Groove Synthesis 3rd Wave OS 1.8 Sampling Sehlomathiso Bukana ea Mosebelisi

Sampkena ka kotloloho ho 3rd Wave:
1. Hokela mohloli oa hau oa molumo le molumo ho jack karolong e ka morao ea 3rd Wave.
2. Tobetsa konopo ea lefats'e 'me u tsamaise ho ea ho laola sample ho hlophisa memori ho sebelisa Soft Knob 1.
3. Khetha "tsamaea" u sebelisa Soft Knob 2.
4. Ka har'a sample skrineng sa memori, tobetsa "Ncha" ho boloka rekoto e ncha mohopolong.
5. Fetola phaello ea ho kenya 'me u be le 3rd Wave bakeng sa ho rekota ho sample skrine ea ho rekota.
6. Ho fetola ho kenya sample rate, e ea skrineng se latelang ka ho tobetsa Soft Button 4 ebe u khetha sample tekanyo (48 kHz, 24 kHz, kapa 12 kHz).
7. Netefatsa hore molumo o ntlafetseng oa mohloli oa hau oa molumo o sebelisa Soft Knob 4 (ho kenya chelete) ho qoba ho khaola.

Groove Synthesis:

Ho khetha joalo kaamplebelo la 24 kHz kapa 12 kHz le tla fokotsa sampqeto le ho senya mohopolo o fokolang ho feta sampmatla a 48 kHz.

Ho sebelisa Sampli-oscillators:

Sebelisa sampli-oscillator li le mong kapa li kopane le li-oscillator tse tloaelehileng tsa wavetable le li-analog ho theha melumo e rarahaneng.

LBH

P: Ke bokae sampnako ea ling e fumaneha ka 3rd Wave?
- A: 3rd Wave e fana ka metsotsoana e 35 ea sampnako e telele ho 48 kHz, ka tlase ho sample litekanyetso tse lumellang nako e telele sampnako e telele.
P: Na nka fetola botebo bo fokolang ba joalo kaample ntle le ho fetola data ea mantlha?
- A: Ee, o ka beha botebo bo fokolang ba joalo kaample ho 16-bit, 12-bit, kapa 8-bit ka mor'a ho kenya kapa ho rekota ntle le ho fetola s ea pele ka ho sa feleng.ample data.

Ho tloha ka mofuta oa 1.8 oa OS, 3rd Wave e na le mofuta o mocha oa oscillator - mofuta oa "S" - o bapalang s.ampntle le hore o rekotile kapa o rekile ka har'a synthesizer. Mofuta oa "S" oscillator ha e le hantle ke setshelo sa li-multi-samples le litlhophiso tsa bona ka bomong. Ho sebelisa "S" oscillator, u tlameha ho qala ho rekota kapa ho kenya sampho kena Leqhubung la 3. Joale u lokela ho abela sampho ea ka bongata bo khethehilengample setshelo molemong oa ho fihlella li-multi-sample ka konopo e tsokoang, joalo ka ha o ne o ka etsa ka wavetable e tloaelehileng kapa sebopeho sa maqhubu a analoge. Re bua ka setshelo sena e le "slot" mme ke kamoo se hlahang ka har'a sampli-skrini tse amanang le ling ho 3rd Wave. E 'ngoe le e' ngoe ea li-multi-sample slot e ka ba le e le 'ngoe sample kapa pokello ya ho fihla ho tse robedi tse ngataamples ho hasana ka har'a keyboard. E mong le e mong sample ka har'a li-multi-sample slot e ka ba le loop ea eona e ikemetseng, crossfade, key range, le litlhophiso tsa tokiso.

Sebelisa sampli-oscillator li le mong kapa li kopane le 3rd Wave's standard wavetable le virtual analog oscillators ho etsa melumo e rarahaneng le e qobellang.

litlhoko tsa molumo:

molumo oa monophonic (ka sebopeho sa .wav ha o rekoa ka USB)
samplitefiso: ho tloha ho 48 kHz ho isa ho 10 kHz ha e rekoa ho tsoa ho USB

botebo hanyane: 16-bit, 12-bit, 8-bit

3rd Wave e na le 3.3 MB ea memori bakeng sa sample data. Sena se lumella ho fihlela metsotsoana e 35 ea sampnako ea ho sebetsa ke 48 kHz. Samples le tlase sample rate sebelisa memori e fokolang. Haeba u batla ho eketsa sampling nako ka litšenyehelo tsa botšepehi, leka ho sebelisa e leamplebelo la 24 kHz kapa 12 kHz. Li-sample litekanyetso li hlahisa molumo oa grungier o ts'oanang le vin e tlaasetagesamplers.

Ho phaella moo, ka mor'a ho kenya kapa ho rekota, o ka beha botebo bo fokolang ba e leample ho 16-bit, 12-bit, kapa 8-bit ntle le ho fetola s ea mantlha ka ho sa feleng.ample data. Botebo ba tlase-tlase bo sebelisa mohopolo o lekanang le oa botebo-bonyane.

Ho eketsa Samples ho Leqhubu la 3

Ho na le mekhoa e 'meli ea ho eketsa sampho ea ho 3rd Wave:

Rekota ka kotloloho molumo oa jack karolong e ka morao ea 3rd Wave

Kenya mofuta oa mono-format .wav file ho tloha khomphuteng ea hau ho ea ho 3rd Wave ka USB

Sampling Ka ho toba ho 3rd Wave

Ho rekota joalo kaampke kene ka kotloloho ho 3rd Wave:

Hokela mohloli oa hau oa molumo le molumo ho jack karolong e ka morao ea 3rd Wave.

Tobetsa konopo ea lefats'e 'me u sebelise Soft Knob 1 ho tsamaisetsa ho tsamaiso ea sample tlhophiso ea memori.
Fetola Soft Knob 2 ho khetha ho ea.
Ka har'a sample skrineng sa memori, tobetsa Soft Button 1 (e ncha). E ncha sampskrineng sa ho rekota sea hlaha. Mona o ka fetola phaello ea ho kenya letsoho 'me oa thusa 3rd Wave bakeng sa ho rekota.
- Ho khetha joalo kaamplebelo la 24 kHz kapa 12 kHz le tla fokotsa sample resolution (le botshepehi) le ho senya mohopolo o fokolang ho feta sampmatla a 48 kHz.
Haeba u batla ho fetola ho kenya sample rate pele o rekota sample, tobetsa Soft Button 4 ho ea skrineng se latelang, ebe o tobetsa Options. Sebelisa Soft Knob 1 ho khetha sample tekanyo (48 kHz, 24 kHz, kapa 12 kHz). Ha o qetile, tobetsa Konopo e Bonolo 1 ho khutlela skrineng se fetileng sa 4. Ho sample skrineng sa memori, tobetsa Soft Button 1 (e ncha). E ncha sampskrineng sa ho rekota sea hlaha. Mona o ka fetola phaello ea ho kenya letsoho 'me oa thusa 3rd Wave bakeng sa ho rekota.

Ha u se u loketse, tobetsa Soft Button 1 (letsoho) ebe u bapala mohloli oa hau oa molumo. Ka ho rekota ho hlometse, 3rd Wave e tla qala ho rekota ka bo eona ha e bona lets'oao le tsoang mohloling oa molumo. E tla emisa ho rekota ka bo eona ha lets'oao le fela.
Tobetsa Soft Button 2 (bapala) ho utloa sample u hapile. Haeba u batla ho rekota hape sample, tobetsa Soft Button 1 (letsoho) 'me u phete mohato

Hang ha sample e hapiloe, o ka fokotsa bolelele ba eona ka ho fetola Soft Knob 1 (qala) ho lokisa ntlha ea ho qala le Soft Knob 2 (qetellong) ho lokisa ntlha ea ho qetela. Mafelo a mathomo le a mafelelo a bontšhwa mo kerafong yeo e nago le methalo e putswa.
Haeba u thabile ka sample, tobetsa Konopo e Bonolo ea 3 (boloka) ho ea ho boloka sample skrine. Sheba "Ho boloka le ho Abela Samples to a Slot” leqepheng la 5 bakeng sa lintlha tse mabapi le litlhophiso tse fapaneng tseo u tla li fumana moo.

Ho kenya Samples ho tswa ho Computer e le .wav files

Mokhoa oa bobeli oa ho eketsa samples to the 3rd Wave ke ho li kenya khomphuteng ea hau. The files e tlameha ho ba monophonic .wav files.

Ha o kenya .wav file, 3rd Wave e tla e fetolela ho sebopeho sa 16-bit ka khetho ea ho theola botebo ha o e abela sekotjana. E tla bala le ho reka kantle ho naha sample litekanyetso ho tloha ho 48 kHz ho ea ho 10 kHz.

Ho kenya e leample ho tsoa komporong ea hau joalo ka .wav file:

Hokela 3rd Wave khomphuteng ea hau u sebelisa sehokelo sa USB se ka morao ho synth. Ha e se e hokahantsoe, 3rd Wave e tla hlaha komporong ea hau ea komporo joalo ka koloi e kantle e bitsoang "third wave."
Bula foldara ea "audio" ho 3rd Wave. Etsa bonnete ba hore ha ho na tse teng files foldareng. Haeba li teng files foldareng, li tlose pele u eketsa tse ncha.
Kopitsa sampe tsoa komporong ea hau ho ea foldareng ea "audio" ho 3rd Wave.
Tobetsa konopo ea lefats'e 'me u sebelise Soft Knob 1 ho tsamaisetsa ho tsamaiso ea sample tlhophiso ea memori.
Fetola Soft Knob 2 ho khetha ho ea.
Ka har'a sample skrineng sa memori, tobetsa Soft Button 1 (e ncha). E ncha sampskrineng sa ho rekota sea hlaha.
Tobetsa Soft Button 4 (motsu o ka ho le letona) ho bona likhetho tse ling.
Ka skrineng se hlahang, tobetsa Soft Button 2 (load file). Lebitso la file seo u se kopitsitseng se hlaha skrineng. Tobetsa Soft Button 4 (ok) ho kenya faele file.
Tobetsa Soft Button 2 (bapala) ho utloa sample u hapile.
Hang ha sample e hapiloe, o ka fokotsa bolelele ba eona ka ho fetola Soft Knob 1 (qala) ho lokisa ntlha ea ho qala le Soft Knob 2 (qetellong) ho lokisa ntlha ea ho qetela. Mafelo a mathomo le a mafelelo a bontšhwa mo kerafong yeo e nago le methalo e putswa.
Haeba u thabile ka sample, tobetsa Konopo e Bonolo ea 3 (boloka) ho ea ho boloka sample skrine. Sheba "Ho boloka le ho Abela Samples to a Slot” leqepheng la 5 bakeng sa lintlha tse mabapi le litlhophiso tse fapaneng tseo u tla li fumana moo.

Ho boloka le ho Abela Samples ho slot

Ha o abela joalo kaample ho sekotjana bakeng sa ho bapala u ka seta likhetho tse 'maloa ho s e abetsoengample, ho kenyeletsoa lebitso la eona, motso oo e o abetsoeng, botebo ba eona, le tse ling.

Taba ea bohlokoa ke hore na ke li-multi-sample sekotjana u tla pholosa sample kena. Haeba u e boloka sebakeng se secha, se se nang letho, setshelo se tla ba le s e le 'ngoe feelaample ho eona. U ka boela ua boloka sample ho sejaneng se seng se ntse se le teng (se seng se ntse se e-na le bonyane s e le 'ngoe e talaample) o tla theha li-multi-sample. Li-multi-s life kapa lifeampsekotjana le ka ba le ho fihlela ho tse robeli fapaneng samples.

Ho abela joalo kaample ho slot:

Ho boloka sample skrineng, sebelisa Soft Knob 1 ho khetha sample slot ea memori. Ka kamehla, sena se tla hlophisoa ho sets'oants'o sa memori sa pele se se nang letho. Ho boloka sample ho setshelo se se nang letho ho tla bopa sekotjana se secha se nang le s ena feelaample.
Ntle le moo, sebelisa Soft Knob 1 ho khetha setshelo se seng se na le bonyane sample ho eona haeba u batla ho eketsa sekotjana se teng. U ka ba le metsotso e ka bang 8ampka sekotjana, 'me u ka li hasanya ho keyboard ka ho abela lintlha tsa tsona tse fapaneng (sheba ka tlase).
Ho abela motso note oa e leample, tobetsa konopo e tsamaisanang le keyboard ea 3rd Wave. Ha u bapala molaetsa ona, sample tla ba ka lebelo le tšoanang le leo le rekotiloeng. E 'ngoe le e 'ngoe e abetsoe sample sekotjana se na le sebaka se fihlang ho li-octave tse peli ka holimo kapa ka tlase ho noto e fanoeng. Letoto le itšetlehile ka hore na tse ling sampLes ho sot e tšoanang e abetsoe le seo u se kenyang joalo ka mefuta e kaholimo le e tlase bakeng sa s enaample.

Sebelisa Soft Knob 2 ho beha botebo ba hanyane hore e be 16-bit, 12-bit, kapa 8-bit, ho latela khetho ea hau. Botebo bo tlase bo fokotsa botšepehi empa bo sebelisa mohopolo o lekanang le oa botebo bo phahameng
Sebelisa Soft Knob 3 le Soft Knob 4 ho reha sample.
Ha o qetile, tobetsa Soft Button 4 (ok) ho e abela sekotjana seo u se khethileng le ho se boloka mohopolong o kahare.

Ka mor'a hore u fane kaample ho sekotjana, le sampskrine ea ho hlophisa ea hlaha. (Sheba “Boloka Sample skrine” leqepheng la 6.) Mona o ka loop sample, lokisa ntlha ea eona ea ho qala le ea ho qetela, le tse ling. Sheba "Editing Samples” bakeng sa tlhaiso-leseling e batsi.

Boloka Sample skrine

Hang e leample e abetsoe sekotjana, o ka e fihlella ka konopo ea wavetable karolong ea oscillator ea 3rd Wave ebe o e bapala. E tla hlaha sehlopheng sa "S", se latelang li-waveform tsa analoge tse fumanehang sehlopheng sa "A". Khetha "S: sekotjana se nang le sample(s) ho e bapala le ho e sebelisa lenaneong.

Bulk Loading .wav Files ho Sample Memori

O ka kenya tse ngata tse tala .wav files ho tsoa komporong ea hau ho ea ho 3rd Wave ka nako e le 'ngoe ka ho sebelisa sample taelo ea memori ho menu ea lefats'e. Hlokomela hore ho na le phapang pakeng tsa e tala sample le "S" sekotjana hore e leampeo e abetsoeng ho bapala ka oscillator.

The 3rd Wave e tlisa feela tse tala samples ho kena mohopolong ka taelo ea bulk load. Ha e ba abele joalo kaample slot. O tla hloka ho etsa kabelo ena bakeng sa sets e 'ngoe le e 'ngoeample ka mor'a hore u li kenye linaheng tse ling u sebelisa li-multi-multiplesamples command.

Ho jara ka bongata .wav files ho sample memori:

Hokela komporo ea hau koung ea USB e ka morao ho 3rd Wave u sebelisa thapo ea USB.
Ha e se e hokahantsoe, 3rd Wave e tla hlaha komporong ea hau ea komporo joalo ka koloi e kantle e bitsoang "third wave."

Ho komporo ea hau ea komporo, bula foldara ea "audio" ho 3rd Wave. Etsa bonnete ba hore ha ho na tse teng files foldareng. Haeba li teng files foldareng, li tlose pele u eketsa tse ncha.
Kopitsa ho fihla ho 100 mono-format .wav files ho tsoa komporong ea hau ho foldareng ea "audio" ho 3rd Wave.
Tobetsa konopo ea lefats'e 'me u sebelise Soft Knob 1 ho tsamaisetsa ho tsamaiso ea sample tlhophiso ea memori.

Fetola Soft Knob 2 ho khetha ho ea
Tobetsa Soft Button 4 (motsu o ka ho le letona) ho bona likhetho tse ling.
Tobetsa Soft Button 2 (moroalo o moholo). Ho hlaha skrine se bontšang hore na ke tse kae tsa .wav files hajoale li foldareng ea "audio" ho 3rd Wave.
Tobetsa Soft Button 4 (ok) ho kenya faele files.
Ka mor'a moo fileli rekisitsoe kantle ho naha, Manage Sampskrineng sa memori sea hlaha, se bonts'a e 'ngoe le e 'ngoe file le boholo ba eona.

Laola SampLetlapa la memori (leqephe la 2)

Kaha joale u rekile samples, u ka ba abela sample lijana. Joale li tla fumaneha sehlopheng sa "S" sa li-oscillator tse tharo 'me li ka sebelisoa mananeong a ho bapala hape.

Ho abela tse teng samples ho tloha mohopolong ho ea ho sample slots:

Tobetsa konopo ea lefats'e 'me u sebelise Soft Knob 1 ho tsamaisetsa ho litsamaiso tse ngataamples setting.
Fetola Soft Knob 2 ho khetha ho ea. The Sample Editing skrine e hlaha joalokaha ho bonoa ka tlase.

Sebelisa Soft Knob 1 ho khetha mefuta e mengata e lakatsehangample setshelo
- Sample Edit skrine
Tobetsa Soft Button 1 (eketsa ho tse ngata). Lethathamo la tsohle sampha joale ka mohopolong o hlaha joalo ka ha ho bonts'itsoe ka tlase.
Sebelisa Soft Knob 1 ho khetha sample.
Pele o tobetsa Soft Button 4 (khetha) ho abela sample ho setshelo, beha lengolo le abetsoeng bakeng sa sample ka ho tobetsa konopo ho keyboard.

Haeba u eketsa multiple samples ho setshelo (8 maximum) beha e 'ngoe le e 'ngoe ea lintlha tseo ba li abetsoeng ha u ntse u li kenya ho li 'mapa ka har'a keyboard.
Tobetsa Soft Button 4 (khetha) ho eketsa sample ho setshelo

Tse ngataample slot skrineng

Ho eketsa Samples ho sekotjana ho Bopa Multi-sample

U ka etsa li-multi-sample setshelo ka ho eketsa metsotso e fetang e le nngweample kene sekoting se le seng. Sena se na le thuso bakeng sa ho theha li-drum kits, sete ea litlamorao tsa molumo, kapa lisebelisoa tse nang le li-sampka tlase ho mefuta eohle ea keyboard.

Ho eketsa ho feta sampke kene ka setshelong:

Tobetsa konopo ea lefats'e 'me u sebelise Soft Knob 1 ho tsamaisetsa ho litsamaiso tse ngataamples setting.
Fetola Soft Knob 2 ho khetha ho ea.
Ka Sample Editing skrineng, sebelisa Soft Knob 1 ho khetha sample.
- Sample Edit skrine

Tobetsa Soft Button 1 (eketsa ho tse ngata).
Ho sebelisa e teng sample e bolokiloeng mohopolong, sebelisa Soft Knob 1 ho khetha sample.
Beha lintlha tse fanoeng bakeng sa s e khethiloengample sekotjana ka ho tobetsa konopo keyboard.
Haeba u eketsa multiple samples ho setshelo (8 maximum) beha e 'ngoe le e 'ngoe ea lintlha tseo ba li abetsoeng ha u ntse u li kenya ho li 'mapa ka har'a keyboard.

Tobetsa Soft Button 4 (khetha) ho eketsa sample ho tse ngataample setshelo.

Ho sebelisa Samples ho Preset

Hang ha u se u tlisitse le ho fana ka e le 'ngoe kapa ho feta samples ho sekotjana itseng, u ka sebelisa bona ka lenaneo. U tla sebelisa konopo ea wavetable karolong ea oscillator ea 3rd Wave ho li fumana. Li-multis tse abetsoengample li-container li hlaha sehlopheng sa "S", se latelang li-waveform tsa analoge tse fumanehang sehlopheng sa "A".

Ho sebelisa sample(s) e abetsoeng sekotjana lenaneong:

Karolong ea oscillator, fetola konopo ea wavetable ho ea sehlopheng sa "S" sa melumo. Sehlopha sena se thathamisa mefuta e fapaneng ea li-multi-sample libaka tseo u li entseng.
Khetha sample sekotjana e nang le batlang samp(s).
Bapala keyboard ho utloa sample.
Tsoela pele ho rala molumo ka ho lokisa li-filters, lienfelopo, modulation, litlamorao le liparamente tse ling kamoo u neng u tloaetse ho etsa.

Haeba joalo kaample e sebelisoa lenaneong, o ka e hlophisa kapele ka ho tobetsa Soft Button 2 (sample) skrineng se nepahetseng sa oscillator. The sampskrine ea editing e tla hlaha. Mona o ka koala sample, lokisa ntlha ea eona ea ho qala le ea ho qetela, hlophisa lebitso la eona, le tse ling.

Ho hlophisa Samples

Hang ha u se u laetse samples ho 3rd Wave le ho ba abela li-slots, u ka li hlophisa ka mekhoa e fapaneng. Sena se kenyelletsa looping, ho fetola tokiso, le ho lokisa libaka tsa ho qala kapa tsa ho qetela. Litlhophiso tsena ha li bolokoe mohloling sample ka boeona, empa ho latela ketsahalo ea sample ka har'a mefuta e mengata e itsengample slot.

Sena se bolela hore o ka beha liparamente tse fapaneng bakeng sa s e tšoanangample ka tsela e fapaneng ka slots fapaneng, kapa esita le ka sekotjana tšoanang haeba sample hlaha makhetlo a mangata sekotjana seo. U ka khona, mohlalaample, fetola qalo kapa ntlha ea ho qetela ea sample, li-setting tsa loop ea eona, tokiso ea eona, joalo-joalo ketsahalong ka 'ngoe e fapaneng. Ho na le boholo ba li-multi-s tse robeliample libaka ka sekotjana.

Mokhoa o atlehang ka ho fetesisa oa ho fetola le ho fetola tlhahlobo ho joalo kaample ke ho e abela batho ba bangataample slot mme u thehe lenaneo le e sebelisang ho e 'ngoe ea li-oscillator e le hore u ka e bapala ho tsoa ho keyboard ha u ntse u etsa liphetoho. Mesebetsi e meng e kang looping e ka hlahlojoa ka botlalo ka tsela ena. Sheba "Ho sebelisa Samples in a Preset” leqepheng la 10 bakeng sa litaelo tsa ho etsa sena.

Hang e leample e abeloa ho batho ba bangataample slot mme e sebelisoa lenaneong, o ka e hlophisa ka potlako ka ho bulela konopo ea wavetable ho oscillator e sebelisang s.ample ebe o tobetsa Soft Button 2 (sample). The sampskrine ea editing e tla hlaha. Mona o ka koala sample, lokisa ntlha ea eona ea ho qala le ea ho qetela, hlophisa lebitso la eona, le tse ling.

Ho hlophisa joalo kaampLe:

Tobetsa konopo ea lefats'e 'me u sebelise Soft Knob 1 ho tsamaisetsa ho litsamaiso tse ngataamples setting.
Fetola Soft Knob 2 ho khetha ho ea.
Ka Sample skrine ea ho hlophisa, sebelisa Soft Knob 1 ho khetha mefuta e mengata e lakatsehangample sekotjana, ebe sebelisa Soft Knob 2 ho khetha a lakatsa sample ka boeona. The sample hlaha pontshong

Ho Fetola Lintlha tsa ho Qala le ho Qetela

Ho lokisa ntlha ea ho qala ho bapala ea sample, fetola Soft Knob 3. Tobetsa play ho utloa phello. Mohala o moputsoa qalong ea waveform ponts'o e bonts'a sebaka sa ho qala ho bapala.
Tobetsa Konopo ea 3 (play) ho utloa phello.
Ho lokisa ntlha ea ho qetela ea sample, fetola Soft Knob 4. Mohala o moputsoa qetellong ea sebopeho sa maqhubu ponts'o e bonts'a pheletso ea ho bapala.
Tobetsa Konopo e Bonolo ea 3 (bapala) kapa bapala molaetsa ho keyboard ho utloa sephetho. (Etsa bonnete ba hore u sebelisa lenaneo le sebelisang sample 'me li bapala ka har'a mefuta e fapaneng moo hona joale sample e sebetsa.)

Tsoela pele ho lokisa lintlha tsa ho qala le ho qetela kamoo u batlang. Ha u khotsofetse, boloka lenaneo ka ho tobetsa konopo ea ho ngola karolong e ka pele. Sena se tla boloka qalo le qetello ho li-multi-sample sekotjana ho phaella ho pholosa lenaneo.

Loping

Ho theha le ho hlophisa loops e sebetsang, o hloka ho hlahloba sample ka ho e bapala keyboard. Ho etsa sena o hloka ho abela sample ho tse ngataample slot 'me u e sebelise ho seta esale pele e le hore u ka e qala ho tsoa ho keyboard ha u ntse u etsa liphetoho. Sheba "Ho sebelisa Samples in a Preset” leqepheng la 10 bakeng sa litaelo tsa ho etsa sena. Hang e leampLe e sebelisoa ho seta esale pele, o ka e hlophisa kapele ka ho bulela konopo ea wavetable ho oscillator e sebelisang s.ampebe o tobetsa Soft Button 2 (sample). The sampskrine ea editing e tla hlaha. Mona o ka koala sample, lokisa ntlha ea eona ea ho qala le ea ho qetela, hlophisa lebitso la eona, le tse ling.

Ho loop joalo kaample ho sample editing skrine:

Tobetsa Soft Button 2 (loop) ho fihlella skrineng sa looping.

Ho bulela looping, tobetsa Soft Button 2 (khetho ea loop). Tobetsa konopo ena khafetsa ho khetha mofuta oa looping oo u o batlang.
- Likhetho ke:
- Ho theoha. Ka mokhoa ona, sampLe tla bapala ho tloha qalong ho isa qetellong e le "thunya e le 'ngoe." E ke ke ea koala kapa ea pheta ntle le haeba e ka qala hape.
- Ho qala hang ha molaetsa o butsoe. Mokgweng ona, molaetsa o tla tswelapele ho tswella ha o ntse o tshwere molaetsa. Hang ha molaetsa o lokollotsoe, looping e emisa le karolo ea post-loop ea sample (haeba le teng) le tla bapala.
- Looping e dula e le teng. Mokhoeng ona, molaetsa o tla tsoela pele ho tsubella ha u ntse u tšoere molaetsa le hang ha u lokolla molaetsa. Sena se lumella e khutšoanyane haholo samples ho tsoela pele ho bapala ka nako e telele ha karolo ea tokollo e tšoarella le haeba sample ka boeona e khutšoanyane.
Ha looping e butswe, mela e mefubedu e bontsha sebaka sa ho qala le ho qetela. Ho lokisa tsena, sebelisa Soft Knob 3 (loop start) le Soft Knob 4 (loop end).
Ho hlophisa phapang pakeng tsa qalo le qetellong ea lupu, tobetsa Soft Button 3 (crossfade).

Sebelisa Soft Knob 2 ho khetha mofuta oa crossfade.
- Likhetho ke:
- molumo o lekanang. Khetho ena e loketse lintho tse bonahalang tse lumellanang le mohato - ka mantsoe a mang, moo molumo qalong le qetellong ea lupu li tšoanang ka molumo le waveshape. Khetho ena e etsa hore ho be le mehala e fapaneng e thusang ho boloka molumo oa kakaretso o tsitsitse nakong ea ha o kopana.
- matla a lekanang. Khetho ena e lumellana hantle le lintho tse sa lumellaneng le mohato - ka mantsoe a mang, moo molumo qalong le qetellong ea lupu e fapaneng haholo ka molumo le waveshape. Khetho ena e theha sinusoidal crossfade e leng -3dB bohareng ba fade. Sena se thusa ho boloka molumo o akaretsang o sa fetohe nakong ea ha o kopana.
- tima. Khetho ena e tima crossfading. Ha o ntse o putlama, o tla utloa ho tobetsa ha loop e etsahala ntle le haeba molumo o hokahane hantle 'me molumo o bapiloe lintlheng tse peli tsa loop.
Sebelisa Soft Knob 2 ho khetha bolelele ba crossfade. Bolelele bo bontšoa ka milliseconds. Bolelele ba crossfade bo ka fetela ho bolelele bo felletseng ba lupu.
Ho hlahloba loop, bapala keyboard ea 3rd Wave.
Ho lokisa sebaka sa ho qala le ho qetela, Tobetsa Bonolo Button 1 ho khutlela ho sample edit skrine.

Mela e khubelu qalong le qetellong ea sampLe bonts'a sebaka sa ho qala le sebaka sa ho qetela sa loop.
Sebelisa Soft Knob 3 ho lokisa sebaka sa ho qala loop.
Sebelisa Soft Knob 4 ho lokisa ntlha e qetellang ea lupu.

Ho hlahloba loop, bapala keyboard ea 3rd Wave. (Etsa bonnete ba hore u sebelisa lenaneo le sebelisang sample 'me li bapala ka har'a mefuta e fapaneng moo hona joale sample e sebetsa.)
Tsoela pele ho lokisa loop ho qala le ho qetela ha u ntse u hlahloba sample Haeba ho hlokahala, leka mefuta e fapaneng ea li-crossfade le bolelele bo fapaneng.
Ha o khotsofetse, boloka se seng esale pele ka ho tobetsa konopo ea ho ngola phanele e ka pele. Sena se tla boloka loop le li-setting tsa crossfade ho li-multi-sample sekotjana ho phaella ho pholosa lenaneo

Li-parameter tse ling ho Sample Edit Screen

Ho na le li-parameter tse ling tse 'maloa tseo u ka li fihlelang ho Sample Edit skrine ka ho sebelisa Soft Button 1 (motsu o ka ho le letšehali) le Soft Button 2 (motsu o ka ho le letona).

Sample Edit skrine

KOPIA: Kopitsa li-multi-samples ho sekotjana se secha. Sena se bohlokoa haeba u na le li-presets tse ngata u sebelisa li-multi-s tse tšoanangample slot. Haeba u etsa liphetoho ho slot, litlhophiso tsohle tse e sebelisang li tla fetoha. Maemong a mang, hoa lakatseha ho kopitsa sekotjana se secha haeba u batla ho fetola molumo 'me u se ke ua ama li-presets tse ling tse ka sebelisang s e tšoanang.ample kapa tse ngataample.

FETSA LEBITSO: E u lumella ho fetola lebitso la sample slot. Ho fetola lebitso la sekotjana, tobetsa konopo ea "edit name".
TLOSA MOLTI: E hlakola li-multi-s tse khethiloengample ho tloha sekotjana sa hona joale.
TLHAKILE SEKOTI: E tlose li-multi-s tsohleampho tloha sekotjana sa hajoale.
HLOKOMELA TLHOKOMELO: Litekanyetso tse karolong ena li u lumella ho fetola tokiso, lintlha tse fanoeng, lintlha tse tlase (noto e ka bapaloang e tlase), le lintlha tse ngata (noto e phahameng ka ho fetisisa e bapaloang) bakeng sa mefuta e mengata e khethiloeng.ample.

Likhetho tse skrineng sa lintlha tse behiloeng ke:

tokiso. E u lumella ho fetola molumo oa sample. Mefuta e fapaneng ke -100 cents ho +100 cents.
abeloa. Ho hlophisa molaetsa oo u o filoeng, tšoara konopo eo u e filoeng (Bonolo Button 2) ha u ntse u tobetsa konopo. Ho hlophisa molaetsa o abetsoeng ho tla fetola ka bo eona min le max note ho latela tse lingamphanyane ka sekotjana. Ka kamehla, e arola lethathamo la lintlha ka ho lekana ho tloha ho tse latelang tse tlase le tse holimoamples. Bophahamo ba mefuta-futa (haeba ho se tse ling tse samples are assigned) ke li-octave tse peli ka holimo le ka tlase ho sebaka seo u se abetsoeng.
min. E beha lintlha tse tlase (tse tlase tse bapaloang). Sena se na le thuso bakeng sa ho theha letoto le itseng la senotlolo bakeng sa sample ka bongataample slot. O ka seta ka bowena nomoro e tlase ka ho tobetsa konopo e tsamaisanang le ho tobetsa konopo ho keyboard. Hlokomela hore e mong le e sampLe e na le sebaka sa ho feto-fetoha ha molumo oa li-octave tse peli ka tlase ho boleng ba linoto tse fanoeng e le boholo.

max. E beha lintlha tse ngata (tse phahameng ka ho fetisisa tse bapaloang). Sena se na le thuso bakeng sa ho theha letoto le itseng la senotlolo bakeng sa sample ka makhetlo a mangataample slot. U ka seta palo e phahameng ka ho fetisisa ka ho tobetsa konopo e lumellanang le ho tobetsa konopo ho keyboard. Hlokomela hore e mong le e sampLe e na le lebelo la ho feto-fetoha ha molumo oa li-octave tse peli ka holimo ho boleng ba lintlha tse fanoeng e le bonyane.

Ho boloka le ho tsosolosa Samples le Sample Slots

Hobane sampmemori ho 3rd Wave e na le moeli, ho bohlokoa ho khona ho boloka nako le nako le ho khutlisetsa samples le libaka tsa memori tse li sebelisang. Sena se o nolofalletsa ho etsa mefuta e fapaneng ea sample sete tseo o ka li fapanyetsang ha ho hlokahala ha memori e tletse.

Hlokomela hore samples le sample slots li fapane 'me li tlameha ho romelloa kantle ho naha le ho romelloa ka thoko. Ha o romela kantle ho naha sample slot, lintlha tsohle li kenyelelitsoe moqomong oa eona o amanang file, ho kenyeletsoa le audio e tala ea sample.

Ho romela kantle ho naha ka bomong sampjoalo ka .wav files

Hokela komporo ea hau koung ea USB ea 3rd Wave u sebelisa thapo ea USB.
Ho 3rd Wave, tobetsa konopo ea lefats'e 'me u sebelise Soft Knob 1 ho tsamaisetsa ho thomello ea thepa.ample memori ho wav setting.
Fetola Soft Knob 2 ho khetha ho ea.
Khetha "Export sample memori ho WAV" ho GLOBAL menu.

Tobetsa Soft Button 4 (ok) ho qala ho romela kantle.
Leqhubu la 3 le tla boloka .wav file bakeng sa e mong le e sample.
K'homphieutheng ea hau, fumana 'me u bule foldara ea molumo ea 3rd Wave komporong ea hau.
Kopitsa thepa e romelloang kantle ho naha .wav files khomphuteng ea hau ho li boloka le ho li boloka.

Ho romela kantle sample slots:

Hokela komporo ea hau boema-kepeng ba USB ba 3rd Wave u sebelisa thapo ea USB The 3rd Wave e hlaha komporong ea hau ea komporo joalo ka koloi e bitsoang "third wave".
Ho 3rd Wave, tobetsa konopo ea lefats'e 'me u sebelise Soft Knob 1 ho tsamaisetsa ho Export S.ample Library setting.
Fetola Soft Knob 2 ho khetha ho ea.
Tobetsa Soft Button 4 (ok) ho qala ho romela kantle. Leqhubu la 3 le tla boloka .bin file bakeng sa e 'ngoe le e' ngoe ea eonaampe kenella ka har'a foldara ea eona ea molumo.

K'homphieutheng ea hau, fumana 'me u bule foldara ea molumo ea 3rd Wave.
Kopitsa thepa e romelloang kantle ho naha .bin files khomphuteng ea hau ho li boloka le ho li boloka.

Ho tsosolosa polokelo ea 3rd Wave samptse nyane ho tsoa komporong ea hau:

Hokela komporo ea hau boema-kepe ba USB ba 3rd Wave u sebelisa thapo ea USB The 3rd Wave e hlaha komporong ea hau ea komporo joalo ka koloi e bitsoang "thirdwave."

K'homphieutheng ea hau, fumana 3rd Wave .bin files tseo u neng u li rometse kantle ho naha le ho li kopitsa ho foldara ea molumo ea 3rd Wave. Etsa bonnete ba tsena files li teng foldareng ea molumo. Haeba ho na le tse ling files, \ li tlose pele u kopitsa polokelo ea .bin files.
Ho 3rd Wave, tobetsa konopo ea lefats'e.
Ho kenya e le 'ngoe file, sebelisa Soft Knob 1 ho tsamaisetsa ho tse ngata tse tsoang kantle ho nahaample setting ebe o bula Soft Knob 2 ho khetha ho ea.
Ntle le moo, ho lata palo e ngata files, sebelisa Soft Knob 1 ho tsamaisetsa ho bongata bo bongataample import setting ebe o bula Soft Knob 2 ho khetha ho ea. The files li romeloa linaheng tse ling ka tatellano ea alfabeta ho ea ka tsona file lebitso

Sebelisa Soft Knob 1 ho khetha mefuta e mengataample index ea slot eo u ka ratang ho e ngola.
Tobetsa Konopo e Bonolo ea 4 (ho lokile). The 3rd Wave e kenya lintho tse bolokiloeng kantle ho naha file(s)

Litokomane / Lisebelisoa

Groove Synthesis 3rd Wave OS 1.8 Sampling Keketso [pdf] Bukana ea Mosebelisi
OS 1.8, 3rd Wave OS 1.8 Sampling Keketso, Sehlomathiso sa 3 sa Wave, Sehlomathiso, OS 1.8 Sampling Sehlomathiso, Sehlomathiso sa OS, 1.8 Sampling Addendum, Sampling Keketso

Litšupiso

Bukana ea Mosebelisi

Groove Synthesis 3rd Wave OS 1.8 Sampling Keketso

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho sebelisa Samples ho Preset

Ho hlophisa Samples

Loping

Litokomane / Lisebelisoa

Litšupiso

Tlohela maikutlo

Hlakola karabo