HORNER AUTOMATION XL Prime Series OCS Prime Controllers

• Sehlahisoa: XL Prime Series
• Mofuta oa Firmware: FW16.10 ho FW17.02 kapa hamorao
• Tšebelisano ea polokelo: Karete ea MicroSD kapa koloi ea USB
• Moetsi Websebaka: Horner Automation

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho hlahloba ntlafatso ea hona joale ea firmware
Ho hlahloba ntlafatso ea firmware ho molaoli:

1. Bula Menu ea Sistimi > View Boemo.

Ho ntlafatsa Firmware bakeng sa XL Prime Series (FW16.10 ho FW16.32)
Latela mehato ena:

1. Khoasolla firmware files ho tloha Horner Automation websebaka.
2. Tlosa zip e jarollotsoeng file.
3. Kopitsa se hlokahalang files/lifoldara bukeng ea motso ea karete ea MicroSD kapa USB drive.
4. Kenya sesebelisoa sa polokelo ho XL Prime OCS.
5. Ntlafatsa firmware u sebelisa e 'ngoe ea mekhoa e fanoeng.

Ho ntlafatsa Firmware bakeng sa XL Prime Series (FW17.02 kapa hamorao)
Latela mehato e latelang:

1. Khoasolla firmware files ho tloha Horner Automation websebaka.
2. Tlosa zip e jarollotsoeng file.
3. Kopitsa zip file ho buka ea motso ea karete ea microSD kapa vUSB drive.
4. Kenya sesebelisoa sa polokelo ho XL Prime OCS.
5. Tsoela pele ka ho ntlafatsa firmware ka mokhoa o nepahetseng.

Ntlafatsa Firmware U sebelisa Menu ea Sisteme
Ho ntlafatsa firmware ho sebelisa Menu ea Sisteme:

1. Kenya karete ea MicroSD / USB ka lifoldara tse nepahetseng tsa firmware ho XL Prime OCS.
2. Tobetsa 'me u tšoare konopo ea Sisteme ho bonts'a skrine ea ho hlaphoheloa ea sistimi.
3. Khetha khetho ea Ntlafatso ea Sisteme ho tsoela pele.
4. Khetha SD Card (A:) kapa USB (B:) bakeng sa ho ntlafatsa firmware mme u latele litaelo.

Sekrine sa Splash se Hlophisehang le Senotlolo sa Slide
O ka ntjhafatsa sekirini sa ho qhekella le konopo ya selaete (e sebetsang ho XLW Prime feela) ho diyuniti tsa OCS Prime ka ho latela ditaelo tse itseng tse fanoeng bukeng.

LBH

• P: Nka ikopanya le tšehetso ea tekheniki joang?
  U ka ikopanya le tšehetso ea tekheniki ka likanale tse latelang:
  • Amerika e leboea: Mohala: 1-877-665-5666, Fax: 317
    639-4279, Web: Horner Automation, Email: techsppt@heapg.com
  • Europe: Mohala: +353-21-4321266, Fax:
  • + 353-21-4321826, Web: Horner Automation Europe,
  • Lengolo-tsoibila: tech.support@horner-apg.com

Firmware Update Manual: Prime Series

Selelekela

Sebelisa litaelo tsena ho ntlafatsa kapa ho fetola firmware ho Horner OCS Prime Controllers.
TLHOKOMELO: Lintlafatso tsa Firmware li lokela ho etsoa feela ha lisebelisoa tse laoloang ke OCS li le boemong bo sireletsehileng, bo sa sebetseng. Lipuisano kapa ho hloleha ha hardware nakong ea ts'ebetso ea ntlafatso ea firmware ho ka etsa hore molaoli a itšoare ka tsela e sa nepahalang e bakang kotsi kapa tšenyo ea thepa. Netefatsa hore mesebetsi ea sesebelisoa e sebetsa ka nepo ho latela ntlafatso ea firmware pele o khutlisetsa OCS mokhoeng oa ts'ebetso.

Mokhoa oa ho lekola ntlafatso ea hajoale ea firmware
Ho sheba ntlafatso ea firmware ho molaoli, bula Menu ea Sistimi > View Boemo.

Ho ntlafatsa Firmware bakeng sa XL Prime Series (FW16.10 ho 16.32)
HLOKOMELA: Sebelisa karete ea karohano e le 'ngoe ea microSD kapa drive ea USB. Ho bohlokoa hore ha ho na karohano ea bootable kapa boot bo amanang files kareteng kapa kganna.

1. Khoasolla firmware files ho tloha Horner Automation websebaka: https://hornerautomation.com/controller-firmware-cscan/
2. Ntša lifoldara ho zip e jarollotsoeng file.
3. Kopitsa tse latelang files/lifoldara bukeng ea motso ea karete ea MicroSD kapa USB drive
4. Kenya karete ea microSD kapa drive ea USB ho XL Prime OCS.
5. Ntlafatsa firmware u sebelisa e 'ngoe ea mekhoa e latelang:
   • Lenaneo la Sistimi
   • Li-Bits tsa Ngoliso ea Sistimi

Ho ntlafatsa Firmware bakeng sa XL Prime Series (FW 17.02 kapa hamorao)
HLOKOMELA: Sebelisa karete ea microSD e hlophisitsoeng e le 'ngoe kapa koloi ea USB. Ho bohlokoa hore ha ho na karohano ea bootable kapa boot bo amanang files kareteng kapa kganna.

1. Khoasolla firmware files ho tloha Horner Automation websebaka: https://hornerautomation.com/controller-firmware-cscan/
2. Ntša lifoldara ho zip e jarollotsoeng file.
3. Kopitsa zip e latelang file bukeng ea motso ea karete ea microSD kapa USB drive
4. Kenya karete ea microSD kapa drive ea USB ho XL Prime OCS.
5. Ntlafatsa firmware u sebelisa e 'ngoe ea mekhoa e latelang:
   • Lenaneo la Sistimi
   • Li-Bits tsa Ngoliso ea Sistimi

Ntlafatsa Firmware U sebelisa Menu ea Sisteme 

1. Kenya karete ea microSD / USB (e nang le lifoldara tse nepahetseng tsa firmware) ho XL Prime OCS.
2. Tobetsa 'me u tšoare konopo ea Sisteme metsotsoana e mengata ho bonts'a skrine ea ho hlaphoheloa ea sistimi.
3. Khetha khetho ea System Upgrade ho hlahisa fensetere e latelang ea Upgrade Media.
4. Khetha SD Card (A) :bakeng sa ho ntlafatsa firmware ho tloha kareteng ea microSD kapa USB (B: ) bakeng sa ho ntlafatsa firmware ho tloha USB.
   Ntlafatso ea firmware e tla qala ka mor'a phatlalatso.

Li-Bits tsa Ngoliso ea Sistimi tse Sebelisitsoeng Bakeng sa Ntlafatso ea Firmware

• %SR154.9 - E behiloe ke mosebelisi ho ntlafatsa firmware ka karete ea microSD.
• %SR154.10 - E behiloe ke mosebelisi ho ntlafatsa firmware ka USB.
• %SR154.11 - E behiloe ke firmware ho kopa tiisetso bakeng sa ho ntlafatsa firmware, ho tsosolosa %SR154.9 / %SR154.10. Ha mosebelisi a seta bocha SR154.11, ts'ebetso ea ntlafatso ea qala.
• %SR154.12 - Ho beha ntlha ena holimo (ON) ho ke ke ha boloka mananeo / mefuta-futa ka mor'a ho ntlafatsa firmware. Ho beha karolo ena tlase (OFF) ho tla boloka mananeo / mefuta e fapaneng ka mor'a ntlafatso ea firmware.
• %SR154.14 - Haeba ntlafatso ea firmware e sa hlokehe, joale %SR154.14 e tla behoa. Bakeng sa mohlalaampLe: Haeba firmware ho OCS le ho microSD / USB e tšoana.
• % SR154.15 - Nyenyane ena e tla beoa ke firmware haeba ho na le phoso leha e le efe ea ho ntlafatsa firmware e kang firmware e sieo file.

Sekrine sa Splash se Hlophisehang le Senotlolo sa Slide
Skrine sa tloaelo sa ho phatloha le senotlolo sa li-slide (se sebetsang ho XLW Prime feela) se ka nchafatsoa ho likarolo tsa OCS Prime.

HLOKOMELA:

• Mosebelisi o tlameha ho theha splash.jpg ka qeto e nepahetseng ho latela mohlala o sebelisitsoeng.
• XL10 Prime – 640 x 480
• XL6 Prime –800 x 480 (viewsebaka se khonang se tlosoa ho tloha lehlakoreng le letšehali ka lipikselse tse 42).
• XLW Prime - 800 x 480
• Key7.bmp e sebelisoang bakeng sa XLW prime OCS e lokela ho ba 68 x 480 resolution.
  • XL4 Prime – 320 x 240
  • XL7 Prime – 800 x 480
• Skrine se ikhethileng sa splash e tlameha ho ba setšoantšo sa .jpg file le filelebitso Splash.jpg.
• Sets'oants'o sa li-slide-out tsa senotlolo sa tloaelo se tlameha ho ba .bmp file le filelebitso Key7.bmp.
• Beha tloaelo files ho USD kapa USB ebe o kena ho OCS.
•  Tobetsa 'me u tšoare Senotlolo sa Sistimi ho fihlela Screen ea Pholoso ea Sistimi e hlaha.
• Khetha Fetola Sisteme Graphics.
• Khetha e nepahetseng file tsela. Haeba setšoantšo sa tloaelo se nepahetseng files li fumanoa tseleng e khethiloeng ea USD kapa USB, ebe yuniti ea mantlha ea OCS e tla nchafatsoa le tsona files.

Tšehetso ea tekheniki

Amerika e leboea:
Mohala: 1-877-665-5666
Fax: 317 639-4279
Web: https://hornerautomation.com
Lengolo-tsoibila: techsppt@heapg.com

Europe:
Mohala: +353-21-4321266
Fax: +353-21-4321826
Web: http://www.hornerautomation.eu
Lengolo-tsoibila: tech.support@horner-apg.com

MAN1362_04_EN_Prime_FW

Litokomane / Lisebelisoa

HORNER AUTOMATION XL Prime Series OCS Prime Controllers [pdf] Bukana ea Mosebelisi XL Prime Series, XL Prime Series OCS Prime Controllers, OCS Prime Controllers, Prime Controllers, Controllers

Litšupiso

• Bukana ea Mosebelisi