheloaneng?
A: Pele o qala ho kenya, etsa bonnete ba hore likarolo tsohle tse thathamisitsoeng bukeng ea tataiso li teng. Haeba ho na le likarolo tse sieo, ikopanye le tšehetso ea bareki ho info@iboardauto.com bakeng sa thuso.
BALA LITAELO KA HLOKO PELE U QALA HO KENYA. TLOSA LITENG HO TSOA LEbokosong, 'me u tiise hore likarolo tsohle li teng. THUSO KHOTHATSO.
* ROCKER PANEL THABA
* HA HO SEBELE HO HLOKAHALA
| Boholo ba Fastener | Torque e tiisang (ft-lbs) | Ho hlokahala |
| 6 limilimithara | 6-7 | X |
| 8 limilimithara | 16-18 | √ |
| 10 limilimithara | 31-32 | √ |
| 12 limilimithara | 56-58 | X |
| 14 limilimithara | 92-94 | X |
LENANE LA KAROLO
Liphutheloana tsa Hardware
| Sephutheloana sa Hardware A (Bakeng sa ho Kenya Bracket) | |||||
| Ntho | QTY | Tlhaloso | Ntho | QTY | Tlhaloso |
| 1# | 5 | Lipoleiti tsa Bolt tsa M10 L | 5# | 9 | Lihlatsoa tsa M10 tse bataletseng |
| 2# | 2 | Lipoleiti tsa M10 T Bolt | 6# | 8 | Lisebelisoa tsa M10 Lock |
| 3# | 7 | Lisebelisoa tsa polasetiki tsa M10 | 7# | 8 | M10 Hex Nuts |
| 4# | 1 | M10X1.5-30mm Hex Bolts | |||
|
|
|||||
| Sephutheloana sa Hardware B (Bakeng sa Kemiso ea Bohato ba Bohato ba Stainless Steel) | |||||
| Ntho | QTY | Tlhaloso | Ntho | QTY | Tlhaloso |
| 1# | 12 | M8X1.25-35mm Koloi Liboutu | 3# | 12 | M8 Nylon Lock Nuts |
| 2# | 12 | Li-washer tse kholo tsa M8 | 4# | 6 | Li-slider (tse Pakiloeng ka Mehato ea Mehato) |
 |
|||||
Taelo ea Tlhophiso
MOHATO 1
Qala ho kenya ho tloha lehlakoreng la bapalami ka pele ho koloi. Fumana masoba a fektheri ka tlase ho phanele ea fatše, (setšoantšo sa 1). TLHOKOMELISO: Libaka tsa ho hlongoa li ka koaheloa ka sealant kapa undercoating. Sebelisa screwdriver e nyane ho phunyeletsa sealant ho bula lesoba.
BOHLOKOA: Masakana a tlameha ho lula a bataletse khahlano le letlapa la tšepe. Haeba ho hlokahala, tlosa sekoahelo kapa sekoaelo se ka tlas'a metsi se koahelang libaka tsa ho beoa holim'a phanele ea 'mele pele u kenya Li-Brackets.
MOHATO 2
Khetha (2) M10 L Bolt Plates (2) M10 Plastic Washers. Hlatsoa ka mokhoa o sa fellang oa Lihlatsoa tsa Plastiki holim'a Lipoleiti tsa Bolt tsa M10 L. Kenya Lipoleiti tsa Bolt tsa M10 L tse nang le Lisebelisoa tsa Plastiki ka har'a masoba a ka pele, (Setšoantšo sa 2). Hlakola Washer ea polasetiki fatše ka thata khahlanong le phanele ea fatše. Washer ea Plastiki e etselitsoe ho tšoara Bolt Plate sebakeng sa eona nakong ea ho kenya Bracket.
HLOKOMELA: Tšoara Bracket ea Passenger Front Mounting (PFM) ho ea sebakeng se ka pele ho thusa ho fumana masoba a nepahetseng.
MOHATO 3
Hokela Bracket ea Bapalami ka Pele (PFM) ho Lipoleiti tsa Bolt tse kentsoeng (2) M10 L tsa Bolt tse nang le (2) M10 Flat Washers, (2) M10 Lock Washers le (2) M10 Hex Nuts, (Fig 3 & 4). U se ke ua tiisa ka botlalo hardware ka nako ena.
MOHATO 4
Tsamaea ho ea Setsing sa Phalliso sa Baeti, (setšoantšo sa 5). Fumana sekotjana se seholo ka holim'a phala ea mopalami, (setšoantšo sa 5).
Ka mor'a moo, khetha (1) M10 T Bolt Plate le (1) Plastic Washer. Hlatsoa hanyenyane feela ka Washer ea Plastiki holim'a Plate ea Bolt ea M10 T. Kenya M10 T Bolt Plate e nang le Washer ea Plastiki ka mokoting o ka pele, (Setšoantšo sa 6). Hlakola Washer ea polasetiki fatše ka thata khahlanong le phanele ea fatše. Washer ea Plastiki e etselitsoe ho tšoara M10 T Bolt Plate sebakeng nakong ea ho kenya Bracket.
MOHATO 5
Hokela Setsi sa Bapalami sa Mount Bracket (PCM) ho M10 T Bolt Plate e kentsoeng e nang le (1) M10 Flat Washer, (1) M10 Lock Washer le (1) M10 Hex Nut, (Fig 7). U se ke ua tiisa ka botlalo hardware ka nako ena.
MOHATO 6
Tsamaea ho ea Lehlakoreng la Baeti ba Lehlakoreng la Moemeli ka Morao, (setšoantšo sa 8). Tlosa (2) liboutu tsa hex tsa fektheri (setšoantšo sa 8).
MOHATO 7
Sebelisa hape liboutu tsa (2) tsa fektheri tsa hex ho hokela Bracket ea Passenger Rear Mounting (PRM) sebakeng se ka morao sa ho hlomamisa, (setšoantšo sa 9). U se ke ua tiisa ka botlalo hardware ka nako ena.
MOHATO 8
Hang ha li-brackets tsohle (3) tsa baeti li kenngoe, joale tsoela pele ho kenya mohato oa Mohato. (Setšoantšo sa 10 & 11)
- Khetha (1) Slider le (2) M8X1.25-35mm Bolts ea likoloi;
- Kenya (2) M8X1.25-35mm Liboutu tsa Koloi ho (1) Slider.
- Tsamaisa Selaete (ka liboutu tsa kariki) ho Mohato oa Mohato.
- Pheta ho kenya li-slider tse ling (2) ho bareng ea mohato.
- Hokela Step Bar (ka li-Slider) holim'a masakaneng a kentsoeng. Beha li-Slider ho li-brack-ets tse kentsoeng. Sireletsa Step Bar ho Li-Brackets tse kentsoeng ka ho sebelisa (6) M8 Large Flat Washers le (6) M8 Lock Nuts ea Nylon le (3) Slider, (Fig 11). U se ke ua tiisa ka botlalo hardware ka nako ena.
Tlhokomeliso: Li-Slider li tletse ka Mehato ea Mehato.
Beha boemo 'me u lokise Sebaka sa Mohato 'me u tiise lisebelisoa tsohle ka botlalo.
MOHATO 9
Suthela lehlakoreng la Mokhanni oa koloi. Qala ho kenya ho tloha lehlakoreng la mokhanni ka pele ho koloi. Pheta Mehato ea 1-3 bakeng sa ho kenya Bracket Front Mounting Bracket (DFM).
MOHATO 10
Tsamaea ho Setsi sa Mokhanni sa Mount Location, (setšoantšo sa 12). Fumana lesoba le leholo 'me u tlose polaka ea polasetiki e koahetseng lesoba mocheng oa foreimi, (Setšoantšo sa 12). 'Me joale, Kenya e setseng (1) M10 L Bolt Plate e nang le (1) Plastic Washer le (1) M10 T Bolt Plate e nang le (1) Plastic Washer ka mekoting, (Fig 12).
MOHATO 11
Assemble Driver Center Mounting Bracket (DCM) and Driver Centre Support Bracket (DCS) with (1) M10x1.5-30mm Hex Bolt, (2) M10 Flat Washers, (1) M10 Lock Washer le (1) M10 Hex Nut, ( Setšoantšo sa 13). U se ke ua tiisa ka botlalo hardware ka nako ena.
MOHATO 12
Ka mor'a moo, pheta Mehato ea 4-5 ho kenya Bracket ea Driver Center Mounting e kopaneng (DCM) ho M10 L Bolt Plate e kentsoeng, (Fig 14). Hokela Bracket Center Support Bracket (DCS) ho M10 T Bolt Plate e kentsoeng e nang le (1) M10 Flat Washer, (1) M10 Lock Washer le (1) M10 x 1.5 Hex Nut, (Fig 14). U se ke ua tiisa ka botlalo hardware ka nako ena.
MOHATO 13
Pheta Mehato ea 6-7 bakeng sa ho kenya Bracket Rear Mounting Bracket (DRM).
MOHATO 14
Pheta Mehato ea 8-10 bakeng sa ho kenya lehlakoreng la mokhanni Step Bar. Kemiso e phethetsoe.
Tlhokomeliso
Etsa tlhahlobo ea nako le nako ha u kenya ho etsa bonnete ba hore lisebelisoa tsohle li bolokehile ebile li tiile.
E le ho sireletsa litšepe/liboto tsa hau, ka kopo sebelisa sesepa se bonolo/lihlahisoa tse sa cheng bakeng sa ho hloekisa feela.
Tšehetso ea Bareki: info@iboardauto.com
Litokomane / Lisebelisoa
 |
iBoard IB-361C Running Boards Nerf Bars Side [pdf] Tlhophiso Tataiso IB-361C, IB-361H, IB-361C Running Boards Nerf Bars Side, IB-361C, Running Boards Nerf Bars Side, Boards Nerf Bars Side, Nerf Bars Side, Bars Side |